Now that we’re in the wonderful world of syspatch(8) – which works well for me
so far (thanks for the hard work, everyone!), I’m trying to figure out if
there’s still any point to using m:tier’s openup tool.
>From what I can tell, running “syspatch ; pkg_add -u” is pretty much
>equivalent to wh
I still haven't found this answer anywhere...
Does OpenBSD (more specifically, pf(4), I guess) support RFC 6296,
IPv6-to-IPv6 Network Prefix Translation? Looks like FreeBSD can do it,
but I can't tell if that's something they added to their own pf fork, or
if I'm just missing something in the
> > I know I can do NAT66, but I don't think it's feasible to emulate NPT
> > using NAT66 rules.
>
> No, NPT is different and can't be emulated by anything that OpenBSD's
> PF currently does.
Shoot. I was really hoping pfSense managed it through some feature that
predated FreeBSD's pf(4) import
So I’ve discovered that, when trying to do NAT66 (for a ULA network), a line
like:
"match out on egress inet6 from !(egress:network) to any nat-to (egress:0)"
doesn’t work. (Yes, the network in this case is ridiculously simple.)
I believe it doesn’t work because :0 indicates that aliases on the
Maybe I missed the email here, but in case it actually doesn't exist:
OpenBSD 6.1 is now supported on Microsoft Azure courtesy of reyk@ and
the team over at Esdenera® Networks, with assistance from Microsoft. At
least that's what I got out of the BSDCan announcement.
I'll let Reyk blow his o
> From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of
> Stefan Sperling
> Sent: July 10, 2017 16:17
> Subject: Re: Doubts about the successors of OpenBSD leadership and development
>
> Obviously, Theo de Raadt will succeed Theo de Raadt in the leadership
> and development of
On 2018-04-12 20:02, Nick Holland wrote:
On 04/12/18 09:47, Consus wrote:
On 08:28 Thu 12 Apr, Nick Holland wrote:
Another "failure mode" of VirtualBox people should be aware of:
I understand through good sources, Oracle monitors the IP addresses
that
it's downloaded from, and if they can trac
On 2018-05-19 02:59, justina colmena wrote:
https://man.openbsd.org/mandoc.css
That's the css. You style it how you like it. That's the whole point
of it. And I agree. It's very readable on my phone.
Original message From: Mihai Popescu
Date: 5/18/18 11:04 PM (GMT-09:00) To:
m
On 2018-07-24 17:54, Diana Eichert wrote:
ok, answered my own question by grep'ng within /usr/share/man/man4,
looks like azalia(4) systems. Was hoping for something usb attached
but no such luck.
On Tue, 24 Jul 2018, Diana Eichert wrote:
I'm trying to connect to an audio system that only has S
On 2018-07-18 09:35, Tom Smyth wrote:
Hi John,
You would need microsoft services for unix (SFU) for NFS connectivity
FYI - so no-one goes haring off in the wrong direction.
SFU is the server-side component, equivalent to running nfsd(8).
On the client side, only certain editions of Windows ca
Hello,
I’d like to use OpenBSD to build a MIDI synthesizer using SoundFonts, as the
OpenBSD MIDI and audio subsystems are remarkably understandable and sane,
compared to everything else out there today.
�
However, I’m having difficulty finding a combination of hardware that is known
to be su
On 2020-04-16 02:13, Ono Caritofilaxy wrote:
Hello.
I want to mount /usr/local/srcdir /usr/local/dstdir/subdir
answer was "no" 3 years ago
https://marc.info/?l=openbsd-misc&m=149743861203607&w=2
Can I do this now?
If not - why? Is it dangerous?
You should be able to do this as an NFS mount.
When I use co(1) with "-l" to check out a file (and/or "ci -l") is there
any way to preserve file ownership and *not* have it reset to the user
running co(1) or ci(1)?
I don't see anything in rcs(1), co(1) or ci(1) that even mentions the
fact that the file will wind up owned by the user running
change the ownership.-Adam
> On Apr. 29, 2020 13:32, Anders Andersson
wrote:
>
> On Wed, Apr 29, 2020 at 7:46 PM Adam Thompson
> wrote:
> >
> > When I use co(1) with "-l" to check out a file (and/or "ci -l")
is
> there
> >
On 2019-07-14 15:40, Stuart Henderson wrote:
If you don't want trackable prints, don't buy a colour laser printer
of any brand, it is very common. Unsure about mono and inkjet printers,
I would tend to assume that they're common on at least most hi-res
colour printers.
Nearly every printer sold
Hi,
[Cross-posted to misc & ports as I'm not sure if there's a bug in
software or in wetware.]
I'm trying to run nmap (from ports) on 6.5-STABLE but am getting an
ungoogle-able error message every time:
root@bgpmirror:~# nmap -Pn -A -n --top-ports=100 -6
2620:132:300e:700::113
Starting
On 2019-07-22 09:51, Adam Thompson wrote:
Hi,
[Cross-posted to misc & ports as I'm not sure if there's a bug in
software or in wetware.]
I'm trying to run nmap (from ports) on 6.5-STABLE but am getting an
ungoogle-able error message every time:
Forgot to mention - this o
On 2019-07-23 12:43, Stuart Henderson wrote:
On 2019-07-22, Stefan Sperling wrote:
If your university class prefers using git, I'd recommend the
repository at
https://github.com/openbsd/src.
However, it doesn't include branches/tags, because we haven't found
anything that
is able to succes
Summary: I open cua0 with cu(1), quit cu(1), try to re-open with cu(1)
but now it immediately fails with EBUSY. *Usually* doesn't happen with
USB-to-serial (cuaU[0-9]) but have still seen it once or twice.
I've seen this behaviour on OpenBSD 6.4, OpenBSD 6.5, and FreeBSD 11.2,
and on 3 radic
On 2019-08-03 18:14, Theo de Raadt wrote:
Adam Thompson wrote:
Summary: I open cua0 with cu(1), quit cu(1), try to re-open with
cu(1) but now it immediately fails with EBUSY. *Usually* doesn't
happen with USB-to-serial (cuaU[0-9]) but have still seen it once or
twice.
[...]
Yo
[OpenBSD 6.5-STABLE, up to date]
When using bgpctl(8), I'm able to do almost everything I need, but I'm
having trouble figuring out how to do one thing:
How do I show routes that do NOT have a community (or ext-community, or
large-community) attribute?
The best I can come up with so far is
On 2019-11-02 11:14, Peter Nicolai Mathias Hansteen wrote:
2. nov. 2019 kl. 16:00 skrev Oliver Leaver-Smith :
What tools do people find useful for writing on OpenBSD? By writing I
mean long form such as novels and technical books, including plot and
character development, outlining, and format
On 2019-11-01 06:12, Mischa wrote:
On 1 Nov 2019, at 12:08, Alfred Morgan wrote:
My current workflow looks something like this:
$ cd /usr/ports
$ make print-index | less
I search and scroll through and find something interesting such as
opensonic.
I read the Info: game based on the Sonic the H
Oh, ok... Do you recall an example offhand? (I haven't noticed systemic
problems with either, but then I'm hardly a ports expert!)Thanks,-Adam
On Nov. 7, 2019 07:18, Marc Espie wrote:
On Wed, Nov 06, 2019 at 04:44:48PM -0600, Adam Thompson wrote:
> Also http://openports
Ah, there's a good answer to the question I just asked Marc, thanks!-Adam
Hi,
On 6.6-STABLE, I'm looking at security(8) and it's not immediately
obvious to me how I can have an SSH key-only user who does not have a
password, that also does not trigger daily security warnings.
The goal is to have a user that can never log in on the console, or via
password any other
There's no mention of what syspatch(8) returns, in the manpage.
I can prove quickly enough that it exits(0) when there's nothing to do,
but I'm more interested in knowing (for automation purposes) what the
return values are in other circumstances, and all my systems are already
up to date. Be
On 2020-02-05 13:56, Claus Assmann wrote:
I need to buy a printer to connect to one of my OpenBSD machines
and I prefer a USB connection (as I don't control the network at
my current place). Can I just buy any USB printer or are there
printers which do not work with OpenBSD? If so, what do I nee
On 2020-02-09 06:58, Michael G Workman wrote:
Hello,
Shout out to the OpenBSD developers for making a great OS!
I was able to install OpenBSD 6.6 on a Dell Latitude e6400 laptop, with
a
USB Install. Sent the dmesg in already.
The installer would not recognize the hard drive, a brand new SSD
On 2020-02-10 09:36, Michael G Workman wrote:
Ok, thanks for the info.
For your E6400, see this guide:
https://www.parts-people.com/blog/2012/10/16/dell-latitude-e6420-cmos-battery-removal-and-installation/
I found E6400 CMOS batteries from multiple vendors on the first page of
Google resul
On 2020-02-08 06:03, Antoine Jacoutot wrote:
On Fri, Jan 31, 2020 at 09:03:59AM -0600, Adam Thompson wrote:
There's no mention of what syspatch(8) returns, in the manpage.
I can prove quickly enough that it exits(0) when there's nothing to
do, but
I'm more interested
None of the Taymor levers are quite right. So I went looking, and I
found some of what I'm looking for.
Short list:
(top pick)
1. Omnia 762, plus privacy bolt. I love it but holy shit that's
expensive @ ~US$180ea!
https://www.omniaindustries.com/product/762/
2. Rocky Mountain Hardware'
On 15-10-25 03:46 AM, Some Developer wrote:
I'm just wondering what hardware spec I'd need push 20 gigabits of
network traffic on an OpenBSD server?
Short answer: It's not generally possible today, at least for your use
case.
Medium answer: Contact Esdenera Networks to find out. They mana
On 15-10-27 02:53 PM, Martin Schröder wrote:
And then there are SSDs. PCIE SSDs do up to 3000 MB/s write throughput.
https://www-ssl.intel.com/content/www/us/en/solid-state-drives/solid-state-drives-dc-p3608-series.html
And I'm sure there are tape libraries that can write that, too. :-)
I disre
Thank you for the reply. I see now that my request was wildly
unrealistic.
Not "wildly", just unrealistic unless you have a massive budget.
Basically I'm trying to write a business plan and am trying to plan
for the worst case scenario so I don't fall over if traffic somehow
spikes to such lev
On 15-11-10 01:45 PM, Giancarlo Razzolini wrote:
As a general rule you should avoid using dns names on anything that
might cause the boot process to fail. Even more, you should really
avoid using names on hostname.if files.
Anybody run into this before? - is the fix to add all the symbolic
na
On 16-01-21 04:02 PM, rizz2pro . wrote:
I know the CARP interface's MAC address is generated by the VHID so I am
sort of leaning towards it be an ARP issue and possibly not an issue with
the OBSD system. But I am hoping for some hints or ideas from you guys.
I have a suspicion... what kind of swi
On 16-01-23 08:34 PM, Ted Unangst wrote:
I will add that one of the reasons we have support for all these
museum pieces is that people can build their very own museum and run
something interesting on it. But running on emulators doesn't really
satisfy that goal. If there are, in fact, no museum
On 16-01-25 03:43 PM, rizz2pro . wrote:
> Ok we've figured it out.
>
> We have a couple identical environments all attached to one switch and
> they are all advertising the same VHIDs to each other and it looks to
> be causing some arp problems. (Environment A was getting CARP
> advertisements from
On 16-01-26 10:32 AM, Peter Hessler wrote:
On 2016 Jan 26 (Tue) at 08:13:22 -0600 (-0600), Edgar Pettijohn wrote:
:> * adduser(8)/useradd(8):
:> Needs to be unified into one single
One binary, with symlinks. Both methods should still work, however.
$0.02:
s/sym/hard /g
might satisfy a
On 16-02-01 12:19 PM, Tinker wrote:
My purpose with asking for SSD-accelerated HDD was DOUBLE:
1) I need some SSD storage but don't like that it could break
together - I mean, a bug in your system will feed your SSD at full
bandwidth for ~7h-7 days, it's completely fried - that's not OK, so
On 2017-12-26 14:56, Jordan wrote:
I've recently gotten my hands on a couple shiny new SPARC T4-1 and
T3-1 servers and I was looking to install OpenBSD with a softraid
mirror on them for production use. The problem is, is that I end up
with this upon following the install instructions and rebooti
e and was hoping to be able to do the 3 disk
>RAID1 offered by OpenBSD softraid. Do you know if bioctl(8) is capable
>of controlling the onboard raid controller, or will I need to do all
>raid rebuilds via the hardware raid bios on the T4?
>
>
>On 12/28/17 08:58, Adam Thomp
On 2018-03-20 15:18, Xianwen Chen wrote:
Dear Mihai,
Although your tone in your email was not pleasant,
You are posting to OpenBSD-misc. Objectionable tone is very common,
particularly for users who *appear* to be complaining about
immeasurably-small problems that aren't actually significant
[Replying directly as well, as I believe my MTA is still blacklisted by
the OpenBSD mail server. Guess we'll find out! -Adam]
On 2021-01-17 20:09, Tilo Stritzky wrote:
On 14/01/21 17:38 Andrew Grillet wrote:
Hi
I am running OpenBSD on a T2000 (Sparc64).
I was trying to use the serial port fr
On 2021-01-19 19:15, Nick Holland wrote:
On 1/19/21 4:35 PM, Adam Thompson wrote:
I ran into this exact problem last year. It'll be in the list
archives.
According to Theo (if I understood him correctly) it's partly due to
the
way BSD serial ports have always worked, i.e. in a ra
For what it's worth, this is one thing that Cisco PIX firewalls actually
do very well. I won't use them for ordinary internet-facing firewalls,
but for your scenario they're perfect.
-Adam Thompson
athom...@athompso.net
possible your hardware has something
to do with it, but unlikely. I haven't tested anything illumos-based.
-Adam Thompson
athom...@athompso.net
en run dual-DVI off the
laptop!
--
-Adam Thompson
athom...@athompso.net
p,
while nifty, is unlikely to work 100% with OpenBSD - the components will
likely be too new and support will be lacking. OTOH, the screenshots
show Ubuntu Linux, so I could be wrong here.)
--
-Adam Thompson
athom...@athompso.net
t older, and a
bit more expensive than the US site, and support isn't *quite* as good,
but they still provide a pretty good deal for people with Canadian
shipping addresses.
Refurb laptops also show up from time to time on Tigerdirect.ca and
Newegg.ca, usually at competitive prices.
--
-A
pfsync, though.
--
-Adam Thompson
athom...@athompso.net
a) does this add much value?, and b) would it work
at all if the "LAN" interface [so to speak] is currently not the CARP
master?
--
-Adam Thompson
athom...@athompso.net
s is so far unequalled in
my book. I've worked with them since ~1999 and I haven't yet seen any
cause to doubt them.
I do wish they were a little bit more price-competitive, but at least
you get what you pay for.
--
-Adam Thompson
athom...@athompso.net
ce to load the kernel directly off the root filesystem
instead of having two auxiliary filesystems just to hold the kernel.
(And, if it does work this way with RAID 1, when did that start happening?)
--
-Adam Thompson
athom...@athompso.net
keeping the manpages up to date isn't a "feature" I'd like
to see brought over to the BSD world. One of the fundamentals of OpenBSD
has historically been correct documentation.
--
-Adam Thompson
athom...@athompso.net
re dead system from affecting a running network.
(in theory, anyway :-)
Altroot prevents corruption of a root partition from being completely
fatal; it's a point-in-time backup copy of / that you can restore from -
and in the worst-case scenario, replace the entire root disk with.
--
-Adam Thompson
athom...@athompso.net
port would be a very nice thing to have,
considering that in other ways OpenBSD is already a very capable
router. I'm not in a position right now to pay someone properly to
implement it, but I can sustain the cost of another case or three of beer.
--
-Adam Thompson
athom...@athompso.net
ing as old as I am, so large quantities
of beer and caffeine may no longer be ideal.
--
-Adam Thompson
athom...@athompso.net
g, or is this broken?
--
-Adam Thompson
athom...@athompso.net
I run "bgpctl show", both routes are marked with origin
"i" (i.e. IGP).
Do I have to use "set origin egp" in the external neighbour's stanza in
/etc/bgpd.conf? Doing so works, and produces the expected output, but
should it be necessary?
--
-Adam Thompson
athom...@athompso.net
ansfer speed and
reduce CPU load (both important in my case) by switching to "arcfour".
So far, the only workaround is to specify the FQDN or IP address, both
of which are less than ideal.
--
-Adam Thompson
athom...@athompso.net
outer processes any given packet
(AFAICT).
-Adam Thompson
athom...@athompso.net
Hi Adam,
It almost works.. Sadly I believe the pfsync delay can be higher than
the sessions RTT and so it wont always work. I.e. the internal server
replies before the other firewall has got the state..
The o
Oh. Duh. That makes perfect sense...
I can't test it until tomorrow morning but that solves all the problems, I
think.
-Adam
Chris Cappuccio wrote:
>Adam Thompson [athom...@athompso.net] wrote:
>>
>> Well, you could - perhaps - flip this on its head. Instead of changin
On 13-11-11 11:48 PM, Chris Cappuccio wrote:
Adam Thompson [athom...@athompso.net] wrote:
Well, you could - perhaps - flip this on its head. Instead of changing BGP,
what about forcing one router to be the master (via advbase/advskew),
advertising a lower BGP preference (probably by using both
PROBLEM STATEMENT: driving FluidSynth from a MIDI controller produces ~1/4sec
delay between keypress and sound.
NARRATIVE:
I finally got Qsynth working under Xfce (it freezes X under twm!) so I can
control fluidsynth in a reasonably-obvious way... but I am now experiencing
substantial latency.
I've successfully installed OpenBSD 6.4-RELEASE at OVH, but I'm noticing
one thing there that's different from everywhere else I've used 6.4.
tset(1) takes approximately 12-15 seconds to execute, (almost) every
time.
On a DigitalOcean VPS running 6.3-STABLE (via openup) tset sensibly
takes a
On 2018-12-02 20:50, Philip Guenther wrote:
> On Sun, Dec 2, 2018 at 2:15 PM Adam Thompson wrote:
>
>> I've successfully installed OpenBSD 6.4-RELEASE at OVH, but I'm noticing
>> one thing there that's different from everywhere else I've used 6.4.
&g
On 2018-12-02 22:12, Adam Thompson wrote:
> I'm unsure if my test is valid, but I switched to i8254 (confirmed successful
> via sysctl), and tset(1) continues to pause for an unnaturally long time.
> But then I rebooted and re-tested the same sysctl vaules, and this time
>
Running 6.4 (-stable, via openup/mtier).
I have bgpd(8) talking to my border router, acting as a route collector.
That part seems fine.
I now have httpd(8) configured trivially to run bgplg(8) (per the
bgplg(8) manpage) but it's not working, and I can't tell why. **EDIT:
yes, I can, see below
[Cross-posting here before I give up and switch to Postfix -Adam]
I have an old instance that uses smtpd's virtual to rewrite *sender*
addresses.
Reading the 6.4-STABLE version of the smtpd.conf(5) manpage, I can't see how to
accomplish my goal any more - it looks impossible.
I don't want t
larification.
-Adam
-Original Message-
From: Edgar Pettijohn
Sent: Wednesday, January 16, 2019 8:12 AM
To: Adam Thompson ; misc@openbsd.org
Subject: Re: smtpd - help needed tranlsating to new virtual map syntax
It would be helpful if you show what you have tried.
Should be as simple as:
action
addresses.)
-Adam
-Original Message-
From: owner-m...@openbsd.org On Behalf Of Adam Thompson
Sent: Wednesday, January 16, 2019 8:26 AM
To: 'Edgar Pettijohn' ; misc@openbsd.org
Subject: Re: smtpd - help needed tranlsating to new virtual map syntax
As I said, I haven't tried
I found the "-T" (trace) flag to smtpd(8), and it gives me this, which AFAICT
confirms my suspicions:
[...]
rule #2 matched: match from src allowed-hosts for any => translate
lookup: lookup "athom...@athompso.net" as ALIAS in table
static:translations -> 0
lookup:
On 2019-01-21 04:08, Gilles Chehade wrote:
In this test case, my translations map had:
What is a translation map ?
There is no such thing in OpenSMTPD (as of today).
A virtual map that happened to be called .
You're feeding the virtual table with invalid values.
Apparently, yes.
Also, t
In bgpd.conf(5), for the "dump" directive there is an optional "timeout"
parameter. What is its purpose? I assume from the examples that it's
denominated in seconds...
my first guess was to time out on attempting to write to the dump file,
but that doesn't seem realistic. It looks like it's
it would be helpful to me. Which is probably obvious
since I'm suggesting it...) Something else to tack onto the to-do list, I
guess.
Thanks,
-Adam
On February 8, 2019 5:23:24 PM CST, Claudio Jeker
wrote:
>On Fri, Feb 08, 2019 at 03:56:12PM -0600, Adam Thompson wrote:
>> In bgp
On 2019-02-14 02:01, mailingli...@dotbit.ro wrote:
I would like to keep tabs on the MAC/IP addresses in my secure net.
I do know how to do this, but keeping track of ethernet MAC addresses
seems
quite cumbersome in OpenBSD, not that it is more convenient in any
other
general purpose operating s
I know this has been asked before, but my google-fu cannot unearth any
trace of it, so I have to ask again - sorry!
What version of cvsweb does cvsweb.openbsd.org run? And where is that
software available? It appears to not quite be the same as cvsweb in
ports, so... ?
Thanks,
-Adam
Hi,
I'm getting daily insecurity (i.e. security(8)) nags about userids that
are off but still have a valid shell and access files. (Specifically,
I'm getting the nag from check_access_files() in /usr/libexec/security.)
Since ports (at least in my experience) regularly creates userids that
wi
Whoops... I'm getting the messages from 3 systems, all running
6.4-STABLE, with no local modifications, under both VMware and
Openstack, using openup to keep systems updated. Dmesg available if
anyone thinks it's relevant.
-Adam
On 2019-02-25 08:50, Adam Thompson wrote:
Hi,
I
Use vipw to put 13 * in the password field
From passwd(5)
[...]
authentication, conventionally have 13 asterisks in the password
field.
Thank you! Now that I know what I'm looking for, I can see the relevant
code in security(8), too.
I wonder if there's a way for ports to do that for me w
On 2019-02-25 11:14, Stuart Henderson wrote:
On 2019/02/25 09:13, Adam Thompson wrote:
> Use vipw to put 13 * in the password field
>
> From passwd(5)
> [...]
> authentication, conventionally have 13 asterisks in the password field.
Thank you! Now that I know what I'm lo
On 2019-04-03 11:30, Stuart Henderson wrote:
On 2019-04-03, =?utf-8?B?RnVuZw==?= wrote:
apache support somthing like
Order Allow,Deny
Allow from all
Deny from 1.2.3.4
How to achieve in OpenBSD's httpd?
We are using OpenBSD 6.4.
There is no built-in simple way.
It can be done by having h
I've upgraded my looking glass from 6.4 to 6.5, and an experiencing an
unexpected problem - routes learned from one (iBGP) peer are not being
automatically exported to other (eBGP) peers.
I did not change /etc/bgpd.conf, but behaviour seems to have changed
nonetheless. The upgrade from 6.4 to
On 2019-05-09 13:53, Sebastian Benoit wrote:
bgpctl sh rib neigh out
for all neighbors.
All empty.
Also look at
bgpctl sh rib best
Completely empty.
if any routes are actually selected - maybe the "nexthop qualify via
default" isnt working.
I see two things...
1) when run as "bgpd -d
OK, I'm pretty sure this is a dumb question, but...
Does relayd work properly, or at all with pf disabled? (in 6.5-RELEASE)
It looks like it should as long as I use "relay" instead of "redirect",
but I'm having trouble, and don't want to keep banging my head against a
wall if it's something t
On 2019-05-14 15:42, Adam Thompson wrote:
OK, I'm pretty sure this is a dumb question, but...
Does relayd work properly, or at all with pf disabled? (in
6.5-RELEASE)
I have partially answered my own question. That last message was posted
prematurely, in more than one way, sorry!
1
FWIW, I also encountered some slightly different error messages, I'll see if I
can reproduce those.
-Adam
On May 14, 2019 4:48:29 p.m. CDT, Reyk Floeter wrote:
>
>> Am 14.05.2019 um 23:06 schrieb Adam Thompson :
>>
>>> On 2019-05-14 15:42, Adam Thompson wrote:
>
On 2019-05-22 09:25, mxb wrote:
I think FreeBSD or any Linux template will work just fine and add
vmxnet3.
However, last I checked (1year ago) vmxnet3 been less stable than
e1000 under pressure.
Don't use the Linux templates. I would recommend against using the
FreeBSD templates, and go with
I have a binary - built on this 6.5-STABLE amd64 system by an automatic
build process as part of a CPAN module installation, that will not
execute:
rt@rt$ /var/www/rt/local/plugins/RT-Extension-TicketPDF/bin/wkhtmltopdf
ksh: /var/www/rt/local/plugins/RT-Extension-TicketPDF/bin/wkhtmltopdf:
In
I've seen a large number failures recently from m:tier's openup tool,
complaining of:
ftp: connect: Host is down
!!! Cannot retrieve https://stable.mtier.org/openup
!!! Please verify your Internet connection, proxy settings and
firewall.
I'm seeing this from two different networks
On 2019-06-12 03:55, Ingo Schwarze wrote:
Even though su(1) can still be used today to relinquish privilege
when you are already root, no more development is done on it and people
rarely look at the manual page. The last time new functionality was
added to the su(1) manual page was almost a deca
On 2019-06-12 13:12, ¯\__/¯ ¯\__/¯ wrote:
I've search for the answer to this question, but I can't find it.
I also read the source code, but I still don't get how it works.
Help pl0x
Not sure exactly what you're looking for...
On modern architectures, most OSes (including OpenBSD) "walk the
h
I have RTFMed and googled, but I still canât figure out how to do one simple
thing: make security(8) ignore a single file that changes on a daily basis,
where that file is otherwise monitored due to /etc/mtree/4.4BSD.dist.
The file in question is /var/unbound/db/root.key, which I have auto-upd
: October 6, 2016 10:20
To: Adam Thompson
Subject: Re: security(8) question - how to skip a single file?
Hi Adam,
Not replying to list in case I did not understand the question.
I have the following towards the end of /etc/changelist
.
.
.
/var/nsd/etc/nsd.conf
# /var/unbound/etc/root.key
/var
On 2017-02-13 07:11, STeve Andre' wrote:
I'm puzzled and am asking for help. I'm attempting to install
the -current snapshot (feb 12) on a Dell precision t3500. The
install formats a 6T disk very quickly, like in 25 seconds. Hmm.
After installing the tar files, installboot fails with a
"Ba
On 2017-04-07 16:41, Mihai Popescu wrote:
I don;t want to offend you folks, but I'm curious and I will ask: is
this BSDCon so useful? Does it pay the efforts?
If someone has time and knowledge to do a PF tutorial he/she can do it
and post. Do you need the Con?
I'm asking this having in my mind
> -Original Message-
> From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On
> Behalf Of bytevolc...@safe-mail.net
> Sent: April 10, 2017 19:31
>
> > Plus, this year it appears that Peter is co-delivering the seminar
> > with Massimiliano Stucchi from RIPE, so it will presumably c
By definition, you will (probably) not be able to use the ACME protocol - it
only works (normally) when your system is connected directly to the public
internet with a static IP address.
Simply because you say "behind a corporate firewall", I already know (or at
least assume) that ACME will not
1 - 100 of 248 matches
Mail list logo
