On 6/29/2020 11:59 AM, Roger Bulla via KRnet wrote:
The most common failure is the mode 3A. We also have some low coverage
areas out here . So far I haven't received a nasty gram from the DOT.
Roger Bulla
+++
esner
Subject: Re: KR> ADS-B out update
On 6/28/2020 10:31 PM, Jeff Scott via KRnet wrote:
Mode 3A is a common failure with the wing tip and tail light units. It
has to do with lack of radar
On 6/28/2020 10:31 PM, Jeff Scott via KRnet wrote:
Mode 3A is a common failure with the wing tip and tail light units. It has to
do with lack of radar coverage.
Thanks, Jeff. I didn't think it w
arks
> Sent: Sunday, June 28, 2020 at 8:44 PM
> From: "Flesner via KRnet"
> To: "Flesner via KRnet"
> Cc: "Flesner"
> Subject: Re: KR> ADS-B out update
>
> On 6/28/2020 8:18 PM, Flesner via KRnet wrote:
> > There was nothing highlight
There is one more possiblity. I was trained to turn my transponder on during
run up instead of start up. I was getting short errors in my reports also and
thought I had to keep moving my antennas around more. I found out that the
error was likely from not having the transponder set to mode C on
On 6/28/2020 8:18 PM, Flesner via KRnet wrote:
There was nothing highlighted so I guess it works.
I lied !!! I went back and looked at the report and didn't realize it
was six pages long. Near the bottom there was one box highlighted in
red. It
I made a new bracket for the Skybeacon earlier today. I intended to let
the paint dry and install tomorrow but I went out after supper and paint
was almost dry enough to handle. With rain in the forecast for the rest
of the week I bit the bullet and installed the unit on the KR. The
mount
7 matches
Mail list logo
