There’s a 2003 ML500 with 191Kmi on it that came up on Facebook Marketplace
yesterday for $1700. Ad said that it runs and drives great!
Kevin in Hillsboro, OR
Sent from my iPhone
> On Aug 30, 2019, at 3:14 PM, Kaleb Striplin via Mercedes
> wrote:
>
> 98-99
>
> Sent from my iPhone
>
>> On
Attaboy!
Kevin in Hillsboro, OR
Sent from my iPhone
> On Aug 29, 2019, at 9:00 AM, Jim Cathey via Mercedes
> wrote:
>
> My son just replaced the radiator in the 1986 190D yesterday.
> Just under $200 from RockAuto. Nissens. Job was fairly straightforward.
>
> -- Jim
>
I love doing door checks too, so you’re outta luck! :) Anyone up for a valve
adjustment? injector replacement and return lines? Oil changes? Engine mount
replacement? AC fix/recharge? New tires? Also, what is the best approach for
crank (Armstrong) windows, maintenance/oiling to make them
I have done one valve adjustment sequence before on a 1981 300CD back in 2006.
Before I adjusted them, they were so far out of adjustment that the car
wouldn’t even start! Afterward, I was able to get it started. I know that this
240D is ready for one!!
Kevin in Hillsboro, OR
1982 240D 191Kmi,
Attaboy! How many KW is it? A couple years ago, I bought a Westinghouse 9500KW
gas generator after we lost power for nearly a day after the big 1’+ snowstorm
(western Oregon Standards), and it has sat idle waiting for the next one. I’ve
exercised it a few times, and it’s ready to go for this
...Of this 1982 240D. It has the usual issues like non-working A/C, vacuum door
lock issues, bad door check straps, cracking MB-Tex on the driver’s seat, but
it runs OK! I’m sure it’ll run much better once I adjust the valves and check
the adjustment of the throttle linkages which are probably
Will these wheels and tires fit my 1980 to 240 D?
Kevin and Hillsboro, Oregon
1982 240D 191Kmi, Hildegard who has beaten up bunts with curb rash and rust
https://portland.craigslist.org/wsc/wto/d/beaverton-1989-mercedes-benz-560sec-15/6959351112.html
Sent from my iPhone
.
>>>
>>> The advantage you have here in a 240D is very easy to work on and
>>> everything is accessible. Flush the system well with clean water. I
>>> usually disconnect the hose off the back of the cylinder head and
>> connect a
>>> garden hose ru
For Bob:
I hope your cancer treatment goes well. It’s good that the cancer was detected
in the early stages!
About the disappearing W123 cars, It’s all the more reason for me to keep this
1982 W123 240D on the road!!! I’ve ridden in it two times with two different
drivers since the original
Hello again.
I decided to “blindly” plunge into the cooling system, removed the radiator cap
and filled it. Afterward, I remembered the procedure of filling through the top
hose, so I removed it, topped off the system, reinstalled it, tightened the
clamp and fired it up. Nothing was leaking, so
Today, I started the process of adjusting the valves on my 1982 240D. When I
did the last one, 1981 300CD over 10 years ago, my Dad did most of the r of
the valve cover and linkages/vacuum lines. This one is all on me, and I hope I
can get it back together tomorrow or Monday. I know that the
Attaboy!
Kevin in Hillsboro, OR
1982 240D 191Kmi, Hildegard
Sent from my iPhone
> On Sep 15, 2019, at 2:36 PM, Kaleb C. Striplin via Mercedes
> wrote:
>
> I pulled the drive shaft on the 98 E300 to cure the increasingly worse
> vibration when taking off from a start, which I assumed was the
Jalopies and joe? I would bring my 240D and drink to that!!
Kevin in Hillsboro, Oregon
1982 240D 191Kmi, Hildegard
Sent from my iPhone
> On Sep 9, 2019, at 6:19 AM, Floyd Thursby via Mercedes
> wrote:
>
> I just take mine and park them in among the Ferraris and Lambos and whatnot
> that the
Why didn’t they just use a chain? Oh yeah, a belt is cheaper, GM penny
pinching, and the original owner probably won’t keep it that long anyway.
Kevin in Hillsboro, OR
1982 240D 191Kmi, Hildegard
Sent from my iPhone
> On Sep 9, 2019, at 11:13 AM, Mitch Haley via Mercedes
> wrote:
>
> A wet
With this 1982 240D. I was feeling around under the hood and discovered that
there is no AC compressor which isn’t the worst of it. THERE IS NO COOLANT
WHATSOEVER IN THE RADIATOR! I know that most of these are neglected, but
who knows how long it’s been running dry. I really don’t want to
I got the valve adjustment done and the cover back on. The engine sounds much
quieter! Most exhaust valves were WAAY loose, nearly 1.5x the amount of
clearance! Intake valves were pretty good, and none were excessively tight. The
air filter housing had the wrong mounts, one of which had
191Kmi, Hildegard did
Sent from my iPhone
> On Sep 17, 2019, at 6:01 PM, Craig via Mercedes wrote:
>
> On Tue, 17 Sep 2019 15:26:11 -0700 Kevin Kraly via Mercedes
> wrote:
>
>> Are washers required under the air filter housing mounting nuts?
>
> Yes. They ar
> On Tue, Sep 17, 2019 at 2:54 PM Kevin Kraly via Mercedes <
> mercedes@okiebenz.com> wrote:
>
>> The whole thing is like figuring out a puzzle since I don’t have
>> the luxury of consulting a manual, lots of trial and error. I still have a
>> piece that mounts to t
I wonder what they think of having new injectors pop tested and matched to
within 5 bar?
Kevin and hillsboro, Oregon
Sent from my iPhone
> On Jul 26, 2019, at 8:19 PM, Craig via Mercedes wrote:
>
> On Fri, 26 Jul 2019 18:55:27 -0700 Karl Wittnebel via Mercedes
> wrote:
>
>> Yah some dude
It would be nice to install a TDI in my nephew’s little 1960 Nash Metropolitan!!
Kevin in Hillsboro, OR
Sent from my iPhone
> On Jul 17, 2019, at 6:17 PM, Curt Raymond via Mercedes
> wrote:
>
> Just because its sideways mounted in a VW doesn't mean it can't be inline
> elsewhere. In fact
The Finny project seemed like quite a fun and rewarding project! It was quite
enjoyable to follow along as it progressed. How much would you value your total
with purchase price, parts and time to improve it to present condition? I get
the same enjoyment in my RC car hobby with building up
Thanks, I needed that! I remember that from the Dr. Demento radio show.
Kevin in Hillsboro, Oregon
Sent from my iPhone
> On Jul 26, 2019, at 5:43 AM, Mitch Haley via Mercedes
> wrote:
>
>
>> On July 25, 2019 at 11:19 PM Clay Monroe via Mercedes
>> wrote:
>>
>>
>> GNW fails to allow for
Hammer price $13250! Wow!! I have 12.5% of that money in my 1982 240D with
just under 6x the miles! I need to install an AC compressor in mine as well.
Bonus: I was checking out the trunk and came across some new brake pads and a
set of engine mounts brand new in the package! I knew that it
I don’t know ‘Mogs, but a 1990 with 8K miles and 352hrs on the engine seems a
steal for $10K!
https://portland.craigslist.org/grg/cto/d/underwood-unimog/6981812085.html
Kevin in Hillsboro, OR
1982 240D 191Kmi, Hildegard
Sent from my iPhone
___
Thanks, Curley, for the info. As I was reading through it and other
transmission related stuff online, I got to thinking. This 1982 240D seems to
be behaving as if the transmission isn’t getting any vacuum supply. I haven’t
gotten underneath to confirm, but I believe that the mystery
My ‘82 has the VCV on the IP.
Kevin and Hillsboro, Oregon
1982 240D 191Kmi, Hildegard
Sent from my iPhone
> On Sep 19, 2019, at 5:43 PM, Curley McLain via Mercedes
> wrote:
>
> vcv on my 81 is on top of the valve cover. Get the diagram from FSM Or from
> Sunvalley. Different trans from a
We took Hildegard out for a test drive today, and she seems to be running
better since the valve adjustment. The shift points seem to occur at specific
speed and engine RPM rather than throttle positions. All vac lines leading
inside the car are disconnected and capped, but all of the lines
Today, my nephew and I set off in Hildegard to fill her up with Diesel and take
a drive to pick up some wings for dinner. The fuel sender actually works!
However, the odometer does not, so who knows how many hundreds of thousands of
miles are on her? I’m a little unsure if the moderate blow by
No, I’m not in the market for a W124, but why so cheap?
Kevin in Hillsboro, OR
1982 240D 191Kmi, Hildegard
https://portland.craigslist.org/mlt/pts/d/gresham-1987-mercedes-300d/6988549128.html
Sent from my iPhone
___
http://www.okiebenz.com
To search list
Hi, Craig and Jaime. The horsehair strips did, in fact, slide out of their
pleats toward the rear of the seat. I found a strip under the seat when I
pulled it out. How do you slide them back into place? Is there a proper way to
remove the hog rings so that I can separate the cover completely
What do you guys think of this one?
Kevin in Hillsboro, OR
1982 240D, High Mileage Hildegard
https://salem.craigslist.org/cto/d/saint-benedict-1985-mercedes-benz-300cd/6989321799.html
Sent from my iPhone
___
http://www.okiebenz.com
To search list archives
Welcome back to the Diesel family!
Kevin in Hillsboro, OR
1982 240D 191Kmi, Hildegard
Sent from my iPhone
> On Sep 27, 2019, at 12:58 PM, Donald Snook via Mercedes
> wrote:
>
> Thanks! I can smell the diesel from here!
>
> Donald H. Snook
>
>
>> On Sep 27, 2019, at 2:52 PM, Dwight Giles
Yes, Mitch. It shifts just how you describe with a non-working modulator or no
vac signal. When it’s floored, shifts are near redline and smooth, but very
firm if not floored. The PB booster works very well as does the shutoff. All
lines to the lock circuit have been capped. I’ll have to do
Congrats on the new acquisition! With the rather high miles, it has most likely
had great care to get it there!
Kevin in Hillsboro, OR
1982 240D 191Kmi, Hildegard
Sent from my iPhone
> On Sep 27, 2019, at 5:59 PM, Dan Penoff via Mercedes
> wrote:
>
> You do. Come get it. Soon. I can’t store
As I read Donald’s post about the pleats on the seat bottom and back not
matching, I figured I would ask about the back seat pleats in my 240D. There
are quite a few that have flattened out. Otherwise the seat pad seems to be in
good shape. Is there a way to refresh the padding within the
I had a similar experience replacing brake pads on my niece’s 1993 Honda Del
Sol. It had the same caliper pucks which I was able to turn with a c clamp
biting on the notches on the puck. Without the dragging rear brake, you should
be able to hit 60mpg!
Sent from my iPhone
> On Nov 4, 2019, at
A previous owner of my 1982 240D made the decision for me since that shrunken
vinyl window trim is already gone.
Kevin in Hillsboro, OR
1982 240D, High Mileage Hildegard
Sent from my iPhone
> On Nov 7, 2019, at 11:00 AM, Andrew Strasfogel via Mercedes
> wrote:
>
> I wonder if it would make
At minimum, that’s correct. The Ody did the job with 4 adults, two kids in car
seats and two 80LB service dogs, but my big Goldendoodle pup will be much
larger at over 100LBs which wouldn’t leave much room for me in the back. The
Sprinter can be configured with as many seats as necessary or
Hi, Craig. Are you saying that this guy, based on his experience with his
Sprinter, felt that it wasn’t very reliable, and couldn’t trust them for his
fleet? I’ve red about Transit van problems as well like being rust prone, poor
fit and finish, driveshaft carrier bearing issues, and oil
Cool beans!
Kevin in Hillsboro, OR
2019 Sprinter 82 miles, Der Doodlewagen
1982 240D, High Mileage Hildegard
Sent from my iPhone
> On Dec 9, 2019, at 11:27 AM, Andrew Strasfogel via Mercedes
> wrote:
>
> BUSINESSFord to make car parts out of McDonald's coffee bean skins
>
> Published:
Congratulations on the new wagon!
Kevin in Hillsboro, Oregon
2019 sprinter van 110 miles, Der Doodlewagen, currently in for running boards
and assist handle installation
1982 240D high mileage Hildegard almost ready for engine mounts, diesel purge
and an oil change
PS. It’s been so long since
There is a BIG, brand new Mercedes Sprinter in the driveway! It is the 144”WB
12 passenger model with nearly every option but 4Matic, graphite gray with
black interior and MB-Tex seats. It had 6 whole miles on it before the 30 mile
trip home. The just over $50K loaded Honda Odyssey is so much
king a small
> school bus would not be easy.
>
> Randy
>
>
>> On 06/12/2019 10:14 AM, Max Dillon via Mercedes wrote:
>> Wow, that sounds awesome!
>>
>> Max Dillon
>> Charleston SC
>>
>> Dec 5, 2019 11:17:25 PM Kevin Kraly via Mercedes
https://www.facebook.com/marketplace/item/416618315901642/
Sent from my iPhone
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
The automatic pool cleaners are great! We have a Hayward Tigershark robotic
pool cleaner. When it is done, all I have to do is rinse out the filters,
reinstall them and it’s ready for another round. This pool has an electro
hydraulic system to roll the cover in and back out when swimming is
I also live in an HOA. In the beginning, I wasn’t too happy that the then HOA
president was against the design of our patio/deck cover and structure. It goes
the entire length of the back of the house and out 15 feet, and is covered with
corrugated smoked panels so that light can get through.
Yeah, I’ve never understood why a Japanese branded pickup was named after a
Western Washington city other than Toyota and Tacoma both have 3 syllables. And
they left the U out of TRD.
Kevin in Hillsboro, .OR
1982 240D High Mileage Hildegard
Sent from my iPhone
> On Oct 15, 2019, at 8:29 AM,
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
https://portland.craigslist.org/mlt/cto/d/portland-1982-mercedes-240d-manual/7002255460.html
Sent from my iPhone
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
The sh***d has hit the fan on on the 1982 240D the other day, so I’m in need of
a shroud. I sourced one from a W123 300D and plan to buy it if it will fit my
car. I was surprised that the fan could hit the shroud. I know that the engine
mounts are in need of replacement. Could this cause the
gt;> On Thu, Oct 17, 2019 at 6:43 PM Jaime Kopchinski wrote:
>>
>> I believe the 240D fans shrouds are deeper than the 300D.
>>
>> It’s possible cracked at the mounting tab at the bottom, or came loose.
>> Failed motor mounts doesn’t help either!
>>
>>
Our 2006 Sprinter had a towing capacity of 5000LBS. The boat in tow was our
personal boat, a Tracker Party Deck 21 I/O which was near the 5000LB towing
capacity. The dragon boats were between 600 and 900LBs each, and with 4 on the
club trailer, the Ram 2500 Cummins was definitely up to the task
What kind of smoker do you have, and are you smoking turkeys?
Kevin in Hillsboro, OR
1982 240D, High Mileage Hildegard
Sent from my iPhone
> On Nov 28, 2019, at 8:58 AM, Dan Penoff via Mercedes
> wrote:
>
> I do. Understand that the area I live in was empty farm and grove land 20
> years
Attaboy!!!
Kevin
1982 240D High Mileage Hildegard
Sent from my iPhone
> On Oct 9, 2019, at 4:19 PM, Floyd Thursby via Mercedes
> wrote:
>
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change
What are Fuchs Bundts like compared to stock MB? I want to replace the dirty,
resting, and flaking bundt wheels on my 82 240D. How much do you want for them?
Kevin Currently in Palm Springs, Springs,currently in Palm Springs, California
Sent from my iPhone
> On Oct 8, 2019, at 4:59 AM, Karl
My 82 has crank (Armstrong) windows and a solid steel roof with no leaky hole
which Wilton would approve. for HVAC control, it has two knobs, two sliders,
and a wheel. The AC compressor has been removed. It doesn’t look like all of
the hoses are there which means that the system has been open
issing, and then test the system. Not a cheap proposition either way.
>
> Maybe a used compressor could be procured for the test?
> --
> Max Dillon
> Charleston SC
>
>> On October 8, 2019 6:31:09 PM EDT, Kevin Kraly via Mercedes
>> wrote:
>> M
https://palmsprings.craigslist.org/cto/d/palm-springs-1995-mercedes-benz-320/6993394560.html
Sent from my iPhone
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
Here’s that W115 300D ad on my local Craigslist for 1800. It seems rather
neglected per the description, but it still runs and drives for under $2K.
Kevin in Hillsboro, OR
1982 240D, High Mileage Hildegard
My Uncle Al’s W115 1976 300D was the car that gave me the Dieselitis bug that
will be with me until my dying day. They are getting very hard to find in any
condition, especially those that are drivable. There is one up in WA on
Craigslist. I’ll post a link to the ad if I can find it.
Kevin in
Hello Dieselers. As I mentioned a couple days ago, I’m considering a Sprinter
van to replace the 2017 Honda Odyssey as the family/K9 hauler. Our three Doodle
puppies are growing larger, and we are also having two more Goldendoodles
raised to be our next guide dogs. In just over a year, we will
I don’t smoke, and I wouldn’t want to lick the engine in my 240D since it’s
oily!!! OTOH, if you have a taste for oil, I need my engine cleaned!
I’m going to finish the engine mounts today since I now have a u-joint
extension for easier accessibility of the top bolts.
Kevin in Hillsboro, OR
2019
Attaboy once again!!!
Kevin in Hillsboro, OR
2019 Sprinter 330 miles, Low Mileage Lutgard
1982 240D, High Mileage Hildegard still waiting for engine mount replacement
time
Sent from my iPhone
> On Feb 1, 2020, at 4:55 PM, Curley McLain via Mercedes
> wrote:
>
> I also replaced soft the tri
Hello everyone.
I decided to tackle the engine mounts on Hildegard. It took a bit of persuasion
to get the passenger’s side lower bolt loose, but after a little “rattle
wrench” action and some more ratcheting, it broke loose! Then, I was able to
jack up the engine and remove the heat shields
Hello listers. I’ve spent about 5 hours working on this tired 240D. It has oil
leaking from the rear main seal, and the valve cover and oil separator have
been blowing oil all over the engine! I did replace the VC gasket when I did
the valve adjustment. The major situation is that the
ternal nut/bolt extractors that work really well for axle bolts
> that some dork has coated with loktite.
> https://www.irwin.com/tools/browse/screw-bolt-extractors/bolt-extractors
>
> BTDT.
>> Kevin Kraly via Mercedes <mailto:mercedes@okiebenz.com>
>> February 6,
Attaboy! That is so nice to hear when a good, old Mercedes can be saved. I’ve
got Hildegard up on ramps and ready to do the engine mounts. I’m planning to do
the fan shroud replacement afterward since I won’t have to worry about fan
blade clearance when I jack up the engine without the shroud
Doing elbow grease on these old Mercedes is kind of like going to the gym!
Sent from my iPhone
> On Feb 16, 2020, at 12:05 PM, Floyd Thursby via Mercedes
> wrote:
>
> https://www.facebook.com/marketplace/item/535075387430149/
>
> 1995 Mercedes-Benz S-Class S 500 Coupe 2D
>
>
> --
> --FT
Congratulations and attaboy!!
Kevin in Hillsboro, Oregon
2019 Sprinter 470 miles, Low Mileage Lutgard AKA Der DoodleWagen
1982 240D, High Mileage Hildegard, Im Laden
Sent from my iPhone
> On Feb 22, 2020, at 5:21 PM, Curley McLain via Mercedes
> wrote:
>
> Thanks Dan,
>
> Your clue about
What do you think of this W116 300SD? Should I add this one to the fleet?
Kevin in Hillsboro, OR
2019 Sprinter 336 miles, Low Mileage Lutgard AKA Der DoodleWagen
1982 240D, High Mileage Hildegard
https://portland.craigslist.org/mlt/cto/d/portland-1980-mercedes-300sd-turbo/7075623804.html
Sent
I’ve decided to take the leap and have a 111K mile engine installed into
Hildegard. My indy shop found it in Cali, and it should be arriving by the
middle of next week. The old engine was leaking from the front and rear seals,
and blowing it out the oil separator. Rather than throwing easily
ot!
>
> buy only IF you want to deal with the evil crypsler ACC
>
>> Kevin Kraly via Mercedes <mailto:mercedes@okiebenz.com>
>> February 14, 2020 at 11:40 PM
>> What do you think of this W116 300SD? Should I add this one to the fleet?
>> Kevin in Hillsboro,
It sounds like they paid about $800 too much!
Kevin in Hillsboro, OR
2019 Sprinter 336 miles, Low Mileage Lutgard AKA Der DoodleWagen
1982 240D, High Mileage Hildegard waiting for her new power plant
Sent from my iPhone
> On Feb 15, 2020, at 4:06 PM, Kaleb Striplin via Mercedes
> wrote:
>
>
Clay,
What sort of Doodle is it, Labradoodle, Goldendoodle, Britneydoodle or??
Doodles make wonderful guide dogs, at least the two Labradoodles that we have
had so far. The two Doodles in training to be our next guide dogs are
Goldendoodles. The pet Doodles do like to bark at any activity
1995 SL600 with 158K miles, how long do you think it’ll last?
https://www.facebook.com/marketplace/item/2910930995605221/
Kevin in Hillsboro, OR
2019 Sprinter 330 miles, Low Mileage Lutgard
1982 240D, High Mileage Hildegard
Sent from my iPhone
___
o for one of these things. I couldn't see it at $60k though.
>>
>> --FT
>>
>>> On 12/28/19 1:31 PM, Max Dillon via Mercedes wrote:
>>> Wow, one wonders if Sprinter sales could be much stronger with proper
>>> advertising.
>>>
>>> Ma
We put the Doodle puppies to bed at around 10:00, their normal time, and went
to bed ourselves only to be awakened at midnight by the neighbors’ DIY
fireworks displays. Happy New Year, and may the Mercedeseses keep running and
running and...
Kevin in Hillsboro, OR
2019 Sprinter 192 miles, Low
I’ve always wanted a nice W115, and they seem to be getting quite rare these
days.
https://www.facebook.com/marketplace/item/581993942623256/
What do y’all think of this car?
Kevin in Hillsboro, OR
2019 Sprinter 192 miles, Low Mileage Lutgard
1982 240D, High Mileage Hildegard
Sent from my
I had two of those Chamberlain garage door openers installed a couple years
ago. What bridge would I need to purchase, and how easy is it to set up? I have
already downloaded the Myq app to my phone.
Kevin in Hillsboro, OR
2019 Sprinter Passenger 144WB 133 miles, Der Doodlewagen
1982 240D High
My 2019 Sprinter and the local inventory were all German built in Dusseldorf
(vins starting with WDZ...).
Kevin in Hillsboro, OR
2019 Sprinter 192 miles, Der Doodlewagen
1982 240D High Mileage Hildegard
Sent from my iPhone
> On Dec 26, 2019, at 12:22 PM, Floyd Thursby via Mercedes
> wrote:
Since the 240D is High Mileage Hildegard, the Sprinter has now been dubbed Low
Mileage Lutgard AKA Der Doodlewagen.
Sent from my iPhone
> On Dec 26, 2019, at 1:27 PM, Floyd Thursby via Mercedes
> wrote:
>
> I don't know about tours at Vulvo or Sprinterland, but the BMW factory in
> Greer
Anyone up for a Mog project??
https://portland.craigslist.org/grg/clt/d/husum-1963-mercedes-unimog-404/7045315127.html
Kevin in Hillsboro, OR
2019 Sprinter 192 miles, Low Mileage Lutgard
1982 240D, High Mileage Hildegard
Sent from my iPhone
___
That little SUV is nearly the price of my well-equipped Sprinter! MSRP was 63K,
and could be had with a few more options fully decked out at 66K. 4Matic adds
$9K on top of that. I’m glad that I got the Diesel with 190HP and 325LB/Ft
torque compared to that same 4 cylinder gasser. If it’s not
My first set of handle driver Allen wrenches was Wiha, or as the hobby shop
owner called them, W HAA! They had very comfortable handles with a
top knob that went into your palm that would turn as the tool was twisted in
your fingers. I hope you get my explanation. At the time (early
Attaboy!!
Kevin in Hillsboro, Oregon
2019 Sprinter 750 miles, Low Mileage Lutgard AKA Der DoodleWagen
1982 240D, High Mileage Hildegard, no news yet
Sent from my iPhone
> On Apr 20, 2020, at 4:59 AM, Dan Penoff via Mercedes
> wrote:
>
> Success! At least partially.
>
> I ran the offending
This is the cheapest price I’ve seen on one of these.
Kevin in Hillsboro, Oregon
2019 Sprinter 685 miles, Low MIleage Lutgard AKA Der DoodleWagen
1982 240D, High Mileage Hildegard
https://portland.craigslist.org/mlt/cto/d/happy-valley-2007-mercedes-benz-ml-320/7110822876.html
Sent from my iPhone
Yes it is. You should try it, if you can find some available.
Kevin in Hillsboro, OR
2019 Sprinter 600 miles, Low Mileage Lutgard AKA Der DoodleWagen
1982 240D, High Mileage Hildegard still under general anesthesia
Sent from my iPhone
> On Mar 13, 2020, at 9:07 AM, Andrew Strasfogel via
What a cat! I hope she lives a little longer.
Kevin in Hillsboro, OR
2019 Sprinter 650 miles, Low MIleage Lutgard AKA Der DoodleWagen
1982 240D, High Mileage Hildegard
Sent from my iPhone
> On Apr 2, 2020, at 5:25 PM, Dan Penoff via Mercedes
> wrote:
>
> I’ve mentioned that Kitty has
I have a couple of different kinds of shelving for my RC cars and supplies. I
started out with the 24”x36”x72 plastic kind with four poles that fit into the
shelf below and support the shelves above. The type that I prefer are the metal
ones that can be put on feet or on wheels. The shelves fit
I sure did enjoy the 1958 Volvo PV444 that we had in the 1990’s. It was a
mostly original driver quality car, but still a head turner. Someone re-powered
it with a B18 engine which was more powerful than the original B16. During the
move from California to Oregon, the moving company damaged it,
If that was in my area, I WOULD BE ALL OVER IT!!! The ones around here are
priced much higher when one does come up for sale. I hope mine is released from
captivity soon.
Kevin in Hillsboro, OR
2019 Sprinter 650 miles, Low Mileage Lutgard AKA Der DoodleWagen
1982 240D, High Mileage Hildegard, in
That was very interesting! Do I have permission to share this information?
Kevin in Hillsboro, OR
2019 Sprinter 650 miles, Low MIleage Lutgard AKA Der DoodleWagen
1982 240D, High Mileage Hildegard, still in the shop
Sent from my iPhone
> On Apr 2, 2020, at 7:48 AM, Floyd Thursby via Mercedes
>
Winner winner chicken dinner!
Kevin in Hillsboro, Oregon
2019 sprinter 750 miles, low mileage Lutgard
1982 240D, hi mileage Hildegard
Sent from my iPhone
> On Apr 30, 2020, at 2:00 PM, Floyd Thursby via Mercedes
> wrote:
>
> I did the most simple thing to try to get this ML500 started.
Sounds like you got an awesome deal on that E420! A used car of any era with
EVERYTHING working is a rarity, let alone one that is 25 years old! I finally
got some news on my 1982 240D that’s been in the shop since February. They are
wrapping things up, and it COULD be ready by the end of the
t
> beat me to it.
>
> Sounds like the 240D is just about ready to go. How much longer before you
> move out to the new digs?
>
> -D
>
>> On Apr 29, 2020, at 5:11 PM, Kevin Kraly via Mercedes
>> wrote:
>>
>> Sounds like you got an awesome deal on that E420! A us
I spotted this on facebook today.
https://www.facebook.com/marketplace/item/799942663876364/
Kevin in Hillsboro, OR
2019 Sprinter 750 miles, Low Mileage Lutgard
1982 240D, High Mileage Hildegard
Sent from my iPhone
___
http://www.okiebenz.com
To search list
We have a Bonsaii EverShred C149-C 18 sheet crosscut shredder that has been
working very well since August of 2016. It has a fan and a 30 or 40 minute
continuous shred rating. The only problem it has is that it will stay on even
if there is nothing in the slot to be taken in to shred. To stop
Congratulations on your new acquisition! It sounds like it will be a fun one!
Kevin in Hillsboro, OR
2019 Sprinter 750 miles, Low Mileage Lutgard AKA Der DoodleWagen
1982 240D, High Mileage Hildegard, new news yet
Sent from my iPhone
> On Apr 24, 2020, at 1:40 PM, Dan Penoff via Mercedes
>
I had the hood up on the Sprinter today. It also has plastic covers of various
sizes and shapes, under which I’m sure lies a 3.0l V6 Diesel engine. Everyone
who has driven her says that she is very easy to drive and does very well on
the road. My niece said that the cabin is designed much more
Congratulations on your new baby! I hope it runs forever.
Kevin in Hillsboro, OR
2019 Sprinter 12 passenger 144”WB, 750 miles, Low Mileage Lutgard
1982 240D, High Mileage Hildegard with the low mileage engine, not finished yet
Sent from my iPhone
> On May 11, 2020, at 3:45 AM, Andrew Strasfogel
201 - 300 of 494 matches
Mail list logo
