[onap-discuss] [OOM] common Helm Chart conventions

[LUNANUOVA, DOMINIC (DOMINIC)]

I played a bit with the common/postgres chart, and understand it is a WIP.
But have some questions:

-  Should we expect a common chart to deploy in the same namespace as 
the app requiring  it?

Specifically, I found postgres deploys to default namespace, while my pod 
deployed in onap namespace.



-  Should a service ever deploy to default namespace?  And if this is 
allowed, does it imply that it is a "shared" service (i.e. used by more than 1 
parent chart)?

When I attempted helm install local/onap  I observed several (non-common) 
services, secrets and configmaps all in default namespace.



-  Are there any access rule in Kubernetes that impact the naming 
convention for locating a service in another namespace?

Specifically, I discovered my pod in onap namespace could not connect to host 
"pgset" but it could connect to "pgset.default".  Yet when I asked others if 
this should be necessary, they said no.

Thanks,
-Dom
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] problem deploying master branch oom

[Ing-Wher Chen]

Hi Lusheng,


Might your problem be the one that Mandeep mentioned here 
 and here 
?




> Date: Fri, 6 Apr 2018 18:28:24 +
> From: "JI, LUSHENG  (LUSHENG)" 
> To: Roger Maitland 
> Cc: "onap-discuss@lists.onap.org" 
> Subject: [onap-discuss] [OOM] problem deploying master branch oom
> Message-ID: 
> Content-Type: text/plain; charset="utf-8"
>
> Hi Roger,
>
> I am having trouble deploying the current OOM master branch this morning.  I 
> am using a K8s cluster created on a Windriver lab
> xxlarge VM.  Then cloned oom and going through the Helm steps as listed in 
> README.
>
> All the steps went fine until the last ?helm install? step.  The Helm release 
> installation failed and no Helm release was created.
> Pods were queued to be created but I am not sure whether they would be in 
> good shape even if they eventually do come up for
> the reason below.
>
> I looked into the problem and it appears that the Tiller was not able to 
> create config map:
> [storage/driver] 2018/04/06 18:00:17 create: failed to create: ConfigMap 
> "dev.v1" is invalid: data: Too long: must have at most
> 1048576 characters
> [tiller] 2018/04/06 18:00:17 warning: Failed to record release dev: ConfigMap 
> "dev.v1" is invalid: data: Too long: must have at
> most 1048576 characters
>
> Any advice on how we could proceed?
>
> Thanks,
> Lusheng Ji
> ONAP DCAE

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [integration] External Labs Jenkins Job question

[Gary Wu]

On the general process:

At https://wiki.onap.org/display/DW/Integration+Test+Labs it shows the current 
owner of each Integration tenant in the Wind River lab.

Currently Integration-Jenkins and Integration-Stable are dedicated to automated 
deployment testing, and are completely re-deployed using latest code every 6 
hours.

For the other tenants, there’s no automatic redeployment.  Instead, please 
coordinate with the owners in the above link to see if a redeployment is 
desired or an individual VM should be re-initialized.

Thanks,
Gary


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of PLATANIA, MARCO 
(MARCO)
Sent: Friday, April 06, 2018 6:19 AM
To: FREEMAN, BRIAN D ; DRAGOSH, PAMELA L (PAM) 
; 'onap-discuss@lists.onap.org' 

Subject: Re: [onap-discuss] [integration] External Labs Jenkins Job question

Yes, it’s the local proxy.

Pam, which VM are you using for this? I see the VM we used yesterday is still 
fine. Health check is passing.

Marco

From: 
>
 on behalf of BRIAN FREEMAN >
Date: Friday, April 6, 2018 at 9:15 AM
To: "DRAGOSH, PAMELA L (PAM)" 
>, 
"'onap-discuss@lists.onap.org'" 
>
Subject: Re: [onap-discuss] [integration] External Labs Jenkins Job question

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.

I checked another VM in SB07 and its the same so I think its the local nexus 
proxy.

Brian


From: FREEMAN, BRIAN D
Sent: Friday, April 06, 2018 9:14 AM
To: DRAGOSH, PAM >; 
onap-discuss@lists.onap.org
Subject: RE: [integration] External Labs Jenkins Job question

Tha’ts not the nexus repo IP I wonder if Gary has a proxy setup for nexus3.

Brian


From: DRAGOSH, PAM
Sent: Friday, April 06, 2018 9:07 AM
To: FREEMAN, BRIAN D >; 
onap-discuss@lists.onap.org
Subject: Re: [integration] External Labs Jenkins Job question

Ok I did try to update the Policy VM – but it fails to pull images from nexus. 
Not sure if the VM is initialized correctly.

root@onap-policy:/opt# ./policy_vm_init.sh
Already up-to-date.
Login Succeeded
Pulling repository 10.12.5.2:5000/onap/policy-pe
Error: image onap/policy-pe:v1.2-SNAPSHOT-latest not found
Error response from daemon: No such image: 
10.12.5.2:5000/onap/policy-pe:v1.2-SNAPSHOT-latest
Pulling repository 10.12.5.2:5000/onap/policy-drools
Error: image onap/policy-drools:v1.2-SNAPSHOT-latest not found
Error response from daemon: No such image: 
10.12.5.2:5000/onap/policy-drools:v1.2-SNAPSHOT-latest
Pulling repository 10.12.5.2:5000/onap/policy-nexus
Error: image onap/policy-nexus:v1.2-SNAPSHOT-latest not found
Error response from daemon: No such image: 
10.12.5.2:5000/onap/policy-nexus:v1.2-SNAPSHOT-latest
Pulling drools (onap/policy-drools:latest)...
ERROR: repository onap/policy-drools not found: does not exist or no pull access

I’ll see if Marco is available to help me today.

Thanks,

Pam

From: "FREEMAN, BRIAN D" >
Date: Friday, April 6, 2018 at 9:03 AM
To: "DRAGOSH, PAMELA L (PAM)" 
>, 
"onap-discuss@lists.onap.org" 
>
Subject: RE: [integration] External Labs Jenkins Job question

We usually would do a re-install from scratch but we are holding off so 
projects can debug in some cases.
During this pair wise test phase if you have a new docker available in nexus 
feel free to pull it down to the SB-07 environment (Helen/Gary correct me if I 
am wrong)
But the intent of pair wise is for you to quickly get through your tests (and 
confirmation of checked in fixes)

Brian


From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of DRAGOSH, PAM
Sent: Friday, April 06, 2018 8:29 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [integration] External Labs Jenkins Job question

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.
Integration team,

I’m trying to understand why the windriver and tlab jobs are failing health 
check. Yesterday I submitted a fix into integration to ensure its using a 
stable release but it still fails. But after digging into the VM it looks like 
the Jenkin’s Jobs are using older artifacts.

Doesn’t the 

[onap-discuss] ONAP-OOM Deployment Error

[Pulkit Walia]

Hi All,

I need some help related to ONAP Deployment.
I am trying to deploy ONAP on VMware Integrated OpenStack 4.0 with Kubernetes 
and I have been facing an error with it.

I am using the following for ONAP deployment:


  *   VMware Integrated OpenStack 4.0 with Kubernetes
  *   Helm v2.7.0
  *   Kubectl v1.7.0
  *   ONAP-OOM Repository http://gerrit.onap.org/r/oom


I enabled all the components as true in the oom/kubernetes/onap/values.yaml 
file except the portal component, it was disabled.
During this configuration, the deployment was successful using Helm.

But the problem arises when I enable portal component as true in the yaml file. 
The deployment is unsuccessful and I get the following error:

[cid:image001.png@01D3CDBD.925D2FD0]

In the above screenshot, after a successful deployment I am upgrading the 
deployment after enabling the portal component in the yaml file. After that, 
"data: Too Long: ..." error is triggered always, in all the versions of Helm.
I think the portal components is flooding the Kubernetes ConfigMap with large 
amount of data that it is unable to handle.

The kubectl and helm version screenshot is as follows:

[cid:image002.png@01D3CDBF.0A9B16A0]


I have a few doubts/questions regarding this, they are as follows:


  *   Is this a known issue in ONAP Deployment?
  *   Is the portal component responsible for this error?
  *   Is this an issue related to Helm v2.7.x?
  *   Is this an issue related to Kubectl Version?
  *   Is this caused due to VMware Integrated OpenStack with Kubernetes 4.0?
  *   Is this caused due to lack of RAM in the Master and Worker Node Instances 
? (Right now, each of the instance has 32 vCPUs, 128 GB RAM, 256 GB Size)
  *   If not due to one of the reasons above, then what is the cause of this 
error?

It will be really helpful if someone from the ONAP Community can put some of 
their suggestions on this, or someone who has faced the same issue and knows 
the solutions to this error.

Thank You and Regards,
Pulkit Walia

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [onap-tsc] ONAP-OOM Deployment Error

[Mandeep Khinda]

Hi Pulkit,
The OOM team noticed this and created a defect to track the fix which is 
currently a top priority and has a gerrit review outstanding.  I believe it 
will be wrapped up and merged today.
https://jira.onap.org/browse/OOM-858

The root cause is this: portal has a sql file that is extremely large because 
it contains images (binary data).
This is exhausting the config map space so we have removed it and found an 
alternate way of injecting it in the portals db instantiation.  The fix can 
also be used to reduce other config maps that really do not need to be part of 
the helm package.  This was important to us to ensure that it is not just a 
band-aid fix specific to one app.

Mandeep


Begin forwarded message:

From: Pulkit Walia >
Subject: [onap-tsc] ONAP-OOM Deployment Error
Date: April 6, 2018 at 6:35:06 AM EDT
To: "onap-discuss@lists.onap.org" 
>, 
"onap-...@lists.onap.org" 
>, 
"onap-...@lists.onap.org" 
>

Hi All,

I need some help related to ONAP Deployment.
I am trying to deploy ONAP on VMware Integrated OpenStack 4.0 with Kubernetes 
and I have been facing an error with it.

I am using the following for ONAP deployment:


  *   VMware Integrated OpenStack 4.0 with Kubernetes
  *   Helm v2.7.0
  *   Kubectl v1.7.0
  *   ONAP-OOM Repository http://gerrit.onap.org/r/oom

I enabled all the components as true in the oom/kubernetes/onap/values.yaml 
file except the portal component, it was disabled.
During this configuration, the deployment was successful using Helm.

But the problem arises when I enable portal component as true in the yaml file. 
The deployment is unsuccessful and I get the following error:


[cid:image001.png@01D3CDBD.925D2FD0]

In the above screenshot, after a successful deployment I am upgrading the 
deployment after enabling the portal component in the yaml file. After that, 
“data: Too Long: …” error is triggered always, in all the versions of Helm.
I think the portal components is flooding the Kubernetes ConfigMap with large 
amount of data that it is unable to handle.

The kubectl and helm version screenshot is as follows:


[cid:image002.png@01D3CDBF.0A9B16A0]


I have a few doubts/questions regarding this, they are as follows:


  *   Is this a known issue in ONAP Deployment?
  *   Is the portal component responsible for this error?
  *   Is this an issue related to Helm v2.7.x?
  *   Is this an issue related to Kubectl Version?
  *   Is this caused due to VMware Integrated OpenStack with Kubernetes 4.0?
  *   Is this caused due to lack of RAM in the Master and Worker Node Instances 
? (Right now, each of the instance has 32 vCPUs, 128 GB RAM, 256 GB Size)
  *   If not due to one of the reasons above, then what is the cause of this 
error?

It will be really helpful if someone from the ONAP Community can put some of 
their suggestions on this, or someone who has faced the same issue and knows 
the solutions to this error.

Thank You and Regards,
Pulkit Walia

___
ONAP-TSC mailing list
onap-...@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-tsc


This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer 

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] Testing Dmaap locally - problems with reading messages

[UNNAVA, SUNIL]

Its depend on the consumer. You can define consumer group and consumer id based 
on your needs. For example using the following URL, I am subscribing to a topic 
testtopic with consumer group as CG1 and consumer as c1.

http://10.12.5.163:30227/events/testtopic/CG1/C1?timeout=1000


Thanks,
Sunil

From: Migdal, Marcin (Nokia - PL/Wroclaw) [mailto:marcin.mig...@nokia.com]
Sent: Friday, April 06, 2018 10:12 AM
To: UNNAVA, SUNIL ; MUNNELLI, BHAVANI ; 
onap-discuss@lists.onap.org
Cc: KOYA, RAMPRASAD ; LUNANUOVA, DOMINIC 
Subject: Re: Testing Dmaap locally - problems with reading messages


Hello Sunil,



How to determine consumerGroup and consumerId?

May they have any values?

I have found that there is exposed REST API that enables registering consumer 
to topic:
curl  --request PUT localhost:3904/topics/testTopic/consumers/consumerId

But when I call it, then there is thrown NullPointerException:
Caused by: java.lang.NullPointerException
at com.att.nsa.security.NsaAclUtils.updateAcl(NsaAclUtils.java:74)
at 
com.att.nsa.cambria.beans.DMaaPKafkaMetaBroker$KafkaTopic.updateAcl(DMaaPKafkaMetaBroker.java:412)
at 
com.att.nsa.cambria.beans.DMaaPKafkaMetaBroker$KafkaTopic.permitReadsByUser(DMaaPKafkaMetaBroker.java:399)
at 
com.att.nsa.cambria.service.impl.TopicServiceImpl.permitConsumerForTopic(TopicServiceImpl.java:595)
at 
com.att.nsa.dmaap.service.TopicRestService.permitConsumerForTopic(TopicRestService.java:582)

How to stub
com.att.nsa.security.NsaAclUtils.updateAcl(NsaAclUtils.java:74)
for local run of DMaap so that I could register consumer to topic?

Regards,
Marcin




From: UNNAVA, SUNIL >
Sent: Friday, April 6, 2018 3:39:44 PM
To: Migdal, Marcin (Nokia - PL/Wroclaw); MUNNELLI, BHAVANI; 
onap-discuss@lists.onap.org
Cc: KOYA, RAMPRASAD; LUNANUOVA, DOMINIC
Subject: RE: Testing Dmaap locally - problems with reading messages


Marcin,



Consumers has to subscribe to a topic to receive the events. Consumer will 
receive the messages published after subscribed to a topic. Subscriber URL 
({host}:3904/events/testTopic/{consumerGroup}/{consumerId}) is used to both 
subscribe to a topic and receive messages from the topic. ConsumerGroup and 
ConsumerId are used to uniquely identify a subscriber. You will not receive 400 
as response code even when you are trying to subscribe to a consumer.



Thanks,

Sunil



From: Migdal, Marcin (Nokia - PL/Wroclaw) [mailto:marcin.mig...@nokia.com]
Sent: Friday, April 06, 2018 9:09 AM
To: UNNAVA, SUNIL >; MUNNELLI, BHAVANI 
>; 
onap-discuss@lists.onap.org
Cc: KOYA, RAMPRASAD >; LUNANUOVA, DOMINIC 
>
Subject: Testing Dmaap locally - problems with reading messages



Hello



I managed to run Dmaap locally with code from master branch.

I am able to list existing queues:

Request:
curl --request GET localhost:3904/topics/listAll
Response:
{"topics": [
{
"owner": "",
"txenabled": false,
"topicName": "msgrtr.apinode.metrics.dmaap"
},
{
"owner": "",
"txenabled": false,
"topicName": "testTopic"
}
]}



Also sending messages to quese seems to work fine:
Request:

curl --header "Content-type: application/json" --request POST --data 
'{"message":"messageContent"}' http://localhost:3904/events/testTopic

Response:

{
"serverTimeMs": 2,
"count": 1
}



Also in logs there are entries that message has been published:



""2018-04-06 12:59:09,875 [qtp1555093762-2808] INFO  
com.att.nsa.dmaap.service.EventsRestService - Publishing message to topic 
testTopic
""2018-04-06 12:59:09,879 [qtp1555093762-2808] INFO  
com.att.nsa.cambria.service.impl.EventsServiceImpl - Published 1 msgs in 2ms 
for topic testTopic



Now target is to read messages from topic named testTopic



According to:

http://onap.readthedocs.io/en/amsterdam/submodules/dmaap/messagerouter/messageservice.git/docs/Installation/Installation.html


below request should work fine:

curl -H "Content-Type:text/plain" -GET 
http://localhost:3904/events/testTopic/CG1/C1?timeout=1000

But it does not work. Also logs confirm that:

2018-04-06 13:03:25.608:WARN:oejh.HttpParser:qtp1555093762-2885: badMessage: 
400 for HttpChannelOverHttp@7a1b89e8{r=0,c=false,a=IDLE,uri=-}

>From EventsRestService implementation I can see that request should look like 
>as below one:

[onap-discuss] [ccsdk] Weekly call cancelled 4/6

[TIMONEY, DAN]

CCSDK team,

Sorry for late notice, but I need to cancel this week’s CCSDK project meeting 
due to a conflict.


Dan Timoney
Principal Technical Staff Member
AT
Email : dtimo...@att.com
Office : +1 (732) 420-3226
Mobile : +1 (201) 960-1211
200 S Laurel Ave, Rm E2-2A03
Middletown, NJ 08873
From: linuxfoundation.org_1rmtb5tpr3uc8f76fmflplo...@group.calendar.google.com
When: 11:00 AM - 12:00 PM April 6, 2018
Subject: [ccsdk] Weekly (Updated Dec. 5, 2017)
Location: https://zoom.us/j/826248894


more details 
»
[ccsdk] Weekly (Updated Dec. 5, 2017)
When

Weekly from 8am to 9am on Friday Pacific Time

Where

https://zoom.us/j/826248894
 
(map)

Calendar

onap-discuss@lists.onap.org

Who

•

kp...@linuxfoundation.org - creator

•

onap-discuss@lists.onap.org

•

dt5...@att.com



Updated Dec. 5, 2017
ONAP Meeting 6 is inviting you to a scheduled Zoom meeting.
Join from PC, Mac, Linux, iOS or Android: 
https://zoom.us/j/826248894
Or iPhone one-tap (US Toll): +14086380968,,826248894# or 
+16465588656,,826248894#
Or Telephone:
Dial: +1 408 638 0968 (US Toll) or +1 646 558 8656 (US Toll)
+1 855 880 1246 (US Toll Free)
+1 877 369 0926 (US Toll Free)
Meeting ID: 826 248 894
International numbers available: 
https://zoom.us/zoomconference?m=NVGUf0EROBhf9FVPH4nxUC0b1KnSta53



Going?   All events in this series:   
Yes
 - 
Maybe
 - 
No
more options 

Re: [onap-discuss] Testing Dmaap locally - problems with reading messages

[UNNAVA, SUNIL]

Marcin,

Consumers has to subscribe to a topic to receive the events. Consumer will 
receive the messages published after subscribed to a topic. Subscriber URL 
({host}:3904/events/testTopic/{consumerGroup}/{consumerId}) is used to both 
subscribe to a topic and receive messages from the topic. ConsumerGroup and 
ConsumerId are used to uniquely identify a subscriber. You will not receive 400 
as response code even when you are trying to subscribe to a consumer.

Thanks,
Sunil

From: Migdal, Marcin (Nokia - PL/Wroclaw) [mailto:marcin.mig...@nokia.com]
Sent: Friday, April 06, 2018 9:09 AM
To: UNNAVA, SUNIL ; MUNNELLI, BHAVANI ; 
onap-discuss@lists.onap.org
Cc: KOYA, RAMPRASAD ; LUNANUOVA, DOMINIC 
Subject: Testing Dmaap locally - problems with reading messages


Hello



I managed to run Dmaap locally with code from master branch.

I am able to list existing queues:
Request:
curl --request GET localhost:3904/topics/listAll
Response:
{"topics": [
{
"owner": "",
"txenabled": false,
"topicName": "msgrtr.apinode.metrics.dmaap"
},
{
"owner": "",
"txenabled": false,
"topicName": "testTopic"
}
]}



Also sending messages to quese seems to work fine:
Request:
curl --header "Content-type: application/json" --request POST --data 
'{"message":"messageContent"}' http://localhost:3904/events/testTopic

Response:
{
"serverTimeMs": 2,
"count": 1
}



Also in logs there are entries that message has been published:


""2018-04-06 12:59:09,875 [qtp1555093762-2808] INFO  
com.att.nsa.dmaap.service.EventsRestService - Publishing message to topic 
testTopic
""2018-04-06 12:59:09,879 [qtp1555093762-2808] INFO  
com.att.nsa.cambria.service.impl.EventsServiceImpl - Published 1 msgs in 2ms 
for topic testTopic



Now target is to read messages from topic named testTopic



According to:

http://onap.readthedocs.io/en/amsterdam/submodules/dmaap/messagerouter/messageservice.git/docs/Installation/Installation.html


below request should work fine:
curl -H "Content-Type:text/plain" -GET 
http://localhost:3904/events/testTopic/CG1/C1?timeout=1000

But it does not work. Also logs confirm that:
2018-04-06 13:03:25.608:WARN:oejh.HttpParser:qtp1555093762-2885: badMessage: 
400 for HttpChannelOverHttp@7a1b89e8{r=0,c=false,a=IDLE,uri=-}

>From EventsRestService implementation I can see that request should look like 
>as below one:
curl  --request GET localhost:3904/events/testTopic/{consumerGroup}/{consumerId}
But I do not know consumerGroup and ConsumerID.

So question how to read messages from DMaap using DMaap REST API?

Best regards,
Marcin Migdal
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] ONAP using heat templates

[Beejal Shah]

Couple of things:


1.   Those heat templates look like the pre-Amsterdam version of ONAP, you 
should probably move to R1 (Amsterdam) version:

https://gerrit.onap.org/r/gitweb?p=demo.git;a=tree;f=heat/ONAP;h=64815cec035a3e9819699309375991f519e9f23e;hb=refs/heads/amsterdam


2.   If you are required to go through a proxy server to reach the 
internet, then you will have to make updates to the template to define 
http_proxy and https_proxy environment variables




From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of FREEMAN, BRIAN D
Sent: Friday, April 06, 2018 8:50 AM
To: Pavithra R13 ; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] ONAP using heat templates

Do you VM's have access to the internet. Check the cloud-init logs and see if 
there were error messages trying to resolve nexus3.onap.org and the like.

Most likely the VM's are blank becuase the vm_install and vm_init scipts cant 
reach the internet (or at least that is the most likely scenario).

Make sure public dns is on your external network.

Brian


From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Pavithra R13
Sent: Friday, April 06, 2018 3:37 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] ONAP using heat templates

Hi All
I am trying to install ONAP using heat templates on Openstack Pike. I 
downloaded the template and environment file from the link 
https://nexus.onap.org/content/sites/raw/org.openecomp.demo/heat/OpenECOMP/1.0.0
 . The stack is up and am able to access the VMs. But am not able to access the 
ONAP PORTAL. When I logged into the portal VM and ran "docker ps -a" I could 
see there is no docker installed. So I guess the installation might not have 
completed successfully and just empty VMs are created. Kindly let me know how 
to check the installation or let me know any other working heat templates.
Thanks & Regards,
Pavithra R



This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer 

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [integration] External Labs Jenkins Job question

[FREEMAN, BRIAN D]

Tha’ts not the nexus repo IP I wonder if Gary has a proxy setup for nexus3.

Brian


From: DRAGOSH, PAM
Sent: Friday, April 06, 2018 9:07 AM
To: FREEMAN, BRIAN D ; onap-discuss@lists.onap.org
Subject: Re: [integration] External Labs Jenkins Job question

Ok I did try to update the Policy VM – but it fails to pull images from nexus. 
Not sure if the VM is initialized correctly.

root@onap-policy:/opt# ./policy_vm_init.sh
Already up-to-date.
Login Succeeded
Pulling repository 10.12.5.2:5000/onap/policy-pe
Error: image onap/policy-pe:v1.2-SNAPSHOT-latest not found
Error response from daemon: No such image: 
10.12.5.2:5000/onap/policy-pe:v1.2-SNAPSHOT-latest
Pulling repository 10.12.5.2:5000/onap/policy-drools
Error: image onap/policy-drools:v1.2-SNAPSHOT-latest not found
Error response from daemon: No such image: 
10.12.5.2:5000/onap/policy-drools:v1.2-SNAPSHOT-latest
Pulling repository 10.12.5.2:5000/onap/policy-nexus
Error: image onap/policy-nexus:v1.2-SNAPSHOT-latest not found
Error response from daemon: No such image: 
10.12.5.2:5000/onap/policy-nexus:v1.2-SNAPSHOT-latest
Pulling drools (onap/policy-drools:latest)...
ERROR: repository onap/policy-drools not found: does not exist or no pull access

I’ll see if Marco is available to help me today.

Thanks,

Pam

From: "FREEMAN, BRIAN D" >
Date: Friday, April 6, 2018 at 9:03 AM
To: "DRAGOSH, PAMELA L (PAM)" 
>, 
"onap-discuss@lists.onap.org" 
>
Subject: RE: [integration] External Labs Jenkins Job question

We usually would do a re-install from scratch but we are holding off so 
projects can debug in some cases.
During this pair wise test phase if you have a new docker available in nexus 
feel free to pull it down to the SB-07 environment (Helen/Gary correct me if I 
am wrong)
But the intent of pair wise is for you to quickly get through your tests (and 
confirmation of checked in fixes)

Brian


From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of DRAGOSH, PAM
Sent: Friday, April 06, 2018 8:29 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [integration] External Labs Jenkins Job question

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.
Integration team,

I’m trying to understand why the windriver and tlab jobs are failing health 
check. Yesterday I submitted a fix into integration to ensure its using a 
stable release but it still fails. But after digging into the VM it looks like 
the Jenkin’s Jobs are using older artifacts.

Doesn’t the Jenkin’s Job go in and update the VM and install the latest 
artifacts? Or is the expectation that Project owners go into their VM and 
update the VM’s for their project with the latest docker images so the jobs 
work? Who owns that whole process?

Thanks,

Pam
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Testing Dmaap locally - problems with reading messages

[Migdal, Marcin (Nokia - PL/Wroclaw)]

Hello


I managed to run Dmaap locally with code from master branch.

I am able to list existing queues:

Request:
curl --request GET localhost:3904/topics/listAll
Response:
{"topics": [
{
"owner": "",
"txenabled": false,
"topicName": "msgrtr.apinode.metrics.dmaap"
},
{
"owner": "",
"txenabled": false,
"topicName": "testTopic"
}
]}


Also sending messages to quese seems to work fine:
Request:

curl --header "Content-type: application/json" --request POST --data 
'{"message":"messageContent"}' http://localhost:3904/events/testTopic


Response:

{
"serverTimeMs": 2,
"count": 1
}


Also in logs there are entries that message has been published:


""2018-04-06 12:59:09,875 [qtp1555093762-2808] INFO  
com.att.nsa.dmaap.service.EventsRestService - Publishing message to topic 
testTopic
""2018-04-06 12:59:09,879 [qtp1555093762-2808] INFO  
com.att.nsa.cambria.service.impl.EventsServiceImpl - Published 1 msgs in 2ms 
for topic testTopic


Now target is to read messages from topic named testTopic


According to:

http://onap.readthedocs.io/en/amsterdam/submodules/dmaap/messagerouter/messageservice.git/docs/Installation/Installation.html

below request should work fine:

curl -H “Content-Type:text/plain” -GET 
http://localhost:3904/events/testTopic/CG1/C1?timeout=1000

But it does not work. Also logs confirm that:
2018-04-06 13:03:25.608:WARN:oejh.HttpParser:qtp1555093762-2885: badMessage: 
400 for HttpChannelOverHttp@7a1b89e8{r=0,c=false,a=IDLE,uri=-}

>From EventsRestService implementation I can see that request should look like 
>as below one:
curl  --request GET localhost:3904/events/testTopic/{consumerGroup}/{consumerId}
But I do not know consumerGroup and ConsumerID.

So question how to read messages from DMaap using DMaap REST API?

Best regards,
Marcin Migdal
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [integration] External Labs Jenkins Job question

[FREEMAN, BRIAN D]

We usually would do a re-install from scratch but we are holding off so 
projects can debug in some cases.
During this pair wise test phase if you have a new docker available in nexus 
feel free to pull it down to the SB-07 environment (Helen/Gary correct me if I 
am wrong)
But the intent of pair wise is for you to quickly get through your tests (and 
confirmation of checked in fixes)

Brian


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of DRAGOSH, PAM
Sent: Friday, April 06, 2018 8:29 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [integration] External Labs Jenkins Job question

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.
Integration team,

I’m trying to understand why the windriver and tlab jobs are failing health 
check. Yesterday I submitted a fix into integration to ensure its using a 
stable release but it still fails. But after digging into the VM it looks like 
the Jenkin’s Jobs are using older artifacts.

Doesn’t the Jenkin’s Job go in and update the VM and install the latest 
artifacts? Or is the expectation that Project owners go into their VM and 
update the VM’s for their project with the latest docker images so the jobs 
work? Who owns that whole process?

Thanks,

Pam
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] ONAP using heat templates

[FREEMAN, BRIAN D]

Do you VM's have access to the internet. Check the cloud-init logs and see if 
there were error messages trying to resolve nexus3.onap.org and the like.

Most likely the VM's are blank becuase the vm_install and vm_init scipts cant 
reach the internet (or at least that is the most likely scenario).

Make sure public dns is on your external network.

Brian


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Pavithra R13
Sent: Friday, April 06, 2018 3:37 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] ONAP using heat templates

Hi All
I am trying to install ONAP using heat templates on Openstack Pike. I 
downloaded the template and environment file from the link 
https://nexus.onap.org/content/sites/raw/org.openecomp.demo/heat/OpenECOMP/1.0.0
 . The stack is up and am able to access the VMs. But am not able to access the 
ONAP PORTAL. When I logged into the portal VM and ran "docker ps -a" I could 
see there is no docker installed. So I guess the installation might not have 
completed successfully and just empty VMs are created. Kindly let me know how 
to check the installation or let me know any other working heat templates.
Thanks & Regards,
Pavithra R



___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [app-c] appc client library location

[CHO, TAKAMUNE]

Hi Ramu,

Thanks again on interested on APPC.

Yes. APPC does support netconf/chef/ansible for VNF configuration as you have 
seen in the document.

I would strongly suggest that if you could attend APPC weekly meeting, then you 
would get more knowledge for APPC. APPC weekly meeting would be held on 11:00 
EST Wed in zoom meeting. For more details meeting information, please refer:  
https://wiki.onap.org/pages/viewpage.action?pageId=6587439

Thank you,

Taka

From: Akula, Ramanjaneyul Reddy (Nokia - US/Irving) 
[mailto:ramanjaneyul_reddy.ak...@nokia.com]
Sent: Thursday, April 05, 2018 8:23 PM
To: CHO, TAKAMUNE 
Cc: onap-discuss@lists.onap.org; ANUMANENI, VENKATA RAMANA 

Subject: RE: [onap-discuss] [app-c] appc client library location

Forgot to reply all, so lost the discussion forum here.
Adding back it.

Hi Taka,
Once again thanks for your kind response.
As per APP-C doc it says it supports netconf/chef/ansible.
Wondering what all are the options we have to do the VNF configuration?


best regards,
Ramu


___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] [integration] External Labs Jenkins Job question

[DRAGOSH, PAMELA L (PAM)]

Integration team,

I’m trying to understand why the windriver and tlab jobs are failing health 
check. Yesterday I submitted a fix into integration to ensure its using a 
stable release but it still fails. But after digging into the VM it looks like 
the Jenkin’s Jobs are using older artifacts.

Doesn’t the Jenkin’s Job go in and update the VM and install the latest 
artifacts? Or is the expectation that Project owners go into their VM and 
update the VM’s for their project with the latest docker images so the jobs 
work? Who owns that whole process?

Thanks,

Pam
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] AAI inventory update after onboarding / instantiation on openstack using SO API

[Ullas Kumar Kotrappa Yereseemi]

Hello Jimmy,

Thanks for the details , that did gave some more information but still the 
information on the Host and IP of the VNF was not available as part of the AAI 
Call ( I tried the depth 3 and greater than 3 as well) . As part of the VNF 
Module Initialization call via SO.

http://{ONAP_MSO}ecomp/mso/infra/serviceInstances/v4/{instance_id}/vnfs/{VNF_ID}vfModules

The response for the above call for VNF creation was the instance ID. How can 
we get what information updated to AAI as part of the VNF Module creation API 
call.

Regards,
Ullas

From: FORSYTH, JAMES [mailto:jf2...@att.com]
Sent: Thursday, April 5, 2018 9:32 PM
To: Ullas Kumar Kotrappa Yereseemi ; SMOKOWSKI, 
STEVEN ; onap-discuss@lists.onap.org
Cc: Syed Atif Husain 
Subject: Re: [onap-discuss] AAI inventory update after onboarding / 
instantiation on openstack using SO API

Hi, Ullas,

If you want to see objects that are contained by the vnf, I suggest setting the 
depth= query parameter.  By default depth is set to 0, meaning only fetch the 
given object and not objects that it contains.

Example: 
https://{ONAP_AAI}/aai/v11/network/generic-vnfs/generic-vnf/b8f1c9ed-a14d-4a32-8f34-a4eefef559e4?depth=3

Thanks,
jimmy


From: 
>
 on behalf of Ullas Kumar Kotrappa Yereseemi 
>
Date: Thursday, April 5, 2018 at 11:55 AM
To: "SMOKOWSKI, STEVEN" >, 
"onap-discuss@lists.onap.org" 
>
Cc: Syed Atif Husain >
Subject: Re: [onap-discuss] AAI inventory update after onboarding / 
instantiation on openstack using SO API

Hello Steve,

Thanks for the response. However, we could not get any details as part of the 
get VNF Details call.

PFB the response we got after VNF was successfully instantiated on Openstack. 
Is there any other way to check what is updated on AAU as part of the service 
instantiation call from SO ?

Request:

https://{ONAP_AAI}/aai/v11/network/generic-vnfs/generic-vnf/b8f1c9ed-a14d-4a32-8f34-a4eefef559e4

{
"vnf-id": "b8f1c9ed-a14d-4a32-8f34-a4eefef559e4",
"vnf-name": "ExfoVverfierServcie_3_4_2018_VNF_V2",
"vnf-type": "ExfoVverfierServcie_2_4_18/Exo_vVerfier_2_4_18 0",
"service-id": "test",
"prov-status": "PREPROV",
"orchestration-status": "Created",
"in-maint": false,
"is-closed-loop-disabled": false,
"resource-version": "1522748583099",
"model-invariant-id": "1ef558e3-925e-4073-9d96-5719c461a354",
"model-version-id": "e82b6e95-69d7-4d4e-886a-d46abc2791d0",
"model-customization-id": "c315d678-c31a-483a-b2a5-d60bb56e95d4",
"nf-type": "",
"nf-function": "",
"nf-role": "",
"nf-naming-code": "",
"relationship-list": {
"relationship": [
{
"related-to": "service-instance",
"related-link": 
"/aai/v11/business/customers/customer/Demonstration/service-subscriptions/service-subscription/vCPE/service-instances/service-instance/ef4633b2-9212-4c22-8bdf-137a816e4e29",
"relationship-data": [
{
"relationship-key": "customer.global-customer-id",
"relationship-value": "Demonstration"
},
{
"relationship-key": "service-subscription.service-type",
"relationship-value": "vCPE"
},
{
"relationship-key": 
"service-instance.service-instance-id",
"relationship-value": 
"ef4633b2-9212-4c22-8bdf-137a816e4e29"
}
],
"related-to-property": [
{
"property-key": 
"service-instance.service-instance-name",
"property-value": "ExfoVverfierServcie_3_4_2018_V2"
}
]
}
]
}

[onap-discuss] ONAP using heat templates

[Pavithra R13]

Hi All
I am trying to install ONAP using heat templates on Openstack Pike. I 
downloaded the template and environment file from the link 
https://nexus.onap.org/content/sites/raw/org.openecomp.demo/heat/OpenECOMP/1.0.0
 . The stack is up and am able to access the VMs. But am not able to access the 
ONAP PORTAL. When I logged into the portal VM and ran "docker ps -a" I could 
see there is no docker installed. So I guess the installation might not have 
completed successfully and just empty VMs are created. Kindly let me know how 
to check the installation or let me know any other working heat templates.
Thanks & Regards,
Pavithra R



___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss