I assume you have compiled the bootblocks as per the instruction in the
handbook.
Second, do you have more than one serial port on the box because FreeBSD can
only work its serial console magic on only one port at a time.
If you redirect your IPMI serial console or just a normal serial
to indicate this very clearly but well, now that
it's working, I'm a happy man.
ihsan
On Jun 13, 2012, at 5:53 AM, Ihsan Junaidi Ibrahim wrote:
Folks,
I'm hitting a roadblock on getting IPMI SoL up and running on my Supermicro
box. It's a X9SCL-F with a dedicated IPMI LAN.
I've installed
Folks,
I'm hitting a roadblock on getting IPMI SoL up and running on my Supermicro
box. It's a X9SCL-F with a dedicated IPMI LAN.
I've installed ipmitool and set the necessary console redirects (COM1, COM2 and
SoL) in the BIOS. The new AMI BIOS does not seem to indicate the SoL is sharing
Hi,
I need to build a system that need to terminate a number of 6-in-4 and 4-in-4
tunnels.
Can someone point me to a direction, with gif auto-cloning and on GENERIC, what
is the maximum number of gif interfaces/tunnels that can be supported?
I'm on 8.2.
Thanks in
a cosmetic issue and I can just remove those binaries
manually or if not so, is there a special configs needed to remove
them.
Apologize if this question has been asked before.
--
Thank you for your time,
Ihsan Junaidi Ibrahim
___
freebsd-questions
). Since your
apache is running as user www, that should explain why the
authentication failed.
The only workaround is to have your apache runs as root or use a
different authentication back-end.
--
Thank you for your time,
Ihsan Junaidi Ibrahim,
http://ihsan.synthexp.net
Ihsan Junaidi Ibrahim wrote:
I've encountered the problem as well and have lived without it since; if
I recalled correctly from a previous reply on this list, pam_unix.so
uses getpwnam () to fetch the password information. It will only return
the password if the calling process has an UID of 0
i all,
Is there any technical reason why quota support is not included in GENERIC
kernel or at least be made a loadable module? I know it's not hard to recompile
the kernel but why the hassle of doing that when a module or built-in feature
can be included?
I would like to utilize
Hi all,
Is there any technical reason why quota support is not included in GENERIC
kernel or at least be made a loadable module? I know it's not hard to recompile
the kernel but why the hassle of doing that when a module or built-in feature
can be included?
I would like to utilize
Hi all,
I was equally stumped by the problem as well. After trying so many solutions,
for some reasons, which I'm not too sure was when I asked my ISP to increase the
TTL information from 1 hour (1H) to 1 day (1D), it immediately worked. I no
longer have problems sending mails to this list
Matthew Seaman wrote:
Since you aren't allowing your users to log into your FreeBSD server
the question arises as to why exactly they need passwords there? Two
things leap to mind immediately: access to shared filesystems or
access to an e-mail server.
It's an e-mail server. Previously I set it
Volker Kindermann wrote:
what about giving them /usr/bin/passwd as the shell? So, the only thing
they have to do is ssh to the system and they're asked for the password.
Haven't tried this on FreeBSD yet, but it should work.
Did a cursory testing just now and they seem to work. I'm going to
Hi all,
I'm somehow stuck in the loop now and am hoping some of you can give me
pointers on how to proceed. Due to a customer requirement, I need to
build a simple web-based (via cgi or php) script to change the system
password. They found that sshing to the server and typing passwd to
change
On Thu, 03 Jun 2004 21:48:22 +0200, David Telyas wrote:
I have an i386 running FreeBSD 5.2.1 and KDE, but I can't get my printer
working. It's a HP Deskjet 5550 connected via USB. I've heard about lpd
and cups, but don't know which one to use or what the difference is. So
can anyone guide a
Hello all,
Ever since I upgraded to KDE 3.1 and all the relevant packages and ports,
I've been unable to use Mozilla. It will not even start. Here's the error
message.
---
No running window found.
(process:1119): GLib-GObject-CRITICAL **:
On Friday 14 February 2003 08:31, Ihsan Junaidi Ibrahim wrote:
Hello all,
Ever since I upgraded to KDE 3.1 and all the relevant packages and ports,
I've been unable to use Mozilla. It will not even start. Here's the error
message.
I'm using Mozilla 1.2.1. I've used 1.2.1 before
Hello all,
I just bought an 80 GB drive and would like move /usr partition to the new
disk. I have a dedicated partition /da0s1f that is currently dedicated to it.
/var partition resides in da0s1e.
How do delete the slice that is occupying /usr and use that free space to
extend /var? I read
Hello all,
I cvsup'ed my source early today and modified OpenSSH and OpenSSL to point to
the ports collection. I modified make.conf to reflect my changes
OPENSSH_OVERWRITE_BASE = true
OPENSSL_OVERWRITE_BASE = true
AND
NO_OPENSSH = true
NO_OPENSSL = true
The OpenSSH came from
On Thursday 06 February 2003 02:53, Kris Kennaway wrote:
On Thu, Feb 06, 2003 at 02:38:34AM +0800, Ihsan Junaidi Ibrahim wrote:
Hello all,
I cvsup'ed my source early today and modified OpenSSH and OpenSSL to
point to the ports collection. I modified make.conf to reflect my changes
You
On Thursday 06 February 2003 02:38, Ihsan Junaidi Ibrahim wrote:
Hello all,
I cvsup'ed my source early today and modified OpenSSH and OpenSSL to point
to the ports collection. I modified make.conf to reflect my changes
OPENSSH_OVERWRITE_BASE = true
OPENSSL_OVERWRITE_BASE = true
Hello all,
It seems that every time I saved a file, emacs will create a backup of
the previous copy and tack a ~(tilde) at the end of the filename. I find
it annoying to have such feature, how do I turn it off? I'm using
xemacs21
Thanks in advance.
Hello all,
I'm building a small workgroup (10 PCs) which will be used for software and
network testing as well for day-to-day usage. We're also conducting small
classes teaching UNIX for school students in our area. Therefore I'm looking
for a good integrated Athlon chipset which are
Hello all,
I'm running KDE under a normal user and I couldn't seem to get some group of
kcontrol to work properly. Whenever I need to adjust some settings such as
Font Installer, Login Manager which requires root access (which I have), the
Loading screen just stood there actionless
On Monday 13 January 2003 04:28, Adam Maas wrote:
The nForce based boards would be your best bet. Good solid chipset with a
decent video core. You should be able to find one that's less expensive
than the Asus. Perhaps an MSI or Gigabyte.
Gigabyte doesn't make nForce.
I'm keen on the MSI but
Hello all,
How do I put in the GRUB's menu.lst, 2 different kernels, say /kernel and
/kernel.old? I can't seem to boot /kernel.old using loader. How can I allow
configure loader to boot the kernel not specified in loader.conf? It helps if
I can have loader do the job for me
Hello all,
I've installed Postfix MTA on my machine and I'm have a few questions
pertinent to it.
I've setup named on this machine which I configure in 10 subdomains under a
domain, trigger.lan which is the hostname of my machine. I've put MX
configuration to point to a CNAME under
Hello all,
I'm a starter to programming in FreeBSD after a few years in Visual C++ and
would like to delve deeper into it. But I have a few questions which I need
answers. I hope it wouldn't be too much a burden to you.
I have two gccs installed, 2.95.4 (stock gcc) and 3.1.1.
1) How do add
Hello all,
1) Where can I find GLUT on the ports
2) Are there multiple versions of GLUT serving the DRI and MESA?
Thanks in advance
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
To Unsubscribe:
Hello all,
My disk is getting full and I'm thinking of getting bigger and faster disk to
accomodate my installation. I do not want to do reinstallation and prefer to
export previous settings in the present disk. There's too many of them that I
have to customize and I hate to redo it all. The
Hello all,
I have an apache manual directory located in /usr/local/share/doc/apache2
which I'm trying to link from my local website. I symlink the folder to a
local folder in my home directory and all I'm getting is directory index
forbidden by rule when I looked inside the log file. The
Hello all,
I'm using mbmon 2.00 (not available in the ports yet) and I'm getting mixed
results partnering it with a Tyan Tiger MPX 2466-4M with 2 Athlon MP 1800+.
The kernel does not support neither one of the Winbond chips (W83627HF
W83782D) used on this board hence the use of mbmon.
mbmon
and set kernel,
if possible I want to use loader because I've done a few customizations in
loader.conf which I don't know how to make it out without using a loader.
Thanks in advance.
--
Thank you for your time,
Ihsan Junaidi Ibrahim
__
Do You
Hello all,
Saturday, September 28, 2002, 5:49:52 AM, freebsd-questions wrote:
Hello all,
I finally found the cause of the problem. PHP 4.2.3. I commented the
LoadModule and AddModule clauses in httpd.conf and bam!, all CGIs and Perls
work as healthy as they can be.
Hello all,
Unix wrote:
Is your apache server doing virtual hosting
Could you provide me your httpd.conf file
OK, here's the file plus the offending virtual hosts. These are the two hosts
that use the cgi-bin. Yes I use virtual hosting. I do a local lan-based sites
using local name
Hello all,
Weird problem I'm having here. I can't execute any script in ScriptAlias
directory. 500 Internal Server Error always came out. I'm pretty sure the
scripts are all right. I ran them on shell, they executed well. Could it be
that Apache lost the path?
Hello all,
Thursday, September 26, 2002, 9:02:45 AM, freebsd-questions wrote:
I think the problem may be with your scripts. Make sure the scripts
are sending the correct HTTP headers to Apache before trying to print
any output. For example:
#!/usr/bin/perl
print Content-type:
Hello all,
Personally, the only time I've ever seen error 500 is when either the
script had syntax errors, the permissions were set incorrectly, or the
script was transferred as a binary file when it should've been
transferred as ASCII. If you're sure that all three of those issues
don't
Hello all,
I originally posted this topic under How do i know a disk is bad thread but
didn't get any replies.
Well I've narrowed down the problem towards disk quotas. It turns out that when
I disable quotas, everything works fine. When I first setup quotas on /home, I
did not place
Hello all,
Sunday, September 22, 2002, 5:59:30 PM, freebsd-questions wrote:
K, what is it exactly that you DO want? you already installed FreeBSD
4.6.2. you've discovered that RELENG_4_6_2 doesn't exist. you don't want
-STABLE. do you want 4.6 with security patches? then use tag=RELENG_4_6.
Hello all,
Thanks Matthew, it works now. I no longer have the hangup in apache and
file operations. But I'm still stumped on why it happened, since I'm pretty
sure I followed all the guidelines.
Thanks again.
--
Thank you for your time,
Ihsan
messages.
Thanks in advance.
--
Thank you for your time,
Ihsan Junaidi Ibrahim
__
Do you Yahoo!?
New DSL Internet Access from SBC Yahoo!
http://sbc.yahoo.com
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions
41 matches
Mail list logo
