Andy - further on spindles, as per Sam's suggestion I tried
net spindle-position encoder.0.position-interpolated =
motion.spindle-revs
rather than
net spindle-position encoder.0.position = motion.spindle-revs
At low speeds with low encoder counts it sounded totally different -
On Thu, 2 Aug 2012 06:18:43 +, you wrote:
position-interpolated is not for position control - says so right in the docs.
not that it says what it IS for and I forget...
G
It's on the spindle encoder.
I couldn't find it in the docs?
Steve Blackmore
--
On 2 August 2012 09:20, Lester Caine les...@lsces.co.uk wrote:
I'm just looking at a 16Gb
Solid State Drive at £26 but I'm still not sure on the 'life' of that? Will it
get warn out or can we disable all of the log writing.
I have (accidentally) been using a cheap 8GB flash SATA DOM on my
On Linux an SSD will last for a very long time. If you are paranoid you
can use the suggestions on the LinuxCNC wiki for compact flash cards but
it probably isn't necessary.
I would't run an SSD on Win7 or Win8. They thrash the drive nearly all
the time and will wear out an SSD surprisingly
On Thursday 02 August 2012 08:28:46 Viesturs Lācis did opine:
2012/8/1 Greg Bernard yankeelena2...@yahoo.com:
I've been considering one of the flexible keyboards when my current
one gives up the ghost. They're not great for general typing but
seem like they'd work fine for a machine
Les Newell wrote:
On Linux an SSD will last for a very long time. If you are paranoid you
can use the suggestions on the LinuxCNC wiki for compact flash cards but
it probably isn't necessary.
I would't run an SSD on Win7 or Win8. They thrash the drive nearly all
the time and will wear out an
Steve - Could we see your whole hal file? I am wondering maybe the
functions are not in correct the order.
they should be setup so that in nists words - the machine 'sense model
act' (but linuxcnc being flexable - you can put the functions in any order)
sam
On 8/2/2012 4:45 AM, andy pugh
On Thu, Aug 2, 2012, at 08:55 AM, Gene Heskett wrote:
On Thursday 02 August 2012 08:28:46 Viesturs Lācis did opine:
2012/8/1 Greg Bernard yankeelena2...@yahoo.com:
I've been considering one of the flexible keyboards when my current
one gives up the ghost. They're not great for
I've had bad experiance and good. (I'm sorry Les but I'm going to
contradict you [absolutely no offense intended])
I just have had experiance in diametric opposite to what your
suggesting. We used to run a machine [centroid, which operates on a
linx box] that used an SSD and we replaced
We have something similar on the KT. You do need to get used to the
'feel' of the keys. It reminds me of typing on a mechanical
typewriter. (strait down with some force) It is working well and it
get a bit of swarf on it from time to time.
sam
On 8/2/2012 9:01 AM, John Kasunich wrote:
Hi Jarrett,
I've had bad experiance and good. (I'm sorry Les but I'm going to
contradict you [absolutely no offense intended])
It is good to hear a differnt point of view ;-)
One thing that I feel makes a big difference when it comes to SSD's
is the quality of the drives. I only use
I have a couple production machines installed running Mach3/Windows with
CF cards as the drives - there are some ways to grab part of the the
Windows XP embedded files and use them with Windows XP so you can
minimize writebacks to the drives. These computers are going on 3 years
running 24x7.
On 8/2/2012 8:55 AM, Lester Caine wrote:
Les Newell wrote:
On Linux an SSD will last for a very long time. If you are paranoid you
can use the suggestions on the LinuxCNC wiki for compact flash cards but
it probably isn't necessary.
I would't run an SSD on Win7 or Win8. They thrash the
Lester Caine wrote:
PV530A-ITX from ASRock with the Via PV530 1.8Ghz processor. ONLY a VGA
graphics
port (no HDMI/TV stuff), parallel and serial, PS/2 mouse and keyboard ... and
only £39 ... add £10 for a 2Mb memory stick, and I'm just looking at a 16Gb
Solid State Drive at £26 but I'm
On 2 August 2012 15:01, John Kasunich jmkasun...@fastmail.fm wrote:
Mini, 13.7 wide
http://www.adesso.com/en/home/keyboards/flexible/177-akb-210.html
I have one of these, I am not sure how it will work when the machine
is properly set up but it is proving handy at the moment.
On Thu, 02 Aug 2012 08:12:48 -0500, you wrote:
Steve - Could we see your whole hal file? I am wondering maybe the
functions are not in correct the order.
they should be setup so that in nists words - the machine 'sense model
act' (but linuxcnc being flexable - you can put the functions in
On Thu, 2 Aug 2012 18:01:13 +0100, you wrote:
On 2 August 2012 15:01, John Kasunich jmkasun...@fastmail.fm wrote:
Mini, 13.7 wide
http://www.adesso.com/en/home/keyboards/flexible/177-akb-210.html
I have one of these, I am not sure how it will work when the machine
is properly set up but it is
unless others have an opinion...
addf parport.0.read base-thread
addf encoder.update-counters base-thread
addf stepgen.make-pulses base-thread
addf pwmgen.make-pulses base-thread
addf parport.0.write base-thread
addf parport.0.reset base-thread
addf stepgen.capture-position servo-thread
addf
I was looking up something and came across a thread from a gent in
Australia who was wondering if he could buy .9 degree steppers for his
RepRap and get them to work, and one guy commented on stepper torque
with a half truth for the situation. Apparently the norm for RepRap is
200 steps
On Thu, 2 Aug 2012, cogoman wrote:
Date: Thu, 02 Aug 2012 23:57:14 -0400
From: cogoman cogo...@optimum.net
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] .9 degree vs.
20 matches
Mail list logo
