Re: [Linux-PowerEdge] T630 iDRAC 2.80.80.0

Hi Vincent iDRAC firmware update 2.81.81.81_A00 finally fixed the issue on the T630 for us. Thank you very much for your efforts. Regards Stefan On Jul 8, 2021, at 19:43,

Re: [Linux-PowerEdge] T630 iDRAC 2.80.80.0

80.80 accessing the iDRAC over https by using its IP (and not its FQDN) > works. This is a tip which was shared by Anton Thomas from Dell. > > My 2c, > > Vincent > > On Sun, 16 May 2021, Stefan M. Radman wrote: > >> Hi, >> >> Recently I upgraded a T630

Re: [Linux-PowerEdge] T630 iDRAC 2.80.80.0

, > > I have a T630 with a few months left on Support. I will try to give 2.80 a > try this week. Have you contacted Dell about the issue? > Regards, > > Vincent > > > On Mon, 17 May 2021, Stefan M. Radman wrote: > >> Thanks >> >> The iDRA

Re: [Linux-PowerEdge] T630 iDRAC 2.80.80.0

-Original Message- > From: Linux-PowerEdge On Behalf Of Onno > Zweers > Sent: 17 May 2021 10:14 > To: Stefan M. Radman ; linux-poweredge > > Subject: Re: [Linux-PowerEdge] T630 iDRAC 2.80.80.0 > > Hi Stefan, > > I've not ran into this, but I have a noticed wi

[Linux-PowerEdge] T630 iDRAC 2.80.80.0

Hi, Recently I upgraded a T630 from iDRAC firmware version 2.75.75.75 to 2.80.80.80. After the upgrade the web interface no longer worked. The web client received an empty reponse from port 80/tcp as well as 443/tcp. Over SSH the iDRAC was still reachable (and showed version 2.80.80.80).

Re: [Linux-PowerEdge] Debian 10 Open Manage

[EXTERNAL EMAIL] Hi I haven't seen any answer to the question so here it is again: https://linux.dell.com/repo/community/openmanage/ Are we going to see OMSA and iSM for Debian 10 Buster any time soon? Thanks Stefan > On Oct 7, 2019, at 17:23, Robert Emery wrote: > > > [EXTERNAL EMAIL]

Re: [Linux-PowerEdge] Idrac not accessible

n once a month) I try new ideas to get it solved. So booting from an external Ubuntu was successful So, I was sure that the Dell-gold-support suggestion to replace the motherboard, was not a good idea. Carel -Original Message- From: Stefan M. Radman mailto:s...@kmi.com>> Sent:

Re: [Linux-PowerEdge] Idrac not accessible

o not have this problem. > > Carel > > -Original Message- > From: Stefan M. Radman > Sent: woensdag 18 december 2019 15:15 > To: Werf, C.G. van der (Carel) > Cc: Hamelin, Patrice (SSC/SPC) ; > linux-poweredge@dell.com > Subject: Re: [Linux-PowerEdge] Idrac not

Re: [Linux-PowerEdge] Idrac not accessible

[EXTERNAL EMAIL] Is your iDRAC IP and your "public IP" on the same VLAN? In the iDRAC Network Settings, what is your iDRAC NIC and Failover Network selection? What NIC model do you operate on and what's the firmware version of the shared NIC? I believe to remember reading about a similar

Re: [Linux-PowerEdge] Integrated dual SD card module

card module [EXTERNAL EMAIL] In BIOS/Legacy mode you might want to check if the SDcard is still prioritized over the internal HDD in the HDD Boot Sequence. On Wed, Dec 11, 2019 at 12:01 AM mailto:rajesh.z.pa...@dell.com>> wrote: Michael, Could you help here? -Rajesh From: linux-poweredge-bou

Re: [Linux-PowerEdge] Integrated dual SD card module

From: Linux-PowerEdge mailto:linux-poweredge-boun...@dell.com>> on behalf of Peter Brunnengraeber mailto:pbrun...@bccglobal.com>> Sent: Saturday, November 23, 2019 7:18:48 PM To: Stefan M. Radman mailto:s...@kmi.com>> Cc: linux-poweredge@dell.com<mailto:linux-poweredge@dell.com&

Re: [Linux-PowerEdge] Integrated dual SD card module

-- Original Message - > Date: Sat, 23 Nov 2019 17:55:48 + > From: "Stefan M. Radman" > To: "" > Subject: [Linux-PowerEdge] Integrated dual SD card module > Message-ID: <899ea8e7-efb4-4eb4-a3af-e2dc4e084...@kmi.com> > Content-Type: text/plain; cha

[Linux-PowerEdge] Integrated dual SD card module

[EXTERNAL EMAIL] Recently I updated the firmware on an R630 through the life cycle controller, including the firmware of the IDSDM. Since the update, the SD cards no longer show up as a boot option and the host no longer boots the ESXi installed on them. The server firmware is fully up to

Re: [Linux-PowerEdge] rhel8 openamange repo

[EXTERNAL EMAIL] megaraid_sas is still there but certain adapters were removed from the driver e.g. PERC5 ... Red Hat Enterprise Linux8 > Considerations in adopting RHEL 8 > Chapter 11. Hardware enablement > 11.1. Removed hardware support

Re: [Linux-PowerEdge] rhel8 openamange repo

[EXTERNAL EMAIL] poor decision by RH > On Nov 15, 2019, at 15:26, Daryl Herzmann wrote: > > > [EXTERNAL EMAIL] > > Howdy, > > I think the Red Hat + Dell partnership is very puzzling. A couple of > points in this area. Red Hat removed kernel module support for many > SAS controllers

Re: [Linux-PowerEdge] Broken links on linux.dell.com

Oct 18, 2019, at 14:53, john.h...@dell.com<mailto:john.h...@dell.com> wrote: Dell Customer Communication - Confidential I fixed the links yesterday by replacing the Red Hat one with a new URL. The SUSE one works for me. From: linux-poweredge-bounces-Lists On Behalf Of Stefan M. Radman Sent: Frid

Re: [Linux-PowerEdge] Broken links on linux.dell.com

[EXTERNAL EMAIL] Links are still broken. Does anyone feel responsible for these websites? Does anyone from Dell care to respond and escalate even if not responsible? Thanks On Oct 12, 2019, at 08:02, Stefan M. Radman mailto:s...@kmi.com>> wrote: On http://linux.dell.com<http

[Linux-PowerEdge] Broken links on linux.dell.com

[EXTERNAL EMAIL] On http://linux.dell.com the link "Dell and Red Hat" is broken, same as the "Linux" link on the "Dell and

Re: [Linux-PowerEdge] Linux Dell site

I can reach it right now. Both http://linux.dell.com and https://linux.dell.com. Tried from US and Europe Stefan On Aug 28, 2018, at 12:40 PM, Jean-Daniel TISSOT mailto:jean-daniel.tis...@univ-fcomte.fr>> wrote: Hi list, hi @dell.com Is

Re: [Linux-PowerEdge] Apparently Dell OMSA 9.1.0 for Debian has been released

u tune the webserver config file? Thx El 09/07/18 a las 19:51, Stefan M. Radman escribió: Yes, the unofficial build I tested (on Proxmox 5.2) was provided by the Dell Infrastructure Service Group. It did have a few hiccups during installation (e.g. dirmngr) and some limitations (e.g. iSM not w

Re: [Linux-PowerEdge] off topic - PowerEdge & Solarflare SFC9000

hi lejeczek You wrote "one box gets shoot in the head". Are you running the Pacemaker cluster framework with Corosync and STONITH? Stefan > On Jul 11, 2018, at 6:03 PM, lejeczek wrote: > > hi guys > > I wonder if any of you might be using SFC9000(same firmware everywhere, > Centos 7.5 too)

Re: [Linux-PowerEdge] Apparently Dell OMSA 9.1.0 for Debian has been released

Yes, the unofficial build I tested (on Proxmox 5.2) was provided by the Dell Infrastructure Service Group. It did have a few hiccups during installation (e.g. dirmngr) and some limitations (e.g. iSM not working with PVE kernel) but basic OMSA functionality was available and stable (web and

Re: [Linux-PowerEdge] Installing OpenManage on ESXi

Hi Mauricio, Here is your starting point Dell EMC OpenManage Server Administrator 9.1.0

Re: [Linux-PowerEdge] Alternative to ftp.dell.com in Lifecycle Controller for R710?

11G server updates are no longer included in the LifeCycle controller update catalog. See email from sash...@dell.com below and in the archive http://lists.us.dell.com/pipermail/linux-poweredge/2018-April/051679.html We do not provide support for servers below 12th

Re: [Linux-PowerEdge] omconfig command disabled?

Refer to the documentation for more information. Dell EMC Server Administrator Storage Management 9.0.1 User’s Guide Battery Tasks Supported On PERC Hardware

Re: [Linux-PowerEdge] microcode_ctl and Spectre/Meltdown

BIOS updates for 11G-14G servers are available again. http://www.dell.com/support/article/us/en/19/sln308588/microprocessor-side-channel-vulnerabilities-cve-2017-5715-cve-2017-5753-cve-2017-5754-impact-on-dell-emc-products-dell-enterprise-servers-storage-and-networking-?lang=en > On Jan 12,

Re: [Linux-PowerEdge] OpenManage for Debian 9 Release plan

+1 for Proxmox v5 on Dell PowerEdge On Apr 4, 2018, at 9:39 AM, Eneko Lacunza > wrote: Same here too, using Proxmox v5 on Dell servers... El 30/03/18 a las 13:08, Thomas Sillard escribió: Hi, Same thing for us, especially for customers Proxmox V5

Re: [Linux-PowerEdge] dsu woes

Dell FTP site is not updated either. The Lifecycle Controller of an R620 did not "see" BIOS update 2.6.1 today. Stefan > On Mar 12, 2018, at 5:57 PM, Gregory Matthews > wrote: > > seems like the firmware is available as a point and click download from the > dell

Re: [Linux-PowerEdge] more downgrades: @Dell -why?

the downgrade to the > recommendation of the DSU, then I would greatly appreciate it. > -- >Zachary Wincek > > > On Sun, Feb 18, 2018 at 12:49 PM, Chris Adams <li...@cmadams.net> wrote: >> Once upon a time, Stefan M. Radman <s...@kmi.

Re: [Linux-PowerEdge] more downgrades: @Dell -why?

way from Dell. >> >> many thanks, L. >> >> >> >> On 16/02/18 14:02, Patrick Boutilier wrote: >>> >>> I always use -u to avoid seeing downgrades. >>> >>> u, --apply-upgrades-only List only upgradable

Re: [Linux-PowerEdge] more downgrades: @Dell -why?

Kidding, are you? DSU contradicts the official Dell Support resource (not the first time). http://www.dell.com/support/home/us/en/19/drivers/driversdetails?driverId=80XJ1 Dell Lifecycle Controller v1.7.5 Version 1.7.5.4, A00 Release date 25 Jun 2015 Last Updated 09 Mar 2016 Importance:

Re: [Linux-PowerEdge] A pointer please...

As to the intended purpose: http://en.community.dell.com/techcenter/systems-management/w/wiki/dell-vflash-feature-on-idrac "vFlash provides a custom deployment environment that allows for the automation of server configuration, scripts, and imaging. Multiple boot media disks are no longer

Re: [Linux-PowerEdge] Mellanox ConnectX-4 Ethernet in DSU

David, For what it's worth: Firmware updates for the sake of updating firmware might not be a good idea but ... I've been more successful with frequent (e.g. quarterly) incremental updates than "Jumbo Patches" every couple of years. Keeps you practicing your updates, change management and

Re: [Linux-PowerEdge] Deploying OMSA using VUM

@C:\ProgramData\VMware\VMware Update Manager\Logs if you use a windows based VUM) or vc-support command output from VCSA ? Thanks, Krishnaprasad -Original Message- From: linux-poweredge-bounces-Lists On Behalf Of Stefan M. Radman Sent: Thursday, October 26, 2017 10:41 PM To: linux-

Re: [Linux-PowerEdge] Deploying OMSA using VUM

re-vum-server-log4cpp.log located @C:\ProgramData\VMware\VMware Update Manager\Logs if you use a windows based VUM) or vc-support command output from VCSA ? Thanks, Krishnaprasad -Original Message- From: linux-poweredge-bounces-Lists On Behalf Of Stefan M. Radman Sent: Thursday, October 26

Re: [Linux-PowerEdge] Enumerate total disk bays

w/ a H710 Mini. sudo omreport storage controller controller=0 info=pdslotreport Details of Enclosure BP12G_EXPon Controller PERC H710 Mini On Tue, Jan 24, 2017 at 4:00 PM, Stefan M. Radman <s...@kmi.com<mailto:s...@kmi.com>> wrote: I'm guessing the 'pdslotreport" op

Re: [Linux-PowerEdge] Enumerate total disk bays

I'm guessing the 'pdslotreport" option was something added to those newer generation cards. Nope, according to this community forum post by Peter Wise the pdslotreport command works on H710mini as well. http://en.community.dell.com/techcenter/systems-management/f/4494/t/19471290 The only

Re: [Linux-PowerEdge] iDracs as fencing device in ha cluster

t;dedicated" for redundancy, would one? Yes, I would. What do you gain with "Dedicated"? Use one of the "Shared with Failover" modes and redundant network paths the same way you do with other cluster interfaces. Stefan > On Jan 17, 2017, at 6:32 PM, lejeczek <pe

Re: [Linux-PowerEdge] SLI 2.2 stops iDRAC on R710

re's a bug in the BNX Linux > driver, which brings down the iDRAC interface if either of the main ethernet > interfaces are shut down. > > I'd be grateful for any input. > > See > http://lists.us.dell.com/pipermail/linux-poweredge/2016-October/050784.html > > -- &

[Linux-PowerEdge] SLI 2.2 stops iDRAC on R710

the machine. The server is at the latest firmware level available from Dell FTP through Lifecycle Manager. Has anyone made the same or similar experience? Is booting SLI from virtual media supported? Stefan Stefan M. Radman Senior ICT Engineer Open Systems & Serv

Re: [Linux-PowerEdge] Automatic Updates Broken With Repo Change

+1 for your suggestion Stefan > On May 6, 2016, at 4:40 PM, lejeczek wrote: > > in my mind, Dell's repo should itself be an rpm package - > like every other civilized group of developers do - and not > some script that mangles it all in. > > Put it into a rpm, this way

Re: [Linux-PowerEdge] iDRAC 7 Enterprise partially not working after upgrade to v. 2.21.21.21

Hi Gregorz > Upgrade via web interface went fine. After upgrade most features work but I > cannot get HW inventory and I remember having similar issues on an R620 after upgrading from iDRAC 1.x to iDRAC with LC 2.10.10. Here is the solution Dell Pro Support kindly provided at that point: