[leaf-user] Attempting to run Bering-uClibc_6.0.2_i486_syslinux_serial19200 on Soekris Net6501

boot is completed but I never get to a logon prompt. What have I done wrong or what changes do I need to make. Andrew Gray Willowcrest Solutions Pty. Ltd. Mob: +61 418 734 078 -- Check out the vibrant tech commu

Re: [leaf-user] p9100.lrp troubles

Hi. Can you pls paste somewhere (for ex., pastebin.com) dmesg output? Also try to add to /etc/modules parport_pc and ppdev On 16.02.2017 05:40, Jim Munro wrote: > Hi, > > I'm using the p9100.lrp module on leaf bering 5.2.6. Nothing will print > to the parallel port on the leaf box. Getting

Re: [leaf-user] leaf-user Digest, Vol 117, Issue 14

ase edit your Subject line so it is more specific >> than "Re: Contents of leaf-user digest..." >> >> >> Today's Topics: >> >> 1. Re: saving dnsmasq.leases on reboot (David M Brooke) >> 2. Re: saving dnsmasq.leases on reboot (Andrew) >

Re: [leaf-user] saving dnsmasq.leases on reboot

Hi. The best solution will be set shall renew time and big lease time - but it seems like dnsmasq doesn't support renew time specifying... You may try to use some persistent-mounted partition that will store your leases (not a perfect solution, but it's suitable if this isn't a boot

Re: [leaf-user] FYI: 6.0.2-rc1 works on a PC Engines apu2c2 but with issues

fdisk/mkfs.vfat/etc is available in hdsupp.lrp On 18.01.2017 11:41, John Sager wrote: > For some years I've run leaf-bering on a PC Engines Alix 2D13 board as my > main router, but now I need to upgrade to a board that supports gigabit > ethernet, vlans, baby jumbo frames, etc. > > The apu2c2

Re: [leaf-user] [closed] Re: automatic upgrade from 5.2.4

On 03.01.2017 19:18, Erich Titl wrote: > Am 03.01.2017 um 08:07 schrieb Andrew: >> Not harder than grub :) > Really, is it documented reasonably somewhere? If so I might be inclined > to move back to it. It's documented here: http://www.syslinux.org/wiki/index.php

Re: [leaf-user] [closed] Re: automatic upgrade from 5.2.4

hi. syslinux supports multiboot too... On 02.01.2017 22:20, Erich Titl wrote: > Hi Boris > > Am 27.12.2016 um 18:32 schrieb Boris: >> Hej KP and Andrew, >> >> >> thank you both very much! >> >> Finally, I decided to make some steps in one: >>

Re: [leaf-user] automatic upgrade from 5.2.4

it should work. On 27.12.2016 10:00, Boris wrote: > Hej Andrew (sorry fpr PM) and hej list, > > thanks for your answer! Is that working for upgrade to next major > release (6.x), too? > > Boris > > Am 26.12.2016 um 19:48 schrieb Andrew: >> Just replace all files on C

Re: [leaf-user] automatic upgrade from 5.2.4

Hi. You should increase /tmp size (it can be set in leaf.cfg that is placed in the root of your storage). On 25.12.2016 16:16, Boris wrote: > Hej leaf-list, > > > Christmas is a good time to work on the box... ;-) > Merry Christmas!! > > I tried to use the automatic upgrade with my leaf-box

Re: [leaf-user] Installing Bering-uClibc on a compact flash for use in Soekris Net4501

om> wrote: > >> Great, thank you! I'll give that a shot. >> >> Ed >> >> On Tue, Dec 6, 2016 at 1:03 PM, Andrew <ni...@seti.kr.ua> wrote: >> >>> Sorry, *_isolinux_* image. >>> >>> You should also copy configdb.lrp and syslin

Re: [leaf-user] Installing Bering-uClibc on a compact flash for use in Soekris Net4501

Sorry, *_isolinux_* image. You should also copy configdb.lrp and syslinux.cfg from *_syslinux_serial19200.tar.gz (or even extract all content of it) to be able to conect via serial port to LEAF box. On 06.12.2016 22:58, Andrew wrote: > *-iso-* image. > > On 06.12.2016 22:21, edfleck

Re: [leaf-user] Installing Bering-uClibc on a compact flash for use in Soekris Net4501

*-iso-* image. On 06.12.2016 22:21, edflecko . wrote: > Cool! There's a live CD for Bering-uClibc? Where I find that because I > don't see it in the download section? > > And that will do everything I need to prep the CF? > > Ed >

Re: [leaf-user] prevent Iot from the net

You may even improve power efficiency using PSU with APFC and with lower max power (= lower standby losses in transformers) :) On 28.11.2016 03:35, jean-roch blais wrote: > Hello again List, I just revised my calculations for the power, it turns > out assuming the current pulse is square add too

Re: [leaf-user] dhcpd/dnsmasq (was Re: watchdog timer on BUC) (update)

On 24.09.2016 13:05, Erich Titl wrote: > Am 24.09.2016 um 09:06 schrieb Andrew: >> Hi. >> >> On 24.09.2016 04:22, Erich Titl wrote: >>> I never understood why the standard resolver >>> file was not used, but this is all personal preference. If dhcpcd would &g

Re: [leaf-user] dhcpd/dnsmasq (was Re: watchdog timer on BUC) (update)

Hi. On 24.09.2016 04:22, Erich Titl wrote: > I never understood why the standard resolver > file was not used, but this is all personal preference. If dhcpcd would > write to /etc/resolv.conf and dnsmasq would read from it (as it does on > my installation) then all this would is moot, because

Re: [leaf-user] dhcpd/dnsmasq (was Re: watchdog timer on BUC) (update)

Hi. Why resolv.conf is missing in that case? On 23.09.2016 14:36, Erich Titl wrote: > Am 23.09.2016 um 10:13 schrieb Erich Titl: >> Am 23.09.2016 um 00:38 schrieb Jean-Roch Blais: > ... >> As I said previously a daemon process _should_ watch its dependencies, >> often they do not and I don't

Re: [leaf-user] watchdog timer on BUC

On 22.09.2016 21:20, Jean-Roch Blais wrote: > Hello Andrew, >> Le 22 sept. 2016 à 13:53, Andrew <ni...@seti.kr.ua> a écrit : >> >> Hi. >> >> On 22.09.2016 20:32, Jean-Roch Blais wrote: >>> Hello Andrew, Erich ! >>>> Le 21 sept. 2016

Re: [leaf-user] watchdog timer on BUC

Hi. On 22.09.2016 20:32, Jean-Roch Blais wrote: > Hello Andrew, Erich ! >> Le 21 sept. 2016 à 04:52, Andrew <ni...@seti.kr.ua> a écrit : >> >> Most of boards have some kind of watchdog on board (in MIO or in south >> bridge), or some of them. For ex., iTCO_wdt f

Re: [leaf-user] watchdog timer on BUC

Most of boards have some kind of watchdog on board (in MIO or in south bridge), or some of them. For ex., iTCO_wdt for Intel, it87_wdt for ITE MIO, and so on. But built-in watchdog behavior may differ depending board model (it may reboot board, or it may just poweroff board, like ITE watchdog

Re: [leaf-user] dhcpcd broken on Buc 5.2.5 and probably on 5.2.*

Hi. On 20.09.2016 02:29, Erich Titl wrote: > Hi Jean-Roch > > Am 19.09.2016 um 19:42 schrieb Jean-Roch Blais: >> Hello Erich, >> >> thank's for your answer, I commented out background in dhcpcd.conf and voila >> ! it works as before, great ! , here is the daemon.log: (I changed my IP >>

Re: [leaf-user] PC Engines APU2 - Having Trouble Booting BuC 5.2.x

On 13.08.2016 17:31, David M Brooke wrote: > Thanks kp. > >> On 13 Aug 2016, at 13:57, kp kirchdoerfer <kap...@users.sourceforge.net> >> wrote: >> >> Am Samstag, 13. August 2016, 11:56:26 schrieb David M Brooke: >>> Thanks for the feedback. >>

Re: [leaf-user] PC Engines APU2 - Having Trouble Booting BuC 5.2.x

Hi. Try to remove 'quiet' option from kernel line. Maybe it'll say you some more info. On 12.08.2016 00:17, David M Brooke wrote: > Hi Leaf Users, > > Does anybody have experience of using the PC Engines APU2 boards with BuC > 5.2.x ? > > I have a brand new apu2c4 board with the 20160307 BIOS.

Re: [leaf-user] Update(grade) to Bering 5.x

n 07/04/16 21:34, Bob von Knobloch wrote: >> On 07/04/16 21:06, Andrew wrote: >>> You should use i486 image. Geode is for Geode LX (which is something >>> between i586 and i686). >> Thanks Andrew, >> I erroneously assumed that geode was a good word for me :=( >>

Re: [leaf-user] Update(grade) to Bering 5.x

Hi. You should use i486 image. Geode is for Geode LX (which is something between i586 and i686). 07.04.2016 21:02, Bob von Knobloch пишет: > Hi again, > > Some troubles getting Bering 5.2.4. > Firstly, I was unable to copy the LEAF files to my CF. > Linux sees it as too small for some reason

Re: [leaf-user] IPv6 and IPv4 address on VLAN interface

It seems like vlan helper script tries to add/remove iface twice, once per each iface record. 10.03.2016 21:42, Sven Kirmess пишет: > I'm trying to configure an IPv6 and an IPv4 address on a VLAN interface. > > When I configure it on a non-VLAN interface like this in > /etc/network/interfaces It

Re: [leaf-user] tc filter 'action connmark' doesn't work

Hi. Yes, I think that we should. About rate estimator - http://comments.gmane.org/gmane.linux.network/272199 description (IMHO it should be disabled by default); and IMHO we should add also htb_hysteresis parameter here. 18.02.2016 01:38, Erich Titl пишет: > Hi Andrew > > Am 17.02.2

Re: [leaf-user] tc filter 'action connmark' doesn't work

Or add sch_htb option to modprobe.conf (this is better and more common way) 17.02.2016 18:15, kp kirchdoerfer пишет: > Am Montag, 15. Februar 2016, 14:31:15 schrieb John Sager: >> I needed to apply some shaping on incoming traffic to preserve bandwidth for >> streaming services. bering-uclibc

Re: [leaf-user] successful migration - thanks!

Yes, you can build any version if you have working environment. VMXNET at least in 4.1 is in kernel, and I think that it's present in 3.10 - you just need to enable virtualization support and this driver. 15.02.2016 15:56, Robert K Coffman Jr. -Info From Data Corp. пишет: > >I've added

Re: [leaf-user] successful migration - thanks!

Hi. I've added virtio/vmxnet/hyper-v paravirtualized network/storage drivers to LEAF, so it should work enough fast as guest OS. I'll try to build it and look how it'll work. 13.02.2016 12:02, Boris пишет: > Hej list, > > > yesterday I switched my Bering 3.x to 5.2.4 by new intallation on my >

Re: [leaf-user] How do you archive shorewall logs

SSD's page size is usually hundreds of KBs. IMHO f2fs will be good choice. 07.02.2016 17:24, Sven Kirmess пишет: > My current netfilter firewall produces about 80'000 lines of log per day. > The most common line length is between 192 and 297 chars > > The Kingston SSD reports 512 byte logical

Re: [leaf-user] How do you archive shorewall logs

- with tens (or hundreds) of GBs written every day. So I think that usual MLC with some Phison/Silicon image controller will work for a years if it'll be used with fs that has TRIM support 26.01.2016 11:12, Erich Titl пишет: > Am 26.01.2016 um 09:50 schrieb Andrew: >> You can loo

Re: [leaf-user] How do you archive shorewall logs

You can look on ebay, or on chinese aliexpress. Low-capacity SSDs are enough cheap. One thing - be careful about SSD controller and memory type. Sandforce may not always work OK for a long time. And TLC memory is slightly worse than MLC. 26.01.2016 09:49, Erich Titl пишет: > Hi Sven > > Am

Re: [leaf-user] best practice to install LEAF on VMWARE ESxi

No, there's no vmware tools in build. 25.01.2016 09:20, Graziano Brioschi пишет: > Thanks Andrew and Bob > > I will try to install using IDE as disk controller and "vmxnet3" as > network driver. > Do you known if vmware tools are present in the build? > > thanks >

Re: [leaf-user] best practice to install LEAF on VMWARE ESxi

Virtualized devices are not optimal if there is a significant traffic through it. But in any case it'll be better to use NIC with VFs (like igb) or dedicated NIC for VM. 22.01.2016 20:00, Robert K Coffman Jr. -Info From Data Corp. пишет: > I used "Other Linux 32 bit" for the machine type. Make

Re: [leaf-user] best practice to install LEAF on VMWARE ESxi

Hi. Just load ISO, do HDD partitioning (256M active FAT partition is enough) and run installation from menu. 22.01.2016 19:16, Graziano Brioschi пишет: > Hi everybody, > > Are there some howtos or infos about the installation of a new LEAF > bering 5.2.3 i686 VM on ESXi? > Are there some

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

modules.tgz file, neither in the > Bering-uClibc_5.2.3_x86_64_isolinux_vga.iso nor in the > Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz distribution. > > On Sun, Jan 17, 2016 at 6:28 PM, Andrew <ni...@seti.kr.ua> wrote: > >> It seems like there's no USB 3.0 driver into initmod. Your board us

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

It seems like there's no USB 3.0 driver into initmod. Your board uses usb 3.0 on front and also has usb 2.0 inside. You may try to add XHCI driver to initmod (it's .cpio.gz package), or try to connect flash to internal USB. 17.01.2016 18:02, Sven Kirmess пишет: > I've created a USB stick from

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

16.01.2016 16:48, Sven Kirmess пишет: > I don't succeed booting Bering on my APU2B4. First I tried the Bering-uClibc_5.2.3_geode_syslinux_serial115200.tar.gz > image and got the following error message: > > This kernel requires the following features not present

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

gt; - > Loading /syslinux/linux... Loading /syslinux/linux... okok > > Loading /initrd.lrp...Loading /initrd.lrp...okok > > Loading /initmod.lrp...Loading /initmod.lrp...okok > > > > > > > > > > > > > > > > > >

Re: [leaf-user] Unable to upgrade from LEAF Bering-uClibc 5.2 to 5.2.1

Hi. Please check modules.sqfs and moddb.lrp date on storage. It seems like moddb.lrp isn't updated. If modules.sqfs is present on storage - just delete moddb.lrp 18.11.2015 21:37, Timothy Wegner пишет: > Here are some clues. > > Boot messages: > [ 31.899909] softdog: disagrees about version

Re: [leaf-user] keepalived cpu hog

Hi. Can you tell which modules are loaded bykeepalived? 20.10.2015 22:33, dino muzic пишет: > hi, > > my configuration consists in two boxes running vrrp (keepalived). > the issue was a continuous keepalived process crashing and restarting > with the following log messages : > > > deamon.log: >

Re: [leaf-user] Leaf 5.2 + alix2d3 Missing ext[23].ko.gz

Hi. ext4 module should support ext2/ext3 fs. 28.09.2015 04:05, n22e113 пишет: > Hi, Make sure to watch the Blood moon! > Thanks Leaf for v5.2. However, modules ext2 & ext3 are missing in > modules.tgz? Is this intentional? The reason I am asking is that I am still > using a CF card to store

Re: [leaf-user] temporarily allowing connections

Hi. You can try to use iptables recent module, but i slightly different way: add source ips to list for knocking to one port, and grant access for target http/ssh port corresponding to this list records. Something like http://www.snowman.net/projects/ipt_recent/ 3rd example. 06.03.2015 11:26,

Re: [leaf-user] alix2d3 + v5.1.{1,2} Intermittent Boots

-au, -ap options of busybox sendmail. 28.02.2015 15:16, Robert K Coffman Jr. -Info From Data Corp. пишет: Is there a way to send email (log file) from Leaf while using an SMTP server that requires authentication? - Bob

Re: [leaf-user] alix2d3 + v5.1.{1,2} Intermittent Boots

This isn't side effect, this is just confusing variable name :) 27.02.2015 00:38, Erich Titl пишет: Am 26.02.2015 um 18:59 schrieb Andrew: usb_wait - delay after modules loading for usb devices detection. like I assumed, side effect, he is booting from a pata device

Re: [leaf-user] alix2d3 + v5.1.{1,2} Intermittent Boots

usb_wait - delay after modules loading for usb devices detection. 26.02.2015 18:59, Erich Titl пишет: Hi Andrew Am 26.02.2015 um 11:33 schrieb Andrew: Some boards detects IDE/SATA devices with delay; increased usb_wait fixes this. But this is probably a side effect cheers ET

Re: [leaf-user] alix2d3 + v5.1.{1,2} Intermittent Boots

some tweaking. I am using grub to boot my boxes, but the driver parameters should behave the same Hello, et and Andrew, Adding 'usb_wait=2' works so far for the last two/three hours. I am also using grub 0.97x and ext2 to boot from CF. For the benefit of others here are my kernel parameters

Re: [leaf-user] alix2d3 + v5.1.{1,2} Intermittent Boots

Hi. Try to add usb_wait=3 (or more) to kernel cmdline. 25.02.2015 19:28, n22e113 пишет: Huston! We have a problem with: Bering-uClibc_5.1.{1,2}_geode_syslinux_serial115200.tar.gz Using alix2d3 with v5.1.{1,2} had resulted intermittent boots. Once in awhile, it cannot read leaf.cfg and

Re: [leaf-user] Leaf Bering Uclibc version 5.x : pptpd not working

Hi. Try to use accel-pptp (kernel-mode pptp server) or even accel-ppp (powerful pptp/pppoe/l2tp daemon like bsd's mpd) 28.01.2015 20:49, Ecran Total пишет: Hi and thank you for this good project, Sorry for my bad english J I'm leaf user's since version 2.x. on Openbrick and Soekris

Re: [leaf-user] Small shorewall issue in 5.1.3-rc1

Hi. Practical purpose for 'background' option - this is: 1) dhcpcd will not die if no carrier on WAN during boot 2) boot speedup when something is wrong in network (no lease obtained). IMHO we need to do something with shorewall - rules should be updated (at least partially) when new lease is

Re: [leaf-user] General Protection Fault in iptables.

Maybe we should include all modules required by 'standard' software (that is enabled in typical installation) to moddb? Classifiers weights tens of kb or even less... 25.11.2014 15:39, kp kirchdoerfer пишет: Hi Stirling; see shorewall FAQ 67 http://www.shorewall.net/FAQ.htm#TC From the

Re: [leaf-user] Busybox sendmail

14.11.2014 13:06, Erich Titl пишет: Hi at 11.11.2014 13:37, Andrew wrote: Hi. I've reproduced it. Actually sendmail works as expected. Yue can see paswd file in raw view - mailserver treats passwd lines as header lines because they have same structure (header-name:header-value) You should

Re: [leaf-user] Busybox sendmail

Andrew at 11.11.2014 09:14, Andrew wrote: IMHO you should open ticket on busybox trac... Yes, looks like it, have you been able to reproduce it? Thanks Erich -- Comprehensive Server Monitoring with Site24x7

Re: [leaf-user] Busybox sendmail

Hi. Piping via | (cat file | sendmail ...) also doesn't work? 10.11.2014 01:13, Erich Titl пишет: Hi Folks has anyone recently had success in piping data into BB sendmail, e.g. the mail cripple in LEAF? I tried the following sendmail -f a...@think.ch -S mailserver.think.ch i...@think.ch

Re: [leaf-user] Installation of uClibc 5.1.2-beta1

25.10.2014 04:42, Patrick Andersson пишет: Hello. I couldn't boot with the i686-kernel. It was missing MMX. if I remember correctly. I will not buy more RAM since the motherboard can't take more than 32MB. Hm, I mulled it with K6-2. What mobo do you have? Maybe you miss smth, and mobo

Re: [leaf-user] Installation of uClibc 5.1.2-beta1

Hi. K6 is i686-compatible, so you can run i686 image (due to SMP it can eat some more RAM, but it should run faster). You should buy more RAM to use all features without OOM - SDRAM costs almost nothing. CF should work ok if there is ho hw incompatibilities between CF and chipset (I don't know

Re: [leaf-user] Upgrading Many Firewalls

24.10.2014 15:39, Robert K Coffman Jr. -Info From Data Corp. пишет: On 10/23/2014 1:45 PM, Andrew wrote: something like this: for i in `ls /mnt`; do wget ftp://.../$i; done mv init* linux modules.* /moddb /mnt apkg -u *.lrp # this update configs mv * /mnt Andrew, I'll have to trace

Re: [leaf-user] using LEAF to prepare compact flash

Hi. What bin requires libiconv? 23.10.2014 20:16, Victor McAllister пишет: I run several LEAF WRAP and ALIX firewalls, but compact flashes often do not boot after they have been prepared with syslinux. I recently took some CF that failed to boot and found a way to make them work. I used a

Re: [leaf-user] Upgrading Many Firewalls

something like this: for i in `ls /mnt`; do wget ftp://.../$i; done mv init* linux modules.* /moddb /mnt apkg -u *.lrp # this update configs mv * /mnt and don't forget to update syslinux.cfg (add initmod.lrp) 23.10.2014 20:38, Robert K Coffman Jr. -Info From Data Corp. пишет: I have a number

Re: [leaf-user] Multicore Processors

20.10.2014 13:01, Art Mandler -- Skyrunner пишет: Can LEAF 5.1.1 make use of multi-core processors, or is it more efficient to run it on the fastest single core I can find? I have a router that's reaching capacity due to heavy use of pmacct traffic accounting, and I want to upgrade the

Re: [leaf-user] USB Keyboard on boot up

Other variant - to boot with serial console and run module autoprobing. 17.10.2014 13:17, Art Mandler -- Skyrunner пишет: Thanks, Simon. What I ended up doing was booting the USB drive on a different computer with a PS/2 keyboard. That enabled me to set a root password. I then booted it on

Re: [leaf-user] Bering 5.1.2B1 486 syslinux serial

Hi. 13.10.2014 09:47, Victor McAllister пишет: I tried this on an old WRAP board. Everything worked except the find modules for hardware. lrcfg complained about unavailability of modules.dep even though this file was located in /lib/modules/ and modules.tgz was available. It seems like there

Re: [leaf-user] Bering 5.1.2B1 486 syslinux serial

13.10.2014 19:48, Victor McAllister пишет: On 10/13/2014 6:53 AM, kp kirchdoerfer wrote: Am Montag, 13. Oktober 2014, 15:33:26 schrieb Erich Titl: Hi Andrew on 13.10.2014 10:32, Andrew wrote: Hi. 13.10.2014 09:47, Victor McAllister пишет: I tried this on an old WRAP board. Everything

Re: [leaf-user] Bering 5.1.2B1 486 syslinux serial

13.10.2014 21:43, Erich Titl пишет: on 13.10.2014 19:52, Andrew wrote: 13.10.2014 19:48, Victor McAllister пишет: ... Victor You should increase rootfs size. AFAIR /tmp does nothing in modules detection; modules are unpacked into /lib/modules which is part of / tmpfs. Also check if you have

Re: [leaf-user] shorewall on 5.1.1

Hi. What says 'svi iptables restart'? 07.10.2014 13:54, Erich Titl ?: Hi Folks something is amiss on my 5.1.1 installation, shorewall complains badly about it Starting Shorewall firewall: Compiling... ERROR: Your kernel/iptables do not include state match support. No version of

Re: [leaf-user] shorewall on 5.1.1

Hmm, strange. How about 'modprobe iptable_filter' ? Will it print some errors? 07.10.2014 14:46, Erich Titl ?: HI Andrew on 07.10.2014 13:25, Andrew wrote: Hi. What says 'svi iptables restart'? SALT# svi iptables restart Applying iptables firewall rules: Done. SALT# shorewall

Re: [leaf-user] shorewall on 5.1.1

Hmm, strange. They should be loaded automatically as dependencies... I'll check fresh maint branch on the test platform today. 07.10.2014 17:02, Erich Titl пишет: OK, the netfilter modules are not loaded, no surprise. I cannot use module auto detection, as there is not enough memory on that

Re: [leaf-user] shorewall on 5.1.1

I assembled commit next on 5.1.1, ce0a972..., all is working OK. Do you have enough free space on / ? Maybe depmod can't create/fill modules.dep? 07.10.2014 17:02, Erich Titl ?: on 07.10.2014 15:02, Andrew wrote: Hmm, strange. How about 'modprobe iptable_filter' ? Will it print some

Re: [leaf-user] Masquerade helper modules

06.10.2014 19:28, Art Mandler -- Skyrunner пишет: In LEAF 4 these modules were included by default in the boot up config: # Masquerading 'helper' modules # Don't remove anything here, unless you know what you are doing # Other modules available in kernel/net/ipv4/netfilter # UPD: now all is

Re: [leaf-user] Can anyone run Bering 5.1.x on Soekris net6501?

20.09.2014 22:16, Erich Titl пишет: Hi Andrew at 20.09.2014 20:13, Andrew wrote: 20.09.2014 14:07, Erich Titl пишет: ... Right. Modules aren't userland. So modules are splitted from userland initrd. I would probably argue that initrd isn't userland at all in my mindmap. For me initrd

Re: [leaf-user] Can anyone run Bering 5.1.x on Soekris net6501?

21.09.2014 21:56, Andrew пишет: 20.09.2014 22:16, Erich Titl пишет: Hi Andrew at 20.09.2014 20:13, Andrew wrote: 20.09.2014 14:07, Erich Titl пишет: Also, almost all boot loaders suport multiple ramdisks. So I don't think that it's actual trouble. M... I have not seen this for grub

Re: [leaf-user] Can anyone run Bering 5.1.x on Soekris net6501?

20.09.2014 14:07, Erich Titl пишет: Hi Andrew at 19.09.2014 20:39, Andrew wrote: 19.09.2014 15:04, Erich Titl пишет: Hi at 19.09.2014 10:35, kp kirchdoerfer wrote: Am Donnerstag, 18. September 2014, 18:59:40 schrieb Timothy Wegner: David wrote: ... Most probably it's the ehci-pci

Re: [leaf-user] Can anyone run Bering 5.1.x on Soekris net6501?

19.09.2014 15:04, Erich Titl пишет: Hi at 19.09.2014 10:35, kp kirchdoerfer wrote: Am Donnerstag, 18. September 2014, 18:59:40 schrieb Timothy Wegner: David wrote: ... Most probably it's the ehci-pci module (ehci-pci.ko.gz) which is missing. It is needed with the newer kernel in 5.1.

Re: [leaf-user] Can anyone run Bering 5.1.x on Soekris net6501?

17.09.2014 00:30, Timothy Wegner пишет: Jurgen wrote: have you upgraded your older 4801 box to version 5.1 with the geode image or also with the Bering-uClibc_5.1_x86_64_syslinux_vga.tar.gz No, I have always used the 486 image (Bering-uClibc_5.1_i486_syslinux_serial.tar.gz) with the older

Re: [leaf-user] leaf mailing list hacked?

Hi. Just google on this e-mail. It's mentioned into marc.info archives, for ex http://marc.info/?l=leaf-userm=104386045214349w=2 IMHO some bot grabbed e-mails from mailing list... 17.04.2014 15:48, Michael пишет: Just received this on my leaf only address, which has been clean for ~15 years

Re: [leaf-user] Bering-uClibc 5.0.1 booting problem

Hi. Do you write MBR code to flash? 05.10.2013 23:17, Phil Faris пишет: When I try to boot Bering-uClibc 5.0.1 on an Alix machine, I only get a few lines of gibberish and then it hangs. The terminal I am using for viewing works fine on other leaf systems. I created the system on the the 2GB

Re: [leaf-user] hdsupp

Hi. It seems like there is no enough free space into ram disk. You should just increase syst_size into leaf.cfg. 20.09.2013 16:03, Jim Munro пишет: Hi all, It seems that loading hdsupp in leaf.cfg breaks selection f)Find and load modules for hardware in the configuration menu. Noticed

Re: [leaf-user] ez-ipupdate replacement?

Hi. Maybe we should migrate to ddclient or some other binary client? It's porting should be trivial. 29.08.2013 20:01, Erich Titl пишет: Hi Bob at 29.08.2013 10:35, Bob von Knobloch wrote: ... Hi Juergen, I'm glad it worked for you. I have looked and see no need for your two changes (at

Re: [leaf-user] NIC enumeration in uclibc 5

Hi. On 05.08.2013 23:36, david M brooke wrote: Hi Rob, Since your NICs use different drivers one option is to force the drivers to load in a particular order by listing them on the kernel command line. In *linux.cfg, specify something like the following: APPEND reboot=bios

Re: [leaf-user] Interest in support for 3G / 4G wireless Internet connectivity?

22.06.2013 15:18, david M brooke пишет: On Sat, 2013-06-22 at 00:20 +0200, KP Kirchdoerfer wrote: Hi; Am 16.06.2013 21:03, schrieb david M brooke: I will certainly take of Documentation and Testing. If someone with an up-to-date BuC 4.x development environment were to prepare a

Re: [leaf-user] Interest in support for 3G / 4G wireless Internet connectivity?

Hi. 16.06.2013 22:03, david M brooke пишет: On Sun, 2013-06-16 at 15:52 +0200, KP Kirchdoerfer wrote: Hi David; Am 16.06.2013 11:49, schrieb david M brooke: Hi, I am just wondering how much interest there would be in support for 3G (or 4G, where available) wireless Internet network

Re: [leaf-user] still can't get Bering 5 to boot

06.04.2013 06:11, Victor McAllister пишет: I used syslinux 4 on compact flashes on a PC Engines ALIX geode version for serial. It loads up until LINUXRC: Root: /dev/ram0 LINUXRC: Looking for leaf.cfg... LINUXRC: Generating default dirs... LINUXRC: Generating /tmp /var/log partitions ...

Re: [leaf-user] can't boot Bering 5B1

Hi. What syslinux version do you use? BuC 5 requires 4.0 or higher. 3.x doesn't support multiple initrds 02.04.2013 00:26, Victor McAllister пишет: On 4/1/2013 5:41 AM, KP Kirchdoerfer wrote: Am 01.04.2013 07:04, schrieb Victor McAllister: on a PC Engines ALIX I am using syslinux to boot

Re: [leaf-user] BuC 5 on Proliant DL380R02

30.03.2013 15:47, Robert K Coffman Jr. -Info From Data Corp. пишет: P.S. IMHO it'll be much better if LEAF will be booted from IDE DOM (this server seems to have IDE CD-ROM - so it should have IDE connector on mobo). 10+ years old HDDs IMHO may die too suddenly... I have quite a few old PCs in

Re: [leaf-user] BuC 5 on Proliant DL380R02

) dMb On 28 Mar 2013, at 20:51, Pär Johansson wrote: Thanks, but i want to boot from the array. Would that really work? Best regards Pär Johansson 28 mar 2013 kl. 20:51 skrev Andrew ni...@seti.kr.ua: 28.03.2013 19:29, Pär Johansson пишет: Hi I'm running a Proliant DL380R02

Re: [leaf-user] BuC 5 on Proliant DL380R02

28.03.2013 19:29, Pär Johansson пишет: Hi I'm running a Proliant DL380R02 with Bring uClibc 3.1.1, now I want upgrade to 5.0 b1. The cciss driver for the Smart Array 5i is not available in the modules but I have found the hpsa driver that could work with the option hpsa.hpsa_allow_any=1,

Re: [leaf-user] Sun 501-5406 X1034A Quad 4-Port PCI-X Fast Ethernet Driver

It seems like this NIC is already supported by vanilla kernel. Try to enable CONFIG_HAPPYMEAL option and reassemble kernel. It isn't enabled by default in LEAF because NIC is enougn rare, and LEAF will become too fat if all NICs (and other hw like rare ATA controllers) will be enabled here.

Re: [leaf-user] Sun 501-5406 X1034A Quad 4-Port PCI-X Fast Ethernet Driver

24.03.2013 20:55, d пишет: Hello Andrew, Try to enable CONFIG_HAPPYMEAL option and reassemble kernel. you mean, recompile/rebuild ? I have experience with adding .o modules only, I did it with other NIC cards. Yes. It isn't too hard. Just modify kernel config, and run compilation. Plus

Re: [leaf-user] High CPU LEAF hardware recommendations

Hi. You can try i5 (or LGA1155 Xeon - it costs same price), or you can try AMD FX8320/8350 i5 has lesser cache/memory latency, but AMD has twice more cores (although each core is some slower than in i5). W/o encryption, on plain routing i5 should be faster, but for encryption AMD may be better.

Re: [leaf-user] Problem with leaf 4.3.3 installation on Pendrive

11.01.2013 14:06, KERNEL - Mauricio Améndola пишет: -- Mauricio Améndola Communications / Technical Department KERNEL Consultores Zabala 1327/402 , 11000, Montevideo, Uruguay T+(598-2) 915 6563 / (598-2) 915 9336 El 10/01/2013 5:16, Andrew escribió: Hi. Try to add 'usb_wait=5

Re: [leaf-user] Problem with leaf 4.3.3 installation on Pendrive

11.01.2013 16:34, Erich Titl пишет: Hi Mauricio Am 11.01.2013 13:04, schrieb KERNEL - Mauricio Améndola: Hi Erich, thanks for reply! My anwsers between lines! Well boot with grub is an option too, y used syslinux because is that it said in bering uClibc docs but i'll try with grub.

Re: [leaf-user] Problem with leaf 4.3.3 installation on Pendrive

Hi. Try to add 'usb_wait=5' to kernel cmdline to increase delay before device mounting. 09.01.2013 20:34, KERNEL - Mauricio Améndola пишет: Bering-uClibc 4.x Hello!!! I've installed the last version of Bering-uClibc (4.3.3) on a USB drive and

Re: [leaf-user] New version

Hi. You can buy some kind of IDE flash (IDE DOM like Transcend one, or CF + chinese CF-IDE adapter, or SD + SD-IDE adapter - it's less preferred). Or you can try your luck with PLoP boot loader on floppy that will allow you to boot from USB. In any case, IMHO floppy isn't a best choice, it may

Re: [leaf-user] New version

On Fri, Dec 21, 2012 at 6:47 PM, Joep L. Blom jlb...@neuroweave.nl wrote: I would be very grateful as the world has not ended so I can install a new firewall (:. I know it can be difficult, but it might be time to move on. Before I got myself a WRT54GL, I was running LEAF on a 1GHz Pentium III,

Re: [leaf-user] Hardware for LEAF-running WiFi router?

Hi. LEAF should run on any x86 PC. About WiFi - IMHO Atheros is one of best choices for Linux. 06.12.2012 19:30, Eric House пишет: It's time to get a dedicated hackable WiFi router to replace the consumer-grade stuff I keep having to replace (while the Soekris and PCEngines boards running our

Re: [leaf-user] Best place for own shell scripts

One of such places is /root... 25.11.2012 16:53, Markus Koelle пишет: Hi, where in LEAF filesystem is the recommended place to store own perl and shell scripts? The scripts should be saved with standard config backup mechanism. Cheers Markus

Re: [leaf-user] munin-node for Leaf Bering uClibc

Hi. Munin master is SNMP-capable, as I saw in doc - so at least basic monitoring can be enabled. Maybe in future somebody will add agent package for LEAF, or you can try to do this by yourself and send patch to somebody of developers. And as I saw in doc, munin is based on rrdtool - not best

Re: [leaf-user] network card / motherboard problem

Hi. It looks like kernel driver is buggy/incompatible with this chip revision. Try to assemble 5.0 branch from git (master branch of repo), it has newer kernel. 24.10.2012 00:17, Marko пишет: Hello, I just changed a motherboard and can no longer get the 4 port network card to work. Was a

Re: [leaf-user] How do I specify which ARCH I want to build packages against?

Hi. maint branch (4.x) is only for x86 systems, and actually it is compiled for i486 cpu intruction set with optimisations for i686 - which is a bit slower (possible 5-10%) than native i686, but will be enough good executed on all target platforms. Or you can specify arch in

Re: [leaf-user] ./buildtool.pl build buildenv fails...

Hi. You clonned 5.x branch, which have some differences from 4.x If you want to build just toolchain (compiler + etc) - it's renamed from buildenv to toolchain in trunk. But you may just to build desired package - all will be built by dependencies. On 10/10/12 06:30, ads...@genis-x.com wrote:

  1   2   3   >