Hi
I would like to hear from someone who has successfully installed this card on
freebsd.
I have looked in the usual places for info. I have so far been unable to get
freebsd to boot when this card is installed.
Thanks
David
___
Hello,
I'm running FreeBSD 6.1 with xorg version 6.9.0. I want to make the mouse
cursor invisible. Can you help me please ?
Thank you :)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Hello there.
I'm not good in eanglish.
I have bought Samsung SATA-II HDD 80G 7200. I wanted to install
FreeBSD 6.1 (i386) on it, but when i try to, installation is going
very very slow. I thought that the problem is with my CD, but i have
succesfully installed FreeBSD on my IDE HDD from that CDs.
I have been running denyhosts to stop attacks on my ssh port.
The attacks continue after protection is put in place.
Here is what I have in the tail of my /etc/hosts.allow
as per the installation instructions;
-
...snip
sshd : /etc/hosts.deniedssh : deny
sshd : ALL :
Hi all,
I'm using the 6.1 release of FreeBSD. Just installed the OS on a 160GB
SATA harddisk. While installing a port halfway I get this series of
error messages:
ad4: TIMEOUT - WRITE_DMA48 retrying (1 retry left) LBA=283609215
ad4: TIMEOUT - WRITE_DMA48 retrying (0 retries left)
First post to the list!
I have a CD-rom drive attached to an Intel Server but required some data
from a DVD.
So I attached my USB DVD-rom drive and got the following in dmesg after
I disconnected and reconnected the device :
umass0: at uhub4 port 4 (addr 2) disconnected
(cd0:umass-sim0:0:0:0):
Am Mittwoch, 20. Dezember 2006 16:59 schrieb Warren Block:
On Tue, 19 Dec 2006, Warren Block wrote:
[fixing screen wrap problem]
java -cp acrobat.jar com.adobe.acrobat.Viewer
Exception in thread main java.lang.NoClassDefFoundError:
com/apple/mrj/MRJAboutHandler
It doesn't fix that,
First post to the list!
I have a CD-rom drive attached to an Intel Server but required some data
from a DVD.
So I attached my USB DVD-rom drive and got the following in dmesg after
I disconnected and reconnected the device :
umass0: at uhub4 port 4 (addr 2) disconnected
(cd0:umass-sim0:0:0:0):
Hi all
I want to install php with apache in freebsd unix. I installed apache2 and
php 5.2.0. But php file not working and also i want to know the method of
running.
Whether browser and x windows are needed for running apache and php. If
suppose where to find out the tar file and how to
On Wed, Dec 20, 2006 at 11:23:04AM +, Robin Becker wrote:
I'm looking for some advice on using one of our existing freebsd 6.x
servers as
a mail server for a small number (20) of users.
Our existing provider gives us
1) pop3/IMAP for reading mail
2) SMTP for sending, but we need to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I am having an issue with NFS and SMB on two FreeBSD machines.
The particularly strange thing is that this problem didn't occur when I
ran Gentoo Linux on PC_2.
Setup:
1. PC_1 and PC_2 share with each other via NFS.
2. Both PCs run
On Thu, 21 Dec 2006, Stevan Tiefert wrote:
maybe a stupid question :-) Should I save that in a diff-file and use it
with patch maybe?
Yes, save it as patch.diff in the AcrobatViewer directory and use
'patch patch.diff'.
-Warren Block * Rapid City, South Dakota USA
Hello,
I think the FreeBSD team should have a special page
containing a table of all releases and beside these
releases is marked STABLE or CURRENT.
Instead of having to refer which is STABLE and which
from the CURRENT and sometimes it gets a bit tricky
and confusing.
Best Regards
Fareed
It has been a while since I setup Squirrelmail, but it sounds like your web
configuration may be the problem. Check your httpd.conf. Also be sure the
correct httpd.conf is being used.
-Derek
At 12:10 PM 12/20/2006, Dave wrote:
Hello,
I'm trying to configure squirrelmail on a
I can't say if it will read your other file, I use explicit lines such as:
sshd: 192.168.1.20 : allow
sshd: 82.165.182.220 : deny
sshd: ALL: DENY
This allows ONLY access from good known IP's. You will still see the
attempts in the security logs.
-Derek
At 11:04 PM 12/20/2006,
Z. Wade Hampton [EMAIL PROTECTED] writes:
Hello to all,
Not long ago, I ran cvsup successfully.
In the example cvs-supfile, the following opening lines exist:
# base=/var/db
# This specifies the root where CVSup will store information
# about the collections you
Hello All:
We have just implemented an NFS server behind a POP cluster of 3
servers. Incoming mail to the PF front-end box is at about 8 Mb/sec.
Communication between each of the POP servers to and from the NAS is
averaging about 70 Mb/sec.
Can anyone tell me if this is normal overhead for NFS
I use Freebsd6.1.
I want to give a symbolic link for a directory with ln -s as below;
cd /
ln -s /var/tmp/ tmp2
ls -l /var/tmp
lrwxr-xr-x 1 root wheel 14 Dec 21 10:12 tmp - /var/tmp
I change write of user and group but i can't that.
chmod 777 tmp2
ls -l tmp2
lrwxr-xr-x 1 root
Dear mailing list,
First of all, thanks you for the thread X server remote login I read
it and configured a FreeBSD as follows:
# cd /usr/ports/x11/xorg make install clean
# cd /usr/ports/x11/wdm make install clean
# cd /usr/ports/x11-wm/fluxbox-devel make install clean
Then I configured
On Wed, 20 Dec 2006 18:16:38 +
yes I understood that part :)
but I have a bunch of other things dependent on perl so I guess I
would need to rebuild all of those as well.
And I still need to find out what options were used in building perl.
Prebuilt packages are built without any port
On Wed, 20 Dec 2006 06:36:28 -0900
Beech Rintoul [EMAIL PROTECTED] wrote:
Make sure you use the spamassassin binary (spamd) or it can get very
slow.
Running spamd avoids starting a new perl process on each email by
running one as a daemon - it's still perl. I can't see it making much
Ok, i changed my original rules. I'm going to use both the ruleset you
recommended
and these ones (not at the same time though :). And see which one gives me the
least trouble.
greetings,
jurjen.
#!/bin/sh
ipfw -q flush
cmd=ipfw -q add
ks=keep-state
oif=ath0
#sort in en out packets
$cmd
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
David Banning wrote:
I have been running denyhosts to stop attacks on my ssh port.
The attacks continue after protection is put in place.
Here is what I have in the tail of my /etc/hosts.allow
as per the installation instructions;
Hi,
I admin a small web hosting server running 6.1-RELEASE-p10, and I have PHP4
working as a module with Apache 2.0.59. I have a PHP app that doesn't work
with PHP4 and requires PHP5, along with the mysql and gd extensions. Is
there a way to get PHP5 to run alongside PHP4 short of installing
On 2006-12-20 18:37, Robin Becker [EMAIL PROTECTED] wrote:
I'm trying to make world for a jail build following the recipe in
http://www.onlamp.com/pub/a/bsd/2003/09/04/jails.html
First off I started by updating the src tree. I copied
/usr/share/examples/cvsup/stable-supfile edited the host
Adrian Gschwend wrote:
I'm a bit lost now, especially because I cannot even disable anything in
the kernel like this. So any hints would be appreciated.
Ok got further with FreeBSD 6.2 RC1, it works and the system is up :-)
cu
Adrian
___
On 12/20/06, Abdullah Al-Marrie [EMAIL PROTECTED] wrote:
Hello guys,
I have problem with my laptop Acer Aspire 5102 WLMi which has AMD
Turion™ 64 X2 dual-core TL-50 1.6 GHz with 1.5 GB of ram.
I'm running i386 6.2-RC1 upgraded to 6.2-PRELEASE via RELENG6 tag
since I don't have more than 4 GB
On Dec 20, 2006, at 7:45 PM, Benjamin Kudria wrote:
Hi,
I admin a small web hosting server running 6.1-RELEASE-p10, and I
have PHP4
working as a module with Apache 2.0.59. I have a PHP app that
doesn't work
with PHP4 and requires PHP5, along with the mysql and gd
extensions. Is
there
I just set up one of my servers as a secondary dns. I put the proper ip
address in the master zones allow transfers. The master is working properly
because the other secondary (afraid.org) is able to x-fer. However I'm
getting a lot of these messages on my secondary:
Dec 21 01:03:20 stargate
hey all.
i found a problem just now.
i added this user(in wheel group)with sysinstall when i install freebsd.
$ id
uid=1001(user) gid=0(wheel) groups=0(wheel), 5(operator), 69(network)
$ pw group show wheel
wheel:*:0:root
i can't see it in the wheel group users list?
but when i add a new
On 12/20/06, Terabyte Pete [EMAIL PROTECTED] wrote:
7:04 AM, Wednesday, December 20, 2006
rant
man, what are you smoking?
U know, opposite of those oil companies - buying up the rail mass transit,
so they could DESTROY it, rip everybody off with cars gas they don't
need. It would be
Am Mittwoch, 20. Dezember 2006 11:38 schrieb Garrett Cooper:
Warren has a point. If it isn't supported by Adobe anymore, the thing
with it being broken is pretty much moot.
Is there a specific reason why you wanted to look at PDFs with a java
app instead of a binary?
-Garrett
First: If it
On 20/12/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
On 12/20/06, Terabyte Pete [EMAIL PROTECTED] wrote:
U know, opposite of those oil companies - buying up the rail mass transit,
so they could DESTROY it, rip everybody off with cars gas they don't
need. It would be nice if more people
..
I fixed up my /usr/src tree to be latest RELENG_6_0 in line with my
machine and ran
cd /usr/src
make world DESTDIR=/usr/jails/mailserver
however, this seems to produce a lot of stuff in /usr/obj (the normal
make world destination). Eventually the make fails with this message
lveax wrote:
hey all.
i found a problem just now.
i added this user(in wheel group)with sysinstall when i install freebsd.
$ id
uid=1001(user) gid=0(wheel) groups=0(wheel), 5(operator), 69(network)
$ pw group show wheel
wheel:*:0:root
i can't see it in the wheel group users list?
Is there UNIX analog of ftp command pls, i. e. ls | less ?
Elisey Babenko
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Le Wed, 20 Dec 2006 11:06:32 -0800,
Nora Lavelle [EMAIL PROTECTED] a écrit :
I'm new to FreeBSD and am trying to implement a kickstart
environment. I have everything working except I want to modify
the /etc/rc.conf postinstall. Each time I do after the reboot the
rc.conf settings go back to
Robin Becker wrote:
I'm looking for some advice on using one of our existing freebsd 6.x
servers as
a mail server for a small number (20) of users.
Our existing provider gives us
1) pop3/IMAP for reading mail
2) SMTP for sending, but we need to read mail before using smtp; I guess
this
Hi everyone,
I have a new Acer Aspire 5100 laptop and a FreeBSD 6.2-RC1 installed. When I
shutdown the machine by shutdown -p now command, the machine will hang
after printing the All Buffers Synced. Uptime: xx:xx messages.
If I use the reboot command to reboot the machine, i got the same
--On torsdag, december 21, 2006 00.29.10 +0900 Shigeaki Tagashira
[EMAIL PROTECTED] wrote:
Palle Girgensohn wrote:
--On söndag, december 17, 2006 01.06.24 +0900 Shigeaki Tagashira
[EMAIL PROTECTED] wrote:
I have the same one. And if_nfe works well on it, in both FreeBSD
6.2-PRERELEASE
On Tue, Dec 19, 2006, [EMAIL PROTECTED] wrote:
Is there UNIX analog of ftp command pls, i. e. ls | less ?
There's a Windows analog of the UNIX ftp command (pretty much
everything from DOS 2.0 on was taken from UNIX starting with the
hierarchical file system).
Bill
--
INTERNET: [EMAIL
On Wednesday 20 December 2006 09:38, Terabyte Pete wrote (Nothing of value):
7:04 AM, Wednesday, December 20, 2006
chop
U know, opposite of those oil companies - buying up the rail mass transit,
so they could DESTROY it, rip everybody off with cars gas they don't
need. It would be nice
On Thursday 21 December 2006 20:42, Janvier Pang wrote:
I've tried to disable the ACPI function on start up, the system will crash
and reboot.
Could anybody kindly help or give some hints to solve this shutting down
problem?
Comment out device ehci in your kernel config: you'll see the
Hello,
Well, You will always see the attempts in security logs.
As Derek Wrote, you have to allow your IP and deny the rest.
Also, you may set in /etc/ssh/sshd_config
a line in the bottom of the file which reads
AllowUsers YOUR_USER_HERE
In this case, you will make sure your ip
On Wed, 2006-Dec-20 15:04:31 -0800, Scot Hetzel wrote:
Had the same problem where powerd would hang my HP Pavilion dv8000
system. I worked arround the problem by using the following in
rc.conf:
powerd_enable=YES
powerd_flags=-a maximum -b maximum
Of course this makes powered do nothing when on
In the last episode (Dec 19), [EMAIL PROTECTED] said:
Is there UNIX analog of ftp command pls, i. e. ls | less ?
Yes, ls | less is the way to do it. You can add a shell alias to
make it easier to type:
alias pls=ls -l | less
That's for bourne-style shells (sh,bash,zsh). for csh, you would
On Tue, Dec 19, 2006 at 09:53:59PM +0200, [EMAIL PROTECTED] wrote:
Is there UNIX analog of ftp command pls, i. e. ls | less ?
the BSD version of ftp(1) has the pls command (pdir is also a synonym to it).
--
Raymond Pasco [EMAIL PROTECTED]
Mobile: +1 860 335 5022 (SMS only please)
By receiving
You didn't say what versions of FreeBSD or bind you are running. But here
is what I have running . . .
named.conf syntax can be fussy. Here is how I have mine setup:
Master
running the ip 192.168.1.40
zone foo.net {
type master;
file m/foo.net;
On Thu, Dec 21, 2006 at 12:45:35PM -0600, Dan Nelson wrote:
In the last episode (Dec 19), [EMAIL PROTECTED] said:
Is there UNIX analog of ftp command pls, i. e. ls | less ?
Yes, ls | less is the way to do it. You can add a shell alias to
make it easier to type:
alias pls=ls -l | less
In the last episode (Dec 21), [EMAIL PROTECTED] said:
On Thu, Dec 21, 2006 at 12:45:35PM -0600, Dan Nelson wrote:
In the last episode (Dec 19), [EMAIL PROTECTED] said:
Is there UNIX analog of ftp command pls, i. e. ls | less ?
Thank you for response, but I know how to write aliases and
Am Mittwoch, 20. Dezember 2006 06:12 schrieb Warren Block:
As to your original question, there are several problems with with
escaping and quoting in the AcrobatViewer shell script. That whole
script is a problem. What it's supposed to do is set up an
environment to actually run the Java
On 12/21/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
On Thu, Dec 21, 2006 at 12:45:35PM -0600, Dan Nelson wrote:
In the last episode (Dec 19), [EMAIL PROTECTED] said:
Is there UNIX analog of ftp command pls, i. e. ls | less ?
Yes, ls | less is the way to do it. You can add a shell
On Wed, Dec 20, 2006 at 03:06:34PM -0800, Terabyte Pete wrote:
It's all true U know it.
What's your title - head 'driver instal complicator'???
HAHAHAHAHAHA
Enjoy your peddling I.T. services. Would all B so unnecessary if U
actually gave a shit about making things MENU DRIVEN so a
On Dec 20, 2006, at 6:39 PM, Jerry McAllister wrote:
On Wed, Dec 20, 2006 at 03:06:34PM -0800, Terabyte Pete wrote:
It's all true U know it.
What's your title - head 'driver instal complicator'???
HAHAHAHAHAHA
Enjoy your peddling I.T. services. Would all B so unnecessary if U
actually
On Thu, 21 Dec 2006, Eric Kjeldergaard wrote:
To find the answer to this, you need only look at both of those solutions
and combine them. For instance...
alias pls=ls -l $@ | less
The csh/tcsh equivalent is
alias pls 'ls -l \!* | less'
-Warren Block * Rapid City, South Dakota USA
Does anyone have experience configuring ISAKMPD on FreeBSD? I'm trying to
get a tunnel built between FreeBSD 6.1 and OpenBSD 3.9, but am having
problems convincing the FreeBSD box to route traffic through the tunnel.
Here are the details:
Tunnel Mode Transport
A.B.C.D OpenBSD box external IP
On Wed, Dec 20, 2006 at 10:51:59AM -0800, Fareed Rizkalla wrote:
Hello,
I think the FreeBSD team should have a special page
containing a table of all releases and beside these
releases is marked STABLE or CURRENT.
Instead of having to refer which is STABLE and which
from the CURRENT and
Hello everyone,
Has anyone tried the IBM ServeRAID-8k SAS controller under
FreeBSD/i386 6.1-RELEASE ?
I can't find info about this particular model in the FreeBSD/i386
6.1-RELEASE Hardware Notes. I've found that the ServeRAID 6i/6M
controllers are supported by the ips(4) driver, but nothing
On Wed, 20 Dec 2006 15:18:07 +1000 Dimon wrote:
I have bought Samsung SATA-II HDD 80G 7200. I wanted to install
FreeBSD 6.1 (i386) on it, but when i try to, installation is going
As nobody has answered yet, I can advice you to try to install
FreeBSD 6.2-RC1. It contains _many_ fixes. Post the
pls directory
will give
ls -l | less directory
which is not what one want.
Try the following:
bourne shells:
alias pls='ls $* | less'
or for csh/tcsh:
alias pls 'ls $* | less'
Thanks,
Josh
___
freebsd-questions@freebsd.org mailing list
Is there software that will let me manage a 3Ware raid array while
FreeBSD is running?
Here is what I have:
FreeBSD 6.1
3Ware 7500-8 and 7500-4
hal
___
freebsd-questions@freebsd.org mailing list
hal wrote:
Is there software that will let me manage a 3Ware raid array while
FreeBSD is running?
Here is what I have:
FreeBSD 6.1
3Ware 7500-8 and 7500-4
hal
___
freebsd-questions@freebsd.org mailing list
On Dec 21, 2006, at 4:22 PM, Eric wrote:
hal wrote:
Is there software that will let me manage a 3Ware raid array while
FreeBSD is running?
Here is what I have:
FreeBSD 6.1
3Ware 7500-8 and 7500-4
check out the 3dm port
Thanks I will give it a try.
hal
Hello,
I didnot catch the first email however,
I had SATA HD installation case, and it was slow during install.
I relized its SATA problem, because when i changed to IDE it works good.
anyway, i replaced the IDE to SATA back, and after the installation was
done,
i updated my FreeBSD 6.1R to
On 12/21/06, Terabyte Pete [EMAIL PROTECTED] wrote:
Snip
The OpenBSD Flaming List is down the hall, fourth door to the left.
--
Juha
http://www.geekzone.co.nz/juha
___
freebsd-questions@freebsd.org mailing list
Am Mittwoch, 20. Dezember 2006 11:38 schrieb Garrett Cooper:
Warren has a point. If it isn't supported by Adobe anymore, the thing
with it being broken is pretty much moot.
Is there a specific reason why you wanted to look at PDFs with a java
app instead of a binary?
-Garrett
First: If it
On Thursday 21 December 2006 18:01, hal wrote:
On Dec 21, 2006, at 4:22 PM, Eric wrote:
hal wrote:
Is there software that will let me manage a 3Ware raid array while
FreeBSD is running?
Here is what I have:
FreeBSD 6.1
3Ware 7500-8 and 7500-4
check out the 3dm port
Thanks I
Hello. I am from China and I'd like to contribute to wikipedia, but this
is not easy / possible because we cannot access wikipedia from inland
(the great firewall) and my usual method accesssing wikipedia (through
ssh -L 80:en.wikipedia.org:80 my_server_in_german) can allow me to visit
wikipedia
Hi all
I want to install php with apache in freebsd unix. I installed
apache2 and
php 5.2.0. But php file not working and also i want to know the
method of
running.
Whether browser and x windows are needed for running apache and
php. If
suppose where to find out the tar file and how
What the file .mail_aliases in home directory is intended for?
May I remove it?
Elisey Babenko
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On 12/20/2006 13:22, Jonathan Horne wrote:
... but not to worry, my backups are up to date.
but what im perplexed about is, my file system graph has never taken a hit
to show the amount of data that i think i lost. its nearly flatlined!
now, over the past few days, ive had some trouble with
В сообщении от Пятница 22 декабря 2006 00:27 Peter Jeremy написал(a):
On Wed, 2006-Dec-20 15:04:31 -0800, Scot Hetzel wrote:
Had the same problem where powerd would hang my HP Pavilion dv8000
system. I worked arround the problem by using the following in
rc.conf:
powerd_enable=YES
On Fri, Dec 22, 2006 at 11:59:59AM +0800, ? wrote:
Hello. I am from China and I'd like to contribute to wikipedia, but this
is not easy / possible because we cannot access wikipedia from inland
(the great firewall) and my usual method accesssing wikipedia (through
ssh -L
Dear mailing list,
First of all, thanks you for the thread X server remote login I read
it and configured a FreeBSD as follows:
# cd /usr/ports/x11/xorg make install clean
# cd /usr/ports/x11/wdm make install clean
# cd /usr/ports/x11-wm/fluxbox-devel make install clean
Then I
On Thu, Dec 21, 2006, [EMAIL PROTECTED] wrote:
What the file .mail_aliases in home directory is intended for?
May I remove it?
It's usually an aliases file for the mutt mailer.
Bill
--
INTERNET: [EMAIL PROTECTED] Bill Campbell; Celestial Software LLC
URL: http://www.celestial.com/ PO Box
Hi there,
I am looking for a recommendation for application that I can place on
one of my FreeBSD servers. It is a web-based calendar system that I can
schedule recurring email reminders that are automatically sent.
Any clues here?
Cheers,
Noah
Hi all
I have installed FreeBSD 6.0 unix recently. But I am not able to configure
network (internet).
I am having leased line with Realtek gigabit ethernet NIC. When I try to
configure it is not showing the interface itself on sysinstall. Whether this
freeBSD support this card or else what I
--On December 22, 2006 10:13:09 AM +0530 Girish Venkatachalam
[EMAIL PROTECTED] wrote:
I think you need tor
http://tor.eff.net
I think you mean http://tor.eff.org/
Paul Schmehl ([EMAIL PROTECTED])
Senior Information Security Analyst
The University of Texas at Dallas
On Thu, Dec 21, 2006 at 11:32:03PM -0600, Paul Schmehl wrote:
I think you mean http://tor.eff.org/
Oops! Bummer!
I usually check the links before the send button but ...
Sorry about that.
regards,
Girish
--
Linux is for folks who hate Windoze.
FreeBSD is for folks who love UNIX.
OpenBSD
79 matches
Mail list logo