Dear Gary,
Are you implying that UL has previously accepted the FDA letter of
accession rather than the complete FDA Report submitted by the
laser manufacturer?
Best Regards, Peter
From: Gary McInturff gmcintu...@packetengines.com
To: 'pe...@itl.co.il'
Rich,
UL does not accept HAR cordage in the USA because the HAR
cordage does not meet the UL/ANSI standards for cordage.
Likewise UL/ANSI cordage does not meet HAR requirements.
Cordage that is Harmonized and UL/CSA-listed is rare but not impossible to find.
Feller offers these Universal
Just to fan the fire here. With the grousing around in Quebec whether
English or French should be used. There were some fines for shop owners who
used English only, and if they used both the French had to be larger than
the English.
Ah well!
Gary
-Original Message-
From:
Bonjour de Montreal,
Try also this one (free access)...
http://www.mcw.edu/gcrc/cop/powerlines-cancer-FAQ/toc.html
Regards,
At 15:43 22-03-99 -0500, john_loise...@ne.3com.com wrote:
Hello Group,
A friend of mine called and asked if I knew anything about the interaction
of his building's
The Rocky Mountain Chapter of the EMC Society will be
hosting a Mr. Mark Montrose who will present a 3.5 hr
training class on PCB Design Techniques for SI EMC.
He will also present research data (unpublished and undiscovered)
on the performance of decoupling capacitors at this meeting.
For more
Standards: If you would like to purchase a standards volume or a set of SEMI
Standards, please call SEMI Membership Services at 1.650.940.6904.
Or, if you prefer, you may become an OnLine member, and download the
standards (for a fee of course! typically $50 each). If you're interested in
this
Greetings EMC Professionals!
The Orange County Chapter of the IEEE EMC Society has invited Charlie M.
Bayhi to speak at our April meeting! We are very pleased that Charlie is
available to share his presentation, titled Designing for Safety for the
Year 2000 and Beyond with out group, and
Benoit is entirely correct, however a word to the wise for Canadian
political correctness. There are some in Canada, who take great offence when
somebody leaves off the official language of their choice from any
literature. Since most of us cannot say for certain what official Canadian
language
Could someone please explain what the deviations to EN61010 are taken when
getting CSA approval(C22.2 1010)? I am under the impression that there are a
few additional or more stringent requirements that need to be done above and
beyond the CE requirements of EN 61010.
any help would be
To All,
Thanks to all that responded. I have forwarded the url listed below along
to the person that was interested. This seems to be the most popular
response.
Thanks again -John
Jim Bacher j...@gwmail.monarch.com on 03/23/99 12:56:13 PM
To: emc-p...@majordomo.ieee.org, John
Hi Ray:
I know that at one time, UL had accepted a HAR type cordset. Now, I have
...
...
Does anyone know why UL stepped back away from accepting EU cords?
My guess is:
UL accepts HAR cordage (not cordsets) for products going
to countries where the HAR certification is accepted.
UL
Try this url: http://infoventures.com/
Jim
john_loise...@ne.3com.com 03/22 3:43 PM
Hello Group,
A friend of mine called and asked if I knew anything about the interaction
of his building's main power transformer and interference seen on his pc
monitor. He sits adjacent to the transformer
For those who live and/or work in the area of Santa Clara, California,
this is a reminder regarding tonight's PSTC meeting. If you wish to
receive direct e-mail notification of these meetings but are not
currently on our mailing list, please e-mail Julia Luke the following
address:
Does anyone have a manual for the HP-85650A Quasipeak Adapter for sale? Please
reply directly to me. Thanks.
Ed
--
Ed Price
ed.pr...@cubic.com
Electromagnetic Compatibility Lab
Cubic Defense Systems
San Diego, CA. USA
619-505-2780
List-Post: emc-pstc@listserv.ieee.org
To whom it may concern,
I have reviewed the EMC Directive and the Guidelines to the EMC
Directive yet I am somewhat confused on the applicability of new and
superseded standards.I am trying to decide which version of the
generic immunity standard (EN 50082-1) to apply to our products, the
Mark A. D'Agostino
US National BU Manager -
Machinery, Consumer Products, Mechanical Safety
978 739 7016
md'agost...@tuvps.com
http://www.tuvglobal.com
-
Original Text
From: Mark D'Agostino, on 3/23/99 11:22 AM:
To: Internet Gateway@Services@PSNBL[Richard Cass
Greetings,
I know that at one time, UL had accepted a HAR type cordset. Now, I have
been told by some line cord vendors that UL does not approve any HAR type
cord any longer. Belden has a jumper cord with C13 and C14 connectors that
has both US and EU approvals, but no other configurations are
UL takes it upon themselves to verify that the laser product they are
certifying complies with the applicable FDA requirements. This can be
anything from a simple check of the CDRH report to a complete evaluation and
measurements of the laser. I believe at least some of their offices have
the
Bonjour,
ICES-003 requires a special statement for the Canadian market but this
statement could be in english only or in french only or both.
Regards,
At 08:28 23-03-99 -0500, WOODS, RICHARD wrote:
For digital devices, the emissions limits are the same for Canada as they
are for the USA.
I know its slightly off subject but could someone the easiest way to order
(or obtain for free) a copy of:
SEMI Standard E10-96, Guideline for Definition and Measurement of Equipment
Reliability, Availability, and Maintainability (RAM)
Richard Cass
Iris Graphics
Bedford, MA 01730
-
This
John,
Before he calls out the health squad, your friend might also check to see
if a filter in the CRT power supply is failing. It's probably the most
likely cause of the distortion and would be most noticable if the CRT is
set at a 60Hz refresh rate.
Just move the monitor to a different
Compliance with EN61000-3-2, Limits for harmonic current emissions
(equipment input current = 16 A per phase) and EN61000-3-3, Limitation of
voltage fluctuations and flicker in low-voltage supply systems for equipment
with rated current = 16A are required for electrical and electronic
equipment
Hello Moshe,
UL1581 is the UL standard that covers test methods for many of the most common
wire and cable
tests performed on a variety of Listed and Recognized wire and cable types.
The standard includes test methods for many tests, including: Physical
Properties tests on
various insulation and
In the past I have had my problems with UL and lasers.
The FDA does not measure laser energy. The CDRH (part of the FDA) collects
reports of laser products from manufacturers. These reports are 25 pages
long and filled with technical information about the product. There are
usually a significant
For digital devices, the emissions limits are the same for Canada as they
are for the USA. Industry Canada is the controlling agency and the
specification for digital devices is ICES-003 Issue 2, Revision 1. I believe
that you can find the document on line. A special statement is required on
the
Roger
All of the details are available at http:\\strategis.ic.gc.ca This site
includes all of the requirements.
Basically satisfying either the FCC or CISPR requirements and applying a
Canadian label, are the requirements.
John Mowbray
-Original Message-
From: roger...@astec-asia.com
IEEE Standard 519-1992, IEEE Recommended Practices and Requirements for
Harmonic Control in Electrical Power Systems, provides procedures for
controlling harmonics on the power system along with recommended limits
for customer harmonic injection and overall power system harmonic
levels.
Does
Can anyone give me some guidance on the requirements for machine safety in
India, please?
Nick.
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with the single line: unsubscribe emc-pstc (without the
quotes). For
Have the vendor send the letter of ascension or whatever the FDA calls it
directly to UL. If the vendor doesn't have it yet, be prepared for a lengthy
delay. The FDA isn't too quick about these things for resource reasons, I
suppose. UL has to have that information because they do not have the
TIA 41.7 and Underwriters Laboratories are interested in obtaining
information and input relating to concerns, complaints and problems with the
cutover from UL 1459 to UL 1950 3rd Edition for equipment designed to be
owned, installed and maintained by a telecommunications provider. This is
Peter,
I cannot tell you whether all UL/CSA Listed/Recognized/Certified circuit
breakers have a minimum 3 mm contact gap, but I always specify that this is
what I need when using breakers as a disconnect device.
Tania Grant, Lucent Technologies, Octel Messaging Division
Hi John:
He sees the video distorted and was wondering
about any health risks.
The first thing you should do is ascertain that the
distortion is caused by an external source or an
internal (to the monitor) source. It is possible
that the degauss circuit has failed, in which case
Can anybody advise the EMC requirements for power supply units (desk
top and stand alone adaptors) shipping to Canada. Is there any logo
required? Should the tests be done in the accredited test lab, if so,
is HOKLAS accredited lab accepted?
Thanks and regards,
33 matches
Mail list logo
