Hey everyone. Below is my natd.conf file and my rc.firewall.rule file. I
cannot figure it out, but if one of my machines that is behind my
Masqurading Firewall tries to d/l a file that is on a FTP site, it fails
to connect.
FreeBSD 5.2.1 machine with 2 nics.
xl0 outside Nic
fxp0 inside Nic
[snip]
Ok, I jumped earlier, but actually re-RTF ruleset, I've got a couple
questions:
- Is it only one pc that can't get through?
- Do other services work from behind NAT? (http etc)
It looks like rule 4109 should be BEFORE 4090, as 4090 denies all traffic
and stops, and internal traffic
Hey all,
I have a rather stupid question... I currently have an old Compaq
DP6000 6266mmx box running as one of my test servers. The default
boot option is Non-ACPI (running FreeBSD 5.1). If I just let the
loader screen come up (The one with the little ascii devil) and not
do anything, the
What can I modify to make
the machine Automatically select option # 2 during the boot process?
Check out your /boot/loader.conf file.
Comment out the hint.acpi.0.disabled=1 if it's in there.
I don't know for sure that this will work, but I'd try it.
my /boot/loader.conf file is empty.
I install F-Prot from the ports. If I run check-updates.pl from the
console I get a sucessful update everytime (or a nothing updates found
message) but if I added the script into the crontab (via crontab -e as
root) I get the following Email:
***
* F-Prot
Hey all,
I have looked into this before but never really found too much info on
it. On one of my FreeBSD boxes I run Squirrelmail. I was told that
there is a Imap Proxy server that can be ran on the local box to help
with some slowness with accessing email. I have installed the Imap
Proxy
I am running bind 9.x on my primary and secondary servers. Since both are
on the same C class subnet I have used a free DNS hosting to be a
secondary for my site.. I am trying to added NS and A name records to the
2 name servers but I recieve errors when I restart/reload bind. Here is
my
I am tring to install mrtg on my test FreeBSD 5.1 box. I change into my
/usr/ports/net/mrtg directory and find that there is only a README.html
How can I get this port back? I tried to cvsup it with ports-all but the
files are not there. What would be a quick solution to get the files?
I have seen lots of pages on google on how to setup Squid as a Transparent
Proxy server on FreeBSD. However most of these refer to 4.9 stable, using
IPTables. I am currently using natd and ipfw. Here are my Firewall rules
rc.firewall.rules
proxy# cat rc.firewall.rules
# be quiet and flush all
etiquetteetiquette
http://www.google.com/search?q=rfc+top+postingsourceid=mozilla-searchstart=0start=0ie=utf-8oe=utf-8
Wow, almost every single reply to the list today was top posted.
People, please know (and you must, you have to read them, too)
that posting replies to the top of an email
Hi list, I've this network configuration:
router (169.158.120.177)
server1 (169.158.120.178) running bind (named), tacacs+, exim, and a pop3
server
server2 (169.158.120.179) running squid, apache2, mysql, proftpd (is
acting
as a GATEWAY)
I've a LAN (192.168.1.0/24) and a breaking apart
trying to install gd and I get this error:
/usr/local/include/freetype2/freetype/freetype.h:20:2: #error
`ft2build.h' hasn't been included yet!
/usr/local/include/freetype2/freetype/freetype.h:21:2: #error Please
always use macros to include FreeType header files.
Read /usr/ports/CHANGES -- you need to update the print/freetype2 port
before you update graphics/gd. Also a good thing to do if you
experience problems with compiling ports is to try cvsup(1)ing again,
and see if the error persists.
Cheers,
Matthew
Thanks Matthew, After i
This is probably a stupid question. I have been having problems correctly
installing qmail-scanner-1.21 on my test webmail servers. I get this
error:
Testing suid nature of /usr/bin/perl...
Whoa - broken perl install found.
Cannot even run a simple script setuid
Installation of Qmail-Scanner
I have IPFW setup, and in my ruleset i have the following line
add 04009 allot tcp from any to me dst port 80 in via x10 setup
add 04010 allow tcp from any to me dst port 25 in via xl0 setup
however if I enable the firewall and try to telnet into port 25, it cannot
connect.. BUT if I disable
[snip]
You do have a rule for established connections?
Kevin Kinsey
DaleCo S.P.
you know the only rule i have for that is
add 6 deny log tcp from any to any established
I am assuming this is incorrect?
___
[EMAIL PROTECTED] mailing list
Aye, there's the rub. Last rule is usually
deny ip from any to any; somewhere above
that, but after the setup rules is allow ip from
any to my.ip.add.ress established* ... it does
no good to allow the setup packets but no
further data
Kevin Kinsey
DaleCo S.P.
*instead of allow ip
I have a IDE cd-burner in my FreeBSD 5.1 box. I have installed cdrecord
from the ports but this looks like it needs a SCSI drive. Is there a CMD
line cd-record package that works with a IDE cd-burner. Here is a line
from dmesg:
acd0: CD-RW MEMOREX CD-RW4224 at ata1-master PIO4
uname -a:
This is a question for anyone running 5.2.1..
I currently have 5.1 running on a Test server, I decieded to try ver
5.2.1. However after I did the
Make Buildworld
Make Buildkernel
Make installkernel
reboot
commands, the machine would no longer boot up to a login prompt. It would
get as far
Running FreeBSD 5.1, I Just ran CVSUP on my ports to bring them current.
When I try to install Squirrelmail from /usr/ports/mail/squirrelmail I get
the following error:
SquirrelMail is installed into /usr/local/www/squirrelmail
To use the old location /usr/local/squirrelmail define
Delete /usr/ports/distfiles/squirrelmail-1.4.2.tar.bz2, and try again.
The file you have by that name has been corrupted somehow and the
ports system is not happy with it. I just checked, and the tarball I
downloaded from sourceforge is identical to the one I used the last
time I updated
Delete /usr/ports/distfiles/squirrelmail-1.4.2.tar.bz2, and try again.
The file you have by that name has been corrupted somehow and the ports
system is not happy with it. I just checked, and the tarball I
downloaded from sourceforge is identical to the one I used the last time
I updated
make clean is the most thorough procedure-- it will also clean
dependencies of the current port-- or you could simply delete the work
subdirectory...
--
-Chuck
After running a make clean and removing the file from /usr/ports/distfiles
It still downloads the file and shows it as being
Has anyone gotten RIMPS 3b3 working on FreeBSD 5.1, running APACHE2, PHP4,
MYSQL4, Perl 5.8? If you have, can you stream audio to a machine running
IE6?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Hey All,
By now I have posted alot of questions and you are probably getting
tired of seeing my name in your inbox... But I have yet another for
you. I am currently running FreeBSD 5.1-Current, I have SquirrelMail
1.4.2 and Courier Imap installed. I installed a plugin for
SquirrelMail that
I cannot seem to get SpamAssassin working with MySQL 4 I have setup
the MySQL database, have given a saconfig user full access to this
database. But SA does not seem to Query the SQL database. I have a
SquirrelMail plugin that connects to the DataBase just fine, and writes
data to it, but
Original Message
Subject: Re: APC Smart-UPS 620VA
From:[EMAIL PROTECTED]
Date:Mon, November 3, 2003 11:04 pm
To: Matthew Seaman [EMAIL PROTECTED]
--
A
Hi all,
I have a AMD ThunderBird 1 gig machine on a Abit KT7A-Raid MB. When I
install my Adaptec 29160N Ultra 160 scsi card, and try to do any
writing to a DDS2 tape drive, I get a screen full of Ahc0 - Parity
error then I get another error stating that the card is *Reporting*
the errors and
The controller is complaining that some device in your system is
generating
PCI transactions that cannot be safely decoded because they contain parity
errors. Just moving the 160 card won't make this situation go away. You
need to find the source of these errors. Otherwise, you might as
here are the errors from the messages log. This ONLY happened when A) a
device was connected to the Adaptec 29160N and B) when the device was
being used by dump. According the the replies I am afraid the problem may
be related to the MB.. And ideas on how to trouble shoot it? For some
reason
In the last episode (Oct 30), Ronnie Clark said:
Thanks all for the suggestions. I have the port installed, but how
doDaemoncontrol
I configure this beast to work with OpenView? I have looked at the
online docs for the port, but it is all jibberish to this newbie.
Anyone have a simple to
daily_clean_hoststat_enable=NO
daily_status_mail_rejects_enable=NO
daily_status_include_submit_mailq=NO
daily_submit_queuerun=NO
[in periodic.conf(5), of course]
I have added the above lines to my newly created /etc/periodic.conf file.
Thanks for all the help.
For some reason I get these errors on occasion. Mail is flowing, but I
want to make sure this error goes away...
Oct 28 03:01:00 ns1 postfix/sendmail[1523]: fatal: unsupported: -bh
Oct 28 03:01:01 ns1 postfix/sendmail[1524]: fatal: unsupported: -bH
Currently I am running FreeBSD 5.1, Postfix,
You forgot to disable the log generation in the daily periodic(8)
script. There are some other daily operations you should probably
disable, too. Try:
daily_clean_hoststat_enable=NO
daily_status_mail_rejects_enable=NO
daily_status_include_submit_mailq=NO
I have been running BSD for a week or so now. I have everything setup
just right, Webmail, DNS, IMAP, Webserver, etc
I just install a DDS-2 tape drive, I have been reading about using dump
for backing up filesystems. How can I use dump to backup the entire
drive? If I try using:
dump 0 -A
Well, there's no law that says you *have* to use the ports system, but
it's pretty strange not to take advantage of something so good...
There are pre-compiled packages available, but these generally don't
track the latest upstream updates to the ported software very
efficiently. The ports
Hi All,
I am new to this list and new to freeBSD. I run a Mandrake 9.1 server and
wish to convert to FreeBSD. Here are 2 questions that I have.
A) I have reinstall freeBSD many times over and over. I work with W2k
machine at work and do a Unattended install when I don't want to select
the same
37 matches
Mail list logo
