Re: [Elecraft] Arecibo antenna collapses

There is also 'talk of' an ~kilometer diameter dish in a crater on the far side of the moon. That seems like a lot more fun than going rock hunting. Kind regards, Dick - KA5KKT Frank, I was the foundation project engineer for the Square Kilometer Array (which your URL refers

Re: [Elecraft] K4 in production _ Money UPDATE

nr4c's use of the present tense indicates he is an optimist. As ever, Dick - KA5KKT In this case it's a deposit. They are using the money. Sent from my iPhone ...nr4c. bill __ Elecraft

Re: [Elecraft] CW Mush

My K3S is turning CW into mush. Huge pile ups as K2D are really hard to deal with. Any suggestions other than get a K4 which I have on order? Pete, W1RM -- Suggestion - Look into other facets of amateur

[Elecraft] Diversity receive versus QRM eliminators

This is a topic that interests me. I have a wrinkle to add. Qualifications: I am a generalist rag-chew HF phone operator / listener. I'm not seeking rare DX nor exploring weak signals in general nor a competitive operator. I'm currently running K3(-s) with a DXE NCC-2 and a 2 x 6 remote

[Elecraft] Follow Up Question: Amateur Radio and Society (extra credit)

Is there are correlation between the growth of Radio Sport and the increased polarization of society? As ever, Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] The Big Three...

The Big Three Automobile manufacturers often looked towards peaks in Monday auto sales after their models performed well in NASCAR races over the weekend. I wonder if amateur radio manufacturers look for similar peaks following contest events. As ever, Dick - KA5KKT

[Elecraft] K3 - Microphone + PTT Cable

Can a 2 conductor + shield cable be used on the K3 for Mic + PTT.share the same ground..? Kind regards, Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] February..?

Test. Kind regards, Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] Speaker Wire Recommendations?

Only on an amateur radio email reflector can one get censured for improper query-discussion and in the same post receive a solution to their query..? No.probably not just hams. As ever, Dick - KA5KKT __ Elecraft mailing

Re: [Elecraft] NCC-2 noise canceller with K3s?

."So with the K3s and KPA-1500, then antennas as described, is there any reasonable way to connect this up and if yes, should I expect a noticeable improvement?" Have you tried the current antenna setup with the 1026..? Did it perform at all? If not, what were the perceived shortcomings?

Re: [Elecraft] A First Class Company

http://mailman.qth.net/pipermail/elecraft/2019-September/270620.html What could be easier..? ¯‍∖‍_‍(‍ツ‍)‍_‍/‍¯ Dick – KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Rhombic Antenna

I've never used a Rhombic antenna. However, I was able to ferret out 'Rhombic' from my scrawling's during my thirteen (seemed more like fifteen) word-per-minute code exam. Dick - KA5KKT __ Elecraft mailing list Home:

Re: [Elecraft] The ability to send screen shots

Hi Mike, I believe 'links' are allowed on this reflector. Consider having images hosted on am image hosting site and provide a link to them, if that is not forbidden. A reader can choose to look or not. I have used imgur.com I'm not aware of any problems related to doing such, but I won't be

Re: [Elecraft] Fwd: K4/K4D antenna ports.

I'm not always the best at reading between the lines. With and without the internal antenna tuner, how many ports are available for Transmit? As ever, Dick - KA5KKT Nr4c < nr4c at widomaker.com> wrote: >> How many ports does a

[Elecraft] Dual Receiver Tricks

A late model SDR Receiver (only) is said to have a soon to be released software update. I've seen a demonstration whereby using 2 antennas and a computer device, the unit will be able (to some degree?) determine signal direction. Does Elecraft have plans to develop K4D software with such

[Elecraft] KAT4 ATU

Thanks, Wayne, On the TX jack switching, does the ATU auto-recall the settings for each in a session of operation (assuming neither antenna has changed)? Dick KA5KKT > Dick Dickinson wrote: > > I notice that a KAT4 ATU is offered as a separate purchase item.  In the > brochu

[Elecraft] KAT4 ATU

I notice that a KAT4 ATU is offered as a separate purchase item. In the brochure, that ATU is listed under K4 Key Specs and Features. Is it safe to assume the basic K4(F) includes the KAT4 ATU? Perhaps the KAT4 ATU is listed separately as a possible option on a future K4 kit. Or, perhaps the

Re: [Elecraft] Elecraft K4?

Price of K4..? As a starting point, consider the "Spring Special" on the K3s/100-F - DX'er Package (Dual RX, 100W ATU, Hand Mic, Filters, P3, Hat!) $5,404.95 ($250 Discount) I still have access to the K4 page (separate tab) on Elecraft.com. I've noticed no mention of 'kit,' though the enclosure

[Elecraft] OT: WIN10

There was a time when I would have agreed with you. In this day and age, Win 10 is complicated beyond this user's capability to follow a set of mutually exclusive text menus and settings with more on/off switches than a bunch of Altair 8800's stacked to the ceiling and cascaded additionally.

[Elecraft] Future Elecraft Products

Will future Elecraft products be IoT compatible? Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This

[Elecraft] MFJ, Elecraft, Cultures

If different companies can be valued differently by individuals, why is it taboo to do so with cultures? It seems to me that the people that used to say, "I don't like labels," now slap a label on every person or thought that does not meet their notion of fashionable memes. .and to Ken.

[Elecraft] K3 Feature Request

Sticky Noise Blanker.through on/off cycle and band changes. Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

Re: [Elecraft] Possibly dumb question...

K3_EZ might do the trick, but I can't get it to install anymore. Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] Tinnitus and the K3 RX EQ and Related Variables

Age 70. I have a different hearing related problem as well as tinnitus. Background noise on my rig above about 2.4kHz seems awfully hissy to me. Above that point I have to start using the filters in my head to try and shut the hissing out. The mental filtering takes some effort and can lead to

Re: [Elecraft] Purpose of this group

As far as 'purpose,' I don't recall that Elecraft has ever made a formal statement on the matter. I for one appreciates 'some' of the other than 'Elecraft technical' that goes on. I do not receive the messages via email. I do keep a browser page open most all the time I'm at my computer. The

Re: [Elecraft] Will there be a K4

If you want to be on the safe side, but don’t want to wait forever, you might consider that Elecraft sometimes makes major announcements here → 70th International DX Convention * April 12-14, 2019 * Visalia, California Dick - KA5KKT

Re: [Elecraft] whats a updated K3 called?

For those who dwell far to the right of the decimal point (rather than in caves), I suppose there could be a whole alphabet of suffix designations. My precise intent was a light-hearted, generic characterization. My K3 (Vintage - Upgraded) is not currently up for sale. Dick - KA5KKT

[Elecraft] whats a updated K3 called?

The term 'Vintage' is often used on eBay to impart certain aspects of an item. A K3S might be 'Modern.' An updated K3 could be 'Modernized Vintage.' Dick - KA5KKT __ Elecraft mailing list Home:

Re: [Elecraft] OT: [was Flumoxed]

No need for tutorials for me at this time. Now that I understand that when contributors use the term ‘dipole,’ it can encompass just about anything with two legs generally headed away from each other. Yes, yes, I understand there are many here that can turn that statement into argument…no

Re: [Elecraft] Less Than Perfect Antennas [was Flumoxed]

Oh…I guess I tend to think of dipoles as being linear in configuration…such as horizontal dipole, etc. Dick – KA5KKT --- An inverted vee IS a dipole. -John NI0K Dick Dickinson wrote on 12/7/2018 2

Re: [Elecraft] Less Than Perfect Antennas [was Flumoxed]

Why is there so much promotion of dipole antennas over inverted vee type antennas? Kindly, Dick – KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] [K3] SWR - Numerical Indication

Hi Andy, Thanks for sharing your thoughts. Do you find a high degree of correlation between your (assumed) K3 and KAT500 SWR readings across various levels of SWR? Kindly, Dick - KA5KKT ANDY DURBIN

Re: [Elecraft] [K3] SWR - Numerical Indication

the antenna and system. John KN5L On 12/2/18 12:16 AM, Dick Dickinson wrote: > I have a full-size monoband vertical for 40 meters. Simple > architectural aluminum tapering from 1 ¼” (?) in 6’ telescoping > sections. The radial field is designed to provide a 50

Re: [Elecraft] [K3] SWR - Numerical Indication

or: https://www.allaboutcircuits.com/tools/vswr-return-loss-calculator/ 20.6 dB Return Loss computes to VSWR = 1.222 Therefore, the best lowest estimated K3 VSWR, assuming a 20 dB coupler, is about 1.2. Check my numbers. John KN5L On 7/27/18 9:58 AM, Dick Dickinson wrote: > I've not

[Elecraft] Web Page Note

I was attempting to download the Elecraft Frequency Memory Editor. It evoked an Alert: 550 Failed to change directory. I do have a copy of the latest, so no loss for me. .just FYI for the site manager. Kindly, Dick - KA5KKT

[Elecraft] K3_EZ Installation

> > I would recommend you unzip it to a new folder and then run the setup.exe. > > 73, > Don W3FPR > >> On 9/30/2018 4:37 PM, Dick Dickinson wrote: >> I'm on a recent Windows 10 fresh build. I'm not quite comprehending the >> installation process

[Elecraft] K3_EZ Installation

I'm on a recent Windows 10 fresh build. I'm not quite comprehending the installation process for K3_EZ V8. I have a zipped file which contains an a setup.exe, K3_EZ.application and a folder of Application Files. Further inside the Application Files folder is another, K3_EZ_2_0_0_7 folder

[Elecraft] OT: bandconditions.com

Pardon the OT post. Bandconditions.com has been a great resource for observing the (very) general conditions on the HF bands. A couple of weeks ago a post was offered that the site would be offline for two weeks and was to have returned this past Friday evening. Apparently some software was

[Elecraft] Survey and summary: Elecraft K3/K3S panadapter

resent. >That is not the case for the receiver in the K3 or K3S, so adding it there >would involve adding a SDR. >On Fri, Jul 27, 2018 at 2:21 PM Dick Dickinson >wrote: >> Ever the contrarian here, I note the KX3 has I/Q output. Why not a module >> for the K3/S rather than th

[Elecraft] Survey and summary: Elecraft K3/K3S panadapter solutions

Ever the contrarian here, I note the KX3 has I/Q output. Why not a module for the K3/S rather than the P3..? Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] [K3] SWR - Numerical Indication

I've noticed that I'm not showing a reading of less than 1.1:1 SWR on my antennas per K3 SWR Numerical Readout. K3EZ will record 1.0:1 SWR in band sweeps. Can the K3(S) Numerical Display show 1.0:1 SWR? If so, is there a likely reason why K3EZ will show 1.0:1 while my K3 will only go as far

[Elecraft] K3S VS: IC-7300

The sun hasn't begun to set and the fireworks are already going off... Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] P3 vs LP-Pan / NaP3

I use a K3 along with a LP-Pan and a K3 and a Windows computer. I consider myself to be a very casual operator. I can't remember when I was last engaged in other than friendly SSB QSO operation. NaP3 is usually in operation when my K3 is on. I use no other accessory software for specialty

[Elecraft] P3 vs LP-Pan / NaP3

Perhaps an individual's goals and criteria could make it a little less 'apples to oranges.' Dick - KA5KKT Bill DeVore maxrcul at gmail.com Fri Mar 23 14:55:17 EDT 2018 Is a P3 vs LP-Pan / NaP3 a fair comparison?

[Elecraft] Antenna Analyzer

Thanks folks for the rundown on current small Antenna Analyzers. Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] OT: G5RV trivia

It seems like as of late, the G5RV has been surpassed as the most mentioned antenna on the airwaves. I now here more instances of the 'off-center fed dipole.' __ Elecraft mailing list Home:

[Elecraft] K3: TX Gain Calibration Summary

I've just done a TX Gain Calibration. The numbers shown TX Gain Calibration Summary vary quite a bit. What is the proper way to interpret them? Best, Dick - KA5KKT __ Elecraft mailing list Home:

Re: [Elecraft] Mobile Radio Dreams

Bill - I'm glad you brought this up. I've been using the Yaesu FT-857D mobile for a number of years. The number one thing I appreciate about it is the remote head aspect. It is suitably sized to sit atop the column of the steering wheel. The controls are all accessible through the top open

[Elecraft] K3 - RF Gain / S-Meter

Yes.did it last night and now the 'sweet spot' is gone. 73, Dick - KA5KKT >Have you done the "RF" (really i-f) gain calibration? If not, any wackiness you >see is unsurprising. >Wes Stewart __ Elecraft mailing list

[Elecraft] K3 - RF Gain / S-Meter

I have an early, but updated K3. I used to be one who thought the K3 was often uncomfortable to listen to. In the recent past while I have reset my AGC values AND started cutting back the RF Gain. For me this has made all the difference in listenability. However I find something curious with

Re: [Elecraft] [OT] Zip Wire Misrepresentation?

“Is this becoming common practice or is wire going the way of 2X4 lumber?” “Bad analogy. The 2 X 4 inch measurement of a piece of construction lumber is before planning, or rough cut lumber. The finished dimension is more like 3½ X 1½ which hasn't changed.” Not so bad an analogy. A

Re: [Elecraft] Elecraft Centric

Other than my mobile rig, I run Elecraft. I appreciate being able to keep up with the news regarding Elecraft products. However I appreciate that Eric has chosen to let this reflector be somewhat open to general radio topics. By nature that sometimes includes discussion of non-Elecraft

[Elecraft] Test...

. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

Re: [Elecraft] K3S Microphones

I use a Yaesu MD-100A8x 'desk mike,' but in a boom. Dynamic, no bias. 73, Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] K3/K3S noise blanker performance greatly enhanced (at my QTH) -- need testers

The Collins 136C-1 Noise Blanker seems interesting. 73, Dick - KA5KKT _ The Collins noise receiver operated around 40 Megacycles, as we said in those days. My late friend and "Elmer", Lee, W7UVR was one of the first kids on the block to have a 136C-1 blanker to use with his

Re: [Elecraft] P3 vs. other panadapter options

The LP-Pan will work fine with some of the more recent motherboard based soundcards. Check for quality and bandwitdth. 73, Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] 4" x 4" Accessory Enclosure

Message- From: James Bennett [mailto:w6...@me.com] Sent: Wednesday, November 18, 2015 4:22 PM To: Dick Dickinson Subject: Re: [Elecraft] 4" x 4" Accessory Enclosure Clicking on its picture results in a 404 not found. The other items display in k. Jim Bennett / W6JHB Folsom, CA &

[Elecraft] 4" x 4" Accessory Enclosure

I’m not intent on steering Elecraft customers to competing products, but I found an interesting 4” x 4” x 4 ½” enclosure on an SDR site. It looks like it might match the K Line products well. On the right, down the page a bit… http://www.sdr-cube.com/ordering.html Dick – KA5KKT

Re: [Elecraft] Yaesu M.D. 100 on a boom

Ed - I use an MD-100 in a boom, though I don't rely on the MD-100 base for PTT. The Base of the MD-100 Mic takes the same type connector as the MIC input on the front panel. There may be a few options for you. 1) Consider wiring the Element of the MD-100 through an 8-pin

[Elecraft] Icom IC-7300 / Elecraft

ICOM indicates that the IC-7300 Multi-function knob selections are displayed on the upper right of the screen. That puts them right there next to the knob to be 'touched.' While I don't have an experienced opinion on touch screens, I can see the sense of that setup. I have frequently

[Elecraft] Is there a K4 on the horizon? Car radio

For mobile use, I like a head that is mountable on the steering wheel column. My current setup allows me to view the display with minimal eye diversion. Controls can be accessed through the open upper portion of the steering wheel. Dick - KA5KKT

[Elecraft] K3 build/KPA3 update - can someone measure for me...?

I get about 3.6K across the input Anderson Power Poles of my early, but up to date K3/100. 73, Dick - KA5KKT -- Hi All, getting prepped for ARRL DX next

[Elecraft] K3 - perceived RX and TX audio

Sure, merely understanding the words is fine when dealing with brief exchanges of call signs and signal reports. And pumped up, penetrating audio can help pump up your adrenalin if one finds excitement in sporting activities. The quality of comfort is a factor for many when participating in

[Elecraft] Sherwood Engineering Tests

Thumbs up to Elecraft for keeping on top of good performance. Perhaps someone will come up with and share a user modification for those who might want to explore the potential enhancement as suggested below. Best regards, Dick - KA5KKT While it is possible to reduce audio IMD

[Elecraft] K3 Feature Request

Override / Bypass for RX and TX EQ. One button macro or similar. 73, Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] Being cautious around Li-Ion Batteries

.film at 11..? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this

[Elecraft] [K3] Manual Notch Reconsidered

A recent post mentioned that the frequency and bandwidth of the K3 notch could be controlled. If the bandwidth of the manual notch can be controlled, I am unaware of how to go about it. I've found it broader than I think it needs to be. I recall seeing it applied to an SSTV waterfall and it was

Re: [Elecraft] K3 Notch causes distortion on SSB RX

What type of distortion are you hearing? Dick - KA5KKT _ I am noticing a bit of distortion on SSB signals when I enable the AUTO Notch. Is there some setting I can change to eliminate the distorted sound I am hearing now? -- GB 73 K5OAI

Re: [Elecraft] K3 Notch causes distortion on SSB RX

I suspect, as Bill has suggested, it is AGC related. Dick - KA5KKT _ hard to describe, it's like the audio is getting chopped up, not sure this would explain it, but it's kind of like the sound of someone gargling being overlayed over the signal audio. A combination of that

Re: [Elecraft] Limit topics in email

Hi, Jim, You might consider viewing the posts online in your web browser. http://mailman.qth.net/pipermail/elecraft/2014-May/date.html 73, Dick - KA5KKT _ Is there a way to limit the posts that are sent to my email address to a specific subject? I see there the option is there in

[Elecraft] K3 - Ergonomics or ?

In general, I don't take exception to the comments regarding K3 ergonomics. One of my areas of interest for enhancements lays in the realm of received / perceived audio. Often I've seen the audio qualities of the K3 mentioned. Included in the aspect of receive audio are DSP / Noise

Re: [Elecraft] Noise level..?

Why do it any other way? This thread is about as noisy as any of the rest of it. 73, Dick - KA5KKT I use the reflector without emails. No sorting, no filters, no clogged mailbox. I check the list on-line and only click on what holds interest to me. In

Re: [Elecraft] OT ... Coax DC Isolator

Are there possible precautions to take when running DC through a remote antenna (coax) switch that may go to ground when the power is off? Dick - KA5KKT __ Elecraft mailing list Home:

Re: [Elecraft] K3/K2: cumulative HF xcvr review from eHam

With 2 more reviews, the venerable Icom IC-751A would top the list at 5.0. 73, Dick - KA5KKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] Software to graph antenna SWR

K3_EZ will do that with a K3. It's a Windows program. 73, Dick - KA5KKT _ Some time ago I had this program that you could use to sweep the antenna and produce a printout of the SWR among other utilities for the K3. I have googled but cannot locate it anybody remember what it was