please note the corrected URI for the unified build document:
http://static.mah.priv.at/public/html/common/UnifiedBuild.html
I just added some touchups, no need to re-read the whole document
-m
--
Rapidly
On 28 Dec 2013, at 23:24, Michael Haberler mai...@mah.priv.at wrote:
Am 28.12.2013 um 22:32 schrieb Bas de Bruijn bdebru...@luminize.nl:
On 28 Dec 2013, at 21:37, Michael Haberler mai...@mah.priv.at wrote:
Am 28.12.2013 um 21:21 schrieb Bas de Bruijn bdebru...@luminize.nl:
Am 29.12.2013 um 14:57 schrieb Bas de Bruijn bdebru...@luminize.nl:
.. good so far ..
make
sudo make setuid
. ../scripts/rip-environment
linuxcnc
linuxcnc will start,
no it does not, see line of the log:BeBoPr-Bridge.hal:26:
/home/linuxcnc/linuxcnc/libexec/rtapi_app_xenomai exited
On 29 Dec 2013, at 15:11, Michael Haberler mai...@mah.priv.at wrote:
Am 29.12.2013 um 14:57 schrieb Bas de Bruijn bdebru...@luminize.nl:
.. good so far ..
make
sudo make setuid
. ../scripts/rip-environment
linuxcnc
linuxcnc will start,
no it does not, see line of the log:
Am 29.12.2013 um 15:38 schrieb Bas de Bruijn bdebru...@luminize.nl:
/var/log/linuxcnc.log doesn’t seem to exist (at least at that location)
please look again. It should be there starting from Charles's image:
it’s not there, noticed also in /tmp/log
I have no idea what base image you
On 29 dec. 2013, at 16:08, Michael Haberler mai...@mah.priv.at wrote:
Am 29.12.2013 um 15:38 schrieb Bas de Bruijn bdebru...@luminize.nl:
/var/log/linuxcnc.log doesn’t seem to exist (at least at that location)
please look again. It should be there starting from Charles's image:
Am 29.12.2013 um 16:29 schrieb Bas de Bruijn bdebru...@luminize.nl:
so here is the contents of $ DEBUG=5 linuxcnc console output.txt 21
Please read section 3.1 of
http://static.mah.priv.at/public/html/common/UnifiedBuild.html, then run
$ sudo make log
as outlined there. Also,
On 29 Dec 2013, at 16:56, Michael Haberler mai...@mah.priv.at wrote:
Am 29.12.2013 um 16:29 schrieb Bas de Bruijn bdebru...@luminize.nl:
so here is the contents of $ DEBUG=5 linuxcnc console output.txt 21
Please read section 3.1 of
Am 29.12.2013 um 17:20 schrieb Bas de Bruijn bdebru...@luminize.nl:
Please do this:
$ export DEBUG=5
$ realtime start
$ realtime stop
Please pastebin the contents of /var/log/linuxcnc.log
http://pastebin.com/Mqb0suKM of 3 lines above
looks ok
http://pastebin.com/PvAiKAnU of $
On 29 Dec 2013, at 18:07, Michael Haberler mai...@mah.priv.at wrote:
Am 29.12.2013 um 17:20 schrieb Bas de Bruijn bdebru...@luminize.nl:
Please do this:
$ export DEBUG=5
$ realtime start
$ realtime stop
Please pastebin the contents of /var/log/linuxcnc.log
On Sun, 29 Dec 2013, Josiah Morgan wrote:
Date: Sun, 29 Dec 2013 11:07:53 -0600
From: Josiah Morgan josiahmor...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
Am 29.12.2013 um 18:25 schrieb Bas de Bruijn bdebru...@luminize.nl:
so please try the delta config
I have found it in sim/axis/rdelta.ini
I get a TK screen with a rotary delta. But this is a simulation if I’m not
mistaken.
Well hey, this is a result, we didnt have that earlier today. And
On 12/29/2013 11:25 AM, Bas de Bruijn wrote:
On 29 Dec 2013, at 18:07, Michael Haberler mai...@mah.priv.at wrote:
I run the configuration from the configuration selector
My Configurations
—ARM
——BeagleBone
———BeBoPr-Bridge
BeBoPr-Bridge
NB: the only stock configuration I know of
I try to give few commands MDI,
error:
'maximum number of queued MDI commands exceeded'
how to fix it?
--
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture
Hello
Thanks to everyones help, I have managed to get my cnc machine working
in jogging mode, but I still have a few problems.
The drives are traveling more than what is indicated on the screen, but
I have noticed there is a calibration option, which I will try.
The other problem I am having
On 12/29/2013 11:30 AM, Peter C. Wallace wrote:
On Sun, 29 Dec 2013, Josiah Morgan wrote:
Date: Sun, 29 Dec 2013 11:07:53 -0600
From: Josiah Morgan josiahmor...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
On 29/12/2013, Paul Midgley paul.midgle...@gmail.com wrote:
Hello
Thanks to everyones help, I have managed to get my cnc machine working
in jogging mode, but I still have a few problems.
The drives are traveling more than what is indicated on the screen, but
Set your scale correctly
I
On 12/29/2013 10:17 AM, Konstantin Navrockiy wrote:
I try to give few commands MDI,
error:
'maximum number of queued MDI commands exceeded'
how to fix it?
... snip
I may have had a similar problem to yours. I fixed it by creating an 'o'
subroutine file, then calling the file from the MDI
On 29 dec. 2013, at 19:06, Michael Haberler mai...@mah.priv.at wrote:
Am 29.12.2013 um 18:25 schrieb Bas de Bruijn bdebru...@luminize.nl:
so please try the delta config
I have found it in sim/axis/rdelta.ini
I get a TK screen with a rotary delta. But this is a simulation if I’m not
Hi all!
I used the same approach as Kirk, but I've found some interesting
behaviour when running this subroutine file: If no program file is
loaded at the moment the MDI command is issued, it fails with the error
message Unable to open file xy (or similar wording, can't test it
right now).
Do you
On 29 Dec 2013, at 19:12, Charles Steinkuehler char...@steinkuehler.net wrote:
On 12/29/2013 11:25 AM, Bas de Bruijn wrote:
On 29 Dec 2013, at 18:07, Michael Haberler mai...@mah.priv.at wrote:
I run the configuration from the configuration selector
My Configurations
—ARM
——BeagleBone
Hello!
Here's my toy to move with ubc3-ja4 on BBB.
http://youtu.be/ouyx65C7L-o
Charles and Michael, thanks a lot for your help!
The whole control is not quite stable, it freezes time by time. And
something's wrong with the axes limits, I have to figure it out yet.
Andrew
On 12/29/2013 1:21 PM, Bas de Bruijn wrote:
I also tend to keep around a bunch of SD cards for experimenting,
some with JA4 and some with the plain UBC branch.
Yes, I had made a mental note to buy some 4GB sd cards tomorrow. Is
there a way to (easy) back up stable situations and when the
I have another idea:
I wanted to do the reverse Gcode (using commands MDI)
--
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application
On 12/29/2013 1:22 PM, Andrew wrote:
Hello!
Here's my toy to move with ubc3-ja4 on BBB.
http://youtu.be/ouyx65C7L-o
Charles and Michael, thanks a lot for your help!
Now that's cool!!!
The whole control is not quite stable, it freezes time by time. And
something's wrong with the axes
On 29 Dec 2013, at 20:40, Charles Steinkuehler char...@steinkuehler.net wrote:
On 12/29/2013 1:21 PM, Bas de Bruijn wrote:
I also tend to keep around a bunch of SD cards for experimenting,
some with JA4 and some with the plain UBC branch.
Yes, I had made a mental note to buy some 4GB sd
On 12/29/2013 1:59 PM, Bas de Bruijn wrote:
On 29 Dec 2013, at 20:40, Charles Steinkuehler
char...@steinkuehler.net wrote:
When I'm actively developing, I typically don't keep LinuxCNC on
the SD card, but mount a remote NFS share where I usually have
multiple LinuxCNC directories on
2013/12/29 Charles Steinkuehler char...@steinkuehler.net
Now that's cool!!!
Thanks!
What happens when it freezes? Are there any error messages on the
serial console port?
I haven't paid much attention... Sometimes it just froze and the mouse did
not move (but that could be a power
congratulations! that's quite an achievement!
cheers
- Michael
Am 29.12.2013 um 20:22 schrieb Andrew pkm...@gmail.com:
Hello!
Here's my toy to move with ubc3-ja4 on BBB.
http://youtu.be/ouyx65C7L-o
Charles and Michael, thanks a lot for your help!
The whole control is not quite stable,
I found:
http://git.mah.priv.at/gitweb?p=emc2-dev.git;a=blob;f=src/emc/task/emctaskmain.cc;h=e6a93ed5cdf1a1ae6886398f1453eabf2ce95df6;hb=d4d4b07fb3a95459c5e41069825a5036e127586a#l3171
(it can help))
--
Rapidly
please note - I did the original diagnosis and initial code you referred to
however, the current code in master was worked over by Seb, you might want to
talk to him
I am unclear about the status - the way I understand it is that there is
currently no backpressure mechanism on the MDI queue
-
On 29 December 2013 18:46, Paul Midgley paul.midgle...@gmail.com wrote:
The other problem I am having is that I cannot get the examples to run,
Most of them need to be touched off to move the sample code inside
the work envelope.
--
atp
If you can't fix it, you don't own it.
I got one of these for free, just because the company was giving them
away. It has a header to connect to a Raspberry Pi.
http://xmos.com/startkit
'Course it doesn't have pin headers soldered into any of the holes.
Costs less to make that way and makes it easier to permanently solder
On Sun, Dec 15, 2013 at 3:21 PM, Sebastian Kuzminsky s...@highlab.com wrote:
Hi folks, this is an announcement and request for wider testing.
Thanks to the efforts of our developers memleak and CaptainHindsight,
and of RTAI developers ShabbyX and Pierangelo Masarati and others, we
have a
On Sun, Dec 29, 2013 at 8:49 PM, Eric Keller eekel...@psu.edu wrote:
Running the 10.04 vanilla liveCD from a usb flash drive on my system
results in latencies on the order of 6 uS with anything I can throw at
it. Same system, this 32 bit rtai kernel hits 1300 uSec if I open 10
firefox tabs.
(I may have sent a duplicate message, apologies if I did...)
Hi Andy,
I should point out the ramping was originally raised as an idea by Greg
Bentzinger, I just suggested a few ways to implement it. Out of curiosity,
I started a feature branch to see what it would take to do this, and the
36 matches
Mail list logo