Re: [Freedos-user] Installation Problem Hdd
On 20-04-23 08 h 03, Ludovico Giorio wrote: I checked, and the installer can only see my usb, not the hdd inside the laptop. Message is: "SETUP wasn't able to locate any disks to install FreeDOS 1.1 from." What am I doing wrong? I enabled legacy support in Bios. I formatted my hdd in Fat. You are a bit unclear about "legacy support" in BIOS. Well, I am probably not the most qualified to answer but... as I see no one else answering... If you have the choice between AHCI and IDE you should (as far as I remember) use IDE. AHCI being better in general, but not supported by FreeDOS (at least this old version). Else I would probably try to boot with a Linux image to make sure the disk is visible (well connected). ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem Hdd
Hi! There is no need to use Linux to replace the MBR boot code, you can easily do that with DOS tools. Of course if you prefer Linux tools, they can be used for the same purpose :-) I assume you want to get rid of Windows, so you do not need to convert from GPT to MBR. Deleting the partitions and restarting with MBR will be sufficient. You could also wipe the drive if you want to leave no data behind when you return the computer. There are both DOS and Linux tools for that and modern disk even have built-in features to wipe themselves. For example hdparm in Linux can be used to start that process, which can take very long. Regards, Eric > If GPT is the issue, should a Linux based tool be used to get around > that? I'm thinking something like boot nuke or something similar. ... >> You can tell FDISK to install a fresh MBR boot >> code, see the command line help of FDISK :-) ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem Hdd
If GPT is the issue, should a Linux based tool be used to get around that? I'm thinking something like boot nuke or something similar. April 23, 2020 8:16 AM, "Eric Auer" wrote: > Hi! Which tools in which versions did you use? > > For example which FORMAT, FDISK...? Let me start by > saying the choice for MBR was good: GPT partitions > are not visible for DOS. Not sure what the purpose > of that EFI partition is, but it is easily possible > that Windows had a boot loader on the first disk > to boot from the second, affecting both boots. > > You can tell FDISK to install a fresh MBR boot > code, see the command line help of FDISK :-) > Of course you also want to mark the partition as > bootable and for big disks, you probably want to > use FAT32 LBA partitions for FreeDOS. > > Regards, Eric > > ___ > Freedos-user mailing list > Freedos-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freedos-user ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem Hdd
Hi! Which tools in which versions did you use? For example which FORMAT, FDISK...? Let me start by saying the choice for MBR was good: GPT partitions are not visible for DOS. Not sure what the purpose of that EFI partition is, but it is easily possible that Windows had a boot loader on the first disk to boot from the second, affecting both boots. You can tell FDISK to install a fresh MBR boot code, see the command line help of FDISK :-) Of course you also want to mark the partition as bootable and for big disks, you probably want to use FAT32 LBA partitions for FreeDOS. Regards, Eric ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem Hdd
What kind of hard drive did you take out? Was it a serial ATA hard drive or an IDE hard drive? Have you considered trying Freedos 1.3 RC2? Make sure you aren't in AHCI mode? April 23, 2020 7:03 AM, "Ludovico Giorio" mailto:ludovico8...@hotmail.it?to=%22Ludovico%20Giorio%22%20)> wrote: Hello everyone, I'm having a problem installing Freedos 1.1/1.2 on my laptop. The laptop came shipped with a custom Freedos version from Hp, I installed Win10 on a second drive, had some problems and need to return the laptop. I took out the second drive, and the win bootloader was still there. I accessed the Efi partition and erased the windows bootloader, but doing this I must have made some mistake, and now the laptop wont boot in Hp dos too. So, I downloaded Freedos 1.1/1.2, created a bootable usb with it, restarted on usb and accessed the installation prompt. Problem is, installation is stuck in a partitioning loop: after partitioning, the installer starts again anew. I checked, and the installer can only see my usb, not the hdd inside the laptop. Message is:"SETUP wasn't able to locate any disks to install FreeDOS 1.1 from." What am I doing wrong? I enabled legacy support in Bios. I formatted my hdd in Fat. I think that the installer can't see the hd, and don't know why. Is it because of the hdd format (I made it MBR)? Are there some hdd requirement I m not aware of? If someone can help me about this, it would be greatly appreciated. Thank you and good luck for the emergency. ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem -> PANIC: MCB chain corrupted System halted
Hi Arkady, Sorry, she downloaded the SR9 beta2 ISO and got MCB Chain corrupt, I told her to try Odin 0.6, well it solve the problem. The Kernel should be 2035a-unstable. Rgds, Johnson. ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem -> PANIC: MCB chain corrupted System halted
On Thu, 15 Jun 2006 05:48:54 +0400, you wrote: Hi, > Not enough information: which config.sys and autoexec.bat content on >those disk? After which statement in config.sys you get this message (what >you see on screen before this message)? Which kernel and FreeCOM version you >use (do you get latest versions?)? Cherry Chien replace memory manager and the problem gone. Rgds, Johnson. ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem -> PANIC: MCB chain corrupted System halted
Candidate for kernel bug of the month perhaps? some underlying malloc() call that way prog handles memory block integrity of the structures and become damaged. Step through config.sys/autoexec.bat to see the bad wolf and remove it.. --chris Arkady V.Belousov wrote: >Hi! > >5-Июн-2006 11:48 [EMAIL PROTECTED] (cherry chien) wrote to >: > >cc> After reboot from 2G-harddisk >cc> Invalid Opcode at 2A18 0EB4 0613 03F2 . >cc> dos mem corrupt, first_mcb= >cc> prev :|1C 12 CF 00 DF 11 CF 00 C3 E2 00 F0 DF 11 Cf 00 >cc> notMZ:|1C 12 CF 00 DF 11 CF 00 C3 E2 00 F0 DF 11 Cf 00 >cc> PANIC: MCB chain corrupted >cc> System halted >cc> How can I fix the boot problem? > > Not enough information: which config.sys and autoexec.bat content on >those disk? After which statement in config.sys you get this message (what >you see on screen before this message)? Which kernel and FreeCOM version you > > ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem -> PANIC: MCB chain corrupted System halted
Hi! 5-Июн-2006 11:48 [EMAIL PROTECTED] (cherry chien) wrote to : cc> After reboot from 2G-harddisk cc> Invalid Opcode at 2A18 0EB4 0613 03F2 . cc> dos mem corrupt, first_mcb= cc> prev :|1C 12 CF 00 DF 11 CF 00 C3 E2 00 F0 DF 11 Cf 00 cc> notMZ:|1C 12 CF 00 DF 11 CF 00 C3 E2 00 F0 DF 11 Cf 00 cc> PANIC: MCB chain corrupted cc> System halted cc> How can I fix the boot problem? Not enough information: which config.sys and autoexec.bat content on those disk? After which statement in config.sys you get this message (what you see on screen before this message)? Which kernel and FreeCOM version you use (do you get latest versions?)? ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem
At 02:07 PM 3/25/2006 -0600, I wrote: As an alternate choice, you might try locating the actual problem, which likely is not within EMM386 itself, rather than telling people to use obsolete versions of software which won't fix the underlying problem and which fail to provide a full range of machine capability and compatibility. Also, I'm not talking about the UMBPCI software within the context of providing full capability and compatibility, so no flaming e-mail exchanges from anyone this time, please. UMBPCI is fine with me, ok? --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem
At 10:55 PM 3/21/2006 +, FreeDOS Ankreuzen wrote: Yes on some mainbords PC s with PENTIUM II, there is a problem to install FDOS BETA 9SR2 from CD. If it s possibel use a Bootdisk with old FreeDOS Version and pre-install FreeDOS manually. Please tell me if you are using a Pentium II or which Mainboard it is. I ve this problem with a pentium II NMC mainbord you should boot the floppy without EMM386! use fdxms.sys or fdxxms.sys and umbpci. I ll create a bootdisk. As an alternate choice, you might try locating the actual problem, which likely is not within EMM386 itself, rather than telling people to use obsolete versions of software which won't fix the underlying problem and which fail to provide a full range of machine capability and compatibility. Creating additional bootdisks of old version software rather than addressing fundamental problems do not help the situation ,and make the multiple FreeDOS version selection even more confusing. --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem
I am not using a PII. I am using an Abit KD7E with an AMD Athlon xp 1800 and sr2 won't install. sr1 and several previous releases work. Jeff On Tuesday 21 March 2006 22:55, FreeDOS Ankreuzen wrote: > Yes on some mainbords PC s with PENTIUM II, there is a problem > to install FDOS BETA 9SR2 from CD. > > If it s possibel use a Bootdisk with old FreeDOS Version > and pre-install FreeDOS manually. > > Please tell me if you are using a Pentium II or which Mainboard > it is. I ve this problem with a pentium II NMC mainbord > you should boot the floppy without EMM386! > use fdxms.sys or fdxxms.sys and umbpci. I ll create a bootdisk. > OR use the fdosbeta9SR1 ! > > R.E.Dick http://ankreuzen.de german freedos infos > > -- Arachne mail - FreeDOS - deutsch - http://ankreuzen.de -- > > > --- > This SF.Net email is sponsored by xPML, a groundbreaking scripting > language that extends applications into web and mobile media. Attend > the live webcast and join the prime developer group breaking into > this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121 >642 ___ > Freedos-user mailing list > Freedos-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freedos-user -- "Good afternoon, madam. How may I help you?" "Good afternoon. I'd like a FrintArms HandCannon, please." "A--? Oh, now, that's an awfully big gun for such a lovely lady. I mean, not everybody thinks ladies should carry guns at all, though I say they have a right to. But I think... I might... Let's have a look down here. I might have just the thing for you. Yes, here we are! Look at that, isn't it neat? Now that is a FrintArms product as well, but it's what's called a laser -- a light-pistol some people call them. Very small, as you see; fits easily into a pocket or bag; won't spoil the line of a jacket; and you won't feel you're lugging half a tonne of iron around with you. We do a range of matching accessories, including -- if I may say so -- a rather saucy garter holster. Wish I got to do the fitting for that! Ha -- just my little joke. And there's *even*... here we are -- this special presentation pack: gun, charged battery, charging unit, beautiful glider-hide shoulder holster with adjustable fitting and contrast stitching, and a discount on your next battery. Full instructions, of course, and a voucher for free lessons at your local gun club or range. Or there's the *special* presentation pack; it has all the other one's got but with *two* charged batteries and a night-sight, too. Here, feel that -- don't worry, it's a dummy battery -- isn't it neat? Feel how light it is? Smooth, see? No bits to stick out and catch on your clothes, *and* beautifully balanced. And of course the beauty of a laser is, there's no recoil. Because it's shooting light, you see? Beautiful gun, beautiful gun; my wife has one. Really. That's not a line, she really has. Now, I can do you that one -- with a battery and a free charge -- for ninety-five; or the presentation pack on a special offer for one-nineteen; or this, the special presentation pack, for one-forty-nine." "I'll take the special." "Sound choice, madam, *sound* choice. Now, do--?" "And a HandCannon, with the eighty-mill silencer, five GP clips, three six-five AP/wire-fl'echettes clips, two bipropellant HE clips, and a Special Projectile Pack if you have one -- the one with the embedding rounds, not the signalers. I assume the night-sight on this toy is compatible?" "Aah... yes, And how does madam wish to pay?" She slapped her credit card on the counter. "Eventually." -- Iain M. Banks, "Against a Dark Background" --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem
Yes on some mainbords PC s with PENTIUM II, there is a problem to install FDOS BETA 9SR2 from CD. If it s possibel use a Bootdisk with old FreeDOS Version and pre-install FreeDOS manually. Please tell me if you are using a Pentium II or which Mainboard it is. I ve this problem with a pentium II NMC mainbord you should boot the floppy without EMM386! use fdxms.sys or fdxxms.sys and umbpci. I ll create a bootdisk. OR use the fdosbeta9SR1 ! R.E.Dick http://ankreuzen.de german freedos infos -- Arachne mail - FreeDOS - deutsch - http://ankreuzen.de -- --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem
[EMAIL PROTECTED] wrote: I finally figured out what you mean by sr#1 I looked all over the Free DOS website for a download of Service Release # 1 Can't find a download for this Release Do you see a download posted anywhere for Service Release # 1 ??? Thank you in advance for looking http://freedos.sourceforge.net/freedos/files/ Have you checked one of the mirror sites? http://cvs.sourceforge.net/viewcvs.py/freedos/ check this site too. -- TomLeeM / BigWarpGuy * * * * * * * * * * * * * * * * * * * * * * * Director of Communications - * - Linkmaster * * * * * * * * * OS/2 Warp - eComStation Org * * OS/2 World * * * * * * * * * http://www.os2ecs.org * * http://www.os2world.com * * * * Supporting Past OS/2 Users and Future eCS Users * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * http://home.comcast.net/~tomleem * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem
ftp://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/distributions/old/beta9sr1/ On Thursday 23 March 2006 05:03, [EMAIL PROTECTED] wrote: > I finally figured out what you mean by sr#1 > > I looked all over the Free DOS website for a download of Service > Release # 1 > > Can't find a download for this Release > > Do you see a download posted anywhere for Service Release # 1 ??? > > Thank you in advance for looking -- You single-handedly fought your way into this hopeless mess. --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation Problem
I finally figured out what you mean by sr#1 I looked all over the Free DOS website for a download of Service Release # 1 Can't find a download for this Release Do you see a download posted anywhere for Service Release # 1 ??? Thank you in advance for looking
Re: [Freedos-user] Installation Problem
I saw your suggestion posted before and I have already tried doing that No luck What is sr#1 ??
Re: [Freedos-user] Installation Problem
Same thing exactly going on here. Many others experiencing the same results. Something is wrong with sr #2. Try this, I haven't yet: Hi, it could be the case that the nlsfunc interaction is what crashes for you (nlsfunc/display/mode/devel-kernel). Try if it helps to skip loading nlsfunc (hit f8 at boot, then you are asked for each driver if it should be loaded). If that helps: Just remove nlsfunc from your config sys. Then chcp will no longer work, but you can still use display and mode to switch codepages manually. If it doesn't work, try to download sr#1. It works fine. Good Luck, JeffM. On Thursday 23 March 2006 03:14, [EMAIL PROTECTED] wrote: > I downloaded the most recent release of Free DOS beta9 Service > Release #2 (Dated 11/30/2005) twice and burned both ISO images to > CD's via Nero as recommended > > Tried several times to install DOS via the CD's > > On each and every attempt the installation failed > > Display screen showed the following results > > DOS version 7.10 > FreeDos kernal version 0.0.35 > CON codepage support (Free DOS DISPLAY) not loaded. > FreeDOS DISPLAY ver. 0.12 > Buffers allocated: 002 in TPA, 000 in XMS > Uncompressing and loading UPXed CPI (CPX) file :-). > > Invalid Opcode at ... > > Invalid Opcode at ... > > Invalid Opcode at ... > > Invalid Opcode at ... > > Invalid Opcode at .. > > Program installation freezes up - nothing further happens !!! > > Does anyone have any suggestions on what can be done to solve this > problem > > Any comments would be greatly appreciated -- Let him choose out of my files, his projects to accomplish. -- Shakespeare, "Coriolanus" --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation problem...
I ve got the same errors with freedos beta 9SR2 invalid opcodes messages and the installation stopped First I have build a new freedos bootdisk, from my collected files. I have bought a 400 Mhz PC. Installation of FreeDOS with Emm386 2.08 , Kernel 2035b-csv works without any problems. It s an AMD K6 . Than i ve tested it with my Pentium II 432Mhz 2GB SCSI 256 MB RAM System. the way i have found with Pentium II and special chipsets! is to use fdxxms and not himem and emm386 but umbpci . The installation with emm386 in Version 2.02 works fine, it s not the new kernel but emm386 and arachne makes problems to show png and jpg images the system crashes.. I don t know how to use himem and emm386 on this PC! With fdxxms and umbpci there is no problem . Everything works fine. UMBPCI tells an INTEL 440LX/EX chipset and seems to be required. There are other Chipsets UMBPCI provides. I don t know if emm386 provides this in any way. I think it s EMM version 2.04 on the freedos beta9 SR2, but i don t know how it makes the harddisk bootable after format . The freedos beta9 sr2 installer could not install freedos on this pc! A bootdisk or odin with a new himem and emm is not able to install freedos for this pc. After sys c: the system freeze, kernel is not written. Without himem and emm it works for the same system. With new emm386 in config.sys of the pc, opcode errors occurs and system stops. R.E.Dick , http://ankreuzen.de --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation problem...
Here is a suggestion that you could try to fix the installation problem. I haven't had a chance to try it myself: Hi, it could be the case that the nlsfunc interaction is what crashes for you (nlsfunc/display/mode/devel-kernel). Try if it helps to skip loading nlsfunc (hit f8 at boot, then you are asked for each driver if it should be loaded). If that helps: Just remove nlsfunc from your config sys. Then chcp will no longer work, but you can still use display and mode to switch codepages manually. Looking forward to reading your test results... Eric ps: if English is your native language, you are probably not interested in codepage switching at all anyway. On Sunday 19 March 2006 17:55, JeffM. wrote: > This may be true on your pc, however, I have successfully > installed the last several versions on my pc (since pre release 4 > I think) and not a single thing has gone wrong until this one. > I haven't changed a thing so something definitely went wrong with > sr2. I can still put in the previous releases without troubles. > > It is okay, as sr1 works fine for what I'm doing. However, I would > like to let the FreeDOS community know what's happening. Also, > if there is a simple fix I can do on my end I'd like to try it. > Best of luck, > JeffM. > > On Saturday 18 March 2006 03:28, Panigaz wrote: > > In one PC that I tried to install gave the same mistake.. I put in > > another gave right.. I believe to be some thing in the bios of the > > pc.. > > > > > > > > > > I had the same exact problem. There is clearly something wrong > > with service release 2. I had to go back and install sr1. I have > > installed the last several releases of FD and they all went in > > flawlessly on this hardware. > > > > There have been some suggestions made, but I haven't tried > > them yet. Look through earlier postings if you can, subject: > > "problems with floppy install". Best of luck to you. > > > > J.M. > > > > On Thursday 16 March 2006 11:23, Escorter wrote: > > > Hi! > > > > > > I downloaded the latest fdfullcd.iso, and I burned it at 16x > > > speed. I booted my PII from this cd. The booting is going > > > fine, but when I start the installation, I get four line of > > > "Invalid Opcode at..." error message, and the system halted. > > > What does it mean? And how can I fix it? -- "... all the modern inconveniences ..." -- Mark Twain --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation problem...
This may be true on your pc, however, I have successfully installed the last several versions on my pc (since pre release 4 I think) and not a single thing has gone wrong until this one. I haven't changed a thing so something definitely went wrong with sr2. I can still put in the previous releases without troubles. It is okay, as sr1 works fine for what I'm doing. However, I would like to let the FreeDOS community know what's happening. Also, if there is a simple fix I can do on my end I'd like to try it. Best of luck, JeffM. On Saturday 18 March 2006 03:28, Panigaz wrote: > In one PC that I tried to install gave the same mistake.. I put in > another gave right.. I believe to be some thing in the bios of the > pc.. > > > I had the same exact problem. There is clearly something wrong > with service release 2. I had to go back and install sr1. I have > installed the last several releases of FD and they all went in > flawlessly on this hardware. > > There have been some suggestions made, but I haven't tried > them yet. Look through earlier postings if you can, subject: > "problems with floppy install". Best of luck to you. > > J.M. > > On Thursday 16 March 2006 11:23, Escorter wrote: > > Hi! > > > > I downloaded the latest fdfullcd.iso, and I burned it at 16x > > speed. I booted my PII from this cd. The booting is going > > fine, but when I start the installation, I get four line of > > "Invalid Opcode at..." error message, and the system halted. > > What does it mean? And how can I fix it? -- Afternoon very favorable for romance. Try a single person for a change. --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation problem...
In one PC that I tried to install gave the same mistake.. I put in another gave right.. I believe to be some thing in the bios of the pc.. ..em uma maquina que tentei instalar deu o mesmo erro.. coloquei em outra deu certo.. acredito ser alguma coisa na bios do pc.. Panigaz Brazil /RS - Original Message - From: "JeffM." <[EMAIL PROTECTED]> To: Sent: Thursday, March 16, 2006 10:44 AM Subject: Re: [Freedos-user] Installation problem... I had the same exact problem. There is clearly something wrong with service release 2. I had to go back and install sr1. I have installed the last several releases of FD and they all went in flawlessly on this hardware. There have been some suggestions made, but I haven't tried them yet. Look through earlier postings if you can, subject: "problems with floppy install". Best of luck to you. J.M. On Thursday 16 March 2006 11:23, Escorter wrote: > Hi! > > I downloaded the latest fdfullcd.iso, and I burned it at 16x > speed. I booted my PII from this cd. The booting is going > fine, but when I start the installation, I get four line of > "Invalid Opcode at..." error message, and the system halted. > What does it mean? And how can I fix it? > > > > > _ > Állest Keres? Mi segítünk! Több ezer állásajánlat közül > válogathat: http://www.jobpilot.hu > > > > > --- > This SF.Net email is sponsored by xPML, a groundbreaking scripting > language that extends applications into web and mobile media. Attend > the live webcast and join the prime developer group breaking into > this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642 > ___ > Freedos-user mailing list > Freedos-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freedos-user -- You like to form new friendships and make new acquaintances. --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=k&kid0944&bid$1720&dat1642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user __ Informaçăo do NOD32 1.1436 (20060309) __ Esta mensagem foi verificada pelo NOD32 Sistema Antivírus http://www.nod32.com.br --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation problem...
I had the same exact problem. There is clearly something wrong with service release 2. I had to go back and install sr1. I have installed the last several releases of FD and they all went in flawlessly on this hardware. There have been some suggestions made, but I haven't tried them yet. Look through earlier postings if you can, subject: "problems with floppy install". Best of luck to you. J.M. On Thursday 16 March 2006 11:23, Escorter wrote: > Hi! > > I downloaded the latest fdfullcd.iso, and I burned it at 16x > speed. I booted my PII from this cd. The booting is going > fine, but when I start the installation, I get four line of > "Invalid Opcode at..." error message, and the system halted. > What does it mean? And how can I fix it? > > > > > _ > Állest Keres? Mi segítünk! Több ezer állásajánlat közül > válogathat: http://www.jobpilot.hu > > > > > --- > This SF.Net email is sponsored by xPML, a groundbreaking scripting > language that extends applications into web and mobile media. Attend > the live webcast and join the prime developer group breaking into > this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642 > ___ > Freedos-user mailing list > Freedos-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freedos-user -- You like to form new friendships and make new acquaintances. --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642 ___ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
Re: [Freedos-user] Installation problem
Jens Ungerer schreef: 0Stage 3: Create Startup automation file ... Invalid Opcode at 9D79 F000 0006 0300 0086 4F43 464E 4749 dos mem corrupt, first_mcb=0271 prev 0271:|4D 0800 E7 01 00 00 00 53 44 00 00 00 00 00 00 M...rSD.. notMZ 0459:|06 00 03 86 00 00 00 00 00 00 00 00 00 00 00a° PANIC:MCD chain corrupted System halted I think it's the CTTY NUL command in below batchcode, I remember earlier problems. It causes screen output to be not seen. Your installed FreeDOS is still bootable? if not, just copy c:\fdos\kernel32.sys to c:\kernel.sys No further solution, I'm afraid. A program corrupts the memory until a reboot. Bernd here's the corresponding batchcode for the installation (BASE set, disk01, package samcfg.zip, file postinst.bat): :infomenu for %%x in ( %fdosdir% %fdosroot%\nls a:\freedos ) do if exist %%x\localize.%lang% set nlspath=%%x ctty con cls for %%x in ( 0 1 2 ) do localize 3.%%x for %%x in ( 1 2 3 4 5 6 ) do if "%step%%x%"=="û" localize 4.%%x for %%x in ( 1 2 3 4 5 6 ) do if "%step%%x%"=="é" localize 5.%%x ctty nul %fdosroot%\bin\sleep 1 for %%x in ( 1 2 3 4 5 6 7) do if "%step%%x%"=="é" goto step%%x goto end --- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl ___ Freedos-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freedos-user