Hi John:
You will need a buffer amplifier between the IF output of the K3 and
even then, it will not drive the SM-220 properly. I've tried it and was not
happy with the end results. Fern
- Original Message -
From: JPHN POWELL powell.j...@xtra.co.nz
To: elecraft
Ed: I would recommend a switching power supply from Samlex either their 23
amps unit or better yet their 35 amp metered power supply as they are very
quiet.
Fern
- Original Message -
From: Ed Steeble estee...@sc.rr.com
To: K3_Discussion_Group elecraft@mailman.qth.net; k3-groups
I much agree that a panadapter would or should have been on their priority list
rather than what they've just announced especially the wattmeter portion. Fern
with K3 #412
- Original Message -
From: Steve Ellington n...@carolina.rr.com
To: Jim Miller j...@jtmiller.com; Jessie
I have a new MH-2 hand mic which I purchased with my K3 but other than try
it out, I put it back in packaging as I decided to use a dynamic hand mic
instead. Asking $50 US plus postage. 73 from Fern
__
Elecraft mailing list
Home
What does the transmit audio sound like on the hf bands? Fern
- Original Message -
From: Giulio Pico - IW3HVB iw3...@gmail.com
To: Elecraft@mailman.qth.net
Sent: Tuesday, February 10, 2009 2:39 PM
Subject: [Elecraft] Dynamic Mics on K3
I'm trying to use a dynamic mic with the K3
We'll have to assume that he DOES NOT have a call sign. I sure like that dog
attachment. Fern
- Original Message -
From: DOUGLAS ZWIEBEL doug...@gmail.com
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Monday, January 26, 2009 8:52 AM
Subject: [Elecraft] QRPNEW K3 review
Re check the configuration of the filter used in transmit. I had a similar
problem when I first put my K3 together. Fern
- Original Message -
From: N1IX
To: elecraft@mailman.qth.net
Sent: Monday, January 26, 2009 8:15 PM
Subject: [Elecraft] Power output problem with K3
I
.
73 from Fern VE7GZ
- Original Message -
From: Dr. Werner Furlan fur...@gmx.net
To: elecraft@mailman.qth.net
Sent: Friday, January 16, 2009 6:08 AM
Subject: [Elecraft] Desktop microfone for the K3
I'd like to add a desktop microphone to my K3. I have left a Yaesu MD-1
from earlier
, happens to slip and this way you won't
damage the front panel.
Good luck from Fern VE7GZ
- Original Message -
From: n...@verizon.net
To: elecraft@mailman.qth.net
Sent: Saturday, January 10, 2009 4:46 PM
Subject: [Elecraft] ESD sensitive tuning knob
I have not posted very
Ralf, just make up a simple interface between your K3 keying and the keying
input of your SB-200 or look for one of those interfaces that Yaesu had
available and I believe that Ameritron offers one as well.Fern VE7GZ
- Original Message -
From: Ralph Parker [EMAIL PROTECTED
Ken:
You'll have to tweek the oscillator in the SM-230 to center the incoming
signals in the centre of the passband of the I F . Fern
- Original Message -
From: Ken Widelitz [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Saturday, November 08, 2008 12:14 PM
Subject
have also tried a Kenwood dynamic
hand mic but found that the audio from that mic really sucked as it has way to
much bass which can be compensated some but it still is no match for my
commercial hand mic. 73 from Fern with K3 #412
- Original Message -
From: Erik N Basilier [EMAIL
microphones.
Just my 2 cents worth from Fern VE7GZ with K3 serial #412.
- Original Message -
From: Gene W2BXR [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Wednesday, October 22, 2008 6:44 PM
Subject: RE: [Elecraft] K3 What mics are proplr using for SSB?
I tried 3 mics
Looks like my internet server is having problems as I haven't seen any traffic
the past few days on here. Fern
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
on so the operator doesn't
forget to turn it on. It's an excellent feature and has been around for many
years.
Fern
- Original Message -
From: WILLIS COOKE [EMAIL PROTECTED]
To: Fern Rivard [EMAIL PROTECTED]; Elecraft Reflector
elecraft@mailman.qth.net
Sent: Tuesday, August 19
According to Kathie, if one wants the general coverage feature in the
second receiver, we will need to add a second KBPF3 band pass filter set up.
Fern
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Are the roofing filters accessible on the KRX-3 receiver without having to pull
the receiver out of the K3? Thanks from Fern
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
Ok Dick, many thanks for that info. Much appreciated. Fern
- Original Message -
From: Dick Dievendorff [EMAIL PROTECTED]
To: 'Fern Rivard' [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Tuesday, August 12, 2008 9:02 AM
Subject: RE: [Elecraft] re position of roofing filters on KRX3
unit. Fern
- Original Message -
From: Stewart Baker [EMAIL PROTECTED]
To: David Ferrington, M0XDF [EMAIL PROTECTED]
Cc: Fern Rivard [EMAIL PROTECTED]; Elecraft List
elecraft@mailman.qth.net
Sent: Monday, August 11, 2008 4:14 AM
Subject: Re: [K3] annoying resonance with internal speaker
this seriously as I
would think that they've come across that before and should have a simple fix.
Fern
- Original Message -
From: Nick-WA5BDU [EMAIL PROTECTED]
To: Fern Rivard [EMAIL PROTECTED]
Cc: Elecraft List elecraft@mailman.qth.net
Sent: Monday, August 11, 2008 5:32 AM
Subject: Re
Hi Randy:
You might want to check your power supply especially if it is a switching
type as it could be the source of your noise on those two bands.
Cheers from Fern with K3 #412
- Original Message -
From: Randy Downs [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Sunday
the way to 10 meters with 1:0 to 1 match.
Unfortunately band conditios were not very good today.
73 from Fern VE7GZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
full spec output on all bands
73 from Fern VE7GZ with K3 #412
- Original Message -
From: Barry Simpson [EMAIL PROTECTED]
To: 'Elecraft' elecraft@mailman.qth.net
Sent: Saturday, August 09, 2008 3:31 AM
Subject: [Elecraft] New K3 Power output problem
I have just completed building K3
have stock on
those. They are originally made for a commercial land mobile radio but the
resultant transmit is equivalent to that of the Shure 444D desk mic and that is
without even having to use the 8 band transmit audio equilizer.
73 from Fern VE7GZ
- Original Message -
From
Charles:
You must be kidding as real serious hams DO NOT use heil mics. They are
overpriced and have lousy audio. One gets much nice transmit audio using good
quality dynamic microphone rather than those cheap elecret cartridges.
- Original Message -
From: Charles Harpole [EMAIL
Anybody in the pacific northwest that has installed the ESSB in their K3 as I
would like hear what it sounds like?
Fern VE7GZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
dogging a proper reply and/or fix for that?
Fern with K3 #412
- Original Message -
From: Lyle Johnson [EMAIL PROTECTED]
To: Don Ehrlich [EMAIL PROTECTED]
Cc: Elecraft Reflector elecraft@mailman.qth.net
Sent: Wednesday, July 30, 2008 9:18 PM
Subject: Re: [Elecraft] K3 KXV3 IF Output
Fern VE7GZ with K3 #412
- Original Message -
From: Tom Childers, N5GE [EMAIL PROTECTED]
To: Mike Miller [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Sent: Friday, July 11, 2008 6:17 PM
Subject: Re: [Elecraft] 1.8 or 2.1 kc Filter
On Fri, 11 Jul 2008 14:51:24 -0500, Mike Miller
The early Samlex switching power supplies were on the noisy side but they have
corrected that problem years ago. I personally use the Samlex SEC 1235M
switching supply with my K3 and certainly do not get any noise from it.
73 from Fern VE7GZ with K3 #412
- Original Message
proof of the performance
of the K3. I have owned many different receivers/transceivers over my ham
career and I honestly have not found anything yet to be the receiver in the K3.
Just my 2 cents worth from Fern with K3 #412.
The high prices of the roofing filters for the K3 and optional
bring up the
firmware version?
Fern
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
it with always someone bitchin' and nit pickin'
this awsome performing radio. Please give it a rest and let the folks at
Elecraft do their stuff.
You all have a good day from Fern with K3 #412
- Original Message -
From: Augie Hansen [EMAIL PROTECTED]
To: K9ZTV [EMAIL PROTECTED]
Cc
amplifier.
Just my 2 cents.
Fern with K3 serial #421
- Original Message -
From: Mack McCormick [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Friday, June 27, 2008 11:26 AM
Subject: [Elecraft] K3 for Field Day at 120W
Is there any problem with running my K3 on CW at 120W
Hi Mike:
Either get that power supply off the floor or put some type of cover over
the pass transistor to prevent this problem from reoccuring.
Fern
- Original Message -
From: Mike Scott [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Wednesday, May 21, 2008 6:32 AM
Subject
am anxiously waiting a
version of firmware that doesn't have any bugs left in it and I will then
upgrade.
Just my 2 cents worth from FernVE7GZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
around 2300 hz which is what you want in your
audio and gives it an excellent presence. When you get comments that your
transmit audio is great, then it is a good sign that you have it all ok.
Cheers from Fern
- Original Message -
From: Gary Gregory [EMAIL PROTECTED]
To: elecraft
K3 together is to remove enough paint on the
back side of the front panel around the holes of both the A PTO and B PTO
encoders (I never did have the problem when touch the B encoder).
Cheers from Fern VE7GZ
___
Elecraft mailing list
Post
it sound ok. Please note that elecraft
has not yet enabled that UP/DOWN feature in their software but it is coming.
73 from Fern
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
khz I F as what the received signal is.
The manual for the K3 does NOT give any information on this. Any help would be
greatly appreciated.
Thanks from Fern VE7GZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
.
Cheers from FernVE7GZ
- Original Message -
From: VE7AJJ [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Wednesday, April 09, 2008 6:57 PM
Subject: [Elecraft] Shipping update?
What say Elecraft?
Can we get a shipping update? There are a few of us still in the
queue
for a refund.
73 from Fern
- Original Message -
From: Jim Miller [EMAIL PROTECTED]
To: Ken Kopp [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Tuesday, April 08, 2008 3:55 PM
Subject: Re: [Elecraft] Import duties on amateur radio items
Duty free?? Canada?? NO - I ought a K2 on eBay
Yes Mr RF EXPERT didn't have the balls to show his call or name. He
obviously doesn't know how to use his K3 as I haven't experienced any of his
problems.
Fern
- Original Message -
From: Ken [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Monday, April 07, 2008 6:41 PM
basic so let's hope
that's the end of it!
Fern
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
or help with this
would be greatly appreciated.
Thanks from Fern
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
Well, it would have made things a lot simpler had them made the display
show 6 khz rather than 3 khz. Fern
- Original Message -
From: Jim [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Wednesday, March 26, 2008 1:04 PM
Subject: RE: [Elecraft] re bandwidth select on am mode
Could someone please help with setting in the conf menu with Auto Inf which
has choice of Nor or Auto 1. What do either choices do and what is the better
setting?
Thanks from Fern
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
for some good used ones.
73 from Fern VE7GZ with a fine K3 transceiver
- Original Message -
From: Ian White GM3SEK [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Thursday, March 20, 2008 11:31 AM
Subject: Re: [Elecraft] K3 and linear amp
Roger Marrotte wrote:
I guess
Hi Steve:
I would very much recommend getting a Shure 444D desk microphone for your
K3. I am using one with excellent transmit audio. It's a very simply job to
connect the appropriate mic connector to it.
73 from Fern VE7GZ
- Original Message -
From: n4lq [EMAIL PROTECTED
a lot of
interaction between the SM-220 and the K3. I've also tried using a 10 db
attenuator pad but still get erratic results.
Fern
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
or + 8 vdc. I will be
selling the factory electret hand mic for anyone interested.
Fern
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
50 matches
Mail list logo
