Re: Lyx error
Erratum: my lyx is on opensuse tumbleweed, not leap 15. Paolo M Pumilia, t. +39 347 231 54 96 Il gio 11 apr 2024, 09:21 Paolo M ha scritto: > Your lyx file raises the same error. > The option 'Use non-TeX fonts' cannot be selected, although the required > fontspec package is installed. > As i try to view the pdf rendering i get: > > "The external program > > xelatex > > finished with an error. It is recommended you fix the cause of the > external program's error (check the logs). " > > > What is xelatex? > I suspect my texlive installation cannot accept spaces in file names and > directories any more. > > thank you > p. > > > Il giorno gio 11 apr 2024 alle ore 00:41 Steve Litt < > sl...@troubleshooters.com> ha scritto: > >> Paolo M said on Wed, 10 Apr 2024 22:22:31 +0200 >> >> >On opensuse 15, i have just installed the noto font, but probably lyx >> >has also been upgrated to 2.4.0-RC4. Now lyx doe not work eny more. >> >Opening a file, see the enclosed one as an example, i get the error >> >below p. >> >> Just so we're all on the same page, you know your attachment contains >> no string "noto", right? >> >> Not only that, but on my computer using LyX 2.3.6.1 on an up-to-date >> Void Linux, your document works perfectly. But you knew that already. >> >> In order to use Noto fonts, I took your document in LyX and did the >> following: >> >> 1) On Document>Settings>Fonts I checked "Use non-TeX fonts. >> >> 2) Document>Settings>Fonts>Roman I chose Noto Serif [GOOG] >> >> 3) Document>Settings>Fonts>Sans Serif I chose Noto Sans [GOOG] >> >> 4) Document>Settings>Fonts>Typewriter I chose Noto Sans Mono [GOOG] >> >> 5) Document>View [PDF (LuaTeX)] to compile and view the result. >> >> I've attached my doc with Noto fonts. >> >> Maybe you'll get lucky and my file will compile. Try it. >> >> HTH, >> >> SteveT >> >> Steve Litt >> >> Autumn 2023 featured book: Rapid Learning for the 21st Century >> http://www.troubleshooters.com/rl21 >> -- >> lyx-users mailing list >> lyx-users@lists.lyx.org >> http://lists.lyx.org/mailman/listinfo/lyx-users >> > > > -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Lyx error
Your lyx file raises the same error. The option 'Use non-TeX fonts' cannot be selected, although the required fontspec package is installed. As i try to view the pdf rendering i get: "The external program xelatex finished with an error. It is recommended you fix the cause of the external program's error (check the logs). " What is xelatex? I suspect my texlive installation cannot accept spaces in file names and directories any more. thank you p. Il giorno gio 11 apr 2024 alle ore 00:41 Steve Litt < sl...@troubleshooters.com> ha scritto: > Paolo M said on Wed, 10 Apr 2024 22:22:31 +0200 > > >On opensuse 15, i have just installed the noto font, but probably lyx > >has also been upgrated to 2.4.0-RC4. Now lyx doe not work eny more. > >Opening a file, see the enclosed one as an example, i get the error > >below p. > > Just so we're all on the same page, you know your attachment contains > no string "noto", right? > > Not only that, but on my computer using LyX 2.3.6.1 on an up-to-date > Void Linux, your document works perfectly. But you knew that already. > > In order to use Noto fonts, I took your document in LyX and did the > following: > > 1) On Document>Settings>Fonts I checked "Use non-TeX fonts. > > 2) Document>Settings>Fonts>Roman I chose Noto Serif [GOOG] > > 3) Document>Settings>Fonts>Sans Serif I chose Noto Sans [GOOG] > > 4) Document>Settings>Fonts>Typewriter I chose Noto Sans Mono [GOOG] > > 5) Document>View [PDF (LuaTeX)] to compile and view the result. > > I've attached my doc with Noto fonts. > > Maybe you'll get lucky and my file will compile. Try it. > > HTH, > > SteveT > > Steve Litt > > Autumn 2023 featured book: Rapid Learning for the 21st Century > http://www.troubleshooters.com/rl21 > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users > -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Lyx error
On opensuse 15, i have just installed the noto font, but probably lyx has also been upgrated to 2.4.0-RC4. Now lyx doe not work eny more. Opening a file, see the enclosed one as an example, i get the error below p. Moreover, the pdf rendering cannot be viewenc. my error message The selected document class Article (Standard Class) requires external files that are not available. The document class can still be used, but the document cannot be compiled until the following prerequisites are installed: article.cls See section 3.1.2.2 (Class Availability) of the User's Guide for more information. mb.lyx Description: application/lyx -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Table in table
Yes, It works if the cursor is on the right of the math inset. That is strange! Happy that it's been fixed in 2.4 Paolo M Pumilia, t. +39 347 231 54 96 Il dom 10 mar 2024, 15:04 Jürgen Spitzmüller ha scritto: > Am Sonntag, dem 10.03.2024 um 14:52 +0100 schrieb Paolo M: > > - Open mu tables-test.lyx doc > > - Enter the cursor in the table cell containing the math expression > > a+b, but keep it outside the math inset > > - Open the context menu (right mouse or touchpad button) > > - Go to settings > > - Apply your changes ( i have set default additional space to 'top of > > row') > > - You Will notice that the 'apply' button stays inactive, gray out. > > - as you close and reopen the settings pane, you find that your > > changes have not been applied > > Thanks. This works if you put the cursor after the math inset, and it > works also before in LyX 2.4, so it seems to have been fixed for the > next major release. > > -- > Jürgen > -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Table in table
- Open mu tables-test.lyx doc - Enter the cursor in the table cell containing the math expression a+b, but keep it outside the math inset - Open the context menu (right mouse or touchpad button) - Go to settings - Apply your changes ( i have set default additional space to 'top of row') - You Will notice that the 'apply' button stays inactive, gray out. - as you close and reopen the settings pane, you find that your changes have not been applied p. Paolo M Pumilia, t. +39 347 231 54 96 Il dom 10 mar 2024, 14:35 Jürgen Spitzmüller ha scritto: > Am Sonntag, dem 10.03.2024 um 14:27 +0100 schrieb Paolo M: > > Cursor was not in the math inset, but in the same cell. Table > > properties could not be changed. > > What do you mean by the latter? Is the menu entry greyed out? Is it not > there? Or something else? > > Please describe _precisely_ (step by step) what you have done, and what > happened. Otherwise it is hard for us to follow you. > > -- > Jürgen > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users > -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Table in table
Cursor was not in the math inset, but in the same cell. Table properties could not be changed. Paolo M Pumilia, t. +39 347 231 54 96 Il dom 10 mar 2024, 08:29 Jürgen Spitzmüller ha scritto: > Am Samstag, dem 09.03.2024 um 21:57 +0100 schrieb Paolo M: > > I have put the cursor inside the cell containing the math expression. > > I have noticed that putting the cursor in cells not containing the > > math expression, editing table properties is allowed. > > Is that a feature? > > There are two possible behaviors you might refer to: > > 1. Entering table settings via main menu (Edit > Table Settings...) is > possible in LyX 2.3 but changes are not applied. This is a bug that > (seems to be) fixed in LyX 2.4. > > 2. The context menu doesn't show the respective items. This not a > feature but it is somewhat expected as long as the cursor is in the > math inset. You'll see the same with any other inset (e.g., note). > If you put it before or after the math inset (in that same cell) it > works. Procedure 1 does exactly that, BTW. It puts the cursor out of > the math inset before the dialog is opened (but in LyX 2.3, some update > is then missing). > > -- > Jürgen > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users > -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Table in table
I have put the cursor inside the cell containing the math expression. I have noticed that putting the cursor in cells not containing the math expression, editing table properties is allowed. Is that a feature? Il giorno sab 9 mar 2024 alle ore 21:51 Jean-Marc Lasgouttes < lasgout...@lyx.org> ha scritto: > Le 09/03/2024 à 14:24, Paolo M a écrit : > > I cannot change table properties (borders and additional space) if the > > table, contained in another table, contains a math expression (a+b, in > > this case). > > Here included my example lyx doc > > Hi, where do you put the cursor and what action do you perform? > > JMarc > > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users > -- --- Paolo M. Pumilia - 347 231 54 96. -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Table in table
I cannot change table properties (borders and additional space) if the table, contained in another table, contains a math expression (a+b, in this case). Here included my example lyx doc paolo m. tables-test.lyx Description: application/lyx -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: tikz preview
Here enclosed the log file pertaining to test2-tikz-preview.lyx Il giorno sab 1 lug 2023 alle ore 14:27 Jürgen Spitzmüller < jspi...@gmail.com> ha scritto: > Am Dienstag, dem 27.06.2023 um 07:11 +0200 schrieb Paolo M: > > New test: Pic A cannot be previewed, Pic A' can be previewed > > In Pic A' the option > > domain=-2:6 > > has been added to just one of the two plots. > > Both preview fine here. Again, please provide the lyxpreview[...].log > files. > > -- > Jürgen > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users > -- --- Paolo M. Pumilia - 347 231 54 96. This is pdfTeX, Version 3.141592653-2.6-1.40.22 (TeX Live 2021/TeX Live for SUSE Linux) (preloaded format=latex 2022.7.11) 3 JUL 2023 15:47 entering extended mode restricted \write18 enabled. %&-line parsing enabled. **lyxpreviewIlwEHq.tex (./lyxpreviewIlwEHq.tex LaTeX2e <2020-10-01> patch level 4 L3 programming layer <2021-02-18> (/usr/share/texmf/tex/latex/base/article.cls Document Class: article 2020/04/10 v1.4m Standard LaTeX document class (/usr/share/texmf/tex/latex/base/size11.clo File: size11.clo 2020/04/10 v1.4m Standard LaTeX file (size option) ) \c@part=\count179 \c@section=\count180 \c@subsection=\count181 \c@subsubsection=\count182 \c@paragraph=\count183 \c@subparagraph=\count184 \c@figure=\count185 \c@table=\count186 \abovecaptionskip=\skip47 \belowcaptionskip=\skip48 \bibindent=\dimen138 ) (/usr/share/texmf/tex/latex/psnfss/mathpazo.sty Package: mathpazo 2020/03/25 PSNFSS-v9.3 Palatino w/ Pazo Math (D.Puga, WaS) \symupright=\mathgroup4 ) (/usr/share/texmf/tex/latex/base/fontenc.sty Package: fontenc 2020/08/10 v2.0s Standard LaTeX package LaTeX Font Info:Trying to load font information for T1+ppl on input line 11 2. (/usr/share/texmf/tex/latex/psnfss/t1ppl.fd File: t1ppl.fd 2001/06/04 font definitions for T1/ppl. )) (/usr/share/texmf/tex/latex/base/inputenc.sty Package: inputenc 2020/08/01 v1.3d Input encoding file \inpenc@prehook=\toks15 \inpenc@posthook=\toks16 ) (/usr/share/texmf/tex/latex/geometry/geometry.sty Package: geometry 2020/01/02 v5.9 Page Geometry (/usr/share/texmf/tex/latex/graphics/keyval.sty Package: keyval 2014/10/28 v1.15 key=value parser (DPC) \KV@toks@=\toks17 ) (/usr/share/texmf/tex/generic/iftex/ifvtex.sty Package: ifvtex 2019/10/25 v1.7 ifvtex legacy package. Use iftex instead. (/usr/share/texmf/tex/generic/iftex/iftex.sty Package: iftex 2020/03/06 v1.0d TeX engine tests )) \Gm@cnth=\count187 \Gm@cntv=\count188 \c@Gm@tempcnt=\count189 \Gm@bindingoffset=\dimen139 \Gm@wd@mp=\dimen140 \Gm@odd@mp=\dimen141 \Gm@even@mp=\dimen142 \Gm@layoutwidth=\dimen143 \Gm@layoutheight=\dimen144 \Gm@layouthoffset=\dimen145 \Gm@layoutvoffset=\dimen146 \Gm@dimlist=\toks18 ) (/usr/share/texmf/tex/latex/fancyhdr/fancyhdr.sty Package: fancyhdr 2021/01/28 v4.0.1 Extensive control of page headers and foote rs \f@nch@headwidth=\skip49 \f@nch@O@elh=\skip50 \f@nch@O@erh=\skip51 \f@nch@O@olh=\skip52 \f@nch@O@orh=\skip53 \f@nch@O@elf=\skip54 \f@nch@O@erf=\skip55 \f@nch@O@olf=\skip56 \f@nch@O@orf=\skip57 ) (/usr/share/texmf/tex/latex/tools/array.sty Package: array 2020/10/01 v2.5c Tabular extension package (FMi) \col@sep=\dimen147 \ar@mcellbox=\box47 \extrarowheight=\dimen148 \NC@list=\toks19 \extratabsurround=\skip58 \backup@length=\skip59 \ar@cellbox=\box48 ) (/usr/share/texmf/tex/latex/pgfplots/pgfplots.sty (/usr/share/texmf/tex/gener ic/pgfplots/pgfplots.revision.tex) Package: pgfplots 2020/02/29 v1.17 Data Visualization (1.17) (/usr/share/texmf/tex/latex/graphics/graphicx.sty Package: graphicx 2020/09/09 v1.2b Enhanced LaTeX Graphics (DPC,SPQR) (/usr/share/texmf/tex/latex/graphics/graphics.sty Package: graphics 2020/08/30 v1.4c Standard LaTeX Graphics (DPC,SPQR) (/usr/share/texmf/tex/latex/graphics/trig.sty Package: trig 2016/01/03 v1.10 sin cos tan (DPC) ) (/usr/share/texmf/tex/latex/graphics-cfg/graphics.cfg File: graphics.cfg 2016/06/04 v1.11 sample graphics configuration ) Package graphics Info: Driver file: dvips.def on input line 105. (/usr/share/texmf/tex/latex/graphics-def/dvips.def File: dvips.def 2017/06/20 v3.1d Graphics/color driver for dvips )) \Gin@req@height=\dimen149 \Gin@req@width=\dimen150 ) (/usr/share/texmf/tex/latex/pgf/frontendlayer/tikz.sty (/usr/share/texmf/tex/ latex/pgf/basiclayer/pgf.sty (/usr/share/texmf/tex/latex/pgf/utilities/pgfrcs.s ty (/usr/share/texmf/tex/generic/pgf/utilities/pgfutil-common.tex \pgfutil@everybye=\toks20 \pgfutil@tempdima=\dimen151 \pgfutil@tempdimb=\dimen152 (/usr/share/texmf/tex/generic/pgf/utilities/pgfutil-common-lists.tex)) (/usr/sh are/texmf/tex/generic/pgf/utilities/pgfutil-latex.def \pgfutil@abb=\box49 ) (/usr/share/texmf/tex/generic/pgf/utilities/pgfrcs.code.tex (/usr/share/texmf /tex/generic/pgf/pgf.revision.tex) Package: pgfrcs 2020/12/27 v3.1.8b (3.1.8b) )) Package: pgf 2020/12/27 v3.1.8b (3.1.8b) (/usr/share/texmf/tex/latex/
Re: tikz preview
New test: Pic A cannot be previewed, Pic A' can be previewed In Pic A' the option domain=-2:6 has been added to just one of the two plots. P. Il giorno dom 18 giu 2023 alle ore 20:03 Paolo M < paolo.m.pumilia.gnar...@gmail.com> ha scritto: > Here enclosed, my test lyx file, with some unexplained features: > 1) there is a line before the table, in the pdf > 2) Pic A cannot be previewed > 3) Pic B' (differing from B only for the x range) cannot be previewed > > Any help will be appreciated > thank you > > -- > --- Paolo M. Pumilia - 347 231 54 96. > -- --- Paolo M. Pumilia - 347 231 54 96. test2-tikz-preview.lyx Description: application/lyx -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: tikz preview
Preview of Pic B and B' now works. It was probably only a matter of time. Preview of Pic A does not work, yet. How to set non-tex-fonts? Il giorno dom 18 giu 2023 alle ore 20:54 Kornel Benko ha scritto: > Am Sun, 18 Jun 2023 20:03:29 +0200 > schrieb Paolo M : > > > Here enclosed, my test lyx file, with some unexplained features: > > 1) there is a line before the table, in the pdf > > 2) Pic A cannot be previewed > > 3) Pic B' (differing from B only for the x range) cannot be previewed > > > > Any help will be appreciated > > thank you > > > > Interesting, preview works here if setting non-tex-fonts. > > Kornel > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users > -- --- Paolo M. Pumilia - 347 231 54 96. -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
tikz preview
Here enclosed, my test lyx file, with some unexplained features: 1) there is a line before the table, in the pdf 2) Pic A cannot be previewed 3) Pic B' (differing from B only for the x range) cannot be previewed Any help will be appreciated thank you -- --- Paolo M. Pumilia - 347 231 54 96. test-tikz-preview.lyx Description: application/lyx -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Colors in dark theme
It is difficult to edit math expressions, with dark theme, since text is dark blue on black, before rendering. Color combination will improve, next release? thank you -- --- Paolo M. Pumilia - 347 231 54 96. -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: preview of tikz pictures
Succeded, thank you
Il giorno gio 23 mar 2023 alle ore 16:49 Paul A. Rubin
ha scritto:
> On 3/23/23 11:25, Paolo M wrote:
>
> Here enclosed, two lyx docs: expo2 and expo3 differing just in one
> (commented out) line in their preamble:
> expo2: %\lfoot{ }
> expo3: %\lfoot{ è }
>
> Both docs produce their pdf file but the weird thing is that, in expo3,
> picture cannot be previewed in lyx.
> How can a comment in preamble affect preview?
>
> Any ideas?
>
> thank you
>
> Paolo M.
>
> --
> --- Paolo M. Pumilia - 347 231 54 96.
>
> I'm not exactly sure why it happens, but when LyX tries to render the
> picture into a graphic image, the Python script fails because both epstopdf
> and pdflatex choke on the accented symbol, despite it being in a comment.
>
> One solution is to go into Document > Settings... > Language and switch
> the encoding from "Language default" to Unicode (UTF-8). Save the changed
> document, close it and reload it, and the image is previewed.
>
> Paul
>
> --
> lyx-users mailing list
> lyx-users@lists.lyx.org
> http://lists.lyx.org/mailman/listinfo/lyx-users
>
--
--- Paolo M. Pumilia - 347 231 54 96.
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
preview of tikz pictures
Here enclosed, two lyx docs: expo2 and expo3 differing just in one
(commented out) line in their preamble:
expo2: %\lfoot{ }
expo3: %\lfoot{ è }
Both docs produce their pdf file but the weird thing is that, in expo3,
picture cannot be previewed in lyx.
How can a comment in preamble affect preview?
Any ideas?
thank you
Paolo M.
--
--- Paolo M. Pumilia - 347 231 54 96.
espo3.lyx
Description: application/lyx
espo2.lyx
Description: application/lyx
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
lyx in plasma sessions
I cannot preserve open lyx files through plama/kde sessions, is there a way to obtain that? Moreover all lyx files open as tabs of the first open file. I would like to open lyx files in the current plasma activity file manager is in and stay there through kde sessions. Is that possible? thank you pol -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
A more effective error correction mechanism
The editor in gmail underlines in red words that cannot be founf in its vocabulary, as lyx does, but it differs in correction, carried out without right clicking: just left clicking on that word pops up the list of 1) alternatives and 2) possible splitting Then - if you click on any item of that list, word is corrected accordingly. Left clicking on a word not underlined does not trigger any popups, just places the cursor. - if you delete the list of the alternatives, that word is included in you personal dictionary Please can anyone check this out? I think it would be convenient to implement that mechanism in lyx. thank you pol -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: 'su lyx' changes file access privileges
Pavel Sanda wrote: > On Wed, Sep 30, 2020 at 10:04:20AM +0200, Pavel Sanda wrote: >> On Sun, Sep 27, 2020 at 04:31:24PM +0200, paolo m. wrote: >> > > Here it is for example >> > > $ umask >> > > 22 >> > > >> > > Kornel >> > >> > Umask is the same for both users: >> > % umask >> > 002 >> > >> > >> > % grep -i umask /etc/zshenv >> > umask u=rwx,g=rwx,o=rx >> >> Does umask output changes if you invoke su with '-', i.e. >> su - user2 > > Actually could you try to run lyx under '-' scenario as well? P % su - user2 % umask 002 Umask does not change and lyx starts. File privileges are changed, as before. p. -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: 'su lyx' changes file access privileges
Scott Kostyshak wrote: > On Sun, Sep 27, 2020 at 04:31:24PM +0200, paolo m. wrote: >> Kornel Benko wrote: >> >> > Am Sun, 27 Sep 2020 14:03:44 +0200 >> > schrieb "paolo m. " : >> > >> >> Kornel Benko wrote: >> >> >> >> > Am Sun, 27 Sep 2020 13:19:52 +0200 >> >> > schrieb "paolo m." : >> >> > >> >> >> Sometimes, while in user1 session, I find convenient launching lyx >> >> >> as user2 >> >> >> (same group as user1) to open a lyx file, through 'su'. >> >> >> As user2 changes and save that file, access privileges are changed >> >> >> as well. That does not happen when a text file is opened by kwrite, >> >> >> so it should be something specific to lyx. >> >> >> >> >> >> Before 'su' switch: >> >> >> text file x-rw-rw-r-- >> >> >> lyx file xx.lyx-rw-rw-r-- >> >> >> >> >> >> Switching and modifying file x (by kwrite) and xx.lyx (by lyx): >> >> >> x -rw-rw-r-- >> >> >> xx.lyx -rw--- >> >> >> >> >> >> (Same results when launching 'dolphin' file manager as user2 to >> >> >> open a lyx file, through 'su''). >> >> >> >> >> > >> >> > Have you checked the setting of 'umask' for both users? >> >> > >> >> > Kornel >> >> Yes, umask is set in /etc/zshenv; kwrite complies with that >> >> specification Maybe lyx reads a different umask setting? >> >> >> >> thanks >> >> >> >> p. >> >> >> > >> > Hm, I meant the output of the command 'umask'. >> > Maybe it is set be /etc/zshenv, but there may be different handling >> > (like include of user specific file). >> > >> > Here it is for example >> > $ umask >> > 22 >> > >> > Kornel >> >> Umask is the same for both users: >> % umask >> 002 >> >> >> % grep -i umask /etc/zshenv >> umask u=rwx,g=rwx,o=rx > > Is the following discussion related? > > https://www.mail-archive.com/search?l=mid=ptceag%245s5%241%40blaine.gmane.org > > Scott Yes, that was me. That malfunction was fixed by Pavel Sanda This seems to be a different issue. p. -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: 'su lyx' changes file access privileges
Kornel Benko wrote: > Am Sun, 27 Sep 2020 14:03:44 +0200 > schrieb "paolo m. " : > >> Kornel Benko wrote: >> >> > Am Sun, 27 Sep 2020 13:19:52 +0200 >> > schrieb "paolo m." : >> > >> >> Sometimes, while in user1 session, I find convenient launching lyx as >> >> user2 >> >> (same group as user1) to open a lyx file, through 'su'. >> >> As user2 changes and save that file, access privileges are changed as >> >> well. That does not happen when a text file is opened by kwrite, so it >> >> should be something specific to lyx. >> >> >> >> Before 'su' switch: >> >> text file x-rw-rw-r-- >> >> lyx file xx.lyx-rw-rw-r-- >> >> >> >> Switching and modifying file x (by kwrite) and xx.lyx (by lyx): >> >> x -rw-rw-r-- >> >> xx.lyx -rw--- >> >> >> >> (Same results when launching 'dolphin' file manager as user2 to open >> >> a lyx file, through 'su''). >> >> >> > >> > Have you checked the setting of 'umask' for both users? >> > >> > Kornel >> Yes, umask is set in /etc/zshenv; kwrite complies with that >> specification Maybe lyx reads a different umask setting? >> >> thanks >> >> p. >> > > Hm, I meant the output of the command 'umask'. > Maybe it is set be /etc/zshenv, but there may be different handling (like > include of user specific file). > > Here it is for example > $ umask > 22 > > Kornel Umask is the same for both users: % umask 002 % grep -i umask /etc/zshenv umask u=rwx,g=rwx,o=rx p. -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: 'su lyx' changes file access privileges
Kornel Benko wrote: > Am Sun, 27 Sep 2020 13:19:52 +0200 > schrieb "paolo m." : > >> Sometimes, while in user1 session, I find convenient launching lyx as >> user2 >> (same group as user1) to open a lyx file, through 'su'. >> As user2 changes and save that file, access privileges are changed as >> well. That does not happen when a text file is opened by kwrite, so it >> should be something specific to lyx. >> >> Before 'su' switch: >> text file x-rw-rw-r-- >> lyx file xx.lyx-rw-rw-r-- >> >> Switching and modifying file x (by kwrite) and xx.lyx (by lyx): >> x -rw-rw-r-- >> xx.lyx -rw--- >> >> (Same results when launching 'dolphin' file manager as user2 to open a >> lyx file, through 'su''). >> > > Have you checked the setting of 'umask' for both users? > > Kornel Yes, umask is set in /etc/zshenv; kwrite complies with that specification Maybe lyx reads a different umask setting? thanks p. -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
'su lyx' changes file access privileges
Sometimes, while in user1 session, I find convenient launching lyx as user2 (same group as user1) to open a lyx file, through 'su'. As user2 changes and save that file, access privileges are changed as well. That does not happen when a text file is opened by kwrite, so it should be something specific to lyx. Before 'su' switch: text file x-rw-rw-r-- lyx file xx.lyx-rw-rw-r-- Switching and modifying file x (by kwrite) and xx.lyx (by lyx): x -rw-rw-r-- xx.lyx -rw--- (Same results when launching 'dolphin' file manager as user2 to open a lyx file, through 'su''). -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
computer algebra system output
I would like the output of computer algebra systems (cas) not to replace input command. Input command could be preserved in math mode, while cas output would be displayed as graphic preview. E.g. Entered text: Equation [x+1=0] yields [[ solve(x+1=0,x) ]] with [] to mark math mode and [[]] to mark math mode input to Maxima cas, would be rendered as Equation x+1=0 yields x=-1 Any comments? thank you Paolo M. -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
more infos at the window bottom
Is it possible to get info about paragraph type, at the bottom frame of the lyx window? Currently only character type is displayed. thank you paolo m.
Re: characters marked in red
Jean-Marc Lasgouttes wrote: > Le 19/01/2019 à 10:34, paolo m. a écrit : >> Jean-Marc Lasgouttes wrote: >> >>> >>> This is a feature (good or bad) : previews that are too small, where >>> "small" is defined as 0.1in (used to be hardcoded to 10 pixels) are >>> marked in red. >>> >>> This is probably what you see here. >>> >> >> That happens on Lenovo B590 /ubuntu , not on hp elitebook / opensuse . >> same lyx 2.3.2 > > What other differences in terms of screen resolution and zoom level? We > may have a bug in this respect. > >> How to change preview? > > Well, you can disable previews for math in the preferences, but it is > probably too much. > > JMarc While my test file is open, as I change the instant preview size from 1.0 to 1.2 i get : Assertion false violated in file: ../../src/CoordCache.cpp, line: 31 There has been an error with this document. LyX will attempt to close it safely. The current document was closed. Followed by : SIGSEGV signal caught! Sorry, you have found a bug in LyX, hope you have not lost any data. Please read the bug-reporting instructions in 'Help->Introduction' and send us a bug report, if necessary. Thanks! Bye. Then I open another file and perform the above change in preview size, eveything is ok. Reopening my test file afterwards, red marks are not shown any more paolo m.
Re: characters marked in red
Jean-Marc Lasgouttes wrote: > > This is a feature (good or bad) : previews that are too small, where > "small" is defined as 0.1in (used to be hardcoded to 10 pixels) are > marked in red. > > This is probably what you see here. > That happens on Lenovo B590 /ubuntu , not on hp elitebook / opensuse . same lyx 2.3.2 How to change preview? thank you paolo m.
characters marked in red
In math mode, characters c,e,r,s,z are marked in red in lyx display, but not so if they are next to other characters, as in ar or ae. (see enclosed picture). I cannot see why. Any ideas? Lyx is 2.3.2 thank you paolo m. mathchar-test.lyx Description: application/lyx
tikz picture rendering
A circle appears downward shifted and cut off, in LyX display, when paragraph separation is set 'vertical space", as in circle-no-good.lyx Pdf rendering is different in the two files, as well. paolo m. circles.lyx Description: application/lyx circle-no-good.lyx Description: application/lyx
live http links?
I would like to insert 'live' links in my lyx document, that can be handed over a web browser. Will that be possible in a next lyx release? paolo m.
Re: lyx changes the file access privileges
paolo m. wrote: > As i change a lyx file name (say test1.lyx ) with a new name (say > test2.lyx) , by the command 'file -> save as', the new file created has > the usual access mode, but, when saved, its mode change so that is > inaccessible to groups and to the world. That is not only true when saving to a new file. Also when saving the same file, access privileges are restored to -rw- I have to chmod before syncing, each time, , that is very annoying. paolo m.
Re: lyx changes the file access privileges
Daniel Kian Mc Kiernan (the best Daniel of the bunch) wrote: > There is no practical problem for me here, and a practical problem > could be addressed by chmod. But the situation is puzzling. Files with access mode: -rw cannot be synced with the dropbox paolo m.
lyx changes the file access privileges
As i change a lyx file name (say test1.lyx ) with a new name (say test2.lyx) , by the command 'file -> save as', the new file created has the usual access mode, but, when saved, its mode change so that is inaccessible to groups and to the world. That does not happen when test1.lyx is opened by a text editor, e.g. kate, then saved with a new name (say test3.lyx) Here is the result: % ll *lyx pol pol test3.lyx 1745 21:54 -rw-rw-r-- pol pol test2.lyx 1746 21:53 -rw--- pol pol test1.lyx 1745 21:52 -rw-rw-r-- Any ideas? thank you paolo m.
background of branches
Both background and text are dark, black in branches in 2.3.1. Probably i have mixed up colors by mistake. How to fix? Add to this that background of new branches is red. That was the default, even before ver 2.3.1. Only re-opened file displayed branch background colour the same as normal text background. What is wrong? thank you paolo m.
Re: auto fixing mispelled words
Daniel Kian Mc Kiernan (the best Daniel of the bunch) wrote: > > You've not answered my actual question. A feature of the sort that > you propose is not likely to be popular; the vast majority of people > would, in constructing the underlying look-up table, find themselves > learning not to make the mistakes in the first place. Sorry for my delay, i am not a 'heavy' news readers user. I do not know whether that feature would be popular, but it would be useful for a number of lyx users. I am not able to 'learn' how not to make typos. Do you? Is is not a matter of learning, it is our mind functioning that swaps letter positions or doubles next letters while quickly writing text lines Restoring the correct letters order for each word quickly would be a great favour to a number of long paper writers. regards paolo m.
weird language management
I have noticed that spellchecker does not work, if an alternative language has been given. Is that a bug? paolo m.
Re: Sharpness of lyx characters
You were right JMarc, after upgrading to 2.3.1 problem solved thank you I answered a few days ago, but my knode refused to send to newsgroups. p. Il giorno dom 7 ott 2018 alle ore 14:01 Jean-Marc Lasgouttes < lasgout...@lyx.org> ha scritto: > Le 23/08/2018 à 17:35, Pol a écrit : > > screen characters in lyx on hp-elitebook x360, appear unclear, i would > > say that 'ink density' is not uniform. > > No change switching to different fonts. > > All applications display clear characters, except LyX > > Lyx runs on opensuse leap 15 / plasma > > Hi Paolo, > > Did you update to LyX 2.3.1? If yes, does this address your issue? > > JMarc > > -- -- Paolo M. Pumilia-Gnarini voce: 347 231 5496, 339 394 2413
label to tikz?
How to attach label to a tikz picture, so as to be able to make a reference to it from my text? thank you
Wrapping text arund a tikz picture?
Anybody succeeded to let text wrap around tikz picture, while preserving its preview mode? thank you
Re: Equations displaced on the screen
Jean-Marc Lasgouttes wrote: > when editing the equation. Would that solve your problem? > > This is ticket http://www.lyx.org/trac/ticket/10668 > > JMarc That seems to be the problem. Anyway, just a little inconvenience. thank you p.
Equations displaced on the screen
Equations with labels appear largely displaced on the right side of the lyx window on the screen, as pointer switches focus from the math mode of that equation to the text display mode. (Equations are correctly centered with numbers on the right, when my file gets printed out). Using lyx 2.2.3 on linux suse Here included a test document. thank you Paolo test-equation.lyx Description: application/lyx
Re: hebrew font
Guenter Milde wrote: On 2013-04-02, xpol wrote: The information given is not sufficient for more help than guesses. What OS are you using? Which LaTeX distribution? Where did you get the package from (via LaTeX distribution, manual download from CTAN, or...)? Sometimes it is sufficient to run mktexlr or texhash, but with font installations there are some more helper programs required... I am using 'texlive' for linux/opensuse 12.3 I had tried 'texhash', but no avail thank you -- -- Paolo M Pumilia-Gnarini noether workstation .- Mob 333 7813 092, 347 2315 496
Re: hebrew font
Guenter Milde wrote: On 2013-04-02, xpol wrote: The information given is not sufficient for more help than guesses. What OS are you using? Which LaTeX distribution? Where did you get the package from (via LaTeX distribution, manual download from CTAN, or...)? Sometimes it is sufficient to run mktexlr or texhash, but with font installations there are some more helper programs required... I am using 'texlive' for linux/opensuse 12.3 I had tried 'texhash', but no avail thank you -- -- Paolo M Pumilia-Gnarini noether workstation .- Mob 333 7813 092, 347 2315 496
Re: hebrew font
Guenter Milde wrote: On 2013-04-02, xpol wrote: The information given is not sufficient for more help than guesses. What OS are you using? Which LaTeX distribution? Where did you get the package from (via LaTeX distribution, manual download from CTAN, or...)? Sometimes it is sufficient to run mktexlr or texhash, but with font installations there are some more helper programs required... I am using 'texlive' for linux/opensuse 12.3 I had tried 'texhash', but no avail thank you -- -- Paolo M Pumilia-Gnarini noether workstation .- Mob 333 7813 092, 347 2315 496
Re: hebrew font
Guenter Milde wrote: On 2013-04-02, xpol wrote: The information given is not sufficient for more help than guesses. What OS are you using? Which LaTeX distribution? Where did you get the package from (via LaTeX distribution, manual download from CTAN, or...)? Sometimes it is sufficient to run mktexlr or texhash, but with font installations there are some more helper programs required... I am using 'texlive' for linux/opensuse 12.3 I had tried 'texhash', but no avail thank you -- -- Paolo M Pumilia-Gnarini noether workstation .- Mob 333 7813 092, 347 2315 496
Re: hebrew font
Guenter Milde wrote: > On 2013-04-02, xpol wrote: > The information given is not sufficient for more help than guesses. > > What OS are you using? Which LaTeX distribution? Where did you get the > package from (via LaTeX distribution, "manual" download from CTAN, or...)? > > Sometimes it is sufficient to run "mktexlr" or "texhash", but with font > installations there are some more helper programs required... > I am using 'texlive' for linux/opensuse 12.3 I had tried 'texhash', but no avail thank you -- -- Paolo M Pumilia-Gnarini noether workstation .- Mob 333 7813 092, 347 2315 496
Re: hebrew font
Guenter Milde wrote: > On 2013-04-02, xpol wrote: > The information given is not sufficient for more help than guesses. > > What OS are you using? Which LaTeX distribution? Where did you get the > package from (via LaTeX distribution, "manual" download from CTAN, or...)? > > Sometimes it is sufficient to run "mktexlr" or "texhash", but with font > installations there are some more helper programs required... > I am using 'texlive' for linux/opensuse 12.3 I had tried 'texhash', but no avail thank you -- -- Paolo M Pumilia-Gnarini noether workstation .- Mob 333 7813 092, 347 2315 496
Re: unofficial deb package
From Jean-Marc Lasgouttes, Fri Apr 13, at 11:50: .Please tell me if you want it uploaded to ftp.lyx.org. I'm sure such a .package would be useful. sure you are welcome! -- Paolo Pumilia email: [EMAIL PROTECTED] visit our (under construction) web site: www.linfe.it
Re: unofficial deb package
From Jean-Marc Lasgouttes, Fri Apr 13, at 11:50: .Please tell me if you want it uploaded to ftp.lyx.org. I'm sure such a .package would be useful. sure you are welcome! -- Paolo Pumilia email: [EMAIL PROTECTED] visit our (under construction) web site: www.linfe.it
Re: unofficial deb package
>From Jean-Marc Lasgouttes, Fri Apr 13, at 11:50: .Please tell me if you want it uploaded to ftp.lyx.org. I'm sure such a .package would be useful. sure you are welcome! -- Paolo Pumilia email: [EMAIL PROTECTED] visit our (under construction) web site: www.linfe.it
unofficial deb package
I have just packaged, for personal use, the latest lyx release 1.1.6fix1, on i686 hardware platform and debian/sid system (libc6 = 2.2.1-2 required) It can be retrieved at the url http://www.linfe.it/OpenLab/DebianPackages/unstable/contrib/lyx_1.1.6fix1-1_i386.deb It is just my first attempt to build a deb package, so please let me know if you will find it useful cheers -- Paolo Pumilia email: [EMAIL PROTECTED]
unofficial deb package
I have just packaged, for personal use, the latest lyx release 1.1.6fix1, on i686 hardware platform and debian/sid system (libc6 = 2.2.1-2 required) It can be retrieved at the url http://www.linfe.it/OpenLab/DebianPackages/unstable/contrib/lyx_1.1.6fix1-1_i386.deb It is just my first attempt to build a deb package, so please let me know if you will find it useful cheers -- Paolo Pumilia email: [EMAIL PROTECTED]
unofficial deb package
I have just packaged, for personal use, the latest lyx release 1.1.6fix1, on i686 hardware platform and debian/sid system (libc6 >= 2.2.1-2 required) It can be retrieved at the url http://www.linfe.it/OpenLab/DebianPackages/unstable/contrib/lyx_1.1.6fix1-1_i386.deb It is just my first attempt to build a deb package, so please let me know if you will find it useful cheers -- Paolo Pumilia email: [EMAIL PROTECTED]
margin notes
Width allowed to margin notes seems to be predefined, independent on the right border witdh. What latex command to change that value? thank you Pol P.S. Maybe making that parameter be a function of the border width, could be a good idea, allowing margin notes automatically fitting available room. -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: margin notes
From Benjamin Korvemaker, Fri Sep 15, at 10:30: .On Fri, Sep 15, 2000 at 10:44:23AM +0200, Paolo M. Pumilia wrote: . Width allowed to margin notes seems to be predefined, independent . on the right border witdh. What latex command to change that value? .If I understand what you're asking, you need to use the latex command .\marginparwidth in the LaTeX Preamble (under the Layout Menu). . thank you, your suggestion did the trick Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
margin notes
Width allowed to margin notes seems to be predefined, independent on the right border witdh. What latex command to change that value? thank you Pol P.S. Maybe making that parameter be a function of the border width, could be a good idea, allowing margin notes automatically fitting available room. -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: margin notes
From Benjamin Korvemaker, Fri Sep 15, at 10:30: .On Fri, Sep 15, 2000 at 10:44:23AM +0200, Paolo M. Pumilia wrote: . Width allowed to margin notes seems to be predefined, independent . on the right border witdh. What latex command to change that value? .If I understand what you're asking, you need to use the latex command .\marginparwidth in the LaTeX Preamble (under the Layout Menu). . thank you, your suggestion did the trick Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
margin notes
Width allowed to margin notes seems to be predefined, independent on the right border witdh. What latex command to change that value? thank you Pol P.S. Maybe making that parameter be a function of the border width, could be a good idea, allowing margin notes automatically fitting available room. -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: margin notes
>From Benjamin Korvemaker, Fri Sep 15, at 10:30: .On Fri, Sep 15, 2000 at 10:44:23AM +0200, Paolo M. Pumilia wrote: .> Width allowed to margin notes seems to be predefined, independent .> on the right border witdh. What latex command to change that value? .If I understand what you're asking, you need to use the latex command .\marginparwidth in the LaTeX Preamble (under the Layout Menu). . thank you, your suggestion did the trick Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: the Window Name
From Jean-Marc Lasgouttes, Wed Sep 13, at 12:31: . "Paolo" == Paolo M Pumilia [EMAIL PROTECTED] writes: . .Paolo I noticed that the name of the window hosting my LyX editing .Paolo session has the form 'LyX: filename', that is the path to the .Paolo opened filename has been discarded. E.g., entering the command .Paolo % /usr/bin/X11/lyx Notes/file1.lyx spawns a window with name .Paolo 'LyX: file1.lyx' open . .Paolo Is there a way to preserve in the window name the original .Paolo argument passed along with the command? . .Do you mean exactly the argument entered or rather have the full path .to the file? preserving the full path would be enough for what i am trying to do: manage open lyx files depending on the directory they reside. thank you Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: the Window Name
From Jean-Marc Lasgouttes, Wed Sep 13, at 12:31: . "Paolo" == Paolo M Pumilia [EMAIL PROTECTED] writes: . .Paolo I noticed that the name of the window hosting my LyX editing .Paolo session has the form 'LyX: filename', that is the path to the .Paolo opened filename has been discarded. E.g., entering the command .Paolo % /usr/bin/X11/lyx Notes/file1.lyx spawns a window with name .Paolo 'LyX: file1.lyx' open . .Paolo Is there a way to preserve in the window name the original .Paolo argument passed along with the command? . .Do you mean exactly the argument entered or rather have the full path .to the file? preserving the full path would be enough for what i am trying to do: manage open lyx files depending on the directory they reside. thank you Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: the Window Name
>From Jean-Marc Lasgouttes, Wed Sep 13, at 12:31: .>>>>> "Paolo" == Paolo M Pumilia <[EMAIL PROTECTED]> writes: . .Paolo> I noticed that the name of the window hosting my LyX editing .Paolo> session has the form 'LyX: filename', that is the path to the .Paolo> opened filename has been discarded. E.g., entering the command .Paolo> % /usr/bin/X11/lyx Notes/file1.lyx spawns a window with name .Paolo> 'LyX: file1.lyx' open . .Paolo> Is there a way to preserve in the window name the original .Paolo> argument passed along with the command? . .Do you mean exactly the argument entered or rather have the full path .to the file? preserving the full path would be enough for what i am trying to do: manage open lyx files depending on the directory they reside. thank you Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
the Window Name
I noticed that the name of the window hosting my LyX editing session has the form 'LyX: filename', that is the path to the opened filename has been discarded. E.g., entering the command % /usr/bin/X11/lyx Notes/file1.lyx spawns a window with name 'LyX: file1.lyx' open Is there a way to preserve in the window name the original argument passed along with the command? thank you Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
the Window Name
I noticed that the name of the window hosting my LyX editing session has the form 'LyX: filename', that is the path to the opened filename has been discarded. E.g., entering the command % /usr/bin/X11/lyx Notes/file1.lyx spawns a window with name 'LyX: file1.lyx' open Is there a way to preserve in the window name the original argument passed along with the command? thank you Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
the Window Name
I noticed that the name of the window hosting my LyX editing session has the form 'LyX: filename', that is the path to the opened filename has been discarded. E.g., entering the command % /usr/bin/X11/lyx Notes/file1.lyx spawns a window with name 'LyX: file1.lyx' open Is there a way to preserve in the window name the original argument passed along with the command? thank you Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: marking position while editing
From Lars Gullik Bjønnes, Wed Apr 26, at 14:35: ."Paolo M. Pumilia" [EMAIL PROTECTED] writes: . .| Is it possible to mark the position of the doc behind the cursor, like in vi .| editing sessions, so as to be able to quickly run through the whole file? .| If not, could it be implemented in the next future? . .I am not familiar with this feature, can you explain a bit more? . In vi sesions, when pressing "m" key and then a single ascii character (say "a"), you simply add a non-visible control character, at the cursor position, within the vi buffer you are editing. You say that the mark "a" has been defined in your document. Whenever you press "'" then "a", you are quickly brought to the line that contains that mark "a". The character "'" is a command in vi. Another command (as far as i can remember, it is "`") brings you immediately on the exact cursor position (rather than the start of the line) you marked before. All control characters are discarded, when saving the doc. ciao Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: label management suggestions
From Paolo M. Pumilia, Mon Apr 10, at 8:56: .Sometimes your label to equation is only slightly different from of a previous one .or is a change of the currently assigned one. In that case, having a list of all .labels already assingned to the doc, within the insert-label window, would be very .useful. You could pick up and edit one from the list and quickly get the label you .want. . Moreover, being all labels already used within reach, could help one not to assign the same label twice. Providing an automatic check to avoid multiple use of the same label could be a good idea as well. Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: marking position while editing
From Lars Gullik Bjønnes, Wed Apr 26, at 14:35: ."Paolo M. Pumilia" [EMAIL PROTECTED] writes: . .| Is it possible to mark the position of the doc behind the cursor, like in vi .| editing sessions, so as to be able to quickly run through the whole file? .| If not, could it be implemented in the next future? . .I am not familiar with this feature, can you explain a bit more? . In vi sesions, when pressing "m" key and then a single ascii character (say "a"), you simply add a non-visible control character, at the cursor position, within the vi buffer you are editing. You say that the mark "a" has been defined in your document. Whenever you press "'" then "a", you are quickly brought to the line that contains that mark "a". The character "'" is a command in vi. Another command (as far as i can remember, it is "`") brings you immediately on the exact cursor position (rather than the start of the line) you marked before. All control characters are discarded, when saving the doc. ciao Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: label management suggestions
From Paolo M. Pumilia, Mon Apr 10, at 8:56: .Sometimes your label to equation is only slightly different from of a previous one .or is a change of the currently assigned one. In that case, having a list of all .labels already assingned to the doc, within the insert-label window, would be very .useful. You could pick up and edit one from the list and quickly get the label you .want. . Moreover, being all labels already used within reach, could help one not to assign the same label twice. Providing an automatic check to avoid multiple use of the same label could be a good idea as well. Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: marking position while editing
>From Lars Gullik Bjønnes, Wed Apr 26, at 14:35: ."Paolo M. Pumilia" <[EMAIL PROTECTED]> writes: . .| Is it possible to mark the position of the doc behind the cursor, like in vi .| editing sessions, so as to be able to quickly run through the whole file? .| If not, could it be implemented in the next future? . .I am not familiar with this feature, can you explain a bit more? . In vi sesions, when pressing "m" key and then a single ascii character (say "a"), you simply add a non-visible control character, at the cursor position, within the vi buffer you are editing. You say that the mark "a" has been defined in your document. Whenever you press "'" then "a", you are quickly brought to the line that contains that mark "a". The character "'" is a command in vi. Another command (as far as i can remember, it is "`") brings you immediately on the exact cursor position (rather than the start of the line) you marked before. All control characters are discarded, when saving the doc. ciao Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: label management suggestions
>From Paolo M. Pumilia, Mon Apr 10, at 8:56: .Sometimes your label to equation is only slightly different from of a previous one .or is a change of the currently assigned one. In that case, having a list of all .labels already assingned to the doc, within the insert-label window, would be very .useful. You could pick up and edit one from the list and quickly get the label you .want. . Moreover, being all labels already used within reach, could help one not to assign the same label twice. Providing an automatic check to avoid multiple use of the same label could be a good idea as well. Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
marking position while editing
Is it possible to mark the position of the doc behind the cursor, like in vi editing sessions, so as to be able to quickly run through the whole file? If not, could it be implemented in the next future? thanks Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
more command line options
I would like to be able to import text, sgml or tex files into my LyX session, starting lyx from a terminal. Something like % lyx -import=text-paragraph file.txt Will it be possible, in a next lyx version? Happy Easter Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
marking position while editing
Is it possible to mark the position of the doc behind the cursor, like in vi editing sessions, so as to be able to quickly run through the whole file? If not, could it be implemented in the next future? thanks Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
more command line options
I would like to be able to import text, sgml or tex files into my LyX session, starting lyx from a terminal. Something like % lyx -import=text-paragraph file.txt Will it be possible, in a next lyx version? Happy Easter Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
marking position while editing
Is it possible to mark the position of the doc behind the cursor, like in vi editing sessions, so as to be able to quickly run through the whole file? If not, could it be implemented in the next future? thanks Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
more command line options
I would like to be able to import text, sgml or tex files into my LyX session, starting lyx from a terminal. Something like % lyx -import=text-paragraph file.txt Will it be possible, in a next lyx version? Happy Easter Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
label management suggestions
Sometimes your label to equation is only slightly different from of a previous one or is a change of the currently assigned one. In that case, having a list of all labels already assingned to the doc, within the insert-label window, would be very useful. You could pick up and edit one from the list and quickly get the label you want. ciao lyxers Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
characters in labels
I noticed that extended ascii characters cannot be included in labels to equations. In the present case, it happens that the character "à" is correctly rendered within the label, while in the editing session, but it disappears the next time the file will be opened. That happens even though latin1 encoding has been set in the document layout. Could that limitation be easily removed in the netx LyX version? thank you Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
label management suggestions
Sometimes your label to equation is only slightly different from of a previous one or is a change of the currently assigned one. In that case, having a list of all labels already assingned to the doc, within the insert-label window, would be very useful. You could pick up and edit one from the list and quickly get the label you want. ciao lyxers Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
characters in labels
I noticed that extended ascii characters cannot be included in labels to equations. In the present case, it happens that the character "à" is correctly rendered within the label, while in the editing session, but it disappears the next time the file will be opened. That happens even though latin1 encoding has been set in the document layout. Could that limitation be easily removed in the netx LyX version? thank you Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
label management suggestions
Sometimes your label to equation is only slightly different from of a previous one or is a change of the currently assigned one. In that case, having a list of all labels already assingned to the doc, within the insert-label window, would be very useful. You could pick up and edit one from the list and quickly get the label you want. ciao lyxers Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
characters in labels
I noticed that extended ascii characters cannot be included in labels to equations. In the present case, it happens that the character "à" is correctly rendered within the label, while in the editing session, but it disappears the next time the file will be opened. That happens even though latin1 encoding has been set in the document layout. Could that limitation be easily removed in the netx LyX version? thank you Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: subscripts alignment
From Tuukka Toivonen, Mon Apr 03, at 12:04: .On Wed, 29 Mar 2000, Paolo M. Pumilia wrote: . Difference in subscripts positions is evident. Maybe is due to my current .Yes, I see what you mean. .As a first try you could try enabling "AMS-Math" from some menu, I think .it was in "Document Layout" popup. Worth a try, anyway. (Or disabling it .if it was enabled). Thank you. Enabling "AMS-Math" did the trick. Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: subscripts alignment
From Tuukka Toivonen, Mon Apr 03, at 12:04: .On Wed, 29 Mar 2000, Paolo M. Pumilia wrote: . Difference in subscripts positions is evident. Maybe is due to my current .Yes, I see what you mean. .As a first try you could try enabling "AMS-Math" from some menu, I think .it was in "Document Layout" popup. Worth a try, anyway. (Or disabling it .if it was enabled). Thank you. Enabling "AMS-Math" did the trick. Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: subscripts alignment
>From Tuukka Toivonen, Mon Apr 03, at 12:04: .On Wed, 29 Mar 2000, Paolo M. Pumilia wrote: .> Difference in subscripts positions is evident. Maybe is due to my current .Yes, I see what you mean. .As a first try you could try enabling "AMS-Math" from some menu, I think .it was in "Document Layout" popup. Worth a try, anyway. (Or disabling it .if it was enabled). Thank you. Enabling "AMS-Math" did the trick. Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Re: subscripts alignment
From Osvaldo Fornaro, Wed Mar 29, at 16:01:
."Paolo M. Pumilia" wrote:
. From Jean-Marc Lasgouttes, Wed Mar 29, at 10:41:
. . "Paolo" == Paolo M Pumilia [EMAIL PROTECTED] writes:
. .Paolo I noticed that subscripts, in math mode, are not aligned at the
. .Paolo same level. In postscript and dvi translation of the expression
. .Paolo (math mode) r_a - r_b subscripts a and b lay on different
. .Paolo lines, b being on the lower one.
. .
.
.Maybe you must to use \mathrm{} instead \textrm{} in math mode ...
thank you Osvaldo,
i had to use different types for a and b subscripts, to distiguish them from the
usual ones. I found that such result could be obtained by pressing alt-m-m within
the subscript prompt.
Now it seems that subscripts in the command string
\begin_inset Formula \( r_{\textrm{a}}-r_{\textrm{b}} \)
\end_inset
are not properly rendered, as they are in the more usual command
\begin_inset Formula \( r_{a}-r_{b} \)
\end_inset
Is there another way to change the character font family, in math mode?
thank you
Pol
--
Paolo Pumilia
email: [EMAIL PROTECTED]
o o o cstc o o o
Re: subscripts alignment
From Osvaldo Fornaro, Wed Mar 29, at 16:01:
."Paolo M. Pumilia" wrote:
. From Jean-Marc Lasgouttes, Wed Mar 29, at 10:41:
. . "Paolo" == Paolo M Pumilia [EMAIL PROTECTED] writes:
. .Paolo I noticed that subscripts, in math mode, are not aligned at the
. .Paolo same level. In postscript and dvi translation of the expression
. .Paolo (math mode) r_a - r_b subscripts a and b lay on different
. .Paolo lines, b being on the lower one.
. .
.
.Maybe you must to use \mathrm{} instead \textrm{} in math mode ...
thank you Osvaldo,
i had to use different types for a and b subscripts, to distiguish them from the
usual ones. I found that such result could be obtained by pressing alt-m-m within
the subscript prompt.
Now it seems that subscripts in the command string
\begin_inset Formula \( r_{\textrm{a}}-r_{\textrm{b}} \)
\end_inset
are not properly rendered, as they are in the more usual command
\begin_inset Formula \( r_{a}-r_{b} \)
\end_inset
Is there another way to change the character font family, in math mode?
thank you
Pol
--
Paolo Pumilia
email: [EMAIL PROTECTED]
o o o cstc o o o
Re: subscripts alignment
>From Osvaldo Fornaro, Wed Mar 29, at 16:01:
."Paolo M. Pumilia" wrote:
.> >From Jean-Marc Lasgouttes, Wed Mar 29, at 10:41:
.> .>>>>> "Paolo" == Paolo M Pumilia <[EMAIL PROTECTED]> writes:
.> .Paolo> I noticed that subscripts, in math mode, are not aligned at the
.> .Paolo> same level. In postscript and dvi translation of the expression
.> .Paolo> (math mode) r_a - r_b subscripts a and b lay on different
.> .Paolo> lines, b being on the lower one.
.> .
.
.Maybe you must to use \mathrm{} instead \textrm{} in math mode ...
thank you Osvaldo,
i had to use different types for a and b subscripts, to distiguish them from the
usual ones. I found that such result could be obtained by pressing alt-m-m within
the subscript prompt.
Now it seems that subscripts in the command string
\begin_inset Formula \( r_{\textrm{a}}-r_{\textrm{b}} \)
\end_inset
are not properly rendered, as they are in the more usual command
\begin_inset Formula \( r_{a}-r_{b} \)
\end_inset
Is there another way to change the character font family, in math mode?
thank you
Pol
--
Paolo Pumilia
email: [EMAIL PROTECTED]
o o o cstc o o o
Re: subscripts alignment
From Jean-Marc Lasgouttes, Wed Mar 29, at 10:41:
. "Paolo" == Paolo M Pumilia [EMAIL PROTECTED] writes:
.Paolo I noticed that subscripts, in math mode, are not aligned at the
.Paolo same level. In postscript and dvi translation of the expression
.Paolo (math mode) r_a - r_b subscripts a and b lay on different
.Paolo lines, b being on the lower one.
.
.I do not notice this... Or maybe your eyes are sharper than mine.
Difference in subscripts positions is evident. Maybe is due to my current
linux/debian setup:
% llpg tetex
ii tetex-base 1.0-6 basic teTeX library files
ii tetex-bin 1.0.6-1.1 teTeX binary files
ii tetex-dev 0.9-5 kpathsea.a and include files for teTeX
ii tetex-doc 1.0-6 teTeX documentation
ii tetex-extra 1.0-6 extra teTeX library files
ii tetex-lib 1.0.6-1 shared libkpathsea for teTeX
ii tetex-nonfree 1.0-5 non-free teTeX library files
here enclosed is a test lyx file together with its postscript conversion
your comments will be welcome
thank you
Pol
--
Paolo Pumilia
email: [EMAIL PROTECTED]
o o o cstc o o o
#This file was created by pol Wed Mar 29 12:03:57 2000
#LyX 1.0 (C) 1995-1999 Matthias Ettrich and the LyX Team
\lyxformat 2.15
\textclass article
\begin_preamble
\newcommand {\D}{\displaystyle}
\end_preamble
\language default
\inputencoding default
\fontscheme default
\graphics default
\paperfontsize default
\spacing single
\papersize Default
\paperpackage a4
\use_geometry 1
\use_amsmath 0
\paperorientation portrait
\leftmargin 1.5cm
\topmargin 1cm
\rightmargin 3cm
\bottommargin 1cm
\secnumdepth 3
\tocdepth 3
\paragraph_separation indent
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 1
\papersides 1
\paperpagestyle default
\layout Standard
\begin_inset Formula \( r_{\textrm{a}}-r_{\textrm{b}} \)
\end_inset
\the_end
test-1.ps.gz
Re: subscripts alignment
From Jean-Marc Lasgouttes, Wed Mar 29, at 10:41:
. "Paolo" == Paolo M Pumilia [EMAIL PROTECTED] writes:
.Paolo I noticed that subscripts, in math mode, are not aligned at the
.Paolo same level. In postscript and dvi translation of the expression
.Paolo (math mode) r_a - r_b subscripts a and b lay on different
.Paolo lines, b being on the lower one.
.
.I do not notice this... Or maybe your eyes are sharper than mine.
Difference in subscripts positions is evident. Maybe is due to my current
linux/debian setup:
% llpg tetex
ii tetex-base 1.0-6 basic teTeX library files
ii tetex-bin 1.0.6-1.1 teTeX binary files
ii tetex-dev 0.9-5 kpathsea.a and include files for teTeX
ii tetex-doc 1.0-6 teTeX documentation
ii tetex-extra 1.0-6 extra teTeX library files
ii tetex-lib 1.0.6-1 shared libkpathsea for teTeX
ii tetex-nonfree 1.0-5 non-free teTeX library files
here enclosed is a test lyx file together with its postscript conversion
your comments will be welcome
thank you
Pol
--
Paolo Pumilia
email: [EMAIL PROTECTED]
o o o cstc o o o
#This file was created by pol Wed Mar 29 12:03:57 2000
#LyX 1.0 (C) 1995-1999 Matthias Ettrich and the LyX Team
\lyxformat 2.15
\textclass article
\begin_preamble
\newcommand {\D}{\displaystyle}
\end_preamble
\language default
\inputencoding default
\fontscheme default
\graphics default
\paperfontsize default
\spacing single
\papersize Default
\paperpackage a4
\use_geometry 1
\use_amsmath 0
\paperorientation portrait
\leftmargin 1.5cm
\topmargin 1cm
\rightmargin 3cm
\bottommargin 1cm
\secnumdepth 3
\tocdepth 3
\paragraph_separation indent
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 1
\papersides 1
\paperpagestyle default
\layout Standard
\begin_inset Formula \( r_{\textrm{a}}-r_{\textrm{b}} \)
\end_inset
\the_end
test-1.ps.gz
Re: subscripts alignment
>From Jean-Marc Lasgouttes, Wed Mar 29, at 10:41:
.>>>>> "Paolo" == Paolo M Pumilia <[EMAIL PROTECTED]> writes:
.Paolo> I noticed that subscripts, in math mode, are not aligned at the
.Paolo> same level. In postscript and dvi translation of the expression
.Paolo> (math mode) r_a - r_b subscripts a and b lay on different
.Paolo> lines, b being on the lower one.
.
.I do not notice this... Or maybe your eyes are sharper than mine.
Difference in subscripts positions is evident. Maybe is due to my current
linux/debian setup:
% llpg tetex
ii tetex-base 1.0-6 basic teTeX library files
ii tetex-bin 1.0.6-1.1 teTeX binary files
ii tetex-dev 0.9-5 kpathsea.a and include files for teTeX
ii tetex-doc 1.0-6 teTeX documentation
ii tetex-extra 1.0-6 extra teTeX library files
ii tetex-lib 1.0.6-1 shared libkpathsea for teTeX
ii tetex-nonfree 1.0-5 non-free teTeX library files
here enclosed is a test lyx file together with its postscript conversion
your comments will be welcome
thank you
Pol
--
Paolo Pumilia
email: [EMAIL PROTECTED]
o o o cstc o o o
#This file was created by Wed Mar 29 12:03:57 2000
#LyX 1.0 (C) 1995-1999 Matthias Ettrich and the LyX Team
\lyxformat 2.15
\textclass article
\begin_preamble
\newcommand {\D}{\displaystyle}
\end_preamble
\language default
\inputencoding default
\fontscheme default
\graphics default
\paperfontsize default
\spacing single
\papersize Default
\paperpackage a4
\use_geometry 1
\use_amsmath 0
\paperorientation portrait
\leftmargin 1.5cm
\topmargin 1cm
\rightmargin 3cm
\bottommargin 1cm
\secnumdepth 3
\tocdepth 3
\paragraph_separation indent
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 1
\papersides 1
\paperpagestyle default
\layout Standard
\begin_inset Formula \( r_{\textrm{a}}-r_{\textrm{b}} \)
\end_inset
\the_end
test-1.ps.gz
subscripts alignment
I noticed that subscripts, in math mode, are not aligned at the same level. In postscript and dvi translation of the expression (math mode) r_a - r_b subscripts a and b lay on different lines, b being on the lower one. how to fix that ugly rendering? thank you for your help Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
subscripts alignment
I noticed that subscripts, in math mode, are not aligned at the same level. In postscript and dvi translation of the expression (math mode) r_a - r_b subscripts a and b lay on different lines, b being on the lower one. how to fix that ugly rendering? thank you for your help Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
subscripts alignment
I noticed that subscripts, in math mode, are not aligned at the same level. In postscript and dvi translation of the expression (math mode) r_a - r_b subscripts a and b lay on different lines, b being on the lower one. how to fix that ugly rendering? thank you for your help Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
How to import files in sgml format?
I would like to import files in sgml format. Altough sgmltools-2 and docbook have been installed, i can see no 'linuxdoc' or 'sgml' prompt within inport menu. Prompt for 'linuxDoc' format within export menu is whown, though, when sgml (linuxdoc article) class has been selected in my doc layout. What is missing in lyx setup? thank you for your help Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
How to import files in sgml format?
I would like to import files in sgml format. Altough sgmltools-2 and docbook have been installed, i can see no 'linuxdoc' or 'sgml' prompt within inport menu. Prompt for 'linuxDoc' format within export menu is whown, though, when sgml (linuxdoc article) class has been selected in my doc layout. What is missing in lyx setup? thank you for your help Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
How to import files in sgml format?
I would like to import files in sgml format. Altough sgmltools-2 and docbook have been installed, i can see no 'linuxdoc' or 'sgml' prompt within inport menu. Prompt for 'linuxDoc' format within export menu is whown, though, when sgml (linuxdoc article) class has been selected in my doc layout. What is missing in lyx setup? thank you for your help Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Changing Language
Hi, I have just tried to change language to a lyx doc that i have just written using default setup. It is a short text with title, author, abstract and standard headings. It cannot be converted into dvi, due to errors, both at the title section: The fisrt one is Missing \begin(document) 1.20 \ProvidesLanguage(i talian) Notice the word i-talian is broken. The second one: ! Undefined control sequence. I.20 \ProvidesLanguage(italian) The same happens if i choose 'english' as language: Missing \begin(document) 1.20 \ProvidesLanguage(e nglish) Notice the word e-nglish is broken. Such error does not arise when the default language is set. How to get over that problem? Thank you for your suggestions Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Changing Language
Hi, I have just tried to change language to a lyx doc that i have just written using default setup. It is a short text with title, author, abstract and standard headings. It cannot be converted into dvi, due to errors, both at the title section: The fisrt one is Missing \begin(document) 1.20 \ProvidesLanguage(i talian) Notice the word i-talian is broken. The second one: ! Undefined control sequence. I.20 \ProvidesLanguage(italian) The same happens if i choose 'english' as language: Missing \begin(document) 1.20 \ProvidesLanguage(e nglish) Notice the word e-nglish is broken. Such error does not arise when the default language is set. How to get over that problem? Thank you for your suggestions Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
Changing Language
Hi, I have just tried to change language to a lyx doc that i have just written using default setup. It is a short text with title, author, abstract and standard headings. It cannot be converted into dvi, due to errors, both at the title section: The fisrt one is Missing \begin(document) 1.20 \ProvidesLanguage(i talian) Notice the word i-talian is broken. The second one: ! Undefined control sequence. I.20 \ProvidesLanguage(italian) The same happens if i choose 'english' as language: Missing \begin(document) 1.20 \ProvidesLanguage(e nglish) Notice the word e-nglish is broken. Such error does not arise when the default language is set. How to get over that problem? Thank you for your suggestions Pol -- Paolo Pumilia email: [EMAIL PROTECTED] o o o cstc o o o
