SamY wrote:
> Copy them into your DenonAvpControl plugin directory after renaming
> the old ones and then restart LMS.
Interesting that you suggested to rename the old files. That was also
what I did before placing the new files into the folder on the
assumption they would still be there if
SamY wrote:
> Okay. The log looks good except for a lot of timeouts due to the high
> number of requests. I suggest trying a larger volume increment per press
> in the app to cut down on the network traffic. 5 seems to work well for
> me in Squeezer. Also, if you are looking for more volume
SamY wrote:
> If you end up doing that, I would be curious to see the debug log
> showing what volume increment the app is sending to LMS when the up/down
> buttons are pressed. Thanks.
Log attached. I set the app to use phone vol buttons for vol adjustment.
There is a setting for amount of
SamY wrote:
> It's a combination of both. The plugin caches volume change requests
> that are received within .25 seconds of each other in order to avoid
> overloading the AVR with a continuous stream of small changes. From the
> log, I can see that Squeeze Ctrl is sending a flood of very small
Aesculus wrote:
> It's interesting that back on the 9th the logs showed volume settings
> around 50 or so. Then on the 10th all the requests were in the 90's.
>
> Do you think this is when the settings were changed on SqueezeCtrl to
> 100% volume? Not sure what that would cause volume changes
SamY wrote:
> I don't know how the Squeeze Ctrl UI handles volume control but,
> according to the log, it seems to prefer values in the 90's. ;-)
> I tend to believe it's a bug (or feature) particular to that app.
> Combined with your +15 max volume setting, you were driving your amp to
>
SamY wrote:
> Sounds good. Alternatively, you could use the Squeeze Ctrl preferences
> option described in Chris's last post if you want to try "fixed at 100%"
> again. Just remember to lower the max AVR volume plugin setting.
I just gave the Squeeze Ctrl settings as suggested a run... volume
SamY wrote:
> Looks like it's working correctly with "Volume control adjusts outputs".
> However the log shows no volume change requests when "Volume is fixed at
> 100%" is selected. Apparently Squeeze Ctrl by default detects when this
> option is in effect and does not send volume requests to
DavidBulluss wrote:
> Whoops! Debug on Log file attached. Just testing it then with LMS volume
> control variable it seems that the amp volume jumps up/down to follow
> the LMS commands. Will try fixed at 100% again and see how it goes.
>
> 33712
100% fixed LMS volume, amp
SamY wrote:
> Thanks for the new log file but I think you forgot to turn debug on.
> It's essentially the same log as the last one but with two additional
> lines. Sorry about your volume mishap. I hope your speakers are okay.
> I'm not sure why your amp went to 100%. I have my player volume
SamY wrote:
> Thanks, David. I see the problem. Attached is a new version of Plugin.pm
> that should take care of it. Unfortunately, the support for zones other
> than the main zone is less robust than I realized prior to looking into
> it more deeply last night. For example, volume synching
Aesculus wrote:
> Are you running 100% volume on the connected LMS device? If not you are
> going to double dip on the power adjustment. None the less I think you
> would still see the amp adjust the volume.
Short answer is no I did not have LMS vol fixed at 100%. I have now set
it to be
DavidBulluss wrote:
> Nothing untoward has popped up in my trials, seems all good!
Actually, testing again yesterday it seemed to me that when controlling
Zone 2 on the X3000 the amp volume remained static and only the LMS feed
to it varied in volume. Will try it again later today and
SamY wrote:
> At the risk of jinxing it, I have not experienced even the slightest
> hiccup in my testing of the latest code drop (the sound you hear is me
> knocking on wood). In fact, after spending so much time coding and
> debugging over the previous week or two, I'm getting bored. I see
SamY wrote:
> Glad to help. Now the question is whether the further ability to execute
> a pre-defined Quick Select command as part of the power-on sequence of
> Zone 2 would be of value. This would only be the case if you regularly
> use that zone with sources other than your Squeezebox
SamY wrote:
> The receiver is not responding to a request for the power status of the
> Zone 2 amp. Since the plugin does work if the receiver is already turned
> on, and powers it off successfully, I would suspect that the receiver is
> not set up to stay powered on in standby mode, which is a
Aesculus wrote:
> OK. If you could turn debug on for the plugin and then turn the player
> that is set for Zone 2 on. Then capture the server log file and post
> here. @samy or I can take a look and see what is happening under the
> covers.
I hope the attached file is the correct one!
David
Aesculus wrote:
> That's a reasonable assumption from the plugin perspective. Not sure how
> the AVR deals with this.
>
> Can you turn on Zone 2 when Zone 1 is off with the Denon remote?
>
> I am not aware of any restriction in the plugin that calls for Zone 1 to
> be on before Zone 2 is
Aesculus wrote:
> Just be clear the plugin should turn on/off all the zones today.
>
> What is missing is applying the Quick Select (1-3) to zones other than
> the main zone. That is not currently supported.
My bad, it does actually turn zone 2 off and has always done so. It will
turn zone 2
SamY wrote:
> Is there anyone out there who has a need for using the Quick Select
> function in a zone other than the main zone? If so, would you be willing
> to be a beta tester for this feature? The code changes should be minimal
> but I thought I'd check to see if there is a need before
Aesculus wrote:
> Not sure where or why it is looking for the 2_2 file. The repo.xml that
> is posted points to 2_3.zip file. I wonder if there is some sort of
> caching going on?
>
> Make sure the Plugin update at the top is for 2.3. On my system it still
> says 2.2, and that would cause that
Aesculus wrote:
> I'll fix it. Look for a version 2.2 in a few hours.
Hold that thought! All good now after a restart and reselect etc. Thanks
anyway :-)
Cheers, David
*Server*rpi3 pCP5.0.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
SamY wrote:
> Hi David. Chris has rolled my changes into version 2.1 of the plugin. If
> you have upgraded and are still having problems, please turn debug on
> during a failed "power on" followed by a "power off" and upload the log
> file. In the meantime, for maximum stability, I would
SamY wrote:
> Attached is my latest version of Plugin.pm, which contains the fix for
> client volume spiking to 100% when attempting to sync to the AVR. I am
> confident that it should fix the problems many have been experiencing in
> this area. Feedback is welcomed. If you downloaded the
SamY wrote:
> Sort of. It fixes a problem where the client volume can spike up to 100%
> when trying to sync to the AVR volume. This commonly happens
> at track changes when "Enable synching the volume" is selected in the
> plugin player settings. I don't have Squeeze CTRL and I don't want to
SamY wrote:
> Hi David. Please download the newer version attached to my previous post
> which fixes a problem with client volume synchronization. Thanks...
>
> -Sam
Will do! When I tested your original one I was disappointed that
changing the volume on my phone using Squeeze CTRL didn't sinc
SamY wrote:
> Hi Chris (and David). I also use Squeezer on Android and it works great
> except for the volume up/down using the phone's volume controls, which
> this change makes possible to use. Yes, the plugin option to sync with
> the AVR after each track is what I was referring to in my
SamY wrote:
> Hello all. I have been using this plugin for a couple of years now and
> love the functionality it offers. Coincidentally, I have recently been
> testing some changes to plugin.pm which fix both problems reported by
> DAR. The simpler of the two, which takes care of the occasional
Not sure what I am doing wrong, but using the YouTube app in LMS I get
"empty" search results every time, even with very common artists. It was
working a while back.
David
*Server*rpi3 pCP5.0.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 /
Aesculus wrote:
> I have a Touch and can try this out. Are you using the screen on the
> Touch or the remote?
>
> Also what firmware is on your Touch?
I do not use the remote, only touch screen on the SBT... and of course
the Squeeze Ctrl app on android.
Logitech Media Server Version: 8.0.0
Aesculus wrote:
> OK. Since I experience non of this without the logs showing the issue I
> would not know where to start.
>
> Once you collect them I am willing to review them with you to see if we
> can identify a pattern or an issue. I'll have to dust of the PERL
> memory cells. :-)
I use
Aesculus wrote:
> For those that are interested the plugin has been updated to Version
> 2.0. It should be available via an update from LMS.
>
> Major change is the addition of a setting to put a delay in the
> QuickStart selection after turning the unit on.
This is one of my most used apps
slartibartfast wrote:
> Yes I have edited the install.xml file myself to get it to work but I
> shouldn't have to.
>
> Sent from my Pixel 3a using Tapatalk
I can't disagree with that!
*Server*rpi3 pCP5.0.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose
slartibartfast wrote:
> I just installed 0.92.0 from the dev repo and it is still reported as
> incompatible.
>
> Sent from my Pixel 3a using Tapatalk
Not sure if you solved this one yet but I had the same problem. Edited
install.xml to change "maxVersion of 7.*" to "maxVersion of 8.* but it
philippe_44 wrote:
> So I'm sorry then I really don't know what can be happening :(
Hi Philippe, happy to report problem solved! I tried and tried many
times with no success, but today I looked carefully at the client ID and
client secret that I copy and paste in... there was a blank space
philippe_44 wrote:
> So I'm sorry then I really don't know what can be happening :(
Hi Philippe, I have uninstalled YT, restarted LMS, re-installed YT,
deleted old project and credentials, created new project and inserted
API key in YT, then apply and restart LMS. Search in YT works.
Personal
philippe_44 wrote:
> What it tells is that the oauth credential is not authorizing the type
> of usage I'm requesting. Are you *sure*you selected "Other" for the
> application type when you created the oauth credentials?
I am very sure I selected "other", as per YT instructions.
philippe_44 wrote:
> Try to set the log level for YT at debug and then erase the server.log,
> try to validate personal credential try refresh a few times and send me
> the log
28970
I tried entering 3 times
+---+
|Filename:
tushma wrote:
> Is possible to play Spotify free on squeezebox?
My understanding is that you need a premium account. Not free.
*Server*rpi3 pCP5.0.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS custom cinema sub
philippe_44 wrote:
> I dont understand. If you want to use a personal account, you have to
> follow the instructions in the settings of the plugin which means that
> you cant miss the content screen. The API key is *not* enough for
> accessing personal data. You *need* the OAuth credentials s
philippe_44 wrote:
> Last time we discussed I deleted entirely my project and re-created one,
> and added the personal account to verify. It all worked, from scratch.
> Did you follow all the steps for creating an OAuth key, including OAuth
> consent screen & al?
There was a consent screen
slartibartfast wrote:
> I never got the red key to show. I don't even bother trying anymore. I
> never found out why.
>
> Sent from my Pixel 3a using Tapatalk
What is making me continue trying is that it worked a few days ago...
unfortunately it was with an old *project* that I needed to
DavidBulluss wrote:
> My error, have now delete the project, created new project, and have
> created the key which I have made valid and put into LMS YouTube. Search
> now works. :)
>
> Thanks!
>
> Regards, David
Have tried many times to now set up USE PERSONAL
philippe_44 wrote:
> Definitively a problem with the API key - Are you sure you have delete
> the *project*, created a new one and restarted from there? Have you
> followed the instructions how to create the key and make it valid for YT
> API? (see 1st post)
My error, have now delete the
philippe_44 wrote:
> Thats the wrong log
Whoops
28948
+---+
|Filename: server.log.zip |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=28948|
philippe_44 wrote:
> Send me a log, but likely there is something wrong with the key
28947
+---+
|Filename: scanner.log.zip |
|Download:
philippe_44 wrote:
> Send me a log, but likely there is something wrong with the key
Is there a way of clearing the preferences/cache on YT? Would like to
try that.
*Server*rpi3 pCP5.0.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
philippe_44 wrote:
> In addition, have you re-created an API key? You need it no matter what
Yes, I had created a new API key yesterday, and then new client ID and
secret ID.
Country code is set to AU (Australia). Previously when it was working
(several months ago) the country code was US, I
philippe_44 wrote:
> One last thing you should do: delete your YT project and create a new
> one. I just saw that Google is doing something funny with
> old projects: they cant create keys anymore...
Thanks for that tip! Have now done so. Have also uninstalled YoutTube &
restarted etc. and
philippe_44 wrote:
> It's in the LMS' webUI, settings, information's tab
Thanks!
Perl Version: 5.28.0 - arm-linux-gnueabihf-thread-multi-64int
*Server*rpi3 pCP5.0.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS
philippe_44 wrote:
> There has to be a Perl version as well, maybe ask pCP team
I can set a log and run it in LMS, which one?
*Server*rpi3 pCP5.0.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS custom cinema sub (&
philippe_44 wrote:
> Look at the log, which Perl version do you have?
This is reported on the piCorePlayer interface page - linux
4.19.40-pcpCore_v7
*Server*rpi3 pCP5.0.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w
philippe_44 wrote:
> Please upgrade
Already using v0.91.0
*Server*rpi3 pCP4.1.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton
680MkII / Grado F-1+ > NAD7155 to phono
Hi all. HNY!
I have been using the Youtube plug in for a while but not recently. Went
to use it a few days ago and it asked for a new client ID etc. No
problem, have done that before. Not working. I enter the new client ID
and the new client secret (copy and pasted) and then . Top of
screen
edwin2006 wrote:
> That would be great since I just own a denon avr.
> Would this mean that the plugin also works on picoreplayer?
I am using it on a picoreplayer with 2 Devon AVR amps in the house,
works nicely. It will be good to have it in a repository and featured as
a standard plugin
mherger wrote:
> > Hi Michael, did you get any reponse from Librespot on this one?
>
> Nope. See https://github.com/librespot-org/librespot/issues/342 - I
> don't have any more information than that, unfortunately.
>
> --
>
> Michael
Thanks for trying. I have been checking the link before
mherger wrote:
> > Michael, just a question from an artist in our household who has
> songs
> > on Spotify... do plays of a song using Spotty register at Spotify as
> > plays for that song/artist? t seems to us that they do not register
> at
> > Spotify as his stats do not appear to change when
Paul Webster wrote:
> He did and none so far
> https://github.com/librespot-org/librespot/issues/342
Thanks Paul :)
*Server*rpi3 pCP4.1.1 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS custom cinema sub (& AR 77XB
mherger wrote:
> > Michael, just a question from an artist in our household who has
> songs
> > on Spotify... do plays of a song using Spotty register at Spotify as
> > plays for that song/artist? t seems to us that they do not register
> at
> > Spotify as his stats do not appear to change when
Paul Webster wrote:
> I would be really surprised if players could tell Spotify not to include
> a track in the stats.
> Does playing one of those tracks when using native Spotify increment the
> count as expected? ... if yes ... how quickly?
> Are you using the artist's Spotify account when
Michael, just a question from an artist in our household who has songs
on Spotify... do plays of a song using Spotty register at Spotify as
plays for that song/artist? t seems to us that they do not register at
Spotify as his stats do not appear to change when I play one of his
tracks. Could it
Michael.
Thanks for this plugin. I have had no reason to have BandCamp previously
but last week my son uploaded his new album up to BandCamp... hey, a
dad's got to do what he has to do! Installed smoothly, found ID cookie
easily thanks to your directions at the top of the thread, and it all
mherger wrote:
> ElFishi - I think I've identified a potential issue with Connect and
> synced players, thanks to your log file. I'll roll out a new build later
>
> today. Thanks!
>
> --
>
> Michael
That was quick... just updated in my system!!! V2.4.5
Cheers, David :)
*Server*rpi3
mherger wrote:
> > Yes, exactly! To terminate the spotty.exe program I would either
> CTRL-C
> > to return to the command prompt or end the task in Task Manager.
> Below
> > is a screenshot with Username and Passwords blurred out.
>
> That sounds like a networking issue to me. Are you using
paul- wrote:
> That's all perfectly normal for a pi3, my green lights flash too, and
> they are just players. By default, the green light is showing activity
> on the microsd port.. but it is just activitynot necessarily a
> read or a write. I think most of what you are seeing is the
paul- wrote:
> Which pi do you have? The Red light should be on solid. A flashing
> red light is normally indications of a power supply problem. If you
> are running pCP 3.5.0 you can go to the diagnostics page and look at the
> dmesg output. See if there are voltage error messages.
mherger wrote:
> > Results from Command in WinSCP:
>
> That's looking good. And I'm definitely running out of ideas :-(
>
> --
>
> Michael
Michael, I can report that Spotty is now working. I do not know exactly
what made the difference but I accept it was in my network. It makes no
sense
mherger wrote:
> > Results from Command in WinSCP:
>
> That's looking good. And I'm definitely running out of ideas :-(
>
> --
>
> Michael
The flashing LED on the Pi when it is idle is worrying me. More checking
shows it is flashing green about every second. It is labelled ACT. Same
if
mherger wrote:
>
> could you please send me the output of "ifconfig" on that pCP box?
>
> --
>
> Michael
Results from Command in WinSCP:
/home/tc$ ifconfig
eth0 Link encap:Ethernet HWaddr B8:27:EB:5C:F8:D0
inet addr:192.168.1.11 Bcast:192.168.1.255
Mask:255.255.255.0
UP
mherger wrote:
>
>
> could you please send me the output of "ifconfig" on that pCP box?
>
> --
>
> Michael
I will do that now and send results as soon as I can. Until then, I only
use the Pi for LMS. At the moment I am not playing music on LMS and my
SBTs are turned off, so effectively
mherger wrote:
> > Could there be some network component
> filtering traffic between your Pi and the internet, but not between your
>
> desktop and the internet?
>
> --
>
> Michael
Both the Pi and the PC that I tested Spotty on yesterday are located
side by side and are connected by LAD
paul- wrote:
> Are you sure the network is resolving names properly?What DNS server
> is being given to the pCP device?
>
> Just open a putty session and type this.
>
> nslookup api.spotify.com
Cut & paste from command screen in WinSCP
*/home/tc$ nslookup api.spotify.com
Server:
mherger wrote:
> >
>
> Just for the sake of it: try to set this to DHCP for another test.
>
> --
>
> Michael
Set to DHCP and restarted. Found the pCP on the network. Restarted LMS
again. Checked Spotty credential - all ok. Spotty still not working.
Unable to access my library at Spotify
mherger wrote:
> >
>
> Is there anything particular about your pCP's network configuration?
>
> --
>
> Michael
There is nothing particular that I know of. The Pi3 is connected
directly to my modem/router via LAN cable, same as my PC. I am using a
staric IP for the Pi3. Nothing has changed
DavidBulluss wrote:
> Sure do... do I need to install LMS on it?
Michael, Spotty installed in LMS 7.9.2 on PC (windows 10) works
perfectly, searches with results etc.
David
*Server*pi3 pCP3.5.0 LMS7.9.2
*Media*ReadyNAS DuoV2
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acou
mherger wrote:
> >
>
> But you certainly have a desktop/notebook?
>
> --
>
> Michael
Sure do... do I need to install LMS on it?
*Server*pi3 pCP3.5.0 LMS7.9.2
*Media*ReadyNAS DuoV2
*Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS custom cinema
mherger wrote:
> > Reverting to pCP 3.2.2 didn't fix it. Am now back with pCP 3.5.0.
>
> Would you have a different system (PC) where you could give it a try?
> Just to figure out whether it's that Pi or some generic problem in your
>
> place?
>
> --
>
> Michael
I still have the ReadyNAS
DavidBulluss wrote:
> Michael, thanks for that. I am trying to think of anything in my system
> that may have changed since earlier in the year when Spotty was working.
> Apart from the obvious of LMS updates and Spotty updates, all I can
> think of is changing to pCP 3.5.0 a
Michael, thanks for that. I am trying to think of anything in my system
that may have changed since earlier in the year when Spotty was working.
Apart from the obvious of LMS updates and Spotty updates, all I can
think of is changing to pCP 3.5.0 a month ago. I wonder if it is
possible for be to
mherger wrote:
>
>
> Somehow Spotty fails to get a token for your credentials. Would you mind
>
> sending me your credentials.json file from the cache folder?
>
> --
>
> Michael
Sent :)
*Server* pi3 pCP LMS
*Media* ReadyNAS DuoV2
*Lounge/dining areas* SBT > Denon AVR2113 > Bose
Nichael, further to previous post, I uninstalled MusicIP and restarted
pCP, and LMS. Attempted to search with Spotty. LMS server.log detail
from pCP UI:
[18-06-05 08:46:13.7780] MAIN::INIT (387) STARTING LOGITECH MEDIA SERVER
(V7.9.2, 1527861596, FRI JUN 1 16:21:00 CEST 2018) PERL 5.024000 -
DavidBulluss wrote:
> Yes, premium account. Pay it every month. Have checked and it is active.
> It was all working with Spotty a few months ago.
>
> Cheers,
>
> David
Michael, I have been reinstalling LMS, pCP, Spotty, and also installed
hotfix to pCP 3.5.0. After restart
mherger wrote:
>
>
> Hmm... you do have a Premium account, don't you?
>
> --
>
> Michael
Yes, premium account. Pay it every month. Have checked and it is active.
It was all working with Spotty a few months ago.
Cheers,
David
*Server* pi3 pCP LMS
*Media* ReadyNAS DuoV2
*Lounge/dining
mherger wrote:
> >
> >> > sudo
> /usr/local/slimserver/Cache/InstalledPlugins/Plugins/Spotty/Bin/arm-linux/spotty-hf
> -n Squeezebox -c "/usr/local/slimserver/Cache/spotty/b39fb39f" -i a
> --get-token
> >
>
> And what about that command? Did you
DavidBulluss wrote:
> Yes, pCP 3.5.0
> Internet radio on LMS working. Spotify on PC via internet working.
>
> David
Not sure if I did this wrong...
tc@piCorePlayerLMS:~$ sudo
/usr/local/slimserver/Cache/InstalledPlugins/Plugins/Spotty/Bin/arm-linux/spotty-hf
-n Squeezebox -c
mherger wrote:
> Ok, here's the line you should try to run on your system:
>
> >
Code:
> > sudo
/usr/local/slimserver/Cache/InstalledPlugins/Plugins/Spotty/Bin/arm-linux/spotty-hf
-n Squeezebox -c "/usr/local/slimserver/Cache/spotty/b39fb39f" -i a --get-token
mherger wrote:
>
>
> Could you please enable DEBUG logging for plugin.spotty, then try again.
>
> Then send me your server.log.zip once again. Thanks!
>
> --
>
> Michael
ZIP file attached. 25116
Cheers, David
+---+
DavidBulluss wrote:
> I have done that already, twice in fact, but will give it another go :)
Removed credentials, restarted LMS. Authenticated from mobile phone
Spotify. Restarted LMS. Same problem and symptoms. No results.
Everything I select on the Spotty interface on LMS gives blank scr
mherger wrote:
> > When I search song or title in Spotty I get a blank page in LMS
> > interface. In Squeeze CTRL It either gives "ERROR Error fetching
> list:
> > Network error " when opening Spotty, or when searching the result is
> > "empty".
>
> There seems to be an authentication issue.
mherger wrote:
> > works on my other devices.
>
> What other devices?
>
> > Spotty will not find any results from Spotify.
>
> What exactly are you doing? What UI? What action? What results do you
> get? Any error message? And check server.log, too.
>
>
> --
>
> Michael
Spotify works
Hoping some one can help me out on this.
I am running Pi3 with pCP v3.5.0 and LMS 7.9.2. I update LMS regularly
(I check for updates almost daily) I haven't been following Spotty
threads for several months now so have probably missed a lot. I also
haven't used Spotty for months but it was
domars wrote:
> Thanks again for your reply. So we have to wait for Michael. That's fine
> :)
>
> PS.: If I can support finding a solution just let me know.
Not sure that it will help but an update of PiCoreplayer from 3.20 to
3.22 can't hurt.
Cheers, David
*Server* pi3 pCP LMS
*Media*
Aesculus wrote:
> Interestingly enough I noticed for some reason that the Settings for the
> plugin cannot be accessed from the web interface (LMS 7.7.2 - r33893).
> This may be because the Google Code repository is no longer valid.
>
> I have not touched my LMS server for years nor looked at
Aesculus wrote:
> It would be interesting to see what you have in mind. For me it's
> working OK. The biggest issue is that audio choices never reflected
> their current states until you selected an item. Never could figure out
> how to get it to reflect the states when first opened.
Am looking
Mnyb wrote:
> Music IP is another server you have to install , that handles the mixing
> and fingerprinting of tracks . it's abandoware since a decade good luck
> :)
Yes, and I have it installed on the windows box and have fingerprinted
my entire library painstakingly over the past 3 months!
mherger wrote:
> > Possibly silly question, but how do I start MusicIP?
>
> Considering you're asking this, I must assume you haven't installed
> it... Did you? It's quite an involved procedure on a Pi. Nothing you'd
> forget easily.
>
> --
>
> Michael
Appears that way... will search the
mherger wrote:
> > Music IP was working when I first installed and set it up (at least I
> > thought it was). Last few weeks it will not function. Today I looked
> at
> > the server.log after restart of LMS and MusicIP is being disabled due
> to
> > port configuration. Are there special port
Music IP was working when I first installed and set it up (at least I
thought it was). Last few weeks it will not function. Today I looked at
the server.log after restart of LMS and MusicIP is being disabled due to
port configuration. Are there special port settings that I need? Any
thoughts?
This thread has become very long and difficult to search through, so
after looking for 10 minutes I will ask a direct question: Is this
message in my LMS server log anything to worry about? "[17-11-16
09:57:14.1610] Plugins::Spotty::Connect::_getCurlCmd (364) Didn't find
the 'curl' utility.
Callebergh wrote:
> Yes WinSCP was what I had in mind when I wrote"something similar",
> picked that up when reading post#708(that is also everything I know
> about WinSCP).
>
> Please share some of the "many reasons" to why you decided to turn away
> from running things solely on the ReadyNAS!
101 - 200 of 315 matches
Mail list logo
