Hi! From time to time our moderately loaded Squid 2.6.3 (~500
simultaneous clients, ~5000 req/min) stops responding all of a sudden,
its status being 'zoneli' according to top(1), and nothing short of a
machine reboot can bring it back to life. I think it's the growing load
on the box that
On 11/27/06, admin [EMAIL PROTECTED] wrote:
Hi! From time to time our moderately loaded Squid 2.6.3 (~500
simultaneous clients, ~5000 req/min) stops responding all of a sudden,
its status being 'zoneli' according to top(1), and nothing short of a
machine reboot can bring it back to life.
It's
Matthias Fechner wrote:
Hi,
i tried to get smtp-auth against the pass working but it is not
work. I must add users with saslpasswd2 to the sasldb but I want to
auth my smtp users with there normal password without the need to
add them to an additional db.
What I did is:
Installed
Hi all.
I have Red Hat Linux 9 running on my server with HDD Western Digital
WD2500JB (250 GB IDE). I'd like to move to FreeBSD 6.1.
During install from CD setup doesn't recognize geometry of my HDD (it
says 484521/16/63 is wrong geometry and switches it to 30401/255/63, but
after that still
Hi all,
I'm trying to install freebsd 6.1 and the installation hangs while
creating the root filesystem.
I have a Silicon Image 3512 RAID controller configured as a RAID 1 with
two 250GB maxtor drives. I'm using the amd64 distribution on a Pentium D
machine (with a asus P5B motherboard).
The last
Rainer Alves wrote:
Rainer Alves wrote:
Scot Hetzel wrote:
I'm trying to upgrade my ndis driver from version 3.100.64.0 to
4.40.19.0, but when I try to load the driver I get a Fatal trap 12
error.
[...]
However under FreeBSD + NDIS, the led is always red and the chip is
never properly
Hello,
I have enabled the support for LSI SAS1068 controller with 4.11
Release, and i compiled the kernel with chnages, it compiles with some
work arounds. When booting it successfully detects the LSI controller.
I will tell my system config
My system is HP Proliant DL380G4, and i have one
On 11/27/06, Klim [EMAIL PROTECTED] wrote:
Hi all,
I'm trying to install freebsd 6.1 and the installation hangs while
creating the root filesystem.
I have a Silicon Image 3512 RAID controller configured as a RAID 1 with
two 250GB maxtor drives. I'm using the amd64 distribution on a Pentium D
Hello list,
Well i got a Netgear WG511T (108Mbps PCMCIA Card), on an IBM laptop
(Thinkpad 600X) running FreeBSD-6.0..
it was supposed that since the card has an Atheros chipset it would be
supported from scratch
but even though, i can't even make drivers with ndisgen, getting an error
like:
I am truing to get SSI working on a site I am building. I thought I had
the 'httpd.conf' file properly configured.
Following some directions I got off of a web site, I created a basic
'index.shtml' file and placed this in it:
!--#echo var=DATE_LOCAL --
It doesn't seem to be working. Either the
On Mon, Nov 27, 2006 at 01:10:16PM +0200, Dima wrote:
Hi all.
I have Red Hat Linux 9 running on my server with HDD Western Digital
WD2500JB (250 GB IDE). I'd like to move to FreeBSD 6.1.
During install from CD setup doesn't recognize geometry of my HDD (it
says 484521/16/63 is wrong
Informativa ai s= ensi dell'articolo 13 del codice privacy per
richiesta consenso.
Gentili Signore Signori,
Le Vinali di Fiume Veneto (Friuli) propone = la fornitura diretta di
Grandi Vini Italiani.
Le chiediamo quindi il= suo consenso preventivo ad informarla su
On Mon, Nov 27, 2006 at 10:52:10AM -0500, Gerard Seibert wrote:
I am truing to get SSI working on a site I am building. I thought I had
the 'httpd.conf' file properly configured.
Following some directions I got off of a web site, I created a basic
'index.shtml' file and placed this in it:
Hello, Everybody
Well, here is what I am doing:
ls -l /usr/local/etc/rc.d
total 30
-r-xr-xr-x 1 root wheel 4744 Nov 13 11:38 apache22
-r-xr-xr-x 1 root wheel 673 Nov 13 14:27 clamav-clamd
-r-xr-xr-x 1 root wheel 722 Nov 13 14:27 clamav-freshclam
-r-xr-xr-x 1 root wheel 1057 Nov 13
Informativa ai s= ensi dell'articolo 13 del codice privacy per
richiesta consenso.
Gentili Signore Signori,
Le Vinali di Fiume Veneto (Friuli) propone = la fornitura diretta di
Grandi Vini Italiani.
Le chiediamo quindi il= suo consenso preventivo ad informarla su
Hi
I've installed freebsd 6.1 on an old pc on which I've configured several
services. Everything worked fine since last week when the motherboard died.
I've replaced the mobo and found that now the acpi could work (with the old
motherboard
the installation disabled the acpi at boot since the
On Mon, Nov 27, 2006 at 01:10:16PM +0200, Dima wrote:
Usually, with FreeBSD, you just ignore those geometry messages.
This should be especially true if you plan to use the whole disk
for FreeBSD.The geometry that is reported is virtual and does
not really mean anything for you.Don't
On Mon, Nov 27, 2006 at 06:30:43PM +0200, Gregory Edigarov wrote:
Hello, Everybody
Well, here is what I am doing:
ls -l /usr/local/etc/rc.d
total 30
-r-xr-xr-x 1 root wheel 4744 Nov 13 11:38 apache22
-r-xr-xr-x 1 root wheel 673 Nov 13 14:27 clamav-clamd
-r-xr-xr-x 1 root wheel
On Mon, Nov 27, 2006 at 06:58:32PM +0200, Dima wrote:
On Mon, Nov 27, 2006 at 01:10:16PM +0200, Dima wrote:
Usually, with FreeBSD, you just ignore those geometry messages.
This should be especially true if you plan to use the whole disk
for FreeBSD.The geometry that is reported is
Gregory Edigarov wrote:
Hello, Everybody
Well, here is what I am doing:
ls -l /usr/local/etc/rc.d
total 30
-r-xr-xr-x 1 root wheel 4744 Nov 13 11:38 apache22
-r-xr-xr-x 1 root wheel 673 Nov 13 14:27 clamav-clamd
-r-xr-xr-x 1 root wheel 722 Nov 13 14:27 clamav-freshclam
On Monday November 27, 2006 at 11:03:01 (AM) Jerry McAllister wrote:
Which version of Apache are you using?
I am having a somewhat similar issue in Apache 2.2 - on pages I
had working in Apache 1.3.xxx and haven't had time to try and solve
it yet.So, I would be interested in hearing any
Hi there;
Everything was working fine. Then I did a portupgrade -Rrv on KDE.
At first, everything seemed fine but everytime I tried to start an https
conecction I get this:
An error occurred while loading https://www.whatever.com.br:
The process for the https://www.whatever.com.br protocol
On Monday 27 November 2006 10:30, Gregory Edigarov wrote:
Hello, Everybody
Well, here is what I am doing:
ls -l /usr/local/etc/rc.d
total 30
-r-xr-xr-x 1 root wheel 4744 Nov 13 11:38 apache22
-r-xr-xr-x 1 root wheel 673 Nov 13 14:27 clamav-clamd
-r-xr-xr-x 1 root wheel 722 Nov
On Monday 27 November 2006 11:02, Jerry McAllister wrote:
On Mon, Nov 27, 2006 at 06:30:43PM +0200, Gregory Edigarov wrote:
Hello, Everybody
Well, here is what I am doing:
ls -l /usr/local/etc/rc.d
total 30
-r-xr-xr-x 1 root wheel 4744 Nov 13 11:38 apache22
-r-xr-xr-x 1 root
Directories are only shrunk when a file is created and the slack
directory space can be trivially truncated. This is to avoid useless
compaction during rm -rf-style activities of a directory that will
just be deleted anyway. Just create a dummy file with touch and the
directory will shrink
On Mon, Nov 27, 2006 at 06:58:32PM +0200, Dima wrote:
Hmmm. I am presuming you are booted from an install CD.
Yes, I'm booting from install CD.
By the way there are some error messages regarding this on Ctrl+Alt+F2
(during install), but they say nothing to me:
ad0: WARNING - READ_DMA UDMA
On Monday 27 November 2006 11:41, Mario Lobo wrote:
Hi there;
Everything was working fine. Then I did a portupgrade -Rrv on KDE.
At first, everything seemed fine but everytime I tried to start an https
conecction I get this:
An error occurred while loading https://www.whatever.com.br:
That is an issue with the sasl configuration. sasl can be configured to
read passwords from different locations, including a database. You may
need to reconfigure sasl or even rebuild it.
-Derek
At 09:20 PM 11/26/2006, Matthias Fechner wrote:
Hi,
i tried to get smtp-auth against
Hi there;
Everything was working fine. Then I did a portupgrade -Rrv on KDE.
At first, everything seemed fine but everytime I tried to start an https
conecction I get this:
An error occurred while loading https://www.whatever.com.br:
The process for the https://www.whatever.com.br protocol
Hi,
A few weeks ago i installed FreeBSD on my IBM T40 laptop. After running
it on my server for about a year with great success.
And everything seems to work great, except i cant join my wireless network
when i encrypt it. When I set my NorthQ routers wireless security settings
to none, I get an
On 11/27/06, Dan Nelson [EMAIL PROTECTED] wrote:
In the last episode (Nov 27), Peter Schuller said:
Observe:
hyperion# ls -la
total 61634
drwxr-xr-x 2 xxx yyy 63047168 Nov 18 21:33 .
drwxr-xr-x 6 xxx yyy 512 Oct 8 16:39 ..
hyperion# find .
.
hyperion#
The one special
On Monday 27 November 2006 18:15, Lane wrote:
UGH! Just went through it yesterday!
rebuild and reinstall /usr/ports/x11/kdelibs3 and it should work.
lane
Yeah !!
Thanks Lane, I'm doing it right now !
--
//| //|
// |// |
// // |
// //
--
[EMAIL
*** HOW-TO: FreeBSD + Asus V2-AH2 + SamSung SyncMaster 204bw ***
Short answer: FreeBSD 6.2 i386
Phew, I spent a better part of the Thanksgiving weekend getting my new
machine up and running. Hopefully, these notes will help out other
people with Axux V2-AH2 barebones systems.
Motherboard
Hey list..
status: associated
ssid netgear15 channel 11 bssid mac:address
but it doesnt activate..
it keeps the association thing on...
any solutions?
___
freebsd-questions@freebsd.org mailing list
I was wondering if anyone knows if Maia Mailguard is in the 'ports'
system? I cannot seem to locate it. Perhaps it is under a slightly
different name or something.
--
Gerard
[EMAIL PROTECTED]
I have a terrible headache, I was putting on toilet water and the lid fell.
I know some of you have labeled me a troll. I don't think I am a troll in
pointing out to others who may be interested in FreeBSD not to look to it. I
believe just liking freebsd despite it's issues isn't advantageous to the
community.
I've documented the problems with mozilla.
Now,
I have written a script to determine if processes are running. I am
using, as an example,
ps -ax | grep -c postgrey
Ocassionally, I am receiving a notification a process is not running (and
it varies which process I receive notifications for). And, when checking,
the process actually is
On Mon, Nov 27, 2006 at 12:36:04PM -0800, probsd org wrote:
I know some of you have labeled me a troll. I don't think I am a troll in
pointing out to others who may be interested in FreeBSD not to look to it. I
believe just liking freebsd despite it's issues isn't advantageous to the
probsd org wrote:
I know some of you have labeled me a troll. I don't think I am a troll in
pointing out to others who may be interested in FreeBSD not to look to it. I
believe just liking freebsd despite it's issues isn't advantageous to the
community.
I've documented the problems
In the last episode (Nov 27), [EMAIL PROTECTED] said:
I have written a script to determine if processes are running. I am
using, as an example,
ps -ax | grep -c postgrey
Ocassionally, I am receiving a notification a process is not running
(and it varies which process I receive
Hello
I have a server I am using as a load balancer that
has multiple ports. I have set sysctl
net.link.ether.inet.log_arp_movements=0 so I could
have the multiple ports on the same lan. However, I
need to make sure that what comes in via one port/IP
also goes out the same port/IP address.
I
On Mon 27 Nov 20:46, [EMAIL PROTECTED] wrote:
I have written a script to determine if processes are running. I am
using, as an example,
ps -ax | grep -c postgrey
Are you aware of pgrep(1) ?
Cheers,
Nick.
--
___
Both of the applications you've mentioned problems with use GTK and other
GNOME-related libraries. About a month ago the default location for gnome
libraries was switched from /usr/X11R6 to /usr/local in conjunction with a
GNOME update and presumably in an effort to modernize/standardize the
On Wed, 22 Nov 2006, Christopher Sean Hilton wrote:
In all likelyhood FreeBSD needs some quirk to work with the IDE bridge
chipset in your enclosure. I have noticed that the plain jane enclosures
seem to work fine but the ones with special features fail. In particular
I have an enclosure with
In the last episode (Nov 27), [EMAIL PROTECTED] said:
I have written a script to determine if processes are running. I am
using, as an example,
ps -ax | grep -c postgrey
Ocassionally, I am receiving a notification a process is not running
(and it varies which process I receive
I seem to be having the same problem described in
http://www.freebsdforums.org/forums/showthread.php?t=22211, with no
system calls shown by truss.
Unfortunately, the fix of upgrading perl from 5.6 to 5.8 doesn't apply
to me: my version of Perl is already at 5.8.8, and probably was from
the
I have problems compiling the stock expect, well actually it is
with the dependencies for expect tcl84 and tk84, on 6.2-RC1.
How do I go about determining outstanding issues for any given port?
Thanks.
Jim
___
freebsd-questions@freebsd.org mailing
In the last episode (Nov 27), [EMAIL PROTECTED] said:
In the last episode (Nov 27), [EMAIL PROTECTED] said:
I have written a script to determine if processes are running. I am
using, as an example,
ps -ax | grep -c postgrey
Ocassionally, I am receiving a notification a process is
Secondly, I needed to either expressly place the file on the command
line or else the SSI would not display,
I don't understand what you mean.
or chmod the file to 0755. I
choose to do the later obviously since it is an index file.
I run a site full of SSI, files are mode 644 and it is
[EMAIL PROTECTED] wrote:
I have written a script to determine if processes are running. I am
using, as an example,
ps -ax | grep -c postgrey
Ocassionally, I am receiving a notification a process is not running (and
it varies which process I receive notifications for). And, when checking,
the
On 16 November 2006, at 01:34, George Allan wrote:
On Thu, Nov 16, 2006 at 08:58:53AM +0300, g wrote:
Is there any one model or product that would be better for Freebsd 6
(as this is my day in day out operating system).
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
Any
I am attempting to setup a secondary ide drive. I have configured the
entire 305MB drive for storage. I used /stand/sysinstall and -it-
issued the command ;
/bin/sh -c newfs -b 16384 -f 2048 /dev/ad2s1e
which seems very disk intensive and is taking a long time. I am wondering
if this is right.
On Mon, 27 Nov 2006, Robert Huff wrote:
Warren Block writes:
Could someone running a native Seamonkey
Yo!
verify that this isn't just my system:
With Javascript enabled (Edit/Preferences/Advanced/Scripts And
Plugins/Enable JavaScript for Navigator checked) go to
Hello All,
Is there any ssh over http implementation available for freebsd?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
How do I go about determining outstanding issues for any given port?
You can search existing PRs here:
http://www.freebsd.org/cgi/query-pr-summary.cgi?query
If the port itself is broken, it will be marked as such, but those
ports compile fine on my 6.2-RC1 system, so it's unlikely they are
Is anyone working on a Beryl or Compiz port for freebsd?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Warren Block writes:
Works OK here. Sending page by separate e-mail.
Could you post your /var/db/ports/seamonkey/options file?
# Options for seamonkey-1.0.b
_OPTIONS_READ=seamonkey-1.0.b
WITH_MAILNEWS=true
WITH_COMPOSER=true
WITH_LDAP=true
WITH_CHATZILLA=true
Hi All
I'm a master student and I'm currently working on a project, in order to
complete the report, I need to find out the information about the harddisk
data distribution status, such as the number of files on each cylinder
group, the occupied status on each cylinder, the files layout on
On Monday 27 November 2006 23:18, Dima wrote:
On Mon, Nov 27, 2006 at 06:58:32PM +0200, Dima wrote:
trimmed
By the way there are some error messages regarding this on Ctrl+Alt+F2
(during install), but they say nothing to me:
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request)
Greetings, I have a fileserver I installed this nic on but the device
fails to show in ifconfig
uname:
5.5-STABLE FreeBSD 5.5-STABLE #2: Sun Oct 29 14:12:46 PST 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/FRODO
Except from FRODO kernel file (generic plus some):
# PCI Ethernet NICs that use the
I have been running Apache (apache+mod_ssl-1.3.34+2.8.25_1) for some
time with php5 and extensions to support PostgreSQL 8.0.9. After
upgrading to PostgreSQL 8.1.15 I find that Apache crashes if the
php5 PostgreSQL extension is installed. I have updated Apache to
apache+mod_ssl-1.3.37+2.8.28
I have compiled and installed mpd 4.0b5
on my PC with FreeBSD 6.1-RELEASE.
Then I created the next files:
# mpd.conf
default:
new ukrtelecom dsl
set auth authname [EMAIL PROTECTED]
set iface route default
open iface
# mpd.links
dsl:
set link type pppoe
On Mon, Nov 27, 2006 at 09:48:46PM -0800, James Long wrote:
I have been running Apache (apache+mod_ssl-1.3.34+2.8.25_1) for some
time with php5 and extensions to support PostgreSQL 8.0.9. After
upgrading to PostgreSQL 8.1.15 I find that Apache crashes if the
php5 PostgreSQL extension is
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
probsd org said the following on 26.11.2006 22:20:
Simon Phoenix [EMAIL PROTECTED] wrote:
On Fri, Nov 24, 2006 at 03:41:11PM -0800, probsd org wrote:
I'm a long time proponent of FreeBSD as a server. For a long time I've
really wanted a
On 11/27/06, Gerard Seibert [EMAIL PROTECTED] wrote:
I was wondering if anyone knows if Maia Mailguard is in the 'ports'
system? I cannot seem to locate it. Perhaps it is under a slightly
different name or something.
Try to search in http://www.freshports.org/
On 11/27/06, Frozen [EMAIL PROTECTED] wrote:
Hey list..
status: associated
ssid netgear15 channel 11 bssid mac:address
but it doesnt activate..
it keeps the association thing on...
any solutions?
check
On 11/28/06, hackmiester (Hunter Fuller) [EMAIL PROTECTED] wrote:
On 16 November 2006, at 01:34, George Allan wrote:
On Thu, Nov 16, 2006 at 08:58:53AM +0300, g wrote:
Is there any one model or product that would be better for Freebsd 6
(as this is my day in day out operating system).
I am going to buy an UPS.
What should I know and take into account to choose a proper one?
Elisej Babenko
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
Hi,
I'm trying to get a linksys eg1032 gigabit ethernet card (version 3) working
under freebsd 5.3. This appears to be an RTL8169S based card.
When I build a kernel with the re device (and miibus) enabled, the card is
not detected. I also tried building a GENERIC kernel to sanity check my
69 matches
Mail list logo
