> On 11 Jan 2024, at 23:56, Henk Terhell wrote:
>
> Larry, the new firmware V2.40 for K-1 and K-1 II has been corrected and is
> out now as 2.41. I guess it should be safe now to update.
> For K-1: https://www.ricoh-imaging.co.jp/english/support/digital/k1.html
>
I just updated my K1 2.20
Larry, the new firmware V2.40 for K-1 and K-1 II has been corrected and
is out now as 2.41. I guess it should be safe now to update.
For K-1: https://www.ricoh-imaging.co.jp/english/support/digital/k1.html
Henk
Op 2023-12-19 om 20:18 schreef Larry Colen:
A couple days after the new firmware
The new firmware was suspended by Pentax due to problems.
https://www.ricoh-imaging.co.jp/english/support/digital/k1.html
Henk
Op 2023-12-19 om 20:18 schreef Larry Colen:
A couple days after the new firmware for the K-1 dropped I saw someone on the
facebook group complaining how it made his
A couple days after the new firmware for the K-1 dropped I saw someone on the
facebook group complaining how it made his K-1 unusable. I don't remember the
details. Being able to use the third gen astrotracer that operates based on a
test shot rather than dead reckoning is very tempting, but
https://www.pentaxforums.com/articles/firmware-updates/pentax-k-1-firmware-v142-released.html?src=eml
--
-- Photography takes an instant out of time, altering life by holding
it still. Dorothea Lange
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
...@gmail.com
Subject: Re: K-3 firmware update 1.21 is out...
My camera body is fine. My physical body could use a good Firmware
Update, if you know what I mean.
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML
They have a pill for that - nudge, nudge, wink wink
Kenneth Waller
http://www.pentaxphotogallery.com/kennethwaller
- Original Message -
From: Darren Addy pixelsmi...@gmail.com
Subject: Re: K-3 firmware update 1.21 is out...
My camera body is fine. My physical body could use a good
The biggest K-3 II bug I've run across is the total absence of one in
my camera bag
Quite easily fixed with an iinfusion of greenbacks.
Kenneth Waller
http://www.pentaxphotogallery.com/kennethwaller
- Original Message -
From: Larry Colen l...@red4est.com
Subject: Re: K-3 firmware
On 2 June 2015 at 07:39, Larry Colen l...@red4est.com wrote:
Darren Addy wrote:
...and reportedly fixes the bug found by some in 1.20
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
(If you didn't already see it.)
The biggest K-3 II bug I've run across is the total absence
My camera body is fine. My physical body could use a good Firmware
Update, if you know what I mean.
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
firmware update 1.21 is out...
...and reportedly fixes the bug found by some in 1.20
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
(If you didn't already see it.)
--
Life is too short to put up with bad bokeh.
--
Science - Questions we may never find answers
On Tue, Jun 2, 2015 at 2:39 AM, Larry Colen l...@red4est.com wrote:
Darren Addy wrote:
...and reportedly fixes the bug found by some in 1.20
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
(If you didn't already see it.)
The biggest K-3 II bug I've run across is the total
Thanks for the heads up and reminder. Meant to do this a few days ago.
Cheers, Christine
On May 28, 2015, at 11:01 AM, Darren Addy pixelsmi...@gmail.com wrote:
...and reportedly fixes the bug found by some in 1.20
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
(If you
Done a couple days ago, with no apparent problems.
Dario
-Messaggio originale-
From: Ken Waller
Sent: Tuesday, June 02, 2015 1:49 AM
To: Pentax-Discuss Mail List
Subject: Re: K-3 firmware update 1.21 is out...
Anybody upgraded yet - any hiccups?
Kenneth Waller
http
Darren Addy wrote:
...and reportedly fixes the bug found by some in 1.20
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
(If you didn't already see it.)
The biggest K-3 II bug I've run across is the total absence of one in
my camera bag.
--
Larry Colen l...@red4est.com
Anybody upgraded yet - any hiccups?
Kenneth Waller
http://www.pentaxphotogallery.com/kennethwaller
- Original Message -
From: Darren Addy pixelsmi...@gmail.com
Subject: K-3 firmware update 1.21 is out...
...and reportedly fixes the bug found by some in 1.20
http://www.ricoh
...and reportedly fixes the bug found by some in 1.20
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
(If you didn't already see it.)
--
Life is too short to put up with bad bokeh.
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to
Didn't see this mentioned yet and don't know if there is anyone
besides Stan that has one, but thought I would pass it along.
... makes two specific changes, as follows, plus the usual catch-all
improved stability for general performance that is listed on every
Pentax update.:
Added OFF mode on
Thanks Darren. There are a couple of places where the 645z could use a little
improved stability for general performance” - maybe the firmware will address
those.
I’ve been reflecting on my experience to date, will post some notes here in the
next few days in case anyone is interested. In
...@caguila.com
Subject: Re: K-3 firmware update to 1.10
Thanks for the heads up, Bruce. I’m eager to see what the AWB improvements
will bring. My first and limited impressions so far on the K-3 is that the
AWB is sometimes a bit inconsistent. My thought is the K5 AWB was more
stable
Subject: Re: K-3 firmware update to 1.10
Hi Ken: has this reading been specifically about the K-3 or just AWB in
general? Cheers, Christine
On Jul 14, 2014, at 10:44 PM, Ken Waller kwal...@peoplepc.com wrote:
I've been reading that using AWB should be avoided, as in general it
produces
) that will at least be consistent
thru the shoot. Unless of course you set a custom WB.
Kenneth Waller
http://www.pentaxphotogallery.com/kennethwaller
- Original Message - From: Christine Aguila christ...@caguila.com
Subject: Re: K-3 firmware update to 1.10
Thanks for the heads up, Bruce. I’m
to those variations.
Kenneth Waller
http://www.pentaxphotogallery.com/kennethwaller
- Original Message -
From: P. J. Alling webstertwenty...@gmail.com
Subject: Re: K-3 firmware update to 1.10
If you're shooting raw awb is as good as any setting, white balance only
really effects the jpeg
christ...@caguila.com
Subject: Re: K-3 firmware update to 1.10
Thanks for the heads up, Bruce. I’m eager to see what the AWB
improvements will bring. My first and limited impressions so far on
the K-3 is that the AWB is sometimes a bit inconsistent. My thought
is the K5 AWB was more stable
.
Kenneth Waller
http://www.pentaxphotogallery.com/kennethwaller
- Original Message -
From: Christine Aguila christ...@caguila.com
Subject: Re: K-3 firmware update to 1.10
Thanks for the heads up, Bruce. I’m eager to see what the AWB improvements
will bring. My first and limited impressions
In case you haven't heard, Ricoh released a firmware update for the
K-3 to bring it to 1.10
* Added Diffraction Correction on Lens Correction.
* Shortened processing time for Digital Filter and Color Fringe Correction.
* Improved stability for AWB (Auto white balance) performance.
* Changed
To: Pentax Discuss Mailing List
Subject: K-3 firmware update to 1.10
In case you haven't heard, Ricoh released a firmware update for the
K-3 to bring it to 1.10
* Added Diffraction Correction on Lens Correction.
* Shortened processing time for Digital Filter and Color Fringe Correction
, at 10:40 AM, Bruce Walker bruce.wal...@gmail.com wrote:
In case you haven't heard, Ricoh released a firmware update for the
K-3 to bring it to 1.10
* Added Diffraction Correction on Lens Correction.
* Shortened processing time for Digital Filter and Color Fringe Correction.
* Improved stability
On Thu, Jul 10, 2014 at 6:40 PM, Bruce Walker bruce.wal...@gmail.com wrote:
In case you haven't heard, Ricoh released a firmware update for the
K-3 to bring it to 1.10
Thanks for the heads up!
I wonder what happened to revisions 1.04 through 1.09 ... ?
Maybe those were internal releases
Maybe the numbering system is base 4.
On Thu, Jul 10, 2014 at 1:18 PM, Attila Boros attila.p...@gmail.com wrote:
On Thu, Jul 10, 2014 at 6:40 PM, Bruce Walker bruce.wal...@gmail.com wrote:
In case you haven't heard, Ricoh released a firmware update for the
K-3 to bring it to 1.10
Thanks
Is anyone having trouble with this firmware update.
I have—
1) held the MENU button and turned the camera on simultaneously, BUT I get no
readings on the back of the LCD—that is, it doesn’t state which version I have.
(Though under *Set-up 4* Firmware Info/Options it does state I have
Is the file you put on your SD card Fwdc220b.bin? You can't just put
the .zip file there, you have to unzip it.*
--
[*] don't worry; you won't see Bob's banana.
On Thu, Jul 10, 2014 at 3:54 PM, Christine Aguila christ...@caguila.com wrote:
Is anyone having trouble with this firmware update.
I
-Messaggio originale-
From: Christine Aguila
Sent: Thursday, July 10, 2014 9:54 PM
To: PDML List
Subject: Re: K-3 firmware update to 1.10
Is anyone having trouble with this firmware update.
I have—
1) held the MENU button and turned the camera on simultaneously, BUT I get
no readings
.
On Thu, Jul 10, 2014 at 3:54 PM, Christine Aguila christ...@caguila.com
wrote:
Is anyone having trouble with this firmware update.
I have—
1) held the MENU button and turned the camera on simultaneously, BUT I get
no readings on the back of the LCD—that is, it doesn’t state which version I
If I download the zip file, it contains a fwdc220b.bin file. That's the
firmware file you have to copy to the SD card.
Dario
-Messaggio originale-
From: Christine Aguila
Sent: Thursday, July 10, 2014 10:17 PM
To: PDML List
Subject: Re: K-3 firmware update to 1.10
Ok, starting all
: Christine Aguila
Sent: Thursday, July 10, 2014 10:17 PM
To: PDML List
Subject: Re: K-3 firmware update to 1.10
Ok, starting all over again, I get a download file that says
“fwdc2200b-2.bin” As you see this file name doesn’t have a capital F and
there’s a “-2” When I try to open this file
it.*
--
[*] don't worry; you won't see Bob's banana.
On Thu, Jul 10, 2014 at 3:54 PM, Christine Aguila christ...@caguila.com
wrote:
Is anyone having trouble with this firmware update.
I have—
1) held the MENU button and turned the camera on simultaneously, BUT I get
no readings on the back
No. However, I can put that .bin file in my website and link it so that you
can download it straight, without a zip container.
Dario
-Messaggio originale-
From: Christine Aguila
Sent: Thursday, July 10, 2014 10:26 PM
To: PDML List
Subject: Re: K-3 firmware update to 1.10
Dario
originale- From: Christine Aguila
Sent: Thursday, July 10, 2014 10:26 PM
To: PDML List
Subject: Re: K-3 firmware update to 1.10
Dario, are you using an Apple computer? Christine
On Jul 10, 2014, at 3:24 PM, Dario Bonazza dario.bona...@virgilio.it wrote:
If I download the zip file
it.*
--
[*] don't worry; you won't see Bob's banana.
On Thu, Jul 10, 2014 at 3:54 PM, Christine Aguila christ...@caguila.com
wrote:
Is anyone having trouble with this firmware update.
I have—
1) held the MENU button and turned the camera on simultaneously, BUT I get
no readings on the back
On Jul 10, 2014, at 15:17 , Christine Aguila christ...@caguila.com wrote:
Ok, starting all over again, I get a download file that says
“fwdc2200b-2.bin” As you see this file name doesn’t have a capital F and
there’s a “-2” When I try to open this file on my iMac, it “archives” the
file
christ...@caguila.com
wrote:
Is anyone having trouble with this firmware update.
I have—
1) held the MENU button and turned the camera on simultaneously, BUT I get
no readings on the back of the LCD—that is, it doesn’t state which version
I have. (Though under *Set-up 4* Firmware Info
...@caguila.com
wrote:
Is anyone having trouble with this firmware update.
I have—
1) held the MENU button and turned the camera on simultaneously, BUT I get
no readings on the back of the LCD—that is, it doesn’t state which version
I have. (Though under *Set-up 4* Firmware Info/Options it does
So try this:
www.dariobonazza.com/public/fwdc220b.bin
(or just rename that fwdc220b-2.bin into fwdc220b.bin, without trying
opening it)
Dario
-Messaggio originale-
From: Christine Aguila
Sent: Thursday, July 10, 2014 10:34 PM
To: PDML List
Subject: Re: K-3 firmware update to 1.10
, Christine Aguila christ...@caguila.com
wrote:
Is anyone having trouble with this firmware update.
I have—
1) held the MENU button and turned the camera on simultaneously, BUT I
get no readings on the back of the LCD—that is, it doesn’t state which
version I have. (Though under *Set-up 4
- From: Christine Aguila
Sent: Thursday, July 10, 2014 10:34 PM
To: PDML List
Subject: Re: K-3 firmware update to 1.10
I’d be grateful if you could do that! Cheers, Christine
On Jul 10, 2014, at 3:32 PM, Dario Bonazza dario.bona...@virgilio.it wrote:
No. However, I can put that .bin
Subject: Re: K-3 firmware update to 1.10
Hi Dario: Thanks so much, but I was able to get a fwdc22b.bin file.
Interestingly, I just downloaded your file and I got a downloaded file name
with the “-2”. Curious. I will have to email Pentax and tell them about
this, so I don’t have to through
another
one...
Pentax cannot help.
Dario
-Messaggio originale- From: Christine Aguila
Sent: Thursday, July 10, 2014 10:55 PM
To: PDML List
Subject: Re: K-3 firmware update to 1.10
Hi Dario: Thanks so much, but I was able to get a fwdc22b.bin file.
Interestingly, I just
On 7/10/2014 11:40 AM, Bruce Walker wrote:
In case you haven't heard, Ricoh released a firmware update for the
K-3 to bring it to 1.10
* Added Diffraction Correction on Lens Correction.
* Shortened processing time for Digital Filter and Color Fringe Correction.
* Improved stability for AWB
Hi John: I had the most current update. We got it to work, and camera is
running fine. Cheers, Christine
Sent from my iPad
On Jul 10, 2014, at 5:36 PM, John sesso...@earthlink.net wrote:
On 7/10/2014 11:40 AM, Bruce Walker wrote:
In case you haven't heard, Ricoh released a firmware
On 10/07/2014 2:55 PM, Christine Aguila wrote:
Hi Dario: Thanks so much, but I was able to get a fwdc22b.bin file.
Interestingly, I just downloaded your file and I got a downloaded
file name with the “-2”. Curious. I will have to email Pentax and
tell them about this, so I don’t have to
John, it's all-inclusive.
I installed it and all systems are go. I can feel an increase in my
skill level already. :-)
On Thu, Jul 10, 2014 at 6:36 PM, John sesso...@earthlink.net wrote:
On 7/10/2014 11:40 AM, Bruce Walker wrote:
In case you haven't heard, Ricoh released a firmware update
On 10/07/2014 5:13 PM, Bruce Walker wrote:
John, it's all-inclusive.
I installed it and all systems are go. I can feel an increase in my
skill level already. :-)
Same here. My reaction time increased 20%.
bill
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
Bill,
Reaction to what?
Does that mean you ran 20% faster or slower?
Regards, Bob S.
On Thu, Jul 10, 2014 at 6:16 PM, Bill anotherdrunken...@gmail.com wrote:
On 10/07/2014 5:13 PM, Bruce Walker wrote:
John, it's all-inclusive.
I installed it and all systems are go. I can feel an increase in
wrote:
If I download the zip file, it contains a fwdc220b.bin file. That's the
firmware file you have to copy to the SD card.
Dario
-Messaggio originale- From: Christine Aguila
Sent: Thursday, July 10, 2014 10:17 PM
To: PDML List
Subject: Re: K-3 firmware update to 1.10
Ok
-Messaggio originale- From: Christine Aguila
Sent: Thursday, July 10, 2014 10:34 PM
To: PDML List
Subject: Re: K-3 firmware update to 1.10
I’d be grateful if you could do that! Cheers, Christine
On Jul 10, 2014, at 3:32 PM, Dario Bonazza dario.bona...@virgilio.it wrote
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
New feature:
Added Bracket shooting in [Anti-Aliasing Filter Simulator].
Fixes:
Improved stability for general performance.
Includes 1.01 update.
--
-bmw
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
Forgot to mention: I installed it and I can still take crap pictures.
On Wed, Feb 5, 2014 at 1:57 PM, Bruce Walker bruce.wal...@gmail.com wrote:
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
New feature:
Added Bracket shooting in [Anti-Aliasing Filter Simulator].
Fixes:
Thanks for the heads up!
How did you become aware of the update?
Kenneth Waller
http://www.pentaxphotogallery.com/kennethwaller
- Original Message -
From: Bruce Walker bruce.wal...@gmail.com
Subject: K-3 firmware update: 1.02
http://www.ricoh-imaging.co.jp/english/support/digital
Waller
http://www.pentaxphotogallery.com/kennethwaller
- Original Message - From: Bruce Walker bruce.wal...@gmail.com
Subject: K-3 firmware update: 1.02
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
New feature:
Added Bracket shooting in [Anti-Aliasing Filter
Subject: K-3 firmware update: 1.02
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
New feature:
Added Bracket shooting in [Anti-Aliasing Filter Simulator].
Fixes:
Improved stability for general performance.
Includes 1.01 update.
--
-bmw
--
PDML Pentax-Discuss
Waller
http://www.pentaxphotogallery.com/kennethwaller
- Original Message - From: Bruce Walker bruce.wal...@gmail.com
Subject: K-3 firmware update: 1.02
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
New feature:
Added Bracket shooting in [Anti-Aliasing Filter
Bonazza dario.bona...@virgilio.it
Subject: Re: New K-3 firmware update 1.01
Direct page:
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
-Messaggio originale-
From: Dario Bonazza
Sent: Thursday, December 19, 2013 8:27 AM
To: Pentax-Discuss Mail List
Subject: New K-3
On Fri, 20 Dec 2013 23:49:44 +0200 Attila Boros wrote:
After doing that I spent another two hours tuning in the focus-adjust for my
most used
autofocus lenses, about a dozen of them :)
You loose the calibration after updating the firmware?
No, at least I hope not :)
I had not done that
Jan van Wijk pen...@dfsee.com wrote:
On Fri, 20 Dec 2013 23:49:44 +0200 Attila Boros wrote:
After doing that I spent another two hours tuning in the
focus-adjust for my most used
autofocus lenses, about a dozen of them :)
You loose the calibration after updating the firmware?
No, at least I
Hi Bruce,
On Thu, 19 Dec 2013 19:06:30 -0500 Bruce Walker wrote:
Improved stability for general performance was good enough for me.
Hmm, I think that line has been in every firmware update by Pentax I have seen
...
Just the 'catch-all' for any other changes, which are hopefully improvements
On Thu, 19 Dec 2013 19:06:30 -0500 Bruce Walker wrote:
I installed it just now. Camera came through it fine.
New 1.01 firmware upgrade went fine for me too.
After doing that I spent another two hours tuning in the focus-adjust for my
most used
autofocus lenses, about a dozen of them :)
Two of
On Fri, Dec 20, 2013 at 2:00 PM, Jan van Wijk pen...@dfsee.com wrote:
On Thu, 19 Dec 2013 19:06:30 -0500 Bruce Walker wrote:
I installed it just now. Camera came through it fine.
New 1.01 firmware upgrade went fine for me too.
After doing that I spent another two hours tuning in the
On Fri, Dec 20, 2013 at 9:00 PM, Jan van Wijk pen...@dfsee.com wrote:
After doing that I spent another two hours tuning in the focus-adjust for my
most used
autofocus lenses, about a dozen of them :)
You loose the calibration after updating the firmware?
--
PDML Pentax-Discuss Mail List
- From: Dario Bonazza
Sent: Thursday, December 19, 2013 8:27 AM
To: Pentax-Discuss Mail List
Subject: New K-3 firmware update 1.01
http://www.ricoh-imaging.co.jp/english/support/download_digital.html
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo
On Thu, 19 Dec 2013 08:27:29 +0100 Dario Bonazza wrote:
http://www.ricoh-imaging.co.jp/english/support/download_digital.html
Hmm, this looks somewhat interresting:
- Improved performance of continuous shooting when using phase-matching
autofocus.
Will install it tomorrow :)
Regards,
Improved stability for general performance was good enough for me. I
installed it just now. Camera came through it fine.
On Thu, Dec 19, 2013 at 5:33 PM, Jan van Wijk pen...@dfsee.com wrote:
On Thu, 19 Dec 2013 08:27:29 +0100 Dario Bonazza wrote:
http://www.ricoh-imaging.co.jp/english/support/download_digital.html
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
Direct page:
http://www.ricoh-imaging.co.jp/english/support/digital/k3_s.html
-Messaggio originale-
From: Dario Bonazza
Sent: Thursday, December 19, 2013 8:27 AM
To: Pentax-Discuss Mail List
Subject: New K-3 firmware update 1.01
http://www.ricoh-imaging.co.jp/english/support
As some knowledgeable PDMLers pointed out to me a few months ago,
all K5s (at least as of release of K5 II*) had a bug related to the
FFMPEG audio codec which resulted in a clicking noise once uploaded
to Youtube (or, possibly played in some players).
http://www.pentax.jp/english/support/digital/q_s.html
I thought I had the latest but found that I was still at v 1.1 - so
maybe this one is new.
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link
is discontinued.
I keep hoping for a firmware update that would give focus peaking
capabilities to the K-5. Maybe there is hope?
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
that apparently the Q10 and the Q are
different enough that the firmware is not identical and also that
firmware improvements keep coming after the camera is discontinued.
I keep hoping for a firmware update that would give focus peaking
capabilities to the K-5. Maybe there is hope?
--
PDML Pentax
Quoting Mark C pdml-m...@charter.net:
http://www.pentax.jp/english/support/digital/q_s.html
I thought I had the latest but found that I was still at v 1.1 - so
maybe this one is new.
Thanks, Mark.
Good to see the Q is still being supported.
--
Cheers
Brian
I didn't see this mentioned on the list, so, I suspect some might
not be aware of it:
Apparently, last week, Pentax released a firmware update for
the new K-5II and K-5IIs cameras:
http://www.pentax.jp/english/support/digital/k-5_2_s.html
Cheers,
Igor
--
PDML Pentax-Discuss Mail List
PDML
From what I heard he was the only one on the set who was able to lift
it. Even the XM214 is probably too heavy to comfortably operate
handheld. I wonder though if a minigun would be more manageable with a
proper battery grip and portrait controls ]=)
2010/10/30 John Sessoms jsessoms...@nc.rr.com:
Apparently the one in the movie is a mock-up of an experimental version
developed to fire 5.56mm ammunition. It was intended to be man portable.
The experiment did not work out.
I don't think they used a real XM214. The movie has a prop gun that
spins the barrels, but doesn't actually fire.
The Man-portable version of the XM214 is 85lbs with a full ammo load,
which is what they used in the movie (IIRC it was functional but
loaded with blanks). They used special effects because the firing rate
was too high for film, and the sound was slowed down to match the
effects.
-Adam
On Sat,
From: Adam Maas
The Man-portable version of the XM214 is 85lbs with a full ammo load,
which is what they used in the movie (IIRC it was functional but
loaded with blanks). They used special effects because the firing
rate was too high for film, and the sound was slowed down to match
the effects.
Official...
http://www.pentax.jp/english/news/announce/20101029.html
--
Thibault Massart aka Thibouille/Thibs
--
Photo: K-7, Sigma 28/1.8 macro, FA50/1.4, DA40Ltd, K30/2.8, DA16-45,
DA50-135, DA50-200, 360FGZ ...
Laptop: Macbook 13 Unibody SnowLeo/Win7
Programing: Delphi
On 2010-10-29 8:30, Thibouille wrote:
Official...
http://www.pentax.jp/english/news/announce/20101029.html
Well, that helps a lot. That gets you up to nearly 3 seconds in machine
gun mode.
--
Thanks,
DougF (KG4LMZ)
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
2010/10/29 Doug Franklin jehosep...@mindspring.com:
Well, that helps a lot. That gets you up to nearly 3 seconds in machine gun
mode.
most submachines don't go that long on a full clip ]=)
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to
That's more than enough for me. I'm pleased.
On Oct 29, 2010, at 9:08 AM, Doug Franklin wrote:
On 2010-10-29 8:30, Thibouille wrote:
Official...
http://www.pentax.jp/english/news/announce/20101029.html
Well, that helps a lot. That gets you up to nearly 3 seconds in
machine gun mode.
--
On 2010-10-29 9:13, eckinator wrote:
2010/10/29 Doug Franklinjehosep...@mindspring.com:
Well, that helps a lot. That gets you up to nearly 3 seconds in machine gun
mode.
most submachines don't go that long on a full clip ]=)
Most submachine guns do better than 7 rounds per second, too.
2010/10/29 Doug Franklin jehosep...@mindspring.com:
most submachines don't go that long on a full clip ]=)
Most submachine guns do better than 7 rounds per second, too. ;-)
perhaps a gatling camera would do the trick? not hand cranked of
course; I was thinking more along the lines of T2
From: eckinator
2010/10/29 Doug Franklin jehosep...@mindspring.com:
Well, that helps a lot. ?That gets you up to nearly 3 seconds in machine gun
mode.
most submachines don't go that long on a full clip ]=)
Actually, the M1928A1 had a a 600RPM cyclic rate and would take just
about 3 sec
http://www.pentax.jp/english/news/announce/20101029.html
Interesting. That's some pretty inefficient buffer usage in the current
version if they can do that. What on earth are they doing.
- Peter
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
Most likely they where rushing to get the camera ready for Photokina.
--
MaritimTim
http://maritimtim.blogspot.com/
2010/10/29 Peter Loveday pe...@loveday.org:
http://www.pentax.jp/english/news/announce/20101029.html
Interesting. That's some pretty inefficient buffer usage in the current
Notice they specify the increased buffer at ISO 100. I wonder what
happens to that buffer at ISO 1600...
On 10/29/2010 5:20 PM, Tim Øsleby wrote:
Most likely they where rushing to get the camera ready for Photokina.
--
MaritimTim
http://maritimtim.blogspot.com/
2010/10/29 Peter
On Fri, Oct 29, 2010 at 5:28 PM, P. J. Alling
webstertwenty...@gmail.com wrote:
Notice they specify the increased buffer at ISO 100. I wonder what happens
to that buffer at ISO 1600...
I was thinking maybe they used to keep uncompressed data in the
buffer, but upgraded it to buffer the
or this:
http://en.wikipedia.org/wiki/Minigun
Favorite of the the Mythbusters.
On Fri, Oct 29, 2010 at 4:07 PM, eckinator eckina...@gmail.com wrote:
2010/10/29 Doug Franklin jehosep...@mindspring.com:
most submachines don't go that long on a full clip ]=)
Most submachine guns do better
2010/10/29 Steven Desjardins drd1...@gmail.com:
or this:
http://en.wikipedia.org/wiki/Minigun
pretty much what I meant by T(erminator)2 (style) mini(gun)cam =]
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please
2010/10/29 Steven Desjardins drd1...@gmail.com:
or this:
http://en.wikipedia.org/wiki/Minigun
Favorite of the the Mythbusters.
http://www.youtube.com/watch?v=rwmi1sdWtNM
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the
On 29 October 2010 17:20, Tim Øsleby maritim...@gmail.com wrote:
Most likely they where rushing to get the camera ready for Photokina.
--
MaritimTim
http://maritimtim.blogspot.com/
I just spoke to Ned at PhotoPlus Expo and he said the engineers had
messed up the software, and when they
I'll still take Kari:
http://www.youtube.com/watch?v=-KmAOtkKf00
I could watch her wreak destruction all day.
On Fri, Oct 29, 2010 at 6:12 PM, eckinator eckina...@gmail.com wrote:
2010/10/29 Steven Desjardins drd1...@gmail.com:
or this:
http://en.wikipedia.org/wiki/Minigun
Favorite of
1 - 100 of 295 matches
Mail list logo
