Re: [Elecraft] KXV3 RXA board vs KXV3A
The RXA mod had nothing to do with the transverters. It increased the isoation of the receive antenna on the KXV3 board. Jeff, you need to get the KXV3A, and there is an upgrade purchase price that gives you a break and you have to send your old KXV3 back to Elecraft. Stan Rife W5EWA --- On Tue, 2/9/10, Don Wilhelm w3...@embarqmail.com wrote: From: Don Wilhelm w3...@embarqmail.com Subject: Re: [Elecraft] KXV3 RXA board vs KXV3A To: Jeff KB2M k...@comcast.net Cc: elecraft@mailman.qth.net Date: Tuesday, February 9, 2010, 6:49 AM Jeff, I am not certain what you are referring to as a KXV3 with the KXV3 RXA board. If you are referring to the RX Antenna, I believe that always has been a part of the KXV3. If there was a different KXV3 RXA version, would someone please inform me. Yes, the KXV3A is required to install the K144XV - the A version has the switching for the K144XV, and the non-A version does not. I would say you need to order the KXV3_UPGR so you can be prepared when your K144XV arrives. 73, Don W3FPR Jeff KB2M wrote: Maybe I'm not awake yet, but I'm trying to figure out what the differences are between a KXV3A, and a KXV3 with the KXV3 RXA board. I'm getting close to receiving a K144XV board (ordered at Dayton) and need to know if I need the KXV3A_UPGR to work with it, or will the KXV3 with the KXV3 RXA board work. Its been awhile since I ordered the K144XV (10 months ago) and I seem to have lost track of the situation. Thanks in advance for any information... 73 Jeff kb2m __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3BSR
Thanks for the help guys, but the resolution you suggested is not what I used. I was putzing around with it after I sent the email and happened to push hold the VOX button and that seemed to reset something...I don't know exactly what happened. Maybe turning the VOX on off unlinked the VFOs somehow. I think some strange commands got sent over the serial link while I was using K3BSR. Can't say for sure but I don't recall ever pushing the SUB button until I noticed the problem. I did turn the SUB on off a couple of times but the VFOs still appeared to be linked. It seems to be ok now, so all is well that ends well. Stan Rife W5EWA --- On Fri, 1/22/10, Richard Ferch ve3...@storm.ca wrote: From: Richard Ferch ve3...@storm.ca Subject: Re: [Elecraft] K3BSR To: sr...@swbell.net Date: Friday, January 22, 2010, 3:17 PM You wrote: A B VFOs are on the same frequency and are tuning together with the right most decimal point in the B VFO flashing. How do I get it out of this mode? Your VFOs are LINKed. Hold the SUB button to unlink them. 73, Rich VE3KI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] No package yet
Richard, I still haven't received that board. Thanks, Stan Rife W5EWA Houston, TX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Amplifiers
C'mon --- On Mon, 12/22/08, Ralph Parker ve...@dccnet.com wrote: From: Ralph Parker ve...@dccnet.com Subject: [Elecraft] Amplifiers To: Elecraft@mailman.qth.net Date: Monday, December 22, 2008, 2:43 PM I just can't get my head around Ameritron (Mighty Fine Junk) by any other name as builders of quality equipment. OTOH, I think my Al-1200 is very well built. Ameritron isn't really MFJ. A few years ago, I requested that my name be put on the KPA800 waiting list. I hope it's still there. It's gonna be a great DXpedition partner for my K3. VE7XF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KPA Amplifiers
C'mon Eric, tell us that behind the scenes you guys have secretly been working on the KPAs and you have 5000 of them ready to go out the door. Can I place my order now? Stan W5EWA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 KDVR manual
When will the KDVR3 be released? Do we have a date yet? Stan W5EWA --- On Wed, 12/3/08, Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED] wrote: From: Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED] Subject: Re: [Elecraft] K3 KDVR manual To: [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Date: Wednesday, December 3, 2008, 7:22 PM Its now up on our manual download page in the K3 section. See: http://www.elecraft.com/K2_Manual_Download_Page.htm#K3 73, Eric WA6HHQ -Original Message- From: Ian Maude [EMAIL PROTECTED] To: Elecraft Reflector elecraft@mailman.qth.net Sent: Wed, 3 Dec 2008 12:40 pm Subject: [Elecraft] K3 KDVR manual Any chance of getting a look at the manual guys? I want to 'build it' in anticipation of receiving mine soon :) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Split while using Diversity
I've been trying to decide whether or not to ask this question, because I didn't want to appear too dumb. What exactly is the advantage of diversity receive? Is it for weak signal work specifically? Can someone give me a quick run down on this? I've never had a rig that would do this before, so I am not familiar with the concept. I admit to not keeping up with the K3 feature list and manual. Go ahead and flog me now. Stan W5EWA --- On Wed, 12/3/08, K2MK [EMAIL PROTECTED] wrote: From: K2MK [EMAIL PROTECTED] Subject: Re: [Elecraft] Split while using Diversity To: [EMAIL PROTECTED], Elecraft Reflector elecraft@mailman.qth.net Date: Wednesday, December 3, 2008, 5:43 PM Ed: That's it. I just tried it. I wasn't holding the SUB button long enough. When it displays DIVRSTY, VFO B tracks VFO A as before. But when you activate SPLIT, you can tune VFO B to a different transmit frequency but both receivers are still tuned to the original frequency. When you turn off SPLIT, the VFO B display returns to the original frequency. Thanks for the clarification. 73, Mike K2MK -- From: Ed K1EP [EMAIL PROTECTED] Sent: Wednesday, December 03, 2008 6:14 PM To: K2MK [EMAIL PROTECTED]; Elecraft Reflector elecraft@mailman.qth.net Subject: Re: [Elecraft] Split while using Diversity At 12/3/2008 06:06 PM, K2MK wrote: Here's what I am experiencing with MCU 2.67. When in diversity I have VFO B tracking VFO A and I am using a separate receive antenna for VFO B. To activate SPLIT, the only way to actually change my transmit frequency is to turn the VFO B dial thus loosing my diversity. Using the A/B button allows me to listen to the original frequency on either receiver but not both. And transmission will occur on VFO B requiring me to swap back before transmitting again. That's a problem. The only way I see this working is to use XIT instead of split. I'm just not a fan of XIT. So am I missing something? 73, Mike K2MK That's basically how I operated this past weekend. But I think I realized that I was missing something. Those in the know can correct me. It has to do with the blinking second decimal point, which confused me. At times, I saw A blink, B blink, and A and B blink. I believe that there are two methods to achieve diversity. First is the way that Mike described and that I generally did over the weekend. You enable the SUB by pressing SUB. You press RX ANT to get AUX. Then you tap AB twice to get both the receivers to be the same frequency and filter settings. Then you press and hold SUB for a second to link. In this case, I believe the second decimal in VFO B will blink, indicating LINK. However, there is another method for achieving diversity. If you press and hold SUB for two seconds, first you will see LINK and then DIVRSTY. I believe in this case, the second decimal in VFO A will blink and the settings indicated on VFO A will control both receivers and set the sub antenna to AUX. This allows you to use VFO B for SPLIT or a temp register. Is this interpretation correct??? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] OT - Hakko soldering station recommendion
I have the FP-102 and it has been a great station. I also have an 808 that is indespensible for desoldering. Very happy with the Hakko stuff. Stan W5EWA --- On Fri, 10/10/08, Ron D'Eau Claire [EMAIL PROTECTED] wrote: From: Ron D'Eau Claire [EMAIL PROTECTED] Subject: RE: [Elecraft] OT - Hakko soldering station recommendion To: 'Ken Kopp' [EMAIL PROTECTED], Elecraft@mailman.qth.net Date: Friday, October 10, 2008, 4:47 PM _filtered #yiv2058333594 { font-family:Cambria Math;} _filtered #yiv2058333594 { font-family:Calibri;} _filtered #yiv2058333594 { font-family:Tahoma;} _filtered #yiv2058333594 {margin:1.0in 1.0in 1.0in 1.0in;} #yiv2058333594 P.MsoNormal { FONT-SIZE:12pt;MARGIN:0in 0in 0pt;FONT-FAMILY:Times New Roman, serif;} #yiv2058333594 LI.MsoNormal { FONT-SIZE:12pt;MARGIN:0in 0in 0pt;FONT-FAMILY:Times New Roman, serif;} #yiv2058333594 DIV.MsoNormal { FONT-SIZE:12pt;MARGIN:0in 0in 0pt;FONT-FAMILY:Times New Roman, serif;} #yiv2058333594 A:link { COLOR:blue;TEXT-DECORATION:underline;} #yiv2058333594 SPAN.MsoHyperlink { COLOR:blue;TEXT-DECORATION:underline;} #yiv2058333594 A:visited { COLOR:purple;TEXT-DECORATION:underline;} #yiv2058333594 SPAN.MsoHyperlinkFollowed { COLOR:purple;TEXT-DECORATION:underline;} #yiv2058333594 SPAN.EmailStyle17 { COLOR:#1f497d;FONT-FAMILY:Calibri, sans-serif;} #yiv2058333594 .MsoChpDefault { FONT-SIZE:10pt;} #yiv2058333594 DIV.Section1 { } Hakko 936 here too. Done yeoman service for years. Ron AC7AC -Original Message- I use a Hakko 936 that suits me to a tee. I also have a Hakko 808 desoldering tool, which is very useful when you need it. 73 de Dick, K6KR From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ken Kopp Sent: Thursday, October 09, 2008 9:13 PM To: elecraft@mailman.qth.net Subject: [Elecraft] OT - Hakko soldering station recommendion I'm sure I'll get a number of different recommendations, but which Hakko soldering station do you like? 73! Ken Kopp - K0PP [EMAIL PROTECTED] Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 6m preamp news?
Hi Eric, I haven't monitored for a while. Is this something that is external to the K3? Is it a mast mount pre-amp with switching capabilities?? Please clue me in or point me to some info. Thanks, Stan W5EWA --- On Fri, 10/10/08, Eric Swartz WA6HHQ - Elecraft [EMAIL PROTECTED] wrote: From: Eric Swartz WA6HHQ - Elecraft [EMAIL PROTECTED] Subject: Re: [Elecraft] 6m preamp news? To: Bob Tellefsen [EMAIL PROTECTED] Cc: Reflector Elecraft elecraft@mailman.qth.net Date: Friday, October 10, 2008, 4:46 PM I'll be putting it up on the order page and on the main web page by Monday. We've released it to production and it will be shipping by mid next month. Eric _..._ Bob Tellefsen wrote: Does anyone know how the 6m preamp kit is coming along. Been a while since the field testers got theirs. I'd think it should be close by now. Anyone know? 73, Bob N6WG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Firmware 2.19
Also with my K3 there is a significant reduction in the audio level when NR is on. I don't see how the AGC would affect the NR. It's just a function of the filtering that reduces the volume when the NR is activated. Or is there something I am missing. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Roger Stein wrote: Hi Roy, Try AGC THR = 5 and AGC SLP = 8and or experiment with varying those two parameters as you monitor a signal. My AF gain is at the 9 o'clock position, AFX on, BIN option. I use a couple of small RCA/Radio Shack speakers. To my ears, the difference between NR on/off is really close to the same audio level. But as Lyle says, experiment, it is quite revealing!! Best of luck! 73, Roger WA7BOC K3 #75 On Wed, Jul 23, 2008 at 7:34 PM, Roy Morris [EMAIL PROTECTED] wrote: I think I am about ready to go back to 2.16. I find the receive audio to be too weak with NR and attenuation engaged. Roy Morris W4WFB ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K#: 2.20 / 1.88
Is there an audio gain function for the NR? My audio is substantially reduced when the NR is engaged. More so if I have an aggressive setting for the NR? Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 David and Dianne on Comcast wrote: Running my SLP at 7 and THR at 6. I may run it at SLP 8 and THR 5. I'm not sure yet. The linearity of the new SLP function works very well. My AF is on high range and running at 9 O'clock position. The NR audio level seems much improved and balanced between engaged and not engaged, perhaps even a little too loud with NR engaged. I like it. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Firmware 2.19
Hi Mike. I have 2.20 loaded and my comments below are what I am experiencing. I don't see how it's possible to have the same level of audio with the NR engaged. The filtering will naturally reduce the audio level, unless the K3 has a gain adjustment for the filtered audio like the K2 has. If turn NR on, I have to turn the AF gain up some. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Mike Harris wrote: Hi Stan, Beta 2.20 has been released to correct this problem. It seems much improved with me and #345 Regards, Mike VP8NO - Original Message - From: Stan Rife [EMAIL PROTECTED] To: Elecraft Elecraft@mailman.qth.net Sent: Thursday, July 24, 2008 6:45 PM Subject: Re: [Elecraft] K3 Firmware 2.19 |Also with my K3 there is a significant reduction in the audio level | when NR is on. I don't see how the AGC would affect the NR. It's just a | function of the filtering that reduces the volume when the NR is | activated. Or is there something I am missing. | | Stan | W5EWA | Houston, TX | K2/100 SN 4216 | K3/100 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Firmware 2.19
I guess I should also say that this has always been my experience with the K3 NR. I really didn't think it was a problem though. I just thought I would add my comments because other folks started saying that they had the same level of audio with the NR on or off. Maybe their NR is not workingwho knows. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Stan Rife wrote: Hi Mike. I have 2.20 loaded and my comments below are what I am experiencing. I don't see how it's possible to have the same level of audio with the NR engaged. The filtering will naturally reduce the audio level, unless the K3 has a gain adjustment for the filtered audio like the K2 has. If turn NR on, I have to turn the AF gain up some. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Mike Harris wrote: Hi Stan, Beta 2.20 has been released to correct this problem. It seems much improved with me and #345 Regards, Mike VP8NO - Original Message - From: Stan Rife [EMAIL PROTECTED] To: Elecraft Elecraft@mailman.qth.net Sent: Thursday, July 24, 2008 6:45 PM Subject: Re: [Elecraft] K3 Firmware 2.19 |Also with my K3 there is a significant reduction in the audio level | when NR is on. I don't see how the AGC would affect the NR. It's just a | function of the filtering that reduces the volume when the NR is | activated. Or is there something I am missing. | | Stan | W5EWA | Houston, TX | K2/100 SN 4216 | K3/100 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 V2.20/1..88
Wow, I really must have something set differently than everyone else. Or maybe the absence of any noise this evening is making the difference. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Lee Buller wrote: Just loaded my first beta. I've been a chicken for several weeks waiting till things went into production. 2.02 to 2.20 is a lot of updates to the firmware. I got tired of waiting. Everything went hunkydory. Set the SLP at 8 and Threshold at 6 and works great! The NR button works differently now The weak signal pops up out of the noise (the noise is abated) and I can copy the station. I am listen on 40 CW. Adjusting the Noise Reduction parameters even help farther. There is not reduction of audiobut the signal just pops out. Great job for Elecraft. Lee - K0WA In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K#: 2.20 / 1.88
That's ok...it's good to check to see if I am nuts or not. hi hi Yes, listening to SSB on 20m this evening and actually there is not much noise on the band, for a change. Listening to several QSOs and turning the NR on causes a drop in audio...but then again, it always has. I haven't tried it on CW. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 n4lq wrote: In CW mode I see 8db of audio gain with NR engaged. In SSB, a reduction (not measured). It depends on what is being processed. Steve Ellington [EMAIL PROTECTED] - Original Message - From: Brett Howard [EMAIL PROTECTED] To: Stan Rife [EMAIL PROTECTED] Cc: Elecraft Elecraft@mailman.qth.net Sent: Thursday, July 24, 2008 10:49 PM Subject: Re: [Elecraft] K#: 2.20 / 1.88 Hate to ask the stupid question but do you have a signal in the passband when you activate it? If so are you using it on a CW or SSB signal when you notice this level reduction? On Thu, 2008-07-24 at 21:38 -0500, Stan Rife wrote: Is there an audio gain function for the NR? My audio is substantially reduced when the NR is engaged. More so if I have an aggressive setting for the NR? Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 David and Dianne on Comcast wrote: Running my SLP at 7 and THR at 6. I may run it at SLP 8 and THR 5. I'm not sure yet. The linearity of the new SLP function works very well. My AF is on high range and running at 9 O'clock position. The NR audio level seems much improved and balanced between engaged and not engaged, perhaps even a little too loud with NR engaged. I like it. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database: 270.5.5/1571 - Release Date: 7/24/2008 5:42 PM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 V2.20/1..88
Yes I did. I wound up with SLP set to 8 and Threshold at 5. I just changed the threshold setting to 6 and I think it made some difference. The audio with NR on is considerably louder than with previous versions of the firmware. I can really tell a difference on CW. So I think I'm ok. I had an adjacent signal just below where I was listening and with the threshold set to 5 it may have been causing a little more pumping that was causing the AGC to reduce the audio a little. Actually I'm not sure if the lower setting of the threshold creates a stronger AGC action or not. Listening to some different signals around the band revealed that I do have a little more audio with the NR on than I did with past versions of the firmware. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Brett Howard wrote: Have you messed with your AGC settings much yet? I'm looking forward to getting to play with some of that soon. On Thu, 2008-07-24 at 21:52 -0500, Stan Rife wrote: Wow, I really must have something set differently than everyone else. Or maybe the absence of any noise this evening is making the difference. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Lee Buller wrote: Just loaded my first beta. I've been a chicken for several weeks waiting till things went into production. 2.02 to 2.20 is a lot of updates to the firmware. I got tired of waiting. Everything went hunkydory. Set the SLP at 8 and Threshold at 6 and works great! The NR button works differently now The weak signal pops up out of the noise (the noise is abated) and I can copy the station. I am listen on 40 CW. Adjusting the Noise Reduction parameters even help farther. There is not reduction of audiobut the signal just pops out. Great job for Elecraft. Lee - K0WA In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KRX3 receiver
Hi Eric. Are the KRX3s going to start shipping this week as hoped? -- Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Autoinfo 1
I set Autoinfo to Auto1 and it did not seem to cause the K3 to send out RS-232 data without being polled. My impression is that this is what this option was supposed to do. I may be out in left field on this, and if so someone bring me in out of the rain please. :-) I am trying to get the K3 to send data out for the SteppIR antenna to read without having HRD running. There are times when I would like to just peruse the bands without wanting the software running, but have the SteppIR track the frequency. Has anyone done this successfully? -- Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 - v2.02
Could this be a menu item so we can enable/disable? It seems a bit confusing because of the display. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Tom Childers, N5GE wrote: On Sat, 14 Jun 2008 10:14:24 -0400, Mike Harris [EMAIL PROTECTED] wrote: Good day, I upgraded my firmware to v2.02 Friday (13th!) night and now notice the following: Previously the CMP and ALC display option was not available in CW mode. Now it is. The ALC element of this display shows six units of ALC at any power level when keyed. I guess it isn't supposed to be that way. I was caught out with this display when changing from 30M CW to 20M where the K3 was on SSB last time I used it, changed to CW and the CMP/ALC display stayed active instead of automatically reverting to SWR/RF. Had me wondering what was going on for a few seconds. Doesn't make sense to have an irrelevant display option active. Regards, Mike VP8NO [snip] Seems logical to me. If you are using ALC to control your amp drive it might be beneficial to see the rig's ALC action on CW. I suspect without an amp ALC line connected the ALC is telling you the rig is transmitting at the power you set it at and not being controlled by another device. That's what I think, but I could be wrong... Tom, N5GE - SWOT 3537 - Grid EM12jq Those who would give up Essential Liberty to purchase a little Temporary Safety deserve neither Liberty nor Safety An excerpt from a letter written in 1755 from the Assembly to the Governor of Pennsylvania. Support the entire Constitution, not just the parts you like. http://www.n5ge.com http://www.eQSL.cc/Member.cfm?N5GE ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] WHERE ARE THE KPAs
Eric/Wayne, can you give us a tidbit to tide us over on this subject. I know you guys are busy with the K3, but we would at least like to know that the KPAs are forthcoming. How about an update. Stan W5EWA Houston, TX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] New Firmware
I just checked the website for the new software and the K3 Utility did not see it. I'm still showing 01.88, 00.01 and 01.71 available. Did they take it down for some reason? Stan W5EWA Houston, TX K2 SN 4216 K3 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] New Firmware
I had forgotten that Wayne was putting this in a different folder. I got it downloaded, loaded and all is well. Thanks all for the help. Stan W5EWA Houston, TX K2 SN 4216 K3 SN 0690 [EMAIL PROTECTED] wrote: Go to ftp://ftp.elecraft.com/K3/firmware You'll need to do some reading to learn how to install the files in the utility directories so the utility will find them. I am working up to that myself. Al WA6VNN In a message dated 5/14/2008 3:22:16 P.M. Pacific Daylight Time, [EMAIL PROTECTED] writes: I just checked the website for the new software and the K3 Utility did not see it. I'm still showing 01.88, 00.01 and 01.71 available. Did they take it down for some reason? Stan W5EWA Houston, TX K2 SN 4216 K3 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com Wondering what's for Dinner Tonight? Get new twists on family favorites at AOL Food http://food.aol.com/dinner-tonight?NCID=aolfod000301. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Knob shaft and pot issues
The gritty-ness is not a problem...you are actually feeling the detents in the encoder. These are encoders and not pots. I had never noticed the slight side to side movement of the shafts. Stan Rife W5EWA Houston, TX K2 SN 4216 K3 SN 0690 G4ILO wrote: Bob K9PAG wrote: My kit K3 #818 came with the shafts on the four small dual function knobs lose and the associated pots feeling like they were gritty when turned. Sure not as smooth and nice as my ICOM 746! Wonder how many #800 units experienced this problem or is it just me? The lose shafts and gritty feeling when turned reminds me of cheap volume controls on a Chinese radio. And how many have experienced a DOA KSYN3 (synthesizer) board in your kit? In addition, how many of you have experienced missing hardware in your kit making it difficult to complete? I sure would hate to be living overseas, missing US nuts and screws, and waiting for the next boat to arrive with needed parts. Moral: Next time I will buy a radio that is fully assembled. My four dual function knobs move from side to side a bit and I suppose they could be described as gritty when turned. I hadn't considered it a problem. They do the job. I did have a faulty internal shield and a faceplate for the KIO module that was stencilled on the wrong side. Elecraft sent replacements which arrived in about a week. Fortunately neither of these were show stoppers. I agree it's frustrating, but mistakes happen. I still would rather have had the experience of assembling the K3 than avoid these minor issues by having it ready built. - Julian, G4ILO K3 s/n: 222 K2 s/n: 392 G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] VOX sensitivity problem with new firmware
YES, I had not tried it since the update yesterday, but I find it very hard to trip the VOX now with Anti-Vox at zero and the Vox gain set WAY high, and it does not want to stay in. What happened to the Vox Wayne and gang? Stan Rife W5EWA Houston, TX K2 SN 4216 K3 SN 0690 KM0O wrote: Before this latest firmware release, I would have said that the K3's VOX is the smoothest and finest I've ever used. But now, even with the sensitivity at 100 (max), I cannot get it to hold in without speaking rather loudly. Has anyone else noticed this? The antivox setting has no effect. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] VOX sensitivity problem with new firmware
Thanks Lyle. A previous setting of 8 to 10 now takes a setting of 60 to get reasonable operation...and that is without any Anti Vox. Stan Rife W5EWA Houston, TX Lyle Johnson wrote: What happened to the Vox Wayne and gang? The balance between MIC GAIN needed for good Tx operation and the amount needed for VOX was upset a bit. New code is in test as I write this that works with reasonable settings using all the mics I have here (MH2, cheap electret, Kenwood MC43S, Heil GM-5 with HC-5 and flat elements). Also LINE IN from my PC. 73, Lyle KK7P ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Pitch adjustment
The frequency steps for PITCH adjustment appear to be 50hz. Is this the only step selection for the PITCH adjustment? Stan Rife W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 - Pitch adjustment
The frequency steps for PITCH adjustment appear to be 50hz. Is this the only step selection for the PITCH adjustment? Stan Rife W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Re: losing FL5
Sorry Wayne, I meant to send this to the list. Has the method 3 been implemented for frequency calibration yet? Stan Rife W5EWA Houston, TX K2 SN 4216 K3 SN 0690 wayne burdick wrote: Hi Eric, This should not have happened. You may need to re-set the filter's center frequency using the FL5 FRQ menu entry. Typically the 200-Hz filter has an offset of around -0.90 kHz. Also make sure that FL5 BW is set to 0.20, and that you have REFCAL properly calibrated against a reference signal. 73, Wayne N6KR On May 4, 2008, at 10:00 AM, Eric wrote: Seems I lost my 200 Hz filter after the update. In config the filter is ON, everything looks OK, but al sigs are lost when FL5 kicks in when turning WIDTH. --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 FIRMWARE UPDATE: MCU 1.87, DSP 1.69 (Finally!)
This is great. With what other brand can you beat up on the developers, and see the developers humbled by their own mistakes. We understand Lyle. And I thought that was the sunset. Stan Rife W5EWA Houston, TX K2 SN 4216 K3 SN 0690 Lyle Johnson wrote: ...listening to the K3 on 29.600 FM via my FT-817 the audio sounds a bit distorted or scratchy on voice peaks which suggests that the deviation is too high. I'd like to be able to adjust this to see if it is or not. If you see a dull red glow to the west, it is my face turning beet red. Reasons/excuses aside, the released code has deviation at about 6 kHz instead of 3 kHz. This is now fixed in my development code. Meanwhile, to set the deviation using K3 Utility: Click on the Command Tester tab, in the edit line, type !dd40; and deviation should be right. This only needs to be sent once per session. If you leave the K3 on, the deviation setting should not be changed when you change modes/bands/etc. Sorry for missing this one, Julian. 73, Lyle KK7P ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Front panel rattling washer
I also have the rattling washer on the headphone jack. I have been working with tech support taking measurements and checking different things. No joy so far. Everything checks out as far as the assembly goes. I just seem to have about .050 more clearance between the shoulder of the headphone jack and the FP sheet metal than is normal, and the washer rattles. I think that .050 causes the FP/DSP assembly to be a little more difficult to get the bottom screws in when installing it on the radio than if everything were fitted properly on the FP assembly. I have to press pretty firmly on the bottom of the FP assembly to get the bottom screws started in the 2D fasteners. I think one possible fix would be to use .050 shorter standoffs between the DSP board and the FP board. That would cause the shoulder of the headphone jack to be close enough to the FP sheet metal to keep the washer from rattling, and would also allow the connectors on the FP assembly to not seat quite as far down on to the mating pins of the connectors on the RF board, therefore allowing the screws for the front panel mounting to line up easier. I belive that, at least in my case, the mating connectors for the FP and RF board are bottoming out and not allowing the sheet metal to move far enough back to line up properly, thereby causing me to have to apply more pressue to get the screw holes lined up. One caution here, is that when the clearance between the DSP and the FP boards is reduced by .050, it MAY cause contact between the front of the DSP board and the back of the FP board. The clearance looks pretty minimal in some places as it is. I may try this as a LAST resort, but I am going to continue to work with K3 support to try and find the real cause of this. I may send my front panel back and let Gary look at it so he can figure this thing out. Stan W5EWA Houston, TX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 issue with Monitor VOX
I don't know if these are related or not, but #1 when using the monitor function I hear my own voice ON frequency, but I also hear an OFF frequency copy of my signal...like it's about 1 or 2 khz away. I have tried it with and without phones and with two different microphones (MD2 Elecraft Pro Headset). If I give a whistle in to the mic I hear it off frequency. The higher I whistle, the lower the whistle from the monitor audio, and of course the lower I whistle the higher it is in frequency from the monitor audio. It's disconcerting to say the least and leads me to believe there is something not right. #2, I cannot get the VOX to work. With the VOX gain set as low as 1 or 2, any amount of mic gain causes it to go in to transmit and will not unkey until I turn the mic gain down completely (3 or so). I can turn the mic gain completely down, as well as the compression, put it in VOX mode, turn the mic gain up to 2 or 3 and it keys right away. this is with the VOX gain set at about 2 or 3 as well. I pulled the front panel off and checked for bent pins, as Gary suggested. Did not find anything wrong. Anyone have any idea?? Stan W5EWA Houston, TX David Cutter [EMAIL PROTECTED] wrote: I insist on putting a fuse on each battery terminal, preferably fixed right to the terminal. The additional voltage drop is worth the peace of mind. Car radio shops have big chunky ones at modest prices. David G3UNA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KRX3 UPDATE
Just a gentle reminder Wayne...it's 3/11 and I don't see the update for the KRX3. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KRX3 status update ???
I'm wondering too David. My K3 will probably ship in April (I hope) and I am hoping that the KRX3 comes with it. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave G. Sent: Monday, March 10, 2008 2:02 PM To: elecraft@mailman.qth.net Subject: [Elecraft] KRX3 status update ??? Hi Wayne, From the Shipping Status page.. (Status update by Monday, 3/10) Just wondering..?? Grin -- Dave G. KK7SS '65 MK III Sprite in Richland, WA Two things are infinite, the universe and human stupidity. But I'm not so sure about the universe. ... Albert Einstein. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KatieGram (K3)
H, a K2 kit huh? Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Craig D. Smith Sent: Monday, March 10, 2008 9:09 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] KatieGram (K3) Got the Katie-Gram today for K2 100 kit ordered on 22 Aug. Should be here in two weeks or so, pending my travel plans. Includes ATU, transverter I/F, General Coverage board and 6K, 2.7K, 1K and 0.5K filters. That should keep me plenty occupied until the sub receiver is available ;) 73 ... Craig AC0DS ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Question for Optivisor users
I think mine came with a #2 lens Mike. Focal distance is around 8 and still gives good magnification. I find it very comfortable as far as the distance and power. I thought I might try one that would get me a little farther away, but I am happy with the present lense so it hasn't been something that I thought I really needed to get. Stan W5EWA Mike [EMAIL PROTECTED] wrote: I know there are at least a couple of Optivisor users on the list. I wonder which number visor plates you're using for SMD work? I just bought a visor with a #3 plate. I preferred the magnification level of a #4 or #5, but the focal distance was so short with them they seemed to defeat the purpose; I'm 46 and can still see tiny parts pretty well if I get up a couple of inches from them, which I had to do with a #4 plate in order to have it be in focus. I also got an Optiloupe for it but haven't tried it yet. Just wondering if anyone has any wisdom to share. Thank you. -- 73, de Mike, KC0KBC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KUSB - Vista Issues
Has anyone tried using the Keyspan USB adapters with the K3? I have one 4 port and 2 single adapters working very well on Vista 32 home premium edition, and I'm trying to find out if they will work ok with the K3. Actually one of these is working with the K2 and I have had no problems. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KUSB - Vista Issues
Will do. Thanks for the good news Dale. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dale Wiese Sent: Friday, March 07, 2008 10:09 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KUSB - Vista Issues I've used the Keyspan 4 port adapter for years on XP, with all sorts of devices, including my K2. Right now it is tied to my mac, and my K3. No issues seen from either OS. Of course Vista is a different beast, but if it is working fine on your K2, I doubt you will have any issue with the K3. Let us know how it goes. 73, Dale On Mar 7, 2008, at 9:43 PM, Stan Rife wrote: Has anyone tried using the Keyspan USB adapters with the K3? I have one 4 port and 2 single adapters working very well on Vista 32 home premium edition, and I'm trying to find out if they will work ok with the K3. Actually one of these is working with the K2 and I have had no problems. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KRX3 option question
This from the K3 manual: The sub receiver also has the same filter options as the main receiver. Up to five crystal filters can be installed in the sub receiver, as well as a generalcoverage L-C band-pass filter module (KBPF3, pg. 42). The sub also includes an I.F. noise blanker. There are three main modules associated with the KRX3 option: the sub receiver itself; a KSYN3 synthesizer; and a second I.F. DSP. All three must be installed and enabled before the sub receiver can be used. For information on installing and configuring the sub receiver, refer to the KRX3 option installation manual. If I am interpreting this correctly, in addition to the KRX3, I have to have a second KSYN3 board and a second I.F. DSP. I don't see these as purchase-able options on the order page. Also, it appears that I would have to have an additional KBPF3 if I want the sub receiver to be general coverage...that is, in addition to having the main receiver as general coverage to begin with. I don't see having both receivers with general coverage capability. That seems a bit too redundant, and expensive. I will more than likely just have the sub as the general coverage receiver. Does the cost of the KRX3 include the second KSYN3 second IF DSP? Stan W5EWA Houston, TX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: Re: [Elecraft] K3/100 Kit #307 Lift Off
How about some Dzus (sp?) type twist lock fasteners? Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brett Howard Sent: Tuesday, January 29, 2008 4:52 PM To: [EMAIL PROTECTED]; 'David Pratt'; 'Elecraft Reflector' Subject: RE: Re: [Elecraft] K3/100 Kit #307 Lift Off I'd be willing to pay a 10 to 15 dollar adder for knurled knobs that allow one to take the top of quickly and easily to show off the guts... I'd want them to be relatively low profile though. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, January 29, 2008 2:28 AM To: David Pratt; Elecraft Reflector Subject: Re: Re: [Elecraft] K3/100 Kit #307 Lift Off If you are going to be taking them apart so often to show folks :o) perhaps some nice black knurled thumb screws would be in order. David G3UNA From: David Pratt [EMAIL PROTECTED] Date: 2008/01/29 Tue AM 09:44:00 GMT To: Elecraft Reflector elecraft@mailman.qth.net Subject: Re: [Elecraft] K3/100 Kit #307 Lift Off In a recent message, Stewart Baker [EMAIL PROTECTED] wrote Only slight negative is that there should be a few more flat black case screws supplied as spares. Exact amount needed supplied, however I am sure that I will lose one or two when I open the case to show off the craftsmanship... I'll agree to that one, Stewart. There were plenty of pan heads as spares but the flat heads were exactly the right number. Fortunately, I have three left over from the assembly of my K1. 73 -- David G4DMP Leeds, England, UK -- - Email sent from www.virginmedia.com/email Virus-checked using McAfee(R) Software and scanned for spam ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 headset jack
I plugged in my headset and used it the other day. When I unplugged it I had no audio from the external speaker jack, which is what I am using with an external speaker. Even when I unplugged the external speaker I still have no audio. The only way I can get audio now is the plug something in to the headset jack. What happens to these headset jacks? Is there a contact breaking off in there? It was never intermittent and always worked fine up until this incident. I'll have to replace it I am sure, I am just curious because I know several people have had trouble with this jack. It seems the life span on them is only a couple of years or so, at least for those of us that have the problem. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 update problem
I have a question about the drivers and the update software. Are they Vista compatible? Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Test post
Test post from yahoo home page to see if my post will get through to the list. Stan Rife W5EWA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Re: K3 NB indicator flasjing
I thought these kinds of questions were supposed to be posted to the K3 support email list. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Swartz - WA6HHQ, Elecraft Sent: Thursday, January 03, 2008 11:51 AM To: David Ferrington, M0XDF Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Re: K3 NB indicator flasjing I believe this indicates that you have set the H/W NB threshold or width to too high of a value for your current noise or signal levels, which has the noise blanker activated a majority of the time. This will usually cause an unacceptable amount of intermodulation from adjacent signals. Reduce the threshold or width setting to eliminate the flashing. 73, Eric WA6HHQ --- David Ferrington, M0XDF wrote: You know, this thread is all well and good, but no-one has yet answered the original question :) Which is: I might have missed this in the manual, but when I change the NB IF width value, I can get to a point where the NB flashes - what does this indicate? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 question
Can someone tell me what the cabinet color of the K3 is? I at first thought it was a brown color, then I thought I saw someone remark that is had been changed to black. Now I see remarks about using a black magic marker to hide the chipped paint. Is it black or brown? Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 cabinet color
Maybe my posts aren't making it to the list. I asked a question yesterday (maybe it was this morning) about the color of the K3 cabinet and no one has bothered to answer this. SOO what color is the K3...brown, black or otherwise??? Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Test Post
I unsubscribed and re-subscribed to see if it would fix my posting problem. Test. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KNB2 diagnosis
I'll admit that I am pretty gullible, until I prove otherwise, but scratching the top of a transistor as a fix Ha ha ha hac'mon now. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, December 24, 2007 11:18 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KNB2 diagnosis Chris, I installed a KNB2 in my K2 a few months ago. I didn't think it worked until I tried the scratching of Q21 as recommended. With the top off and background noise coming from the speaker, I toggled from NB1 to NB2 to OFF while I scratched the case of Q21. It worked. I saw a definite difference. With the NB on I then toggled between both threshold levels and heard the difference also. Give this technique another try. Use a small screwdriver to scratch with. Good luck. John N2YC I've never been convinced that my KNB2 worked as planned. I have the K2 open today to install the K160RX, and decided to work on the KNB2. I found the archive messages about scratching Q21. I can only get any noise out of this with the pre-amp on - don't know if that's as expected or not. No setting of the NB changes the audio through the headphones. I can tap Q21 and get a pulse on my scope, or rub the case back and forth to get something a little more continuous (but still hard to capture on the scope - despite being quite evident in the headphones). Some of the time, my pulses just die at the output of R8, which goes to ground via L1. I'm not sure exactly what I do differently when the pulse gets past - perhaps just how hard I'm tapping? If I have the NB turned off, the signal stops at pin 4 of U1 - I see pulses there, but not at pin 1. If I have the NB turned on, pin 4 is biased and pin 1 is biased even higher - but I don't see the pulses at either pin. Help? Feeling stuck here.73 de chris K6DBG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] [K3] Invoice confirmation - YES!
Good for you David. Good luck!! Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Ferrington, M0XDF Sent: Sunday, December 09, 2007 7:24 AM To: 'Elecraft Reflector' Subject: [Elecraft] [K3] Invoice confirmation - YES! I received my Invoice confirmation at 23:58 last night (Sat) - so Aptos are burning weekends to. Ordered 2-May @ 15:45z. Added lots of 'bits' to it over the period from then until now. Shipping in 7-10 days by UPS Express. Will notify when it arrives. -- A good cook is like a sorceress who dispenses happiness. -Elsa Schiaparelli, fashion designer (1890-1973) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 - Can't ship them out the door?
Hey that just moved me up the list by one. Thanks Ed. See ya. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Edward R. Breneiser Sent: Friday, December 07, 2007 1:41 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 - Can't ship them out the door? Hello all, I grew tired of waiting for a K3. Called Elecraft today and they said my August order would not be shipped out until after January sometime. Never heard of ordering a radio and having to wait around six months for it - maybe longer! I cancelled my order and asked for my deposit back. To bad Elecraft can't ship their premier product out the door in a timely manner. And yes I've been a big fan after building a K2, K1 and KX1. So now I'll Xmas shop for a new rig! It won't be a K3 - to bad. 72, Ed, WA3WSJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] RE: not about technical issues (was Shipping StatusPage)
Yeah, Chris, it's bitching...when you do it day after day after week after week. That's all we hear on the list any more is you and people like you complaining about not having your K3 when you think you should have it. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G3SJJ Sent: Friday, December 07, 2007 10:16 AM Cc: elecraft Subject: Re: [Elecraft] RE: not about technical issues (was Shipping StatusPage) Jason, with respect, this is not bitching. All people are asking for is honest and realistic communication from Elecraft. Lies and broken promises are fuelling discontent. People have contacted Elecraft directly and are constantly being fed rubbish. This is yet another email which needn't have been sent if we were kept properly informed. Honesty first, radio whenever. Chris G3SJJ Jason Milldrum wrote: However, I've become completely exhausted of this list turning into the All K3 Bitchfest, All Of The Time. I understand that some complaining is normal and justified, but if you truly have so much angst about your declining perception of the Elecraft mojo, then perhaps it's time to have a chat with Elecraft directly or cancel your order. The level of whining on the list has ruined it for me. I understand you all have every right to be mad...and I might be too if I were in your shoes. However, I feel that this topic has been allowed to dominate the list to the detriment of everyone else. So, no, I don't have to get used to it. I'm just going to unsubscribe and wash my hands of this whole mess. I'll look for technical discussion and advice elsewhere. 73, Jason Milldrum, NT7S ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] RE: not about technical issues (was Shipping StatusPage)
Not me Greg. I'm finally getting involved in this discussion and I am going to hang around and make life miserable for these miserable little boys who can't have their toys. At least until Eric un-subscribes me. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Greg Derda Sent: Friday, December 07, 2007 9:58 AM To: elecraft Subject: Re: [Elecraft] RE: not about technical issues (was Shipping StatusPage) I'll finally chime in as well, and AGREE with Jason! We have to get used to it? I've never seen so many arrogant, whining twits in my entire life!! Get a hobby! I'm outta here as well. Greg ki4mmm On Dec 7, 2007, at 10:47 AM, Jason Milldrum wrote: On Dec 7, 2007 7:17 AM, Julian G4ILO [EMAIL PROTECTED] wrote: You'll just have to get used to it. No, I don't I have a great deal of respect for people like you who contribute to ham radio in a significant and unselfish way. However, I've become completely exhausted of this list turning into the All K3 Bitchfest, All Of The Time. I understand that some complaining is normal and justified, but if you truly have so much angst about your declining perception of the Elecraft mojo, then perhaps it's time to have a chat with Elecraft directly or cancel your order. The level of whining on the list has ruined it for me. I understand you all have every right to be mad...and I might be too if I were in your shoes. However, I feel that this topic has been allowed to dominate the list to the detriment of everyone else. So, no, I don't have to get used to it. I'm just going to unsubscribe and wash my hands of this whole mess. I'll look for technical discussion and advice elsewhere. 73, Jason Milldrum, NT7S ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] RE: not about technical issues (was Shipping StatusPage)
It's just been confirmed. G4ILO was hired by Yaesu and Icom to create bad publicity for Elecraft. The big 3 just can't fade the heat. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Julian G4ILO Sent: Friday, December 07, 2007 9:17 AM To: elecraft Subject: Re: [Elecraft] RE: not about technical issues (was Shipping StatusPage) On 07/12/2007, R. Kevin Stover [EMAIL PROTECTED] wrote: Absolutely! The whining level around here is starting to get a little embarrassing. Some on the reflector sound like a bunch of third grade girls who've just found out recess is canceled. I'm still trying to figure out why people who paid VOLUNTARY deposits or were in the first run, or second run, didn't pay deposits, etc, etc, etc, Ad nauseam, are entitled to a unit by unit run down of radios going out the door. I've also noticed that the most vocal production and inventory specialists aren't in any hurry to cancel their orders. What's the word I'm looking for...? Never mind it would probably get me booted off the list. A sign of the times we live in I suppose. The intemperate attitude of some people around here is starting to get a bit irritating. Believe me, there are a lot more people who are unhappy about being kept waiting than you would know from this reflector. And some of the language used in expressing this dissatisfaction privately is sometimes a lot more blunt than has been used here, too. So let's have less of the insults, please. I'm sure Elecraft *is* doing the best it can to fulfil the outstanding orders. Unfortunately the best it can do seems to be falling a little short of what was promised. Two estimates of when my own order would ship have come and gone and now it looks like I'll have to ask for it to be postponed until the new year so that I will be here to receive it. And you wonder why *I* am frustrated? People are not cancelling their orders because they still want this radio, the reports of those lucky few who have received them are good, and because having waited this long it would be stupid to bail out now when there appears to be a glimmer of light at the end of the tunnel. Even though the glimmer seems to be getting closer with appalling slowness. As Dave W7AQK said, venting is one way of relieving the frustration of waiting. It's human nature. These shipping discussions are only going to be replaced by technical ones when more people have actual K3s to discuss and fewer people are kicking their heels waiting for them. You'll just have to get used to it. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf - -- R. Kevin Stover, ACØH -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHWViV11jxjloa2wsRAtvbAJ49W7SrxPLxiBGeWagLPvY1BhVtwQCfW7Sg GE+5KMKdf/szsyF+TfR8cvY= =XiaF -END PGP SIGNATURE- ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 - Can't ship them out the door?
Right now we are wondering how in the heck we are going to survive this ordeal. A year from now we are all going to be saying, yeah, there was no doubt in my mind that Elecraft would come through, and, gee, I sure love my new K3. When we finally get our K3 all of this will seem so fleeting and really, not much of a wait after all, especially when I consider the end result. Chill out! Nobody is trying to screw you out of anything. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Subich, W4TV Sent: Friday, December 07, 2007 3:04 PM To: 'Mike Fatchett W0MU'; elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 - Can't ship them out the door? Almost every ham rig is released and publicized long before the radio hits the market. That's true to some extent but other than the Icom 7700 and perhaps the TenTec Orion, I don't know of any that received such extensive promotion so far in advance of delivery in real quantity. In particular, I can't think of any where the manufacturer encouraged significant deposits or full payment up-front and then missed the first delivery target for those pre-paid orders by more than 90 days. I understand the temptation to announce a product at a large trade show (hamfest) even though deliveries are in the future. I understand the desire to provide an attractive availability date. I even understand problems involved in ramping up production when the initial prototype is complete and working. However, to accept orders (particularly with payment at the time of order or with significant deposits) for products that are not in production and can not possibly be delivered in a timely manner and then fail to provide realistic schedule updates is questionable - and a sure way to alienate potential customers. 73, ... Joe, W4TV -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Fatchett W0MU Sent: Friday, December 07, 2007 2:47 PM To: elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 - Can't ship them out the door? Whoohoo moving up in the queue!!! Almost every ham rig is released and publicized long before the radio hits the market. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] RE: not about technical issues (was Shipping StatusPage)
Well, they have 3400 dollars of my money, so what. Why don't you people act like responsible adults and leave Elecraft to their work. The only lies that have circulated are by those saying they have been lied to. Elecraft did'nt lie to anyone. A lie is something you tell if you intentionally intend to deceive someone. Do you people think Elecraft intended to deceive you? You people are howling like a bunch of 3rd graders that can't have their toy when they want it. You people must have been hired by Yaesu to try and create some bad publicity for Elecraft. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G3SJJ Sent: Friday, December 07, 2007 8:47 AM Cc: elecraft Subject: Re: [Elecraft] RE: not about technical issues (was Shipping StatusPage) Don, the long wait is not a problem, even though they have had $1372 of my money for 7 months and not even a personal thank you or apology. *The real problem is the constant lies and broken promises coming out of Aptos, together with the lack of explanation, in fact, virtual silence*. Those of us who placed early orders did so on the basis of the trust built up between Elecraft and its customer base. That trust has been severly damaged, not by the delays but by the breakdown of communication. Many of us had planned various activities involving our K3s. For me initially it was a small Low Power Field Day in July, then it was IARU Region SSB Field Day in September, then it was an SO2R effort in RSGB 21/28MHz Contest in October, then it was lending it to our G5W effort in CQWW, and this weekend it was supposed to be a dual mode, multi op effort in ARRL 10m contest. Each event was planned on the basis of what proved to be mis-information from Aptos. Mid January sees an RSGB contest that I have excelled in over the years. As early as May 14 this year, when I placed my order for a K3/100 plus sub receiver, I began planning for the 2008 event. Even at this this stage I cannot be sure of having my K3, and only in the past week have I had to accept I won't have the sub-rx. The way I found out was an un-announced change on the shipping date. Again going on the scant information, I have delayed arranging a pre-Christmas trip out of the country to be around if or when my K3 is delivered. I am still not sure whether it will be shipped. One person was recently told that his order placed 6 July would be delivered by the end of this year!! Numerous people have been told two weeks for several times. The way I view it at the moment is that shipping came to a halt a week ago, yet not a word. This is not the efficient, honest and friendly service we have become to expect from Elecraft. They have produced a really fantastic product and our hearts go out to the team struggling to meet the rightful demand, but lies and unbroken promises are not helping them or us. Many years ago whilst in sales and marketing of thick film hybrid modules into the defence industry I received a telephone call late one evening from the manufacturing director of a very major defence contractor. His modules were 3 weeks late and no warning or expalanation had been given. If we had told him he could have re-scheduled. I was given huge roasting and needless to say didn't sleep much that night. I did however keep my customers well informed after that. Some honest and realistic information would have prevented this email and most of the preceeding ones Chris G3SJJ Don Wilhelm wrote: By my count, it does look like there are now at least 30 K3s being shipped per week over the past 2 week period, judging from the serial numbers that have been posted on the wiki. That means that Don Rasmussen's projections are overly pessimistic. By my estimate (again judging only from the serial numbers accounted for), serial number 225 should ship well before Christmas, and they should have shipped SN 250 before the first of the year. I don't know how many are in the 1st batch, but most have figured it is less than 250. The folks at Aptos are working hard to hone their production capabilities and get these first orders shipped. It has been a long period of overtime for all of them. I will get my K3 in due time I am certain, and I am certainly not going to bug them about it - whining about it will not hurry the process and may even slow it down. 73, Don W3FPR Dave Yarnes wrote: I think it's just that a few folks need to vent a little after the long wait. But if you look at the wiki list of K3's received, output is picking up nicely. I think over 50 K3's are going out now each week--maybe more. So everyone needs to hook up their Valium drip and take a deep breath. Things will settle down soon. Dave W7AQK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber
RE: [Elecraft] RE: not about technical issues (was Shipping StatusPage)
Arrogant, whining twits...that just hit the nail squarely on the head. Good rid dents Julian. Maybe we can get some peace and quiet on the list now. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Julian G4ILO Sent: Friday, December 07, 2007 10:20 AM To: elecraft Subject: Re: [Elecraft] RE: not about technical issues (was Shipping StatusPage) Arrogant? Whining? Twits? I don't see any arguments there for why it is not legitimate to voice one's frustration over optimistic delivery estimates and broken promises. But thanks to your reasoned reply I have now decided to consider cancelling my order. I don't *need* a K3. I have a perfectly good K2. And at this point I wonder why I need a hobby pursued by people who can think of nothing better than hurl insults at others who express opinions they just don't agree with. I'm out of here, too. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf On 07/12/2007, Greg Derda [EMAIL PROTECTED] wrote: I'll finally chime in as well, and AGREE with Jason! We have to get used to it? I've never seen so many arrogant, whining twits in my entire life!! Get a hobby! I'm outta here as well. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Shipping Status Page
No Jim, it used to be a unique reflector. Now it's just a sounding board for cry babies that can't have their toys when they want them. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Sent: Friday, December 07, 2007 6:13 AM To: Vic K2VCO; Dave Yarnes Cc: elecraft Subject: RE: [Elecraft] Shipping Status Page This is unique Reflector.. I counted up all of the many messages I have received, and it seems that the majority of the messages received on this reflector are on the subject of SHIPPING, and not about the merits or technical issues of the Elecraft products themselves. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Vic K2VCO Sent: Thursday, December 06, 2007 8:50 PM To: Dave Yarnes Cc: elecraft Subject: Re: [Elecraft] Shipping Status Page Dave Yarnes wrote: And we can't really do anything about it, which only adds to the frustration. Keep in mind that the only real question is will I get my K3 before Christmas, in January, or February? This is not going to matter in the long run unless you are significantly older than even I am. I can see people saying he should talk, he's a beta tester and has had his K3 for months. True, but I received my beta test version several months after I originally expected it! Anyway, as a beta tester -- although I don't work for Elecraft and don't know all of the nitty gritty about suppliers, etc. -- I am somewhat closer to what is going on at Elecraft than others. And I can say that I see problems being solved, big improvements made, and processes smoothed out as the experiences of the early users are factored in. The fact is that unless a huge meteorite lands in Santa Cruz county, everyone is going to get their K3s, and they are going to be good radios. A watched pot never boils, so watch something else for a while and you will be pleasantly surprised when the box arrives. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco K3 no. 7 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KRX3 manual
When will we be able to get a peak at the manual for the KRX3. Is it even close to preliminary yet? Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Server rejecting my email
I seem to be having trouble with my mail being rejected by the server. The server says my email has an attachment, which it does not as far as I can tell. Ron, did you get this email ok? Thanks, Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Testing
Maybe setting up for plain text will make the difference. Don't know how it got changed. Trying to fix my email folks. Sorry for the bandwidth. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Server rejecting my email
This one seems to have made it. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stan Rife Sent: Sunday, November 11, 2007 8:39 PM To: 'Ron D'Eau Claire'; elecraft@mailman.qth.net Subject: [Elecraft] Server rejecting my email I seem to be having trouble with my mail being rejected by the server. The server says my email has an attachment, which it does not as far as I can tell. Ron, did you get this email ok? Thanks, Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3: mine is NOT on the way
That's correct. I forgot about Dave Benson's method. And I'm sure Lisa could fit that in to her daily schedule. I mean, she can't be that busy...right? ;-) Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Randy Moore Sent: Saturday, November 10, 2007 6:47 AM To: Elecraft List Subject: Re: [Elecraft] K3: mine is NOT on the way I haven't ordered my K3 yet (still saving up my pennies), but I follow every bit of info here religiously. I really don't understand this competitive sensitivity to numbers of K3s ordered/shipped and who's haven't shipped yet. Dave Benson (Smallwonder Labs) has for a long time listed every order not yet shipped on his website - by name and order date. He does this even though he may be way behind in shipping. It takes some time, but if Dave can do it (I think he's pretty much a one-man operation), I would think Elecraft could. Perhaps they could do it by this recently discovered invoice number if that is something everyone gets when they order??? Would save a lot of anxiety among the natives, and reduce traffic here. 73, Randy, KS4L Thom LaCosta wrote: Perhaps the feeling is that the actual number of orders and the type radio ordered and the number of orders shipped is seen competitive information, and thus will be masked as much as possible. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] [K3] Assembly Manual
When trying to download the K3 Assembly Manual with the following description, (8 MB) K3 Assembly Manual (Rev B, 10/28/07), I always get the 3.61 MB web version. Is the 8MB version being overhauled? Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ed Muns Sent: Saturday, November 10, 2007 8:00 PM To: [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Subject: RE: [Elecraft] [K3] KRX3 KBPF3 Question The KBPF3 mounts on the KRX3 just as it does on the RF board. The KRX3 is basically the RX portion of the RF board that mounts above the RF board, with enough space to clear the boards plugged into the RF board (KBPF3, KNB3, etc.). A KBPF3 can mount on either or both of the RF board and the KRX3 simultaneously in the same K3. 73, Ed - W0YK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, 10 November, 2007 17:35 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] [K3] KRX3 KBPF3 Question I'm confused, the KBPF3 is a fairly large board that mounts on the RF board and operates in bypass to the ham band only BPF. Has anyone seen the KRX3 schematic or an image that tells the full story? Al WA6VNN In a message dated 11/10/2007 3:23:21 P.M. Pacific Standard Time, [EMAIL PROTECTED] writes: If you have two KBPF3s. ;) Ed Wayne Burdick wrote: Or both, if you want general-coverage receive on both. Ed Muns wrote: In the long run I plan on using the KFL3B-FM in the primary RX and the KFL3A-6K in the secondary RX for listening to broadcast stations. Afaik this would require the KBPF3 to be installed on the KRX3 board and not on the main RF board. As a clone of the main receiver this should be possible, shouldn't it? Did I overlook something? That is correct. The KBPF3 can be installed on either receiver. Wayne N6KR --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ** See what's new at http://www.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 Assembly Manual......web or full???
I was just curious what happened to the Hi Res version (8 MB). Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Craig Rairdin Sent: Saturday, November 10, 2007 10:48 PM To: elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 Assembly Manual..web or full??? The Web version has low-res pictures and that makes it smaller. If it helps any I built my K3 from that version of the assembly manual and the pictures are sufficiently detailed to determine what you're supposed to do. There are two places where the pictures are of a different (older? newer?) version of the RF board (figs 56 and 58), but it's completely obvious what they're trying to show you (the important components were in the same location on my board as in the picture; it was two nearby components that were different). Fig 57 shows the components in the location that matched my board. There are pictures of a couple connectors that need to mate when you're attaching the front panel assembly to the RF board assembly that have plenty of resolution but the connectors themselves were harder to see on my boards than they were in the pictures (Fig 54). And it doesn't matter anyway because that step is difficult no matter what pictures they show you. There are some pictures very early in the process of locations of standoffs that aren't very helpful (figures 7 and 9) but it's because they don't give enough context, not because they aren't of sufficient resolution. If you refer back to the location of the mixer board and noise blanker board in figure 1 it will give you a clue where the standoffs go. Don't forget to check the site for an update after you get your K3. The one in the box (or the one you printed out today) may be older than the one on the Web site. Also don't forget to apply the errata. Craig NZ0R K3/100 #25 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, November 10, 2007 10:15 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Assembly Manual..web or full??? Stan wrote: When trying to download the K3 Assembly Manual with the following description, (8 MB) K3 Assembly Manual (Rev B, 10/28/07), I always get the 3.61 MB web version. Is the 8MB version being overhauled? No I get the same thing and mentioned it a week or two ago and it hasn't been changed. They may be too busy trying to catch up. Michael N2ZDB ** See what's new at http://www.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 #36 Up and Running
Alright!! #36...now we are moving along a little bit. Who's got number 40...or number 45? Keep them doggies rollin', Rawhide. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rowland Sent: Thursday, November 08, 2007 12:18 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 #36 Up and Running Well I managed to get the K3 up and running last night. Passesd all tests first time. The build took me around 8 hours but I did not hurry. I think its a must to sort out the hardware into containers, not only does this aid assembly time it reduces the risk of errors. I invested in an ESD mat for this build I thought it was about time... Im sure I destroyed an ADC when building my K2 some years ago Im sure this was due to static. I was a little concerned after installation of the Noise blanker board as it did not sit level to the RF board. I thought that the standoff I had installed was a little short. Measuring it it was correct as per the manual . Removing the board got me a little worried as there appeared to be a pin missing from J77and the hole in the socket was filled! I thought that somehow the pin had broken off. Phone call to Elecraft Tech Help releived my worries here. Not all the pins are present and used on a lot of the connectors of the boards in the kit. The reason it was not sitting as it should non the sscoket was that the unused pin had been cut and left a little long. Filing this down cured the problem. The siting of the front panel board on the panel itself took me 45 mins I think I was a little timid it did not seem to want to go all the way at the mic socket end. the LEDS were lining up OK but after a while it just slipped into place everything looking perfect. It is a tight fit but then it has to be. Be patient here! The three TMP cables connecting the KREF3/RF BOARD/ KSYN3 boards were diffficult to insert in their respective sockets mine were a very tight fit 1 cable had been crimped over the plug end itself but I managed to reshape this using pliers and insert it without damage to the cable or the socket. you have to get them perpendicular to get them in easily and applyiny an even pressure It was an enjoyable build to see those boards coming together but I have to admit not nearly as enjoyable as the K2/ K1. Anderson POWERPOLE CONNECTORS SOLDERED The smell of flux, that brings back memories. Power up! This worried me hiss from the speakers. Antenna connected. No signals. Dont be alarmed you have to get into the menu system and set the filters per mode this brought things to life. The audio sounds suberb... CW and SSB. I have the 2.7Khz SSB and 400Hz CW filters. Updated the software today using a serial cable. Took a few minutes, no problems. Im not going to get much time if any to play today but from impressions so far this rig oozes quality from the received audio point of view. A quick play with the DSP on SSB signals last night was impressive you will see what I mean when yours arrives. Thats it so far. Worth the wait? Certainly looks like it. Thank you Wayne Eric and all at Elecraft . Regards Rowland G4APO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [OT] K2 Navigator Interface
I made my own cable. I used the 1/8 stereo plug for the RCV audio, and I believe I use a 1/8 mono for the TX audio because I have one of the Heil microphone adapter cables that breaks out the Keying and TX audio ckts to seperate 1/4 1/8 jacks accordingly. Made it pretty simple versus having to wire up a mic plug and switch that out all the time. I use a series of 1/8 1/4 (RadioShack) Y adapter cables and have my Heil headset hooked up all the time as well as the audio cables from the Navigator. Actually I have to disco the TX audio plug from the headset to eliminate the open microphone on TX while using the Navigator. I used stereo and mono cables from Radio shack that were already made up. I just cut them in half and used which ever half had the right connector on it and soldered them all in to a DB25 male connector. Turned out kind of professional looking. That is probably the expensive route to go, but it still didn't cost the 48 bucks that US Interface wants for a made up cable. Since I was using the Heil microphone adapter cable, I would have had to modify their cable anyway. Stan Rife W5EWA David Wilburn [EMAIL PROTECTED] wrote: Has anyone used the USInterface.com, Navigator, with the K2? - David Wilburn [EMAIL PROTECTED] K4DGW K2 S/N 5982 On Wed, 2007-11-07 at 14:03 +0100, Simon Brown (HB9DRV) wrote: FWIW I have a USInterface.com Navigator arriving soon. One USB cable to plug into the PC, the Navigator provides high-quality soundcard, COM ports, FSK, K1EL and nice knobs on the front. If you or anyone else is after a good solution then this is worth considering. Simon Brown, HB9DRV - Original Message - From: Julian G4ILO That's useful, Simon. I've had a few direct replies about the serial cable wiring but what about the audio connections? Would standard 3.5mm to 3.5mm stereo jack cables suffice? Is any resistive attenuator needed, such as I've used in the home made cables for most other radios? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [OT] K2 Navigator Interface
Yes David, I just bought that interface and have it working with the K2. Stan Rife W5EWA David Wilburn [EMAIL PROTECTED] wrote: Has anyone used the USInterface.com, Navigator, with the K2? - David Wilburn [EMAIL PROTECTED] K4DGW K2 S/N 5982 On Wed, 2007-11-07 at 14:03 +0100, Simon Brown (HB9DRV) wrote: FWIW I have a USInterface.com Navigator arriving soon. One USB cable to plug into the PC, the Navigator provides high-quality soundcard, COM ports, FSK, K1EL and nice knobs on the front. If you or anyone else is after a good solution then this is worth considering. Simon Brown, HB9DRV - Original Message - From: Julian G4ILO That's useful, Simon. I've had a few direct replies about the serial cable wiring but what about the audio connections? Would standard 3.5mm to 3.5mm stereo jack cables suffice? Is any resistive attenuator needed, such as I've used in the home made cables for most other radios? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 assembly pictures posted
I was also thinking about the reckless abandon look of the mess of torroids on the boards. when I hand crafted my K2 I made sure things were nice and neat so I could say with pride that I built that. If someone looks inside my K3 I'm definitely going to make sure they know that I did not make that mess in there. I suppose it makes no difference in the operation of the radio, but my god, don't those board assemblers have any pride in their work? Wayne, Eric...do you have any control over the quality control coming from the assemblers? Stan Rife W5EWA Tom Hall [EMAIL PROTECTED] wrote: Interesting, but that jumble of toroids on the rf board is just plain ugly. I like 'em neatly lined up like on my K2. I guess it's a matter of taste. I like something that looks like it was crafted with the care of human hands instead of everything being lined up perfectly by a heartless robot. It's amusing to me to think that the sales person that took my order for a K3 could be the same person who may have wound my toroids. It makes me feel like I'm getting a custom radio. I think the K3 looks really beautiful. Mine is a May 1st purchase so it can't be long now. Craig, thanks for the pictures, they provide a nice perspective on things to come. Tom, AK2B ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3s Start Shipping!
Outstanding Eric. I knew it was going to happen today. Actually I thought it would be yesterday, but I forgot about the holiday (I KNOW you guys took the holiday). ;-) I was just putting my order together and figuring out what I could live without for now, but the live without list was pretty short. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Swartz - WA6HHQ, Elecraft Sent: Tuesday, October 09, 2007 8:48 PM To: Elecraft List Subject: [Elecraft] K3s Start Shipping! The first production K3s started shipping today! (Oct 9th) :-) We worked overtime last week and through the weekend to get everything in order. We had the usual last minute glitches (missing hardware we thought we had received, MORE toroid winding in Aptos, minor PCB assembly errors, documentation snafu's etc.) but we were able to resolve everything in time for shipping today. Whew! Here's a picture of Lisa with the first K3/100 kit of this batch going out the door. :-) http://www.elecraft.com/K3/Lisa%20with%20K3%20a%20sm.JPG After today's batch of K3s we will pause shipping for two days to let the dust settle and to make doubly sure we have everything in proper order. We will continue testing and packaging the K3 kits tomorrow and Thursday. We'll resume shipping on Friday and should continue shipping on a daily basis, Monday-Friday, after that. This week we are beginning with the kit versions of the K3. Mid next week the first built K3s will begin rolling out the door. The rest of this week we will be contacting those of you that will be shipping over the next two weeks. Due to the very high number of orders that we received the first day at Visalia and via FAX/Internet (actually the first couple of weeks!) we will not be shipping all the first day orders on the first day, or two, or three. :-) But we are working hard to get everyone's K3 out the door quickly. Initial shipment rates will of course start out in small groups and slowly accelerate to more units per day as we ramp up. But our top priority to to make sure we get you a complete and quality product. Please be patient with us. We're just as anxious as you to get your radio on its way. The K3 Operating manual is complete and I'll be posting it and the K3 option manuals to the web by end of day tomorrow. I'll post a note here when they are on-line. Now, where is that champagne... 73, Eric WA6HHQ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 status update is not the same as when will itship
It appears that tomorrow is the big day! Haven't seen any updates pushing the ship date out any further. You guys can start checking your mail boxes after tomorrow. I bet some have specified overnight shipping. That's what I would do. Who's going to be first on the air? Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] New picture - K3 front panel
That color scheme is really nice. Is the K3 color scheme changing to this? I vote yes! It really makes all the labeling stand out nicely. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ken N9VV Sent: Tuesday, September 04, 2007 9:57 AM To: John Reiser Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] New picture - K3 front panel How about the handy Daily Web Archive list http://mailman.qth.net/pipermail/elecraft/ John Reiser wrote: Hi All, I inadvertently deleted the message concerning the graphic Thanks and 73, John, W2GW K3 (2nd run) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KAT100
Eric, I'm glad I saw this KAT100 thread. I wanted to ask if the KAT100 will tune ok on 6m. I looked through the specs and the rest of the manual and could only find reference to 160 through 10. The specs did not include a frequency coverage range. Stan Rife W5EWA Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED] wrote: The KAT2 20W ATU can be installed in the K2 with these options. The KAT100 is an external only unit. 73, Eric Scott McDowell wrote: Hello Can the KAT100 be installed inside the K2/100 when I have the following options already installed? KSB2, K160RX, KNB2, KDSP2, and KIO2. I would like to have everything inside the K2/100 case if that is possible. Thanks Scott N5SM _ Who's that on the Red Carpet? Play win glamorous prizes. http://club.live.com/red_carpet_reveal.aspx?icid=REDCARPET_hotmailtextlink3 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KAT100
Didn't someone physically attach a KAT100 to the bottom of a K2 a while back. Seems like I saw something about that on the reflector. It made it look like one big cabinet. Stan Rife W5EWA Don Wilhelm [EMAIL PROTECTED] wrote: Scott, If you have the KIO2 installed then you must actually have the KPA100 installed in an external EC2 enclosure - if that is true, then yes, the KPA100 and the KAT100-2 can live together in the external EC2 enclosure. BUT, if you are trying to fit everything into one K2 package with the KPA100 as the top cover on a K2, then neither the KIO2 nor the KAT100 will fit - the KPA100 takes the entire available physical space. The KPA100 does include the KIO2 functions, but not the KIO2 itself. 73, Don W3FPR Scott McDowell wrote: Hello Can the KAT100 be installed inside the K2/100 when I have the following options already installed? KSB2, K160RX, KNB2, KDSP2, and KIO2. I would like to have everything inside the K2/100 case if that is possible. Thanks Scott N5SM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] The Elecraft MH2 Hand Mic is Back!
Is there a performance difference? If so, can I trade my old one in on the new one? Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of wayne burdick Sent: Wednesday, June 20, 2007 3:22 PM To: Elecraft Reflector Subject: [Elecraft] The Elecraft MH2 Hand Mic is Back! Our redesigned MH2 hand mic is now shipping. It has the same high-quality electret element, same sound, and same dimensions as the original, but with more rugged internal construction. The MH2 is the perfect match for both the K3 and K2 transceivers. You can see it at: http://www.elecraft.com/elecraft_mics.htm 73, Wayne N6KR --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Regarding electric fence wire
I have had good luck with the fence wire that I use. It is Aluminum wire and seems to hold up good. I have a 20M dipole up now that is made with it. It has not been up very long. But I have used this same wire for ground radials for my vertical and it holds up nicely, except when I or the dogs trip over it and break it. It does not have much tensile strength as you can imagine. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ken Kopp Sent: Sunday, June 17, 2007 9:36 AM To: elecraft@mailman.qth.net Subject: [Elecraft] Regarding electric fence wire RF travels on and/or near the surface of a conductor. The plating on fence wire tarnishes / corrodes rapidly and therefore isn't the best choice for antenna wire. 73! Ken Kopp - K0PP [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 Manual(s) and circuit diagrams ?
I asked them about this and the response they sent me was, it will be available when the radios start shipping. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Giancarlo Moda Sent: Thursday, June 14, 2007 10:14 AM To: [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Manual(s) and circuit diagrams ? --- [EMAIL PROTECTED] wrote: Are K3 Manual(s)and circuit diagrams going to be made available in electronic format? It's taking longer than hoped but according to Wayne: Yes. Thanks for your prompt reply. I missed Wayne's note. I am sure it does take some time to produce the quality manuals as we know covers Elecraft products. I am very curious about the circuit diagrams... 73 Gian I7SWX == To: Jerry T. Dowell [EMAIL PROTECTED] Subject: [Elecraft] Re: K3 Manual From: wayne burdick [EMAIL PROTECTED] Date: Sun, 29 Apr 2007 09:28:47 -0700 Cc: elecraft@mailman.qth.net Hi Jerry, The Owner's manual is about half-finished and will be put on-line when we feel that it's ready. I'm guessing around the end of May. 73, Wayne N6KR == Need a vacation? Get great deals to amazing places on Yahoo! Travel. http://travel.yahoo.com/ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] flagrantly OT: name of WWII comedian who ...could teach Morse code to a dog....?
Was that Phil Silver Not sure if he was 40's era or not, but I used to watch him back in the 50's on TV when I was a kid. Stan Rife W5EWA wayne burdick [EMAIL PROTECTED] wrote: I heard this very funny piece on NPR a couple of years ago about a 40's-era comedian who did skits about military life. In one skit he played a radio-class instructor disgusted with a new class of underachieving recruits who were there to learn the code. He chastised them for not studying while bragging that he could teach anyone the code, even a dog, which cracked up the studio audience (or, I'm not sure which, prompted the laugh-track operator to open it up all the way). Being not quite 50, I wasn't there. I bet a few of you were :) I couldn't find his name with a web search. Anyone have a clue? tnx Wayne N6KR --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] 1st K3 on ECN!!
That is one of the beta units, I'll bet. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ken Kopp Sent: Sunday, June 10, 2007 6:36 PM To: Kevin Rock; elecraft@mailman.qth.net Subject: Re: [Elecraft] 1st K3 on ECN!! Now you've done it! All of us will be watching the driveway for the UPS or mail truck! 73! Ken Kopp - K0PP [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Dayton K3 pics
Nice pics Craig. Thanks. Stan Rife W5EWA Craig Rairdin [EMAIL PROTECTED] wrote: I've posted a couple K3 pics from yesterday at my Web site: http://www.craigr.com/coppermine/index.php?cat=28 Craig NZ0R ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] loaded K2 vs K3
Every Ham needs a wife like that. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, May 14, 2007 4:02 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] loaded K2 vs K3 My wife is mad on gardening. The only thing she notices is plants. Last weekend, I printed off the PDF K3 brochure, showed it her, and told her I had ordered this radio. A couple of days ago she came into the shack / office and noticed the K2, which happened to be on. Oh, your new radio has come, then! Er, no. That's the old one. It's been there since 1999! Julian, G4ILO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Re: filter selection
I'd like to add that, I personally, was initially confused by all of the filter selections and was totally ignorant on the subject of roofing filters. But after reading a lot of the posts and asking some questions, I think I have a handle on it enough to make an informed decision for myself on what I might need as far as these filters go. Like Wayne stated, these various selections are an end result of what different people like, and have requested in the past. So now these options are available. One person might like 200hz, and another 250hz. It may be somewhat intimidating to the un-initiated (me for sure), but this list and Elecraft have always been here to clarify and answer our questions. I hardly believe that it will intimidate anyone to the point that they will not buy a K3. And if anyone thinks that it is unecessarily complicated, that is their opinion, but in the end I doubt that it will affect your paycheck any. Stan Rife W5EWA Houston, TX K2 S/N 4216 wayne burdick [EMAIL PROTECTED] wrote: Bill Tippett wrote: My point is that you introduce unnecessary complexity with the vast number of roofing filters. 400 vs 500, 250 vs 200, etc. We're providing a range of options so the customer can decide which they want. We may add supplemental information to the order form to make decisions easier, but we're not likely to reduce the number of filters offered. As one example here are Elecraft's own specs for the 400 8-pole versus 250 8-pole: Filter 6 dB BW 60 dB BW KFL3-400K 435 Hz 935 Hz KFL3-250K 370 Hz 785 Hz The reason we offer both of these INRAD filters is that they're both, historically speaking, very popular. I agree that the frequency spacing of these filters could be clarified in their literature, but again, we offer them because our customers asked for them, and we're passing along the model numbers used by INRAD. We offer our own narrow filter (200 Hz) for those who really want to maximize rejection of unwanted signals in CW and data modes. Such narrow bandwidths have been very popular over the years, including in the K2. In my opinion these filters are redundant and unnecessarily complicate the ordering process. 65 Hz difference in 6 dB BW is hardly worth bothering with, especially since both are 8-pole and their IMD/BDR performance is likely to be identical. As I explained above, this is a somewhat anomalous historical situation. If INRAD would like to create alternative filters with different specs, we're open to offering them. It's your decision of course but I'm a believer in keep it simple. I would offer only the best filter for a given BW, predetermined by Elecraft and based upon actual IMD/BDR measurements inside the K3. Eventually we'll have such measurements. For now, we're not about to limit anyone's personal choice. We'll also provide great leeway in letting customers change their order if new information causes them to rethink their filter complement. 73, Wayne N6KR --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 styling for XV transverters
Will the power supply contain the speaker as well? Be a nice space saving feature. Stan wayne burdick [EMAIL PROTECTED] wrote: There's no present plan to do this, but it's certainly a possibility for the future. After the panadapter, power supply, external speaker 73, Wayne N6KR On May 5, 2007, at 10:27 AM, David Fleming wrote: Since the K3 can do FM, I would expect the XV transverters to be popular add-ons. I know I will be getting the XV144 and the FM filter. Are there any plans to offer the transverters with K3 styling? --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Price Comparison and Comment
Well then, I have finally got to know the skinny on this ceiling filter (er roofing) issue and I am totally confused (still). I thought I had a handle on it (order them all), but now someone says that we DON'T need them all. How do you know which ones you do need? And I have seen someone say that one (or all) of them will be tuneable. Can some (again please) lay this out in laymens terms for the ignorant, non savy (ME) of us. Stan Rife W5EWA Houston, TX K2 S/N 4216 Lee Buller [EMAIL PROTECTED] wrote: Bill, You are right. After thinking on this for more than 10 minutesI came to the same conclusion. A K3 can be had for 1800 dollars in modular kit form...with just 100 watts and no bells and whistles. The 2.7 roofing filter comes with the unit, so you would have a workable unit after building it. So, the price comparison I put out last weekend was...well...wrong! Wrong on so many levels. I did not understand roofing filters at time and considered them IF Filters. I was informed by very nice people that not all five filters would be needed. So, that was a bogus assumption on my part. Also, I looked at the price from a full blown perspective. What I like about Elecraft is that you can put in the pieces when you can afford them. Not like other companies who do not offer that kind of flexibility. So...sorry about the poor email Lee Buller Making a mistake is not a problem...not learning from mistakes is a big problem. This is assuming the problem is not life or death In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense devine? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 manual
Eric, when will the manual for the K3 be available for downloading. Stan Rife W5EWA Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED] wrote: Rounding error... ;-) 73, Eric WA6HHQ Bernard Gaffney, N8PVZ/QRP wrote: Has anyone besides me noticed that if you order the K3/10 ($1,399) and the KPA3 ($349) you'll save $1 over the price of ordering the K3/100 ($1,749), and have the same thing? Do the math. But, hey, I splurged and bought the K3/100. 72 de N8PVZ ---bernie gaffney ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] another T-shirt Slogan
BIG ELECRAFT logo, with text that says: My other radio is a YeaComWood Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gregg W6IZT Sent: Sunday, April 29, 2007 8:41 PM To: 'Elecraft Reflector' Subject: RE: [Elecraft] another T-shirt Slogan My 2c worth The ONLY radios in my shack are ELECRAFT! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of michael taylor Sent: Sunday, April 29, 2007 7:08 PM To: Elecraft Reflector Subject: Re: [Elecraft] another T-shirt Slogan My pitches: Elecraft K3 What's in your shack? (play off AmEx ads) Because Agilent doesn't make transceivers or Because Rohde Schwarz don't make amateur transceivers K3: Thank goodness, Amateur Radio is dying. I couldn't handle any more excitement. So what if it doesn't cost the price of a new car? K-3: Not necessary the divorce-maker (play off of K-19: The Widowmaker) Elecraft K3 World domination never looked so easy (and my favourite:) Elecraft K3 - Who built your radio? -Michael, VE3TIX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] T-Shirt Idea
Kenwood TS-2000, 2499.00 Icom 756Pro III, 3000.00 Yaesu FT-20003500.00 Elecraft K3, Priceless Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Rock Sent: Sunday, April 29, 2007 9:34 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] T-Shirt Idea Elecraft K3 Why settle for anything less? Kevin. KD5ONS -Original Message- From: Toby Deinhardt [EMAIL PROTECTED] Sent: Apr 29, 2007 9:39 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] T-Shirt Idea Blessed be the K3, for it lets the light in He who will not K3 will have to agonize Study the K3 if you would define the future A word to the K3 ain't necessary - it's the stupid ones that need the advice This is the K3 my friend, the very end A man's only as old as the K3 he feels K3 is the last refuge of the imaginative To forget one's K3 is the commonest form of stupidity Elecraft is called the religion of K3 A man's character may be learned from the Radio which he habitually uses in conversation : K3 Old boys have their playthings as well as young ones; the difference is K3 Diplomacy without arms is like radio without K3s From K2 to K3 one discovers the entire truth vy 73 de toby -- Electricity is really just organized lightning. George Carlin ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Microphones for the K3
Wayne, are we going to be able to use the existing microphones for the K3? I have the mobile mic for the K2, as well as the desk mic and the Heil headset all wired for Kenwood. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill W5WVO Sent: Monday, April 30, 2007 12:05 AM To: wayne burdick Cc: elecraft@mailman.qth.net Subject: [Elecraft] Re: K3 S meter Hmmm... I just went back through my reflector mail as well as the published Omni-VII literature, and I can't find anywhere it says 6 dB per S-unit. I could have swore that I read that. Could be I assumed it, though... That used to be one of the standards in days gone by... LONG gone by... Just did the math based on S9 = 50 uV, and if you figure 1 uV for S0, you get 3.775 dB per S-unit, pretty much what you said. If you use 6 dB per S-unit, a 0.25 uV signal (nominal minimum detectable) would be between an S1 and an S2. Is this right? On the face of it, it doesn't seem so -- but if you go by the old-time verbal strength descriptions for the S scale, an S1 is a barely perceptible signal. Neglecting any atmospheric noise floor for the moment, a barely perceptible signal in a modern HF receiver would be about 0.25 uV, so by these lights, maybe the 6 dB per S-unit isn't so far off. Maybe 5 dB makes the most sense, since this places the minimal detectable signal near S0, and anything above that would move the S-meter (including the atmospheric noise floor). I think that would be my vote. Bill / W5WVO wayne burdick wrote: I think 3.5 to 4 dB per S-unit is closer to operator expectations, Bill, but I'm sure TT has their reasons. We do agree on 50 uV = S9. Whether the S-meter compensates for the preamp and attenuator is an interesting subject; we might provide a menu entry to turn this on/off. 73, Wayne N6KR On Apr 29, 2007, at 5:15 PM, Bill W5WVO wrote: Wayne, Just as a data point, in case you don't know -- the Omni-VII features a calibrated S-meter (50 uV = S9, 1 S-unit = 6 dB) on all bands, and it always reads the same for a given signal level regardless of the state of pre-amps or attenuators switched in/out. --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 Firmware Backups?
That would be a great feature. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bernard Gaffney, N8PVZ/QRP Sent: Monday, April 30, 2007 10:30 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Firmware Backups? Is there, or are there any plans to add, a firmware backup utility for the K3? It would be real nice to be able to back up all the firmware settings to a file on your harddrive/cd/etc, in case something goes blip with your K3 firmware settings. Then a very simple restore process, rather than having to master reset and manually redo all the settings. Yet another suggestion for the ever growing WishList. BTW, let me be the first to ask: When can we expect the K4's release? Har Har! 72 de N8PVZ ---bernie gaffney Yabba Dabba Doo! ---Fred Flinstone __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 KPA-800
K3 = 3500.00 loaded, KPA-800 = 3500 (approx) Better start saving now! Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of wayne burdick Sent: Monday, April 30, 2007 11:34 AM To: Tom Zeltwanger Cc: elecraft@mailman.qth.net Subject: [Elecraft] Re: K2 backward compatability Tom, The KPA800/1500 amplifiers will work with any rig, including the K2 and K3. These have been delayed because of the K3 release, but we'll keep everyone informed of progress. We plan an external speaker/power supply unit for the K3 someday, as well as a panadapter, and these would all work with the K2. The K2 may benefit from some of the K3's hardware and firmware, someday, but I can't predict when/if. 73, Wayne N6KR On Apr 30, 2007, at 8:06 AM, Tom Zeltwanger wrote: The new K3 sounds great but for now I will be completing my K2 station. So I am looking for continued upgrades and options for the K2, as well as eventual upgrade path to a K3 in a year or two. Will there be any K3 options that might become useful with a K2 station? My main interest here is in outboard amplifiers for digital modes (sound like K3 100 watt unit may have better cooling, allowing higher power levels in high duty-cycle modes). Also, will the big linear amps that are planned work with either K2 or K3? 73, Tom KG3V --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Signal Generator
Check at Fair Radio. I bought a surplus military signal generator for less than 200 bucks (160 or 180). The one I purchased is a URM-25D. It does AM and CW modulation (no FM). They said it worked...and it did, but the output was kind of flaky. I sent it off to a place in Washington state that refurbished the unit and made it work like new for 60 bucks. They did a bunch of circuit mods and replaced a lot of components that had deteriorated with age. The shipping ate me up though, as the unit weighs around 50 pounds packaged for shipment. It should last me a LONG time. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Geoffrey Mackenzie-Kennedy Sent: Wednesday, April 25, 2007 1:26 PM To: Al Dianne Bruce Cc: Elecraft Discussion List Subject: Re: [Elecraft] Signal Generator Al, I cannot comment offhand about any low cost commercial signal signal generator that would suit your requirements, but if you are prepared to homebrew there are many low cost options. If you did homebrew and if you needed to know the output level from the generator when using it, you would need to measure RF voltage with good accuracy when calibrating the generator feeding a 50 ohm load. Also I would suggest in this case that you purchase rather than build a step attenuator capable of introducing at least 60db of attenuation. It is possible to build a good step attenuator, but you would require good test equipment to check its performance, also its enclosure and its internal shielding partitions have to be built in addition to the 'electronics'. On the other hand if you only require a generator which can produce a stable but tuneable unmodulated carrier in the 40 - 15m bands, and you are not interested in the actual value of its output level (which could be adjusted during use), a homebrewed generator can be very simple. Other than a receiver with frequency readout test equipment is not essential, although having a DMM is a good idea. Please contact me off-list if you would like to discuss this further. 73, Geoff GM4ESD - Original Message - From: Al Dianne Bruce [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Wednesday, April 25, 2007 6:24 AM Subject: [Elecraft] Signal Generator Good morning folks ! I am looking for a signal generator that outputs signals across the frequencies of the 15-40 band, and does not cost an arm and a leg. Need your advice, does such a creature exist? Al ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] HAKKO Huzzahs
The 808 is a life saver on those multi-legged critters. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, March 10, 2007 9:06 PM To: elecraft@mailman.qth.net Subject: [Elecraft] HAKKO Huzzahs Oops. Tom Hammond N0SS that is, for the good advise. Sorry Tom ;0). Bob Hi everybody. Just sitting here revamping a few K2 enhancements from the past and the thought leaps to mind, thanks for the advise Tom! HAAKO is GOOD! I couldn't do without my trusty 936 and 808. Best Regards, Bob K7HBG PS. Sure wish I had a sales franchise! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] New Elecraft Amp(s) - with bare K2?
What new amplifiers??? You mean that empty box that Elecraft has been toting around the hamfests for the last year? I don't think there is really an amplifier in there. I think they have just been shining us on. If there were REALLY a KPA-800 1500, we would be using them right now. :-) Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Fred (FL) Sent: Tuesday, February 27, 2007 4:41 PM To: elecraft@mailman.qth.net Subject: [Elecraft] New Elecraft Amp(s) - with bare K2? Will the soon-to-be-sold new Amplifier(s) coming out by Elecraft - be able to be fully driven by a bare bones basic K2? As always a fan of separate units; xcvr, amp, tuner, swr/power metering. I'm trying to end up with a CW/SSB decent wattage K2. I can't get myself to go the top-cover amplifier KPA100 route. IMHO - not the way to go for me. I guess what I'm driving at (!) - is what is the min. drive power required of these new amplifiers? Fred, N3CSY Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K2 receive sensitivity
Paul, Check out Jack Smith's website for a fairly simple method of determining the sensitivity of your K2. There are some readings that Jack took of his K2, and also readings that I took on my K2. I've provided a link to the page so you should be able to go right to it. http://www.cliftonlaboratories.com/k2_rx_sensitivity.htm You can also check out the rest of his website while you are there. He has some interesting information on the K2, as well as a nice Panadapter that you might want to take a look at. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Wilhelm Sent: Tuesday, January 16, 2007 10:07 AM To: Paul Del Negro; elecraft@mailman.qth.net Subject: RE: [Elecraft] K2 receive sensitivity Paul, I do not have 10 meter specific MDS measurements handy. I can measure 2 K2s sometime in th efuture if it is necessary, but it will be after I get the workbench cleared. If you have the equipment, measure the RX VFO injection level to the mixer (TP1) - it should be +7 dBm for good mixer performance. Assuming the mixer presents a 50 ohm load to the VFO signal and your measurement does not interfere with the loading, you should see a 500 mVrms voltage at the mixer port or 1.416 volts peak to peak on a 'scope. In-situ measurement is not the best for this, substitution would be better, but you can draw some conclusions based on the in-situ measurement if the input impedance to the measuring device is high enough (you will be measuring in the 23 to 24 MHz range, so be certain the instrument is capable of accurate readings at that frequency (a 150 MHz 'scope with 150 MHz 10X probe should give good measurements). If the 10 meter VFO input is sufficient, you should be getting full benefit from the mixer, and there is nothing short of reducing the losses in the bandpass filters, T-R switch, and Low Pass Filter that will improve the MDS on 10 meters. If you find the mixer input level low, it can be adjusted by changing the resistors on the U2 buffer, but check all bands so you don't overdrive the mixer if you change the level. If the VFO level changes between bands, look for some frequency dependency in the VFO ALC circuit. My reasoning: - beyond the mixer, the K2 response should be the same from band to band, the only thing that will make changes on one band and not others is between the antenna jack and the mixer. 73, Don W3FPR -Original Message- I do own the XG2 and have performed MDS measurements on my K2 using the XG2 and also a milspec signal generator I have. The numbers agree very closely with published specs ON 20 METERS. On ten meters I measured an MDS of -124 dbm (preamp off) and -130dbm (preamp on). IMHO, an MDS less than -130 dbm is not acceptable for weak signal reception. Which means to me that on 10 meters the preamp is absolutely required. snip... I just want to know if my K2 is healthy or not. I think the K2 is a masterpiece of 'elegant simplicity' and my intent is not to knock the rig. I've had more fun since the my kit arrived than I've had since the heathkit days. 73, Paul, N2PD -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.16.12/628 - Release Date: 1/15/2007 11:04 AM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K2/100 with SB200 (was K2/100 with LK-500Z)
Or you could just order the softkey module from Harbach Electronics for the SB-200. It's pretty easy to install, and you would be able to key the SB-200 with any rig. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Schmidt Sent: Wednesday, January 03, 2007 2:21 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K2/100 with SB200 (was K2/100 with LK-500Z) Tom Hammond [EMAIL PROTECTED] wrote: Ron: Is there any reason to use a keying interface between these two? The K2 manual says the PA key circuit handles 1 amp at 200v DC. The LK manual doens't say what the exact specs are, but from the schematic it looks like the LK uses 12V for the TX relay. I'm an appliance operator so sure would appreciate advice before I key the amp direct from the rig. Nope, none whatsoever... the MOSFET at the T-R output of the KPA100 is more than adequate to key just about any T-R line which offers a POSITIVE DC voltage less than about 200VDC and 5A... UNfortunately, it will NOT (directly) key some of the older amp T-R lines which offered negative voltages. 73, Tom Hammond N0SS For negative voltage keying I found that using the the circuit by K4IQJ from May 1989 QST, http://www.arrl.org/members-only/tis/info/pdf/sstrans.pdf worked well between a Heathkit SB200 and the K2. I built it on a Sunday and the only high voltage P-channel enhancement mode MOSFET available at the local Fry's electronics was an NTE2381 which is overkill. I deleted the zener diode that K4IQJ included to protect the transceiver since the diode protector in the MOSFET of the K2 is rated to handle the full fault current from the SB200 (You should verify this yourself before doing what I did. That is, I believe, [but haven't tried it!] that you can stupidly connect the SB200 to the K2 directly and the K2 will survive.) The circuit is simple; I built it into a small plastic box that sits behind the SB200. The K2 keys (to ground) a 1K ohm resistor connected to the positive terminal of a 9 volt battery whose negative terminal connects to the gate of the FET. A 470K ohm resistor connects from the gate to ground. The source is grounded, and the drain and ground connect to the SB200. K4IQJ included a 15 volt 1 watt zener from the gate to ground, to clamp the voltage on his rig if the MOSFET failed, and suggested using an IRF9610, IRF9612, IRF9620, IRF9630 or IRF9632 for the MOSFET. 73 Kevin w9cf =- Kevin Schmidt, [EMAIL PROTECTED], http://fermi.la.asu.edu/w9cf Department of Physics Arizona State University, Tempe, AZ 85287-1504 (480) 965-8240 Fax: (480) 965-7954 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] USB to Serial
I have two of those, Tom, and they work well. I am not using one with the K2 however, so I can't comment on that. The two I have in use showed up as Com7 Com8. My driver disk says it is for the USA-19H family of adapters. The Windows XP driver is V3.4. If you need it let me know. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Thom LaCosta Sent: Friday, December 29, 2006 4:00 PM To: QRP-L List Cc: elecraft@mailman.qth.net Subject: [Elecraft] USB to Serial Does anyone have any experience with the Keyspan USA-19 single port USB to Serial converter? I was given one that was in use on a MAC systemdownloaded the WindowsXP driver from the manufacturer's sitethe diagnostics says it works, but I can not get CWCOM to see it as what it advertises(COM4). Thanks in advance. Thom www.baltimorehon.com/Home of the Baltimore Lexicon www.tlchost.net/hosting/ Web Hosting as low as 3.49/month ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K2 frequency drift
I don't really see, or notice, any drift in my K2. I'm sure it does a bit, but it must be a small amount, and negligible for my purposes Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Wilhelm Sent: Sunday, December 24, 2006 2:26 PM To: Kevin Schmidt; elecraft@mailman.qth.net Subject: RE: [Elecraft] K2 frequency drift Kevin, The RA resistor on the thermistor board is intended to compensate for drift AFTER warmup - such as drift that might occur due to the additional heating when the KPA100 is transmitting. I do not believe it would be fruitful to attempt to compensate for the initial warmup drift that one may find in the K2 - and you may wind up overcompensating and find the drift after a warmup period would be greater - it would not be good to have a K2 that does not drift when first turned on and then begins to drift after some warmup period. Or perhaps better said, the thermistor board provides compensation for the PLL reference oscillator. There are many more components involved in the initial warmup drift - the BFO is one. It would be interesting to try, but would take a lot of controlled test conditions to verify the results. 73, Don W3FPR -Original Message- The K2 PLL Ref Upgrade manual gives some information on typical drift i.e. 5 to 20 Hz per 15 degrees F on 20 meters. It also explains how changing RA on the thermistor board can better compensate for the drift. Since your drift is consistent, I think you should be able to reduce it by adjusting RA on the thermistor board. 73 Kevin w9cf -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.15.26/601 - Release Date: 12/24/2006 11:31 AM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] on CW
And I think Elecraft will continue to be well supported as well. Stan W5EWA wayne burdick [EMAIL PROTECTED] wrote: The test may be eliminated, but all the reasons that CW is popular will still be there. Perhaps this is why CW continues to flourish even in countries that phased out their own testing requirements in past years. It's fun for many of us, of course. But it's also characterized by generally simpler equipment, and offers a higher signal-to-noise ratio than voice modes for a given power level or amount of signal processing. This is why it's appropriate for gear that we carry on backpacking trips and for emergency use, and of course for QRP gear in general. CW has a standardized shorthand (including Q signals and common abbreviations) that transcend language barriers. And it's a digital communications mode, yet it doesn't require a computer or specialized interfaces. There's an immediacy to CW communications that makes it feel quite personal -- just as if you're talking, which of course you are. Then there's my personal favorite: When I'm out camping in some remote location, late at night, I can put on my headphones and make two-way contacts with faraway places -- without disturbing anyone sleeping close by. (There's something about surfing the ionosphere, with all its propagation modes, odd noises, and unexpected surprises, that you just can't duplicate using the internet.) Elecraft will continue to strongly support both CW equipment and CW operation. 73, Wayne, N6KR --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K2 problems
What were your results when completeing each stage of the build? Were the alignment requirements met at each one of those stages? If they were, then you should at least have a good receive on each band. I don't know what would have changed so drastically that you now have no receive at all...not to mention the transmitter. I would probably start at the beginning and do each stage of the realignment again, and if you come to an alignment step that does not meet expectations, start your trouble shooting at that point. Stan Rife W5EWA Houston, TX -Original Message- Well I have K2 #5846 with all components in the enclosure, but it's not doing what I hoped for. Have been trying to align it and this is what I am getting. 80 meters no receive or output. 40 meters 20 watts out and no receive. 30 meters 10 watts out and very weak receive. 20 meters 1 watt out and no receive. 17 meters no output and no receive. 15 meters no output or receive. 12 meters no output or receive. 10 meters no output or receive. The output measured with a heathkit meter, which is very close to being accurate, but not calabrated. On the first power up before begining alignment I had a very weak recieive on 15 meters. The signal source for tuning it is another transceiver with output set to 5 watts. At one time I had a good receive signal on 40 meters but lost it in tuning the other frequencies. I think the problem is in the receiver, but don't know where to start looking. Have checked for cold solder joints several times. Anyone have any ideas? Thanks Scott N5SM -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.15.15/581 - Release Date: 12/9/2006 3:41 PM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Noise source on 30 20 meters
Thanks to Leigh's (WA5ZNU) suggestions, I found the source of my noise right here in my own shack. It was a noisy (switching) wall wart power supply for my D-Link 7 port USB hub. Jeff (WB5GWB) said he was also having some major noise at his QTH, and he found that his DSL router was causing some serious EMI for him. He was also unable to operate because of the noise. Thanks for all the help from those who responded. I appreciate it greatly. Jeff and I discussed how we procrastinated getting around to actually searching for the problem because of how difficult we thought the task was going to be. The thought of walking around the neighborhood for hours on end with an EMI sniffer, and having to call the power company to come out and investigate, or maybe have to deal with a not so friendly neighbor...it just seemed like too much trouble. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 30 meter S-meter reading
I recalibrated my S-meter and now the constant 2 bar reading on 30m is not present any longer. This is probably the 3rd or 4th time that I have had to recalibrate the S-meter in the 2 1/2 years since I built my K2. Has anyone else had to recalibrate their S-meter occasionally? Is something (AGC voltage) changing in the circuitry to cause this, and is it something I need to be concerned about? Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 30 meter gain
My K2 seems to have way too much gain with the preamp on for 30 meters, OR I have a bad EMI problem here. The noise level stays at 10 to 20 over S9 with it on, and it is not useable with the noise floor that high. With the preamp off, the S-meter seems to sit around S3. Is this normal for 30 meters on the K2? I seem to remember the manual stating that the preamp was not needed on the lower bands. I thought 30 meters was considered one of the high bands (with 20m) and so I had left the preamp on for 30. I have really been plagued with a lot of noise here in the past several months, and I am trying to figure out if I have an EMI problem here locally. My noise level has been very high most of the time lately on 20 meters. Only occasionally is it low enough that I can use that band. I am thinking that the problem is present on 30 meters as well, but just can't remember what the preamp setting is for that band. I seem to remember that the preamp was on all the time for 30 meters, but I am just not sure now. At this hour there are no sigs on 30m to tell what my receiver is doing with the preamp off. My antenna is a Butternut HF9V vertical that I have had for a couple of years. This evening I strung up a 20 meter dipole just to see if it would make any difference. I see a little improvement on 20 meters, but the noise is still S7 to S9 and 30m is just as noisy as ever with the preamp on. Also, do any of you notice these noise waves that float across the bands? I don't know what the official name for them are (if there is one), and that is the only thing I could come up with. They appear to be about 6 to 8khz wide. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com