Date: Thu, 18 Mar 2004 00:11:03 -0800
From: chester prudhomme [EMAIL PROTECTED]
Subject: Re: [LIB] 110CT enhanced port replicator
Hi Richard,
I sent you an email earlier about your 100ct port replicator but I'm not sure you got
it. Yes, the one you have will work - it's the same part number!
Date: Thu, 18 Mar 2004 09:34:30 +
From: T i m [EMAIL PROTECTED]
Subject: Will 4.3G into 50CT go please?
Hi All,
I've not been playing with my little 50CT recently for a couple of
reasons.
1) The new version of my GPS software (Mapsource) was too big to fit on
the std drive ;-(
2) I picked
Date: Thu, 18 Mar 2004 11:12:36 -
From: Fisher, Dave (IBM) [EMAIL PROTECTED]
Subject: RE: [LIB] LIb70 and Wifi
IIRC, the Lib70 will accept Cardbus devices (i.e. 32bit) and it was only the
50CT and below that only accepted 16bit devices.
Anyway my 802.11b Orinocco Gold card is a 16bit card as
Date: Thu, 18 Mar 2004 11:40:49 +
From: "Paul Betts" <[EMAIL PROTECTED]>
Subject: [LIB] CT100 - HDC Error...
Hi,
I've not used my Lib for some time, and I switched it on and it comes up with a HDC error...
Any suggestions ?
Thanks
Paul.Half price modem, FREE connection and one month FREE
Date: Thu, 18 Mar 2004 05:45:53 -0600
From: john [EMAIL PROTECTED]
Subject: RE: [LIB] LIb70 and Wifi
don't forget the cards have to be 5 volts. If you use a 3.3V card in a 70
or below sooner or later it'll fry.
At 05:15 AM 3/18/2004, you wrote:
Date: Thu, 18 Mar 2004 11:12:36 -
From:
Date: Thu, 18 Mar 2004 12:09:26 -
From: Fisher, Dave (IBM) [EMAIL PROTECTED]
Subject: RE: [LIB] Will 4.3G into 50CT go please?
-Original Message-
Date: Thu, 18 Mar 2004 09:34:30 +
From: T i m [EMAIL PROTECTED]
Subject: Will 4.3G into 50CT go please?
So, from my memories of
Date: Thu, 18 Mar 2004 12:12:33 -
From: Fisher, Dave (IBM) [EMAIL PROTECTED]
Subject: RE: [LIB] LIb70 and Wifi
-Original Message-
Date: Thu, 18 Mar 2004 05:45:53 -0600
From: john [EMAIL PROTECTED]
Subject: RE: [LIB] LIb70 and Wifi
don't forget the cards have to be 5 volts. If
Date: Thu, 18 Mar 2004 20:40:21 +0800
From: Raymond [EMAIL PROTECTED]
Subject: Re: [LIB] CT100 - HDC Error...
I've had weird errors, including HDC errors, happen when my expansion
memory board was loose ... might be worth flipping the keyboard and making
sure that's still tightly seated. You may
Date: Thu, 18 Mar 2004 08:21:26 -0800
From: dm [EMAIL PROTECTED]
Subject: LIb70 and Wifi
Thanks Dave.
I was reading the Adorable little libretto site and it said the cardbus was
16bit for the 70 as well.
I just don't know. Anyone else out there know about this?
thanks, all.
Date: Thu, 18 Mar 2004 17:28:30 +0100
From: Miernik [EMAIL PROTECTED]
Subject: Re: [LIB] LIb70 and Wifi
On Thu, Mar 18, 2004 at 08:23:06AM -0800, dm wrote:
I was reading the Adorable little libretto site and it said the cardbus was
16bit for the 70 as well.
Just to clear some confusion:
Date: Thu, 18 Mar 2004 18:52:00 +
From: Matt Hanson [EMAIL PROTECTED]
Subject: Re: [LIB] [OT] Battery cells correction
From: Raymond [EMAIL PROTECTED]
Sorry, I don't mean to be mean about this but shouldn't that be
1500-1600mAh LiIon cells? I don't think the charging circuit in the
libretto
Date: Thu, 18 Mar 2004 19:04:54 +
From: Matt Hanson [EMAIL PROTECTED]
Subject: Re: [LIB] [OT] Battery cells
From: Jim Drouillard [EMAIL PROTECTED]
The 18.3mm cells mentioned in another
post would probably be 4/3FA cells; I assume the F
means fat. http://www.batterystation.com/nicads.htm
is
Date: Thu, 18 Mar 2004 19:07:12 +
From: Matt Hanson [EMAIL PROTECTED]
Subject: Re: [LIB] 110CT enhanced port replicator
From: Trench Shoring [EMAIL PROTECTED]
I too am looking for the enhanced port replicator for a 110.
Keep your eye on EBay. There's none right now, but there have been
Date: Thu, 18 Mar 2004 12:33:27 -0800 (PST)
From: John Musielewicz [EMAIL PROTECTED]
Subject: RE: [LIB] LIb70 and Wifi
Good point, I'd forgotten about that. It's also one
of the original reasons
I bought the Orinocco, they (at the time) were
marked as both 3.3V and 5V
compatible though
Date: Thu, 18 Mar 2004 21:05:05 +
From: T i m [EMAIL PROTECTED]
Subject: Re: [LIB] Will 4.3G into 50CT go please?
Fisher, Dave (IBM) wrote:
I've had a 9.5mm drive fitted in my Lib50 without issues... a 4.3gb will be
fine and you'll be able to use all (except for the hiberntation partition
Date: Fri, 19 Mar 2004 02:30:43 +0300
From: Vitaly Pavlenko [EMAIL PROTECTED]
Subject: 1.8 HDDs
Hello!
I can see that Toshiba and Hitachi/IBM are going different ways in design of 1.8 inch
HDDs. Toshiba way seems a bit strange, they kept PC card format, just modified the
connector, and it
Date: Fri, 19 Mar 2004 09:47:52 +0800
From: Raymond [EMAIL PROTECTED]
Subject: Re: [LIB] [OT] Battery cells correction
At 10:53 AM 18/03/2004 -0800, you wrote:
Date: Thu, 18 Mar 2004 18:52:00 +
From: Matt Hanson [EMAIL PROTECTED]
Subject: Re: [LIB] [OT] Battery cells correction
From: Raymond
Date: Fri, 19 Mar 2004 06:31:07 + (GMT+00:00)
From: Matt Dooner [EMAIL PROTECTED]
Subject: 2.6 linux kernels on a 50ct
Has anyone had any luck with 2.6 linux kernels on the 50ct? I cannot get the PCMCIA
bridge to work. I read a post online saying the bridge in the Libretto does not have
Date: Fri, 19 Mar 2004 08:36:18 +0100 (CET)
From: Wouter Smith [EMAIL PROTECTED]
Subject: Re: [LIB] USB errors on Lib110
A few months back I've installed WindowsME on my Lib110 and now the USB2.0
pccard works flawlessly! So it wasn't the card that was wrong, perhaps it
was the drivers in Win98SE
Date: Fri, 19 Mar 2004 08:46:19 +0100 (CET)
From: Wouter Smith [EMAIL PROTECTED]
Subject: USB powered external HD
Hello all,
(I'm re-re-sending this again today as my previous posts from 3 and 1 days
ago did somehow not appear on the list)
I am looking for an external 2.5 USB harddisk. I want
20 matches
Mail list logo