Hi Admin,
I am a user of FreeBSD, and want to support Emulex or Adaptec Fibre-Channel
HBA on x86 platform.
Does current FreeBSD support their drivers? or, Have you any suggestion to
download those source?
Thanks so much!
Cecilia
Thanjee Neefam wrote:
I am considering buying a new laptop (my current one is a Dell Inspiron
PII-233 without a CD Drive (it broke :( ))
I just simply want to know if there is a particluar range of laptops that
work better with FreeBSD. ie: they use totally standard quality hardware,
no panic
Hi,
When I am trying to build netperf2.2pl2.tar.gz for FreeBSD4.8, I am
encountering the following errors
I have made a change in the make file (made the file to be extracted as
netperf2.2pl2.tar.gz)
Errors:
-
$ pwd
Machine will run one copy of FreeBSD5.1 and has three hard drives: 2 x 200GB
and 1 x 100GB drives. I was planning to use the 100GB for backup to store
dump images of this machine. The 200GB drives are mirrored root vinum
volumes - however that is accomplished.
The purposed of the machine:
-
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday, 28. July 2003 04:25, Karl Agee wrote:
Ok, so, if you could buy only ONE of the currently available FreeBSD books,
which one would it be???
First, you the handbook available both via www and on your local
FreeBSD-installation
On Sun, Jul 27, 2003 at 06:20:27PM -0500, Duane Stark wrote:
To preface this, I'm not OS retarded - just BSD retarded ;) I haven't had to mess
with my current BSD server since I bought it, and now I have purchased a new p4
3.0(something), 2 gig ram, 2 IDE 200gig HD's to replace it..
Here
Hi,
Does anyone know how to change gnome fonts
from KDE/command-line? I tried running
gnome-control-center, which worked, but only
the fonts for the control center and gthumb
have changed.
I posted recently about this. Look for subject Changing GTK fonts outside
gnome in the archive. It may
I am considering buying a new laptop (my current one is a Dell
Inspiron PII-233 without a CD Drive (it broke :( ))
I just simply want to know if there is a particluar range of laptops
that work better with FreeBSD. ie: they use totally standard quality
hardware, no panic on installs, also
On Sun, Jul 27, 2003 at 07:30:27PM -0700, Tom Samplonius wrote:
On Sun, 27 Jul 2003, marlon corleone wrote:
device scbus # SCSI bus (required)
device da
since i have ni scsi device
...
I don't think you can remove it, because it is used by a lot of
On Mon, Jul 28, 2003 at 04:26:57AM +, DanB wrote:
I made an error in routing table alias added 10.0.0.1 to either net port
that had an standard outside IP on it also. It made 3 other router go
down I could ping them but they wouldn't route. The SSH on all boxes
went down.
Is there an
Attached is the output of cd /usr/ports/textproc/gtkspell2/ make install
Could anyone who is experienced with this shed some light on how I can get
through successfully.
Thanks in advance,
-Wash
--
Odhiambo Washington
Wananchi Online Ltd.,
[EMAIL PROTECTED] 1st Flr Loita Hse.
Tel: 254 2
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi,
My name is Dorin Scutarasu. I recently read some really interesting
articles about Unix and the open source comunity and I want to install a
BSD on my computer.
I have an old computer (an AMD 80486 DX2 at 80Mhz) with very little disk
space available(about 50MB). It is running
Windows 95 but
I am running FreeBSD 5.1-RELEASE.
1. Whenever I start X, I see the information shown in the following file -
https://beastie.wananchi.com/~wash/XFree86-log.txt
This, while I actually have installed v4.3 from the ports. Is it that some
files are still lurking somewhere or what?? Why does it
Hi,
Hi,
will this be ok?
http://people.freebsd.org/~picobsd/picobsd/doc/intro.html
My name is Dorin Scutarasu. I recently read some really interesting
articles about Unix and the open source comunity and I want to install a
BSD on my computer.
I have an old computer (an AMD 80486 DX2 at
As the original poster of this thread I feel compelled to provide some more
information.
I am running FreeBSD 5.0 that I obtained through the FreeBSD Unleased book I
purchased from Barnes Noble.
Here is a numerated list of more:
1. Sony VAIO PCG-GRX550 laptop.
2. 40gb hard drive
3. 512mb RAM.
SCP where does the file xfer to? scp file.tar.gz
[EMAIL PROTECTED]
Look in the directory for longterm it was not there. I transfered it as
root.
Dan
___
[EMAIL PROTECTED] mailing list
On Mon, Jul 28, 2003 at 11:45:08AM +, DanB typed:
SCP where does the file xfer to? scp file.tar.gz
[EMAIL PROTECTED]
If this is really the command you used (without : after chatusa.com),
check the directory you were in when you issued the command and look
for a file called [EMAIL
Hi,
I had looked for information about my problem,
but I couldn't find similar.
I have two pcs, one with Win XP has 2 network cards.
The other PC with FreeBSD with one network card only.
I want to keep my main Internet connection with XP.
I want to connect the extra network card to FreeBSD,
so I
Dear Sir(s),
Rambler (www.rambler.ru) developed new search tool working
with FreeBSD project mail archives. You can try it at
http://freebsd.rambler.ru/
Index contains messages from all mail archives including cvs commits,
bug reports, etc. We plan to update database daily.
Any comments,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday, 28. July 2003 13:40, DJ Landreneau wrote:
As the original poster of this thread I feel compelled to provide some more
information.
I am running FreeBSD 5.0 that I obtained through the FreeBSD Unleased book
I purchased from Barnes
On Mon, 2003-07-28 at 07:58, Vlad Shabanov wrote:
Rambler (www.rambler.ru) developed new search tool working
with FreeBSD project mail archives. You can try it at
http://freebsd.rambler.ru/
Index contains messages from all mail archives including cvs commits,
bug reports, etc. We plan
Dear Sir,
I am an extremely novice FreeBSD (and Unix) user, and I am trying to install
Java 1.1.8 on my Unix box. I have downloaded the correct archive file and
unpacked it using TAR, but when I come to run the next step of the
instructions supplied, 'make', I get the error 'no target to make'.
On Mon, 2003-07-28 at 07:27, David Lynch wrote:
Dear Sir,
There are many females that use this list regularly.
I am an extremely novice FreeBSD (and Unix) user, and I am trying to install
Java 1.1.8 on my Unix box. I have downloaded the correct archive file and
unpacked it using TAR, but
- Original Message -
From: Adam [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 28, 2003 3:04 PM
Subject: Re: new search tool for FreeBSD community
On Mon, 2003-07-28 at 07:58, Vlad Shabanov wrote:
Rambler (www.rambler.ru) developed new search tool working
with FreeBSD
ditto!
I just tried it out and it seems to work just fine. I'll be bookmarking
this one. Thanks.
--
Adam [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
On Mon, Jul 28, 2003 at 07:51:24PM +0800, #I NYOMAN SUKA ADA# wrote:
Hi,
I had looked for information about my problem,
but I couldn't find similar.
I have two pcs, one with Win XP has 2 network cards.
The other PC with FreeBSD with one network card only.
I want to keep my main Internet
Hello Everyone,
Im on FreeBSD 4.8-R Fresh installation.
I want to use ppp , ppp.conf is already configured.
cuaa0, cuaa1, tun0 is configured in /dev
when ever i ppp from command promp. this is what happens..
# ppp
Working in interactive mode
and it stops! then i have
Hey list,
I was asked by a friend to run a jedi knight 2 server
for his clan on one of my fbsd servers. However, I ran
into a problem. top'ing , i noticed the server was
using 98% cpu it should be idle. I killed it
started another jk2 server not in background. As soon
as i typed 'map name', it
Hi
If you just want to be able to connect to services on the FreeBSD box
from your XP box, then you should just give your XP box's internal
network adapter and the FreeBSD box's network adapter an IP address
withing the same internal subnet.
For example give you XP box the address 10.0.0.1 and
Hi everybody.
Got a problem with my desktop running FreeBSD 5.1, hanging on boot.
Connected to Internet via adsl and a FreeBSD 4.8 NAT Gateway-box.
uname -a
FreeBSD thor.swedehost.com 5.1-RELEASE FreeBSD 5.1-RELEASE
#0: Sat Jul 26 16:35:38 CEST 2003
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/THOR
Hi everybody.
I have a problem doing searches in the mailarchive.
This is the message I get :
Mail Archive Search
None of the archives you requested (freebsd-newbies, freebsd-questions and
freebsd-user-groups) are available at this time.
Please try again later, or return to the search page and
Wow, thank you Scott.
Now I even got the FreeBSD online on the internet.
Thanks.
Guido
-Original Message-
From: Scott Mitchell [mailto:[EMAIL PROTECTED]
Sent: Mon 7/28/2003 8:38 PM
To: #I NYOMAN SUKA ADA#
Cc: [EMAIL PROTECTED]
Subject:
I have a FreeBSD 5.0-RELEASE machine that was running 24/7 for about a month, hosting
my web server. Unfortunately, yesterday our area experiences a series of power
outages, one apparently long enough to have drained my UPS, and the BSD machine
crashed as a result.
When trying to bring the
I'm tri-booting 98/XP/BSD with a Chaintech Zenith 7NJS motherboard (btw: the GAG
bootloader works great!). 98 and XP detect my on-board NIC without much effort, but
FreeBSD 5.1-RELEASE doesn't seem to like it. It keeps wanting to use my firewire card
as a NIC. The BIOS has been updated to the
I am installing FreeBSD on a new laptop but have problems with the
keyboard within X.
Symptoms: if the pause between stroking key1 and key2 is short, key1 is
repeated.
When: FreeBSD 5.1, always. FreeBSD 4.8, only when the XKEYBOARD
extension is enabled.
I've tried modifying the key repeat
Matthew,
That explains it perfectly! However, let me throw this on the pile and let me have
your opinion on it:
1) Hardware load balancing is an option (or so I found out from the people that built
the server) .. Using ATA133 RAID. Being this is an option, should I hardware LB or
software
I have already done everything to make my usb keyboard work in FreeBSD
(both 4.8 and 5.1) to no avail. It detects is correctly and sets it up
as supposed to, but the show does not go on.
In linux the usbkeyboard works but there is also a ehci controller
loaded (ehci-hcd 00:1d.7: Intel Corp.
Benjamin Walkenhorst [EMAIL PROTECTED] writes:
On Monday, 28. July 2003 13:40, DJ Landreneau wrote:
As the original poster of this thread I feel compelled to provide some more
information.
I am running FreeBSD 5.0 that I obtained through the FreeBSD Unleased book
I purchased from
DJ Landreneau [EMAIL PROTECTED] writes:
As the original poster of this thread I feel compelled to provide some more
information.
I am running FreeBSD 5.0 that I obtained through the FreeBSD Unleased book I
purchased from Barnes Noble.
Here is a numerated list of more:
1. Sony VAIO
Lo all,
I managed to get the CBCP stuff away, by disabling some advance features in
windows (LCP Extensions, etc). Can somebody perhaps shed some light on the
logs now and perhaps give an indication why the server may now still be
failing... It's FBSD4.8, logs are below.
--
Chris
Jul 28
I'm attempting to set up a transparent web proxy under 5.1 using
the user land ppp and squid. I am already using that FreeBSD box
for ppp and NATing. I also have squid set up and it seems to work
when I manually configure the web clients (but not all the web
clients in the house can be
On Mon, 2003-07-28 at 05:01, Odhiambo Washington wrote:
Attached is the output of cd /usr/ports/textproc/gtkspell2/ make install
Could anyone who is experienced with this shed some light on how I can get
through successfully.
Looks like something is wrong with your gtk20 installation. Have
+-- Lakshmi Sudha Vangara [freebsd] [28-07-03 12:05 +0530]:
|
| Hi,
|
| When I am trying to build netperf2.2pl2.tar.gz for FreeBSD4.8, I am
| encountering the following errors
|
| I have made a change in the make file (made the file to be extracted as
| netperf2.2pl2.tar.gz)
|
| Errors:
|
is there any script or package in ports, that make a
colorful bash.
thanks
__
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
___
[EMAIL PROTECTED] mailing list
John DeStefano [EMAIL PROTECTED] writes:
Lowell Gilbert [EMAIL PROTECTED] wrote:
Thanks for your response, Lowell, as always.
John DeStefano writes:
Due to ISP restrictions, I must change the default port on which
ftpd
runs in order to enable ftp access to and from my machine.
marlon corleone [EMAIL PROTECTED] writes:
is there any script or package in ports, that make a
colorful bash.
That depends on what you want to add color to.
If you want a colorful prompt, you just add ANSI
color sequences to your prompt definition.
If you want ls output to be colored, just
I don't see login id and password being sent. Do you have statements
in ppp.conf for login id and password? Post these files
/etc/ppp/ppp.conf, /etc/rc.conf
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Chris Knipe
Sent: Monday, July 28, 2003 12:44 PM
To:
I have been unable to run an X client+server on 4.8 release for several
weeks due to what appears to be a known issue. The problem surfaced a
few days after my weekly port upgrade (none of the upgrades were X
related - the previous weeks upgrade did update an X port, but I'm not
certain which).
On 28 Jul 2003, at 14:02, Lowell Gilbert wrote:
marlon corleone [EMAIL PROTECTED] writes:
is there any script or package in ports, that make a
colorful bash.
That depends on what you want to add color to.
If you want a colorful prompt, you just add ANSI
color sequences to your prompt
Hello,
I am still compiling and using ipfw1 because I can't seem to figure out
how to convert my rules to the ipfw2 lingo...
Here are my rules...
#!/bin/sh
/sbin/ipfw -f flush
/sbin/ipfw add divert natd ip from any to any
/sbin/ipfw add allow all from any to any
Now I hear that
Quick question:
I am replacing a server with a new one. Freebsd versions are different (old 4.6
STABLE, new 4.8) and qmail / vpopmail versions are most likely different (havent
updated qmail since I built the server over a year ago.
Is there any easy way to do this? Does anyone have the
Duane,
The qmail version has not changed in years. Vpopmail is pretty active.
What are you trying to do? Migrate to a new server?
Check out inter7.com, they make vpopmail.
Max
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Duane Stark
Sent: Monday, July
Duane Stark wrote:
Quick question:
I am replacing a server with a new one. Freebsd versions are different (old 4.6 STABLE, new 4.8) and qmail / vpopmail versions are most likely different (havent updated qmail since I built the server over a year ago.
Is there any easy way to do this? Does
Hi everybody.
Got a problem with my desktop running FreeBSD 5.1, hanging on
boot. Connected to Internet via adsl and a FreeBSD 4.8 NAT
Gateway-box.
uname -a
FreeBSD thor.swedehost.com 5.1-RELEASE FreeBSD 5.1-RELEASE
#0: Sat Jul 26 16:35:38 CEST 2003
[EMAIL
Hey Max,
Yup, I am migrating from one server to another.. So it'sa migration + upgrade (as the
new server will get new installs of all the current software programs I use)
Thanks again for your help.
-D
PS On this same note, is there an easy way to migrate freebsd user accounts from one
Duane,
If this is only a software upgrade I would suggest running a make world on
your current box. FreeBSD accounts or vpopmail accounts?
I've never tried to migrate system accounts, I would assume that this would
entail setting up ldap/kerberos/nis or some type of sso service. Vpopmail
should
On Mon, Jul 28, 2003 at 12:03:55AM -0700, Richard Johannesson wrote:
Is there ever an advantage of having two slices for a drive when running
just one copy of FreeBSD on there? So, let's say split the 200GB into two
slices. First will have the standard partitions /, /var, /tmp, swap, /usr.
On Sat, Jul 26, 2003 at 12:27:03AM -0500, Dan Nelson wrote:
You sure? Are you failing with this error:
=== Checking if portd/portname already installed
*** Error code 1
This is almost certainly caused by an old pkg_info command that does
not understand -O. To disprove me:
As I've
On Mon, Jul 28, 2003 at 10:36:27AM -0500, DP Support wrote:
Matthew,
That explains it perfectly! However, let me throw this on the pile and let me have
your opinion on it:
1) Hardware load balancing is an option (or so I found out from the people that
built the server) .. Using ATA133
On Mon, Jul 28, 2003 at 08:24:04AM -0700, John DeStefano wrote:
The chipset is NVIDIA nForce2 Ultra 400+ MCP-T, and Chaintech calls the NIC
interface On-board LAN controller: Fast Ethernet Controller with MII Interface;
Support 10/100Mb Fast Ethernet with External PHY.
I don't think a
Its hard to buy only one book. But if I must:
FreeBSD: An Open-Source Operating System for Your
Personal Computer, Second Edition (with CD-ROM)
By: Annelise Anderson (Bit Tree Press)
# Paperback: 443 pages
# ISBN: 0971204519
# List Price: $24.00
--- Karl Agee [EMAIL
Vlad Shabanov [EMAIL PROTECTED] writes:
Rambler (www.rambler.ru) developed new search tool working
with FreeBSD project mail archives. You can try it at
http://freebsd.rambler.ru/
Index contains messages from all mail archives including cvs commits,
bug reports, etc. We plan to
Its hard to buy only one book. But if I must:
FreeBSD: An Open-Source Operating System for Your
Personal Computer, Second Edition (with CD-ROM)
By: Annelise Anderson (Bit Tree Press)
I would have trouble picking just one. I have four plus print out
chunks of the handbook at times.
We've got a server that occassionally becomes temporarily useless
because the load average shoots up to around 150.0 or so, and then slowly
winds down over a 2 minute period. I cannot seem to find the process which
is putting so much load on the machine. I've tried running top with the q
We've got a server that occassionally becomes temporarily useless
because the load average shoots up to around 150.0 or so, and then slowly
winds down over a 2 minute period. I cannot seem to find the process which
is putting so much load on the machine. I've tried running top with the q
That is a good idea, thanks. We did check that though. Went through
each user's accounts checking their .forwards and procmaillrc files.
We are running spamassassin 2.55, and in the global procmailrc file we
call spamc which connects to a spamd running on another machine.
Are you
On Mon, 28 Jul 2003, Jamie wrote:
That is a good idea, thanks. We did check that though. Went through
each user's accounts checking their .forwards and procmaillrc files.
We are running spamassassin 2.55, and in the global procmailrc file we
call spamc which connects to a spamd
Are you running razor? Something that I have experienced with spamassassin
is if you have external network checks enabled and spamassassin cannot
connect to the resource uptime goes crazy.
Max
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jamie
Sent:
No, we aren't running razor, just the base spamassassin without razor,
DCC, or Pyzor.
On Mon, 28 Jul 2003, Max Clark wrote:
Are you running razor? Something that I have experienced with spamassassin
is if you have external network checks enabled and spamassassin cannot
connect to the
hi all
does anyone have any recommendations for good open source content
management systems for
websites?
i have about a 5 page site running on a freebsd/apache server. it
gets a fair number of hits a day.
right now, the great majority of my pages are statically generated by my
30+
I was wondering how to modify the appropriate files to setup a FreeBSD
computer to act as a NAT Router, that would do the following:
One NIC card is connected to a private network, with an IP address of
192.168.0.50. This will act as the gateway to all the computers in the
technology center, to
We have received a file on a floppy disk from a client. When we put it into
the drive it says that disk has not been formatted. We already read from the
disk and transferred the file to another system earlier. Why, after we have
already used the file on the floppy disk does it now tell us
On Monday, 28 July 2003 at 13:31:10 -0400, [EMAIL PROTECTED] wrote:
We have received a file on a floppy disk from a client. When we put it into
the drive it says that disk has not been formatted. We already read from the
disk and transferred the file to another system earlier. Why, after we
[EMAIL PROTECTED] wrote ([EMAIL PROTECTED]) on
7/28/03 6:13 PM]
i'd also be into investigating commercial cms's, although i'd like to
stick with open source if possible...
Check out Zope. http://www.zope.org
--
george donnelly ~ http://www.zettai.net/ ~ Quality Zope Hosting
Shared and
On Monday 28 July 2003 07:13 pm, [EMAIL PROTECTED] wrote:
i'd also be into investigating commercial cms's, although i'd like
to stick with open source if possible...
Try googling on PHP-Nuke, PostNuke, and Zope for starters.
PHP-Nuke and PostNuke use PHP and require a database (MySQL will
Multi Neoprene China Factory
T : 0086-769-5835182 F : 0086-769-5586689
US$
S012 13.00
S014 17.00
D955 2.50/Pr
DSCF0009
Multi Neoprene China Factory
T : 0086-769-5835182 F : 0086-769-5586689
US$
S012 13.00
S014 17.00
D955 2.50/Pr
DSCF0009
Hello,
I was wondering if anyone here runs the FreeBSD booth setup up at
LinuxWorld this year in SF. If you are here, looking for voluteers?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On Mon, Jul 28, 2003 at 06:58:28PM -0700, Remington wrote:
Hello,
I was wondering if anyone here runs the FreeBSD booth setup up at
LinuxWorld this year in SF. If you are here, looking for voluteers?
This would be more appropriate to ask on advocacy@
Kris
pgp0.pgp
Description: PGP
Hi:
I burn 2 CD of FreeBSD 4.8-STABLE, can i install the software form them
not from the internet.
maps
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello
If I start sweep (a from Sophos Antivirus) there occurs the following error
ELF interpreter /compat/linux/usr/lib/ld.so.1 not found
I read a lot of stuff and googled but didn't find the right answer. What is
here going wrong?
--
Regards
Martin Schweizer
[EMAIL PROTECTED]
PC-Service
how do i boot graphically in fluxbox?
im booting up fluxbox in startx method, if i want to
boot it in graphical mode, should i COMMENT this
entry:
exec /usr/X11R6/bin/fluxbox in my .xinitrc and put
the entry in .xsession, is that all i have to do?
thanks and more power BSD lover.
Hi downloaded the freebsd 5.0 miniinstall over the weekend. cd boots up fine loads
all files had a look at installing ports that are availbe gave me an error could not
find index. booted in windows checked the cd everthing was fine had index and
index5.h file in ports dir also had the
startx wont load anymore running it as root. the
problem started when i got a improper shutdown, and
when i reboot
i saw this error message dmesg /var /usr was not
properly dismounted, so what i did, is boot in single
user and do a fsck then when i boot the error is gone
i can do startx in normal
On Mon, 28 Jul 2003, marlon corleone wrote:
how do i boot graphically in fluxbox?
im booting up fluxbox in startx method, if i want to
boot it in graphical mode, should i COMMENT this
entry:
exec /usr/X11R6/bin/fluxbox in my .xinitrc and put
the entry in .xsession, is that all i have to
On Mon, 28 Jul 2003, marlon corleone wrote:
startx wont load anymore running it as root. the
problem started when i got a improper shutdown, and
when i reboot
i saw this error message dmesg /var /usr was not
properly dismounted, so what i did, is boot in single
user and do a fsck then when
marlon corleone wrote:
startx wont load anymore running it as root. the
problem started when i got a improper shutdown, and
when i reboot
i saw this error message dmesg /var /usr was not
properly dismounted, so what i did, is boot in single
user and do a fsck then when i boot the error is gone
i
On Mon, Jul 28, 2003 at 10:19:49PM -0700 or thereabouts, Charlie Schluting wrote:
On Mon, 28 Jul 2003, marlon corleone wrote:
how do i boot graphically in fluxbox?
im booting up fluxbox in startx method, if i want to
boot it in graphical mode, should i COMMENT this
entry:
exec
Hello there,
please, what RAID controller for ATA HDDs should I use in my new fileserver.
There will be run 4.8 with samba (for Win clients) and netatalk (for Mac
clients). I'm looking for some, which are officialy supported by FreeBSD,
without any special requirements.
I'd like to use RAID 5,
90 matches
Mail list logo
