I think you can specify the volsers you just want to read --
VOL=SER=(UC4622,UI0455).
This may cause an error but you will have the data needed .
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Lizette Koehler
Sent: Tuesday,
This is from IBM:
Figure 1. Sample job to copy the physical blocks of an aggregate to a larger
data set//SUIMGVMB JOB ,'EXPAND AGGR WITH REPRO',
// CLASS=A,MSGCLASS=X,MSGLEVEL=(1,1)
//DEFINE EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=H
//SYSINDD *
DEFINE CLUSTER (NAME(PLEX
Is it being picked up by a product like SAR ?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of McCabe, Ron
Sent: Friday, March 01, 2019 11:27 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: $HASP250 JOB Purged
No it is not.
Thanks,
Ron M
Does anyone have z/OSMF active using TSS (Top Secret) ? I have been using the
"Convert z/OS 2.3 member IZUSEC from RACF to TSS commands".
z/OSMF still has problems activating - I would like to see how other sites have
setup the ID's IBM requires.
My main concern is IZUADMIN. The documentation
Anyone on this list have experience upgrading Compuware ISPW from v17 to v18?
Is there a listserv for Compuware and / or ISPW ?
Google couldn't find anything.
Thank You
*** Disclaimer ***
This communication (including all attachments) is solely for the use of the
person to whom it is addresse
Add TIME=1440 to the EXEC DD.
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Skippy the Ancient
Sent: Friday, July 24, 2020 2:48 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Started task stopping immediately. No error messages.
ATTENTION: This e-mail came from
I have this edit macro EICUPDT:
* Top of Data
ISREDIT MACRO (NUM1)
ISREDIT COPY EICLIST 20 20 BEFORE 1
ISREDIT COPY EICLIST &NUM1 &NUM1 BEFORE 1
EXIT: +
EXIT CODE(0)
Bottom of Data **
When I am in a edit member session and I en
Send again hope it keeps the formatting.
I have this edit macro EICUPDT:
* Top of Data
ISREDIT MACRO (NUM1)
ISREDIT COPY EICLIST 20 20 BEFORE 1
ISREDIT COPY EICLIST &NUM1 &NUM1 BEFORE 1
EXIT: +
EXIT CODE(0)
Bottom of Data **
W
quot;.
So, you might have two different versions, one for batch and one for online.
Second, when you run ISREDIT in batch, you have to use a macro to supply the
input. So, you'll probably need to rethink how youre invoking ISREDIT in batch.
Joe
On Thu, Aug 6, 2020 at 5:40 PM Steely.Mark
I got this request from a customer:
I need a keyring on the SYSX top secret database for XXID01. I have a
Certificate Authority key at XX.CER
and a personal key at XX.PFX.
This is for SMPE RECEIVE ORDER processing.
What are the steps to get this setup. I did execute a CHKCERT on XX.
Here is a simple REXX for LISTDSI:
/* A SIMPLE REXX TEST PROGRAM */
variable = 'data.set.name'
x = LISTDSI(variable)
say x
say SYSDSNAME
say SYSVOLUME
say SYSUNIT
say
Received this message: IGD17002I NO ROOM IN VTOC OR VTOC INDEX ON VOLUME XX
FOR DATA SET
xx.x.xx
I understand the message.
Is there a way to display the used percentage of the VTOC & VTOC INDEX ?
>From option 3.4 (D
If any one on the list uses PKWARE Smartcrypt for z/OS for PGP encryption would
you please respond to me off the list.
Thank You
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.
We are z/OS V2.4. I am trying to download a software instance and z/OSMF has
generated the JCL. The JCL generated has some values that are not correct -
some path's that were generated either have my ID inserted with the ID being
uppercase - our path names are lowercase. Also one path it genera
Thanks - - The IZUPRMxx reference information - fixed one of the issue's
This fixed the 2nd issue - that's was what I needed the
UNIX directory name - missed it the first time around. Still trying to get
familiar with it.
Thanks for all the assistance.
-Original Mess
Has anyone done this ? I have been task with setting up this environment and
to provide some code to access this environment.
I have been following the Kerberso Section in the TSS Administrating Guide.
I am at the point of Map Foreign Environments/Realms.
I don't understand exactly what is
I set up a Kerberos Environment using TSS (Top Secret) . I would like to test
it out and found this program.
IDENTIFICATION DIVISION.
PROGRAM-ID. KerberosAccess.
DATA DIVISION.
WORKING-STORAGE SECTION.
01 Service-Principal-Name PIC X(128).
01 User-Name PIC X(128).
01 Password PIC X(128).
01 Ticke
I would like to check each member of a PDS and if it is empty (0 Lines) - I
would like to add a line with the text of *NONE*.
I would like to do this in batch using this format:
//TSOBTCH1 EXEC PGM=IKJEFT01
//SYSTSPRT DD SYSOUT=*
//SYSLIST DD SYSOUT=*
//ISPLOGDD DSN=&ISPLOG,
//
SENDER! STOP, ASSESS, AND VERIFY Do you know this person?
Were you expecting this email? If not, report it using the Report Phishing
Button!
On Tue, 9 Jan 2024 22:41:50 +, Steely.Mark wrote:
>I would like to check each member of a PDS and if it is empty (0 Lines) - I
>would like to
Does anyone on the list-serv have this setup? Compuware z/Adviser and CA Top
Secret (TSS)
I would like to ask for assistance offline from the list-serv (no offense).
Thank You
*** Disclaimer ***
This communication (including all attachments) is solely for the use of the
person to whom it is
Does someone have a program that can be shared - that will list all TSO sign-on
?
I know it is SMF 80 record. I can write a program but I don't want to re-invent
the wheel.
The program can be SAS, EARL, ASM etc
We are z/OS v2.2 and TSS v16. I looked at TSSUTIL but it only listed violations.
I have 2 ZFS files I would like to compare. I have tried the diff command but
that has length limit of 2048 and does not compare binary files.
What else is available ?
z/OS v2.2
Thank You
*** Disclaimer ***
This communication (including all attachments) is solely for the use of the
person to
ehalf
Of Steely.Mark
Sent: Tuesday, December 17, 2019 12:23 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: ZFS Files Compare
I have 2 ZFS files I would like to compare. I have tried the diff command but
that has length limit of 2048 and does not compare binary files.
What else is available ?
z/OS v2.2
There used to be a CICS ID sample report that Omegamon provided. REPORT USERID
DETAIL
We are currently Omegamon 5.5 and CICS TS 5.2 and z/OS v2.2. .
All the documentation I have found reference members and proc's that are not in
the documented file.
I have search all the libraries looking for
Has anyone upgraded from MQ 9.0 to 9.2 ?
Is there any PTF's that need to be applied to 9.0 before going to 9.2. This is
the only thing I have found:
While at MQ 9.0, take a full backup of the queue managers. Why? Because the
upgrade process is NOT reversible. If you need to revert back from MQ
S, you could go from 9.0 to 9.1 and back to 9.0 without losing
any messages.
On Tue, 27 Apr 2021 at 16:52, Steely.Mark wrote:
> Has anyone upgraded from MQ 9.0 to 9.2 ?
>
> Is there any PTF's that need to be applied to 9.0 before going to 9.2.
> This is the only thing I ha
This is a general question what do you use for software inventory - package,
ISPF, excel spreadsheet etc for Mainframe only.
Below is the type of inventory I am looking for.
This is what I found so far on the Internet : (This is a PDF document and looks
a lot better then what is displayed
There was a SMF program which I downloaded from CBT along time ago. This SMF
program had parms you could provide. The report would provide a lot of job
information.
I thought it was DAF - but that doesn't look like what I remember.
I have seen it mention here before but I was unable to find it.
Steely.Mark
Sent: Monday, May 24, 2021 12:20 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: CBT - SMF
There was a SMF program which I downloaded from CBT along time ago. This SMF
program had parms you could provide. The report would provide a lot of job
information.
I thought it was DAF - but that doesn&#
Issue command ISPLIBD on the command line.
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of Bob
Bridges
Sent: Friday, June 11, 2021 11:21 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Can I sense the LIBDEF status?
ATTENTION: This e-mail came from an external sour
I am trying to test the BACKMIG of MQ V9.2.
The directions says to use the START QMGR command.
For some reason I can't get this to work. To tired.
This is command I usually use to start the QMGR: +MQSI START QMGR
PARM(MQSIZPRM)
I did try this command: +MQSI START QMGR PARM(MQSIZPRM) BACKMIG(900
I am trying to read SMF data using COBOL for z/OS 4.2.0. This setup use to
work but that was in a past life.
This input is Record Format. . . : VBS, Record Length. . . : 32760 & Block Size
. . . : 32760. Program IFASMFDP
Cobol File Section:
FD SMF-RECORDS-IN
RECORDING MODE S
LABEL
The solution was to change the file system to :
FD SMF-RECORDS-IN
RECORDING MODE S
LABEL RECORDS ARE STANDARD
BLOCK CONTAINS 0 CHARACTERS Change this to 0 char
RECORD CONTAINS 0 CHARACTERS
Cross posted in CA-Communities
Does anyone have a sample RESOURCE ACCESS VALIDATION EXIT (TSSINSTX)? We are
trying to determine the best way to protect keys in ICSF. We have a resource
class defined as CSFKEYS. The CICS regions are bypassing the CSFKEYS check due
to the option of NORESCHK. Can
I have several keys defined in the CKDS.
I have been able to rename the keys using program CSFKGUP and refresh the keys
using program CSFEUTIL.
I would like to make a copy of a key and rename it and store it in the CKDS.
EX. Keya.test copy and make Keyb.test. Both keys are now available
I was trying to rename a key in the CKDS. I was using PGM=CSFKGUP,PARM=('SSM').
I received this error:
The master key verification patterns in the CKDS do not match the
verification patterns of the active DES and AES master keys.
We do not have any crypto hardware and no coprocessor's defined.
Sent: Wednesday, May 10, 2017 5:09 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: ICSF Again
Can you show the job output? And are you able to get into ICSF panels?
What are your installation options?
Dan
--
On May 10, 2017, 12:51 PM -0400, Steely.
I know this has been discussed before but I can't find anything that I am
looking for.
The only thing I found close was SDSFEXT from file 313 on the CBTAPE.
I would like the batch SDSF job to perform PREFIX CICS*. Then DA. Then from
that list print the JESMSGLG from each one listed.
I have b
We are in the process of going to Cobol V6.3. We are taking our current process
and trying to make the updates required for 6.3.
When a program is compiled the OBJECT compile option is used - which creates a
SYSLIN file.
The SYSLIN files look completely different between the two versions.
V4.2
Did you try to just do a delete noscratch command ?
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of Max
Smith
Sent: Monday, February 21, 2022 4:00 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Unable to delete uncataloged migrated datasets
ATTENTION: This e-mail came
Go to Settings - Identifier (Top Line) - Option 4 Screen Name - Put a / in
front of Display system name and option 2 for default setting for SYSNAME.
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of Ed
Jaffe
Sent: Thursday, February 24, 2022 3:43 PM
To: IBM-
I would like to be able to have SDSF perform a DA and sort CPU% D every 15
seconds and store it to a file.
Does anyone have a process that does something similar - batch, started task
etc.
Thank You
*** Disclaimer ***
This communication (including all attachments) is solely for the use of
There was a program that when executed would prevent the ENQ on a dataset. This
was used for jobs which would FTP a file and then use that file in steps after
the FTP.
This was the JCL used:
//JS010 EXEC PGM=FTPDEQ,
//PARM='data.set.name.here'
//SYSUDUMP DD SYSOUT=*
This would be the
I would like to back up a directory and then execute SKULKER to clean out the
old files.
I really don't want to backup the complete HFS/ZFS file - DFDSS doesn't backup
the fie if it can't perform the quiesce on the file.
I tried using the PAX command which worked great except that it updates th
I am trying to convert our SDSF from using ISFPARMS to TSS for security.
I need some direction on how to provide security for reports.
Currently I am trying to use JESSPOOL to control access.
The customer is allowed to view all currently active and held output jobs but
may only look at certain J
40c108da3d87b17c%7Cd5f618ff295149048f7e999c2dd97ab2%7C0%7C0%7C637889950261872224%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=%2BF%2BtoZaedniGmSARZrgDspVsvtLk624fxaEllI4har0%3D&reserved=0
-Original Message-
Date:Mo
7Cd5f618ff295149048f7e999c2dd97ab2%7C0%7C0%7C637890746614106925%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ZyxHROF4eUWuXPXBbIR8Rls0H8o6qizNf9Ve6E7RWuA%3D&reserved=0
-Original Message-
Date:Tue, 24 May 2022 15:02:50 +00
To make the ZFS file one extent - you could unmount the ZFS file move it to
another volume using ADRDSSU something like this:
COPY DATASET( -
INCLUDE( -
SYSX.ZFS -
This is the way I do it all the time:
//PARMLIB EXEC PGM=ISRSUPC,
// PARM=(DELTAL,FILECMP) -this will just tell you if there
is a difference(uncomment the one you want)
//*PARM=(DELTAL,LINECMP) -
When I logon to z/OSMF all I see is 16 ICONS.
There are 2 missing icons that I need - Software Management & Software Updates.
I been through several manuals and have performed additional setup and SAF
rules that are suppose to provide this function.
Any ideas of what I can check first ?
Open
I can't believe it was that easy. The 2 Icons were there and dragged them to
the desktop.
Now the hard part starting the installation process..
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Kurt J. Quackenbush
Sent: Wednesday, July 20, 2022 6:16 PM
T
attachments or
click on links from unknown or unexpected emails.
On a RACF system it’s a cakewalk
Sent from my iPhone
No one said I could type with one thumb
> On Jul 21, 2022, at 10:06, Steely.Mark wrote:
>
> I can't believe it was that easy. The 2 Icons were there and dragged them to
Does your site use a Self Help Password Reset Tool for RACF or TSS ?
We would like the customer to be able to perform this function without
involving the Help Desk.
Any suggestions ?
Thank You
--
For IBM-MAIN subscribe / signo
You can try this REXX exec.
/* REXX -
+--+
¦ Name: LSTJOBS ¦
¦ Type: REXX exec¦
¦ Purpose:Display a list of Address Spaces t
I remember at one time IBM had a free / shareware tool that could delete bad
DSN entries. I used it a couple of times - but it has been years and I can't
remember the name or where it is.
I will keep looking.
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Check this link:
https://www.ibm.com/support/pages/vvdsfix-unsupported-vsam-utility-used-correct-problems-catalogs-and-vvds-entries
It talks about VVDS Fix utility - I am not sure if you can download it any more
- I have not been able to find a current download site.
I have the load module. I
tion on SYS1.SAMPLIB. I am going
to read and maybe give it a try.
Regards
Jack
On Wed, 31 Aug 2022 at 17:01, Steely.Mark wrote:
> Check this link:
> https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
> ibm.com%2Fsupport%2Fpages%2Fvvdsfix-unsupported-vsam-utility-us
We have z/OSMF active on one of ours LPAR's. Now we would like to add another
LPAR.
I know their were instructions on how to perform this - I am unable to find the
instructions.
If you have done this and would provide the documentation it would be
appreciated.
We are z/OS v2.4
Thank You
---
Is there a way to just shutdown JES2EDS ? (JES2 Email Delivery Services (EDS)
is a JES2 function that accepts email messages from JES2 interfaces and
delivers them to the intended recipients, the email addresses.)
I already purged all the e-mail. Would like to shutdown the task also.
Thank Y
Unless I am missing something why not use IEBCOPY with specifying DISP=SHR on
the dataset name.
I have done this with datasets that were allocated to the LNKLST.
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Radoslaw Skorupka
Sent: Friday, January 19, 202
Try this: F BPXOINIT,SHUTDOWN=FORKINIT
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Darrold Usher
Sent: Tuesday, January 23, 2024 9:27 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Cancel BPXAS
CAUTION! EXTERNAL SENDER! STOP, ASSESS, AND VERIFY Do you k
I think that process is correct - but I think there is a parm in the 7700
configuration that after a couple of days it will automatically remove the
contents of the tape.
So if that time has elapsed all you will get is a tape mark.
-Original Message-
From: IBM Mainframe Discussion Lis
The issue is with the E37 - I don't see the error code but if is an 8 this is
the possible reason:
A multi-volume physical sequential data set was being written on a direct
access device. All space was filled on the volume, and an attempt was made
to obtain space on the next specified volume. Eit
I recently received this message: GIM58903WSMP/E COULD NOT PROCESS A ++HOLD
FIXCAT MCS BECAUSE IT WOULD HAVE MADE A CHANGE TO THE GLOBAL ZONE THAT
CANNOT BE PROCESSED COMPLETELY BY PRIOR LEVELS OF SMP/E. USE
.
Your global zone must have been created with a release of SMP/E before that.
--
Tom Marchant
On Fri, 29 Mar 2024 21:59:49 +, Steely.Mark wrote:
>I recently received this message: GIM58903WSMP/E COULD NOT PROCESS A
>++HOLD FIXCAT MCS BECAUSE IT WOULD HAVE MADE A CHANGE TO THE GLOBA
tible changes to all
SMP/E data sets in that zone.
Paul
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Steely.Mark
Sent: Friday, March 29, 2024 5:49 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SMP/E
I did perform the upgrade command on the global and target zon
It is probably not good business practice - but I have never had an issue doing
that.
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Radoslaw Skorupka
Sent: Wednesday, June 12, 2024 12:54 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: PDS compress and PROCLIB
I usually just specify BYPASS(HOLDSYS) - this why you don’t have to specify
every HOLDSYS provided.
Make sure you read what the HOLD action is.
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Dave Beagle
Sent: Friday, June 14, 2024 5:30 PM
To: IBM-MAIN@L
I am trying to write a simple High level assembler program.
Would like the program just to list the volume and UCB addr.
I get the volume name, but I can't get the UCB addr.
Any help would be appreciated.
Is there a program on the CBT tape that does this.
Thank
--
At one time did IBM says that SMF reporting would also be done at the member
level. I need to find the date, time & ID a member was deleted.
If this is the case does anyone have a process to do this.
Thank You
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of Sri
h
Also check your JES PARM JOBCLASS(TSU). That has a TIME option.
Thanks
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Michael Brennan
Sent: Monday, December 28, 2020 10:21 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: TSO timeout S622
ATTENTION: This e-mail came fro
You can also try: DELETE CATALOG..NAME USERCATALOG RECOVERY
Since it was deleted with recovery you should define a new catalog and then do
the delete without the recovery.
Thank You
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Chuck Kreiter
Sent: Tuesday, J
zFS Thu Jan 26 14:45:58 EST 2017
Description: SAF CKACC returned error.
Action: The user did not have the correct permission on
We are z/OS v2.2. During a DR exercise most times a cold start is performed
for JES2. I noticed that a volume (that is currently online but not currently
used by JES2 in production) was discovered and put into use by the JES2 cold
start.
This was not a problem at DR but is there a way to spe
What about this:
//JS010 EXEC PGM=SDSF
//SYSTSPRT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SYSTERM DD SYSOUT=*
//SYSIN
We are z/OS V2.2. While I was updating the IODF It was decided to change the
Couple Facility Partition Identifier (CFA) from 8 to 9. Nothing else about that
partition was changed.
Also another CF Partition was created as CFB with Partition Identifier 9. At
this point nothing is attached to th
I have this as member WHI in SYSPROC concatenation.
PROC 1 DSN
/* CLRSCRN */
ISRDDN E &DSN
Option 3.4 enter WHI beside DSN. Provides information requested.
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Edward Fi
I have a JCL Check product that uses an EDIT Macro to check the JCL. This EDIT
Macro has been copied under different member names through the years. The
customers uses whatever process was provided when hired.
The question is can I call another edit macro within another edit macro.
Ex. JJ1 J
more simple solution is to create an ALIAS for the main entry
JJ
Then create an ALIAS JJ1, JJ2, JJ3 all pointing to JJ
Lizette
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf Of
> Steely.Mark
> Sent: Monday, October 08, 2018 3:16 PM
> To: IBM-MAIN@LISTS
To be clear, the data set is being accessed via a private DD statement: Is
this the only Dataset specified on the DD statement ?
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Gord Tomlin
Sent: Wednesday, October 17, 2018 11
When I execute a batch job which uses a JES2 init I get the following job
messages:
J E S 2 J O B L O G -- S Y S T E M X X X X -- N O
D E X X X X
09.00.18 JOB12252 FRIDAY,09 NOV 2018
09.00.18 JOB12252 TSS7000I XX0042 Last-Used 09 Nov 18 00:01 Syste
The assembler program I am working on is receiving several of these messages:
ASMA034E Operand =X' beyond active USING range by 148 bytes
I have tried all the examples to add a second register to the USING statement.
When the program executes it gets a S0C1.
Currently I have a macro call E
o:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Steely.Mark
Sent: Wednesday, November 14, 2018 4:50 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: ASMA034E
The assembler program I am working on is receiving several of these messages:
ASMA034E Operand =X' beyond active USING range by 148 bytes
I have tried a
We are z/OS v2.2 and I would like to add NON_VSAM_XTIOT=YES to DEVSUP. I have
already done this on our sandbox system without any problems.
I would like to be able to test this out. Does anyone have a program or
anything else that will allocated a dataset using XTIOT.
Any help would be apprec
Have you tried the ASSEM option on the apply.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Fred Kaptein
Sent: Monday, August 28, 2017 4:33 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Linking module in SMP/E with ++JCL
Sorry, ther
We are z/OS 2.2. For a DR test our current volumes are flashed ( I may not be
using the correct term) and we IPL from these volumes. The DR test is also
performed on a separate CPU not connected to the current environment. After the
IPL we have a process which updates several members in a PDS/E
I just executed Mergecat process over the weekend and processed several VSAM
entries and I did not have to supply any FILE DD statements.
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of esmie moo
Sent: Tuesday, September 26,
A little off topic - when is the last time anyone had to perform a SAD ? I
haven’t done one in 20+ years.
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Jesse 1 Robinson
Sent: Wednesday, September 27, 2017 4:11 PM
To: IBM
This is the steps to add and remove PDS/E from the LNKLST from an IBM document:
http://www-01.ibm.com/support/docview.wss?uid=isg3T1010789
To remove a PDSE in LNKLST:
SETPROG LNKLST,DEFINE,NAME=LNKLST2,COPYFROM=LNKLST1
SETPROG LNKLST,DELETE,NAME=LNKLST2,DSNAME=YOUR.LINKLIST.PDSE
SETPROG LNKLST,AC
I am trying to get some ICONS to be displayed. I have other icons being
displayed from one location but I can't get it to displayed from the 2nd
location.
ServerRoot "/etc/websrv1"
First location:
Options All
AllowOverride None
Do a TSO PROFILE command from option 6. It appears one of you have profile
prefix set and the other one doesn't have prefix set.
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Jesse 1 Robinson
Sent: Tuesday, October 11, 2016
You can also try to create the catalog empty. (Define UCAT)
Then catalog the ds you need and you can perform the rename.
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of John McKown
Sent: Monday, October 17, 2016 2:20 PM
To: I
I have created a new CPC image. When I click on the icon and then double click
on Customize/Delete Activation Profiles only the DEFAULTLOAD Profile is
displayed. How do I create an Image profile for this LPAR.
Any help would be appreciated.
Thanks
-
ssage-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Steely.Mark
Sent: Tuesday, October 18, 2016 16:04
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: HMC CPC Image
I have created a new CPC image. When I click on the icon and then double click
on Customize/Delete Activ
When I did that it created another load profile - I need an image profile.
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Matthew Stitt
Sent: Tuesday, October 18, 2016 4:35 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: HMC CPC
I am new to SAS - does anyone have a SAS IVP program for DB2. The non DB2
program works - need something to test DB2.
Any help would be appreciated.
Thanks
--
For IBM-MAIN subscribe / signoff / archive access instructions,
s
Behalf Of Steely.Mark
> Sent: Monday, November 07, 2016 10:15 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: SAS 9.4
>
> I am new to SAS - does anyone have a SAS IVP program for DB2. The non
> DB2 program works - need something to test DB2.
>
> Any help
Would anyone be able to provide a way to concatenate a library to the SYSPROC
allocation.
I have tried the concat program from the CBT tape file 134 that abend with a
S0c4.
I have tried a rexx exec called ALLOCREX. This sort of works ( it adds my ds to
SYSPROC) but does not keep the same setup
Thanks to everyone that replied: I think the best solution for my needs was
CONCAT from CBT File 831.
I had fun trying out all the options suggested.
Thanks again
--
For IBM-MAIN subscribe / signoff / archive access instruct
This may not be the best place to ask this but maybe someone can direct me to a
TSS listserv.
The RACF stuff needs to be converted to TSS.
I can't find anything is TSS that reference class(server).
I am new to the TSS world. We are z/OS v.2.2 and I think TSS is R15.
Any help would be appr
1 - 100 of 113 matches
Mail list logo
