It seems to be very difficult to use any kind of formatation (like a
heading or a item-list) inside a Abstract (KOMA-report).
Yes because an abtract is gemerally not designed to have items and
headings. It normally only contains plain text. The text layout is
defined by the document class
I want my introduction in my thesis to be not numbered. I
am also using semi-fancy headings so that the chapter name
is printed on the top left of all pages within the chapter.
My introduction covers a couple of pages but the heading
above the second page is inherited from the previous chapter
Jon Bendtsen wrote:
Hi
I want to make an enumerated list, interrupt it by some text and
continue the enumerated list with the approprate number
1 one
2 two
interrupt text
3 three
4 four
There's a LaTeX package that does this, but I can't remember
what it is called. Anyone?
You can
On Thu, 2008-10-30 at 18:57 +0100, Abdelrazak Younes wrote:
Your reply suggests that I have been unable to explain properly.
When you start a new document, type Hi there, and start display
math,
LyX can accomodate the new stuff you write on the screen.
Try to type some more text until
C++ Compiler: g++ (3.3.4)
You've a fairly old version of g++. Maybe upgrading gcc might solve the
problem ?
Vincent
Op 21-2-2011 18:26, Uzair Baig schreef:
I still need help with the table, please (any1) help me.
What do you want to align ?
Vincent
Op 14-3-2011 19:15, Lars Olesen schreef:
I have written a document in Lyx, but when I export it it seems as if
it does not know how long the pages are, and some of the content
stretches all the way to the bottom. I have checked the margins, and
they seem to be allright.
See the exported file
Op 22-3-2011 17:59, Steve Litt schreef:
The next major revision of my courseware will be All-Beamer-All-The-Time (no
LyX, just Beamer LaTeX). It's 1000 times easier to maintain and personalize
than OOImpress viewed on MS Powerpoint.
You would have loved the new LyX Presentation Mode:
On 23-3-2011 23:16, Greg Kise wrote:
Hi LyXers,
There was some discussion of making it possible to change cursor size
in LyX2.0RC1 (especially needed for Mac). Was this done? And if so,
how do I do it?
I have 300+ pages to edit and the one pixel cursor is making me
bug-eyed ;-).
Thanks!
On 24-3-2011 10:20, Ben Lincoln wrote:
Hi,
I work in the IT arena at Deutsche Bank, a user has come to me
requesting LYX on his work PC
Please could you give me some information on the following:
Lyx being free, is this something that can also be installed within a
Corporate environment
On 1-4-2011 23:03, Murat Yildizoglu wrote:
I have been able to reproduce this problem: I have tried to resize
Lyx's screen using Divvy and Lyx crashed.
I give below the beginning of the crash report. It seems that
com.apple.HIToolbox get very excited ;-)
It seems that the problem might have
On 31-3-2011 10:07, Pavel Sanda wrote:
Dear Pavel,
I've translated the Dutch list. I'm not sure if they are all correct since I'm
no mathematician, and the math that I do do is usually in English, but I hope
it helps.
I believe Vincent have seen some Dutch math text and can check it?
I'm
On 5-4-2011 22:22, Ingar Pareliussen wrote:
Hi
I got a crash when trying to Save As. Save seems to work fine...
I have made a small sample file that crashes every time for me with save as.
The error is many::
lassert.cpp(21): ASSERTION contains(fmt, from_ascii(%1$s)) VIOLATED IN
Hey LyX developers!
As in MS (boo!) Office, when saving a new file, whatever appears in the
\title section should automatically be guessed as the name that the file
should be saved as.
In principle, I could live with proposing the title as the file name.
That sort of makes sense if you are
On 18-1-2011 11:17, Christian Wilhelmsen wrote:
I juse LyX and Dropbox in collaboration with my team mates, and the problem
is that when you have opened a file, another user edits it and sync it through
dropbox, LyX wont open the new version, it opens a buffered copy or something.
We have
On 19-4-2011 21:30, gordon cooper wrote:
What is the correct way to pronounce 'Lyx' in
a country speaking English?
Liks.
Vincent
We dont pronounce it as the final X in latex or tex.
On 22-4-2011 11:27, Stefan Janse van Rensburg wrote:
Dear List,
I'm using Fedora 14 (32 bit version), LyX 2.0.0-0.11.beta3.fc14. Upgrading to
LyX 2.0.0-0.21.rc3.fc14, I encountered several problems which forced me to
downgrade back to LyX 2.0.0-0.11.beta3.fc14.
Which problems did you
Please, can't you encapsulate all of the hassle into lyx modules, and
allow lyx modules that are in the same directory as the lyx file? Or
better yet: inside the lyx file?
Yes, we have been working on this. Hopefully, this will be
implemented in LyX 2.1.
Vincent
2) pop up vs sidebar: I think this was probably the solution to the issue
that the old pop up wasn't smart enough not to hide the hi-lighted word and
it's immediate context when it opened. And I'll admit that as much as I
totally loath all sidebars «I like my entire window width to always
On 5-6-2011 16:23, Joe(theWordy)Philbrook wrote:
It would appear that on Jun 5, Vincent van Ravesteijn did say:
2) pop up vs sidebar: I think this was probably the solution to the
issue
that the old pop up wasn't smart enough not to hide the hi-lighted word
On 11-6-2011 12:47, Jürgen Spitzmüller wrote:
Alain DIDIERJEAN wrote:
- I'd like to get a busy pointer (like in previous versions) while
compiling, as a feedback;
I don't know if that's possible. Note, though, that there's a spinning icon
in
the taskbar (bottom right) indicating
Op 11-9-2011 22:06, Richard Heck schreef:
On 09/11/2011 03:38 PM, alexandre.depou...@ulg.ac.be wrote:
Hi all,
I have tried to install LyX 2.0.0 2.0.1 several times on my Ubuntu-run laptop
... without success. After apparently successfully compiling, LyX spits out the
following error when
Op 20-9-2011 18:53, Manveru schreef:
I need to configure batik as SVG converter for LyX 2.0.0 as I have in
1.6.x - I know how, but I have some issue in the method.
And I CANNOT debug that, because there is no enabler for console
output of LyX in windows - it even does not accept command line
Are the dummy tags supposed to come over from the lyx doc? Is this a
docbook toolchain misconfig on Fedora's part? TIA Phil
This is: http://www.lyx.org/trac/ticket/7004.
I already proposed a patch to fix this last year, but no-one has been
around to verify the validity of the fix and to
Op 9-11-2011 2:22, Xu Wang schreef:
I'm considering using LyX's built-in version control support. Are
there any drawbacks to using it? Do most people use it? What is the
most popular alternative?
There is no built-in version control in LyX. We just offer easy
interaction with the version
Op 9-11-2011 13:51, Stephan Witt schreef:
Am 09.11.2011 um 11:52 schrieb Vincent van Ravesteijn:
Op 9-11-2011 2:22, Xu Wang schreef:
I'm considering using LyX's built-in version control support. Are there any
drawbacks to using it? Do most people use it? What is the most popular
alternative
Op 29-11-2011 22:23, Richard Heck schreef:
On 11/29/2011 04:17 PM, Stephan Witt wrote:
Am 29.11.2011 um 22:07 schrieb Richard Heck:
My book, /Frege's Theorem/, which was both written with and typeset from
LyX, has just recently been published by Oxford University Press. You
can have a look at
So.. how can we prepare a collaborative document in LyX in windows system.
Please.. Do you have any suggestion, the system that we have to use.
What is the software svn client and the server, that perfectly match
with LyX.
As Stephan said, LyX can't handle yet Subversion 1.7. Your only option
Op 2-3-2012 18:04, Graham Smith schreef:
I have just updated Lyx by adding the new the Ubuntu ppa to Ubuntu
11.10 and I am getting the following warning:
(lyx:2997): Gtk-WARNING **: Unable to locate theme engine in
module_path: pixmap,
Is this something to be worried about, and if so can
Op 9-3-2012 18:02, Barger, Carla schreef:
Hi Lyx Users!
I hope I'm not committing a major faux pas by posting this to the
board, but I'm desperate. I have a 40 page word doc with many formulas
that I need to put into Lyx for a professor. I am actually not
familiar enough with Lyx at this
Op 24-3-2012 11:02, Nicholas Martin schreef:
Dear Lyx Community
I'm currently using Lyx version 2.02 and am trying to create a text
document (mainly in English) that also contains a few Chinese
characters. However, having written my text, whenever I clicked on pdf
viewer, the program said it
Dear LyX users and developers,
LyX has a problem with Windows users that have their home directory on a UNC
path. http://wiki.lyx.org/LyX/Troubleshooting mentions these problems for Lyx
1.5 already. (Recent versions do start, but have no classes available.)
I have been struggling with this
the following command [replacing the characters below with
whatever Chinese you want to write].
\begin{CJK}{UTF8}{}\begin{SChinese}整治\end{SChinese}\end{CJK}
Nicholas
On Mar 24, 2012, at 7:23 PM, Vincent van Ravesteijn wrote:
Op 24-3-2012 11:02, Nicholas Martin schreef:
Dear Lyx Community
I'm currently
Op 26-3-2012 12:26, Kunal Saha schreef:
Hi ,
I just installed Lyx 2.0.3 on Windows 7 x64 (the installation file
included MiKtex, Jabref et al). When I try to run the appplication, I get
a window for Proxy Authentication. I fill in the username and password,
then nothing happens .. I see that
Op 4-5-2012 13:42, Mike Bonhoff schreef:
Hi, Lyx-Users,
is there a possibility to stop Lyx when it is compiling. Today I had
several times the problem that I wanted to make a picture with tikz
and made some mistake in the Lyx-Code (forgot the semicolon in the end
of a command). Unfortunately
Op 3-5-2012 16:05, Liviu Andronic schreef:
I would like to have a sound notification when the
compilation finishes. Can LyX do that? Would others find such a
feature useful so as to file an enhancement request?
I think I can easily make a time counter, which you can press and which
shows the
Op 7-5-2012 15:29, Klaus-Dieter Bauer schreef:
Hello!
I stumbled into problems previewing PDF graphics inside LyX. It would
give me the error Unable to Convert to Loadable Format.
You didn't mention which version of LyX you have installed. There was a
bug in the version of ImageMagick that
Ah sorry, that LyX Version number was lost during editing the email.
LyX was installed using the installer LyX-2.0.3-1-Installer.exe,
which should be the latest one.
There is a newer installer which fixes a security issue in the same
ImageMagick library.
Anyway, the problem did not seem
On Saturday, May 19, 2012, Braam Daniels wrote:
Hi Guys
I'm am struggling to get LyX and Python Running. Im a little new to LyX or
at
least i haven't used it in over 4 years.
So I started the process with the LyX 2.0.3 bundle. LyX installed but none
of
the document classes could be
Op 2-6-2012 13:55, Junqing Liu schreef:
Hi everybody!
i have got a error:!pdfTeX error: pdflatex (file ecrm1728): Font
ecrm1728 at 600 not found!
How can I fix it?
Yours
Liu Junqing
Can you post a small file that shows the problem ?
Do you have the LaTeX package ec installed ?
Vincent
Op 27-6-2012 14:26, Rainer M Krug schreef:
Hi
I am working on a beamer presentation and having trouble with seeing the depth
of the environments
clearly. Is there a way of colouring these brackets on the left hand side in
different colours,
so that it is easier to see in which level I am?
Op 28-6-2012 11:01, Rainer M Krug schreef:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 28/06/12 10:59, Vincent van Ravesteijn wrote:
Op 27-6-2012 14:26, Rainer M Krug schreef:
Hi
I am working on a beamer presentation and having trouble with seeing the depth
of the
environments clearly
Op 30-6-2012 14:58, Sergio Celani schreef:
Dear developers
I install the latest version of LyX 2.0.4 in Windows seven, but
the $\ldots$, or $\cdots$ do not appear on the screen.
Sergio
Try to zoom in or out.
Vincent
Falk Sticken wrote:
Hi
I have found a bug in LyX 1.6.4 on Linux (openSUSE 11.1) which is not
reported in the bug tracker. When I start editing an inline math
formula (ALT+M M) and type \mathc
SPACE
BACKSPACE
al
SPACE
LyX crashes.
A backtrace follows below.
bye,
Falk
But both
I tried \footnotemark and \footnotetext, that doesn't work.
Is there a LyX or LaTeX solution to that problem? I'm pretty
sure my old friend will be sorry not to be able to switch to
LyX, which doesn't let you have footnotes in footnotes...
Is this what you mean ?
Vincent
footnotes.lyx
In a long document, is there any way to select a whole part, chapter
or section without having to drag the cursor through it?
Not yet. But please open an enhancement request at
http://www.lyx.org/trac/wiki/BugTrackerHome
so that such a feature can be implemented.
No need for an
Daniele_P schreef:
Hi everyone!
I'm using the last version of Lyx for Mac (OS: Snow Leopard).. I have a
graph in jpeg format (but I also tried with a gif format and many many
others) and I want to insert it into Lyx..
I go in Insert--Graphics and browse the file. Then, Lyx displays the
graph
I am trying to define shortcuts in lyx, and the only
command i know is math-insert What are the other
possibilities? How can i for example combine two commands,
like math-insert \{\] and then go backward one character,
?
Thank you very much
Have a look at the Help-LyX Functions document
Is the problem on screen only, or for the output.
It is about the screen display.
I don't know whether it's a bug. If you select a left alignment of a
paragraph in LyX, LyX and LaTeX both don't indent the paragraph and thus
ParIndent should also be ignored when it is defined in a
phillip burns schreef:
Can anyone help me install a latex package? I installed the package via
MikTex and it's there but Lyx doens't see it after reconfiguring.
thanks
Did you refresh the file name database. MikTeX options - General -
Refresh FNDB ?
Vincent
Ian S. Worthington schreef:
Could http://wiki.lyx.org/FAQ/PDF#toc5 be out of date?
I like the idea of replacing the bitmap fonts (even though they seem quite
good to me) with T1 vector fonts, but am not sure where to specify latin
modern. On my lyx, 1.6.2, there is no Layout→Document menu
For example, the document source initially contains
$\Delta$x which displays as upper case delta followed
by x. If I select the displayed delta and x and click
on Lyx'x Insert index entry button, the document source
changes to \index{\Deltax}$\Delta$x but when I try to
generate an index I get an
I wonder if the file format used in trunk (or rather
the lyx2lyx converter that deals with it) is still
unable to revert back to previous versions' file formats.
What do you mean by unable to revert back ? LyX trunk uses a new file
format (of course) and the older LyXes don't know about the new
I wonder if the file format used in trunk (or rather the lyx2lyx
converter that deals with it) is still unable to revert back to
previous versions' file formats.
What do you mean by unable to revert back ? LyX trunk uses a new file
format (of course) and the older LyXes don't know about
I wonder if the file format used in trunk (or rather the lyx2lyx
converter that deals with it) is still unable to revert back to
previous versions' file formats.
What do you mean by unable to revert back ? LyX trunk uses a new file
format (of course) and the older LyXes don't know about
Hello:
I have been using lyx to creation documentation.
Now, I would like to include a section which is
generated programatically. I see that latex has
the /input{file} construct, but I do not find an
equivalent in lyx.
Try Insert-File-Child document... And select Input as the Include
Type.
Yihui Xie schreef:
Hi,
When we insert a graph into a Lyx document, say, test.pdf, and compile
the lyx document using pdfLaTeX, Lyx will first copy the graph to a
temporary directory and change the file name by adding a path prefix
before the original file name, e.g. 0E_user_document_test.pdf
rgheck schreef:
On 12/08/2009 02:26 PM, Ken wrote:
Still no luck :(
I created the folder:
C:\pipes
and added Full Permissions to this folder to myself (a limited
Windows XP user).
In the preferences I set the LyXServer pipe to:
C:\pipes\lyxpipe
Again, when I restarted LyX I had no luck:
Martin Sladeczek schreef:
I hope your are able to help me, i attached the document,
Did you ?
Vincent
I've just discovered this problem myself after an update from LyX 1.6.4 to
1.6.5
But what I can't fathom is this. The .layout files are quite clearly part of
the default installation and quite clearly belong to the great swathe of
unavailable classes seen on the documents settings.
A lot
[...]
Thanks for a fantastic tool! I use it to generate my book's output
(see
here: http://www.erlangforskeptics.com/book/).
[...]
Little off topic, but your URL does not work with www. prefix...
It works with the www prefix, but it is the skeptics that should read
sceptics. (ok enough
Uwe Stöhr schreef:
Murat Yildizoglu schrieb:
I can see two console windows opening each time I launch Lyx using
the bat file that has been installed by the alternative installer.
They disappear very quickly (I do not have time to read their contents).
This is how it should be.
LyX is
Uwe Stöhr schreef:
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
Ok, I see some extra movement in the task
Liviu Andronic schreef:
Dear all
Out of these four, only \today seems to be working here in ERT (LyX
1.6.5, Debian testing, amd64). I get errors for any of \day, \month or
\year, commands that I found mentioned in this document [1].
Should I expect these commands to work with LyX?
Second, when I use any sort of font formatting inside
a table, say underlining or italics, and then move the
cursor to another cell in the table, LyX assumes that
the formatting for the text in next cell will be the
same as the last formatting I used.
I think this is fixed in
camus.phili...@free.fr schreef:
Hi,
with the 1.6.5, I observe that the math-insert doesn't work as sooner : as an
example, when I insert a fraction, the cursor doesn't blink in the upper part
but after the fraction.
Is it a new feature ?
Phil
No, it was a bug.
See:
Joachim Osnabryg schreef:
I regard it necessary that the LyX user must be enlightened about the
possible functions of the .lyx~ backup files and how to handle with it
in the Tools Preferences Look Feel User interface pane!
(This to developers and documentalists)
Am 20.12.2009, 06:07 Uhr,
I think this is fixed in http://www.lyx.org/trac/changeset/32570.
Sorry, but I am not a developer, so I cannot really decipher the
content of that page. Do you mean that the bug is fixed in 1.6.5?
I mean that it is fixed yes, but I'm afraid that my time-travelling
capabilities are
Hello,
I have tried to add a key-binding to the compiling-function
(hope this is the right word...I mean to complile my text to
a pdf). I have added the key-command in the preferences
(buffer-viev pdf XeLateX). When I enter the keybinding
I get an error-message, in german:
You should have
I have tried to add a key-binding to the compiling-function (hope
this is the right word...I mean to complile my text to a pdf). I
have
added the key-command in the preferences (buffer-viev pdf
XeLateX).
When I enter the keybinding I get an error-message, in german:
You should have
Sebastian Rockel sebastianroc...@... writes:
I had this once with the same configuration. Since I figured out that
Lyx version 1.6.5 is not recommended for OSX 10.6 (right at the
download page).
I am not sure whether that's the correct info. There were problems with
LyX 1.6.4(.0) and OSX
iustifico schreef:
Hello,
I have a question about the theoreme environment Definition and the environment
Enumeration in Lyx.
How can I produce something like this (Latex) in Lyx?
\begin{Definition} Text and formula
\begin{enumerate}
\item Some text and formula
I'm a new comer to Lyx, and reading some of the tute and skim reading
topics of interest the rest.
I'm still left with a question. (hope I didn't miss it)
If creating a book with a couple hundred pages, do I put it all in one
big lyx file, or do I split it across multiple files (say one
I suggested many months ago that spell checking should
be available not in dialog window, but in floating pane
on probably right side. But there was no response about
that.
The spellchecking is already in a floating pane.
http://www.lyx.org/trac/changeset/29322
(for 9 months now)
I do not
The spellchecking is already in a floating pane.
http://www.lyx.org/trac/changeset/29322
(for 9 months now)
I do not have time to try modifying code myself.
We don't have time either.
This is in trunk as I understand... any plan to merge
into 1.6.x line?
No.
Vincent
Hello to all,
5. I still get errors when compiling:
A few of them are like 'Missing } or \cr' inserted.
The others go like 'Package error: No shape named base
is known'. Sometimes, it says 'M' instead of 'shape'.
What can i do to solve these problems?
Can you send us your file, then we can
Hello to all,
5. I still get errors when compiling:
A few of them are like 'Missing } or \cr' inserted.
The others go like 'Package error: No shape named base is known'.
Sometimes, it says 'M' instead of 'shape'.
What can i do to solve these problems?
Can you send us your file, then we can
Christoph Pospiech schreef:
Hi,
as of version 1.6.4, LyX has a pull down menu File - Version control, which
apparently supports CVS and SVN. Any plans to support git as well ?
Thanks !
Christoph Pospiech
Not really I think, but you can define your own commands by using the
vc-command
Joe(theWordy)Philbrook schreef:
Am I expected to do anything to mark this as
resolved??? (I'm still not used to wiki methods) Or do the developers
expect to do that themselves?
We will take care of it. It will remain fixedintrunk until the next
release with the fix is released.
Vincent
This way, you can convert an equation to the source text
(which might be desirable for copying as well).
The other way round is already implemented: Mark a valid
math expression (like \sin(x)) and press Ctrl-M.
If you select the math contents and paste it in text, you'll see the
LaTeX code.
I
[examples/splash.lyx] is the document which automatically opens when
user
runs LyX first time after installation. The problem is that the View -
OpenDocument command produces empty output for me. Please help!
Don't use OpenDocument. Use dvi or pdf to preview.
Vincent
Yes, dvi and pdf work fine for me. But I want OpenDocument because
I'm sending the file to another person and want him to be able to
edit the file.
I k now, but don't send your answer SEVEN times ?!?
Vincent
The 1st email you could have received came to you only,while I wanted
it come
Will I have to start using Linux to have this View - OpenDocument command
work? Then, why don't LyX developers throw this command away from LyX Windows
installation...
We can't help that the third-party utilities are not correctly installed
on your system. Please turn to the websites of
If not then I guess I'll have to figure out how to get my RH BZ
account
working again so I can bug Rex into updating those of us on epel. :|
I don't know any of the words you're using here :S.. Epel ? Rex ? RH BZ
?
### back trace
#0 0x07afcf23 in ?? () from /usr/lib/qt4/lib/libQtGui.so.4
#1
Is there a way to switch between two open lyx files, without using the
mouse?
Thx
John
Ctrl + Tab, Ctrl + PgUp, Ctrl + Shift + F6.. Pick your choice.
If this does not work, type in the command buffer
(View-Toolbars-Command Buffer) buffer-previous and see what appears
in the statusbar
Hi everybody, anyone knows the LFUN name of the insert comment
function accessed via Insert - Note - Comment.
Open Help-LyX Functions and search for Comment.
Vincent
The problem arouse when I needed to insert some obsolete Russian
characters that were used before the 20th century. Namely, the letters
yat (http://en.wikipedia.org/wiki/Yat), fita
(http://en.wikipedia.org/wiki/Fita) or izhitsa
(http://en.wikipedia.org/wiki/Izhitsa): if I insert them to LyX via
When is Lyx 2 coming out?
EK
We don't know yet.
Vincent
I see the Insert-Custom insets in LyX but the submenu is always
empty?
Why is this so? What are custom insets and how are they meant to be
used
(if they can be created)?
From the User Guide sec. A.4.8: Custom Insets: The section Flex insets
and InsetLayout of the Customization manual explains
Am I missing something
I guess you should use \underline instead of \underbar (which is used
when pressing Ctrl+U).
Vincent
How does the british language enter my document - the default is
probably just English on my system. Even my \documentclass
command (on latex export) shows the british option!
Document-Settings-Language is set to English (UK) ?
Vincent
B. Bogart schreef:
Hello all,
I've posted the following bug against ubuntu, in LyX 1.6.4.
https://bugs.launchpad.net/ubuntu/+source/lyx/+bug/515804
The bug report includes screenshots that illustrate the problem.
Anyone have any ideas what could be going on here?
Thanks,
B. Bogart
There is
Hi All,
I think it's really a Lyx bug in fact.
It says that article, book,... are not available but in the
LaTeXConfig.lyx these layouts are well recognized!
See attached file...,
In what directory path did you install LyX ?
Vincent
Now I cannot open that document in 1.6.5 - I just get an error message
about lyx2lyx failure: the lyx2lyx script failed to convert it
The option to export to lyx-1.6.5 does nothing that I can discern (is
it supposed to work?)
Yes, it works.
There should be a .lyx16 file next to the original
/opt/local/bin/msgmerge: `ar.po': No such file or directory
someone (Manveru) said :
Someone puts language file in makefiles but miss committing
the file on repository?
That's not true.
Does ar.po exist on your system ? Does msgmerge exist ? What happens if
you run the command manually ?
Steve Litt schreef:
Is there currently something like this in LyX? I could write one at the native
language level, but the problem with that is the native LyX language keeps
changing. It would probably be better to write it at the LyXFun level, but I
haven't a clue how to do it.
This
Stefano Franchi schreef:
A colleague sent me a latex file that (on my system)compiles perfectly to pdf.
Importing into lyx mangles it up in such a way that it doesn't compile any to
pdf anymore (from lyx). Here is what I see:
1. In the preamble, tex2lyx gobbles up whitespace in (what seems to
I have been experiencing a lot of crashes in the last couple of weeks.
Did you upgrade qt to 4.6 ?
Vincent
But it should have been fixed in branch 2 days ago, if I read
the log correctly. And I downloaded the source yesterday
night (3/11).
No, it has only been fixed in trunk, not yet in branch.
With a text editor, you can change the source yourself (but only if it
is trivial to backport the
1 - 100 of 1153 matches
Mail list logo