t; >
> > TIA,
>
> did you upgrade your ports tree?
>
> Try it on a freshly installed system that you have run a portupgrade on.
>
> If that doesen't work I have notes that may help.
I did an update before trying this, yeah.
--
Wayne Pascoe
___
oment :(
If not from ports, what other ways of installing IMP / Horder are
advised ?
TIA,
--
Wayne Pascoe(gpg --keyserver www.co.uk.pgp.net --recv-keys 79A7C870)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/lis
l for users
that exist in /etc/passwd (not very many!), and am considering a
migration to Horde/IMP. Near as I can tell though it's not the webmail
client that matters, but the imap server. Does anyone know of an imap
server that will do 'virtual mailboxes' like vm-pop3d does ?
Than
definitive reference, that doesn't require
referencing twoo locations.
Regards,
--
Wayne Pascoe(gpg --keyserver www.co.uk.pgp.net --recv-keys 79A7C870)
It could be dangerous... A lot of killing...
and violence. You wanna come?
___
[EMAI
've checked the doc I used to do
this, and it wasn't mentioned. I'll submit something to the maintainer
tomorrow.
Now I just have to find some useful sample rulesets. It's been about 18
months since I touched ipfilter, and things seem to have changed a
little :)
--
Wayne Pasco
Stop in /usr/obj/usr/src/sys/WTP.
*** Error code 1
END OF ERROR MESSAGE
--
Wayne Pascoe(gpg --keyserver www.co.uk.pgp.net --recv-keys 79A7C870)
Mary had a crypto key, she kept it in
escrow, and everything that Mary said,
the Feds were sure to know.
_
On Tue, Jun 01, 2004 at 11:36:40PM -0600, flowers wrote:
> From: Wayne Pascoe
> > I've tried installing 5.2.1 on the machine and it still doesn't work.
> > Now though, it's even worse, as the em0 device doesn't work either.
> >
> > I get something alo
here.
I'm attaching pciconf.txt which is the output of my pciconf commands as
well as the dmesg from boot. Any enlightenment would be much
appreciated.
The motherboard is a Tyan S5102 Tomcat i875P according to my supplier
Thanks a lot for the help :)
--
Wayne Pascoe(gpg --keyserver w
hat...
It turns out that not only do you need the DefaultAddress option, you
also need to specify
SocketBindTight on
It's like saying
"Use this IP address"
"No, Seriously! Use this effing IP Address!"
Weird!
--
Wayne Pascoe(gpg --keyserver
parts...
I'm going to go for a 5.2.1 install on this box now, so I'll send the
output of that when I'm done.
Regards,
--
Wayne Pascoe(gpg --keyserver www.co.uk.pgp.net --recv-keys 79A7C870)
I have a very firm grasp on reality.
address and it appears to work.
Does anyone have any advice as to how I can get this working under
FreeBSD ? My supplier doesn't support FreeBSD but they do support Linux,
and they've said if it works under one, it should work under the other.
--
Wayne Pascoe(gpg --keyserver www.
want.
The reason I'm trying to get this working is that I need 2 different
config's on the same machine.
Thanks in advance,
--
Wayne Pascoe(gpg --keyserver www.co.uk.pgp.net --recv-keys 79A7C870)
Wageslaves - Who do you want to make rich
today?
_
one is running any of the following, and using mtx to control it,
please could you let me know...
ADIC LTO FastStor HVD LTO Ultrium Drive
Tanberg LTO2 Autoloader Ultrium Tape Library - External
Certance CL3200 LTO Ultrium Tape Library - Rackmount
HP MSL5030 1 Drive LTO Ultrium 230 Rackmount Tape Library
R
in /usr/ports/x11-toolkits/tk84/work/tk8.4.6/unix.
*** Error code 1
Any ideas on what might be wrong here ?
Thanks in advance,
--
Wayne Pascoe
Doing a linear scan over an associative array
is like trying to club someone to death with a
loaded Uzi. - Larry Wall
his didn't give
me a newer versoin either.
Can anyone please enlighten me as to the best way to build mrtg from
ports WITH all of its dependencies ?
thanks,
--
Wayne Pascoe
I'm only in this job until an opening comes up
in the fast food business...
__
On Thu, Apr 22, 2004 at 10:49:33AM -0500, Dan Nelson wrote:
> In the last episode (Apr 22), Wayne Pascoe said:
> > I'm trying to build mrtg from /usr/ports/net-mgmt/mrtg and it appears
> > to want to update gd
> >
> > The gd update is failing with the following err
eclared (first use in this
function)
*** Error code 1
Stop in /usr/ports/graphics/gd/work/gd-2.0.22.
*** Error code 1
Stop in /usr/ports/graphics/gd/work/gd-2.0.22.
*** Error code 1
Stop in /usr/ports/graphics/gd.
Any idea how to fix it ?
--
Wayne Pascoe
Everything to excess. To enjoy t
ver script is
running from cron at this time and find out what other modules it
requires.
HTH.
--
Wayne Pascoe
Bury me deep when there's no will to be
better than you! - Metallica
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mai
;ve used an entire range here, you could use a
single IP range. Combining IP addresses with via interface statements
lets you be pretty flexible :)
Hope this helps some ?
--
Wayne Pascoe
BSD is for people who love UNIX; Linux is for
people who hate Windows
__
ay to save the state tables before firewall restart and
then reload them once the new rules are in place ?
Regards,
--
Wayne Pascoe
'tis far easier to get forgiveness than it is to
get permission - probably someone famous,
but more often, my Dad.
ems, and vice versa. They just don't talk
to machines beyond the firewall / on the internet.
--
Wayne Pascoe
I haven't lost my mind... It's backed
up on tape somewhere.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
y way to use an alias to do firewalling like this or do I
have to get another network card? The problem with another network card
is that will mean a whole new machine as I'm out of slots in this one.
Thanks in advance ?
--
Wayne Pascoe
Microsoft complaining about the source
license used by Lin
runs any more.
Can anyone advise me what I should do to get jikes to work right, with
the native JDK ?
--
Wayne Pascoe
WINDOWS: Where do you want to go today?
LINUX: Where do you want to go tomorrow?
FreeBSD: Are you guys coming or what?
___
[EMAIL PRO
same for the 192 IP and ether address.
Is there any way I can resolve this, or do I have to go back to multiple
switches ? Is this causing any problems ?
The reason I ask all of this is that people on the 192 network are
complaining about occasional lags.
Regards,
--
Wayne Pascoe
You cannot apply
E?
> I'm trying to connect this kind of Modem in my system FreeBSD 4.9, but
> the only drivers I've found were for pppoa2 and pppoa3, and my ADSL
> Provider uses the pppoe.
I'm not sure if the 330 is supported, but have you tried
http://speedtouch.sourceforge.net/ ?
Not sur
uld
appear in this file.
Regards,
--
Wayne Pascoe
Give me enough medals, and I'll win any war.
- Napolean
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ng on port 21
(netstat -an | grep LISTEN | grep 21)
3. Check the contents of /var/log/messages
Hope that helps...
--
Wayne Pascoe
A good sysadmin always carries around a few feet of
fiber. If he gets lost, he simply drops the fiber
on the ground, waits 10 minutes and asks the
bac
and also if there is a way (without
reverting to jails) of getting my applications to use an outgoing
connection ?
Regards,
--
Wayne Pascoe
Bury me deep when there's no will to be
better than you! - Metallica
___
[EMAIL PROTECTED] mailing list
h
closely as traffic grows.
That's probably the way forward, yes. Thanks.
--
Wayne Pascoe
There's optimism...
and then there's stupidity!
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questi
On Wed, Jan 07, 2004 at 01:36:25PM +, Francisco wrote:
> On Wed, 7 Jan 2004, Wayne Pascoe wrote:
>
> > Pentium III 667 Mhz with 512MB RAM
> > 2 x Intel EtherExpress 100Mb cards
>
> > Would either of these machines be able to meet my firewall requirements
machines be able to meet my firewall requirements
?
Regards,
--
Wayne Pascoe
If there's anything more important than my
ego around, I want it caught and shot now!
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/fr
other dependencies listed for this module, and
I'm not exactly sure what this LD error message means.
Cany anyone advise me on a fix for this ?
Thanks in advance,
--
Wayne Pascoe
Give me enough medals, and I'll win any war.
- Napolean
___
171 (LCD) as my secondary monitor.
Does anyone have any pointers as to how I could get this working
properly ?
Thanks in advance,
--
Wayne Pascoe
'tis far easier to get forgiveness than it is to
get permission - probably someone famous,
but more often, my Dad.
__
ork with a file outside of /etc
Regards,
--
Wayne Pascoe
A good sysadmin always carries around a few feet of
fiber. If he gets lost, he simply drops the fiber
on the ground, waits 10 minutes and asks the
backhoe operator for directions - Bill Bradford
Hi all,
Does anyone know if there is a problem with the mailing list archives at
http://www.freebsd.org/search/search.html#mailinglists ?
I was searching for something and got no results, so I simplified my
search to just
postfix
and still got no results.
Regards,
--
Wayne Pascoe
God gave
On Wed, Nov 05, 2003 at 07:06:42PM +1300, Jonathan Chen wrote:
> On Tue, Nov 04, 2003 at 08:25:57PM +0000, Wayne Pascoe wrote:
>
> [...]
> > however a make installworld is still failing with:
> >
> > Stop in /usr/src/include.
> > *** Error code 1
>
> It
uld
think to do was to disable securelevel in /etc/rc.conf :(
does anyone know what I may have missed or how I might rectify this
issue ?
Thanks,
--
Wayne Pascoe
'tis far easier to get forgiveness than it is to
get permission - probably someone famous,
but more often, my Dad.
_
eed an
explanation for when the 3rd party comes back and says that I am running
a vulnerable ssh.
Regards,
--
Wayne Pascoe
Everything to excess. To enjoy the flavour of
life, take big bites. Moderation is for
monks. - Robert Heinlein
___
[EMAIL PROTE
rsion that I should be expecting, or do I have a problem ?
--
Wayne Pascoe
It could be dangerous... A lot of killing...
and violence. You wanna come?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubs
cription of the failure is just "not work".
Allow me to expand on that then... I put the options in /etc/sysctl.conf
as follows:
kern.ipc.somaxconn=512
kern.ipc.shmmax=268435456
kern.ipc.shmall=65536
kern.ipc.shmmni=128
kern.ipc.semmns=256
When I reboot, sysctl -a | grep kern.ipc.semm
ld be aware of ?
Regards,
--
Wayne Pascoe
Be nice to your daemons.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
.
Regards,
--
Wayne Pascoe
Making numberplates
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
: ip_fw_ctl: invalid command
xl0 is my private network IP by the way
Regards,
--
Wayne Pascoe
I laugh in the face of danger... Then I
run and hide until it goes away!
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/fre
; /usr/ports/mail/postfix/work/postfix-2.0.14/README_FILES/SASL_README).
Thanks Damian and everyone else. I'm fairly sure with that much info
I'll be able to work it out :)
--
Wayne Pascoe
Mary had a crypto key, she kept it in
escrow, and everything that Mary said,
and how to go about setting up this
authentication ?
Regards,
--
Wayne Pascoe
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ions other
than where the port installed. This is risky though, because you might
delete something that is actually needed.
HTH,
--
Wayne Pascoe
'tis far easier to get forgiveness than it is to
get permission - probably someone famous,
but more often, my Dad.
__
On Tue, Sep 09, 2003 at 09:42:14PM +1000, John Birrell wrote:
> On Tue, Sep 09, 2003 at 12:34:47PM +0100, Wayne Pascoe wrote:
> > However, I am still not seeing anything in /var/log/messages when I
> > portscan the machine. The firewall appears to be working, as we receive
> >
"
firewall_type="CLIENT"
firewall_quiet="NO"
firewall_logging="YES"
The only place I can see firewall_logging being used is in /etc/rc.conf
and that is being used to set a sysctl variable :
echo 'Firewall logging=YES'
sysctl net.inet.ip.fw.verbose=1 &
on FreeBSD 4.9-PRERELEASE
The reason I am trying to install this is to run squirrelmail. Is there
possibly something better I could be using ?
Regards,
--
Wayne Pascoe
Be nice to your daemons.
___
[EMAIL PROTECTED] mailing list
http://lists.free
oth
/usr/ports/databases/mysql323-client and
/usr/ports/databases/mysql323-server
--
Wayne Pascoe
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
0 and
dvd+rw-format -blank=full and both returned the error:
* DVD±RW format utility by <[EMAIL PROTECTED]>, version 4.5.
* 4.7GB DVD-RW media in Sequential mode detected.
- [unable to umount]: Bad file descriptor
Has anyone successfully written or erased DVD-RW media on FreeBSD 5.1
using this to
configure: error: Your compiler cannot convert a longlong value to a
float! If you are using gcc 2.8.# you should upgrade to egcs 1.0.3 or
newer and try again
Anyone seen this ? Anyone have a workaround to allow building of MySQL
on FreeBSD 5 ?
Thanks in advance,
--
Wa
0 is found
The card does have dual output but I'm only trying to use the main VGA
connector. Am I even using the right device for the 9800pro ?
Any advice on this matter would be greatly aprreciated.
Regards,
--
Wayne Pascoe
You cannot apply a tec
On Wed, Jul 09, 2003 at 11:56:34AM -0600, Tillman wrote:
> On Wed, Jul 09, 2003 at 05:04:32PM +0100, Wayne Pascoe wrote:
> > On Wed, Jul 09, 2003 at 04:42:57PM +0100, scott wrote:
> > > when I installed OpenBSD, terminal type was 'Sun' !!!
> > >
> > &
On Wed, Jul 09, 2003 at 04:42:57PM +0100, scott wrote:
> when I installed OpenBSD, terminal type was 'Sun' !!!
>
> not 100% certain it's the same for FreeBSD, but possibly worth a try
You don't get to specify a terminal type, just choose from a list of 5
:(
-
ld start a standard install in ANSI mode by pressing 2 and then
enter, however I couldn't do anything in the Disk menu.
Any advice would be greatfully received.
Regards,
--
Wayne Pascoe
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/m
On Tue, Jul 08, 2003 at 02:04:47AM -0700, Kris Kennaway wrote:
> On Tue, Jul 08, 2003 at 09:45:27AM +0100, Wayne Pascoe wrote:
> > Hi all,
> >
> > If I send an e-mail in mutt and bcc some recipients, I seem to be able
> > to see the BCC headers in the received e-
issue ?
Regards,
--
Wayne Pascoe
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
partition 4 is:
Thanks in advance,
--
Wayne Pascoe
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
arch
term, including FreeBSD returns
The archive freebsd-questions contains the following items relevant to
`freebsd':
and no results.
Regards,
--
Wayne Pascoe
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
_algorithm deflate ;
}
I've tried aggressive, main and base as my exchange mode.
Anyone got any ideas about this ?
Thanks,
--
Wayne Pascoe
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, s
?
thanks,
--
Wayne Pascoe
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
any advice for a solution to this problem ?
Thanks in advance,
--
Wayne Pascoe
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
g to port 80 and /var/run/httpd.pid is never created.
Can anyone advise me on this ?
Thanks,
--
Wayne Pascoe
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
gt; located in the dir /usr/local/share/vim/vim61/colors. Also, you can set
> your colorscheme dynamically from within VIM using ``:color {name}''.
> I'm sure that a web search for something like ``vim colorscheme'' would
> produce much results.
Thanks. Elflord s
On Sun, Mar 09, 2003 at 05:37:22PM +0100, Dean Strik wrote:
> Wayne Pascoe wrote:
> > I use vim for my coding needs, and only have one problem with it. Unless
> > I'm using gvim, my comments are a dark blue. This is almost unreadable
> > in some light conditions.
> &g
and C ?
TIA,
--
Wayne Pascoe
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
On Thu, Mar 06, 2003 at 03:40:29AM -0800, Rus Foster wrote:
> On Thu, 6 Mar 2003, Wayne Pascoe wrote:
>
> > Hi all,
> >
> > Is there any way to tell what hardware is in a server without rebooting
> > it and checking dmesg?
> >
> > I'm just looking
Hi all,
Is there any way to tell what hardware is in a server without rebooting
it and checking dmesg?
I'm just looking for Processor type, memory, stuff like that. I know I
can get the number of processors with sysctl, but nothing else there :(
TIA,
--
Wayne Pascoe
To Unsubscribe:
got the disk back online and rebooted the box, we were able to
easily read data, and files that appeared to be corrupt turned out not
to be.
Can anyone advise me on why I saw what I saw and how I can get around
this in the future.
Regards,
--
Wayne Pascoe
To Unsubscribe: send mail to [EMAIL
ork, telnet to your
home IP address on that port. Eg to test port 80
telnet my.ip.address.here 80
HTH
--
Wayne Pascoe
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
pera working on FreeBSD 5 ?
TIA,
--
Wayne Pascoe
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
into ipfw?
Thanks,
--
Wayne Pascoe
msg19984/pgp0.pgp
Description: PGP signature
Hi all,
I'm using the linux-blackdown-jdk1.4.1 port and I'd like to know where
all the classes installed are. I can't see them in a pkg_info -L
The reason I need to know the classpath, is that I want to use jikes
as my compiler instead of javac.
TIA,
--
- Wayne Pascoe
Hi all,
Does anyone have an XFree86 Modeline for a GeForce 2 GTS driving an
Iiyama Visionmaster 410 to do 100Hz ?
Thanks in advance,
--
- Wayne Pascoe
Wageslaves - Who do you want to make rich
today?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe fr
terrible. When I
go edit -> preferences -> appearance -> Fonts, I have a very limited
set of fonts to choose from. In the Proportional box I can choose
between serife and sans serife. Under the other boxes, I can choose
between Bitstream Charter, Courier, Courier 10 pitch, Luxi Mono, Luxi
Se
ss I'm
very much mistaken?
When you start X do you get an NVIDIA flash screen ?
--
- Wayne Pascoe
'tis far easier to get forgiveness than it is to
get permission - probably someone famous,
but more often, my Dad.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with &qu
Hi all,
The NVIDIA FreeBSD driver docs state that the driver does not work
under -CURRENT. Does anyone know if there is a release in the pipeline
that will support this and if so when we can expect to see it ?
TIA,
--
- Wayne Pascoe
I have a very firm grasp on reality. I can
reach out
ell does yo mean? Yes or no ?
TIA,
--
- Wayne Pascoe
The thing is, I was POSITIVE that I wasn't
actually depressed, just that life had no
meaning and I was tired of living.
-- daystar on k5
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
the ipmon is running is in the same directory.
Otherwise, post a sample log line...
Regards,
--
- Wayne Pascoe
You know, it's simply not true that wars never
settle anything - James Burnham
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hi all,
Just a note for anyone wanting to try a Cisco Aironet PCI card under
FreeBSD. I had problems getting mine to work, but a firmware upgrade
to the latest Cisco firmware appears to have solved my problems.
Regards,
--
- Wayne Pascoe
You cannot apply a technological solution to
a
92.168.10.1: icmp_seq=6 ttl=64 time=16.505 ms
64 bytes from 192.168.10.1: icmp_seq=7 ttl=64 time=83.430 ms
I've moved these machines quite close together and abaout a room apart
yet it makes no difference.
Any advice on troubleshooting this would be _much_ appreciated.
Regards,
--
- Wayne
Hi all,
Does anyone know if the Cisco Aironet 350 series PCI card works under
FreeBSD-STABLE ?
>From what I can see in GENERIC and LINT, it looks like the 4500/4800
is supported as device an.
Anyone know for sure though?
TIA,
--
- Wayne Pascoe
Win if you can. Lose if you must.
I've also added an entry to my hosts file to make my mac
look at my IP for www.mac.com. The certificate also believes that it
is for www.mac.com
--
- Wayne Pascoe
Microsoft complaining about the source
license used by Linux is like the event
horizon calling the kettl
08 13:07:08 2003] [error] SSL Library Error: 336151528
error:140943E8:lib(20):func(148):reason(1000)
Any idea what could be causing this and how I could fix it ?
thanks in advance,
--
- Wayne Pascoe
Mary had a crypto key, she kept it in
escrow, and everything that Mary said,
t
an help a lot with setting up a repository like this, and can be
> found at: http://www.FreeBSD.org/doc/en_US.ISO8859-1/articles/cvs-freebsd/
I've looked through that, and it only really covers logging of
incoming stuff, not of checkouts or updates.
We need to log who and when is retrievi
Hi all,
Does anyone know if there is a way to have CVS log all activity to a
log file. Basically, I'd like a log of all checkouts, updates, imports
and commits. I've already got it logging imports commits, but I can't
work out how to log the other stuff.
TIA,
--
- Wayne Pasco
correct place
> in the file system. Can a source file marked with inappropriate rights
> cause this?
As per my previous request, please send me the error exactly as it
appears. I need some context to investigate this.
--
- Wayne Pascoe
WINDOWS: Where do you want to go today?
LINUX
http. Thanks for the pointer. > I wonder if they'll
> eventually block this other port > number also. I guess time will
> tell.
>
Do yourself a favour - Read your contract / AUP. If they have
something in there that says you can't run servers - Don't. You don'
ease post the exact error here and we'll see what we can do :)
--
- Wayne Pascoe
Wageslaves - Who do you want to make rich
today?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Leo De Geer <[EMAIL PROTECTED]> writes:
> divice bw0 at isa ?
>
> is in the config file
Have you got the following line in your kernel config file anywhere?
If not, try adding it and see if this solves the problem:
device isa
HTH
--
- Wayne Pascoe
There are no s
reboot.
We have 14 machines and we've been doing this since 4.2 with no
hassles.
--
- Wayne Pascoe
Everything to excess. To enjoy the flavour of
life, take big bites. Moderation is for
monks. - Robert Heinlein
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "
need gif support compiled in, the module will load.
Thanks a stack for that ! :)
--
- Wayne Pascoe
If you can't dazzle them with brilliance, riddle
them with bullets.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
espectively)
and the other for the internal network
(10.0.1.1 and 10.0.2.1 respectively)
What should my gifconfig and ifconfig lines be ?
--
- Wayne Pascoe
Microsoft complaining about the source
license used by Linux is like the event
horizon calling the kettle black - adamba on k5
Hi all,
I'm trying to setup up Tunneling VPN between two FreeBSD boxes.
I have network A talking through gateway A to Network B via gateway B
Network A IP Range - 192.168.11.0/24
Network B IP Range - 192.168.12.0/24
Gateway A Internal IP Address - 192.168.11.1
Gateway A External IP Address - 192
fails as follows:
> /usr/local/bin/cvsup -g -L 2 -P - /etc/cvsupfile
Stupid suggestion, but it has worked for me in the past. In /usr/src
do a make clean before you do the make world.
--
- Wayne Pascoe - http://www.penguinpowered.org.uk/wayne/
Give me enough medals, and I'll win
have no problems.
I had wireless working on FreeBSD when I had an ISA - PCMCIA
bridge. Since I moved to PCI, I've not been able to get it working.
I'm not sure what the status of the D-Link cards, but the Lucent
WaveLAN cards which many people OEM work quite well.
HTH.
--
- Wayne Pas
P + MySQL for years and figured I'd give
> server technology a try).
cd /usr/ports/databases/mysql323-server/
make install
Hope that helps.
--
- Wayne Pascoe - http://www.penguinpowered.org.uk/wayne/
Everything to excess. To enjoy the flavour of
life, take big bites. Modera
install the new kernel and reboot.
Regards,
--
- Wayne Pascoe - http://www.penguinpowered.org.uk/wayne/
Doing a linear scan over an associative array
is like trying to club someone to death with a
loaded Uzi. - Larry Wall
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "u
amateurs built the ark -- professionals built the Titanic."
> -
>
> Unknown
>
> "Just when you think you have life figured out and all is going well,
> watch your step, for you are about to fall." - Ancient Proverb
Please, I'm begging you - fix your sig.
1 - 100 of 108 matches
Mail list logo