You can find the code in The Metafontbook, page 106f.
Greetings Lutz
Am 27. Mai 2020 21:19:26 MESZ schrieb Gerben Wierda :
>To honour Donald Knuth, I’ve use his ‘dangerous bend’ (with attribution
>of course) in one of my publications. But I only had a low res image.
>Is the code of this symbol av
Hi all,
I got my system working by quick and dirty patching install.sh
I have now
PLATFORM="linux-aarch64"
after the last esac and all works like expected.
I would like to have a check for aarch64 in the install.sh too.
Greetings Lutz
Am 10. Juni 2020 10:53:32 MESZ schrieb Sytse Knypstra :
:17 PM, Lutz Haseloff wrote:
>> Hi all,
>>
>> I got my system working by quick and dirty patching install.sh
>>
>> I have now
>>
>> PLATFORM="linux-aarch64"
>>
>> after the last esac and all works like expected.
>>
>> I w
27:28 MESZ schrieb Hans Hagen :
>On 6/10/2020 7:07 PM, Lutz Haseloff wrote:
>> I think, there is simply no rule for aarch64 in install.sh
>>
>> I now patched it in a better way.
>
>ok
>
>> The binaries for aarch64 work like a charm on my device, a Samsung
>> G
Hi Hans, hi all
thank you for including the rule for aarch64 into install.sh.
Now the setup routine works for me out of the box.
Thanks again
Greetings Lutz
Am 10. Juni 2020 13:39:51 MESZ schrieb Hans Hagen :
>On 6/10/2020 12:17 PM, Lutz Haseloff wrote:
>> Hi all,
>>
>
Hi Alasdair,
i fiddled with SciTE some years ago and ended with a file
myproperties.properties in the programdata\scite directory.
In this file i set the fonts and my context command as follows:
# Codepages
# UTF-8
code.page=65001
output.code.page=65001
# Byte
# code.page=0
position.left=2
Hi all
I have a similar problem compiling luametafun.tex in the doc sources.
It fails with different errorcodes on win64 and linux aarch64. On linux aarch64
i get a bonus "Segmentation fault".
I append the console outputs of the context runs.
If i comment out the input of luametafun-axis and lua
Hi YAHYAOUI,
This works for me with my LinuxLibertine font.
\definefont[linlib][name:linuxlibertinegregular*default at 12pt]
\starttext
\linlib
\tochar{n:Tux}
\tochar{x:E000}
\tochar{x:E001}
\tochar{x:E002}
\tochar{x:E003}
\tochar{x:2619}
\tochar{x:2767}
\stoptext
Greetings Lutz
Am 21. Novembe
Hi Hraban,
works here as expected.
See attached log.
Greetings Lutz
Am 24. Februar 2021 09:16:30 MEZ schrieb Henning Hraban Ramm :
>Hi, I just stumbled upon this, no time for further checks ATM:
>
>\usemodule[letter]
>can’t find the installed letter/correspondence module in LMTX mode,
>while MkI
Hi all,
the same here for:
mtx-context | ConTeXt Process Management 1.04
mtx-context |
mtx-context | main context file:
/usr/local/context/tex/texmf-context/tex/context/base/mkiv/context.mkiv
mtx-context | current version: 2021.05.19 18:22
mtx-context | main context file:
/u
Hi all,
the same here with
current version: 2021.06.29 23:13
Greetings Lutz
Am 1. Juli 2021 03:02:53 MESZ schrieb Otared Kavian :
>Hi Hans,
>
>I noticed that with the recent LMTX version 2021.06.27 16:59 the
>hyphens do not show up correctly with lucidaot.
>Here is a minimal example and the resu
Hello Michal,
both binaries work in my system.
(Galaxy A50, Userland, Kali Linux)
Greetings Lutz
Am 17. Juli 2021 02:21:08 MESZ schrieb "Michal Vlasák" :
>On Fri Jul 16, 2021 at 12:46 AM CEST, jdh wrote:
>> # My system has GLIBC 2.28, but I don't know how to upgrade it for
>RPis
>
>Can you jdh o
Hi Jim,
perhaps does this work for you?
\setuplist[chapter][headnumber=no]
\setuphead[chapter][number=no]
\starttext
\completecontent
\page
\chapter{Chapter one}
\input knuth
\chapter{Chapter two}
\input ward
\stoptext
Greetings Lutz
Am 9. September 2023 20:11:55 MESZ schrieb
Hi Floris,
directly generating SVG with ConTeXt LMTX is not possible.
But, using LMTX to generate SVGs has some advantages over MPOST.
You can use ConTeXt's advanced color management (transparency and more) and you
can use the very nice font management.
So my "metapost" file is:
\startMPpage
Hi all,
I can't get Kerning working with Noto Serif.
My minimal file is:
\definefontfeature[oldstylenumber][onum=yes]
\definefont[testnoto][file:NotoSerif-Regular*default at 12pt]
\starttext
Line 1: {VAVAVAVAVAVA 12345}\par
Line 2: {\setff{oldstylenumber}VAVAVAVAVAVA 12345}\par
Line 3: {\addff{old
Thanks Hraban,
my Noto Serif (just downloaded) is 2.013
--script font shows kern too:
kern cyrl dflt
dflt dflt
grek dflt
latn dflt
Greetings Lutz
Am 6. Juni 2024 11:12:18 MESZ schrieb Henning Hraban Ramm :
>Am 06.06.24 um 09:41 schrieb Lutz Haseloff:
>&g
Thanks Hans, works now as expected.
Am 6. Juni 2024 16:30:56 MESZ schrieb Hans Hagen :
>On 6/6/2024 12:21 PM, Lutz Haseloff wrote:
>> Thanks Hraban,
>>
>> my Noto Serif (just downloaded) is 2.013
>>
>> --script font shows kern too:
>> kern cyrl dflt
>&
Hi Hans, hi all,
I try to use SciTE for ConTEXt.
One problem seems to be the file scite-context-internal.properties in recent
cont-sci zip.
My Ubuntu says it is a binary file.
Is this intended?
Greetings Lutz___
If
Hi Hans, hi all,
the latest ConTeXt lmtx seems to have a problem with MS Cambria.
My file is:
\setupbodyfont[cambria]
\definefont[symbola][file:symbola*default at 10pt]
\starttext
\startMPpage[offset=1dk]
draw textext("AC{\symbola ⚡}DC");
\stopMPpage
\stoptext
mtxrun finde the font:
➜ ~ mtxru
I get NO.
(With Version 2024.07.31 19:43 LMTX I get NO too)
Lutz
Am 16. August 2024 10:43:12 MESZ schrieb Wolfgang Schuster
:
>Lutz Haseloff schrieb am 16.08.2024 um 09:47:
>> Hi Hans, hi all,
>>
>> the latest ConTeXt lmtx seems to have a problem with MS Cambr
That is my Standard font reload commandline.
Used to work in the past.
Doesn't work in this case.
Lutz
Am 16. August 2024 10:52:22 MESZ schrieb Henning Hraban Ramm :
>Am 16.08.24 um 09:47 schrieb Lutz Haseloff:
>> the latest ConTeXt lmtx seems to have a problem with MS Camb
I have cambria.ttc in my OSFONTDIR.
If I Move it to texmf-fonts,
\doiffileelse and \doifelsefile recognize cambria.ttc.
Greetings Lutz
Am 16. August 2024 11:14:47 MESZ schrieb Wolfgang Schuster
:
>Henning Hraban Ramm schrieb am 16.08.2024 um 10:52:
>> I’m not sure if "cambmath" or "cambria.ttf"
Hi Hans, Hi all,
I try to use widgets with luatex and ConTeXt MKIV.
If i try the example for a choice field from mwidget-s.pdf i get following
error:
javascript : loading script set fld
(C:/context/texmf-context/tex/context/base/java-fld.tex)
! LuaTeX error .../context/texmf-context/tex/cont
2008/4/8, Hans Hagen <[EMAIL PROTECTED]>:
> Lutz Haseloff wrote:
> > Hi Hans, Hi all,
> >
> > I try to use widgets with luatex and ConTeXt MKIV.
> >
> > If i try the example for a choice field from mwidget-s.pdf i get following
> > error:
>
Hi Hans, hi all,
is there a way to get the type1 LucidaBright fonts working
in LuaTeX/MKIV? I put the afm and pfb into the tree.
---
\usetypescript [lucida] [texnansi]
\switchtotypeface [lucida] [9pt]
---
from showfont results in latinmodern.
My try to use
---
2008/4/21, Hans Hagen <[EMAIL PROTECTED]>:
> Lutz Haseloff wrote:
> > Hi Hans, hi all,
> >
> > is there a way to get the type1 LucidaBright fonts working
> > in LuaTeX/MKIV? I put the afm and pfb into the tree.
> > ---
> > \usetypescri
Hi Taco, Hi all,
with the brandnew luatex (build 1186) there is no glyph to be seen in the pdf
but i can copy and paste the invisible text into my texteditor.
the log:
snip
(C:/tex/texmf-context/tex/context/base/spec-fdf.tex
(C:/tex/texmf-context/tex/context/base/spec-fdf.mkiv))
specials :
Hi Wolfgang,
it seems that some fonts need script=latn in \definefontfeature.
(i copied and pasted from font-ini.tex)
So your file works here:
--
% engine=luatex
\definefontfeature
[default]
[script=latn,liga=yes,kern=yes,tlig=yes,trep=yes]
\definefontfeature
[sma
try \setupinteraction[state=start]
Greetings Lutz
2008/5/29 Bernhard Boser <[EMAIL PROTECTED]>:
> I wrote a simple context file for pdf form filling. Translates fine, but the
> resulting pdf simply shows text but no fillable forms. What's needed to
> actually get forms?
>
>
>
> Here's the tex cod
Taco Hoekwater schrieb:
> Hi all,
>
> For the next issue of the ntg's Maps journal, Hans and I believe
> it would be nice to publish the collected responses to this simple
> question:
>
> What do you do with ConTeXT?
>
> We think it would be nice to see all the various ways in which people
>
Hi all,
with the context from 03.02.06 only the punctuation symbols
from the unicode range 30 will be printed.
The symbols from the range FF (f.i. FF0C: FULLWITH COMMA,
FF1A: FULLWITH COLON...) and from the range 20
(203B: REFERENCE MARK...) are printed
as small black squares.
If i convert the fi
> -Ursprüngliche Nachricht-
> Von: Tobias Burnus [mailto:[EMAIL PROTECTED]
> Gesendet: Dienstag, 7. Februar 2006 10:18
> An: [EMAIL PROTECTED]; mailing list for ConTeXt users
> Betreff: Re: [NTG-context] chinese with utf in context
>
>
> Hi Lutz,
>
>
> >>
> > why these numbers?
> >
>
> 255 = U+FF are the so-called Fullwidth Latin Characters
> (http://www.unicode.org/charts/PDF/UFF00.pdf)
> they are "A" "B" "C" etc. but having the width of a Chinese character
> (roughly "A ", "B ", "C "). Since they look rather ugly in
> non-CJK text
Hi Hans, Hi all,
I would like to typeset chinese labels with metapost.
My code is:
-
\starttext
\startMPpage
verbatimtex
\enableregime[utf]
\usemodule[chi-00]
etex;
label(btex ? etex,(0,0));
\stopMPpage
\stoptext
-
It results in the errormessage:
! Argument of \dodoublet
> try:
>
> \starttext
>
> \startMPenvironment
> \enableregime[utf]
> \usemodule[chi-00]
> \stopMPenvironment
> \startMPpage
> label(btex ÆÇæà etex,(0,0));
> \stopMPpage
>
> \stoptext
>
> instead.
>
> Hans
This works fine, thanks
Greetings Lutz
Hi all,
If I use:
\startitemize[m,packed]
\item 三个小矮人 (some chinese characters)
\item Die drei Männlein im Walde
\stopitemize
I get more space between the number and the text in the
chinese line as in the latin line.
The difference is .3-.4em depending on the fonts.
How can I avoid this?
Greet
Peter Rolf schrieb:
>>
> just guessing (but worth a try):
>
> \setupitemgroups[inbetween=]
>
> The default is .5ex, which depends on the current font (see end of
> core-itm.tex).
>
> HTH, Peter
>
\setupitemgroups[inbetween=2cm]
doesn't work.
Iterestingly an inserted \mbox makes the "error" go
Peter Rolf schrieb:
> Lutz Haseloff wrote:
>> Peter Rolf schrieb:
>>> just guessing (but worth a try):
>>>
>>> \setupitemgroups[inbetween=]
>>>
>>> The default is .5ex, which depends on the current font (see end of
>>> core-itm
Hi Jelle,
do you have to use a Proxy?
In my ctxtools.rb i changed the line:
http = Net::HTTP.new(site)
to:
proxy_addr = 'my.proxy.de'
proxy_port = 80
http = Net::HTTP::Proxy(proxy_addr, proxy_port).new(site)
After that an update via ctxtools was possible.
The bad thing is, that i have to change
Hi all,
if i use the metafun macro "externalfigure" with xetex, there is a printed
number
(first externafigure prints a "1", the second a "2" right after the "1" and
so on)
in the lower left corner of the picture; the picture itself is shifted to
the upper right
out of the bounding box.
I have t
Hi all,
if i use the metafun macro "externalfigure" with xetex, there is a printed
number
(first externafigure prints a "1", the second a "2" right after the "1" and
so on)
in the lower left corner of the picture; the picture itself is shifted to
the upper right,
out of the bounding box.
I have
Hi all,
if i use the metafun macro "externalfigure" with xetex, there is a printed
number (first externafigure prints a "1", the second a "2" right after the
"1" and so on) in the lower left corner of the picture; the picture itself
is shifted to the upper right, out of the bounding box.
I have t
Hi all,
if i try to "texexec --lua --make --all" i get following error message:
--
(/usr/share/context/texmf-local/tex/context/base/lang-ini.mkiv
! LuaTeX error ...re/context/texmf-local/tex/context/base/lang-ini.lua:9:
attempt to index global 'lang' (a nil value).
\ctxluab
2007/10/5, Thomas A. Schmitz <[EMAIL PROTECTED]>:
>
>
> On Oct 5, 2007, at 7:14 AM, Lutz Haseloff wrote:
>
> > I use luatex 11.2 beta (self compiled).
> > The error occurs in normal context and in the beta.
> >
> >
> > Greetings
> >
> >
Hi Andrea,
2007/10/10, Andrea Valle <[EMAIL PROTECTED]>:
>
> Hi to all,So, no clues?Being it a fresh install we really do not know what
> to do...we're getting bored of those little black squares...:-)
>
I corrected wrong characters in source.tex like following:
Semiotica duale anzitutto peché
Hi Klaus,
try this:
---
% engine=xetex
\definetypeface[MyFace][rm][Xserif][TeX Gyre Pagella]
\setupbodyfont[MyFace,10pt]
\starttext
\midaligned{\tfb\bf Arkadi und Boris Strugazki}
\blank
\midaligned{\tfb\bf Аркадий и Борис Стругацкие}
\blank[7*big]
\midaligned{\tfc\bf Milliarden Jahre
Hi Andy,
You can try following file:
--
% engine=xetex
\font\myfont="Vollkorn" at 12pt\myfont
\starttext
ſ
\stoptext
--
Every otf/ttf font containing a ſ will work.
Greetings Lutz
13 Nov 2007 10:34:31 +0100, Andreas Hauser <[EMAIL PROTECTED]>:
> Hoi,
>
> how can I produce a ſ (l
Hi all,
how can i get repeated headers for a splitted
TABLE?
I tried to define \setupTABLE[split=yes]
and have \bTH \eTH in my header row.
up-008-s.pdf didn't help further.
Greetings Lutz
___
ntg-context mailing list
[EMAIL PROTECTED]
http://www.ntg.nl
Henning Hraban Ramm schrieb:
Am Mittwoch, 15.10.03, um 10:36 Uhr (Europe/Zurich) schrieb Lutz
Haseloff:
how can i get repeated headers for a splitted
TABLE?
I tried to define \setupTABLE[split=yes]
and have \bTH \eTH in my header row.
\bTABLEhead
(header)
\eTABLEhead
\bTABLEtail
(footer
Henning Hraban Ramm schrieb:
Am Donnerstag, 16.10.03, um 09:19 Uhr (Europe/Zurich) schrieb Lutz
Haseloff:
--
\setupTABLE[split=repeat]
\starttext
\bTABLE
\bTABLEhead
\bTR\bTD \bf Header \eTD \bTD \bf Header \eTD\bTD \bf Header \eTD\bTD
\bf Header\eTD\eTR
\eTABLEhead
\dorecurse{40}{\bTR
Hi John, Hi all,
John Culleton schrieb:
On Monday 27 October 2003 20:44, Patrick Gundlach wrote:
Hi,
Thanks for your hint. There is an anomaly if I call Acrobat
Reader from within Gvim session but if I just call Acrobat
reader from a button or a command line everything works
perfectly.
Just FY
Hallo all,
Running texexec on a ConTeXt-file with integrated
METAPOST-Graphics METAPOST complains about:
---
local_multi_par_area
false
! Equation cannot be performed (numeric=boolean).
;
l.218 local_multi_par_area:=false;
?
---
Hans Hagen schrieb:
News:
http://www.pragma-ade.com/general/magazines/mag-0005.pdf
bold math and mixed bold math; only defined for lucida (dunno other bold
math fonts yet)
I also uploaded new versions.
following error occures on every context run with
the new context:
---
(c:/fpTeX/
Hi Hans, Hi all!
Hans Hagen schrieb:
News:
http://www.pragma-ade.com/general/magazines/mag-0005.pdf
bold math and mixed bold math; only defined for lucida (dunno other
bold math fonts yet)
I also uploaded new versions.
following error occures on every context run with
the new context:
---
Hi David,
David Arnold schrieb:
All,
I've recently installed tetex 2.0.2. I am having difficulty with Metapost
and I am wondering if I have a good installation. If someone else out there
is running tetex 2.0.2, could you try the following on your system and tell
me if you get similar results. Als
Hi all,
if i use another Font as cmr to typeset labels
in MetaPost the german sharp s is typeset
with wrong width.
The same text direct typeset by tex (pdfetex)
without MetaPost looks right.
Is this a bug in tex or in metapost (i dont believe)
or is it a font problem?
Greetings Lutz
My File:
\se
Hans Hagen schrieb:
Hi,
The following works ok here (see previous mail for example of
MPenvironment)
label(btex Hans Maaß, Berlin etex, center currentpicture);
^^^
, needed, else wrong mp run!
My stupid error.
= changed co
Hi Otared, Hi Charlie,
Otared Kavian schrieb:
Dear all,
I am preparing a newsletter for our group on the history of
settlement in Ireland. I would like to use a drop capital at the
start of articles. I think I remember a file explaining how to do
this in Context but I can't find it now. Can a
you can try:
\vbox{
\hbox to \textwidth{\hfill 101 Home Based Businesses\hfill}
\hbox to \textwidth{\hfill for Pet Lovers\hfill}
}
Greetings
Lutz
John Culleton schrieb:
A current book has a title that is too long to fit in the
textwidth when set with expanded spacing.
I want to set up the eve
Hi Hans, Hi all,
i tried to update pdfetex to 1.20a.
I used the standalone version by Fabrice Popineau from:
http://public.www.planetmirror.com/pub/ctan/systems/win32/fptex/standalone/
If pdfetex tries to insert a ttf-font i get an error-message:
Windows complains:
...
systems: end file tes
Thomas A.Schmitz schrieb:
OK, I tried several things to fix the error "Undefined control sequence.
\c!gebied," but it persists. I wiped out my entire
texmf.local tree and started from scratch because I thought the c!gebied
was residing in some older file that ha dnot been overwritten. But even
Hans Hagen schrieb:
Lutz Haseloff wrote:
Hi Hans, Hi all,
\loadmapfile[gbk]
\usemodule[chinese]
\usemodule[chi-simplified]
\starttext
\section{test}
\stoptext
Is this a bug in pdfetex?
welcome to the non downward compatible changes in tex and friends
you may try: texmfstart textools
Hi Hans, hi all,
it seems, that the commands:
\usemodule[chi-simplified]
\usemodule[chi-traditional]
do nothing. They are pointing to files
s-chi-01.tex and s-chi-02.tex which
are not present.
How can i have access to the traditional
chinese characters?
Greetings Lutz
__
Hi Hans, hi all,
it seems, that the commands:
\usemodule[chi-simplified]
\usemodule[chi-traditional]
do nothing. They are pointing to files
s-chi-01.tex and s-chi-02.tex which
are not present.
How can i have access to the traditional
chinese characters?
Greetings Lutz
__
Hi Hans, Hi all,
i try to use mswintex.zip (16.03.05). Sometimes there are funny Characters
in the pdf i did not typed.
For instance the file:
-
\starttext
\stoptext
results in the appending pdf.
Can someone locate the bug?
Greetings Lutz
This is pdfeTeX, Version 3.141592-1.20b-2.2
Patrick Gundlach schrieb:
Hello Lutz,
is your text editor set to utf-16? If yes, set it to utf8 or something
else.
Patrick
I think, my SciTe 1.63 editor puts these characters into every new file.
Is this a known problem?
Has anybody the same effect?
I use SciTe 1.63 for Windows + ConTeXt .proper
Hi Jianfeng, Hi Hans,
because i had the same Problem some time ago i prepared
two PerlScripts for converting Unicode TrueType fonts
to suitable bunches of Type 1 fonts for use in ConTeXt
in big5 and gbk encoding.
I sent the scripts to Hans. He perhaps wanted to include
them into texexec.pl if po
Hi all,
Taco Hoekwater schrieb:
Hi,
This example works OK for me. This error is related to math fonts,
so you should have seen an error about a missing font somewhere
before this (possibly during the texexec --make phase)
My guess is that there probably is a problem with kpathsea finding
map
Taco Hoekwater schrieb:
Thomas A. Schmitz wrote:
Hmm, when I have \startitemize[2], the symbol should be an emdash, so
no math-font should be involved, right? And yes, I did run texhash
after upgrading (it's run by texexec --make automagically, isn't
it?). And as I said: my laptop has
Hi Taco, Hi all,
Taco Hoekwater schrieb:
On my system,
\definetypeface [palatino] [rm] [serif] [palatino] [default]
[encoding=ec]
\definetypeface [palatino] [mm] [math] [palatino] [default]
[encoding=ec]
\setupbodyfont [palatino, 12pt, rm]
This fails because I do not have ec-pplXXX me
luigi.scarso schrieb:
While making modules.pdf
$>texmfstart texexec --pdf --modu font-chi
fails with
font-chi.log:! Font \unicodefont=gbsongcd at 10.0pt not loadable: Metric
(TFM) file not found
I have
$>ls ./texmf-local/fonts/tfm/chinese
b5kai/ b5kaii/ b5song/ b5songi/ gbkai/ gbkaii/
Hi Hans, hi all,
Hans Hagen schrieb:
Hi,
I made a spell checking extension (tex/xml aware), wrapper and some
more stuff for scite. Should work with any recent scite version. Of
course the challenge is to get it working for all kind of encodings.
Is there any interest for this kind of thing
Hi Hans, hi all,
the latest ConTeXt Version (21.07.05) doesn't automatically process
font-chi.tex after
"\usemodule[chinese]" i have to add "\input font-chi" to every ConTeXt file.
Is this a bug or a feature?
Greetings Lutz
___
ntg-context mailing li
Hi Taco,
Taco Hoekwater schrieb:
Coydell Rivers wrote:
Hello Hans, Here is some info you need to know for ref.
AVG Free Edition, todays update. Has labeled todays download of
mswincontext.zip as
being a Trojan horse AgentCJ. Since anything is possible, I will
wait for your response
before
Hi all,
Coydell Rivers schrieb:
Let me gladly, and openly report that
the latest release of mswincontext.zip,
had no files detected as a virus from AVG Free.
On my System (Win XP) F-Secure AV remains complaining about
Trojan.Win32.Agent.ez in texmfstart.exe (timestamp: 03.08.05 00:15).
Hi Duncan,
Duncan Hothersall schrieb:
> Hi all.
>
> I have ConTeXt set up to output Chinese using usemodule[chinese], all
> fonts, encodings and maps are installed and the sample file works well.
>
> Now I have a whole load of Chinese text in utf-8 encoding. Can ConTeXt
> process this, or do I
Hi all,
i finally got the context minimals working on my phone.
I use GNURoot (Debian Jessie).
first-setup.sh works as expected.
Only one problem remains. The luatex binary:
http://minimals.contextgarden.net/current/bin/luatex/linux-armhf/bin/luatex
This is LuaTex, Version 0.98.1 (TeX Live 2017/d
where can i get it?
Hans Hagen schrieb am Di., 23. Aug. 2016 um 10:18 Uhr:
> On 8/23/2016 8:37 AM, Lutz Haseloff wrote:
> > Hi all,
> >
> > i finally got the context minimals working on my phone.
> > I use GNURoot (Debian Jessie).
> > first-setup.sh works
Hi all,
i found a Problem with Cambria. The use of í and ì results in wrong kerning.
\setupbodyfont[cambria]
\starttext
Víctor Lidio Jara Martínez
\stoptext
gives:
Ví ctor Lidio Jara Martí nez
in the pdf.
I use latest context and luatex on Windows and Linux.
Greetings Lutz
_
Hi all,
i found a Problem with Cambria. The use of í and ì results in wrong kerning.
\setupbodyfont[cambria]
\starttext
Víctor Lidio Jara Martínez
\stoptext
gives:
Ví ctor Lidio Jara Martí nez
in the pdf.
I use latest context and luatex on Windows and Linux.
Greetings Lutz
_
Sorry, it was my fault.
I updated my Cambria and all went well (with Cambria).
btw. Congratulations to luatex 1.0.0!
Hans Hagen schrieb am Sa., 24. Sep. 2016 um 12:57 Uhr:
> On 9/23/2016 7:53 PM, Lutz Haseloff wrote:
> > Hi all,
> >
> > i found a Problem with Cambri
Hi all,
it seems that luatex 1.0.0 doesn't recognise the cambria normal from the
ttc.
I can only access the italic, bold, bolditalic and math.
I use minimal context under win7 and win10, both x64.
Greetings Lutz
___
I
Yes, right, but after
mtxrun --script fonts --reload
the regular cambria disappears again.
Am 29. September 2016 09:19:44 MESZ, schrieb Akira Kakuto
:
>> it seems that luatex 1.0.0 doesn't recognise the cambria normal ...
>
>I experienced the same problem.
>After removing font caches, I can obtai
This works fine, thanks.
Am 29. September 2016 10:16:38 MESZ, schrieb Akira Kakuto
:
>> Yes, right, but after
>> mtxrun --script fonts --reload
>> the regular cambria disappears again.
>
>Confirmed.
>mtxrun --script fonts --reload --force
>gives a solution.
>
>Best,
>Akira
>
>
linecap:=butt ;
Am 14. Februar 2017 16:53:04 MEZ schrieb Fabrice Couvreur
:
>Hello,
>In the code below, the red vertical line extends beyond the edges of
>the
>cell.
>Thank you
>Fabrice
>
>\startuniqueMPgraphic{Vertical}
>
> linecap:=squared ;
> path p ; p := unitsquare xyscaled (OverlayWidth,O
Hi all,
it seems that the new ConTeXt on the linux armhf platform is not really up to
date yet.
When i start the update with
sh ./first-setup.sh --modules=all --keep
I get:
-
root@localhost:/usr/local/context# sh ./first-setup.sh --modules=all
--engine=luatex --keep
receiving i
Does that mean, that i can't use the new beta on my phone until linux armhf
supports lua ffi?
btw the new luatex 1.0.4 runs fine here.
Am 18. Februar 2017 10:50:48 MEZ schrieb luigi scarso :
>On Sat, Feb 18, 2017 at 10:32 AM, Lutz Haseloff
>wrote:
>> Hi all,
>>
>>
a4b7e0
u64 function: 0xa4b7e0
string function: 0xa4b7e0
errno function: 0xa4b7e0
typeof function: 0xa4b7e0
cdeffunction: 0xa4b7e0
typefunction: 0xa4b7e0
copyfunction: 0xa4b7e0
Am 18. Februar 2017 11:45:06 MEZ schrieb luigi scarso :
>On Sat, Feb 18, 2017 at 11:00 AM, Lutz Haseloff
&g
2:06:09 MEZ schrieb luigi scarso :
>On Sat, Feb 18, 2017 at 11:59 AM, Lutz Haseloff
>wrote:
>> luatex --version
>> This is LuaTeX, Version 1.0.4 (TeX Live 2017/dev)
>hm why luatex 1.0.4 ?
>I expected that mtxrun installed luatex 1.0.3
>
>>
>> Execute 'luatex -
I copied my self compiled luatex to /usr/local/context/bin and first-setup.sh
worked as expected.
Now i can use the freshest luatex 1.0.4 with todays context beta on my phone.
Thank you all.
Am 18. Februar 2017 12:55:51 MEZ schrieb luigi scarso :
>On Sat, Feb 18, 2017 at 12:49 PM, Lutz Hasel
Hi all,
since yesterday, the installation of the minimals on linux armhf doesn't work
anymore. On a fresh system, after "sh ./first-setup.sh" I get:
receiving incremental file list
bin/
bin/luatex
bin/mtx-update.lua
bin/mtxrun
bin/texlua -> luatex
sent 92 bytes received 8,631,278 bytes 1,150,
Works again as expected, thanks.
> Hans Hagen hat am 2. März 2017 um 10:33 geschrieben:
>
>
> On 3/2/2017 8:47 AM, luigi scarso wrote:
> > On Thu, Mar 2, 2017 at 8:41 AM, Lutz Haseloff wrote:
> >> Hi all,
> >>
> >> since yesterday, the instal
I recently had the same problem.
I installwd fontforge and opened the fobtfile. There you can see the names of
the glyphs.
After that i succeded with following code.
\definefontsynonym [WebDing] [file:webdings.ttf]
\def\WebDingSymbol{\getnamedglyphdirect{WebDing}}
\startsymbolset [webding]
\de
Hello all,
i tried Wolfgang's tma method and wrote the attached symb-imp-win.mkiv.
Perhaps is it useful for someone else.
(wingdng2 and wingdng3 are included)
Greetings Lutz
P.S. Scheif virtuelle Tastatur
Am 31. März 2017 10:56:20 MESZ schrieb Henning Hraban Ramm :
>Am 2017-03-30 um 23:35 schri
Hi all,
i would like to typeset hebrew with context.
My not fully working example:
\starttext
\definedfont[name:narkisim at 20pt]
\setupalign[r2l]
טְרוֹפוֹתִי
\stoptext
In the resulting pdf the vocalisations are on the left side of the glyph,
instead of being centered.
I append the result of con
Hi all,
since some days, everytime I want to run first-setup.sh I get following error
message.
@ERROR: chroot failed
rsync error: error starting client-server protocol (code 5) at main.c(1653)
[Receiver=3.1.1]
Is there something wrong with the rsync server?
Greetings Lutz
--
GPG Key ID 3C4F8
Thank you very much Rik,
your settings for EzraSIL are working nicely for my favorite font Narkisim.
Thanks again
Lutz
Am 15. Dezember 2017 19:09:09 MEZ schrieb Rik Kabel
:
>On 2017-12-15 06:45, Lutz Haseloff wrote:
>> Hi all,
>> i would like to typeset hebrew with context.
Hi Hraban,
thank you for wikifying.
B.t.w טרופותי is the ivrit name of the Gruffalo ;-)
Am 15. Dezember 2017 22:54:57 MEZ schrieb Henning Hraban Ramm :
>Thank you. Wikified:
>http://wiki.contextgarden.net/Arabic_and_Hebrew#Hebrew
>
>Greetlings, Hraban
>---
>http://www.fiee.net
>http://wiki.context
Hi all,
1. the luatex binary for linux armhf is too old for the recent version of
ConTeXt.
It is a 1.0.3 from March 2017.
2. first problem would be not a so big one, but since development level 6505
I'm not
able to compile the experimental luatex myself anymore. It compiles luajittex
but not l
Thanks, 6533 compiles again.
Am 19. Januar 2018 09:02:00 MEZ schrieb luigi scarso :
>On Fri, Jan 19, 2018 at 8:33 AM, luigi scarso
>wrote:
>> On Fri, Jan 19, 2018 at 8:31 AM, Lutz Haseloff
>> wrote:
>>> Hi all,
>>>
>>> 1. the luatex binary for linu
1 - 100 of 219 matches
Mail list logo
