Yep, let the town settle it... should not be too hard unless you live in the
country so far out nobody cares...
If there are actually ~dozen people living there, then they are almost
certainly in violation of some health department code. If they are using a
septic system, you can guarantee
From: Curley McLain <126die...@gmail.com>
>I want my bummerfone! I want free housing and a free car and free car
>insurance and free benzine and free gas an free 'lektrik. an free
>insulation an..
Summer camp this year, kid shows up with two Iphone 6 whatevers... he's 11 ...
he
Just curious, you had the pump replaced.. there was a big flap years ago about
some pumps not doing the job. They were just designed wrong, and I believe
they were aftermarket pumps. The true blue honest to goodness MB pumps were
typically priced under them as I recall, but for some reason
It's been my experience ( which may or may not relate here ) that running an
engine very low on oil will damage both the rings and the bearings.
However, carrying this process to it's termination in a non catastrophic manner
results in an engine that will not start.
Kleb's engine starts
All the doctors and insurance folks drive them ,,,
On Tuesday, April 8, 2014 8:56 PM, Dwight Giles dwight.gi...@gmail.com wrote:
Whete does driving a Mercedes fit in this scheme?
___
http://www.okiebenz.com
To search list archives
I've heard of small time clinics and questionable doctors turning away
medicare, but they are in the very small minority. Almost all reputable
healthcare providers are fine with medicare.
I am surprised at the level of premium disparity between medicare and
obamacare. I've paid something
So you think it's all the Republican's fault. Same document, different
administration??
Let me give you some clear advice. Republican/Democrat/Libertarian/Whatever..
they're all the same. Corrupt when they pass thru that magic barrier that
surrounds the district. It seems to swallow them
If you're a common folk who makes over 60K or so, and are under 65 yrs old, and
not covered by insurance, POTUS has made it such that you are going to get
shafted.
For the first years you can take the hit on income tax, fines for not
purchasing a product ( a first, in my opinion ) and that hit
I cannot imaging guessing at this issue without pulling a bearing cap and
actually getting real data. It's only two bolts once you get the pan off.
Easy peasy.
Don't guess, get data.
PS, you'll know as soon as you pull it. the babbet will be worn visibly. You
don't have to mike it. If
A power steering pump low on oil will howl. I bet the hydraulic suspension
pump will howl too.
On Saturday, April 5, 2014 11:02 PM, Andrew Strasfogel astrasfo...@gmail.com
wrote:
It also emits quite a howl when decelerating down to 1800rpm.
On Sat, Apr 5, 2014 at 10:06 PM, Jim Cathey
, Richard Hattaway rhatta...@rocketmail.com
wrote:
Total billing to me, inclusive of dr, er, hospital. Total bill to
insurance was much higher. Large part of total bill to insurance 'written
off' because of previous negotiated rates. I think it's all a game. Just
too bad that those who
Thinking of Randy's concern about plastic in the house, and remembering when
the class action lawsuit forced a vendor to replumb my lake house... the one
Dan remembers...
Plastic is not forever...
On Friday, April 4, 2014 12:34 PM, Randy Bennell rbenn...@bennell.ca wrote:
On 04/04/2014
The chronic poor have a good go at cheap healthcare, as they cannot get blood
from a turnip, as you mention. Personal experience, in an ER while my son was
having a toe sewn back on ( too many beers, rough deck on the beach house ),
was a woman there who was sick, and needed help. She was not
fit, IMO.
On Monday, March 31, 2014 8:27 PM, Mitch Haley m...@voyager.net wrote:
Richard Hattaway wrote:
Not had this happen to us. Recent ( 2012 ) trip to ER, then 3 days hospital
stay, wife's heart attack, and my total bill was something under $1000. Not
bad, IMO.
Total bill, or total
Check the pot for heroin residue (c:
On Thursday, April 3, 2014 6:47 PM, WILTON wilt...@nc.rr.com wrote:
A little while ago, SWMBO brought home a beautiful glazed clay pot for a small
maple tree on our side terrace/patio. 'Couldn't help but wonder if I might
have stirred up some of the clay
I wish I had a clear tittle. They're good to whittle.
On Sunday, March 30, 2014 11:48 PM, Mitchell Haley, EA m...@voyager.net
wrote:
Priced at ten Klebs:
http://grandrapids.craigslist.org/cto/4372227621.html
___
http://www.okiebenz.com
To search list
Not had this happen to us. Recent ( 2012 ) trip to ER, then 3 days hospital
stay, wife's heart attack, and my total bill was something under $1000. Not
bad, IMO.
I've never seen so many folks in a trauma room ( curtain/cube ) in my life.
There had to be 10 folks in there, and they were
I have to disagree with pulling the crank and having it ground. Two
reasons..First off, it's probably fine. Put a micrometer on it and see. I've
been in a few engines, and not found one yet that had a bad crank. You'll find
the bearings are bad. Worn. The crank almost never fails. So you
Jim's method is cool. No power loss to radios that remember, too (c: ...
If one does not have a multimeter.. same trick can be done ( I like the 'post
slide idea' ) using a parking lamp. It will glow a deep dull red at around 50
mA, or .05 Amp. Testing in a shaded area is suggested. A good
Well, they're vastly outnumbered by the people who are not individuals.
Best,
-Tim
ROFLMAO... ( ps, is that ok, PC wise ?? )
On Friday, March 28, 2014 2:10 PM, Tim Crone bb...@crone.us wrote:
On Thu, Mar 27, 2014 at 9:28 PM, Richard Hattaway
rhatta...@rocketmail.comwrote
Wow that's a big place.. and only two entrances. I bet the traffic at shift
change can be challenging. However, I think I saw in the wiki article that the
median age is in the 60's ..
70% of the people were over 45. So maybe not so crowded at the gate (c:
There were 2,355 households out
Well, was that a requested sermon?
Exactly who is going to report me, and what would be the benefit??
Does OzBenz punish me, or is that left to someone else??
Richard
Smiles, knowing he's doing his best to keep the list from becoming barren and
soulless.
On Thursday, March 27, 2014 8:17
Not a real problem to have a controlled burn in an area like that. We had one
last year. I was super impressed. The NC Forestry Service pulled it off, had
a whole bunch of guys in yellow suits and stuff, and trucks everywhere, and one
big yellow helicopter. The helicopter shot fire balls,
I'll elaborate although I did not read or see the first post...
I've had great luck with data recovery using only a simple USB adapter that's
available from many different computer outlets.. You plug it into the drive in
question ( removed from the computer, obviously ) and into a USB port on
Ahhh, so the Hate Gary club has now evolved to three people??
Based on my term of existence on this list, and the order of growth of the
club, we now have somewhere around 43 million years to go before everybody
hates Gary.
Except I will never be a member.. thus foiling your otherwise well
My recollection is that water will dissolve shellac.
Not too sure about this, but if it does, it's slow. Potters use shellac to
draw designs on green pots, then wash with water for relief texture.
Of course they then put em in kilns at 2200F or so.. and that works just fine
to 'disolve'
Ritter list now, I guess. Does this thing still exist? Is Hank still there??
Curious minds want to know.. and they want the URL for it.
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery
I agree, don't do it. Regular masonry mortar is a better bet, cause it has
more sand and such in it, and is designed to fill larger gaps than thinset.
I guess you could go get some sand and mix it in the thinset to produce a
masonry mortar of types, but I'd only do that in a real unusual
I'm up for a CarolinaQ anytime anybody wants to get together.
I'm west of Denton. Little berg in the country known as Pooletown.
On Saturday, February 15, 2014 7:40 AM, Tim Crone bb...@crone.us wrote:
On Feb 15, 2014 7:04 AM, Dan Penoff d...@penoff.com wrote:
I was thinking that Wilton
Walt and I for starters (-:
On Friday, February 14, 2014 6:38 PM, Dan Penoff d...@penoff.com wrote:
Local news I found interesting. Doesn't someone live in/around Greensboro?
I have a pile of the off lime green and also grey service manuals. They are on
their way to ebay.
I wanted to check here. Name your price. What do I want for them?? oh, maybe
$200 each. (c: But I am open to offers, so seriously, name your price.
I will be shipping them in the medium USPS
Someone told me there's a $5000 car available here. Is there any way I can get
in on the action??
On Monday, February 3, 2014 9:07 AM, Dan Penoff d...@penoff.com wrote:
With the deluge of responses (I got four more this morning) I'm wondering how
much money I've left on the table
Why would I want to buy it now when I can get it out of repo for half ?? (c:
On Sunday, February 2, 2014 8:16 PM, Mountain Man maontin@gmail.com wrote:
Dieselhead wrote:
If anyone is interested in making biodiesel...
Why is this bioplant being repo'd?
Perhaps FrackOil is pricing seed
A lot depends on what you paid for it (c:.. If it was $5 then you're in cotton.
If it was lots more, then wont be joy involved (c:
Craigslist. Nothing wrong with selling it, it can be used by an amateur
operator on 10 meters. But it was designed as an amplifier for CB radios.
Yours has two
Is there any heat involved, or are they cold formed?
Is their structural integrity compromised by the presence of green minerals??
On Tuesday, January 14, 2014 11:35 PM, Dieselhead 126die...@gmail.com wrote:
Andrew wrote:
People, it's time to change the subject line again. I am tired
Actually I think that deal *might* suck dead gerbils thru a green garden
hose..
It has 512 K on board memory.. and a slot for an SD card.
The standard units available from reliable suppliers have also an 8 GB SD card
supplied, often with software you'll need installed. I did not see that
The replacement of the servo electronics in older 123 and 107 chassis comes to
mind. And the pulse train generator to the monovalve on the newer 123s.
That may be the same ACC everbody else is talking about but...
Automatic headlight dimmer. Childproof door lock above 5 mph. Cruise
I'm pretty sure the hiring of large numbers of people is on the decline. Full
time hiring of anybody other than a college graduate ( no experience ) or a
graduate that's been out 5 years ( major experience ) is on the decline because
nobody can predict their company's future beyond the end of
You're confused.
I'm neither Fat nor in FL.
Sorry.
On Thursday, January 9, 2014 12:38 AM, Dieselhead 126die...@gmail.com wrote:
Dude, I'm not FL FATS ... but I might still agree with you.
You claimed to be in FL and you are fat. you like MN fats better?
When the screw on filter is bad, it often goes bad very slowly. This is
assuming a vehicle that is used semi regularly and fed fuel that is semi clean.
My experience is that they just begin to restrict the fuel flow to the point
that the car will run but has no power. My NA 300D would run
Dude, I'm not FL FATS ... but I might still agree with you.
On Wednesday, January 8, 2014 9:23 PM, Dieselhead 126die...@gmail.com wrote:
When the screw on filter is bad, it often goes bad very slowly.
This is assuming a vehicle that is used semi regularly and fed fuel
that is semi clean.
Two folks in the home going to work = higher discretionary income
Higher discretionary income = eventual higher prices ( cars, homes ) as a
function of capitalism
Higher prices = requirement for two incomes
Two income requirement = kids raised in mass storage facilities
Kids raised in mass
I did most of what you're talking about on an old Dell laptop I had, and after
the 41 ( or so ) updates, the machine booted once and crashed. That was the
end of that. I went back in 'history' to a functional point and made that my
starting point, ignoring the updates that it had just
cliches just cover for a lack of core competence in many public school
teachers
Cliches and tenure, actually...
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
Sogolow Starter Alternator Works
499 Main St
Norwich CT
203-889-7269
203-889-4889
Doug Sogolow
Owned a 113 chassis SL for years, then abandoned it for an SEC I believe
Don't know if the numbers / addy are any good any more... it's from a magnet
tag on my toolbox (c:
On Wednesday, November
Sogolow Starter Alternator Works
499 Main St
Norwich CT
203-889-7269
203-889-4889
Doug Sogolow
Owned a 113 chassis SL for years, then abandoned it for an SEC I believe
Don't know if the numbers / addy are any good any more... it's from a magnet
tag on my toolbox (c:
Show message history
On
And I guess the little Chromebook got confused and sent a reply to everything
open since I walked into the garage and out of range of the wifi .. sorry for
interrupting...
On Wednesday, November 27, 2013 8:41 PM, Richard Hattaway
rhatta...@rocketmail.com wrote:
Sogolow Starter Alternator
I'll be glad to discuss BBQ with anyone, anytime. I'll even take them to
Lexington ( 20 minutes from my house ) and buy them some if they stop by.
However, the discussion will not have anything about SC, Kansas, Georgia, Texas
or any of those other imposters mentioned. No reason to insert
The stars are unique... the only hood ornament that, in the correct atmospheric
conditions, will condense water on your windshield as you drive down the road.
IE, no rain, but heavy humidity, cool, etc. You'll get a big cloud of water in
the center of the windshield.
I promised myself that
And also extremely slick. Don't drive in at any speed out of a rainstorm
unless you want a rear entrance in the garage (c:
The epoxy finishes are pretty good. I am getting ready to do that in my garage
as soon as all the other projects around here get done. My wife wants the
black and white
Dan,
Spooky picture for sure.. The car door open is interesting, but if you go to
the street view you can inspect the three bags of recycle and see the two white
and one black garbage bags... The contents of that first recycle bag looks
interesting.. h
On Saturday, November
You will need all the room you can muster. Don't remember for sure about the
starter, but the intake manifold is not a big deal to pull and it'll help a
bunch.
The thing looks like it's just screwed in there, but in truth there are three
million molecules of bust ass in there devoted to
Ran into something similiar here, only stricter.. the shop would not mount my
tire no matter the age. Safety concerns.
I've dealt with the shop for years, had a poor puppy dog look I guess... they
told me to tip the mechanic, he'd be on break in 5 minutes. So I got it
mounted, and it only
I made a tool for the `123 chassis. It might work on a 126. it was cut from
3/4 plate with one of those fancy wire machines, then welded together.
It's available to anybody who wants it. It's heavy ( no chit ) and requres a
bottle jack to complete the assembly.. but it's in Salisbury NC for
, Randy Bennell rbenn...@bennell.ca
wrote:
How about some photos and maybe measurements?
Randy
On 14/11/2013 6:08 AM, Richard Hattaway wrote:
I made a tool for the `123 chassis. It might work on a 126. it was cut from
3/4 plate with one of those fancy wire machines, then welded together
There were 500's in that era, a buddy had a 500SL back then. Great googly
moogly that thing could eat gas.
On Tuesday, October 29, 2013 9:07 PM, Kaleb C. Striplin ka...@striplin.net
wrote:
I did not ask if it was worth that much, I asked if it was rare. If it really
is a 500 it is rare
Rick,
What in the world do you have against list members (c: .
ADESA sells a running rust free 300D with NA 617 mills for $300. ( admittedly
the passenger front fender had been painted with a brush and the pads were
junk, but... ) They should really be getting the scrapper in there, eh?
I have a raft of blank keys for the 123 series machines. Does that help?
On Thursday, October 17, 2013 5:28 PM, Gary Hurst jabbahur...@gmail.com wrote:
the only guy who will sell me keys wants notarized documentation. some of
you guys claim to know of a dealer with easy terms but i cannot
Nor in North Carolina..
On Saturday, October 12, 2013 8:24 PM, Alex Chamberlain
apchamberl...@gmail.com wrote:
On Sat, Oct 12, 2013 at 4:20 PM, OK Don okd...@gmail.com wrote:
Most be location specific. There is no progressive chatter in OK.
Not even on public radio?
Alex
Stuff from Radio Shack is fine. Spread it thin to win (c:
On Friday, October 11, 2013 9:50 AM, Mitch Haley m...@voyager.net wrote:
Ever wonder how well Mustard or Chocolate work as thermal paste on a CPU?
http://www.hardwaresecrets.com/article/Thermal-Compound-Roundup-February-2012/1490/5
I use a Chromebook (c:
On Friday, October 11, 2013 7:51 PM, Dan Penoff d...@penoff.com wrote:
I retired my 20 C2D iMac for the youngest son to take to college to augment
his Toshiba i7 laptop. To replace the iMac, I bought a Mac Pro 1,1 from a
fellow Mac buddy for $400 shipped to my
Check/clean the fan filter. If the case has unusual heating situations, it
will do funny things with a touchpad or pencil eraser mouse.
On Thursday, October 10, 2013 9:54 AM, Gerry Archer arche...@embarqmail.com
wrote:
Grandson gave me his Lenovo Thinkpad the school provided after he
Only us old people.
From: WILTON wilt...@nc.rr.com
To: mercedes list mercedes@okiebenz.com
Sent: Monday, September 30, 2013 9:36 AM
Subject: [MBZ] All alone - abandoned
Anybody there?
Wilton
___
http://www.okiebenz.com
Actually you should change it regularly. If you do a lot of service, it's
almost monthly. There are guidelines which I don't remember, but I do remember
them surprising me at how often it should be changed.
From: m...@voyager.net m...@voyager.net
To:
Nothing wrong with that car as long as your jack has a 3 1/8 inch pin ..
From: Frederick Moir fredy4.s...@yahoo.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Wednesday, September 25, 2013 6:27 PM
Subject: [MBZ] Fw: 1985 Mercedes Benz 300TD wagon
The glowplugs can be 10ga, no worries there, remember as somebody else said
its only 16a on a 4cyl. The one that really ought to be heavier is the wire
from the battery to the solenoid which has to carry the whole 80a. 10ga seems
to be adequate, in that its always worked for me but bigger is
Although the relay is involved, you need to revisit the diagnosis.
My concern is that having 12+ on the plug and 10+ at the battery says you are
creating energy somewhere. Einstein says this can't happen. The
battery/alternator are the source in the system, everything else is downhill.
Go
I have a 2001 F-250. Got it new, love it. Diesel was 4K$ more at the time,
and it just wasn't worth it, even though fuel was cheaper then. If you tow all
the time for a living, then a diesel is a good thing. If you're buying a
utility truck to go to the lake, pick up lawn stuff, and in
not as bad here)
thats 35 cents difference or around 9%. So my contention is that you spend an
extra 9 cents to save 33. You don't have to hit me twice with a stick...
-Curt
Date: Tue, 17 Sep 2013 15:19:24 -0700 (PDT)
From: Richard Hattaway rhatta...@rocketmail.com
To: Mercedes Discussion List
13.7-14.2 volts, or so.
From: Bob Rentfro azbob...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Monday, September 16, 2013 6:19 PM
Subject: [MBZ] Volt Reading Across Battery
What should the volt reading across the battery be when the
Sent: Monday, September 16, 2013 6:30 PM
Subject: Re: [MBZ] Volt Reading Across Battery
I just replaced the alternator and the reading I get across the battery is
10.45.
What the heck...
Bob R
On Mon, Sep 16, 2013 at 3:27 PM, Richard Hattaway
rhatta...@rocketmail.comwrote:
13.7-14.2 volts
Use part of the old tube to make an inner liner to protect the new tube.
Beat the concrete off with a rubber mallet. Most of it will exit.
Then you can paint it.
Don't store iris bulbs from that nice old lady over the winter. They have some
kind of acid inside that makes them eat holes in
as you suggest, perhaps
your sister needs to get out more,...? ;-)
cheers!
e
On 10/Sep/13 10:12, Richard Hattaway wrote:
My sister lives in California, and there it appears that some have
significant bias toward anyone of Asian descent, no matter the name. AFAIK
there is no bias here
The internet is full of concepts and opinions. I couldn't stand it, so I went
to one of the largest purveyors of opinion to see what they say
http://en.wikipedia.org/wiki/Orient
So it certainly appears that it depends on what country you live in, and in our
country, depends on what state you
Wilton,
As Marshall took his last breath, he whispered to me that he really think's
it's OK if someone does not sign his posts. (c:
And you can take Rowan County's recently adopted PC terminology for your county
if you wish. You're close enough and old enough (c:
What happened to the
I wasn't passing judgment on his racism, or lack thereof, but merely the
precision of his syntax.
I am at a loss here. Is the term Oriental or Asian not politically correct any
more?
In my redneck area of the world, the two are the same, and neither is
considered offensive or racist.
Do I
So they think it's a four cylinder??
I'd go look at that car if it were on this coast. The price is right for here,
and I love English Red.
From: clay redgh...@comcast.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, September 10,
to damage the diodes swapping terminals as long as nothing is crossed.
Mike
Who is trying to be of help and takes offense to being told he is an idiot,
in so many words.
On Sep 3, 2013 5:04 PM, Richard Hattaway rhatta...@rocketmail.com wrote:
What kind of claim is this???
Jumper cables
that trying to start the car with normal
lightweight jumper cables at best probably isn't going to work and at worst
is going to burn through the cables and possibly start a fire...
-Curt
Date: Wed, 4 Sep 2013 09:12:08 -0700 (PDT)
From: Richard Hattaway rhatta...@rocketmail.com
To: Mercedes
,
Gerry
From: Richard Hattaway rhatta...@rocketmail.com
Like everybody else has said, please change the battery before you go to
all that trouble. You could even just use some jumper cables and clamp
another one in parallel to the toasted one to prove your point. Much easier
than messing
Like everybody else has said, please change the battery before you go to all
that trouble. You could even just use some jumper cables and clamp another one
in parallel to the toasted one to prove your point. Much easier than messing
with regulators and drill presses (c:
than the cables got warm. Got another set of wimpy cables
from somebody else and waited around when the second set was warm too the car
started...
-Curt
Date: Tue, 3 Sep 2013 14:04:41 -0700 (PDT)
From: Richard Hattaway rhatta...@rocketmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
:21 PM, Gerry Archer arche...@embarqmail.com wrote:
That's a good idea, Richard. I'll put the 240D and the 300D side by side
and jumper with all the cables off. I know the 240D battery is good.
Batteries are both group 49.
Thanks,
Gerry
From: Richard Hattaway rhatta...@rocketmail.com
Like
If an alternator acted as a simple supply of E in said equation, then yes, this
is true. One could also insert an R with a value of 0 and have the alternator
provide infinite charge.
However, an alternator actually depends on the battery for excitation of its
field windings, and a battery
Hey Luther, when you go tablet shopping, look carefully at the Acer Chromebook.
It's under 200 bux and runs rings around my wife's tablet.
From: Benz Hogs benz-n-h...@gulseth.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, September 3,
Yep, slipsies might introduce more questions than answers. Just make the 240D
bare posts, and set up the jumpers. If you get 13.7 when the 300 D is running,
then look at the battery in the 300D closer.
You really don't have to disconnect the 300D battery to make the test.
I think you are
Answers among the questions
From: Gerry Archer arche...@embarqmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Monday, September 2, 2013 9:00 PM
Subject: [MBZ] Alternator question '83 300D
Sorry to interrupt this ongoing discussion about
Yeah, but comming from where you live it was probably a rust bucket ...
From: Kaleb C. Striplin ka...@striplin.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Saturday, August 31, 2013 1:55 PM
Subject: Re: [MBZ] 300SD available
I saw an
, 2013, at 9:25 PM, Richard Hattaway rhatta...@rocketmail.com wrote:
Yeah, but comming from where you live it was probably a rust bucket ...
From: Kaleb C. Striplin ka...@striplin.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Saturday
Rented a Toyota Corolla the other day for a trip while the wife's car was in
the shop. It was one of the 'Sport' models.
That thing was a rocketship compared to any older MB I've owned. Course most
of my stuff was diesels, but did have a coupla M110 engines in my career.
The little nippon
But in this line of thought, the MB 300CD was a collectible as well, only 5K
made. Yet they are dogs on Craigslist, and for 20K you can have a stable full.
From: Michael Canfield slozuk...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent:
today
in a decade or two, the 300CD will be a valuable collectable and your dying
words will be i coulda had one for 2 grand and it was nice too!
On Fri, Aug 30, 2013 at 1:20 PM, Richard Hattaway
rhatta...@rocketmail.comwrote:
But in this line of thought, the MB 300CD was a collectible as well
me2
I'm preserving precious bandwidth
--R
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
I guess I live under a rock. What phone company does not supply free long
distance service to home phones now??
From: Alex Chamberlain apchamberl...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, August 27, 2013 10:29 AM
So why don't you put in a wireless router? Only cat cable I have in my house
is the run from the cable modem to the wireless router. Almost everything else
runs on wi-fi.
I say 'almost' because I do have a cell phone system that requires connection
to the internet, and it is hard wired to
R-12 is available if you're interested. Remove the [MBZ] from the subject line
and drop me an email if you wish.
From: Michael Esh michael...@mac.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, August 27, 2013 8:38 PM
Subject: Re:
(231) 893-3306
9790 US Highway 31, Montague, MI 49437
Please give them a call. They have the Bosch sign on their building.
On Aug 24, 2013, at 8:29 AM, Richard Hattaway wrote
I cannot imagine a shop saying that an injection pump timing check would be
prohibitively expensive. It's actually
Will someone define bandwidth for me, please.
--
I agree w/ Rich: Kleb, it would be beneficial to all to just shut off his
email.
I cannot imagine a shop saying that an injection pump timing check would be
prohibitively expensive. It's actually a very educational test to do, and at
least some of us have 'homebrew' drip tubes laying around to do it with. Not
hard at all to make.
Professionals have the Snap On timing
Does look neat.
I think of the sound made by my nylon ratchet straps on a trailerload of stuff
if I forget to put some turns in the strap.. you'd think there was a giant
hummingbird behind me (c:
From: Craig diese...@pisquared.net
To: Mercedes Discussion
1 - 100 of 268 matches
Mail list logo
