On Fri, 4 Jun 2021 at 00:06, andrew beck wrote:
> i have been just having a play for the last 10 mins. does your generators
> make actual G code that the backplot can see and that I can run as a
> program? and start with cycle start
No, it just makes the programmed feature when you press
ok gmccapy works with your setup.
i have been just having a play for the last 10 mins. does your generators
make actual G code that the backplot can see and that I can run as a
program? and start with cycle start
currently its like there is no program just almost jogging going on behind
the
> On 3 Jun 2021, at 23:44, andrew beck wrote:
>
> might be another issue
Start LinuxCNC from the command line and see if there are any error messages.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
ok had a few dumb moments
then thought to click on the link and try just download it which worked
good with the package installer.
but it just says that the same version is already installed.
might be another issue
On Fri, Jun 4, 2021 at 10:30 AM andy pugh wrote:
> On Thu, 3 Jun 2021 at
On Thu, 3 Jun 2021 at 23:12, andrew beck wrote:
> tried adding repositories but getting stuck
It's in the LinuxCNC Buster archive:
http://www.linuxcnc.org/dists/buster/base/binary-amd64/
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of
just trying this and getting stuck. using linuxmint 19.3
sudo apt-get install python-rsvg.
[sudo] password for cnc:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package python-rsvg.
E: Couldn't find any package by glob
On Thu, Jun 3, 2021 at 8:06 AM Andy Pugh wrote:
>
>
> > On 3 Jun 2021, at 12:50, andrew beck wrote:
> >
> > Like apt-get python-rsvg?
>
> Yes.
>
That should be apt-get install python-rsvg.
Mark
___
Emc-users mailing list
> On 3 Jun 2021, at 12:50, andrew beck wrote:
>
> Like apt-get python-rsvg?
Yes.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Like apt-get python-rsvg?
On Thu, Jun 3, 2021, 6:53 PM Andy Pugh wrote:
>
>
> > On 2 Jun 2021, at 22:26, andrew beck wrote:
> >
> > Hmm I'm getting buttons but non of your fancy images.
>
> You might need to install python-rsvg
>
>
>
> ___
>
> On 2 Jun 2021, at 22:26, andrew beck wrote:
>
> Hmm I'm getting buttons but non of your fancy images.
You might need to install python-rsvg
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
Hmm I'm getting buttons but non of your fancy images.
Must be missing something
On Thu, Jun 3, 2021, 9:20 AM andrew beck wrote:
> OK firing up lathe as we speak about to test
>
> On Thu, Jun 3, 2021, 9:12 AM Andy Pugh wrote:
>
>>
>>
>> > On 2 Jun 2021, at 22:04, andrew beck wrote:
>> >
>> >
OK firing up lathe as we speak about to test
On Thu, Jun 3, 2021, 9:12 AM Andy Pugh wrote:
>
>
> > On 2 Jun 2021, at 22:04, andrew beck wrote:
> >
> > Can I just open the sample install and test it?
>
> I think so. It’s been a few years since I wrote it.
>
>
> On 2 Jun 2021, at 22:04, andrew beck wrote:
>
> Can I just open the sample install and test it?
I think so. It’s been a few years since I wrote it.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
Andy that's awesome!
Can I just open the sample install and test it?
On Thu, Jun 3, 2021, 5:38 AM andy pugh wrote:
> On Wed, 2 Jun 2021 at 05:50, andrew beck wrote:
> >
> > Never used the Mach ones. But anything like the path pilot stuff.
> >
> > Eg profile cycles
> > Parting
> > Facing
> >
You sound like my grandfather. He's 88 and still going strong. Be careful
out there, we like having you on this side of things.
Phil T.
The Feral Engineer
Check out my LinuxCNC tutorials, machine builds and other antics at
www.youtube.com/c/theferalengineer
On Wed, Jun 2, 2021, 3:00 PM Gene
On Wednesday 02 June 2021 12:26:33 Gerrit Visser wrote:
> Hi Gene
> From discussions with users of my now-archived Gui, they were using it
> for anything from laser 'etching' wood with a lot of tiny moves to a
> Bridgeport and 2" facemills.
> Grbl is quite capable, people get hung up on the lack
grbl is best compared to the "Marlin" software that drives most 3D
printers. Both are very different from LCNC. Marlin and grbl are really
similar in many ways.
1) Marlin and grbl both run on Arduino, even the low-end "Uno".
2) They are VERY efficient because the configuration is done in the
On Wed, 2 Jun 2021 at 05:50, andrew beck wrote:
>
> Never used the Mach ones. But anything like the path pilot stuff.
>
> Eg profile cycles
> Parting
> Facing
> Threading
> Taper threading
> Tapping
> Grooving
> Straight Turning
Have you seen:
Hi Gene
>From discussions with users of my now-archived Gui, they were using it for
anything from laser 'etching' wood with a lot of tiny moves to a Bridgeport
and 2" facemills.
Grbl is quite capable, people get hung up on the lack of some G codes and
tool changes but for the most part in small
Hi, I've got this one. Really pleased with it. Using it with Probe_Basic
HANNspree HT225HPB 1080p Full HD 21.5
https://www.amazon.co.uk/gp/product/B01F3636V0
Ed W
On 02/06/2021 00:07, John Dammeyer wrote:
> If I wanted to set up a Pi4 with LinuxCNC and a touch screen is there any
>
On Wednesday 02 June 2021 06:55:42 Gerrit Visser wrote:
> That is totally on the person who put it on Github, there are plenty
> of ways to illustrate and describe what a project is. That is what the
> Wiki section is for. I find the terse method rather prevalent amongst
> FOSS projects. Just
That is totally on the person who put it on Github, there are plenty of ways
to illustrate and describe what a project is. That is what the Wiki section
is for. I find the terse method rather prevalent amongst FOSS projects. Just
like the 'who needs a manual, just read the code' approach.
This
rhaps that's what my question about touch screens is all about.
John
-Original Message-
From: Gregg Eshelman via Emc-users [mailto:emc-users@lists.sourceforge.net]
Sent: June-01-21 11:55 PM
To: Enhanced Machine Controller (EMC)
Cc: Gregg Eshelman
Subject: Re: [Emc-users] Touch screen for Lin
ia Emc-users [mailto:emc-users@lists.sourceforge.net]
> Sent: June-01-21 11:55 PM
> To: Enhanced Machine Controller (EMC)
> Cc: Gregg Eshelman
> Subject: Re: [Emc-users] Touch screen for LinuxCNC
>
> I always liked the rotary click wheel on many CRT monitors. Nice big wheel
>
that I've seen on the forum.
-Original Message-
From: John Dammeyer [mailto:jo...@autoartisans.com]
Sent: Wednesday, 2 June 2021 3:17 PM
To: 'Enhanced Machine Controller (EMC)'
Subject: Re: [Emc-users] Touch screen for LinuxCNC
These are from 2011 or so.
https://github.com/LinuxCNC/wizards
I always liked the rotary click wheel on many CRT monitors. Nice big wheel with
an offset dimple. Put fingertip in dimple and push to get the menu, spin to
highlight the configuration option then push. Spin again to select (for
example) vertical position then push and spin to move the raster up
k [mailto:andrewbeck0...@gmail.com]
> > Sent: June-01-21 9:47 PM
> > To: Enhanced Machine Controller (EMC)
> > Subject: Re: [Emc-users] Touch screen for LinuxCNC
> >
> > Never used the Mach ones. But anything like the path pilot stuff.
> >
> > Eg profile
These are from 2011 or so.
https://github.com/LinuxCNC/wizards
Is anyone using them?
> -Original Message-
> From: andrew beck [mailto:andrewbeck0...@gmail.com]
> Sent: June-01-21 9:47 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Touch scre
:
> Specifically what sort of wizards. Like the MACH ones?
>
> > -Original Message-
> > From: andrew beck [mailto:andrewbeck0...@gmail.com]
> > Sent: June-01-21 9:24 PM
> > To: Enhanced Machine Controller (EMC)
> > Subject: Re: [Emc-users] Touch scr
Specifically what sort of wizards. Like the MACH ones?
> -Original Message-
> From: andrew beck [mailto:andrewbeck0...@gmail.com]
> Sent: June-01-21 9:24 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Touch screen for LinuxCNC
>
> Need to ge
m: Frank Tkalcevic [mailto:fr...@franksworkshop.com.au]
> > Sent: June-01-21 9:10 PM
> > To: 'Enhanced Machine Controller (EMC)'
> > Subject: Re: [Emc-users] Touch screen for LinuxCNC
> >
> > The version of touchy I'm running doesn't have the 3d preview. I'm
> using
>
Nicely done!
> -Original Message-
> From: Frank Tkalcevic [mailto:fr...@franksworkshop.com.au]
> Sent: June-01-21 9:10 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] Touch screen for LinuxCNC
>
> The version of touchy I'm running doesn'
age-
> From: Frank Tkalcevic [mailto:fr...@franksworkshop.com.au]
> Sent: June-01-21 6:47 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] Touch screen for LinuxCNC
>
> I got one of these...
>
> https://www.aliexpress.com/item/32886510797.
lcevic [mailto:fr...@franksworkshop.com.au]
> Sent: June-01-21 6:47 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] Touch screen for LinuxCNC
>
> I got one of these...
>
> https://www.aliexpress.com/item/32886510797.html
>
> The side brackets are r
I got one of these...
https://www.aliexpress.com/item/32886510797.html
The side brackets are removable and it has vesa mounting holes on the back.
I use it with a PC - HDMI and USB connection. I use it with touchy.
-Original Message-
From: John Dammeyer
On 06/01/2021 06:07 PM, John Dammeyer wrote:
If I wanted to set up a Pi4 with LinuxCNC and a touch screen is there any
particular one that jumps out as the best solution?
And with an LCD display/touch screen other than 'axis' what is a more usable screen?
You may want to use "touchy"
une-01-21 6:10 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Touch screen for LinuxCNC
>
> https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=elo+1525L&_sacat=0
>
> I have used these before. The USB version just
I favor the Touchy interface. You will need jog buttons and any other
button that could possibly cause machine motion. Touchy was written to not
allow machine motion from the touchscreen.
On Tue, Jun 1, 2021 at 8:07 PM John Dammeyer wrote:
> I have an older wired Pendant like this one.
>
>
//www.amazon.ca/gp/product/B004C4WTJA/
> No problems.
>
> -Original Message-
> From: Gerrit Visser
> Sent: June 1, 2021 7:22 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] Touch screen for LinuxCNC
>
> I bought this last month for use with
I have an older wired Pendant like this one.
https://www.amazon.ca/Wireless-Mach3-Pendant-Handwheel-Mac-Mach/dp/B00SH0V1P8
I waffle back and forth between keyboard operations and the pendant. I'm not
sure how useful the touch screen would be relative to a pendant and keyboard.
At some
I've been using this with PathPilot since 2015:
https://www.amazon.ca/gp/product/B004C4WTJA/
No problems.
-Original Message-
From: Gerrit Visser
Sent: June 1, 2021 7:22 PM
To: 'Enhanced Machine Controller (EMC)'
Subject: Re: [Emc-users] Touch screen for LinuxCNC
I bought this last
Engineer [mailto:theferalengin...@gmail.com]
> > Sent: June-01-21 4:14 PM
> > To: Enhanced Machine Controller (EMC)
> > Subject: Re: [Emc-users] Touch screen for LinuxCNC
> >
> > I have a planar pct2235 and an asus vct229. Recommend the asus. The
> planar
> > h
I bought this last month for use with Pathpilot. Works great. Resistive
touch so not sensitive to wet fingers.
https://www.amazon.ca/gp/product/B083WF327D
CA$250 plus HST
Gerrit
-Original Message-
From: John Dammeyer
Sent: June 1, 2021 7:07 PM
To: Enhanced Machine Controller (EMC)
]
DISPLAY = axis
John
> -Original Message-
> From: Feral Engineer [mailto:theferalengin...@gmail.com]
> Sent: June-01-21 4:14 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Touch screen for LinuxCNC
>
> I have a planar pct2235 and an asus vct22
I have a planar pct2235 and an asus vct229. Recommend the asus. The planar
has an issue where if you jog from the screen buttons and multi touch on
accident, the jog button latches and takes off.
Phil T.
The Feral Engineer
Check out my LinuxCNC tutorials, machine builds and other antics at
45 matches
Mail list logo