Re: XMEM annomly issues

I thinks that irrelevant when I SSAR I know it's the right address space 1 is secondary I am quite sure that the the source is primary ALET 0 I also tried it with ALET 2 which is home And that failed too Sent from my iPhone > On Jun 10, 2016, at 3:15 PM, Philippe Leite

Re: Clarification of ECBLIST

Here is one more thing the ECB has to be One a FULLWORD boundary I had a XL4 Sent from my iPhone > On Jun 9, 2016, at 10:16 AM, Zahir Hemini wrote: > > I do not have anything to add, but wish to thank those who answered to this > topic because I have learned something

Re: Clarification of ECBLIST

Boulevard, Woodcliff Lake, NJ 07677 > P: 201-930-8234 | M: 512-627-3803 > E: cblaic...@syncsort.com > > www.syncsort.com > > > > > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of michelbutz

Re: Clarification of ECBLIST

Do I have to be in key 0 to wait on ecb in CSA Sent from my iPhone > On Jun 8, 2016, at 2:11 PM, Greg Dyck <gregd...@pobox.com> wrote: > >> On 6/8/2016 7:07 AM, michelbutz wrote: >> The XMEM post is being done from a FRR resulting from an abend in a SRB the >> SR

Re: Clarification of ECBLIST

ys, show you code. > > You can SLIP for an abend in SRB mode and see what it shows. > > On Wed, 8 Jun 2016 10:07:54 -0400 michelbutz <michealb...@comcast.net> wrote: > > :>The XMEM post is being done from a FRR resulting from an abend in a SRB the > SRB i

Re: Clarification of ECBLIST

e used if the home > address space is not the waiting address space. > > On Wed, 8 Jun 2016 09:03:45 -0400 michelbutz <michealb...@comcast.net> wrote: > > :>I'll double check the wait bit X'80' is on after the wait thanks > :> > :>Sent from my iPhone > :> &g

Re: Clarification of ECBLIST

I'll double check the wait bit X'80' is on after the wait thanks Sent from my iPhone > On Jun 8, 2016, at 9:00 AM, John McKown <john.archie.mck...@gmail.com> wrote: > >> On Tue, Jun 7, 2016 at 9:17 PM, michelbutz <michealb...@comcast.net> wrote: >> >&

Clarification of ECBLIST

Hi The documentation says for ECBLIST All ecb's must be in the home address Space. Does that mean addressable from the Hone address space As I have 1 ecb's in the home address space And 1 in CSA Thanks Sent from my iPhone

Re: SRB SUSPEND exit curiosity

Can someone tell me what the advantage of this Is then using IEAVPSE2 is it performance I think they both set up a SSRB Sent from my iPhone > On Jun 7, 2016, at 11:27 AM, Greg Dyck wrote: > > On 6/6/2016 6:54 AM, Steve Smith wrote: > > I'm wondering what an SRB SUSPEND

Re: Release code paramter of IEAVRLS2

Does it have to be a different value on every call Sent from my iPhone > On Jun 3, 2016, at 1:14 AM, Greg Dyck <gregd...@pobox.com> wrote: > >> On 6/2/2016 9:43 PM, michelbutz wrote: >> So it is the same parm as the one in the pause > > Yes. > >

Re: Release code paramter of IEAVRLS2

So it is the same parm as the one in the pause Sent from my iPhone > On Jun 3, 2016, at 12:00 AM, Greg Dyck wrote: > >> On 6/2/2016 7:08 PM, michealbutz wrote: >> I have a question about the 3rd paramter of IEAVRLS2 target_du_release_code >> it is specfied as 4 bytes. Is

Re: TCPIP Help

Can I ask you another question did you get z/OS 2.2 from zpdt as I am still waiting Thanks Sent from my iPhone > On Jun 1, 2016, at 10:21 AM, Scott Ford wrote: > > All: > > I need some help guys/gals. I have installed z/OS 2.2 under z/PDT and have > a wierd issue. I

Re: SUSPEND/RESUME is slower than WAIT/POST. PAUSE/RELEASE is slower than both.

Can you tell us the following What type of processor The work load What version of z/OS these are relevant factors Sent from my iPhone > On May 26, 2016, at 1:29 PM, Jerry Callen wrote: > > (A very delayed follow-up on a thread from yesteryear...) > > tl;dr: In

Re: XMEM and Swap ability

IARVSERV > > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of michelbutz > Sent: Tuesday, May 17, 2016 12:59 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: XMEM and Swap ability > > So the face tha

Re: XMEM and Swap ability

So the face that a SRB is running in space #2 Would automatically mKe it swapped in ? If I had to go thru all that trouble of writing A routine I would rather XMEM post space #2 to do A SYSEVENT TRANSWAP Sent from my iPhone > On May 15, 2016, at 3:59 PM, Ed Jaffe

Can a FRR routine be in the SASN address space

Hi The documentation states that SETFRR can be issued ASC AR mode and PASN |= SASN |= HASN so can the recovery routine itself be in a secondary address space I am taking protecting the code in the primary address space Thanks Sent from my iPhone

Re: XMEM and Swap ability

Forget about my design how about A general XMEM question what the point if You are going to get S0C4 Sent from my iPhone > On May 15, 2016, at 2:30 PM, Binyamin Dissen > wrote: > > On Sun, 15 May 2016 14:12:39 -0400 michealbutz > wrote: >

Re: Strange out out from OBTAIN

Thanks Sent from my iPhone > On May 10, 2016, at 3:36 PM, Gerhard Postpischil <gerha...@charter.net> wrote: > >> On 5/10/2016 2:18 PM, michelbutz wrote: >> Using an example in the DFSSMS advanced services guide I got strange >> output from OBTAIN With CAMLST >

Re: Dataset space information

> > What information are you trying to get, exactly? > > michelbutz wrote: >> Hi >> >> I need to obtain dataset space information > > > -- > John Eells > IBM Poughkeepsie > ee...@us.ibm.com > > --

Strange out out from OBTAIN

Hi Using an example in the DFSSMS advanced services guide I got strange output from OBTAIN With CAMLST OBTAIN DSCB DSCB. CAMLST SEARCH,DSABC,VOL,WORKAREA DSABC. DC. CL44'data.set.name' VOL. DC. CL6'VOLSER' WORKAREA DS CL140 Register 15 returned a zero WORKAREA pointed to

Re: z10BC Mainframe Available in Connecticut for *Your* Basement

I didn't catch the initial e-mail thread what did he pay and what is his monthly electrical bill Sent from my iPhone > On May 6, 2016, at 10:55 AM, Timothy Sipples wrote: > > For those of you who would like to attempt to recreate Connor's feat, > especially if you have

Re: Dataset space information

For CVAF I need the DEB of the VTOC Sent from my iPhone > On May 3, 2016, at 7:24 PM, Mike Shaw <techsupp...@quickref.com> wrote: > >> On 5/3/2016 11:29 AM, michelbutz wrote: >> Hi >> .. > > Michael, since you said "...what is the VTOC...&quo

Re: SRB dispatching question

Thanks I am going to try the GTF trace Sent from my iPhone > On May 3, 2016, at 9:02 AM, Blaicher, Christopher Y. > wrote: > > Peter, > Obviously I didn't fully put on my thinking cap yesterday when I mentioned > the LOCAL LOCK. > > I was attempting to think of what

Re: Dataset space information

Back in the '60s, this sort of thing was in the System Programmer's Guide. > It may be in Using Datasets or something similar now. > > However , you've lost me now. I don't know why you need the DEB. But you > should be able to get to it from the DCB. > > Sent from my iPhon

Re: Dataset space information

e key you are interested in. > > Sent from my iPhone > >> On May 3, 2016, at 15:11, michelbutz <michealb...@comcast.net> wrote: >> >> Something strange is bombed on the open >> Message IEC141I the dataset it in the message is sys1.vtoc >> The DCB whose DSC

Re: Dataset space information

he RDJFCB first, *then* move the 44X'4' to JFCBDSNM. > > Sent from my iPhone > >> On May 3, 2016, at 14:30, michelbutz <michealb...@comcast.net> wrote: >> >> I am still getting return code 4 in R15 CVSTAT is 8 >> >> I first move 44X'04' to JFCBDSNM

Re: Dataset space information

I am still getting return code 4 in R15 CVSTAT is 8 I first move 44X'04' to JFCBDSNM I then do a READJFCB FILE Everything is okay I get R15 = 0 I then do OPEN FILE,TYPE=J R15 = 0 I then do ICM. R11,B'0111',DCBDEBA XC BUFLIST(BFLHLN+BFLELN),BUFLIST OI BFLHFL,BFLHDSCB MVI. BFLHNOE,1 LA.

Re: Dataset space information

gt; wrote: > >> On Tue, May 3, 2016 at 10:54 AM, michelbutz <michealb...@comcast.net> wrote: >> >> I am sorry dont understand what is the VTOC >> Dataset name, there is another dataset on that volume sys1.vvds.v >> concentrated to the volser > > ​SYS1.VTOC

Re: Dataset space information

> >> On May 3, 2016, at 11:30, michelbutz <michealb...@comcast.net> wrote: >> >> Hi >> >> I need to obtain dataset space information >> >> I have been looking at the DFSMS advanced services and there seems like a >> few away of goi

Dataset space information

Hi I need to obtain dataset space information I have been looking at the DFSMS advanced services and there seems like a few away of going about this The OBTAIN and camlist seems like the easiest As all it needs is a dataset name and volser The CVAF macros seems like the must current But I

Re: SRB dispatching question

Thanks so much the documentation for IEAVPSE2 says "NO LOCKS HELD" Sent from my iPhone > On May 3, 2016, at 7:50 AM, Peter Relson wrote: > > I'll point out that the very fact that a global SRB paused very likely > means that you did not consider the SRB itself truly to be

Re: SRB dispatching question

nt > Syncsort Incorporated > 50 Tice Boulevard, Woodcliff Lake, NJ 07677 > P: 201-930-8234 | M: 512-627-3803 > E: cblaic...@syncsort.com > > www.syncsort.com > > > > > > -Original Message----- > From: IBM Mainframe Discussion List [mailt

SRB dispatching question

Hi If a nonpreamtable scope=global SRB does a pause And another SRB is scheduled does it get dispatched ? Sent from my iPhone -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to

Re: UCBSCAN and LSPACE

Once I check for Dasd UCB Got it working thanks Sent from my iPhone > On Apr 28, 2016, at 9:12 PM, Gerhard Postpischil <gerha...@charter.net> wrote: > >> On 4/27/2016 3:10 PM, michelbutz wrote: >> Can any one of the parameters returned by UCBSCAN be used with LSPA

Re: UCBSCAN and LSPACE

iginal Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Gerhard Postpischil > Sent: Thursday, April 28, 2016 6:13 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: UCBSCAN and LSPACE > >> On 4/27/2016 3:10 PM, michelbutz wrote: &g

UCBSCAN and LSPACE

Hi Can any one of the parameters returned by UCBSCAN be used with LSPACE As ucbscan returns different parts of the UCB Thanks Sent from my iPhone -- For IBM-MAIN subscribe / signoff / archive access instructions, send email

Re: CSSMTP sorry for the typo

Sent from my iPhone > On Mar 24, 2016, at 8:27 PM, michelbutz <michealb...@comcast.net> wrote: > > Hi > > Does anyone know if you can use CSSTMP > > To put text in the body of the e-mail > > Have found anything like a CSSTMP users guide anywhere >

CSSTMP

Hi Does anyone know if you can use CSSTMP To put text in the body of the e-mail Have found anything like a CSSTMP users guide anywhere Thanks Sent from my iPhone -- For IBM-MAIN subscribe / signoff / archive access

Re: Acessing storage in a other address space

Thanks The only thing STORAGE shouldn't return zero If the address space is swapped out Thanks Sent from my iPhone > On Jan 4, 2016, at 5:12 AM, Rob Scott wrote: > > Search the archives for IBM-Main as this has been discussed several times. > > Using CHKEAX=NO on

Searching archives 1986-2004

Hi I registered a e-mail and password however I can search IBM-main But not the archives 1986-2004 Thanks Sent from my iPhone -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to

Re: Searching archives 1986-2004

I registered my e-mail and password but it gives me a message I am *not authorized* Sent from my iPhone > On Jan 4, 2016, at 12:04 PM, Elardus Engelbrecht > <elardus.engelbre...@sita.co.za> wrote: > > michelbutz wrote: > >> I registered a e-mail and password ho

IEAVAPE2/IEAVPSE2 for SRB

Hi I have two questions regarding the following services used to suspend a SRB First if IEAVPSE2 suspends a SRB Then it in fact Works like a WAIT execution stops after the SVC 2 from wait and BASR from IEAVPSE2 So how would the updated STOKEN get returned Second IEAVAPE2 has a parameter for

Re: SRB And Enclave SRB

rwe's seminal work on the subject described at > ftp://public.dhe.ibm.com/s390/zos/wlm/WLMpresrb.pdf. > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of michelbutz > Sent: Wednesday, November 04, 2015 1:39 PM > To:

Re: SRB And Enclave SRB

, an enclave srb is associated with a work load management > enclave. > > > >> On Wed, Nov 4, 2015 at 10:39 AM, michelbutz <michealb...@comcast.net> wrote: >> >> Hi >> >> Can someone on the list point me to where I might find the dif

SRB And Enclave SRB

Hi Can someone on the list point me to where I might find the differences between the above two Thanks Sent from my iPhone -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to

Re: I am looking for a new contract/job

Each vendor ASG,SyncSort (in fact Chris B. Forgot his last name principle @ SyncSort said they were looking ) has careers would think with your experience they would take you with out question I'll be in Israel next May I am thinking of buying an apt in Jerusalem would like to make aliah

Re: (External):Re: Fwd: Bank’s severance deal indebts laid off IT workers to be ‘on call’ for 2 years of tech support — without pay

What about the tax issue Think severance and employment are taxed differently I think severance is at higher tax rate Sent from my iPhone > On Oct 22, 2015, at 5:21 PM, J O Skip Robinson > wrote: > > I've never heard that a severance package is required by law in

Re: AW: Re: IEAVAPE2/IEAVPSE2 another address space

I would like to know the what rules are for posting Let IBMMAIN require proof of IDENTITY I didn't see that anywhere Are *YOU* sure everybody is who they say they are And Please don't misspell my name its Joseph With PH not with a F Sent from my iPhone > On Oct 19, 2015, at 1:45 AM, Peter

Re: IEAVAPE2/IEAVPSE2 another address space

I meant no disrespect my apologies To Peter Relson Sent from my iPhone > On Oct 19, 2015, at 11:42 AM, John McKown > wrote: > > On Mon, Oct 19, 2015 at 10:12 AM, Tom Marchant < > 000a2a8c2020-dmarc-requ...@listserv.ua.edu> wrote: > >> On Sat, 17 Oct 2015

Re: IEAVAPE2/IEAVPSE2 another address space

eamacn...@yahoo.ca> wrote: > > So, why michelbutz? > > > - > -teD > - > Original Message > From: michelbutz > Sent: Saturday, October 17, 2015 19:44 > To: IBM-MAIN@LISTSERV.UA.EDU > Reply To: IBM Mainframe Discussion List > Subject: Re: IEAVAPE2/IEAVPSE2 an

Re: IEAVAPE2/IEAVPSE2 another address space

Thank you My real name is Joseph Reichman And I have licensed copy of RD Sent from my iPhone On Oct 17, 2015, at 10:17 AM, Peter Relson wrote: >> Waiting for the likes of Pete Relson to chime in > > I tend not to chime in when a poster does not have the courtesy to the >

Re: IEAVAPE2/IEAVPSE2 another address space

Yes I'm using 2.1 Waiting for the likes of Pete Relson to chime in Thanks so much Sent from my iPhone > On Oct 16, 2015, at 10:58 AM, John McKown > wrote: > > Well, the URL that I'm reading is >

Re: IEAVAPE2/IEAVPSE2 another address space

ri, Oct 16, 2015 at 8:17 AM, michelbutz <michealb...@comcast.net> wrote: >> >> >> Yes I'm using 2.1 >> >> Waiting for the likes of Pete Relson to chime in >> >> Thanks so much >> >> Sent from my iPhone >> >>>> O

Re: What is a request block prefix?

It's in the data areas for RB IHARB the RB like TCB Seems to have a prefix Sent from my iPhone > On Oct 13, 2015, at 5:01 PM, Lindy Mayfield wrote: > > In the system completion codes documentation it says that for an abend FDB > that register 2 points to the request

Address Swap question

Hi Was just wondering does an address space Need to be swapped in for any code be running in It Thanks Sent from my iPhone -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to

Debug Tool question

Hi I'm trying to make a breakpoint when register 3 displacement 14 is not equal x'30' This statement doesn't seem to work At statement number when %gpr3->+14 ~= x'30' I don't have the symbol for not x'5f' on my iPhone But the above statement passes the debug tool Parser but it still stops

Re: Catalog entry not visible

Is IKJ tso ? Sent from my iPhone On Aug 26, 2015, at 3:53 PM, Lizette Koehler stars...@mindspring.com wrote: Can you do 3.4 on the dataset? If so, when you press PF11 - does it show any details? Is there more than one LPAR involved? Is the Alias and ucat connected if there is more

Re: S0C4 running Disasembler ASMDASM

There are two loadlibs with ASMDASM apparently The one with HLA.SA Works Thanks Sent from my iPhone On Aug 25, 2015, at 11:19 AM, Lucas Rosalen rosalen.lu...@gmail.com wrote: I've never run ASMDASM but could you try to move the input in SYSIN DD to column 2? Lucas Did you open

Fwd: Console messages which has precedence and related questions

Sorry I don't know if I replied to the group My apologizes if I didn't Sent from my iPhone Begin forwarded message: From: michelbutz michealb...@comcast.net Date: August 19, 2015 at 12:55:30 PM EDT To: Peter Fatzinger f...@us.ibm.com Subject: Re: Console messages which has precedence

Re: Console messages which has precedence and related questions

Thanks for responding I have set MCSOMLVL to MCSOMLR indicating I should receive all WTOR's However I have a bug in a program And when I get the following message IEE331A That I am in a disabled spin loop I fail to capture it even though it asks for a reply Meaning it's a WTOR Thanks Sent

Re: RACF syntax to permit TSO user to use TESTAUTH

PERMIT TESTAUTH CLASS(TSOAUTH) ID(TSOID) ACC(upd) Sorry someone let me know Sent from my iPhone On Aug 15, 2015, at 11:28 PM, Lizette Koehler stars...@mindspring.com wrote: Are you seeing an ICH408I Message or S913? If not, is the TESTSAUTH in the IKJTSOxx member of parmlib? Lizette

Strange 047 abend

I am getting a 047 abend running a program That runs in production The 047 abend under both TSO TEST and debug tool happens with a STC instruction which tries to Modify the 2 lengths of a AP instruction The program is NOT re-entrant Thanks Sent from my iPhone

Re: Strange 047 abend

There wasn't a dump just got a message from TEST system abend 047 I'll allocate sysudump To my TSO session Thanks Sent from my iPhone On Jul 22, 2015, at 11:42 PM, Binyamin Dissen bdis...@dissensoftware.com wrote: On Wed, 22 Jul 2015 22:39:58 -0400 michelbutz michealb...@comcast.net

Re: Strange 047 abend

Happened with both TSO TEST and debug tool I'll check the instruction storage area again to see that it is a STC instruction Thanks Sent from my iPhone On Jul 22, 2015, at 11:09 PM, Jim Mulder d10j...@us.ibm.com wrote: From: michelbutz michealb...@comcast.net To: IBM-MAIN@LISTSERV.UA.EDU

IVSK and SPKA

Hi I know that a S0C4 reason 4 occurs anytime the storage key doesn't match the PSW key bits 8 - 11 Would IVSK. R1,R2 and SPKA 0(R11) prevent this obviously one would have to be in supervisor state to this as they are both privilege inst to qualify that if the storage key is 0 Thanks in

Re: IVSK and SPKA

Yes I meant SPKA 0(1) I writing a macro the entails a wait at times it Would be hard to determine the storage key of the ECB Sent from my iPhone On Jul 8, 2015, at 11:30 PM, Binyamin Dissen bdis...@dissensoftware.com wrote: On Wed, 8 Jul 2015 17:09:54 -0400 michelbutz michealb

Re: IVSK and SPKA

I am writing a generic macro without knowing the environment Sent from my iPhone On Jul 8, 2015, at 6:38 PM, Tony Harminc t...@harminc.net wrote: On 8 July 2015 at 17:09, michelbutz michealb...@comcast.net wrote: I know that a S0C4 reason 4 occurs anytime the storage key doesn't match

Re: S0C4 At Entry to SRB routine

Thanks for your help I checked how the FRR param works R2 points to 24 bytes for my use to prime as Parameters on entry to the SRB for the FRR Sent from my iPhone On Jun 26, 2015, at 7:39 AM, Peter Relson rel...@us.ibm.com wrote: could you post what you had vs. what worked? What didn't

Re: S0C4 At Entry to SRB routine

Sorry jade Sent from my iPhone On Jun 25, 2015, at 4:25 PM, michelbutz michealb...@comcast.net wrote: Edward Jaffa help my understand my problem This was the first time I used IEAMSCHD In the past when I used SCHEDULE I cleared out the 44 byte block XC to binary zeros This included

Re: S0C4 At Entry to SRB routine

I did not have storage key parameter set correctly On IEAMSCHD Thanks Sent from my iPhone On Jun 25, 2015, at 8:21 AM, Shmuel Metz (Seymour J.) shmuel+ibm-m...@patriot.net wrote: In 000901d0ad3b$eb56bbb0$c2043310$@comcast.net, on 06/22/2015 at 06:36 PM, michealbutz

Re: S0C4 At Entry to SRB routine

It's that spellchecker on the IPhone Jaffe My apologies Edward Sent from my iPhone On Jun 25, 2015, at 4:26 PM, michelbutz michealb...@comcast.net wrote: Sorry jade Sent from my iPhone On Jun 25, 2015, at 4:25 PM, michelbutz michealb...@comcast.net wrote: Edward Jaffa help my

Re: S0C4 At Entry to SRB routine

On Jun 25, 2015, at 4:20 PM, Lizette Koehler stars...@mindspring.com wrote: To help others in the future when searching for answers; could you post what you had vs. what worked? It could be beneficial. Lizette -Original Message- From: michelbutz michealb...@comcast.net Sent

Re: Address location

I'm doing linkage=branch and holding the local lock Peter just to re-iterate R2 has the address of the FRR param before I issue IEAMSCHD Correct ? Sent from my iPhone On Jun 24, 2015, at 7:51 AM, Peter Relson rel...@us.ibm.com wrote: The VSMLOC macro might issue abend code X'C78'. The

Re: S0C4 At Entry to SRB routine

, at 12:24 PM, Tony Harminc t...@harminc.net wrote: On 23 June 2015 at 07:37, michelbutz michealb...@comcast.net wrote: Still needed subpool 228 as when I tried to access data from subpool 227 s0c4 as it is fetch protected If you have PSW key 0, how can you get an S0C4 based on fetch

Re: S0C4 At Entry to SRB routine

Edward you are very smart by rote I always XC the SRB block Thanks for making me aware Sent from my iPhone On Jun 23, 2015, at 10:24 AM, Ed Jaffe edja...@phoenixsoftware.com wrote: On 6/22/2015 10:48 PM, Elardus Engelbrecht wrote: michelbutz wrote: I always assumed SRB's run PSW key 0

Re: S0C4 At Entry to SRB routine

:37, michelbutz michealb...@comcast.net wrote: Still needed subpool 228 as when I tried to access data from subpool 227 s0c4 as it is fetch protected If you have PSW key 0, how can you get an S0C4 based on fetch protection? Can you not look at a dump and trace table to see what is actually

Re: S0C4 At Entry to SRB routine

Still needed subpool 228 as when I tried to access data from subpool 227 s0c4 as it is fetch protected 228 isn't Sent from my iPhone On Jun 22, 2015, at 7:20 PM, Mike La Martina mike.lamart...@mcleansoft.com wrote: Try Subpool 228. For some reason I always used that subpool.

Re: Address location

User's Group: www.xdc.com (on LinkedIn) Facebook: www.facebook.com/colesoftware Videos: www.youtube.com/user/colesoftware At 6/14/2015 09:46 AM, Shane Ginnane wrote: On Sun, 14 Jun 2015 01:32:26 -0400, michelbutz wrote: Given address how I can I tell whether

Re: S0C4 At Entry to SRB routine

There is keyvalue parm on IEAMSCHD I always assumed SRB's run PSW key 0 supervisor state Let my give this a shot and then try 228 Thanks Sent from my iPhone On Jun 22, 2015, at 7:20 PM, Mike La Martina mike.lamart...@mcleansoft.com wrote: Try Subpool 228. For some reason I always

Re: Address location

hoping at the very least it would give me Some sort of return code allowing me to retry The VSMLOC until I get the right storage area PVT,SQA,LSQA or CSA Thanks Sent from my iPhone On Jun 22, 2015, at 2:49 PM, Jim Mulder d10j...@us.ibm.com wrote: From: michelbutz michealb...@comcast.net To: IBM

My apologizes

To all This was my first shot at IEAMSCHD I had previously only used schedule That I took it for granted that SRB's run in key 0 Sent from my iPhone -- For IBM-MAIN subscribe / signoff / archive access instructions, send

Re: IEAMSCHD no FRR param

Software 77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA Tel: +1.781.684.2305 Email: rsc...@rs.com Web: www.rocketsoftware.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of michelbutz Sent: 14 June 2015 19:30

Re: IEAMSCHD no FRR param

This was a follow up from a suggestion of not knowing what type of storage VSMLOC was processing. I was issuing VSMLOC from an SRB And coding of PVT for a LSQA address would generate a ABEND which I would subsequently Re-try with the correct LSQA PARM in the VSMLOC I wasn't sure how to get the

Re: IEAMSCHD no FRR param

...@rs.com Web: www.rocketsoftware.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of michelbutz Sent: 14 June 2015 19:49 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IEAMSCHD no FRR param No that big of a deal I'll just prime

Re: IEAMSCHD no FRR param

Software 77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA Tel: +1.781.684.2305 Email: rsc...@rs.com Web: www.rocketsoftware.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of michelbutz Sent: 15 June 2015 15:50 To: IBM

Re: IEAMSCHD no FRR param

Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA Tel: +1.781.684.2305 Email: rsc...@rs.com Web: www.rocketsoftware.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of michelbutz Sent: 15 June 2015 13:34 To: IBM-MAIN

Re: IEAMSCHD no FRR param

Of michelbutz Sent: 15 June 2015 16:56 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IEAMSCHD no FRR param When The FRR parameter area which R2 points to Is 24 bit ? Just makes life more difficult Sent from my iPhone On Jun 15, 2015, at 11:02 AM, Rob Scott rsc...@rocketsoftware.com wrote

Re: Address location

Were you I get that info is that in the LDA ? Sent from my iPhone On Jun 14, 2015, at 9:08 AM, Robert A. Rosenberg hal9...@panix.com wrote: At 04:51 -0500 on 06/14/2015, Elardus Engelbrecht wrote about Re: Address location: michelbutz wrote: CSMLOC only takes one of those

Re: Address location

Thanks Sent from my iPhone On Jun 14, 2015, at 9:46 AM, Shane Ginnane ibm-m...@tpg.com.au wrote: On Sun, 14 Jun 2015 01:32:26 -0400, michelbutz wrote: Given address how I can I tell whether this is SQA LSQA PVT, or CSA GDA. Shane

Re: Address location

It's in a other address space to I'm using a SRB I am at 2.1 I guess I have to set up a FRR and check for a C78 ABEND Sent from my iPhone On Jun 14, 2015, at 5:51 AM, Elardus Engelbrecht elardus.engelbre...@sita.co.za wrote: michelbutz wrote: CSMLOC only takes one of those as the first

Re: Address location

CSMLOC only takes one of those as the first parameters I would have to know whether it is SQA LSQA PVT. Or CSA before Sent from my iPhone On Jun 14, 2015, at 2:05 AM, Binyamin Dissen bdis...@dissensoftware.com wrote: VSMLOC On Sun, 14 Jun 2015 01:32:26 -0400 michelbutz michealb

Re: Address location/GDA is for common

GDA is for common storage I think I need the LDA for private Sent from my iPhone On Jun 14, 2015, at 9:46 AM, Shane Ginnane ibm-m...@tpg.com.au wrote: On Sun, 14 Jun 2015 01:32:26 -0400, michelbutz wrote: Given address how I can I tell whether this is SQA LSQA PVT, or CSA GDA

IEAMSCHD no FRR param

The IEAMSCHD has a FRRADDR parm But doesn't have an input param for paramters to FRR routine Sent from my iPhone -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the

Re: IEAMSCHD no FRR param

prior to the completion of its processing. Lizette -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of michelbutz Sent: Sunday, June 14, 2015 11:30 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: IEAMSCHD no FRR param The IEAMSCHD

Address location

Given address how I can I tell whether this is SQA LSQA PVT, or CSA Thanks Sent from my iPhone -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO

Re: Debug tool conditional breakpoint in asm

question? If not, please contact me directly. Ken Hume kph...@us.ibm.com (720) 396-7776 -Original Message- From: michelbutz Sent: Wednesday, May 27, 2015 12:39 PM Newsgroups: bit.listserv.ibm-main To: IBM-MAIN@LISTSERV.UA.EDU Subject: Debug tool conditional breakpoint in asm

Re: Unable to get dump under TESTAUTH

Thanks Sent from my iPhone On Jun 4, 2015, at 11:26 AM, Tony Harminc t...@harminc.net wrote: On 3 June 2015 at 11:27, michealbutz michealb...@comcast.net wrote: I am getting a S0C1 debugging my program under TESTAUTH when I do a Where to see where I bombed It display's a 31 bit private

Debug tool conditional breakpoint in asm

Has Anyone had any success using conditional Break points with debug tool in assembler The following At 435 when(%R4- = 'MIKE') Lead me to believe stop 435 when the contents of Register 4 is equal to MIKE but the code seemed To stop at 435 every time Sent from my iPhone

Re: Parm field for debug tool

used to communicate with Debug Tool COUNTRY to specify a country code for Debug Tool TRAP to specify whether Debug Tool is to intercept abends. Does this help? Lizette -Original Message- From: michelbutz michealb...@comcast.net Sent: May 19, 2015 5:13 PM To: IBM

Parm field for debug tool

Hi Anyone know how to use the parm field for debug Tool to pass info to the program I am having all sorts of issues EXEC PGM=EQANMDBG,PARM= Sent from my iPhone -- For IBM-MAIN subscribe / signoff / archive access

  1   2   >