Hi Andy .
I was reading the man page of mux_generic component and I see :
*mux-gen.**NN**.sel-bit**MMM* bit in (M=0..N)
* mux-gen.**NN**.sel-int**MMM* unsigned in
and you write in the previous message :
mux_gen.0.sel0
mux_gen.0.sel1
What is the right semantic ?
Alex
On Mon, Sep 22, 2014 at
Hi.
I have the same problem with the mail of Gregg (I'm using a Google account)
.
This anomaly starts few weeks ago .
Alex
On Thu, Sep 18, 2014 at 11:51 AM, andy pugh bodge...@gmail.com wrote:
On 18 September 2014 09:59, Mark Wendt wendt.m...@gmail.com wrote:
Gmail is doing the same thing
to block processing speed.
If I'm doing something wrong , please help me to understand .
Alex
On Sat, Sep 13, 2014 at 4:18 AM, Jon Elson el...@pico-systems.com wrote:
On 09/12/2014 12:03 PM, alex chiosso wrote:
Hi Jon.
Thank you for the replay .
The part program is not so big (120 lines code
, Jon Elson el...@pico-systems.com wrote:
On 09/13/2014 02:56 AM, alex chiosso wrote:
When I load or reload the NC program into Axis UI the interpreter is
scanning the NC file and detecting also the internal (subroutine) calls
to
custom M1xx codes.
But what I can see is that when NC program
Hi Marius.
My 1 cent opinion is to by a new DC spindle drive according to the motor
specification .
Nowadays this kind of drives are not too expensive .
This kind of motor seems to be a sort of custom made for EMCO so you should
also verify the old drive
specifications and wiring diagram to be
marius.alks...@gmail.com
wrote:
I think instead of buying some new DC spindle drive my customer would
choose replacing this motor with simple AC motor and buying new 3-phase
VFD.
On 2014.09.12 10:00, alex chiosso wrote:
Hi Marius.
My 1 cent opinion is to by a new DC spindle drive according
Hi people.
I'm testing some NC code on a simulation configuration 3 axis .
I notice that during the NC program execution the pc is using the hard
drive .
As soon the program execution is stopped the hard drive is not used .
I believed that the NC program is loaded into the RAM memory so during the
to have a sort of latency.
Can you explain me why only a part of the NC program is loaded (as you say
only few K bytes), what is the bottle neck ?
Regards
Alex
On Fri, Sep 12, 2014 at 6:17 PM, Jon Elson el...@pico-systems.com wrote:
On 09/12/2014 05:27 AM, alex chiosso wrote:
Hi people
Hi Rene.
I should be there so I hope to learn more about the EtherCAT application
and EtherCAT---CanOpen interface.
Regards
Alex
On Tue, Sep 9, 2014 at 3:48 PM, Rene Hopf reneh...@mac.com wrote:
Hi,
Have you decided on a date?
Are the ABB robots still available?
I will bring my AC Servo
Hi Gene.
I've found a small video on YouTube just for your needs.
How to make a simple gcode with QCad and LinuxCNC
https://www.youtube.com/watch?v=CQRpKdKG46M (formerly EMC you know
it of course).
I hope this help.
Regards
Alex
On Mon, Sep 8, 2014 at 5:46 PM, Churms, Cecil
Hi to all.
Just to show an amazing sewing technology .
Robot Sewing Machine https://www.youtube.com/watch?v=_i4cfQGe8fY
I do believe that in this case a synchronicity between robot axis and
needle position is needed.
Regards
Alex
On Fri, Aug 29, 2014 at 6:04 PM, alex chiosso achio...@gmail.com
Another amazing sewing application .
Robot sews car seats cover https://www.youtube.com/watch?v=2Qwqxpcr2zA
On Sun, Sep 7, 2014 at 11:20 AM, alex chiosso achio...@gmail.com wrote:
Hi to all.
Just to show an amazing sewing technology .
Robot Sewing Machine https://www.youtube.com/watch?v
If the holes are deeper doesn't it means that the motor is making more
steps and not less ?
Is it possible that you have extra steps due to noises or bad connections
PC --- BoB --- Gecko Drive ?
Alex
On Thu, Sep 4, 2014 at 5:07 PM, Viesturs Lācis viesturs.la...@gmail.com
wrote:
Hello!
I
As Gene is suggesting , here
http://linuxcnc.org/index.php/english/forum/16-stepconf-wizard/27293-solved-tuning-stepper-motor-with-gecko-201-driver?start=10
is a discussion on the forum regarding problems with steps and Gecko
Drive .
A question for you ... the router is brand new (I mean that you
that the drift in is both directions. But the axis (motor) is
always making more space than expected , isn't it ?
Alex
On Thu, Sep 4, 2014 at 5:29 PM, alex chiosso achio...@gmail.com wrote:
As Gene is suggesting , here
http://linuxcnc.org/index.php/english/forum/16-stepconf-wizard/27293-solved-tuning
viesturs.la...@gmail.com
wrote:
2014-09-04 18:32 GMT+03:00 alex chiosso achio...@gmail.com:
Means that the drift in is both directions. But the axis (motor) is
always making more space than expected , isn't it ?
Yes, drift can be in any direction, but the change of direction
happens only
...@hb9etc.ch wrote:
Hi Alex!
On 27.08.2014 22:04, alex chiosso wrote:
Hi Philipp.
Thank you so much for the very detailed informations .
You are considering to move the needle as a spindle with the S parameter
to
define the rpm and the
Exactly.
Z axis position how is it derived from
Hi Gregg.
Yes this device should be fast enough.
The problem is how to integrate it with the current machanic structure.
You have to consider also that the operator need the right space where to
lay the fabric (i.e. the jacket).
Regards
Alex
On Fri, Aug 29, 2014 at 5:29 PM, alex chiosso achio
axis movements ?
How much is the distance between the fabric and the top needle position ?
Alex
On Thu, Aug 28, 2014 at 2:37 AM, Gregg Eshelman g_ala...@yahoo.com wrote:
On 8/27/2014 11:44 AM, alex chiosso wrote:
Hi Philipp .
You point to the right direction.
I need a full control over
Hi to all.
A few years ago I made the electrical/electronic/software integration of
such a kind of machine.
An industrial grade sewing machine adapted/converted in the way to
automatically sew labels on clothes (jackets mainly) with a programmable
but fixed path .
Programmable because the operator
and looper in open
loop. Your G-code could be written to just stop X and Y when the needle
is below the surface of the fabric.
On 08/27/2014 10:21 AM, alex chiosso wrote:
The application can appear trivial but it is not especially because of
needle speed and sycronization between the needle
)
Finish Loop
Needle to max height
Move X and/or Y
https://www.youtube.com/watch?v=BAvQBLHMrw4
On 08/27/2014 10:58 AM, alex chiosso wrote:
Hi Bari.
Nice to know you.
Have you experience with this particular application ?
So for you closed loop positioning it's not needed
steps. Especially if you want to move really fast and
have a variable load.
Just a few thoughts.
Regards,
Philipp
On 27.08.2014 18:55, alex chiosso wrote:
Bari , thank you for your reply.
How is working a sewing machine for me it is clear (I really did the
application I described).
I
machines, video below.
Originally spindle speed was fully synced with xy velocity but was
disabled due to mechanical problems (it won't saw on lower speeds).
http://www.youtube.com/watch?v=aopjsU7Q5V8
regards,
Michael
W dniu 27.08.2014 19:44, alex chiosso pisze:
Hi Philipp .
You point
Hi Michal.
You are using 5i25 + 7i77 + 7i76 from Mesa .
Well done !
On Wed, Aug 27, 2014 at 8:42 PM, alex chiosso achio...@gmail.com wrote:
Hi Michal .
Your application is really impressive !!!
Are you using open o closed loop , stepper or servo motors ?
For the program did you develop
27, 2014 at 9:00 PM, andy pugh bodge...@gmail.com wrote:
On 27 August 2014 16:21, alex chiosso achio...@gmail.com wrote:
I would like to discuss with you what do you think about the conversion
to
LCNC.
One very easy way (maybe too easy) would be to pass needle height
through a lincurve
On Wed, Aug 27, 2014 at 9:34 PM, Philipp Burch p...@hb9etc.ch wrote:
Hi Alex!
On 27.08.2014 21:13, alex chiosso wrote:
Hi Andy.
You are always a good advisor .
I'm not so trained on LCNC as you are.
I never use the lincurve component so can you explain me what it is and
how
it works
Hi Christian .
Let us know as soon as possible
Regards
Alex
On Mon, Aug 11, 2014 at 4:50 PM, Christian Stöveken
christian.stoeve...@gmail.com wrote:
On Tue, Jul 29, 2014 at 12:24 PM, alex chiosso achio...@gmail.com wrote:
Hi Christian.
4-5 October is fine for me.
Keep in touch
?
will it be something new thing in classic ladders in LCNC 2.6?
thanks
aram
On Sun, Aug 3, 2014 at 2:39 AM, alex chiosso achio...@gmail.com wrote:
Hi Aram.
Go to this link https://sites.google.com/site/classicladder/ for a
complete information on Classic Ladder stand alone version
Hi Aram.
Go to this link https://sites.google.com/site/classicladder/ for a
complete information on Classic Ladder stand alone version (the original
one).
The site is the official supported by the French author Marc Le Douarain.
I suggest to you to use Modbus RS485 or TCP/IP (that is a built in
Hi Christian.
4-5 October is fine for me.
Keep in touch.
Regards
Alex Chiosso
On Mon, Jul 28, 2014 at 5:39 PM, Christian Stöveken
christian.stoeve...@gmail.com wrote:
On Sun, Jun 29, 2014 at 2:54 PM, Viesturs Lācis viesturs.la...@gmail.com
wrote:
2014-06-27 17:08 GMT+03:00 Christian
Hi Christian ,
happy to read about the Integrator Meeting 2014 planning .
This time I want to be in Stuttgart to know smart people like you and the
other LinuxCNC power users.
I want to learn something interesting from real geeks .
Keep in touch .
Alex
On Fri, Jun 27, 2014 at 4:08 PM,
Hi , Viesturs.
I found this
documenthttp://www.cressall.com/brakingresistors/downloads/Calculating%20brake%20resistance.pdfthat
may be useful .
I do believe that 100W should be ok for a 500W motor .
Of course the calculation is related to the energy that have to be
dissipated during the braking
Hi Bertho .
First of all I would say to you thank you .
Your project seems to be useful especially for a general purpose LCNC
application like material handling or non machine tool specific application.
For example a palletizer or a cartesian robot for machine tool feeding.
The best of all as
, 2013 at 10:24 PM, Sven Wesley svenne.d...@gmail.com wrote:
2013/9/7 alex chiosso achio...@gmail.com
Hi Sven.
Sorry to say I'm wrong.
The first one is ok I made a mistake with the site reservation
simulation.
This option seems to be the best one for me.
Thank you so much
As I understood from the wiki page the meeting date is October 19th and
20th 2013 or isn't it ?
Alex
On Fri, Oct 18, 2013 at 6:15 PM, Martin Schöneck c...@martinschoeneck.dewrote:
Hi all,
maybe I missed some information on this list, the wiki, or the pad, but
does this meeting really
Hi Christian .
I would like to be to your nice workshop .
The opportunity seems to be unique for European LinuxCNC users.
Germany seem to be centre of the Europe !!!
I'm trying to do my best to be present at the meeting .
Can you list one or more possible accomodations close to your workshop ?
I
-neckarpark.jugendherberge-bw.de
And this place (with nice reviews) is close too, about the same distance as
the hostel.
http://www.gaestehausstuttgart.de/
Regards,
Sven
2013/9/7 alex chiosso achio...@gmail.com
Hi Christian .
I would like to be to your nice workshop .
The opportunity
Hi Sven.
Sorry to say I'm wrong.
The first one is ok I made a mistake with the site reservation
simulation.
This option seems to be the best one for me.
Thank you so much.
Alex
On Sat, Sep 7, 2013 at 6:25 PM, alex chiosso achio...@gmail.com wrote:
Hi Sven.
Thank you for your quick
Hi Anders.
In case you did'nt look at this thishttp://www.ethercat.org/en/ethercat.html.
I hope this help.
Alex
On Mon, Sep 2, 2013 at 12:22 PM, Anders Wallin
anders.e.e.wal...@gmail.comwrote:
Hi Anders.
This is one link to the LinuxCNC wiki : EtherCAT LinuxCNC
Hi Anders.
Another link http://www.ethercat.org/pdf/english/ETG_Brochure_EN.pdf for
you.
Alex
On Mon, Sep 2, 2013 at 12:22 PM, Anders Wallin
anders.e.e.wal...@gmail.comwrote:
Hi Anders.
This is one link to the LinuxCNC wiki : EtherCAT LinuxCNC
Hi Anders.
For I/O control Modbus TCP/IP is quite a good solution .
For motor control (closed loop system) it is not the right one.
As you can imagine the matter is the protocol itself .
Modbus TCP/IP it's not deterministic so the jitter can be unpredictable and
maybe
few and more milliseconds in
Hi Anders.
This is one link to the LinuxCNC wiki : EtherCAT LinuxCNC
Wikihttp://wiki.linuxcnc.org/cgi-bin/wiki.pl?EtherCatDriver
.
Alex
On Fri, Aug 30, 2013 at 4:36 PM, Anders Wallin
anders.e.e.wal...@gmail.comwrote:
Hi all,
I'm thinking about various control data-acquisition systems I
Hi Viesturs.
Did you already check the motor windings resistence/impedence ?
Did the motor get any kind of torque ?
On Fri, Jul 5, 2013 at 6:25 PM, Viesturs Lācis viesturs.la...@gmail.comwrote:
2013/7/5 Jon Elson el...@pico-systems.com
Viesturs Lācis wrote:
The drive is ok, motor is
a cable chain ?
If yes are you sure that the cable fitting respect the manufacturer
specifications ?
On Fri, Jul 5, 2013 at 6:34 PM, alex chiosso achio...@gmail.com wrote:
Hi Viesturs.
Did you already check the motor windings resistence/impedence ?
Did the motor get any kind of torque
First all the cable must be shielded.
Secondary fot this kind of application you need at least flexible shielded
cables.
If you search for on google I am sure you will find many cable
manufacturers for that kind.
Il giorno 05/lug/2013 17:57, Viesturs Lācis viesturs.la...@gmail.com ha
scritto:
/lug/2013 18:23, andy pugh bodge...@gmail.com ha scritto:
On 5 July 2013 18:12, alex chiosso achio...@gmail.com wrote:
First all the cable must be shielded.
Secondary fot this kind of application you need at least flexible
shielded
cables.
However, the problem here is nothing to do with lack
Hi people.
First of all I'm agreed with Steve Blackmore .
Yesterday I joined the IRC meeting and I don't know if there was a
misunderstanding about the GMT time meeting but for the first 15-20 and
maybe more minutes the discussion was a free chatting without any real
concrete object .
So I left
Lācis
viesturs.la...@gmail.comwrote:
2013/6/30 alex chiosso achio...@gmail.com
Yesterday I joined the IRC meeting and I don't know if there was a
misunderstanding about the GMT time meeting but for the first 15-20 and
maybe more minutes the discussion was a free chatting without any real
Hi people.
I'm logged in right now but I never use IRC
What I have to do after the login ?
Alex
On Sat, Jun 29, 2013 at 3:24 PM, Charles Steinkuehler
char...@steinkuehler.net wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
#linuxcnc-meet on irc.freenode.net
Web client via:
Thanks Dave.
On Sat, Jun 29, 2013 at 4:03 PM, Dave Caroline
dave.thearchiv...@gmail.comwrote:
On Sat, Jun 29, 2013 at 2:31 PM, alex chiosso achio...@gmail.com wrote:
Hi people.
I'm logged in right now but I never use IRC
What I have to do after the login ?
read...
type when you
Hi Charles.
If I'm not wrong in HAL you can setup threads as you need.
So I believe that perform the PID every 1ms is too fast and not needed for
a relatively slow
temperature control.
Also because you have a 20ms reading temperature cycle.
If you look at the HAL User Manual you will find the
Hi Viestus.
The fact that you reduced the P gain from 400 to 15 it's strange (it is a
big change).
Do you see any change after P gain modification (the noise frequency
change) ?
How is the mechanical coupling made ?
Is there any backlash on the coupling ?
If the motion is made by ball and nuts
Hi Viestus.
Another thing Do you see a change behavior if you increase the speed
movement ?
bigalex
On Thu, Jun 20, 2013 at 3:52 PM, alex chiosso achio...@gmail.com wrote:
Hi Viestus.
The fact that you reduced the P gain from 400 to 15 it's strange (it is a
big change).
Do you see any
Are you able to do the axis homing ?
If yes can you perform an MDI movement to a position G01 F... X check
if the gantry axis position read are the same and check if you have
mechanical misalignment between them ?
So repeat the movement to another position and re-check ?
If you have noise
Another thing check the ferror compared to the command .
alex
On Thu, Jun 20, 2013 at 5:10 PM, alex chiosso achio...@gmail.com wrote:
Are you able to do the axis homing ?
If yes can you perform an MDI movement to a position G01 F... X
check if the gantry axis position read
Hi people.
Reading this mail I discovered Rockhopper python interface feature that
honestly I have never heard before.
First of all it seems to be very useful.
It shows the hal file component connections graphically.
Is this feature available independently from Rockhopper python interface ?
I mean
. A
schematic algorithm, like Ed is using in Eagle, would do a better job of
not running lines on top of each other, etc.
-Tom
On Jun 18, 2013, at 3:41 AM, alex chiosso achio...@gmail.com wrote:
Hi people.
Reading this mail I discovered Rockhopper python interface feature that
honestly I have never
Thanks Ed.
Go ahead please.
I know that list all the different components and modules and cards is a
massive job to do.
Your way seems to be very promising.
Regards
Alex
On Tue, Jun 18, 2013 at 1:40 PM, Ed Nisley ed.08.nis...@pobox.com wrote:
On 06/18/2013 03:41 AM, alex chiosso wrote
Hi people.
I'm from Northern Italy and I would be happy to participate to a meeting in
southern Germany
(Munich or Landshut that for me is about 500/600km ).
Of course during the weekend time. :-)
Alex
On Tue, Jun 11, 2013 at 12:33 PM, Maximilian H
mhemc2nos...@googlemail.comwrote:
Hello
Hi this is a very interesting discussion.
A couple of days ago i went to an
exhibitionhttp://www.sps-italia.net/en/inside.aspdedicated to the
automation sector and I met an interesting small
company http://www.promax.it/index_en.html that make CNC and motion
controller with integrated PLC and they
Hi Dave .
Maybe you are misunderstanding my message.
This video shows how the company that is making the CNC hardware solution
is integrating their hardware/software
with that gantry machine (woodworking I think).
The machine seem to work well but I don't know what specifc solution they
did.
They
101 - 162 of 162 matches
Mail list logo
