On Fri, Jun 30, 2006 at 07:08:55PM -0400, Willie Wong wrote:
On Fri, Jun 30, 2006 at 10:32:59AM -0700, Penguin Lover Richard Fish squawked:
FYI, I'm using nvidia-kernel-1.0.8762 with xorg 7.0, and they work fine.
Thanks, and good to hear. I've been waiting for some souls braver than
I to
Hi to Everyone!
I have followed the HOWTO_XGL to install XGL on my system, but when I arrive
at the point: emerge -av mesa I get:
-
These are the packages that would be merged, in order:
Calculating dependencies \
!!! All ebuilds that could satisfy =x11-libs/libdrm-2.1_alpha have been
I've overcome a few hiccups along the way, but this one has me stumped.
Out of sheer curiousity, why is -ffast-math being invoked? I do *NOT*
have it in my CFLAGS. ld's problem seems to be cannot find -lGL. Does
that help?
Emerging (1 of 10) x11-apps/mesa-progs-6.4.2 to /
checking ebuild
On Saturday 01 July 2006 03:20, Kristian Poul Herkild wrote:
I still wonder how I managed to forget the dash in UTF-8 considering how
familiar I am with that particular locale.
I think it didn't matter with the old system that was
using /etc/locales.build.
I must have been mentally
Boyd Stephen Smith Jr. wrote:
On Wednesday 24 May 2006 02:16, Jonathan Chocron [EMAIL PROTECTED]
- If I first emerge a package, for example kmail, with emerge kmail, and
later, during an upgrade phase, do an emerge --oneshot kmail, will kmail
be removed from world ?
That's one for the
On 01/07/06, Michael [Plouj] Ploujnikov [EMAIL PROTECTED] wrote:
This is really my whole cupsd.conf file:
# grep -v \# /etc/cups/cupsd.conf |cat -s
OK lets think through this once more. Your original $ lpstat -h
localhost -t output although it shows your gray-deskjet as the
default
On 01/07/06, Anielkis Herrera Gonzalez [EMAIL PROTECTED] wrote:
ok(but I don't know why), but you can see the other init scripts.. no?
Thanks, I found the other thread and will continue there.
--
Regards,
Mick
--
gentoo-user@gentoo.org mailing list
On 29/06/06, Neil Bothwick [EMAIL PROTECTED] wrote:
On Thu, 29 Jun 2006 13:08:13 -0300, Daniel da Veiga wrote:
Adding 'RC_PLUG_SERVICES=!net.eth0' to /etc/conf.d/rc may fix this.
Read the comments in the file for an explanation.
Thanks for the info Neil, I also had this problem before, as
Bo Ørsted Andresen wrote:
On Saturday 01 July 2006 03:20, Kristian Poul Herkild wrote:
I still wonder how I managed to forget the dash in UTF-8
considering how familiar I am with that particular locale.
I think it didn't matter with the old system that was
using /etc/locales.build.
Where
Hi All,
I have been trying to get some peripherals of my Compaq Evo N600c
working and to this day have been met with a rather discouraging
failure. So I thought of giving it another go, this time perhaps
understanding a bit more.
This laptop has two USB ports. However, lshw and lspci shows
OK lets think through this once more. Your original $ lpstat -h
localhost -t output although it shows your gray-deskjet as the
default destination, it does not show that the other printer is
paused.
Try again to manually set the default printer (for all users) and see
if it picks it up:
#
Bah! Now I found it. The server was set wrong in /etc/cups/client.conf !
So, I have everything fixed now.
Thanks.
--
gentoo-user@gentoo.org mailing list
Hi all,
Trying to emerge -uD world, with xorg-x11-7.0-r1; a lot has been
done yet but I cannot emerge freeglut:
...
boldair X11 # emerge -uDav world
These are the packages that would be merged, in order:
Calculating world dependencies... done!
I believe that missing keyword stuff can be unmasked if you put x11-libs/libdrm - in your package.keywords. This is just a guess, but I think it should work. This isn't a fix, you should probably file a bugzilla report on it, as nothing in the package database should be without a keyword.
-- Jason
Well, the back/forward buttons on my logitech mx700 don't work, but that's a relatively minor thing. Those mouse buttons will work fine with a little configuration:
http://www.gentoo-wiki.com/HOWTO_Advanced_Mouse-- Jason Weisberger[EMAIL PROTECTED]
On Saturday 01 July 2006 09:34, Mauro Arnoldi wrote:
Hi to Everyone!
I have followed the HOWTO_XGL to install XGL on my system, but when I
arrive at the point: emerge -av mesa I get:
-
These are the packages that would be merged, in order:
Calculating dependencies \
!!! All ebuilds
On Saturday 01 July 2006 17:32, Jason Weisberger wrote:
I believe that missing keyword stuff can be unmasked if you put
x11-libs/libdrm - in your package.keywords. This is just a guess, but I
think it should work. This isn't a fix, you should probably file a
bugzilla report on it, as nothing
Let's just say that Googling for a solution is hard when you don't
have X. I could've unhooked my monitor from my main machine and
switched to my backup machine, but it's a hassle. Anyhow, I did manage
to find the solution in Google using w3m instead of Firefox. The Q and
A is...
Hello,
I am looking for a programm that I can practice 10 finger typing for
gentoo/linux. Does anyone have a recommendation, or is there even one in
portage? Does it make sense what I would like to say?
thanks,
Karsten
--
gentoo-user@gentoo.org mailing list
On Saturday 01 July 2006 18:53, krgn wrote:
I am looking for a programm that I can practice 10 finger typing for
gentoo/linux. Does anyone have a recommendation, or is there even one in
portage? Does it make sense what I would like to say?
kde-base/ktouch
--
Bo Andresen
pgpzaSSNyc2cV.pgp
Bo,Gotcha, I didn't realize it was an overlay. Thanks for the input.On 7/1/06, Bo Ørsted Andresen [EMAIL PROTECTED]
wrote:On Saturday 01 July 2006 17:32, Jason Weisberger wrote: I believe that missing keyword stuff can be unmasked if you put
x11-libs/libdrm - in your package.keywords. This is
echo 'x11-libs/libdrm -* ~*' /etc/portage/package.keywords
What does the -* and -~ do??
I've only ever put something like this in my package.keywords:
x11-libs/libdrm ~x86
--
gentoo-user@gentoo.org mailing list
On Saturday 01 July 2006 19:59, Daevid Vincent wrote:
What does the -* and -~ do??
It tells portage you want to accept a missing keyword for that package. The
alternative is to not use alpha software from the portage-xgl overlay...
--
Bo Andresen
pgplgdZoh1UOn.pgp
Description: PGP signature
So X runs, but no xterms, with an error message about not being able
to find libXaw.so.8. First, I checked to see what was available...
m3000[root][~] ll /usr/lib/libXaw.so.*
lrwxrwxrwx 1 root root 12 Jul 1 02:33 /usr/lib/libXaw.so.6 - libXaw6.so.6
lrwxrwxrwx 1 root root 12 Jul 1 02:33
On 7/1/06, Walter Dnes [EMAIL PROTECTED] wrote:
* Updating module dependencies for 2.6.16-gentoo-r7 ...
WARNING: //lib/modules/2.6.16-gentoo-r7/video/fglrx.ko needs unknown symbol
inter_module_unregister
WARNING: //lib/modules/2.6.16-gentoo-r7/video/fglrx.ko needs unknown symbol
I had to do this to make xterm work again:
emerge -av --unmerge sys-apps/utempter
emerge -av xterm x11-libs/libXaw
--
gentoo-user@gentoo.org mailing list
On Sat, 1 Jul 2006, krgn wrote:
Hello,
I am looking for a programm that I can practice 10 finger typing for
gentoo/linux. Does anyone have a recommendation, or is there even one in
portage? Does it make sense what I would like to say?
I know only one - gtypist. It's a console program. I've
Will this mask work for nvidia cards too?
--
Best regards,
Daniel
--
gentoo-user@gentoo.org mailing list
On Saturday 01 July 2006 21:00, Daniel Iliev wrote:
Will this mask work for nvidia cards too?
You really need to learn how to explain a question clearly... The libdrm
package in an overlay had no keywords. OP wanted to use it. That has nothing
to do with any particular graphics card... If you
Walter Dnes wrote:
So X runs, but no xterms, with an error message about not being able
to find libXaw.so.8. First, I checked to see what was available...
m3000[root][~] ll /usr/lib/libXaw.so.*
lrwxrwxrwx 1 root root 12 Jul 1 02:33 /usr/lib/libXaw.so.6 - libXaw6.so.6
lrwxrwxrwx 1 root
Tero Grundström wrote:
On Sat, 1 Jul 2006, krgn wrote:
Hello,
I am looking for a programm that I can practice 10 finger typing for
gentoo/linux. Does anyone have a recommendation, or is there even one
in portage? Does it make sense what I would like to say?
I know only one - gtypist. It's
On Saturday 24 June 2006 12:45 pm, Richard Fish wrote:
On 6/23/06, David Corbin [EMAIL PROTECTED] wrote:
Any suggestions as to how to fix this problem?
My first guess is MAKEOPTS=-j1 emerge --oneshot kdebase. If that
doesn't help, please post the output of emerge --info.
Well, now the
I have a MSI K8MM-V motherboard and an * AMD Mobile Athlon 64 3000+
(DTR) cpu and the keyboard works fine in bios or once booted to the
command line but nothing while in the grub menu.
*
--
gentoo-user@gentoo.org mailing list
On 01/07/06, Michael [Plouj] Ploujnikov [EMAIL PROTECTED] wrote:
Bah! Now I found it. The server was set wrong in /etc/cups/client.conf !
So, I have everything fixed now.
Thanks.
Phew! At long last . . . I was running out of ideas. :-)
Glad you got it fixed now.
--
Regards,
Mick
--
great! that's what I was looking for, ktouch is probably cool but
needs kdelibs, which take too long too compile :)
no prob. Just ask a friend who has KDE installed to send you a tarball
of his installation.
:)))
Best regards
ce
--
gentoo-user@gentoo.org mailing list
On Fri, 30 Jun 2006 19:08:57 -0700, Daevid Vincent wrote:
Related to this, are we all still waiting on newer nvidia drivers for
the Xorg 7.1 upgrades? I recall that was a problem and reading that the
two are not compatible yet...
It seems like this won't be fixed before the 9xxx drivers are
On Sat, 01 Jul 2006 10:25:23 +0200, Remy Blank wrote:
- If I first emerge a package, for example kmail, with emerge kmail,
and later, during an upgrade phase, do an emerge --oneshot kmail,
will kmail be removed from world ?
That's one for the portage devs, but I don't /think/ so.
Christoph Eckert wrote:
great! that's what I was looking for, ktouch is probably cool but
needs kdelibs, which take too long too compile :)
no prob. Just ask a friend who has KDE installed to send you a tarball
of his installation.
:)))
Best regards
ce
I have KDE
On Sat, Юли 1, 2006 10:10 pm, Bo Г#65533;rsted Andresen wrote:
On Saturday 01 July 2006 21:00, Daniel Iliev wrote:
Will this mask work for nvidia cards too?
You really need to learn how to explain a question clearly... The libdrm
package in an overlay had no keywords. OP wanted to use it.
On 1 Jul 2006, at 23:50, Dale wrote:
Christoph Eckert wrote:
great! that's what I was looking for, ktouch is probably cool but
needs kdelibs, which take too long too compile :)
no prob. Just ask a friend who has KDE installed to send you a
tarball
of his installation.
I have KDE
Hi everybody,
sorry for the OT. I've been using debug.exe (a little program for work
with asm) at my college to learn about assembler and related
concepts. Does anyone know some equivalent for linux?
Thanks!
--
Rodrigo Lazo (rlazo)
--
gentoo-user@gentoo.org mailing list
Daniel,Unmasking libdrm won't hurt a thing. If you're already using modular x, it's probably already installed in it's stable version. You will need a few things to get XGL running with NVidia's proprietary drivers, such as an alpha version of Mesa, new versions of glitz and much more. Checking
Those drivers work fine with a few minor changes.http://www.gentoo-wiki.com/TIP_XOrg_7.1_With_Older_NVidia_Drivers
On 7/1/06, Neil Bothwick [EMAIL PROTECTED] wrote:
On Fri, 30 Jun 2006 19:08:57 -0700, Daevid Vincent wrote: Related to this, are we all still waiting on newer nvidia drivers for the
On 7/1/06, Jean Magnan de Bornier [EMAIL PROTECTED] wrote:
i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -O2
-march=i686 -pipe -mfpmath=sse -Wall -pedantic -Werror -c
freeglut_callbacks.c -MT libglut_la-freeglut_callbacks.lo -MD -MP -MF
.deps/libglut_la-freeglut_callbacks.TPlo
On 30 Jun 2006, at 22:07, Stroller wrote:
...
Leafnode was working perfectly fine until a few days ago, then all
of a sudden when I try to grab messages from upstream I get the
following:
...
$ sudo fetchnews -vvv
Password:
fetchnews mode: get articles, get headers, get bodies,
On 7/1/06, Walter Dnes [EMAIL PROTECTED] wrote:
WARNING: //lib/modules/2.6.16-gentoo-r7/video/fglrx.ko needs unknown symbol
inter_module_register [
ok ] * Adding module to moduledb.
Regenerating /etc/ld.so.cache...
Stroller wrote:
On 30 Jun 2006, at 22:07, Stroller wrote:
...
Leafnode was working perfectly fine until a few days ago, then all of
a sudden when I try to grab messages from upstream I get the following:
...
$ sudo fetchnews -vvv
Password:
fetchnews mode: get articles, get
Hello all,
I read through most of the X11 related messages so hopefully I am not repeating
something already
solved.
Basically emerge drops out with the following error:
makedepend: warning: glcontextmodes.c (reading
/usr/X11R6/include/bits/types.h, line 31): cannot
find include file
On Sat, 2006-07-01 at 19:12 -0500, Rodrigo Lazo wrote:
Hi everybody,
sorry for the OT. I've been using debug.exe (a little program for work
with asm) at my college to learn about assembler and related
concepts. Does anyone know some equivalent for linux?
Thanks!
--
Rodrigo Lazo
On Sun, Юли 2, 2006 1:40 am, Neil Bothwick wrote:
On Sat, 01 Jul 2006 10:25:23 +0200, Remy Blank wrote:
- If I first emerge a package, for example kmail, with emerge kmail,
and later, during an upgrade phase, do an emerge --oneshot kmail,
will kmail be removed from world ?
That's one
I upgraded xorg-x11 on my computer today. Afterward, I wanted to run
revdep-rebuild to make sure any loose ends where tied up. It wanted to
remerge apmd, but every time it tries, I get this:
Calculating dependencies... done!
Emerging (1 of 1) sys-apps/apmd-3.2.2_p5 to /
checking ebuild
On 7/1/06, Rodrigo Lazo [EMAIL PROTECTED] wrote:
sorry for the OT. I've been using debug.exe (a little program for work
with asm) at my college to learn about assembler and related
concepts. Does anyone know some equivalent for linux?
If you want assembly on Linux, you can use 'as' to compile
Michael Sullivan [EMAIL PROTECTED] writes:
On Sat, 2006-07-01 at 19:12 -0500, Rodrigo Lazo wrote:
Hi everybody,
sorry for the OT. I've been using debug.exe (a little program for work
with asm) at my college to learn about assembler and related
concepts. Does anyone know some equivalent for
53 matches
Mail list logo