Hi Durk
Durk Talsma writes
Also, note that including the MD-11 at this stage is not my first
preference:
that would be including the new traffic manager and AIFlightplan code, and
use *only* the 737 traffic.
On the other hand: The MD-11 *is* the first aircraft that has multi livery
support, whi
No more crash with these files installed.
-Fred
> I'll wrap up the new traffic files tonight. I the mean time, I've add
small
> tar file containing the necessary traffic files. Should work, but haven't
had
> much chance of testing it.
>
> Cheers,
> Durk
>
> On Friday 23 July 2004 07:21, Frederic
Norman Vine wrote:
> Sent: 23 July 2004 05:00
> To: FlightGear developers discussions
> Subject: RE: [Flightgear-devel] Latest OpenAL for new build?
>
> Jon Berndt writes:
> > > >
> > > > Right now we are relying on Norman Vine's OpenAL files. We must just
> hope
> > > > that Norman can find th
Jim Wilson wrote:
This is a workaround for an issue where the xml dialogs were shrinking on
subsequent pops.
Committed. Thanks.
Erik
___
Flightgear-devel mailing list
[EMAIL PROTECTED]
http://mail.flightgear.org/mailman/listinfo/flightgear-devel
Jon S Berndt wrote:
\
Is the MD-11 a JSBSim aircraft? I thought it was, but I don't recall it
being in our CVS ... is the AI aircraft its own FDM?
It is and it's in JSBSim CVS (since about two weeks).
AIModels are driver by a very (very) simple FDM that basically makes
sure the aircraft goes in
Ampere K. Hardraade wrote:
I think someone should implement the followings:
1. Treat each taxi way as a line.
2. Joint the end of two taxi ways together.
http://www.student.yorku.ca/~ampere/STEP1.jpg
3. Apply fillet.
http://www.student.yorku.ca/~ampere/STEP2.jpg
4. Apply loth.
http://www.student.
Jim Wilson wrote:
Just tried CVS and we're aborting right after the log entry for Traffic Manager.
BTW I noticed in the command line help we're showing "0=verbose, 5=alerts
only", but I think the numbers do not apply. I'd change it, but I'm not
100% sure what all the log-level options are.
I'm n
Jonathan Polley wrote:
I just updated tonight and FlightGear no longer runs on the Mac. As of
last night, everything ran just file, but after updating everything
(SimGear, FlightGear, and base packages) I get an abort.
Oops, sorry all. This is caused by me not including a bunch of
TrafficManage
Erik Hofman
> Sent: 23 July 2004 08:52
> To: FlightGear developers discussions
> Subject: Re: [Flightgear-devel] Latest CVS Aborts
>
> Jonathan Polley wrote:
> > I just updated tonight and FlightGear no longer runs on the Mac. As of
> > last night, everything ran just file, but after updatin
Hi guys!
Could you please tell me what's the status of BGL loader
Maybe someone did this work on imporing BGL scenery to flightgear or maybe
converting it to another formats (.3ds .ac )
Thanx in advance
Bye
Roman
___
Flightgear-devel mailing list
[EMAIL
Vivian Meazza wrote:
> Erik Hofman
>
> > Sent: 23 July 2004 08:52
> > To: FlightGear developers discussions
> > Subject: Re: [Flightgear-devel] Latest CVS Aborts
> >
> > Jonathan Polley wrote:
> > > I just updated tonight and FlightGear no longer runs on the Mac. As of
> > > last night, everythin
Frederic Bouvier asked
> Sent: 23 July 2004 11:14
> To: FlightGear developers discussions
> Subject: Re: [Flightgear-devel] Latest CVS Aborts
>
> Vivian Meazza wrote:
> > Erik Hofman
> >
> > > Sent: 23 July 2004 08:52
> > > To: FlightGear developers discussions
> > > Subject: Re: [Flightgear-de
Matthew wrote:
Just installed OpenAL via CVS, no difference...Still aborts.
Are you sure that the old one is completely uninstalled from your system?
And did you do a make clean and rerun configure in simgear and flightgear
afterwards?
All the best,
David
Erik Hofman wrote:
Ampere K. Hardraade wrote:
I think someone should implement the followings:
1. Treat each taxi way as a line.
2. Joint the end of two taxi ways together.
http://www.student.yorku.ca/~ampere/STEP1.jpg
3. Apply fillet.
http://www.student.yorku.ca/~ampere/STEP2.jpg
4. Apply loth.
I wrote
> Sent: 23 July 2004 11:49
> To: 'FlightGear developers discussions'
> Subject: RE: [Flightgear-devel] Latest CVS Aborts
>
>
>
> Frederic Bouvier asked
>
> > Sent: 23 July 2004 11:14
> > To: FlightGear developers discussions
> > Subject: Re: [Flightgear-devel] Latest CVS Aborts
> >
Vivian Meazza wrote:
> I've re-downloaded the current cvs. Here's the backtrace
...
>
> Can't say that it means anything to me! Is it any good to you, or can I do
> something else?
It looks like useless garbage, sorry. Do you run fg with --log-level=bulk
or whatever is the most verbose ( I don't
Frederic Bouvier wrote:
Vivian Meazza wrote:
I've re-downloaded the current cvs. Here's the backtrace
...
Can't say that it means anything to me! Is it any good to you, or can I do
something else?
It looks like useless garbage, sorry. Do you run fg with --log-level=bulk
or whatever
Curtis L. Olson writes:
>
> You have to compile with "-g" to include debugging symbols so that the
> back trace makes sense. That said, the very few times I've tried to run
> gdb with flightgear on windows, I was never very successful.
GDB might have some problems on 95,98 and WinMe, but runs
Norman Vine wrote
> Sent: 23 July 2004 14:15
> To: FlightGear developers discussions
> Subject: RE: [Flightgear-devel] Latest CVS Aborts
>
> Curtis L. Olson writes:
> >
> > You have to compile with "-g" to include debugging symbols so that the
> > back trace makes sense. That said, the very few
Frederic Bouvier asked
> Sent: 23 July 2004 13:51
> To: FlightGear developers discussions
> Subject: Re: [Flightgear-devel] Latest CVS Aborts
>
> Vivian Meazza wrote:
> > I've re-downloaded the current cvs. Here's the backtrace
> ...
> >
> > Can't say that it means anything to me! Is it any good
I'll stop whining, now. ;-)
I was able to build simgear and flightgear with the OpenAL libs.
Jon
___
Flightgear-devel mailing list
[EMAIL PROTECTED]
http://mail.flightgear.org/mailman/listinfo/flightgear-devel
Bernie Bright said:
> Jim Wilson wrote:
> >>
> >>globals->get_tile_mgr()->all_queues_empty() and cur_fdm_state->get_inited())
> >>{
> >>^^^
> >>^^^
> >>Same here.
> >
> >
> > That's a head scratcher. Never would have thought that would compile like
>
Jim Wilson wrote:
> Bernie Bright said:
>
> > Jim Wilson wrote:
> > >>
> > >>globals->get_tile_mgr()->all_queues_empty() and cur_fdm_state->get_inited())
> > >>{
> > >> ^^^
> > >>^^^
> > >>Same here.
> > >
> > >
> > > That's a head scratcher. Never would have thought that would compile like
> >
Very nice! Ok if I borrow the pilot dude for the p51 cockpit?
Now, should it come up running like the other A/C? My personal preference is
to not, but I think in the past folks have prefered aircraft already started.
FWIW (after release) I think a preset "e.g. --auto-start" that defaulted to
tr
On Friday 23 July 2004 15:23, Jim Wilson wrote:
>
> Sure enough, it's right there in Stroustrup. The strange part is never
> having noticed this before now. What is it with these developers at
> microsoft anyway? ;-)
>
Since when have they had developers?
Cheers,
Al
___
I noticed that the least bit of extra CPU/Bus activity can cause the sounds to
stutter after our switch to OpenAL. This might be a reason to remain
conservative with our sound files (e.g. 8bit Mono). This is especially
noticable on my system with the 16bit/44khz/Stereo merlin sample with the
Spit
On Friday 23 July 2004 15:21, Jon Berndt wrote:
> I'll stop whining, now. ;-)
>
> I was able to build simgear and flightgear with the OpenAL libs.
>
I've built it fine too - acutally being able to run it is a different matter.
Is it running for you? I've tried all sorts of openalrc files with
On Fri, 23 Jul 2004 16:05:13 +0100
Al West <[EMAIL PROTECTED]> wrote:
On Friday 23 July 2004 15:21, Jon Berndt wrote:
I'll stop whining, now. ;-)
I was able to build simgear and flightgear with the OpenAL libs.
I've built it fine too - acutally being able to run it is a different
matter.
Is i
It has been a while since this feature was added, but I thought Jon might
like to know that using his VRP feature I've succeeded in positioning the
Cessna 310 (U-3A) visual model identically under both JSBSim and YASim flight
dynamics models. The YASim config for the c310 has the origin placed a
For now anyway can we reduce this a level? This makes the airport not found
message (in ATC code only) warning level. I'm amazed at how often this gets
called.
Index: src/ATC/ATCutils.cxx
===
RCS file: /var/cvs/FlightGear-0.9/Flig
Jim Wilson wrote:
For now anyway can we reduce this a level? This makes the airport not found
message (in ATC code only) warning level. I'm amazed at how often this gets
called.
Good idea, it's committed.
Erik
___
Flightgear-devel mailing list
[EMAIL P
Jim Wilson wrote:
> Sent: 23 July 2004 16:01
> To: [EMAIL PROTECTED]
> Subject: [Flightgear-devel] Tried the Spitfire
>
> Very nice! Ok if I borrow the pilot dude for the p51 cockpit?
Please do - but note that he's wearing RAF blue serge trousers (pants :-)),
and 1940's pattern life jacket (
What's that?
Regards,
Ampere
On July 23, 2004 03:43 am, Erik Hofman wrote:
> Sure, now try it in 3d space using WGS84 coordinates ...
>
> Erik
___
Flightgear-devel mailing list
[EMAIL PROTECTED]
http://mail.flightgear.org/mailman/listinfo/flightgear-de
On Fri, 23 Jul 2004 16:07:17 -
"Jim Wilson" <[EMAIL PROTECTED]> wrote:
It has been a while since this feature was added, but I thought Jon
might
like to know that using his VRP feature I've succeeded in positioning
the
Cessna 310 (U-3A) visual model identically under both JSBSim and
YASim
I wrote
> Sent: 23 July 2004 14:39
> To: 'FlightGear developers discussions'
> Subject: RE: [Flightgear-devel] Latest CVS Aborts
>
>
> Frederic Bouvier asked
>
> > Sent: 23 July 2004 13:51
> > To: FlightGear developers discussions
> > Subject: Re: [Flightgear-devel] Latest CVS Aborts
> >
> >
Hi,
This one has me stumped. Downloaded the latest CVS version of OpenAL and did
a build and install..
When compiling SimGear-0.3.6-pre2 get the following error in
../simgear/sound/opena1_test1.cxx
...openal_test1.cxx:113: undefined reference to 'alutLoadWavFile'
...openal_test1.cxx:125: undefin
I'm sorry, but I still don't get it.
Thanks in advance,
Ampere
On July 22, 2004 03:44 am, Erik Hofman wrote:
> Ampere K. Hardraade wrote:
> > Thank you.
> >
> > So, is there anyway to include more than one XML file? The reason I ask
> > is because I have multiple mesh files, and each of them has
I'm new here and am having problems with fgsd on Windows XP Pro. I've got a
copy of AC3D and
want to import an object and place it in fgsd, but it keeps crashing when I
try to load the object. Am I missing a support application, or is there
another issue on Windoz?
Peter
---
Outgoing mail is ce
Hi !
Peter Larson wrote:
I'm new here and am having problems with fgsd on Windows XP Pro. I've got a
copy of AC3D and
want to import an object and place it in fgsd, but it keeps crashing when I
try to load the object. Am I missing a support application, or is there
another issue on Windoz?
Peter
Do
sorry for the delay, but i've been quite busy, here is is
link: http://tristar500.net/modelo3d/L1011-500.zip
the 3d model is still needing fixes, nose will be remade, so i can apply the
windshield texture separetely from the side texture to avoid the stretch
effect.
also slats are not animated
On Friday 23 July 2004 06:12, Dave Perry wrote:
>
> The warnings are explained. by running info as documented and are not an
> issue.
>
> Questions
> 1. Has anyone had a similar problem with SuSe 9.1?
Yes, i did with Slackware 10.0.
> 2. Any ideas how to get past this?
To solve that error just
Dialog scenery_loading not defined
The message only appears when one is in KSFO. As for other airports, the
message doesn't appear; neither does the scenery. All there is is an ocean.
Can anyone duplicate these problems?
Regards,
Ampere
___
Flightg
They go in the Aircraft directory.
Regards,
Ampere
On July 23, 2004 11:58 pm, Jon Berndt wrote:
> Oh, good. I was hoping someone would do an L1011. Where do all these files
> go?
>
> Jon
___
Flightgear-devel mailing list
[EMAIL PROTECTED]
http://mail.f
> sorry for the delay, but i've been quite busy, here is is
>
> link: http://tristar500.net/modelo3d/L1011-500.zip
>
> the 3d model is still needing fixes, nose will be remade, so i can apply the
> windshield texture separetely from the side texture to avoid the stretch
> effect.
> also slats
Boris,
thanks. It appears to be the Crease command. I created a box, removed the
crease and it imported OK (now I have to work through how to save the
scenery so that it gets picked up by the Sim!). As I said, I'm new to this
(as in just the last 4 days) and have no experience with plib.
Is there a
Not sure this is the right forum, I'm getting coloured apostraphe shapes
around 200 pixels high on the screen. They appear to be related to runway
lights. They also appear while the sim is in the air.
I'm running Windows XP Pro with a Radeon 9200SE video card and Gigabyte
GA-7VT600 motherboard. Dri
- Original Message -
From: "John Wojnaroski" <[EMAIL PROTECTED]>
To: "FlightGear developers discussions" <[EMAIL PROTECTED]>
Sent: Friday, July 23, 2004 3:32 PM
Subject: Re: [Flightgear-devel] Latest OpenAL for new build?
> Hi,
>
> This one has me stumped. Downloaded the latest CVS versi
47 matches
Mail list logo