On 11/8/2022 6:50 PM, latin...@vcn.bc.ca wrote:
Hello misc
Is there a problem installing Dovecot? Thanks
I have 2 VMs upgraded working correctly, this is a new installation of
Dovecot at Vultr.
# pkg_add dovecot
quirks-6.42 signed on 2022-10-30T18:56:25Z
Can't install dovecot-2.3.19.1p0v0
Only bnxt and mcx support 50. Intel chips that do are 800 series, beyond ixl.
On August 11, 2021 5:13:11 p.m. Chris Cappuccio wrote:
ha...@sdf.org [ha...@sdf.org] wrote:
> Hi folks!
>
> I wonder if OBSD supports 50Gbe network cards. And what is the cable
> standard to support such data
Hi William,
I would try posting what you have to the Dovecot mailing list and see what
Aki says.
On May 17, 2021 7:18:35 a.m. William Orr wrote:
Hey,
I have two mailservers running OpenBSD 6.9, and I use bidirectional
syncing of my maildirs through doveadm, part of dovecot. After the
On 11/16/2020 12:08 AM, Paul B. Henson wrote:
I just updated one of my servers running 6.7 to 6.8, and am having a
problem with openldap. I have the intermediate cert and root CA in a
file referenced by the openldap config:
TLSCACertificateFile/etc/openldap/cabundle.crt
Under 6.7 with the
On 10/22/2020 11:22 PM, Jonathan Gray wrote:
On Thu, Oct 22, 2020 at 10:37:31PM -0400, Brad Smith wrote:
On 10/22/2020 9:59 PM, Kevin Shell wrote:
Hello misc@.
I want to try out OpenBSD UEFI.
How to install OpenBSD with UEFI boot on qemu?
The installer does prompt you during disk setup
On 10/22/2020 9:59 PM, Kevin Shell wrote:
Hello misc@.
I want to try out OpenBSD UEFI.
How to install OpenBSD with UEFI boot on qemu?
The installer does prompt you during disk setup.
The install68.iso has no UEFI support.
This is not true.
My following command on Linux can't boot OpenBSD
On 01/01/15 17:14, Christian Weisgerber wrote:
My OpenBSD laptop, iwn(4), doesn't roam between my two access points.
It's a sorry sight when it struggles to push a signal through the
rebar floor instead of switching over to the other access point a
meter away.
Is this a limitation of OpenBSD's
On 12/18/14 13:57, Mike Larkin wrote:
On Thu, Dec 18, 2014 at 12:24:45PM -0600, Adam Thompson wrote:
On 14-12-18 12:06 PM, andrew fabbro wrote:
In short - the list of VPS providers who can support OpenBSD is actually
very big.
I have to take issue with that statement...
The list of VPS
On 12/15/14 23:48, Rod Whitworth wrote:
I have been trying out dovecot for some years and it has always had some irritating
bug or
limitation and I have seen a few gripes from others.
It seems to have been very quiet lately so I thought I'd have another attempt
to get it running
whilst
On 12/08/14 05:12, mxb wrote:
We have exactly this model.
tcpbench from base gave only around 340Mbit/s on those.
So CPU is probably one problem on those boards.
tcpbench done against 1U machines with better CPU and doing almost line rate on
1G NIC.
I didn't want to quote any particular
On 12/07/14 03:35, Riley Baird wrote:
As for why I want to create the distro, I think that OpenBSD has
excellent security, and I would like to create a version without the
binary-only microcode included.
Doesn't really make any sense why. But either way hopefully you're
not using common
On 12/07/14 04:29, Riley Baird wrote:
However, remember that if someone doesn't know much about OpenBSD, they
will either: a) think that OpenBSD does not contain binary-only firmware
due to the Blob-Busters marketing or b) not know where to look to
remove it should they wish to
Your
On 12/07/14 05:18, Riley Baird wrote:
On 07/12/14 20:52, Otto Moerbeek wrote:
On Sun, Dec 07, 2014 at 08:29:48PM +1100, Riley Baird wrote:
On 07/12/14 20:20, Dmitrij D. Czarkoff wrote:
Riley Baird said:
As for why I want to create the distro, I think that OpenBSD has
excellent security, and
On 12/07/14 21:18, Martin Hanson wrote:
I would like to be able to run ~100-120 MB/s from one NIC to the other
on this box, if possible?
The NICs should be fine but I'd be worried that even the -70 model
would be CPU limited for such throughput.
--
This message has been scanned for viruses
On 12/04/14 07:05, Alan McKay wrote:
On Thu, Dec 4, 2014 at 1:15 AM, Vivek Vinod vi...@icanconnect.com wrote:
We have been using Mikrotik routerboards since 7 years
Huh? With OpenBSD on them?
There are 3 PowerPC based RouterBOARDs. AFAIK the RB600 is supported
at the moment by the socppc
On 11/30/14 15:20, Ted Unangst wrote:
Examples:
treetykaveprethicooputhedu
soonataviceenoopatecoge
gootrozapiceelytrithunula
preezypeendothanundipeesooka
That defeats the purpose of the second example in the OPs question.
--
This message has been scanned for viruses and
dangerous content by
On 12/03/14 15:04, Ted Unangst wrote:
On Wed, Dec 03, 2014 at 08:27, Brad Smith wrote:
On 11/30/14 15:20, Ted Unangst wrote:
Examples:
treetykaveprethicooputhedu
soonataviceenoopatecoge
gootrozapiceelytrithunula
preezypeendothanundipeesooka
That defeats the purpose of the second example
On 11/27/14 10:57, David Unric wrote:
Hello,
I'd like to figure out what causes very low performance of disk operations
on my laptop.
I've tested it by unpacking gzipped tar archive (
http://ftp.heanet.ie/pub/OpenBSD/5.6/src.tar.gz) about 125 MiB big.
On the same machine, not cached, various
On 11/27/14 22:35, jungle Boogie wrote:
Hello All,
On 25 November 2014 at 12:52, Motty Cruz motty.c...@gmail.com wrote:
Hello all,
I am searching for hardware to build a router with OpenBSD. I have found
mixed signals as to fastest system with i386 or 64bit. I know in the past
i386 OpenBSD used
On 11/27/14 23:50, jungle Boogie wrote:
Hi,
On 27 November 2014 at 20:38, thev...@openmailbox.org wrote:
you can just use old hardware for these purposes.
from the man who literally wrote the book on pf (from pf tutorial via
http://home.nuug.no/~peter/pf/en/long-firewall.html):
I have
On 11/25/14 18:18, motty cruz wrote:
Thank you Juan,
I appreciate your suggestions and advice.
I am planning on using Dual socket B2 (LGA 1356) supports Intel® Xeon®
processor E5-2400 v2, I suppose i386 would perform better rather than 64bit
amd processor. Thank you again!
The amd64 arch
On 11/11/14 15:51, giacomo wrote:
Hi at all,
I try to compile postfix on OpenBSD 5.6 with command
# env FLAVOR=mysql sasl2 make install
for install it with mysql and sasl2 support. I have compiled it
in OpenBSD 5.5 and 5.4 without problem. My system is upgrated from 5.4 to 5.5
and to 5.6
The
On Sat, Nov 08, 2014 at 03:21:00PM -0600, Edgar Pettijohn wrote:
Is there an archive of the mailing list that is keyword searchable?
http://www.openbsd.org/mail.html
At the bottom of the page. The first two entries.
--
This message has been scanned for viruses and
dangerous content by
On 06/10/14 9:01 PM, Matti Karnaattu wrote:
Browsers are getting slower all the time.
Bullshit. Try this: http://peacekeeper.futuremark.com
Actually it isn't bullshit. It is the truth. You just fail to understand
what he means.
Newer browsers run software faster. Ancient browsers may even
On 15/09/14 12:42 PM, Kevin Chadwick wrote:
The pound man page says that OpenSSL requires access to /dev/urandom.
AFAIK that is a generic comment that isn't the case for OpenBSD.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
On 11/08/14 3:02 AM, Gustav Fransson Nyvell wrote:
Good thing OpenBSD didn't go down the multiple versions path.
The point of your sarcastic post is?
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
On 11/08/14 3:10 AM, Gustav Fransson Nyvell wrote:
On 08/11/14 09:04, Brad Smith wrote:
On 11/08/14 3:02 AM, Gustav Fransson Nyvell wrote:
Good thing OpenBSD didn't go down the multiple versions path.
The point of your sarcastic post is?
If I explain, will you ask what the point of my
On 11/08/14 3:16 AM, Gustav Fransson Nyvell wrote:
On 08/11/14 09:10, Brad Smith wrote:
On 11/08/14 3:10 AM, Gustav Fransson Nyvell wrote:
On 08/11/14 09:04, Brad Smith wrote:
On 11/08/14 3:02 AM, Gustav Fransson Nyvell wrote:
Good thing OpenBSD didn't go down the multiple versions path
On 17/07/14 7:24 PM, Edd Barrett wrote:
FWIW, I have the same here. I also notice that xdm did not start as it
usually does.
+1 I noticed the same issue the other day updating my systems.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be
On 14/07/14 12:09 AM, Johan Hattne wrote:
I would have expected to find unbound(8) on my 5.5 sgi machine, but I can’t and
neither can locate(1). Any clues as to what’s going on?
Unbound didn't exist with 5.5 so of course it won't be there.
--
This message has been scanned for viruses and
On 12/07/14 3:46 PM, Chris Cappuccio wrote:
Kevin Chadwick [ma1l1i...@yahoo.co.uk] wrote:
I'm guessing this is due to the new KMS 3d support not being as fast
right now but much better than you had before.
It also affects Thunderbird. Here's my synopsis of Mark Kettenis's
analysis:
The
On 05/07/14 8:01 PM, Predrag Punosevac wrote:
Franco Fichtner write:
I have immense respect for Matt as a user of his code since Amiga C
compiler. I probably speak for lots of people both in OpenBSD and
DragonFly camp if I say that I would prefer him to finish HAMMER2 and
leave concurrent
On 02/07/14 2:59 PM, Peter N. M. Hansteen wrote:
While I was shopping around for a new laptop to replace my aging
Thinkpad SL500 I noticed that the Thinkpad's /etc/firmware directory had
a file called iwn-7260, so when I couldn't get the Atheros AR9485
included in one recent laptop here to work
On 24/06/14 3:08 PM, Chris Cappuccio wrote:
Kapetanakis Giannis [bil...@edu.physics.uoc.gr] wrote:
On 23/06/14 21:33, Henning Brauer wrote:
* Chris Cappuccio ch...@nmedia.net [2014-06-23 20:24]:
I have a sandy bridge Xeon box with PF NAT that handles a daily 200
to 700Mbps. It has a single
On 21/06/14 3:21 PM, Edgar Pettijohn wrote:
On 06/21/2014 02:17 AM, Otto Moerbeek wrote:
On Fri, Jun 20, 2014 at 11:37:07PM -0500, Edgar Pettijohn wrote:
On 06/20/2014 11:20 PM, Edgar Pettijohn wrote:
On 06/20/2014 10:58 PM, Mike Bregg wrote:
On 2014-06-20 21:14, Edgar Pettijohn wrote:
On
On 17/06/14 4:56 AM, Mikolaj Kucharski wrote:
On Mon, Jun 16, 2014 at 11:07:39PM +0100, Kevin Chadwick wrote:
previously on this list Mikolaj Kucharski contributed:
by disabling mpbios on
OpenBSD and falling back to the old pic controller, in this case you
I cannot find how to enable 'the
On 14/06/14 6:00 AM, Otto Moerbeek wrote:
On Sat, Jun 14, 2014 at 09:44:29AM +, Stuart Henderson wrote:
On 2014-06-13, Rodrigo Mosconi open...@mosconi.mat.br wrote:
Unfortunately, I don`t manage the Host system. The freeze server is a vps
machine from arpnetworks...
You didn't mention
On 12/06/14 11:43 PM, Christian Pedaschus wrote:
On Tue, 10 Jun 2014 12:14:46 -0600
Theo de Raadt dera...@cvs.openbsd.org wrote:
I was reading stuff in misc@ about OpenSSL broken things. I see
people from OpenBSD started LibreSSL project and they are forking
OpenSSL and remove the bad code.
On 12/06/14 11:59 PM, Christian Pedaschus wrote:
On Thu, 12 Jun 2014 23:51:58 -0400
Brad Smith b...@comstyle.com wrote:
On 12/06/14 11:43 PM, Christian Pedaschus wrote:
wouldn't it be a feature?
less warts, less bugs, less features, less compatible, but secure?
What good is having a brand
On 06/05/14 7:52 AM, Isak Lyberth wrote:
I am thinking Intel ET Quadport gigabit server cards
What about them? You need to be more forthcoming with
the details and what it is that you're after.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed
On 02/05/14 10:24 AM, Peter J. Philipp wrote:
On 05/02/14 16:13, Stefan Sperling wrote:
OpenBSD doesn't support IPv6 autoconf on routers (i.e if forwarding
is enabled). Some ISPs have started using autoconf to assign a
global prefix for use on the WAN link. This violates early IPv6 RFCs
which
On Sun, Apr 20, 2014 at 12:08:23PM +0200, St?phane Guedon wrote:
Hello
Is there anybody who has successfully set up xbmc on openbsd.
I do not see any official port in the port tree, but is there a non
official ?
I had started and had something sorta running but without sound.
It required
On 08/04/14 6:53 PM, consultor wrote:
On 04/08/2014 10:31 AM, Ted Unangst wrote:
On Tue, Apr 08, 2014 at 11:19, Jack Woehr wrote:
http://www.itnews.com.au/News/382068,serious-openssl-bug-renders-websites-wide-open.aspx
accurate w/r/t 5.3?
5.3, 5.4, and 5.5 are all affected. only 5.2 and
On 31/03/14 1:34 PM, Craig R. Skinner wrote:
A few updates for the page: http://www.OpenBSD.org/users.html#isp
* Fix broken Swebase link.
* Add Devio.us
* Add Grex
* Add Polar Home
It looks like Reverse.Net should be removed. Their website makes
it pretty clear they don't run OpenBSD
On 27/03/14 3:40 AM, Remi Locherer wrote:
I tried an Edimax USB Ethernet adapter on my -current system. It
attaches as ugen1 but not as axen0:
ugen1 at uhub3 port 2 ASIX Elec. Corp. AX88179 rev 2.10/1.00 addr 3
According to axen(4) this device should be supported. But config does not
find
On 04/03/14 5:24 PM, Theron ZORBAS wrote:
Hi,
I've just checked out from openbsd official cvs with -rOPENBSD_5_5 tag.
Then followed procedure from faq5/building from source.
It failed after make
release command; here is the output:
[..]
ld -Ttext
0x810001e0 -e
On 01/03/14 10:41 AM, Scott Vanderbilt wrote:
On 3/1/2014 12:06 AM, Remco wrote:
I just upgraded a machine from source today.
Using snapshots might be a safer bet, unless you have good reason to use
sources instead.
Thank you for your reply.
I had to do a source update as this host is at
On Mon, Feb 10, 2014 at 01:20:46PM -0500, Kenneth Westerback wrote:
On 10 February 2014 13:11, RD Thrush openbsd-m...@thrush.com wrote:
With a somewhat recent i7 desktop, using startx, X seems to run ok;
however, at 1024x768 rather than the expected 1920x1200 resolution.
ctl-alt-keypad+
On Sat, Feb 08, 2014 at 08:35:41PM +0100, Antoine Jacoutot wrote:
On Sat, Feb 08, 2014 at 07:17:41PM +, openda...@hushmail.com wrote:
Hello,
Are OpenBSD's packages extremely outdated? What would you say to this
guy?
At least with Linux I don't have to wait 6 hours for all my
On 07/02/14 8:46 AM, Kapetanakis Giannis wrote:
On 07/02/14 01:54, Chris Cappuccio wrote:
This is probably the time where most people would recommend against
that since it is essentially a complete reinstall of all items to upgrade
from pre-5.5 to 5.5 due to time_t ABI change.
Chris
Sorry
On 06/02/14 9:25 AM, Alexey Suslikov wrote:
Brian Curran brian at brianpcurran.com writes:
when it stops passing traffic, does issuing ifconfig urtw0 scan help?
I test this just now and it seemed to help, although I only started
seeing ping replies about 10 seconds after issuing the scan.
On 06/02/14 12:45 PM, L. V. Lammert wrote:
On Thu, 6 Feb 2014, Chris Cappuccio wrote:
I don't see why everyone recommends install one version at a time.
It's not a recommendation, it is reality. Each upgrade is based on the
previuos version - skipping versions is not supported.
There is a
On 02/02/14 1:50 PM, Adam Jensen wrote:
On Sun, 2 Feb 2014 18:18:06 + (UTC)
na...@mips.inka.de (Christian Weisgerber) wrote:
Miod Vallat m...@online.fr wrote:
i386-donatetoopenbsdfoundationtoday-openbsd5.4?
or i386-bikeshed-openbsd.
What is the string equivalent of goatse or tubgirl?
On 01/02/14 11:18 PM, Adam Jensen wrote:
On Sat, 01 Feb 2014 22:06:47 -0500
Ted Unangst t...@tedunangst.com wrote:
Well, that's true. If the admin cares about the value in
X-Mailer, the admin should configure a better value.
Patching the various occurrences of this string might be more
On 04/12/13 4:44 PM, Vadim Zhukov wrote:
2013/12/5 Peter Fraser p...@thinkage.ca:
samba required the e2fsprogs package. The problem occurs when trying to use
samba's net command.
The net command requires libuuid.
It was not easy to find where libuuid was located.
pkg_locate libuuid.so -
On 04/12/13 5:23 PM, Christian Weisgerber wrote:
Brad Smith b...@comstyle.com wrote:
pkg_locate libuuid.so - no?
Even if that tool was installed that would not locate anything
if the package in question is not already installed, right?
Wrong.
How does it find the file
On 04/12/13 5:37 PM, Philip Guenther wrote:
On Wed, Dec 4, 2013 at 2:29 PM, Brad Smith b...@comstyle.com wrote:
On 04/12/13 5:23 PM, Christian Weisgerber wrote:
Brad Smith b...@comstyle.com wrote:
...
Even if that tool was installed that would not locate anything
if the package in question
On 24/11/13 2:40 PM, David Keller wrote:
Hello,
***
* My setup
Say I have a router using pppoe to connect to internet.
It gets a different ip address from the ISP every day.
From this router I want to create a gif tunnel to a static-ip host.
***
* My problem
How can
On 21/11/13 2:15 PM, za...@gmx.com wrote:
On 2013-11-21 20:04, Gilles Chehade wrote:
On Thu, Nov 21, 2013 at 08:02:06PM +0100, za...@gmx.com wrote:
Different people have different concepts of morality. I believe it
would be better to remove anything that is controversial, for
whatever reason
On 20/11/13 3:11 PM, Dan Shechter wrote:
Hi All,
Running OpenBSD in VMWare workstation 10.
OpenBSD 5.4 amd64 do not recognize VMXNET3, but it does recognize VMXNET:
VMware Virtual VMXNET3 rev 0x01 at pci3 dev 0 function 0 not configured
Am I doing something wrong?
Yes, your expectation.
On 04/11/13 6:22 PM, STeve Andre' wrote:
Sometime between Oct 18th and now I've lost the ability to do a
dhcp request at boot time. Dropping back to the Oct 18 kernel
fixes things so I don't have hardware problems.
When I attempt to do a dhclient em0 I get
DHCPREQUEST on em0 to
On 02/11/13 11:57 AM, Gilles Cafedjian wrote:
Hello
I think vesa driver allow only built-in resolution of your bios.
I saw in my Xorg.0.log:
...
(II) VESA(0): Not using mode 1440x900_60.00 (no mode of this name)
...
(--) VESA(0): Virtual size is 1024x768 (pitch 1024)
(**) VESA(0): *Built-in mode
Hi,
I added an entry to want.html as I am looking for a laptop to replace
the laptop I have at the moment which has some really bad heat related
issues and I have been hobbling along with it for awhile now. I am in
the Toronto area. I thought I would post to misc@ for some greater
exposure.
On 07/10/13 9:57 PM, noah pugsley wrote:
Slander aside, pretty cool news. I do have one stupid question though,
what does the 'yy' in yycix stand for?
It is not YY it is YYC. It is an airport code.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
On 23/09/13 11:07 PM, Fung wrote:
in current snapshots
install pure_ftpd
default /etc/rc.d/pure_ftpd is
---
#!/bin/sh
#
# $OpenBSD: pure_ftpd.rc,v 1.1 2011/04/25 09:26:47 sthen Exp $
daemon=/usr/local/sbin/pure-ftpd
daemon_flags=-A -B -H -u1000
. /etc/rc.d/rc.subr
pexp=pure-ftpd: -pure-ftpd
On 21/09/13 12:04 AM, Johan Huldtgren wrote:
This is a virtual machine, isn't it? AFAICS, virtual machines can't
do full duplex, while eap(4) cards claim they are full-duplex.
Correct, it's a virtual machine.
Could you add -mplay to the sndiod_flags variable in
/etc/rc.conf.local (or
On 17/09/13 2:12 PM, Nick Holland wrote:
On 09/17/2013 01:41 PM, Andy wrote:
On Tue 17 Sep 2013 18:09:15 BST, Michael Chen wrote:
I'm considering bidding on this 48-core box:
On 13/09/13 1:13 PM, Jim MacKenzie wrote:
-Original Message-
From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf
Of David Coppa
Sent: Friday, September 13, 2013 10:14 AM
To: Jim MacKenzie
Cc: misc
Subject: Re: GCC 2.95 mention in intro(3)
I think the GCC 2.95 line is
On 10/09/13 6:10 PM, Gregor Best wrote:
On Tue, Sep 10, 2013 at 05:40:19PM -0400, Jeffrey Walton wrote:
[...]
Does anyone have a C++ compiler recommendation for OpenBSD?
[...]
What about GCC? Clang++'s C++11 support is spotty at best, at least it
was the last time I tried.
Clang's C++11
On 10/09/13 6:20 PM, Jeffrey Walton wrote:
On Tue, Sep 10, 2013 at 6:10 PM, Gregor Best g...@ring0.de wrote:
On Tue, Sep 10, 2013 at 05:40:19PM -0400, Jeffrey Walton wrote:
[...]
Does anyone have a C++ compiler recommendation for OpenBSD?
[...]
What about GCC? Clang++'s C++11 support is
- Original message -
As far as I know X540-T2 out on the market don't do PCI 3.0.
Cards I have are PCI 2.1, this means (if I remember my calculations
right) this 10G card is caped by PCI bus - 6G max. Basically Intel sells
10G which is caped up to 6G. and this is for the single port.
On 03/07/13 11:07 PM, openda...@hushmail.com wrote:
Why do we need FUSE anyway?
To be able to utilize FUSE based filesystems.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
On 23/06/13 3:59 PM, Denis Fondras wrote:
Hi all,
Le 22/06/2013 03:28, Brad Smith a écrit :
On 13/06/13 7:53 AM, Gregor Best wrote:
Hi list,
recently, I've been playing around a bit with IPv6, and IPv6-only
networks. While doing that, I have not found an automated way to add
nameservers
On 13/06/13 7:53 AM, Gregor Best wrote:
Hi list,
recently, I've been playing around a bit with IPv6, and IPv6-only
networks. While doing that, I have not found an automated way to add
nameservers announced via router advertisements.
dhclient does that for IPv4 but the rtsol in OpenBSD doesn't
On Sun, Mar 24, 2013 at 01:10:25PM +1100, Brett Mahar wrote:
On 03/24/13 08:00, Ted Unangst wrote:
On Sun, Mar 24, 2013 at 00:39, Brett Mahar wrote:
Hi,
Now that the KMS stuff has arrived (thanks for that!), I'm looking at
this device from Shuttle http://axcco.com/xs35v3.html. It has an
On Sun, Mar 17, 2013 at 07:46:34PM +1100, John Tate wrote:
I had a problem building something in ports ports with a default 2.0gb
/usr. I tried moving ports to /home/usr/ports to /usr/ports but I get...
Fatal: /usr/ports is a symlink. Please set to the real directory
Don't try to make a
On Wed, Mar 06, 2013 at 02:10:45PM +0100, Dmitrij D. Czarkoff wrote:
On Tue, Mar 05, 2013 at 06:53:43PM -0500, Brad Smith wrote:
. It'll be a lot easier to have an HTML5
compliant browser with support for WebRTC all over the place then it will
be to get some
On Wed, Mar 06, 2013 at 06:33:04PM -0800, patrick keshishian wrote:
On Wed, Mar 6, 2013 at 6:13 PM, Brad Smith b...@comstyle.com wrote:
On Wed, Mar 06, 2013 at 02:10:45PM +0100, Dmitrij D. Czarkoff wrote:
On Tue, Mar 05, 2013 at 06:53:43PM -0500, Brad Smith wrote
On Wed, Mar 06, 2013 at 12:10:18PM -0430, Andres Perera wrote:
i don't think it's as drastic as that
if you buy a Clarkdale cpu you're good to go
these came out ~2010, they are still modern
The issue isn't the CPU but the GPU and the GPUs in question come with
Sandy Bridge/Ivy Bridge based
On Tue, Mar 05, 2013 at 10:25:31PM +0100, Pau wrote:
Hi,
I have been searching but could not find information in this respect.
I have 5.2 installed on a thinkpad x220s and, while ekiga seems to work
fine, I have not found a way to make empathy or pidgin work with a gtalk
account.
The
On Tue, Mar 05, 2013 at 04:46:04PM -0500, Brad Smith wrote:
On Tue, Mar 05, 2013 at 10:25:31PM +0100, Pau wrote:
Hi,
I have been searching but could not find information in this respect.
I have 5.2 installed on a thinkpad x220s and, while ekiga seems to work
fine, I have not found
On Tue, Mar 05, 2013 at 02:47:47PM -0800, patrick keshishian wrote:
On Tue, Mar 5, 2013 at 1:58 PM, Brad Smith b...@comstyle.com wrote:
On Tue, Mar 05, 2013 at 04:46:04PM -0500, Brad Smith wrote:
On Tue, Mar 05, 2013 at 10:25:31PM +0100, Pau wrote:
Hi,
I have been searching but could
On Wed, Mar 06, 2013 at 07:36:58AM +0100, Matthieu Herrb wrote:
On Mon, Mar 04, 2013 at 03:30:54PM +, Kevin Chadwick wrote:
I was about to buy two thinkpads which are often suggested when the
OpenBSD laptop question is raised but the 93 in stock have disappeared
since saturday, aaargh.
On Tue, Mar 05, 2013 at 11:00:01PM -0800, patrick keshishian wrote:
On Tue, Mar 5, 2013 at 10:53 PM, Brad Smith b...@comstyle.com wrote:
On Wed, Mar 06, 2013 at 07:36:58AM +0100, Matthieu Herrb wrote:
On Mon, Mar 04, 2013 at 03:30:54PM +, Kevin Chadwick wrote:
I was about to buy two
it.
In the ports tree there are 6 versions:
d530# cd automake
d530# ls
1.10 1.12 1.8 CVS Makefile.inc
1.11 1.4 1.9 Makefile
Alan
On 3/4/13, Brad Smith b...@comstyle.com wrote:
On Mon, Mar 04, 2013 at 01:04:51AM -0500
On Mon, Mar 04, 2013 at 01:04:51AM -0500, Alan Corey wrote:
I'm defining
setenv AUTOMAKE_VERSION 1.11.5
In my .cshrc, I don't know why exactly.
The value should be 1.11 not 1.11.5.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
On Sat, Mar 02, 2013 at 07:25:18PM -0600, Brandon Tanner wrote:
By the way, does softraid on amd64 support 4096 bytes per sector?
No matter what the architecture is softraid to date does not support
devices with anything other than 512 bytes/sector.
--
This message has been scanned for viruses
On Sun, Feb 17, 2013 at 11:03:44PM +0100, mxb wrote:
I think this is on TODO-list. This is why npppd considered to be not ready
and thus not linked to build.
It is linked to the build and has been for 5 months.
--
This message has been scanned for viruses and
dangerous content by
- Original message -
Hi
For the last few months i've been following -current using snapshots.
I see on the ftp mirrors that 5.3 is now there. This is probably a
stupid question but is it the same process for upgrading to the 5.3
snapshot as it has been with the 5.2 snapshots? Is
On Sun, Jan 27, 2013 at 05:20:14AM -0500, Jiri B wrote:
Hello,
I'm confused, how is it possible I have two files with same
names in one dir?
$ ls -li
total 1245376
3611817 -rw-r--r-- 1 jirib jirib 168392755 Jan 14 23:35
Crostata_Alla_Fruta.mp4
3741698 -rw-r--r-- 1 jirib jirib
- Original message -
Thanks Peter. I found that many autotools packaged programs out there
expect newer gcc environments.
I'd love to what programs these are. I haven't run into these many programs,
only a very small few.
--
This message has been scanned for viruses and
dangerous
- Original message -
- Original message -
Thanks Peter. I found that many autotools packaged programs out there
expect newer gcc environments.
I'd love to what programs these are. I haven't run into these many
programs, only a very small few.
love to know*
--
This
On Wed, Jan 23, 2013 at 08:43:36AM +0800, Salil Wadnerkar wrote:
Hi,
On my amd64 machine, firefox crashes regularly after some time.
Here is the info about the crash:
gdb /usr/local/bin/firefox firefox.core
GNU gdb 6.3
This GDB was configured as amd64-unknown-openbsd5.2...(no debugging
On Tue, Jan 22, 2013 at 09:25:04AM +0500, ??? wrote:
Hello!
I'm investigating how program should set cpu affinity, is there any
examples ? (I didn't find any except the commit that adds cpu affinity
thing, but there's no user space documentation, no utility, no man page).
As far as
On Sun, Jan 20, 2013 at 03:43:22PM +0200, Ivo Chutkin wrote:
Hello,
I am trying to build -current from 5.2 beta from Jul 1 but getting
the following error:
{standard input}: Assembler messages:
{standard input}:105: Error: no such instruction: `rdrand %rbx'
*** Error code 1
Stop in
On Thu, Jan 17, 2013 at 03:57:48PM +0100, Janne Johansson wrote:
2013/1/17 WANG Siyuan wangsiyuanb...@gmail.com:
Hi,
I install gcc 4.7 on openbsd using pkg_add. after installation, I use
'gcc -v' to check, I found it is also gcc 4.2 !
how to upgrade gcc 4.2 to gcc 4.7 on openbsd? thank
On Mon, Jan 14, 2013 at 09:32:57AM +, Jamie Paul Griffin wrote:
Hi
I recently upgraded my system to the Dec 21 snapshot, will be updating again
to the Jan 09 snapshot; but, I noticed an error message in /var/log/messages
yesterday when I rebooted my machine:
Jan 13 21:16:43
On Sun, Jan 13, 2013 at 11:54:05AM +, Stuart Henderson wrote:
It doesn't need to actually be built with support for threads, just to
be linked with -lpthread.
It doesn't but there is no point putting the effort in and not doing so.
I have run into a few Perl projects over the years that do
- Original message -
http://www.openbsd.org/cgi-bin/cvsweb/src/etc/login.conf.in
http://www.openbsd.org/cgi-bin/cvsweb/src/etc/mklogin.conf
http://www.openbsd.org/cgi-bin/man.cgi?query=login.confsektion=5
plus, last i checked, firefox was not even 64-bit friendly anyways
You're
- Original message -
El Fri, 4 Jan 2013 08:08:24 +0100
Tomas Bodzar tomas.bod...@gmail.com escribió:
On Thu, Jan 3, 2013 at 8:15 PM, Andriy Samsonyuk
andriy.samson...@ch.tum.de wrote:
On Thu, Jan 03, 2013 at 06:40:39PM +0100, Jes wrote:
And probably no power on usb ports
1 - 100 of 112 matches
Mail list logo
