The FreeBSD Diary contains a large number of practical
examples and how-to guides. This message is posted weekly
to [EMAIL PROTECTED] with the aim of letting people
know what's available on the website. Before you post a question
here it might be a good idea to first search the mailing list
Physician heal thyself...
I recreated my install disks and the problem disappeared...
Will
--- W. J. Williams [EMAIL PROTECTED] wrote:
I keep getting the following error when trying to install FreeBSD 4.7
ad0: 9773MB FUJITSU MPF3102AT [19857/16/63] at ata0-master UDMA 33
Mounting
On Sat, Mar 08, 2003 at 11:53:20PM -0800, Josh Brooks wrote:
system A is a normal freeBSD system with two IP addresses.
system B is a jail on system A, using the second IP.
When I send mail from A to B, i get an error saying that the MX record
points back to myself.
Presumably this is
On Sun, Mar 09, 2003 at 09:14:29AM +, Matthew Seaman wrote:
Arrgh!
On the jailed system, you'll find that you can have sendmail listening
can't
on the loopback address. That means you'll have to modify the config
for both the sendmail MTA and
On Sunday, 9 March 2003 at 2:55:43 -0500, Jorge Mario G. wrote:
Hi
I have FreeBSD installed in a 2G HD (swap, /, /var, /usr)
Also I have 3 Hard Drives (/misc1 /misc2 /misc3)
Those are presumably file systems.
now I would like to build a concadenated volume with those 3
harddrives to make
On Saturday 08 March 2003 21:49, Thomas Haug wrote:
I had the same problem too.
The following shellscript helped (for csh):
while (1)
make buildkernel KERNCONF=mykernel make installkernel KERNCONF=mykernel
break;
end
you're right there tim, it is changing the place in the
On 07 Mar Subhasish Ghosh wrote:
So..what you should have done was to install Linux
as ext2fs and not ext3fs... :( Nothing can be done..
Sorry!!! anyway..this should act as a good lesson for
you... if you wanna migrate...totally from Linux to
FreeBSD as you have written you want to...make
Chuck Rock wrote:
On Sat, 8 Mar 2003, Michael K. Smith wrote:
This might be your issue, because you haven't specified the service after
you subnet. Try the following:
/usr/sbin/syslogd -a 207.206.185.1/27:* -a 209.83.132.1/27:*
Accordifn to the man page, that just specifies what port
wow that works :-) i just did a make buildkernel KERNCONF=mykernel and a
make installkernel KERNCONF=mykernel == init 6
after that, make buildworld runs without any problems :-) thanx for
helping !!
Thomas
Daniela wrote:
On Saturday 08 March 2003 21:49, Thomas Haug wrote:
I had the same
On Thu, 6 Mar 2003, Gerard Samuel wrote:
For the life of me, I cannot remember the command line program to take
screen shots.
Its been a while.
If someone could remind me with a man page would be great.
xwd -root
or
xwd -id /-name window (xev to get one easily)
Hi all,
I use vim for my coding needs, and only have one problem with it. Unless
I'm using gvim, my comments are a dark blue. This is almost unreadable
in some light conditions.
Does anyone have a quick hack to change comments to something easier to
see (e.g. green / yellow) for perl and C ?
for information.
i can't mount any msdos files systems with 4.7 release.
no problem with 5.0 (except for extented partitions; the
logicals partitions inside don't appear).
(Asus A7pro - IBM UDMA-66 12.6Go - IBM UDMA-100 80Go)
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
Wayne Pascoe wrote:
I use vim for my coding needs, and only have one problem with it. Unless
I'm using gvim, my comments are a dark blue. This is almost unreadable
in some light conditions.
Does anyone have a quick hack to change comments to something easier to
see (e.g. green / yellow) for
In [EMAIL PROTECTED], guillaume [EMAIL PROTECTED] typed:
for information.
i can't mount any msdos files systems with 4.7 release.
no problem with 5.0 (except for extented partitions; the
logicals partitions inside don't appear).
This isn't really something that anyone can do anything useful
Hi,
I am experiencing problems with my floppy drive controller in FreeBSD
5.0-RELEASE.
When I enable ACPI, I get some messages like fdc0: cannot reserve I/O port
range
Is there any known solution to this problem? Somebody wrote somewhere that
this is a problem of the IDE driver.
Kind
This is the 3rd week in a row where cvsup followed by portupgrade has
failed to build flac.
Is this a known problem? I'm getting a syntax error message, if that helps.
--
They that would give up essential liberty for temporary safety deserve
neither liberty nor safety.
On Sunday 09 March 2003 09:00 am, stan wrote:
This is the 3rd week in a row where cvsup followed by portupgrade has
failed to build flac.
Is this a known problem? I'm getting a syntax error message, if that
helps.
It was upgraded to 1.1.0 2 weeks ago. Have you been updating your INDEX
and
On Sun, 2003-03-09 at 12:00, stan wrote:
This is the 3rd week in a row where cvsup followed by portupgrade has
failed to build flac.
Is this a known problem? I'm getting a syntax error message, if that helps.
I encountered this, too. Simply remove the old version of flac, then
the new one
On Sun, Mar 09, 2003 at 09:24:04AM -0800, Kent Stewart wrote:
On Sunday 09 March 2003 09:00 am, stan wrote:
This is the 3rd week in a row where cvsup followed by portupgrade has
failed to build flac.
Is this a known problem? I'm getting a syntax error message, if that
helps.
It was
On Sun, Mar 09, 2003 at 12:33:09PM -0500, Joe Marcus Clarke wrote:
On Sun, 2003-03-09 at 12:00, stan wrote:
This is the 3rd week in a row where cvsup followed by portupgrade has
failed to build flac.
Is this a known problem? I'm getting a syntax error message, if that helps.
I
On Sun, 2003-03-09 at 12:49, stan wrote:
On Sun, Mar 09, 2003 at 12:33:09PM -0500, Joe Marcus Clarke wrote:
On Sun, 2003-03-09 at 12:00, stan wrote:
This is the 3rd week in a row where cvsup followed by portupgrade has
failed to build flac.
Is this a known problem? I'm getting a
On Saturday 08 March 2003 06:33 am, Miroslaw J. Wiechowski wrote:
The system installation program does not give me any
working configuration. The best I could get was some
ugly display with standard VGA, configured by XFree86 -configure.
Did anyone succeed with this Intel i810e chip and
On Saturday 08 March 2003 05:08 pm, Christian Laursen wrote:
I've been trying to figure out whether the Adaptec 2120S raid controller
is supported by FreeBSD.
Adaptec do not list FreeBSD as a supported platform for the 2120S like
they do for e.g. 2110S.
Is it supported, and if it is, by
On Sun, 9 Mar 2003 14:06:35 -0500
taxman [EMAIL PROTECTED] wrote:
On Saturday 08 March 2003 03:39 pm, joe moore wrote:
I have a Compaq Prosignia 200 with 4.3 GB and 9.1 GB SCSI drives on a
Compaq SCSI controller sym0 (875). 4.7-RELEASE installs and runs fine. I
cvsup'd to stable (as of a
Mike Meyer a ecrit:
This isn't really something that anyone can do anything useful
with. For instance, what does don't appear mean? I reported that the
devices for logical partitions weren't being created in 5.0-RELEASES
devfs. Is it that?
msdos partitions worked just fine on my 4.7 (now
Hi, -questions:
I needed to set up an Intel box to replicate a Sun E450 fileserver with
ten HDs, while my employer moves to a new office. I'm using an Abit
KT7A-RAID MB + four identical WD1200JB's in a RAID-0+1 config via the
HPT-370. The device is recognized as:
ar0: 228946MB ATA RAID0+1
Hello freebsd-questions,
I have a problem.
Today I have updated my sources of the system.
(kernel out of sync with userland)
I can't 'make buildworld', because of error in /usr/src//libgroff.
don't know how to build color.cc...
The kernel is 4.8-RC.
Sometimes (3-4 times a day)
In [EMAIL PROTECTED], guillaume [EMAIL PROTECTED] typed:
i tape: # mount -t msdos /dev/ad0s1 /hdibm
or: # mount -t msdos /dev/fd0.1440 /floppy
(or with ad0c, fd0c, ...)
and i get Bus error and a core file.
Sounds like /sbin/mount_msdos - /sbin/mount_msdosfs on 5.0 - is
broken. You can
On Sun, Mar 09, 2003 at 01:43:33PM -0500, taxman wrote:
On Saturday 08 March 2003 06:33 am, Miroslaw J. Wiechowski wrote:
The system installation program does not give me any
working configuration. The best I could get was some
ugly display with standard VGA, configured by XFree86
On Saturday, 8 March 2003 at 12:43:18 -0600, W. D. wrote:
Hi Greg,
I try these links:
ftp://ftp.lemis.com/pub/cfbsd/errata-1
ftp://ftp.lemis.com/pub/cfbsd/errata-2.ps
ftp://ftp.lemis.com/pub/cfbsd/errata-2.txt
ftp://ftp.lemis.com/pub/cfbsd/errata-2.ascii
IAccounts [EMAIL PROTECTED] writes:
Alternatively is there a way to dynamically tell BIND to get it's
forwarders list from /etc/resolv.conf?
This could be done pretty much the same way. I thought I'd done it on
my system, but as I look at named.conf, I don't seem to have ever
On Sat, Mar 08, 2003 at 05:55:58AM -0500, Aaron Walker wrote:
I was writing a little test threads program, and when I try to compile I
get this:
ka0ttic :~/code$gcc -o mttest mttest.c -lpthread
/tmp/cco18ppz.o: In function `thread_func':
/tmp/cco18ppz.o(.text+0xd2): undefined reference to
Hi,
I've installed FreeBSD 5.0-RELEASE sparc64 on a Ultra Enterprise 450 box
and I have a hard time adding a second ethernet card.
The on board hme0 works just fine but when I tried to install a Realtek
8139 fast ethernet addapter I get the following error message
Jan 17 21:41:15 kernel: rl0:
Title: American Language Center
CALL NOW!. 238-33-86, 778-98-94, 411-02-32
.
(Moscow Russia)
Said I loved you but I lied. Cause this is more then love I feel inside.
COMPLIMENT HER
I looked at my dmesg output today and it seems that 4.8-prerelease is now picking up
my built in Broadcom Ethernet card.
I now have this entry in demesg:
inphy0: i82555 10/100 media interface on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
I tried to switch my ppp.conf
A couple days ago, I asked on the -hackers list about a problem I was
having with Vinum and my Promise-based controllers. Søren replied with
how to do this by using atacontrol to build the volume. No Vinum seems
to be required.
I thought Vinum was FreeBSD's RAID system. If you wanted to do
On Sat, 08 Mar 2003, Len Conrad wrote:
Are you sure that configuring the TX2 as RAID 0 array is what you want to
do, vs SPAN (aka JBOD)?
To boot from the Fasttrack card, I needed at least one RAID device
defined in its BIOS. The Promise tech said a good NOOP was to just have
a one disk
|-| ! $ |-| |\| ! | wrote:
Hello freebsd-questions,
I have a problem.
Today I have updated my sources of the system.
(kernel out of sync with userland)
I can't 'make buildworld', because of error in /usr/src//libgroff.
don't know how to build color.cc...
The canonical answer is
Estimados Srs,
necesito ayuda para resolver un problema,explico: el cooler del servidor dejo de funcionar y se colgo la máquina, entonces no había forma de apagarlo, la unica forma es con el botoncito del CPU. Después de cambiar el cooler, todo inicia hasta que se planta en las siguientes lineas:
Hi again. On a test machine, I have changed the line in inetd.conf to
something like:
telnet stream tcp nowait root/usr/libexec/telnetd
telnetd -a none -p /path/to/my-auth-program
and I have hup'd inetd. However, when I try to telnet to this
machine, I still go through the
First off, thank you for your help. Here is what I did:
first, I edited /etc/mail/freebsd.mc and made it look like this:
dnl Uncomment both of the following lines to listen on IPv6 as well as
dnl DAEMON_OPTIONS(`Name=IPv4, Family=inet')
dnl DAEMON_OPTIONS(`Name=IPv6, Family=inet6')
Pete wrote:
[ ... ]
I thought Vinum was FreeBSD's RAID system. If you wanted to do software
RAID with FreeBSD, you needed to use Vinum. Now I find this out. Does
that ATA subsystem have RAID support built in? (Since atacontrol just
seems to control the ATA devices...) If this is so, what's
I'm not subscribed to the list, but I've got a working
i810 at 1280x960, 24bpp:
Relevant lines,
(dmesg)
agp0: Intel 82810E (i810E GMCH) SVGA controller mem
0xffa8-0xffaf,0xf800-0xfbff irq 11 at
device 1.0 on pci0
(XF86Config)
Section Device
Identifier i810
Hello all,
uname -a
FreeBSD roam.caffeinated-systems.com 4.7-STABLE FreeBSD 4.7-STABLE #0:
Wed Dec 25 11:36:16 CST 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386
I have an Elo Touchscreen Intellitouch E281-2310 (as reported by XFree)
serial controller. If I connect the USB
David,
Lo siento para mi espanol peor
Este es una lista en ingles. Mira a:
http://www.freebsd.org/es/support.html#mailing-list
hay listas alli en espanol.
Manda un email con no subjeto, y solo la palabra:
lists
a [EMAIL PROTECTED] Este manda una lista de la listas en espanol.
Y trata de mandar
In the immortal words of David Banning [EMAIL PROTECTED]...
I wasn't clear enough. I need to get the IP address in -unix-.
Try looking at your environment variables
SSH_CLIENT='xxx.xxx.xxx.xxx 1220 22'
SSH_TTY=/dev/ttyp1
--
| The most exciting phrase to | Tim Aslat [EMAIL PROTECTED] |
|
In the immortal words of Tim Aslat [EMAIL PROTECTED]...
Try looking at your environment variables
SSH_CLIENT='xxx.xxx.xxx.xxx 1220 22'
SSH_TTY=/dev/ttyp1
Sorry, I should have been more specific, this is the ENV variables from
my server that I'm logged into via SSH showing the source
- Original Message -
From: Rod Person [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Sent: Sunday, March 09, 2003 6:34 PM
Subject: New Device inphy0??
I looked at my dmesg output today and it seems that 4.8-prerelease is now
picking up my built in Broadcom Ethernet card.
I
Is there a tool on the FreeBSD CD I can use to combine 2 partitions(BSD
and/or FAT).
Thanks...
-
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
David Banning wrote:
I am running an Xwindow on a windows box. I need a script to
tell me what my network address is so that I can set my DISPLAY
varible correctly eg: 192.168.1.2:0.0
Any idea what command would be useful for this purpose?
It's ugly. It won't work if you multiple NICs.
On Sun, Mar 09, 2003 at 09:30:22PM -0800, Michael Collette wrote:
David Banning wrote:
I am running an Xwindow on a windows box. I need a script to
tell me what my network address is so that I can set my DISPLAY
varible correctly eg: 192.168.1.2:0.0
Any idea what command would be
Mike Meyer a ecrit:
Sounds like /sbin/mount_msdos - /sbin/mount_msdosfs on 5.0 - is
broken. You can rebuild the command from src in
/usr/src/sbin/mount_msdos - or mount_msdosfs - and doing a make
install. If you don't have the sources handy, you'll need to
reinstall one of the distribution
DEAR SIR,
I HAVE THE HONOUR AND CONFIDENCE TO INTRODUCE TO YOU
THIS BUSSINESS IN VIEW OF THE FACT THAT YOU ARE
TRUSTWORTHY AND RELIABLE.
I AM MR. Ango A, THE EASTERN DISTRICT ACCOUNTANT OF
STANDARD TRUST BANK PLC (STB). THERE IS AN ACCOUNT
OPENED IN THIS BANK IN 1982 AND SINCE 1990 NOBODY HAS
dvi - ps
dvips -P pdf file.dvi
ps - pdf
ps2pdf file.ps
Regards,
Shantanu
+++ Murray Taylor [freebsd] [06-03-03 11:59 +1100]:
| Answering own question...
|
| Digging further into the build logs found ps2pdf from the Ghostscript build
| which does
On Sun, 9 Mar 2003, Michael Collette wrote:
It's ugly. It won't work if you multiple NICs. It may just work for what you
need just the same.
echo `ifconfig | grep broadcast | cut -d -f2`:0.0
This takes the output of ifconfig and parses it just a wee bit with grep and
cut. I use
Nope, Your display variable must be set to the IP or hostname of the X
Server, which in this case is the Windows machine. X mangles the
client/server difference, since the box displaying teh window is teh Server
(And specified via DISPLAY) while the remote system running the apps is the
client.
On Sunday 09 March 2003 09:30 pm, Ahmad Imran wrote:
Please send us Ex-Manufacturing Prices for your products and relevant
quantities. We would like to Import In Pakistan and represent you in
Pakistan.
Well i had great dificulty figuring out what you wanted and why it was sent to
this mailing
On Sun, 9 Mar 2003 19:05:47 -0800
Daxbert [EMAIL PROTECTED] wrote:
Suggestions?
send a PR :)
clem
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Quoting David Banning [EMAIL PROTECTED]:
I am running an Xwindow on a windows box. I need a script to
tell me what my network address is so that I can set my DISPLAY
varible correctly eg: 192.168.1.2:0.0
Any idea what command would be useful for this purpose?
DISPLAY=`who -m | awk
On Sun, 9 Mar 2003, David Banning wrote:
I am running an Xwindow on a windows box. I need a script to
tell me what my network address is so that I can set my DISPLAY
varible correctly eg: 192.168.1.2:0.0
Any idea what command would be useful for this purpose?
If I understand correctly and
On Mon, Mar 03, 2003 at 01:38:21AM -0700, Greyhart wrote:
I'm getting the error Signal 11 was caught, just after committing to
the install. The system then shuts down and reboots. I have run the
installer several times, and get the same error each time. I have turned on
Debug in the
On Sun, Mar 09, 2003 at 07:48:54PM -0800, Daxbert wrote:
Quoting David Banning [EMAIL PROTECTED]:
I am running an Xwindow on a windows box. I need a script to
tell me what my network address is so that I can set my DISPLAY
varible correctly eg: 192.168.1.2:0.0
Any idea what
On Sun, Mar 09, 2003 at 10:29:38PM -0500, Adam Maas wrote:
Nope, Your display variable must be set to the IP or hostname of the X
Server, which in this case is the Windows machine. X mangles the
client/server difference, since the box displaying teh window is teh Server
(And specified via
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi everybody!
David Banning wrote:
To use XWin32 (Ditch it, it's very buggy, eXceed is far superior),
you need
this is -very- welcome advice, becuase you are right. It is buggy,
and I didn't know there was any quality alternatives.
I am
On Saturday 08 March 2003 04:26 pm, charles pelletier wrote:
Okay, just to make sure this is correct (my first use of the newer more
current kernel config)..
The only steps involved are those listed in the handbook:
Change to the /usr/src directory.
# cd /usr/src
Compile the kernel.
thanks for the help !
Charles Pelletier
Tech Coordinator
St Luke's School
Irving, TX
-Original Message-
From: taxman [mailto:[EMAIL PROTECTED]
Sent: Sunday, March 09, 2003 12:50 PM
To: [EMAIL PROTECTED]; 'freebsd'
Subject: Re: kernel configuration
On Saturday 08 March 2003 04:26 pm,
So, I'm working on a small threaded program here, and I get these:
Mar 9 07:39:53 mortis kernel: failed to set signal flags properly for ast()
Mar 9 07:39:53 mortis kernel: failed to set signal flags properly for ast()
Mar 9 07:42:21 mortis last message repeated 3 times
Mar 9 07:51:00
On Sat, Mar 08, 2003 at 10:02:41PM -0500, David Banning wrote:
I am having a problem where my monitor shuts down into power saving
mode, and does not always come back up when I hit the keyboard
or move the mouse.
I am running FreeBSD 4.7 with XFree86 4.3 and xfce window manager.
My question
To Whom It May Concern:
Can you please tell me what this error means:
mail: /usr/sbin/sendmail: Exec format error
I get this error when trying to send mail (internally to other users on my
host). I think the error might have to do with the recent patch I tried
appying to my FreeBSD v4.7
On Sun, Mar 09, 2003 at 08:25:02AM -0600, Matthew D. Fuller wrote:
What should I be doing in the program that I'm not to avoid that message?
Or does it actually not really mean anything for my process, and is all
kernel-related?
It's a bug in the kernel, for which there is insufficient
I have one server running on a static IP, using a DSL line, but
the box is pretty heavily loaded with all kinds of programs. It is
becoming kind of undependable because sometimes X crashes the box,
or I am experimenting and it brings down my server.
I have an extra pentium 100 machine and my idea
On Sun, Mar 09, 2003 at 01:40:48PM -0800, Michael A. Alestock wrote:
To Whom It May Concern:
Can you please tell me what this error means:
mail: /usr/sbin/sendmail: Exec format error
I get this error when trying to send mail (internally to other users on my
host). I think the error
On Friday 07 March 2003 14:06, Gerard Samuel wrote:
For the life of me, I cannot remember the command line program to take
screen shots.
Its been a while.
If someone could remind me with a man page would be great.
If you are going to need to edit the screenshot later, you could simply create
On Sunday, 9 March 2003 at 19:46:00 -0600, harsha godavari wrote:
Hi Greg:
If I want to rpint out my own copy of the BSD handbook
using a HP540 printer (or i may take it Kinkos) which(version ps/pdf
etc) is the best file to download. Thanks for your help.
To print things locally,
I am running an Xwindow on a windows box. I need a script to
tell me what my network address is so that I can set my DISPLAY
varible correctly eg: 192.168.1.2:0.0
Any idea what command would be useful for this purpose?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
Quoting David Banning [EMAIL PROTECTED]:
I am running an Xwindow on a windows box. I need a script to
tell me what my network address is so that I can set my DISPLAY
varible correctly eg: 192.168.1.2:0.0
Any idea what command would be useful for this purpose?
How are you connecting to
run ipconfig or winipcfg (The former for NT/2k/XP, the latter for 95/98/Me)
Adam
- Original Message -
From: David Banning [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, March 09, 2003 9:11 PM
Subject: identifying my network address
I am running an Xwindow on a windows box. I
Good Day
Info Needed
Please send us Ex-Manufacturing Prices for your products and relevant
quantities. We would like to Import In Pakistan and represent you in
Pakistan.
Please arrange information as per following:
1. Capacity in GB.
2. Cost Per Month / Total Cost Of Operation.
I've made a small patch to
if_dc.c / if_dcreg.h / dc.4
to support the 3Com OfficeConnect 10/100.
What do I do now?
MAINTAINERS didn't seem to have an entry
related to NICs and so I'm not sure where to turn.
mbr / trhodes / semenu
are the 3 most recent modifiers of if_dcreg.h
On Sun, Mar 09, 2003 at 06:20:24PM -0800, Daxbert wrote:
Quoting David Banning [EMAIL PROTECTED]:
I am running an Xwindow on a windows box. I need a script to
tell me what my network address is so that I can set my DISPLAY
variable correctly eg: 192.168.1.2:0.0
Any idea what
On Sun, Mar 09, 2003 at 09:26:51PM -0500, Adam Maas wrote:
run ipconfig or winipcfg (The former for NT/2k/XP, the latter for 95/98/Me)
I wasn't clear enough. I need to get the IP address in -unix-.
Adam
- Original Message -
From: David Banning [EMAIL PROTECTED]
To: [EMAIL
As per this announcement I updated my source tree to 'date=2003.03.08.10.10.00'
picking a date later than the Mar 4th date of FreeBSD-SA-03:04.
From the announcement:
1) Upgrade your vulnerable system to 4-STABLE; or to the RELENG_5_0,
RELENG_4_7, or RELENG_4_6 security branch dated after
I am using a pre-compiled binary database rdbms which allows for
a shell command to be executed from within. So from within it
I have it execute a shell script which eventually executes netscape to show
a report. Everything works fine except three different versions of netscape
all show the same
On Sunday, 9 March 2003 at 23:49:21 -0600, W. D. wrote:
Just bought your 3rd edition.
Hey Greg, what's the deal with these .ems files?
I'm not sure which ones you're talking about. You mean this?
544aff.jpg Re The Complete FreeBSD, sec1.emsfile://D:\Programs\Eudora\attach\Re
The Complete
On Mon, 10 Mar 2003 at 00:47:59 -0500, [EMAIL PROTECTED] wrote:
As per this announcement I updated my source tree to
'date=2003.03.08.10.10.00' picking a date later than the Mar 4th date
of FreeBSD-SA-03:04.
From the announcement:
1) Upgrade your vulnerable system to 4-STABLE; or to
DEAR SIR,
I HAVE THE HONOUR AND CONFIDENCE TO INTRODUCE TO YOU
THIS BUSSINESS IN VIEW OF THE FACT THAT YOU ARE
TRUSTWORTHY AND RELIABLE.
I AM MR. Ango A, THE EASTERN DISTRICT ACCOUNTANT OF
STANDARD TRUST BANK PLC (STB). THERE IS AN ACCOUNT
OPENED IN THIS BANK IN 1982 AND SINCE 1990 NOBODY HAS
Quoting Viktor Lazlo [EMAIL PROTECTED]:
On Sun, 9 Mar 2003, Daxbert wrote:
DISPLAY=`who -m | awk '{print $6}' | sed -e 's/[(|)]//g'`:0.0
I'm sure there's a shorter, cleaner way...but it works.
Since you're using awk anyways why not eliminate piping through sed:
DISPLAY=`who -m |
87 matches
Mail list logo
