Doug Hardie schrieb:
I am upgrading a server to 6.0 and encountered an error in make
buildworld. However, I don't know what the error was as I piped stdout
to a file, but not stderr. It was fairly near the end so I really hate
to restart from the beginning again. The master server is a
Jon schrieb:
Hello all,
I'm wondering how to get 3D Hardware graphics going
under FreeBSD.
I tried both the LibGL.so that came with the driver
for my graphics card and the default LibGL.so that
came with FreeBSD '/usr/X11R6/lib' but no go, still
slow software mode. I have a DRI radeon enabled
Imran Imtiaz schrieb:
where can i find all the customization options of ther kernel?
See src/sys/conf/NOTES for platform-independent options and for example
src/sys/i386/conf/NOTES for i386-specific options.
Regards
Björn
___
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Danial Thom
Sent: Monday, December 26, 2005 6:28 PM
To: Beech Rintoul; freebsd-questions@freebsd.org
Subject: Re: BSD Question's.
--- Beech Rintoul [EMAIL PROTECTED] wrote:
On Monday 26 December 2005
Does it meet the test I already outlined?
Download the FreeBSD iso then upload it to a remote server,
with both lines connected. Time it.
Disconnect 1 line, then repeat the test. If the time to
download and upload when both DSL lines are connected is
half the time it takes when 1 DSL line is
On 26 Dec Danial Thom wrote:
It doesn't really matter what the accepted standard is; its the one
that *most* people are using.
Bring this rule to society and it won't take all that much time before
we'll live in a jungle (happely ever after ? ;-)
It's the decease of this era that lost of
Since I upgraded from FreeBSD 5.4 to 6.0, I cannot for the life of me get
the wi0-interface to work at all (real bummer).
During boot I get the following error message:
ieee80211_load_module: load the wlan_wep module by hand for now
If afterwards I try to fiddle around with ifconfig wepmode
On 26 Dec Jerry McAllister wrote:
Just put the FreeBSD install CD back in and install the FreeBSD MBR.
It will give you a choice as to which to boot. It works just fine.
It's only quirk is that, if the MS slice is an NTFS type of filesystem
it will identify it as ??? in the menu rather than
On 12/27/05 18:22 Kiffin Gish said the following:
Since I upgraded from FreeBSD 5.4 to 6.0, I cannot for the life of me get
the wi0-interface to work at all (real bummer).
During boot I get the following error message:
ieee80211_load_module: load the wlan_wep module by hand for now
If
I just upgraded my laptop from 512MB to 1024MB memory.
It is said that the /swap partition has to be at least as much as the maximum
available memory, but my current value is still based on the old 512MB size.
Can I increase the size of the existing swap partition or do I have to create a
new
Kiffin Gish schrieb:
I just upgraded my laptop from 512MB to 1024MB memory.
It is said that the /swap partition has to be at least as much as the maximum
available memory, [...]
This is more an ancient rule of thumb. You can even have a working
system without swap at all. Swap will be only
Hey guys.
Basically in my situation I have a broken server in colo with no serial
console. It works for the most part but write access to / is gone, and
all attempts at repair are not coming about.
I'd like to reinstall all but /home (has a seperate slice), however I
would have to do so
On Sun, 25 Dec 2005 09:27 am, Danial Thom wrote:
Schwab Streetsmart
Accounting Software (CA)
Quicken
Photoshop
Adobe Acrobat (for creating PDFs)
Those are the ones I use daily. Surely there are
some half-assed alternatives for some of these,
but if I have to use something inferior to use
=?windows-1252?Q?Bj=F6rn_K=F6nig?= [EMAIL PROTECTED] writes:
Kiffin Gish schrieb:
I just upgraded my laptop from 512MB to 1024MB memory.
It is said that the /swap partition has to be at least as much as
the maximum available memory, [...]
This is more an ancient rule of thumb. You can
On Mon, 26 Dec 2005 01:03 am, Danial Thom wrote:
--- Giorgos Keramidas [EMAIL PROTECTED]
wrote:
On 2005-12-24 14:01, Danial Thom
[EMAIL PROTECTED] wrote:
Don Hinton [EMAIL PROTECTED] wrote:
For me, FreeBSD is about twice as fast/easy
to install/configure,
and infinitely
On 26 Dec Jerry McAllister wrote:
Just put the FreeBSD install CD back in and install the FreeBSD MBR.
It will give you a choice as to which to boot. It works just fine.
It's only quirk is that, if the MS slice is an NTFS type of filesystem
it will identify it as ??? in the menu
On Tuesday 27 December 2005 09:37, Greg 'groggy' Lehey wrote:
On Tuesday, 27 December 2005 at 9:35:07 +0800, Yuan Jue wrote:
hello, all
can projectors be used under FreeBSD?
Yes.
if it could, how?
What's the issue? Plug it in and it should work.
yes, it does work just when I plug
On Tuesday, December 27, 2005 8:35:04 AM
Malcolm Kay [EMAIL PROTECTED]
Subject: Re: BSD Question's.
Wrote these words of wisdom:
I would claim that XP is quite capable of screwing up
its system without any real help from the user.
I installed a HP all-in-one scanner-plotter on my
a NEC
--- dick hoogendijk [EMAIL PROTECTED] wrote:
On 26 Dec Danial Thom wrote:
It doesn't really matter what the accepted
standard is; its the one
that *most* people are using.
Bring this rule to society and it won't take
all that much time before
we'll live in a jungle (happely ever
--- Ted Mittelstaedt [EMAIL PROTECTED]
wrote:
-Original Message-
From: Danial Thom
[mailto:[EMAIL PROTECTED]
Sent: Monday, December 26, 2005 7:50 AM
To: Ted Mittelstaedt; Winelfred G. Pasamba
Cc: [EMAIL PROTECTED];
freebsd-questions@freebsd.org
Subject: RE: FreeBSD router
On 27 Dec Danial Thom wrote:
--- dick hoogendijk [EMAIL PROTECTED] wrote:
On 26 Dec Danial Thom wrote:
It doesn't really matter what the accepted standard is; its the
one that *most* people are using.
Bring this rule to society and it won't take all that much time
before
I have some HTML files with hundreds of URLs that I need to modify using a
search/replace string. I assume that SED(1) is the right tool to use, but
every syntax I've tried has not worked.
Here is what I'm trying to do:
Change full URLs to relative paths, in other words, chop off the
I was reading about the new if_bridge driver, and the ability of any
packet filter to interface with it that uses pfil hooks. But I can't
seem to find any documentation that says whether pf is such a packet
filter? Would someone enlighten me if pf is useable with the new
if_bridge driver?
On Tue, 2005-12-27 at 09:18 -0600, Jack Stone wrote:
I have some HTML files with hundreds of URLs that I need to modify using a
search/replace string. I assume that SED(1) is the right tool to use, but
every syntax I've tried has not worked.
Here is what I'm trying to do:
Change full URLs
--- Malcolm Kay [EMAIL PROTECTED]
wrote:
On Sun, 25 Dec 2005 09:27 am, Danial Thom
wrote:
Schwab Streetsmart
Accounting Software (CA)
Quicken
Photoshop
Adobe Acrobat (for creating PDFs)
Those are the ones I use daily. Surely there
are
some half-assed alternatives for some
--- dick hoogendijk [EMAIL PROTECTED] wrote:
On 27 Dec Danial Thom wrote:
--- dick hoogendijk [EMAIL PROTECTED] wrote:
On 26 Dec Danial Thom wrote:
It doesn't really matter what the
accepted standard is; its the
one that *most* people are using.
Bring this rule to
--- Ted Mittelstaedt [EMAIL PROTECTED]
wrote:
Does it meet the test I already outlined?
Download the FreeBSD iso then upload it to a
remote server,
with both lines connected. Time it.
Disconnect 1 line, then repeat the test. If
the time to
download and upload when both DSL lines
On Tue, Dec 27, 2005 at 09:18:56AM -0600, Jack Stone wrote:
I have some HTML files with hundreds of URLs that I need to modify using a
search/replace string. I assume that SED(1) is the right tool to use, but
every syntax I've tried has not worked.
Here is what I'm trying to do:
Change
Dear FreeBSD-
I'm a FreeBSD 6.0 newbie and very excited.
Could you please by any chance answer the following basic install
Question?
What is the order of installing FreeBSD for a dual-boot XP environment
on a single HDD using GAG
(ie, which do I install first, which partition for each os,
On Tuesday 27 December 2005 06:28, Jon wrote:
I'm wondering how to get 3D Hardware graphics going
under FreeBSD.
I tried both the LibGL.so that came with the driver
for my graphics card and the default LibGL.so that
came with FreeBSD '/usr/X11R6/lib' but no go, still
slow software mode. I
On Tue, 2005-12-27 at 09:18 -0600, Jack Stone wrote:
I have some HTML files with hundreds of URLs that I need to modify using a
search/replace string. I assume that SED(1) is the right tool to use, but
every syntax I've tried has not worked.
Here is what I'm trying to do:
Change full URLs
On Tue, 27 Dec 2005 10:13:30 -0600
Daniel Goldberg [EMAIL PROTECTED] wrote:
Dear FreeBSD-
I'm a FreeBSD 6.0 newbie and very excited.
Could you please by any chance answer the following basic install
Question?
What is the order of installing FreeBSD for a dual-boot XP environment
Jonathan Chen wrote:
On Fri, Dec 23, 2005 at 12:15:11PM -0500, DW wrote:
[...]
I do all this on my new 6.0 machine. When I hit the sync button on zire,
I get the expected dmesg output (detecting the palm device), but there
is no /dev/ucom0 device in /dev. Why?
Aside from adding
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Daniel Goldberg
Sent: Tuesday, December 27, 2005 8:14 AM
To: freebsd-questions@FreeBSD.org
Subject: Quick Install Question
Dear FreeBSD-
I'm a FreeBSD 6.0 newbie and very excited.
Yes I have. I also added it to the loader.conf file, the kernel
configuration file, done a buildkernel etc. but no luck.
# /boot/loader.conf
wlan_wep_load=YES
# /usr/src/sys/i386/conf/GENERIC
device wlan_wep
But still no luck. What am I forgetting?
At about the time of 12/26/2005 5:45 PM, [EMAIL PROTECTED] stated the
following:
I am trying to back up the drive I have been using (which is now full)
onto a 60GB Seagate IDE drive - ST360020A. After a bunch of failures at
configuring the disk, I did some searching on the web and found some
You might want to check out ethercons, but you'll probably have to roll
your own boot CD with this included.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Elliot
Crosby-McCullough
Sent: Tuesday, December 27, 2005 07:13
To: freebsd-questions@freebsd.org
On Tuesday, December 27, 2005 11:39:04 AM
Andrew L. Gould [EMAIL PROTECTED]
Subject: Re: Quick Install Question
Wrote these words of wisdom:
On Tue, 27 Dec 2005 10:13:30 -0600
Daniel Goldberg [EMAIL PROTECTED] wrote:
Dear FreeBSD-
[..]
1. Install Windows first, in the first
+++ [EMAIL PROTECTED] [freebsd] [26-12-05 16:15 -0200]:
| Hi Nicolas,
|
| I forget to say that I'm using Gnome, does k3b work with it?
Yes. KDE libraries will be installed.
--
pgp1hNi1iCyyY.pgp
Description: PGP signature
Hello
Im wondering how to tell freeBSD about my 2 dvd drives. k3b
automatically detects them but it hasnt found either.
Thanks
Eoghan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Hi all,
My system (FBSD 5.4, Xorg, Gnome2), started to show the following
message.
/libexec/ld-elf.so.1: Shared object libexif.so.10 not found, required by
nautilus
I indeed, could not find libexif.so.10.
How can I fix that?
- Thank you
--- Danial Thom [EMAIL PROTECTED] wrote:
--- Ted Mittelstaedt [EMAIL PROTECTED]
wrote:
Does it meet the test I already outlined?
Download the FreeBSD iso then upload it to a
remote server,
with both lines connected. Time it.
Disconnect 1 line, then repeat the test.
On Tue, 27 Dec 2005 13:21:26 -0500
Gerard Seibert [EMAIL PROTECTED] wrote:
On Tuesday, December 27, 2005 11:39:04 AM
Andrew L. Gould [EMAIL PROTECTED]
Subject: Re: Quick Install Question
Wrote these words of wisdom:
On Tue, 27 Dec 2005 10:13:30 -0600
Daniel Goldberg [EMAIL PROTECTED]
Hi,
I compiled Firefox 1.5 from ports but when attempting to start it I get
the error message:
Firefox is already running, but is not responding. To open a new
window, you must first close the existing Firefox process, or restart
your system.
I could not find any Firefox or Mozilla type of
On 12/27/05, Rob [EMAIL PROTECTED] wrote:
Hi,
I compiled Firefox 1.5 from ports but when attempting to start it I get
the error message:
Firefox is already running, but is not responding. To open a new
window, you must first close the existing Firefox process, or restart
your system.
I
Imran Imtiaz [EMAIL PROTECTED] writes:
how can i make my dlink DWL-G122 wireless usb adapter work with freebsd?
IIRC it's supported by the ural driver. With that knowledge and the
wireless networking chapter in the Handbook, you should be fine.
--
Peter N. M. Hansteen, member of the first
On Tuesday, December 27, 2005 1:42:54 PM
Andrew L. Gould [EMAIL PROTECTED]
Subject: Re: Quick Install Question
Wrote these words of wisdom:
Is the WinXP partition in the same computer that is running FreeBSD? Or
is the NTFS partition a shared directory on a separate WinXP computer?
(I was
On Saturday, December 24, 2005 2:23:28 PM
Gerard Seibert [EMAIL PROTECTED]
Subject: Using Sendmail to add headers to mail
Wrote these words of wisdom:
I am not sure if this is possible or not. Is it possible to add custom
'X-' headers to mail using Sendmail? For instance, suppose I wanted to
Is there any way to fully automate the upgrade of all installed ports?
Typically ncurses screens prompt for compile options. Is there any way to
instruct portupgrade to use default compile values?
--
Peter
My ports-supfile is:
*default host=cvsup.nl.FreeBSD.org
*default base=/var/db
*default prefix=/usr
*default release=cvs tag=.
*default delete use-rel-suffix
*default compress
ports-all
i do:
cvsup -g -z -L 2 /etc/ports-supfile
and get this:
Updating collection ports-all/cvs
Cannot
ms# uname -a
FreeBSD ms.gltcall.com 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov 3
09:36:13 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
i386
ms#
ms# cat /etc/ports-supfile
*default host=cvsup.nl.FreeBSD.org
*default base=/var/db
*default prefix=/usr
*default
Tofik Suleymanov píše v út 27. 12. 2005 v 22:24 +:
My ports-supfile is:
*default host=cvsup.nl.FreeBSD.org
*default base=/var/db
*default prefix=/usr
*default release=cvs tag=.
*default delete use-rel-suffix
*default compress
ports-all
i do:
cvsup -g -z -L 2 /etc/ports-supfile
On Tue, Dec 27, 2005 at 03:20:07PM -0500, Peter wrote:
Is there any way to fully automate the upgrade of all installed ports?
Typically ncurses screens prompt for compile options. Is there any way to
instruct portupgrade to use default compile values?
Add a `BATCH=yes' to /etc/make.conf.
--
[EMAIL PROTECTED] schrieb:
Hi all,
My system (FBSD 5.4, Xorg, Gnome2), started to show the following
message.
/libexec/ld-elf.so.1: Shared object libexif.so.10 not found, required
by nautilus
I indeed, could not find libexif.so.10.
How can I fix that?
There are several ways
Hello?!
I have a scanner that is on the list at sane and it is connected to ppc0
which I belive is the first parallelport.
Anyone got a scanner attached to ppc0 to funktion? How?
Scanner:
Primax 4800 Direct
Driver:
plustek_pp
OS:
FreeBSD 5.4
--
NB. This is NOT a life supporting
In all the searches I've done about upgrade from a Rel4.x to Rel6. all
the info seems to center on using cvsup and port upgrade, and using
Rel5 is an intermediate step to get to Rel6.
Maybe I just like pain, but are there any instructions for 'manually'
upgrading from 'most any prior freebsd' to
I have an old (very old) ASUS P5 motherboard running FreeBSD 5.4.
The boot disk is a 40MB Western Digital WD400 IDE drive jumpered to
only use 32MB so it can be booted from since the BIOS in this PC
(the latest and greatest) can't deal with anything larger than 32MB.
This PC is working well for
Bernt Hansson wrote:
Hello?!
I have a scanner that is on the list at sane and it is connected to ppc0
which I belive is the first parallelport.
Anyone got a scanner attached to ppc0 to funktion? How?
Scanner:
Primax 4800 Direct
Driver:
plustek_pp
OS:
FreeBSD 5.4
The last time I
Gerard Seibert wrote:
On 10/11/2005 5:29:42 PM, Gerard Replied:
Actually, there are three computers. One is running FreeBSD 5.4 and the
other two have WinXP Pro installed. I networked all three together. The
WinXP systems are using the NTFS format. Samba can read and write to
both of the WinXP
Good morning !
Sorry for my bad English. I'm write from Russia. I have some problem
with installing FreeBSD 6 amd64 ! You my last chance ! No one dont
give me a answer for my question.
I put CD to cdrom and after some second I press 1 to install default
settings. After some second I see that
Hello all,
I'm wondering how to get 3D Hardware graphics going
under FreeBSD.
I tried both the LibGL.so that came with the driver
for my graphics card and the default LibGL.so that
came with FreeBSD '/usr/X11R6/lib' but no go, still
slow software mode. I have a DRI radeon enabled
driver
On Tue, 27 Dec 2005 10:13:30 -0600
Daniel Goldberg [EMAIL PROTECTED] wrote:
What is the order of installing FreeBSD for a dual-boot XP environment
on a single HDD using GAG
(ie, which do I install first, which partition for each os, is there a
resource for this answer published somewhere
On Tue, 27 Dec 2005, martinko wrote:
also, could other submitted designs be seen somewhere? (at least top 5
of them)
I'd like to see them as well. I suppose, if bold enough, one could
mail the authors found at http://logo-contest.freebsd.org/result/ .
I've come to belive that this
Micah wrote:
Bernt Hansson wrote:
Hello?!
I have a scanner that is on the list at sane and it is connected to
ppc0 which I belive is the first parallelport.
Anyone got a scanner attached to ppc0 to funktion? How?
Scanner:
Primax 4800 Direct
Driver:
plustek_pp
OS:
FreeBSD 5.4
The last
I'm getting segment faults on all 3 of my webservers. I upgraded all of my
packages thinking that would fix the offending program; however, php is
throwing segment faults. For example, when trying to INSTALL pear_DB. I
get seg faults when updating
# cd /usr/ports/databases/pear-DB
# make
On Wed, 28 Dec 2005, [EMAIL PROTECTED] wrote:
I have some problem with installing FreeBSD 6 amd64 !
...
I put CD to cdrom and after some second I press 1 to install default
settings. After some second I see that
...
Vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on
On Wed, 28 Dec 2005 02:15 am, Danial Thom wrote:
--- Malcolm Kay [EMAIL PROTECTED]
wrote:
On Sun, 25 Dec 2005 09:27 am, Danial Thom
wrote:
Schwab Streetsmart
Accounting Software (CA)
Quicken
Photoshop
Adobe Acrobat (for creating PDFs)
Those are the ones I use daily.
Quoting Danial Thom [EMAIL PROTECTED]:
--- Ted Mittelstaedt [EMAIL PROTECTED]
wrote:
-Original Message-
From: Danial Thom
[mailto:[EMAIL PROTECTED]
Sent: Monday, December 26, 2005 7:50 AM
To: Ted Mittelstaedt; Winelfred G. Pasamba
Cc: [EMAIL PROTECTED];
Quoting Danial Thom [EMAIL PROTECTED]:
--- Ted Mittelstaedt [EMAIL PROTECTED]
wrote:
Does it meet the test I already outlined?
Download the FreeBSD iso then upload it to a
remote server,
with both lines connected. Time it.
Disconnect 1 line, then repeat the test. If
On 2005-12-26 23:49, Doug Hardie [EMAIL PROTECTED] wrote:
I am upgrading a server to 6.0 and encountered an error in make
buildworld. However, I don't know what the error was as I piped
stdout to a file, but not stderr.
I usually keep them both, with something like:
# cd /usr/src/
#
Two part question here ... first leads into the second, and the second
might answer the first ...
1. What variables on a server should be monitored to determine how busy a
server is? For instance, I've always been taugth that 'loadavg' is not an
indication of how busy a server is, since a
boot_osflags0,0
leads to:
Unrecognized boot flag '0'.
Unrecognized boot flag ','.
Unrecognized boot flag '0'.
NetBSD/alpha uses
s single-user mode bootstrap.
a (automatic) multi-user mode bootstrap.
although FreeBSD may well use different flags.
I
On 2005-12-27 15:05, David Bear [EMAIL PROTECTED] wrote:
In all the searches I've done about upgrade from a Rel4.x to Rel6. all
the info seems to center on using cvsup and port upgrade, and using
Rel5 is an intermediate step to get to Rel6.
That's right. It should always be possible to use
On Tuesday 27 December 2005 00:12, Giorgos Keramidas wrote:
On 2005-12-26 11:07, Yuan Jue [EMAIL PROTECTED] wrote:
instead, I figure out another way to work around.
1.ifconfig bge0 delete
% this would shut my local NIC down totally
2.kldload if_ath
dhclient ath0
then I can
On 25 Dec 2005 at 2:59, Ariff Abdullah wrote:
On Sat, 24 Dec 2005 12:37:56 -0500
Dan Langille [EMAIL PROTECTED] wrote:
Gidday folks,
I have an IPv6 routing problem within my LAN behind the gateway.
I have an IPv6 tunnel supplied by Hurricane Electric. The tunnel is
setup and
On 2005-12-27 18:13, Kiffin Gish [EMAIL PROTECTED] wrote:
Yes I have. I also added it to the loader.conf file, the kernel
configuration file, done a buildkernel etc. but no luck.
# /boot/loader.conf
wlan_wep_load=YES
# /usr/src/sys/i386/conf/GENERIC
device wlan_wep
I think this is why
Quoting Danial Thom [EMAIL PROTECTED]:
--- Danial Thom [EMAIL PROTECTED] wrote:
--- Ted Mittelstaedt [EMAIL PROTECTED]
wrote:
Does it meet the test I already outlined?
Download the FreeBSD iso then upload it to a
remote server,
with both lines connected.
Marc G. Fournier wrote:
1. What variables on a server should be monitored to determine how busy
a server is? For instance, I've always been taugth that 'loadavg' is
not an indication of how busy a server is, since a high loadavg on a
single CPU server might be an overloaded server, but
Imran Imtiaz wrote:
I am getting the following messages again and again, why it is accuring and how
can I correct and track it?
Dec 27 00:48:00 darkstar kernel: kern.ipc.maxpipekva exceeded; see tuning(7)
You might look at ps or top for lots of stuck processes generated by something
which
Imran Imtiaz wrote:
actually i am running some graph generating scripts this is because of
them but it doesn't happened all the time so how can i correct it ?
Adjust or serialize your scripts, or recompile the kernel with more KVA
allocated to pipes. See the Handbook about rebuilding the
I don't see Sendmail X available as a port or package. I'm interested in trying
this version because it's the first to eliminate the horribly cryptic system of
m4 macros, classes, and address parsing rules that configured earlier
versions.
Is there a reason why it's not available as a package or
Hi Brent,
The BSD tar that is in FreeBSD cannot span tapes, you have to
use gtar. (GNU tar) the old original tar in FreeBSD was gtar,
then they renamed tar to gtar, and added in a BSD tar (that
is unencumbered code)
man gtar should tell all you need.
Also a note on your 8MM, 14gb
hello, all
I wanna delete a package that I don't want now. I know that when I use
portinstall -R xxx to install it, many dependencies have been installed too.
Now I wanna delete them all if they are not used by any other packages.
how can I do it? can I pkg_delete -r xxx?
thanks.
--
Best
On Wed, 2005-12-28 at 13:55 +0800, Yuan Jue wrote:
hello, all
I wanna delete a package that I don't want now. I know that when I use
portinstall -R xxx to install it, many dependencies have been installed too.
Now I wanna delete them all if they are not used by any other packages.
how
On Wednesday 28 December 2005 14:00, Dmitry Sidorov wrote:
On Wed, 2005-12-28 at 13:55 +0800, Yuan Jue wrote:
hello, all
I wanna delete a package that I don't want now. I know that when I use
portinstall -R xxx to install it, many dependencies have been installed
too. Now I wanna delete
On Tuesday 27 December 2005 22:10, Yuan Jue wrote:
On Wednesday 28 December 2005 14:00, Dmitry Sidorov wrote:
On Wed, 2005-12-28 at 13:55 +0800, Yuan Jue wrote:
hello, all
I wanna delete a package that I don't want now. I know that when I use
portinstall -R xxx to install it, many
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Malcolm Kay
Sent: Tuesday, December 27, 2005 3:55 PM
To: [EMAIL PROTECTED]
Cc: rod person; freebsd-questions@freebsd.org
Subject: Re: BSD Question's.
Cadence have a wide range of products some of which
run
On Tue, Dec 27, 2005 at 11:58:00AM -0500, DW wrote:
I then type:
# pilot-xfer -p /dev/cuaU0 -b backup
and I get:
Listening to port: /dev/cuaU0
Please press teh HotSync button now
Works fine for me with Palm TE2. You need press HotSync button and wait
a little.
On Tue, 2005-12-27 at 19:18, Gerard Seibert wrote:
On Tuesday, December 27, 2005 1:42:54 PM
Andrew L. Gould [EMAIL PROTECTED]
Subject: Re: Quick Install Question
Wrote these words of wisdom:
Is the WinXP partition in the same computer that is running FreeBSD? Or
is the NTFS
On Monday 26 December 2005 01:09, Eric Kjeldergaard wrote:
On Monday 26 December 2005 01:35, Yuan Jue wrote:
On Monday 26 December 2005 00:15, you wrote:
On Monday 26 December 2005 00:54, Yuan Jue wrote:
hello, all
is there any software that like Rainlender on Windows? I need to
On Tue, 2005-12-27 at 22:12, Robert Ames wrote:
I have an old (very old) ASUS P5 motherboard running FreeBSD 5.4.
The boot disk is a 40MB Western Digital WD400 IDE drive jumpered to
only use 32MB so it can be booted from since the BIOS in this PC
(the latest and greatest) can't deal with
I am running ProFTPD 1.2.10 on my bsd server but the problem is that if a user
don't have a shell and I've defined his shell as nologin then the ftp server
does not logon and give the following error
C:\Documents and Settings\Asifftp 192.168.0.3
Connected to 192.168.0.3.
220 ProFTPD 1.2.10
On Wednesday 28 December 2005 14:21, Michael C. Shultz wrote:
On Tuesday 27 December 2005 22:10, Yuan Jue wrote:
On Wednesday 28 December 2005 14:00, Dmitry Sidorov wrote:
On Wed, 2005-12-28 at 13:55 +0800, Yuan Jue wrote:
hello, all
I wanna delete a package that I don't want
Dear lists;
I tried to do network auto configuration by DHCP with integrated Intel
Pro Wireless 2100 wlan device (ipw2100).
I have trouble when load firmware with ipwcontrol on boot.
Initialitation script (/usr/local/etc/rc.d/ipw.sh) always execute after
network init (specify in rc.conf).
Is
94 matches
Mail list logo