[no subject]

Hi All, I am using the SNMPD master and subagent for private MIBs and would like to know if private data can be transmitted to the subagent along with the set/get request data. Specifically, during an SNMP query, I need to pass a unique string token from SNMPD to the subagent along with the get

[no subject]

Hi All, I am learning about the AgentX subagent to support SNMPGET/SNMPSET. Kindly provide clarification for the below queries: 1. Do I need to use both --with-agentx and --with-mib-modules="agentx" in Net-SNMP to have AgentX support? 2. I am following http://www.net-snmp.org/tutoria

[no subject]

Hello!   In our project we use net-snmp 5.7.3 and we are going to migrate to 5.9.4. And the main issue for our project during migration as I could see is that previously we used authProtocol MD5 for authentication of SNMP users. And the support of MD5 authProtocol was removed from 5.9.4. So plea

[no subject]

Hi , I am using net-snmp-5.9 (centos)and tried following command. Wireshark says 'Decrypted data not formatted as expected'. [Attached snapshot wireshark.jpeg] Used same snmpv3 credentials used at agent and wireshark . snmptrap -v 3 -n "" -a MD5 -A mypassword -x AES192 -X mypassword -l authPr

[no subject]

does snmpget (with netsnmp library) compare the src IP of the source ip of response pkt to the dest IP of the request packet? I have made changes for snmp response from a source ip, but on verifying the changes am getting a timeout error. How can we verify the changes without a timeout error. ro

[no subject]

Hi, To get rid of this user, you have to first stop snmpd, edit the first config file (usually /etc/snmp/snmpd.conf) to remove the username line, then edit the second file (usually /var/lib/snmp/snmpd.conf) to remove the lines with that username. People commonly forget to stop snmpd and do not loo

[no subject]

Hi , I am configured snmp v3 but I am getting the error snmp unknown username.please help me Thanks, Uma -- ___ Net-snmp-coders mailing list Net-snmp-coders@lists.sourceforge.n

[no subject]

Hello Sir, Need your help... I am using net-snmp-5.7.2.rc1 in organization which is handling thousands of users. For getting interface wise data I am doing following snmpwalk -v 2c -c public 127.0.0.1 1.3.6.1.2.1.2.2.1.10.1 IF-MIB::ifInOctets.1 = Counter32: 20709544 In my Linux Server th

[no subject]

Hello sir, I want to know that how can I configure mymib.c and mymib.h file in to my system. Without main() function they r giving compilation error. And than also I can not configure this files in to my system.. I have attached my ionline.c file with it.kindly reply me.

[no subject]

Hi All, To reproduce an issue ,we want to introduce delay on how Switch(SNMP agent) responds when SNMP calls are made from our SNMP manger. Is there any config change will do it from switch/agent side. Your Help will be highly appreciated.. Thanks, Naju.. -

[no subject]

http://ugetam.com.tr/reosdn.php?cwnd=hanbjpd-- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions w

[no subject]

Now Your All Dreams Will Going To Become Reality, with This Easy System To Make Moneyhttp://www.rato-kotztuete.de/breakingnews/90RichardSmith/";>http://www.rato-kotztuete.de/breakingnews/90RichardSmith/ -- Live Security Vi

[no subject]

http://wiltoninsider.com/drupal/sites/default/cvlr.php?rgs=glyo.ryo&dd=rd.vgvs&dj=groj-- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and h

(no subject)

Turn your computer into making money machine. http://crouic5webserver.com/httpszgexzqo2.php?ufjfriend=564 _ But Jim was dead against it at first. brighton wilson Mon, 14 May 2012 11:58:55 -- Liv

[no subject]

http://isouth.org/wp-content/themes/qi/mmdl.html?zxl=ttvtee.cpew&eqa=cqae.uupet&tty=jyxe-- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and

[no subject]

http://www.lakeshelbyvillemuskie.com/wp-content/themes/atahualpa/thjfle.html?ggp=fvtee.fhe&yd=rog.gg&swef=mhgy-- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat lan

[no subject]

http://www.lakeshelbyvillemuskie.com/wp-content/themes/atahualpa/thjfle.html?ggp=fvtee.fhe&yd=rog.gg&swef=mhgy-- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat lan

[no subject]

http://toning.dealtack.com/wp-content/plugins/WPRobot3/images/eyfme.html?dkt=ic.jag&mny=hjmg.hkm&dhi=jjbs-- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscap

[no subject]

http://ebayacc.com/ebaytools/33/upload/bdata/ebaytool08_20110820060930/rmngl.html";> http://ebayacc.com/ebaytools/33/upload/bdata/ebaytool08_20110820060930/rmngl.html-- For Developers, A Lot Can Happen In A Second. Bounda

[no subject]

http://ultimateairinc.com/php-oak/themes/global/admin_images/Blog/mcith/fjgvkd.html";> http://ultimateairinc.com/php-oak/themes/global/admin_images/Blog/mcith/fjgvkd.html-- Better than sec? Nothing is better than sec when

[no subject]

http://replica2011.info/wp-content/plugins/extended-comment-options/jrklre.html";> http://replica2011.info/wp-content/plugins/extended-comment-options/jrklre.html-- Better than sec? Nothing is better than sec when it come

[no subject]

http://bluray.net.in/wp-content/plugins/extended-comment-options/02efpk.html";> http://bluray.net.in/wp-content/plugins/extended-comment-options/02efpk.html-- Better than sec? Nothing is better than sec when it comes to m

[no subject]

Hi, We created support of UDP-ping for DISMAN, and a patch which gives the ability to use IP addresses in binary format, instead of string-like. Does this features have a chance to be included in mainstream? Thanks -- Thi

[no subject]

how does get work? how to get data from agent by snmpget or snmpgetnext? 2011-08-22 chulk -- uberSVN's rich system and user administration capabilities and model configuration take the hassle out of deploying and man

[no subject]

Hello, As I can know that a MIB has a format compatible with Net-snmp, which is the structure of MIB definitions, which is required to validate the correct construction of the MIB, anther conpilar with Net-snmp. As validated with a platform provider that the mib is valid, and to compile correctly

[no subject]

www.qqa4.MEDICINE-CO.com _ Climate, controversies and the changing signatures of nature http://green.in.msn.com/--

[no subject]

www.qgs9.HEALTH-ONLINE-COM.com _ South Cinema This Decade http://entertainment.in.msn.com/southcinemathisdecade/-- _

[no subject]

http://videomeanwhilestc9.webs.com?Gzh7o4kh _ South Cinema This Decade http://entertainment.in.msn.com/southcinemathisdecade/---

[no subject]

http://onlykerrypgiv0.webs.com?Gzgo7t9 _ The amazing world in sharp snaps http://news.in.msn.com/gallery/archive.aspx---

[no subject]

Can we create a table with in a table. Example:- +---xTable(1) | +---xEntry(1) |---Index: xIndex | +-- --- Integer32 xIndex(1) |Range: 1..15 +-- -RW- Stringabc(2) +-- .. +-- . +-- . +-- -RW- Integer32 xyz(

[no subject]

Hello, We are trying to write a Linux application that polls network devices and writes the responses to a .csv file on the local hard drive. Also, we need the input parameters to Net-SNMP to come from a separate config file. Lastly, there is a requirement to run multiple queries in just one soc

[no subject]

Hi I compiled netsnmp with the given options as below. ./configure --with-mib-modules="smux" --build=i686-linux --host=arm-linux --with-endianness="little" --disable-manuals --disable-des --disable-md5 --disable-privacy --disable-debugging --disable-snmptrapd-subagent --disable-scripts --di

[no subject]

I have been searching MIBs as well as the internet trying to determine whether the UNITS clause in the MIB syntax must be populated with specific standard values or whether I can put any type of unit value in there myself?   Will someone answer this question for me please and/or provide me a lin

[no subject]

Dear Mr.expert: I am a programmer working on the snmp protocol, I am willing to understand the protocol as deeply as I can, and that is why I am working on studing net-snmp code，which is achieved by your coders,by the way,which is a very meaningful work for your expert to accomplish. Thank y

[no subject]

Hi All, We are using net-snmp5.1.2 in timesys distribution on powerpc target. Here with i have attached my file,we are using the SNMP agent ,external to the system. We created the thread , which calls the master agent. We observed that, when ever we restart the application.we need to restart t

[no subject]

I'm just a beginer with net-snmp. I want to write a subagent that will sent a trap as a response to SET command. I follow the tutorial from www.net-snmp.org. My subagent works: I can SET/GET data, but I don't know how to catch SETs so I could sent a trap. Could you help me with some example that s

[no subject]

i tried running the snmpget by removing -IR but I cameout with the following error. ./snmpget localhost public .1.3.6.1.2.1.1.3.0 Cannot find module (IP-MIB): At line 0 in (none) Cannot find module (IF-MIB): At line 0 in (none) Cannot find module (TCP-MIB): At line 0 in (none) Cannot find module

[no subject]

Hi, I need to propose the system, what will redistribute users among access point. In case that some of AP is overloaded, system will recognice it and reconnect host of the AP to another less loaded AP. The system supposed to be based on SNMP. I\'ve tried to find such variables in MIBs of acce

[no subject]

Hello,  I extent agent under windows xp, when I ran mib2c error is happened,  how to install perl module.   ERROR: You don't have the SNMP perl module installed.  Please obtain this by getting the latest source release of the net-snmp toolkit from http://www.net-snmp.org/download/ .  O

[no subject]

Title: Message    Hi!  > what does "ls -l snmpd" display?     ls -l snmpd  displays "ls: snmpd: No such file or directory" when i gave space betw

[no subject]

Greetings fellow net-snmp'ers. I have found sound interesting behavior with the hrStorage table for which I'm seeking commentary. Turns out that when mount points change dynamically, there is a problem with how the hrStorage table reports these mount points. The following scenario describes m

[no subject]

Currently we have two different management interfaces - CLI and SNMP. The managed data is stored in our backend code that is common to both CLI and SNMP. However, I would not like to expose my managed data directly to the SNMP subagent. So, we have an API exposed to the SNMP. In this context,

Re: (no subject)

[EMAIL PROTECTED] wrote: If i run snmpwalk with a big timeout to any oid that makes snmpwalk perform a get-next to the 5 scalar objects i have in my MIB, my subagent dies after returning three of them, and without giving any error. [...] I think it's quite easy to recreate the situation, but if

(no subject)

Hi, I'm using net-snmp version 5.1.2, as it's the one supported by RedHat RHEL4, but it behaves the same with 5.2.2 on Suse 10. I've created an AgentX subagent with a MIB that has 5 scalar counters. I'm using the code generated by mib2c.scalar.conf and in the generated code i've completed the hand

(no subject)

Hi, I wanted to implement a delay if somebody does snmpget on an oid 1.3.6.1.2.1.1.5.0. So I copied the following code from delayed_instance.c. I run this code and run snmpget command this oid, I cant see any delay. Can somebody help me in implementing this? -

(no subject)

Example of read and write on tables MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.2.3 / FreeBSD-4.9 X-Originating-IP: 10.1.1.2 Hi. I have been looking for a complete example to read an write in a mib i

(no subject)

Hello, I got some problems with "net-snmp-5.1.3.1" compilation on "HP-UX B.11.00 U 9000/800 ". I tried to configure it with - aCC: HP ANSI C++ B3910B A.03.27 and - gcc 3.0.1 but the result is always the same. The make output is the following: --

Re: (no subject)

hmmm.. i am in a spot. Anyways thank you for the answers.     On 10/13/05, Dave Shield <[EMAIL PROTECTED]> wrote: On Wed, 2005-10-12 at 12:58 +0530, Bharat Shetty wrote:> 1) the reason i ask this question (effect on static routes over > serial) is that when i do a "ping" on the target address(goes

Re: (no subject)

On Wed, 2005-10-12 at 12:58 +0530, Bharat Shetty wrote: > 1) the reason i ask this question (effect on static routes over > serial) is that when i do a "ping" on the target address(goes thru) > and subsequently check the arp cache, i find no entries. Then that's a question for the kernel people, n

Re: (no subject)

1) the reason i ask this question (effect on static routes over serial) is that when i do a "ping" on the target address(goes thru) and subsequently check the arp cache, i find no entries. neither do i find these addresses in the atTable of the router. Now does it matter?   2) The consequence of b

Re: (no subject)

On Sun, 9 Oct 2005 15:04:58 +0530 Bharat wrote: BS> 1)What is the effect of configuring static routes over serial ip on the arp BS> cache/atTable? I don't see why it would matter where the configuration came from. BS> 2) in mib2 rfc(1213) i noticed BS> ipRouteNextHop OBJECT-TYPE BS> SYNTAX IpAd

(no subject)

Hi snmp gurus,   I have two questions: 1)What is the effect of configuring static routes over serial ip on the arp cache/atTable? 2) in mib2 rfc(1213) i noticed   ipRouteNextHop OBJECT-TYPE  SYNTAX  IpAddress  ACCESS   read-write  STATUS  mandatory  

RE: Calculating CPU (was: no subject)

rom: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 20, 2005 11:24 PM To: net-snmp-coders@lists.sourceforge.net Cc: [EMAIL PROTECTED] Subject: (no subject) Hi, I have a problem to calculate percentage cpu usage in linux. As I know that I can calculate the the perc

(no subject)

Hi all,   I have some problem in getting values from hrStorageTable  in suse 9.0(kernel 2.6, net snmp 5.1). Snmp is not giving values of storage size and storage used. These OID are not even appearing in the displayed list.   Can anyone help me out in this regard….       Gyan R

(no subject)

Hi, I have a problem to calculate percentage cpu usage in linux. As I know that I can calculate the the percentage by this formula,   long cpu_diff_total =             diff( cpu_user1, cpu_user2 ) +             diff( cpu_syst1, cpu_syst2 ) +             diff( cpu_nice1, cpu_nice2 ) +

(no subject)

Please exit me from this list. thanks Eldar --- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Proje

RE: (no subject)

On Tue, 2005-08-23 at 23:56 +0800, Goh, Yen Mei wrote: > Thanks for your quick response; may I know when the bug is > likely going to be fixed? Once again, thanks. No idea. When someone provides a fix! If this is causing you major problem, then you've got the source, so are perfectly free to try

RE: (no subject)

On Tue, 2005-08-23 at 01:20 +0800, Goh, Yen Mei wrote: > I am using net-snmp for my project; I found that there was case > sensitive for the input that I passed. Is there any way to ignore the > case for the input in my command line without making change in our MIB > file? No. MIB object names ar

RE: (no subject)

Hi net-snmp support,   I am using net-snmp for my project; I found that there was case sensitive for the input that I passed. Is there any way to ignore the case for the input in my command line without making change in our MIB file?   Eg: Mib file can only recognize cmmDeviceID, so, i

RE:(no subject)

:08030295183 Ext :15183 Mobile  : (+91) 9886812502       Date: Fri, 17 Jun 2005 16:20:59 -0500 From: "Wang Yinyan-AYW003" <[EMAIL PROTECTED]> To: <net-snmp-users@lists.sourceforge.net> Subject: (no subject)   I downloaded source code of  net-snmp-5.2.1 and extracted a

RE: (no subject)

@lists.sourceforge.netSubject: (no subject) Hi i had install net-snmp 5.2.1 in Fedora Core 2.6.9 (Redhat Linux). I done that. When i try to install perl from /perl directory my "make test" giving followin error. How i can solve this.[EMAIL PROTECTED] perl]# make testmake[1]: Entering

(no subject)

Hi i had install net-snmp 5.2.1 in Fedora Core 2.6.9 (Redhat Linux). I done that. When i try to install perl from /perl directory my "make test" giving followin error. How i can solve this. [EMAIL PROTECTED] perl]# make test make[1]: Entering directory `/root/guides/net-snmp-5.2.1/per

Re: (no subject)

On Wed, 8 Jun 2005 13:32:26 +0800 Goh, wrote: GYM> My problem was the snmptrapd stopped by itself after certain period, may GYM> I know why? Is there any timeout for the snmptrapd that caused the GYM> process killed/stopped by itself? Anyway to make snmptrapd to run GYM> continuously without any in

Re: (no subject)

On Mon, 07 Mar 2005 16:06:12 +0530 Bhaskar wrote: B> 1. Modified ip.c file to make sure that IP sub tree is registered as B> RWRITE. That isn't right, as that table is defined as read-only. B> 2. Modified ipaddr_variables changing to RWRITE for IPADDR and IPADNETMASK B> 3. Modified IP-MIB.txt

Re: (no subject)

Hi, I did the following: 1. Modified ip.c file to make sure that IP sub tree is registered as RWRITE. 2. Modified ipaddr_variables changing to RWRITE for IPADDR and IPADNETMASK 3. Modified IP-MIB.txt file 4. configured by the giving the option "--enable-mfd_rewrites" and installed I could ch

Re: (no subject)

Bhaskar wrote: Can anyone help me out? I could trace the code for setting IP address but when I traced it out it is not hitting at all. You need to recompile and configure with "--enable-mfd-rewrites" to enable the new-style code. +Thomas -

(no subject)

Hi all, I am new to net-snmp. I have configured snmp to set and get all parameters. I was successful in getting and setting system objects. When I am trying to set IP address for an interface it says "this object is not writable. When I looked at the code, I could identify that the IP subtr

(no subject)

Respected Sir, 1). We are trying to develop a NMS and are unable to create multiple rows in the VLAN TABLE using 3COM Vlan MIB. We followed all the steps given on the site using DLMOD and were able to create only ONE ROW in the VLAN TABLE on the net-snmp agent itself. This is what we did: a.)

Re: (no subject)

> On Mon, 8 Nov 2004 08:38:06 +0800, "Goh, Yen Mei" <[EMAIL PROTECTED]> > said: Yen> May I know how to get it to log? Yen> How to send traps to log file? Where is the log file basically? Thanks. snmptrapd -Lf /my/path/to/a/file -- Wes Hardaker Sparta -

RE: (no subject)

May I know how to get it to log? How to send traps to log file? Where is the log file basically? Thanks. -Original Message- From: Dave Shield [mailto:[EMAIL PROTECTED] Sent: Friday, October 29, 2004 11:38 PM To: Goh, Yen Mei Cc: [EMAIL PROTECTED] Subject: Re: (no subject) > I h

Re: (no subject)

> I have encountered another issue which is regarding the snmptrapd > command. > > I was trying to execute this "Snmptrapd -P" command to get the trap log > however, it gave me the following message and stop halfway for a very > long time. Yes - that's correct. The trap daemon is designed to run

RE: (no subject)

ber 28, 2004 7:47 PM To: Goh, Yen Mei Cc: [EMAIL PROTECTED] Subject: Re: (no subject)   GYM> -Original Message- GYM> From: Robert Story (Coders) [mailto:[EMAIL PROTECTED] GYM> Sent: Wednesday, October 27, 2004 6:39 PM GYM> To: Goh, Yen Mei GYM> Cc: [EMAIL PROTECTED]

Re: (no subject)

> Yes, the mibs are in the /usr/local/share/snmp/mibs So why are you specifying "-M /usr/local/share/" ? You seem to be explicitly telling the commands to look in the wrong place. Why? Dave --- This Newsletter Sponsored by: Macrovisio

RE: (no subject)

: Wednesday, October 27, 2004 6:39 PM To: Goh, Yen Mei Cc: [EMAIL PROTECTED] Subject: Re: (no subject) On Wed, 27 Oct 2004 16:18:05 +0800 Goh, wrote: GYM> May I know how to solve the problem of the following error "cannot find GYM> the module"? GYM> GYM> [EMAIL PROTECTED] ne

Re: (no subject)

GYM> -Original Message- GYM> From: Robert Story (Coders) [mailto:[EMAIL PROTECTED] GYM> Sent: Wednesday, October 27, 2004 6:39 PM GYM> To: Goh, Yen Mei GYM> Cc: [EMAIL PROTECTED] GYM> Subject: Re: (no subject) GYM> GYM> On Wed, 27 Oct 2004 16:18:05 +0800 Goh, wro

Re: (no subject)

On Wed, 27 Oct 2004 16:18:05 +0800 Goh, wrote: GYM> May I know how to solve the problem of the following error "cannot find GYM> the module"? GYM> GYM> [EMAIL PROTECTED] net-snmp-5.1.2]$ snmpget -v 1 -c public -M GYM> /usr/local/share/ 1 Are the mibs really in /usr/local/share? Usually we install

(no subject)

Hi,   Thanks for creating snmp-net. May I know how to solve the problem of the following error “cannot find the module”?   [EMAIL PROTECTED] net-snmp-5.1.2]$ snmpget -v 1 -c public -M /usr/local/share/ 1 72.30.195.19 1.3.6.1.4.1.343.2.14.2.10.3.1.0 Cannot find module (IP-MIB): At li

Re: (no subject)

On Thu, 30 Sep 2004 12:44:06 EEST Fatih wrote: FE> Hi everybody, I just started using net snmp for 3-4 days and I'm curious FE> about the source codes. My question is is there a way to pick the source FE> codes of snmpget, snmpgetnext and snmpwalk from the entire source code? I FE> want to compile

(no subject)

Hi everybody, I just started using net snmp for 3-4 days and I'm curious about the source codes. My question is is there a way to pick the source codes of snmpget, snmpgetnext and snmpwalk from the entire source code? I want to compile only the 3 commands, others are not necessary for my applica

Re: (no subject)

[ Sorry for the delay in responding to this ] > I'm working on a project dealing with SNMP traps. > Can SNMPv2 traps be converted to SNMPv3 traps? The first thing to realise is that there's no difference between the structure of traps between SNMPv2c and SNMPv3. Both of them use

(no subject)

Hello. Please help. I was writed the snmp-function . Function is good work but... memory leak :( Why i have the memory leak in my program? This my source code : i use the net-class for crossplatform threads ... http://netclass.sourceforge.net/

(no subject)

Do you Yahoo!? Yahoo! Mail - You care about security. So do we.

(no subject)

Respected Sir,    I'm working on a project dealing with SNMP traps. Changes cannot be made at the agent/sender level but at the receiver level it is possible. Can SNMPv2 traps be converted to SNMPv3 traps? If possible then can we get the source code on the website. Can you send