Re: [SlimDevices: Plugins] Announce: Material Skin
cpd73 wrote: > Most odd. Just tried in "Duck duck go" browser, and still works as > expected for me. Which android version? And which version of WebView > (should be able to find this in Play store)? I'm on Android 13 with > WebView 108.0.5359.128 I'm on Android 13 with WebView 108.0.5359.128 also. Can someone show me a screencap of what they are getting with a long press on BROWSE please? Regards, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
cpd73 wrote: > It -should- only take you back to the browse view. e.g. If You were > browsing 'My Music / Album Artists / AC-DC', go to queue page, a > long-press (or short) on 'Browse' should take you back to the browse > view - which should still be showing AC-DC's albums. At least that's the > way its designed and is the way it works for me. > > When already showing the browse view, then the 'Browse' bottom button > acts like the back button - touch goes 1 level back, long-press all the > way back (so 'Home'). Yes, that is what I was expecting but it doen't operate that way for me, BROWSE button always takes me to HOME, regardless of touch, press long press etc. Oh well... Regards, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
Ron F. wrote: > I apologize for the extremely late response ... I was preoccupied with > other things. > > I see this behavior on my new Pixel 6a running Android 13, APK 0.3.0. I > fired up my old Pixel 3a running Android 12, also APK version 0.3.0 - > and with Android 12 the "Cache will be cleared" notification is properly > rendered! So, maybe this is an issue specific to Android 13. Ron, thanks for your reply. Yes, my Samsung S22 is running Android 13. Thanks for the heads up. Now I will put it on an older S6 that I have hanging around and play with it. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
kidstypike wrote: > Your screenshot shows you're on the "Home" page, a log press on the > Browse button when you're on this page does nothing, press and hold when > any another page takes you straight back to the "Home" page. Yes, photo and my description may bea little mis-leading. When in PLAYING or QUEUE a long press, short press, or touch of the BROWSE button takes me to the HOME page. Regards, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
cpd73 wrote: > Yeah, I can see that if I run in a browser. Never noticed before as I > always use the APK. Anyhow, I'll fix this for the next release, as its a > bit annoying! It only happens on the 'Browse' button as that uses an SVG > for its icon. > > BTW, you can also click on the text in the sub-toolbar - this will then > show a menu allowing you to navigate home or to a specific place in the > history. Thanks for that feedback about the browser version, it wasn't totally me! Having said that, I am now trying the APK. Now, this probably is something at my end, a short touch of the Browse button takes me to the menus as expected (see screencap below). Any longer press of the Browse button (0.25 sec, 0.5 sec, 1 sec, 2 secs, 5 secs, etc.) takes me to the same menus (see same screencap below!) 39493 Can you show me an example of what I should be seeing? Regards, David +---+ |Filename: Screenshot_20221219_195413_DuckDuckGo.jpg| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=39493| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
slartibartfast wrote: > Weird. It is letting you download or open the browse icon. > > Sent from my Pixel 3a using Tapatalk The download commenced but was reported as "failed". Opening in a browser window revealed a blank page, screencap below 39486 Cheers, David +---+ |Filename: Screenshot_20221219_190632_DuckDuckGo.jpg| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=39486| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
slartibartfast wrote: > I was using the Material APK but I just tried using Chrome and it works. > Can you show a screenshot of what you see? > > Sent from my Pixel 3a using Tapatalk I just tried using Samsung internet app and I had same result, only a different looking browser menu for downloads etc. The Duck Duck Go menu that pops up is below (screencap from mobile phone). 39485 Cheers, David +---+ |Filename: Screenshot_20221219_184425_DuckDuckGo.jpg| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=39485| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
slartibartfast wrote: > You could be long pressing slightly above the browse icon and long > pressing an album or artist instead. Try lower or use the "back" icon > instead. > > Sent from my Pixel 3a using Tapatalk Nup, I have tried and tried so carefully but all I get is the browser download menu, a shorter press in the same exact location of course takes me to the menus/folders/c as it should. Will eventually try a different browser and see if that works. I am using Duck Duck Go browser. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
w3wilkes wrote: > Yes, the back button to My Music. Just long press it, either mouse click > on a PC or long press on your touch device. I must be doing something wrong, on my android phone a long press on BROWSE just brings up a browser menu to Download the image etc. What have I missed? Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > No problem, David. Glad you are enjoying the multi-zone functionality. > Take care. > > EDIT: I just looked at the debug log and it appears that the AVR power > off is actually being initiated from the plugin in response to a player > "power off" command from LMS approximately 31 minutes after it is turned > on. I would check to make sure that there is not a sleep timer set for > the SB Touch in the player settings or a plugin (e.g. "PowerSave") that > might automatically shut off the player after some interval of time. If > the problem keeps happening after you disable the AVR's Auto Standby for > Zone 2 and check these other possibilities, let me know. Again though, > there is nothing in the plugin itself that would trigger the player > shutting off. Spot on! It was the PowerSave plugin that was the issue, set to "always" (default?) rather than "on stop" etc. I had installed it to try it out int the last few weeks as it was discussed briefly here, and immediately forgot I had done so, apologies for that. Yes, am enjoying the multi-zone functionality, great job! Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > I found the following in a Denon AVR forum post. If it applies to your > model, it could explain what you are seeing and the solution would be, > as you said, to turn off Auto Standby for Zone 2. > > "The Denon manual says that in Main Zone, the Auto Standby fuction will > switch the receiver to standby when, during the selected time, no video > or audio signal is present. > _There's_also_a_Zone2,_where_Auto_Standby_is_not_triggered_by_absence_of_signal,_but_by_absence_of_operation_(volume_control_and_such)._" That is probably it, I had the system on yesterday for much longer than I have for months (due to the weather here finally being worthy of outdoor enjoyment!) and during that time I wandered away from it but left it running, which is unusual behaviour for me, so I wasn't changing tracks or volume as I usually would. Today was I was simulating for log files I left it playing at a low volume without fiddling, again unusual. Thanks for your reply on this, I knew that zone one didn't time out when being used so assumed the same for Z2 - so much for assumptions! I will of course be mindful of it in future. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > I'll take a look at the log but, in the meantime, could you try changing > the Auto Standby value to 1 hour and seeing if that changes when the > Zone shuts off? I can't think of anything in the plugin that would cause > the behavior. Set to 60 minutes, still turned off and play halted. Log attached. 39307 Most likely solution will be to turn the amp time-out off in amp settings, but I haven't seen the behaviour previously. Cheers, David +---+ |Filename: server.log(34).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=39307| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > I'll take a look at the log but, in the meantime, could you try changing > the Auto Standby value to 1 hour and seeing if that changes when the > Zone shuts off? I can't think of anything in the plugin that would cause > the behavior. Will reset it now and report the effect. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Hi Sam. I have noticed that after about a half hour of play the Denon amp switched off and music play is paused when using Z2. Controlling via MS on android. If Z1 is also on then Z2 shuts off and Z1 remains on. Touching PLAY on the MS interface turns the amp back on and it reverts to my preset volume. I do have a 30 minute AUTO STANDBY set generally but it hasn't caused a shutdown while playing music Z2 prior to the recent plugin revisions. Though I would start with the plugin to find any issues so have attached a log in which the issue occurs twice, if you wouldn't mind looking at it for me to see if it is something the plugin is doing, or not doing! 39306 Cheers, David +---+ |Filename: server.log(33).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=39306| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Your debug log looks fine, David. The network response time between the > plugin (LMS) and the AVR seems to be very good also. I would suspect a > response lag between MS and LMS, but I have no means of verifying that > from the log file. Is the MS client running on your phone or on some > other device? You might want to experiment with different volume > increments. Mine is currently set to 1%, which yields very smooth volume > changes on my system. Another thing to play around with is how you slide > your finger up/down on the screen. I find that it works better for me > with a quick flicking motion, like scrolling through a document. > Otherwise, there's always the hardware buttons. I took your lead and set increments to 1% and it is much better thanks. By the way, I am still persevering with using Squeeze-CTRL and have noticed that the up/down swipe on the now playing screen does affect the volume but in large jumps from which it sometimes jumps back quickly to where it was. Just mentioning out of interest. Cheers, David. *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Hi Sam, I have been noticing the slide up/down volume interface when using MS very jumpy and sometimes non-responsive then it jumps to a different volume. I have increments set at 2%, could possibly just be lag in my system? All while using Denon receiver. Have attached a debug in case you feel like taking a look. Regards, David.39053 +---+ |Filename: server.log(31).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=39053| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > And... it works!! Just tried it out and, after pausing the player and > waiting 15 minutes (value used for testing purposes), it turned off the > player, thus triggering the Denon plugin to power off the AVR. This is > really a nice feature because the Denon plugin will only power off the > AVR if the input source is still set to the one associated with the LMS > player. Therefore if, in the meantime, the input had been switched to > TV, for example, the AVR would not be turned off, thus avoiding a > possible family crisis. > (◠‿◕) Thanks for trying it out, I have installed it but haven't yet had a chance to give it a run. I had never given it much thought when I have seen it in the list but it will be very useful at my end apart. Some mornings I find my SBT units have turned themselves on during the night, luckily I do not have them set to auto-play! Not sure what causes them to turn on as it is always both of them and it does not relate to power outages, especially having household battery back-up. Now hopefully if they turn on randomly they will power down after the preset period. Funny story, years ago I did have them on auto-play and I was overseas at the time when they turned on, but they also turned on at near full volume, much to the neighbour's annoyance and amusement. Luckily, after they contacted me I was able to control the system remotely and turn it off. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
mctr wrote: > Here's a strange error I'm getting. Seems to happen when I power off my > Squeezelite and thus Marantz AVR while something is playing. As far as I > can tell if I stop playing first, it doesn't happen.. Errors starting at > line 43 and repeats endlessly, I am having to kill the processes and > restart LMS or it basically doesn't work anymore. Sam, this problem also occurred one time while I was using V4.7 release yesterday, but because I couldn't replicate the conditions that caused the issue I was going to wait for it to happen again to report it. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Glad to hear. Here's a little tip for you. Go into Material Skin's > "Settings->Player" menu while your Denon player is active and scroll to > the bottom where you should see the "Denon/Marantz AVR Settings" menu > option. Press and hold that option for a second or so and it will be > pinned to your home screen for easier access. As you will discover, MS > is ultra-configurable --- one of its major strong points. Good tip, sweet! I am seeing an unexpected behaviour, you may be able to help me out. I have been using MS for control, and my primary receiver Zone is z2. I also have LMS connected into z1. Power on LMS, z2 comes on, can play music and control volume etc. Select z1 in zone menu, z1 powers up, again vol etc. controls perfectly. Select z2 in zone menu, z2 is now controlled for vol. All great and running smoothly. Now turn of the LMS (via MS) and LMS powers off, but Denon Z1 & Z2 stay on. Turn LMS back on (MS) and I can turn Z1 & Z2 off using Denon AVR settings and they turn off. Then power down LMS (MS). I had debug on while I was trying it out, attached just in case you want to have a look. 38970 Earlier in my testing, may not be in the log file, I found no responses at all for volume or on/off by the receiver, and I could only resolve it by rebooting pCP (and by default LMS). This happened a couple of times. Cheers, David +---+ |Filename: server.log(30).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=38970| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > No. It works great for me, as I said before. You probably need to set > Material Skin's "Fixed volume players" plugin option in "Server > settings/Plugins/Material Skin" to "Display standard volume control", > which is documented in the Denon AVP/AVR Control plugin's wiki pages, > linked from its setup menu. I'm not sure why that option is in the MS > plugin menu rather than in the app settings. Maybe Craig can comment on > that. Let me know how it goes. Hi Sam, correct again! My bad, have set as suggested and all good on MS. Thanks again. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Good idea. However, if you like the swipe up/down volume control method, > you should check out the Material Skin app/plugin. It has the smoothest > implementation of it that I have seen. I encourage you to give it a try. Hi Sam, I am using the V4.7 of Denon plugin still, and have taken your advice to give Material Skin a try, very impressed! Interestingly though, and it is likely me doing something wrong again, I have set it up for left/right swipe track selection as well as up/down swipe volume adjustment - left to right works correctly but up/down has no effect on volume, same situation as with Squeeze-CTRL. I have double check the MS settings and tried turning the settings on & off etc. but I can not get the up/down to respond. Did you find this with MS? Regards, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Good idea. However, if you like the swipe up/down volume control method, > you should check out the Material Skin app/plugin. It has the smoothest > implementation of it that I have seen. You have to both install the > plugin and side load the Android control apk to use it, but it's worth > the effort. Be sure to read all of the instructions carefully. I > encourage you to give it a try. I will take a look at it. I did try to go back from the beta version by replacing the two beta files with what was there pre beta, but it didn't revert completely, still some remnants of the zone menus, so I am back on the beta. I could remove the plugin and then reinstall but I am happy to stay with the beta for now, maybe Material Skin is the answer. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Okay, David. It sounds like everything is working as expected. I also > have observed the behavior you're seeing with Squeeze Ctrl but I can > assure you it has nothing to do with the plugin. You might want to > download the Squeezer app for comparison. If you do, you'll notice that > there is an additional menu available there for adjusting the relative > channel volumes (basically a balance control for zones other than the > Main zone). Thanks for your help in the testing effort and let me know > if you run into any more problems. Hi Sam, I already have the Squeezer app on my phone, and having tried both I preferred Squeeze-CTRL, mainly for the up/down swipe vol control interface. While the plugin is not controlling the behaviour, I suspect that the use of the revised plugin has caused the change in behaviour. As a test I am going to reinstate the previous version of the plugin and see how it runs. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Sounds good. Did you get the "Power on volume" for Zone2 set up and > behaving the way you want? I haven't had a very long testing session yet, access to Z1 of the Denon has been limited due to it being wet here and others deciding they want to use it! In the brief sessions that I have managed I would say that it is working well and I have the volume level issues sorted. The only downside I am seeing is the interface with Squeeze-CTRL regarding volume control. As mentioned before, the swipe up/down on the "now playing" screen does not adjust the volume as before, but does affect it albeit in varying increments and randomly, sometimes increasing during a swipe down, plus there is no onscreen report of the volume level anymore. It I select to have the "pop-up" on, then when I swipe up/down a pop up volume bar appears which I can use left to right and it shows vol level, still not ideal. Also, the fixed vol controls on bottom left of the screen do function, but again there is no report of vol level on screen. I will get to do a longer test at some time soon. Regards, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Just want to make sure you saw the edit to my previous post, David. Yes, pretty sure it wasn't me, have checked my download folder and both files were downloaded. I have deleted the .txt from both and installed, but haven't had a decent chance to test properly yet, maybe later today. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > I didn't say that, David. I said you can do it on *_Zone_2_*, as shown > in the manual. You just have to find the right menu. Do you have the > manual? If not, it's easy to find online. > > > > Congratulations! You found one of the bugs fixed in the next revision, > which is attached. Don't forget to rename both files to remove the .txt > extension. > > EDIT: And here are pages 172 and 173 of the manual for your edification. > Note that the subject is "ZONE2 Setup". 38942 My bad again, Z1 was a typo, yes, have found the menu for Z2 setup of on volume. Haven't installed the revision yet, will do now, without .txt! Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > David, I can assure you that the initial volume for Zone 2 can be set in > the menu of your AVR-X3000. Below is a portion of page 173 of the > manual, which specifically documents the Zone 2 audio settings. As I > said, the Quick Select settings have nothing to do with it. Once you > have found and set this correctly, you should be fine. No need to > manually work around it. I will soon be posting a newer version of > Plugin.pm for you to continue testing with. It is more efficient at > switching between zones and also contains a couple of bug fixes. Thanks > for your help and for the positive feedback. > > 38939 My bad, I must admit to rushing a bit this week, been a busy one. Weekend coming, will be able to take a better look through everything. Correct that I can set Z1 on volume as you stated. Not sure what is going on but once I set it to "Last" the amp started acting unusually, and wouldn't switch on or off via Denon plugin. Eventually had to disconnect from mains and wait then reconnect. All fine for a while then it did it again. On & off via remote and it started behaving again. I have now set power on vol to a numeric value and it seems to be working. In switching between zones via plugin at one stage the track playing restarted, which is odd. It only did that once, and it was while I had power on V set to Last. Time to install the further revision, me thinks. Will do so and try it out. Again, thanks for all of this. Cheers, David. *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Upon further reflection, I will not be changing this behavior. Just set > the Denon's Zone 2 "Power On Volume" according to your liking. Note that > it can be set to "Last", meaning where it was set when it last powered > off, which is what I would recommend in your situation. You probably had > it set to a high value because you were running the player at variable > output level before. Please continue testing and let me know if you run > into any more problems. > > > > It seems that you inadvertently turned on the "Show Popup" option in > Squeeze Ctrl's Volume Options settings when you were in there. Turn it > off and the swipe up/down volume behavior should be back to the way it > was. Hi Sam, I am enjoying the way it is working very much, its main fuction with regard to controlling separate zones is great. Re the volume jump after turning default zone off and then back on using the plugin menu, I have checked every setting I know of, in particular QuickSelect where I have now set the on volume quite low for Z2. Along the way I have tried setting the volume via the receiver but the only options for Z2 is variable or a set volume (which doesn't work with fixed volume for LMS) and the option for last is not present for Z2 (it is for Z1), apart from Quick Select I can see no option for setting the on volume for Z2. The volume jump still occurs, and is to around 60 or so, where my general listening level is within 20 to 50. I can live with this, I will just not turn Z2 off if I think I might want to turn it back on in the same session, I will just turn its volume down to 0. The Squeeze-CTRL interface is evolving. As you noted, I had turned the Show Popup on, but only in an attempt to see if it had any effect on the loss of swipe up and down on cover art function which I use, but it didn't. Oddly enough, when I turned the show popup off today it partly restored the swip up/down function, but it is very jerky, I suggest that it is responding very slowly and at the moment is virtually unusable. I am able to use the std volume control function though so again I can work with it. Log file attached: 38938 Having reported all of that I must say the function is amazing, and you must be congratulated for what you have accomplished, well done! Cheers, David +---+ |Filename: server.log(29).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=38938| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > You did something wrong but the server log is not helpful. Check that > you correctly renamed Plugin.pm.txt to Plugin.pm (case sensitive) in the > plugin directory. If you can't spot the problem, send me a "ls -l" > output of the directory contents. In the meantime, you can test with the > previous version after setting the Squeeze Ctrl options from my last > post. Sam, you were correct about .txt still on the file, all corrected now. Starting with default zone only, Z2, the zone selection menu is there and I can select another zone. When I select Z1 it turns on and selects the correct input and I can control the volume now independent of Z2. By then selecting zone selection Z2 I can now control volume in Z2 independent of Z1. That all works very nicely. Given both zones are on, if I select one of the zones (e.g Z2) I can then turn it off by selecting it in the top line of the menu where it says Zone 2 on, and it turns that zone off. Again it works well. My only grumble is that when I turn that Zone (in this case Z2) back on by selecting it again in the top line it comes back on but with a much higher volume than either zone is/was being played at and certainly not the volume it was set at before being turned off then on, and certainly not the volume the other zone is set at. It may be something that I have preset elsewhere so will take a look, but that high volume level has varied each time, sometimes 60, sometimes 69... etc. There has been a change in the volume control behaviour in Squeeze-CTRL that I do not like. Previously I was able to swipe album art up or down to control volume, now swiping the album art brings up a slider volume control which I have to swipe left/right. I can not see that any squeeze-CTRL settings have changed. Have you seen this change? I would have attached a log file but when I just checked it the logging was not set to debug for the app, it had reset itself to error. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > The volume controls in the Squeeze Ctrl app should control the volume of > whichever AVR zone is currently selected. My bet is that you have > forgotten to turn on the rather cryptically named Squeeze Ctrl settings > option "Preferences->Controls->Volume Options->Fixed Volume Send > Command" as mentioned in the plugin's Wiki pages (see below). Also make > sure you haven't turned on the app's "Hide Volume Controls" option. > (Why would you want to do that anyway? :-) With those settings, you > should be good to go. Did you update to the most recent version of > Plugin.pm? You are correct that I had missed the most recent version of plugin.pm. I replaced the older one with it and now the Denon AVP Control plugin has disappeared from LMS. I then reverted to the previous beta and the plugin was then reinstated in LMS. Log attached. 38930 Cheers, David +---+ |Filename: server.log(28).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=38930| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > It sounds as though you don't have the player's audio settings set > correctly. See the notes from my previous post: > > > > > - The player's "Volume Control" LMS Audio option must be set to > "Output level is fixed at 100%" for the Zone menu to appear. > > > > This is required in order for the zone volumes to be individually > controllable. I'll look at the log file to verify when I get to my > computer. > > EDIT: Verified > > > Code: > > [22-10-19 16:19:04.4614] Plugins::DenonAvpControl::Plugin::commandCallback (2207) *** DenonAvpControl: commandCallback() Power On for AVP/AVR model: AVR-X3000EUR > [22-10-19 16:19:04.4624] Plugins::DenonAvpControl::Plugin::commandCallback (2208) *** DenonAvpControl: commandCallback() Player output level is: Variable > > Well spotted! I have now set the volume output level to 100% and I can now see the zone control, and have been able to select between Z2 (default) and Z1. Z1 automatically switches to the correct source, same as Z2. Only problem I am now getting is volume is at 100% with no control other than at the receiver, which isn't workable for Z2 due to remoteness of listening area to receiver. Maybe I have missed something else? Cheers, David 38928 +---+ |Filename: server.log(27).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=38928| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
DavidBulluss wrote: > Intalled and ready to try it out but it may be tomorrow before I can. > > Cheers, David Have just manage a quick play. I commenced with the receiver turned off for both Z1 & Z2. I am using Squeeze-CTRL. I navigated to settings - Denon/MarantzAVR settings and there are options available for my default zone, Zone:2 Power: and in the next two lines Quick Select, and also Input Source Select, both of which expand upon selection to provide options as expected. I could not see any way to turn Zone 1 on. I then turned Z1 on manually by remote. Still no option to turn Z1 on or to control inputs etc. Should I be seeing options for the Z1? If so, am I looking in the incorrect menu? I have attached a log file that may or may not be a help, it should show from before I turned LMS (Z2) on by Squeeze-CTRL with Zone 1 already turned on. Cheers, David.38923 +---+ |Filename: server.log(26).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=38923| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Here it is, David (and anyone else who is interested). As usual, copy > the attached perl modules into the DenonAvpControl plugin directory > after renaming the old ones, e.g. Plugin.pm->Plugin.pm.save, and restart > LMS. Oops! The Plugin.pm file is too large. I had to rename it to > Plugin.pm.txt to upload it. Rename it to Plugin.pm in your plugin > directory. Intalled and ready to try it out but it may be tomorrow before I can. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > As you might gather from the title, the next release of the plugin will > add the ability to stream to and control multiple zones of the same AVR > from one LMS player. Control is switched between zones from the Audio > Settings menu and each AVR zone may be turned on and off individually. > All volume and muting requests from the player are directed to the > currently active zone. For both technical and practical reasons, this > feature is only available when running the LMS player with volume fixed > at 100%. I have done fairly extensive preliminary testing using my Denon > AVR-3311ci. However, I currently have no secondary zones set up. Since a > few users have requested this feature in the past (I'm looking at you, > @DavidBulluss), I am hopeful that one or more of you might be willing to > assist with the testing effort. While I believe that these changes meet > or exceed the functional requirements of multi-zone support, I am open > to suggestions for tweaking it. Please contact me here or through a PM > if you are interested. As of right now, only the Squeezer and Squeeze > Ctrl clients are supported, as Material Skin has a problem handling a > technical aspect of the new menu which I am hopeful will be resolved > shortly. If anyone is interested in testing it with iPeng, that would > also be helpful. Here is a screenshot of the zone selection screen on > Squeezer: > > 38914 > > Thanks. As anticipated, I am very interested to test it out. Count me in! Cheers, @DavidBulluss ;) *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Hi, David! It's been awhile since you've posted here. Glad you're still > finding the plugin useful and thanks for mentioning Squeeze Ctrl as > another client app that supports the AVR Settings menu, although its > inability to handle slider controls means that the Channel Level > Adjustment menu is not available there. > > Regarding the ability to control multiple zones from the menu, I know > that is something you and some others have been interested in for awhile > and I have given it a lot of thought. The basic problem is that there is > currently a one-to-one correspondence between an LMS player and a > particular AVR/Zone combination. On the plus side, this means that you > can theoretically have a different player assigned to each Zone of an > AVR. These players can be any combination of hardware-based and > software-based (e.g. Squeezelite) players. From what I remember about > your situation, what you are looking for is a "virtual" player for Zone > 2, creating a one-to-many relationship from player to AVR/Zone, which is > more complicated than I initially thought. Just to make sure I > understand the situation correctly, walk me through what you want to be > able to do, from an end-user standpoint and without regard to technical > limitations. > > As an alternative, have you considered adding an additional player to > your system, either hardware or software-based? This approach provides > the most flexibility and ease of use for a multi-zone system, especially > when using the extensive player synchronization features available in > LMS. For example, I have two Squeezelite player instances running on my > RPi, one outputting through HDMI to my AVR under control of the plugin > and the other through Bluetooth to my patio. I could easily change the > output of the second (Bluetooth) Squeezelite player to go to a USB DAC > and then to an analog input of the AVR for use in any Zone I choose. > Just a thought. Hi Sam, yes, I have been quiet, getting a bit of travel to warmer places during winter now that covid has backed off and international travel restrictions have eased up. I have a couple of hardware players hooked up to different Denon receivers. One of them is in an area of the house where an indoor area has opening doors to the outdoor area. Having said that, I rarely use the hardware players and generally use software Squeeze CTRL on my android device. This particular player/receiver combination Zone 1 serves indoor, Zone 2 outdoor. During warmer weather I tend to use Zone 2 (outdoor) mostly and have it set up that way as quick select input and as such only Zone 2 turns on when I start Squeeze CTRL (unless someone is watching TV/video/gaming indoors in Zone 1 in which case Zone 1 is often already on). It would be convenient to be able to switch Zone 1 on from Squeeze CTRL and then select the SBT input for that zone also from the Squeeze CTRL app, also being able to turn Zone 2 off if it happens to be on. Not so concerned with volume control for Zone 1 being separate from Zone 2 as generally I wouldn't run Z1 & Z2 together, and if I did they would be playing the same music. Does that make sense or have I made it sound confusing? Cheers, David. *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Thanks for the positive feedback, @SMC. It is greatly appreciated. > Sometimes it feels as though Chris and myself are the only ones who use > the plugin, especially when it comes to the Audio Settings menu > functions. I'm happy to hear that you are taking advantage of the > integration with iPeng. Squeezer and Material Skin are two other client > apps that also offer access to the AVR settings via the plugin menu. Installed the update yesterday and managed to get a quick play with it. It works well, and the interface in Squeeze CTRL is perfect. Just a question, if you have been able to include input selection into Denon AVP plugin then how far can you take that? Is it possible to incorporate turning on/off other zones on the same Denon receiver? Just a passing thought. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Mixcloud plugin?
Hi again, it still failed using cache but then persistent mode appears to work. Thanks both for your help. Cheers, David Paul Webster wrote: > Settings/Advanced/Network/Streaming Mode For HTTP(S) > > However, you need a relatively recent (1 year?) LMS for the option to be > available. *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=88286 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Mixcloud plugin?
Hi Paul, thanks for that. Have found the setting and I have gone Cache initially, now to go and try it out! Cheers, David Paul Webster wrote: > Settings/Advanced/Network/Streaming Mode For HTTP(S) > > However, you need a relatively recent (1 year?) LMS for the option to be > available. *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=88286 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Mixcloud plugin?
Hi Dennis, thanks for your help on this. What you say makes a lot of sense. Is the serversettings ---> network within LMS settings? I have looked through most of the obvious pull downs and can't find it. If you wouldn't mid pointing me more precisely in the right direction that would be appreciated, thanks! ->cortegedusage wrote: > Hi David, > > You might want to try and go to serversettings ---> network and there > enable "persistent mode" or "cache http(s) streams on disk". > This forces LMS to try again, or download the whole file. > > That said, the mixcloud plugin and the way it depends on a third party > mixcloud download site, isn't that stable, I still have issues that some > streams it won't play. > but caching seams to be the best way. > > cheers > dennis *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=88286 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Mixcloud plugin?
Hi Paul. I have only just installed mixcloud plugin and I am experiencing a glitch. I installed it via LMS Settings - Plugins and selecting then saving & restarting. I then followed link to API key which I copied and pasted in to Settings - Advanced - Mixcloud and saved. Glitch is that podcasts that I have tried so far only play around 50 seconds in and then stop. Selecting play starts them playing from 0.00. Any thoughts? I am running LMS nightly with latest update on Raspberry pi with pCP latest version. Cheers, David. *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=88286 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Absolutely! Quote away! ;-) > > > > Just to be clear, the slider controls do not work correctly on Squeeze > Ctrl with any zone. For players using volume fixed at 100%, this affects > only the Channel Level Adjustment controls. For those using variable > volume level, it also affects the Preamp Volume control. Some of the > other menu controls also do not perform in exactly the way they are > intended with Squeeze Ctrl, although they do with both Squeezer and > iPeng. Gotcha, will have a play anyway ;-) *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Ha ha!! That's exactly what I would have done, David. "Whatever you do, > don't press the red button!". > > Chris and I have not been successful in getting the Squeeze Ctrl > developer to look into the problem but, if you want to take a look at > how the slider controls are supposed to work, install Squeezer. It's > completely free and I use it 90% of the time. There are a couple of cool > things in Squeeze Ctrl that Squeezer doesn't have, such as displaying > the Now Playing info via Chromecast, but Kurt, the Squeezer developer, > is very responsive and has cooperated closely with both Chris and myself > on numerous occasions. > > By the way, since you are one of the few users who are known to run more > than one simultaneous instance of a Denon-enabled player in your LMS > system, I thought you might like to know that the plugin is now > theoretically capable of supporting an unlimited number of concurrent > players/AVRs/Zones. So don't hesitate to buy more > AVRs/speakers/rPi's/etc until you have speakers in every room, including > bathrooms. ;-) > > Take care Can I quote you to my wife when I come home with a couple of more AVRs and a truck load of speakers? - LOL Actually I have had Squeezer for quite some time, but for some reason I have prefere Squeeze CTRL. Having said that I will give it a run to check out the settings for Zone 2, although I could experiment with Squeeze CTRL on Zone 1 of my other amp, I guess. ;-) Cheers, David. *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > V4.4.1 of the plugin is now available. Thanks Sam, updated and the Zone 2 Quick Select works very well. Just an aside, as you told me that the Channel Level Adjustment and Preamp Volume does not work with Squeeze CTRL for Zone 2 I just HAD to try it. Nil effect on Channel Level, but adjusting Preamp Volume at all kills the sound completely. Brought back to life by choosing the Quick Select # , sound then all good! For a moment I thought curiosity had killed the cat! LOL Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > No need for a log file, David. I was able to recreate the problem here. > I also found and fixed a few other minor bugs in secondary zone menu > processing that will be in the next release. I'm assuming you have > discovered that the menu Preamp Volume and Channel Volume Adjustment > slider controls don't work correctly under Squeeze Ctrl, which we have > no control over. For that reason, I recommend the Squeezer Android > client when using the plugin settings menu. The plugin release > containing the fix for your problem should be available in the coming > week. Thanks for your help. Thanks Sam. I haven't actually tried the Preamp volume and Channel Volume Adjustment so no issue there. Elsewhere in the house I use Zone 1 with another Denon amp and separate Logitech Squeeze Touch so will give that a run with those controls to see how it goes. No hurry on the next release. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
DavidBulluss wrote: > Whoops, certainly did miss turning logging on! Would it help if I > uploaded a real log file? Thanks for the tip on the Song Info plugin. It > generally behaves but every now and then it has no info, usually on > obscure tracks. > > Cheers, David Debug log file attached just in case it is useful. 37138 Cheers, David +---+ |Filename: server.log(25).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=37138| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > David, if you would like to have it before then, let me know and I will > upload the changed modules. > > P.S. I think you forgot to turn debug on for the Denon plugin Whoops, certainly did miss turning logging on! Would it help if I uploaded a real log file? Thanks for the tip on the Song Info plugin. It generally behaves but every now and then it has no info, usually on obscure tracks. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Aesculus wrote: > I have not looked at the log yet so it may be clear in there. I'll let > SamY handle that. It may be a quirk wrt the Zone. > > If you manually save the QS on the Denon (on my old AVP I just press and > hold the QS button until the display changes) does it show on the > display? Hi Chris, short answer is no. When I use zone 2 I usually leave Zone 1 turned off (unless someone else is using it for TV etc.) If I turn Zone 1 on also then a settings saved msg appears but is non specific as to whether it is saving for Z1 or Z2, or both. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Aesculus wrote: > Dave: When you press the Save Current Audio Settings can you look at the > Denon and see if you get a message on that screen that says it's saving > the Quick Select? It's pretty quick so you need to be in front of it > when you make the selection on the phone. Nothing on the amp screen. I am using Zone 2 on the amp if that is important? *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Hi Sam, I am using Squeeze Ctrl on android and am finding that during play I have increased the Denon volume diectly using remote or other means from 64 to 75 or so then gone to SETTINGS in Squeeze Ctrl, then DenonAvpAvrControl, Quick Select, and selected Save Current Audio Settings. Msg appears "Audi settings saved...". I then turn off Touch via Squeeze Ctrl. When I turn it back on the Denon amp has defaulted back to the lower volume of 64. Am I doing something wrong? Zip file of log attached.37124 Regards, David +---+ |Filename: server.log(24).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=37124| +---+ *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Don't Stop The Music DSTM and Tidal?
Michael, TIDAL is working beautifully with DSTM. And not a Sptify track in sight! You are brilliant, thank you very much. Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=115876 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Don't Stop The Music DSTM and Tidal?
mherger wrote: > > Is there anywhere that I need to go to to change settings in LastMix > so > > that it picks from TIDAL? > > No. It would use the first music service available, with lossless being > > preferred over lossy. So even if you had Spotify and TIDAL enabled, the > > latter should be picked. Brilliant! Now to subscribe to TIDAL... :-) *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=115876 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Don't Stop The Music DSTM and Tidal?
mherger wrote: > use the LastMix plugin to create the mix. Brilliant, I didn't think of that. I have been using LastMix with DSTM since you created the plugin quite a while ago now. I have the "LastMix - Don't Stop The Music support using Last.fm box selected in DSTM. Is there anywhere that I need to go to to change settings in LastMix so that it picks from TIDAL? *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=115876 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
[SlimDevices: Plugins] Don't Stop The Music DSTM and Tidal?
>From what I can see DTSM does not have an option to include TIDAL as it does with Spotty. Just checking that my conclusion on this is correct before I give up on the idea. Anyone able to enlighten me? Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=115876 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Okay, here it is. The attached beta plugin files implement the ability > to update the active AVR Quick Select definition from the client plugin > menu using the current audio settings. The specific settings that are > saved with the Quick Select definition seem to vary with different AVR > model lines so you may find that not all of those available in the > plugin menu are saved. For instance with my 2011 model, the restorer > mode isn't saved. Consult your owner's manual for more details. As part > of the plugin's client menu extension, this function is only available > for players using the main AVR zone and only supported for clients that > fully implement the plugin's menu -- at this time, Squeezer (Android) > and iPeng (iOS). It has not yet been tested with iPeng as I have no iOS > devices. Here is a screenshot of the new Quick Select menu on Squeezer. > Note the smaller font on the second line of the menu entry. If you test > this, let me know whether the font looks like that on your device. At > this time, there is no second-level "Are you sure you want to do this?" > logic so just ask yourself that question first, although any unintended > changes are easily correctable. If you need any guidance on how to > update the plugin files on LMS, please ask. Don't forget to cycle LMS > after replacing the files. As always, feedback is encouraged and > welcomed. > > 36829 I have loaded the files in and restarted, nothing broken. Then I realised that I am using Squeeze CTRL, not Squeezer... not sure how to get to a menu that looks like the one on Squeezer, but I will endevour to see if there is. Cheers, David. *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > I think I know what's happening with your settings, Giunti. Most of the > audio settings found in the plugin menu, including the restorer mode, > are part of the Quick Select definition. Therefore, every time you > invoke the QS 2, such as when starting up the LMS player, the settings > revert to those saved in the QS. I have been thinking of updating the > plugin's audio menu to allow the user to save the current audio > settings, including volume, to the currently active Quick Setting. This > might just be the time to do it. Stay tuned... > > https://manuals.denon.com/AVRX1500H/NA/EN/GFNFSYtqmfznoe.php Hi Sam, I would personally back that move :-) Cheers, David *Server*rpi3 pCP8.1.0 LMS8.2.0 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*Z2 > Krix Tropix/Klipsch SW *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > I'd like to get an idea of how many users of this plugin there are out > there. I know that, in my case, I was using it for more than a year > before discovering this forum so it won't be accurate. But, if you're > seeing this post, just reply and provide a short description of your > setup if you can. Here's a template to use based on my system: > > > > > - AVR(s): Denon AVR-3311ci - LMS Platform: RPi B+ - OS: Debian Jessie - Client(s) in use: Squeezer, Squeeze Ctrl - Number of players using the plugin: 2 > > > > > Any additional info is welcomed, along with comments and questions. > > Thanks. AVRs: Denon AVR-X3000, AVR-2113 LMS Platform: RPi3 pCP8.1.0 LMS8.2.0 OS: Linux 5.10.77 ? Clients in use: 2X SBT, Squeeze CTRL Number of players using the plugin: 3 Regards, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Aesculus wrote: > Just checking in to make sure that everything being quiet here is a good > sign. Some of the new features are a bit more subtle but they do improve > the usability quite a lot. > > You can make sure you are on V4.2 by going to the server settings and > plugin tab and check the value for DenonAVP/AVR Control. Hi Chris, no issues to report here, all appears to be behaving! But I have been interstate and away from the system for a week so haven't been able to give it a very good thrashing yet :o Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Hi, Patrick. Chris and I have both been pretty busy lately but I wanted > you to know that this feature has been coded and tested, and will be in > the next release of the plugin. Thanks for the suggestion. Sam & Chris, you have been doing an amazing job with this plugin, really appreciated! It is working extremely well, and despite my initial hesitancy regarding the SBT and amp not being controlled simultaneously for volume level I am loving the way it is now set up... when the SBT is swithched on the amp is pre-set to my selected volume, and SBT is volume controlled, is working very well! Thanks! By the way, having an option to leave the amp turned on when closing SBT down is a good one but not an urgent one for me. Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > So do you turn Z2 off with the Denon remote, or do the Z2 speakers have > their own on/off switch? You can't power it off with the LMS client app, > since that would stop playback in both zones. When moving the "party" completely from Z2 to Z1 I do use the remote to turn Z2 off. Regards, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > One more question, David. When you are listening in Z1, what do you do > about the fact that Z2 is also on? Do you just let it play out there too > or do you mute it, either in the app or using the Denon remote? It depends on circumstances at the time. Sometimes I let them both play, that is usually when entertaining and I keep the vol fairly constant and set Z1 vol using the Denon remote, other times I just turn Z2 off if we are moving inside from being outside. No real pattern to it. In consideration of every thing I *may* set up one of my spare android phones as a LMS and connect it to either Z1 or Z2 rather than having them both fed by the SBT and try that for a while :-) I also have another player Squeezebox Touch set up in another part of the house connected to another Denon Z1 only, not using Z2. Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Coincidentally, however, another plugin user made an enhancement request > just yesterday to allow for this situation to be supported. The way it > would be done is to allow for switching zones on the fly via the client > app menu. So, in your scenario, if you were listening to music in Zone 2 > and wanted to continue listening in the main zone, you would switch > zones in the app. This would power on the main zone and switch the > control to it, while optionally powering off the Zone 2 in the process. > What are your feelings about that possibility? That would be a great solution. You are correct that I have the app set up for Z2 and I do control Z1 using the remote as I am near the amp while using Z1. I find that as winter sets in (as it is now on my side of the equator) I use Z2 less and less until spring comes around, and during that time am using Z1 more and more. Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > At the risk of being redundant... > > Running with the Zone 2 LMS player output level set to 100% does not > mean that you lose the ability to set the Zone 2 AVR volume from your > LMS client app. And it has absolutely no effect on your main zone > settings. On the contrary, it will allow you to do EXACTLY what you are > trying to do. Just set the Zone 2 player output level to 100% in LMS, > define your Zone 2 Quick Select to set the initial Zone 2 preamp volume > when it is powered on, and use your client app from wherever you are, > whether it's on the porch, at the neighbor's house, or anywhere else in > range of your wifi router, to control every aspect of the player, > including the volume. It's a no-brainer, and is the way the plugin was > meant to work. I am still waiting for someone to present me with a valid > scenario that would require, or even make sense for, running the plugin > with variable LMS player output. I'm starting to understand why Peter's > Denon plugin requires that it to be set to 100% or it won't even start > up. I blame much of the confusion regarding this issue on the wording of > the LMS player menu option description, which is unclear and prone to > misinterpretation. Anyway, give it a try and keep enjoying your > Squeezebox experience. What if I am using only one LMS player feeding to both Z1 & Z2 of the amp? Both zones are receiving the same signal simultaneously. I will have a play with it all as suggested. Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Aesculus wrote: > But one thing that could possibly be done is to put a menu item in the > plugin that boosts up (or down) the current Denon volume, but only for > that session. This would work the same way as you picking up the Denon > remote and making that change for that Zone. And when the plugin turns > on again it would call the QS value that would set the volume to the > level you default to. That idea I really like! Again, maybe peculiar to my system is that Z2 is outside and quite a distance from the amp, and as such the remote doesn't work when outside. Yes, I know, set it before you go outside, but I usually turn the LMS on with Z2 when already outside. I will give the 4.1 beta a run :-) Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Aesculus wrote: > I would think then that the new method in 4.1 that only uses the LMS > volume would be best then. Before we had two volume reductions going on. > Now you only have the one. > > So in theory your volume with 4.1 set on variable should allow for a > louder overall volume with a lessor Denon volume setting. It may be, but does that mean I need to set Z2 (the neighbours love it!) to my maximum preferred listening volume when turning on via LMS and Z2 QS? If so, not desireable at my end as mentioned a little earlier. Hey, don't get me wrong, I love what you are doing, but I am thinking I won't install the new version after beta testing for those reasons. :-) Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
peterw wrote: > David, of you occasionally want to use other sources, I don't understand > why you wouldn't want the Squeezebox output fixed at 100% so that only > the AVR volume level changes. With SB audio output fixed at 100%, the > Squeezebox volume becomes this fictional thing, and plugins like ours > react to the Squeezebox fictional volume changing by changing the real > AVR volume. Then there's no worry that you'll face some dramatic change > in speaker volume when you change AVR inputs. You definitely don't want > the Squeezebox output level changing if your amp ever uses other audio > sources. Yes, I understand that logic, but for may set-up the missing part of the puzzle is that I sometimes run Z1 on the same amp I am running Z2 and I always set Z1 manually (it has the main household TV etc. running through it and source gets changed unpredictably by grand kids, spouse etc.) so I set it manually depending on the mood at a volume and adjust music vol using LMS. Hence keeping LMS variable suits. Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Aesculus wrote: > @SamY and I have have posted a new beta for version 4.1 > > https://github.com/aesculus/denonavpcontrol/blob/master/src/DenonAvpControl_4_1.zip > > The biggest change in this version is turning off sending volume control > functions to the Denon AVP/AVR if you are not using the 100% Fixed > Volume output setting in your player. This was causing two levels of > volume control. In this version, if you are using variable output in the > player, the plugin will just bypass any commands to alter the amplifier > volume. Hi Chris, I may well be the odd one out here but for all of its clumsy behaviour I actually really like having the two volumes adjusting together. If the amp volume is going to need to be set initially at my desired highest level (5db for example) it means that there is a 5db bomb waiting to explode should someone else select a different input for zone 2 without me having first turned it off. Currently I alway turn the volume down to a reasonable level unless I am listening intently to something so the amp is usually back down at 65%, or there about, when I leave it unattended. Maybe a switch for the new feature to be on or off? Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > The log looks good, David! Did everything seem to perform as you > expected? I wonder if you had a chance to try the "double pause" Quick > Select maneuver? A good way to demonstrate its usefulness is to switch > the AVR to a different input while you are listening to music and then > hit the client player pause button twice within .25 seconds. This should > trigger the Quick Select to switch the AVR input back to the SB player > and also resync the player volume to that of the AVR. Please keep > running with the 4.1 beta and let me know if you see any unusual or > aberrant behavior. I don't know if you noticed in the log that the Quick > Select is still timing out. The good news is that it doesn't matter any > more. The plugin now detects the timeout and continues on as normal, > synching the player volume to the AVR and awaiting the next LMS command. > > > As always, thanks for your help in the beta testing effort. Everything is working very well, all as expected, including the double pause which I just tried out... works very well! Thanks for all of the time that you put into this Sam & Chris. Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Indeed. I have deleted the updated modules I uploaded previously in > order to minimize any further confusion. The zip file is now the only > officially recognized source for the v4.1 beta. 🤣 Just for comparison of the latest 4.1 beta that I downloaded from Github here is a simple log file. Turn lms on, play, volume up... vol down turn lms off 34573 Regards, David +---+ |Filename: server.log(23).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34573| +---+ *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > It's a little hard to see it in the debug log due to all the YouTube > plugin errors but your Quick Select is still timing out, David. As an > experiment, try changing the Zone 2 input to something other than your > Squeezebox player and then turn the AVR off before powering on the SB, > the purpose being to see if the Quick Select command is actually being > executed correctly despite the timeout. Although everything appears to > work from a functionality standpoint, the QS timeout results in a > failure to initially synch the SB volume to that of the AVR. As suggested I set the Zone 2 input to another input (TV) and then turned it off. Turned on LMS and when amp responded it had selected correct volume and input (LMS) as per the Z2QS. It may be messy in the log but it gets there! Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > While it may appear to be running fine with v4.0, that is only because > the Quick Select is not being retried. It is still timing out after 5 > seconds. Btw, I have no idea what the QZ appearing on your AVR display > means and could find nothing by googling it. Is there a possibility that > you have somehow deleted the Quick Select 3 definition for Zone 2 in > your AVR? If that were the case, it would result in a timeout of the > Z2QUICK3 command. I went back and looked at one of your previous debug > logs from a month ago and you were getting a response time of a little > over 2 seconds for that command then. In any case, I know now that the > new code is not causing the timeout. It's just that the plugin is > reacting differently to it now. I'm not sure if raising the timeout > interval even higher would be productive except for seeing how long the > AVR is actually taking to respond now. Can you think of any reason that > your network response time might be that much slower now than a month > ago? It's a little suspicious that both you and Mars are seeing the > timeouts happening on the same Z2QUICK3 command, but I really don't > think the reason has anything to do with the plugin. Mars was able to > significantly reduce his response times previously be resetting his AVR, > which I asked him to try again. In my next beta update, which should be > coming in the next few days, I will increase the timeout interval value > to something ridiculous like 30 seconds for testing purposes. Until > then, keep running v4.0 and, as always, thanks for your help. There was a possibility that I had inadvertently affected Z2QS when I was having problems with 4.1 beta so have reset Z2QS and it appeared to work well.New log 34509 to look at. Regards, David +---+ |Filename: server.log(22).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34509| +---+ *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > I would like you to go back to v4.0 and run the same power on sequence > with debug on so I can see if the timeouts are happening there too but > being compensated for in some way. All appears to be running fine in V4.0, as before. 34508 Regards, David +---+ |Filename: server.log(21).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34508| +---+ *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > It appears that you are running into the same problem as MarSOnEarth, > where the plugin is going into a Quick Select timeout retry loop after > powering on successfully. I am working on a code change to prevent the > retry loop but, as with Mars, I have no explanation for why the Quick > Selects are timing out, especially with the timeout interval of 5 > seconds that was put in awhile ago to address timeouts you were having > when the interval was 2 seconds. If it's not too much trouble, I would > like you to go back to v4.0 and run the same power on sequence with > debug on so I can see if the timeouts are happening there too but being > compensated for in some way. You should probably just keep using v4.0 > for the time being until I complete the updates I'm working on now. I am > assuming that all was running well for you with v4.0 prior to installing > the v4.1 beta. Is that correct? All was running well in V4.0 . I will run a debug on V4.0 once I get to install it. Regards, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Synching the volume at track changes was only supported for the main > zone prior to this release, regardless of whether the menu item was > selected or not. In attempting to add support for it, I overlooked an > issue that may have been the reason it was not supported before. Until I > can figure out a way around the issue, please turn off volume synching > for your Zone 2 player as you continue testing and let me know if you > run into any other problems. > > > > I'm not sure what you are saying here. The LMS client should still > control the AVR volume without the volume synching option selected. It > just won't re-synch it at every track change, which is ordinarily > unnecessary anyway. I personally never use this option except when > testing code changes. In this case, the problem you are seeing only > happens in secondary zones. > > Thanks for the feedback. Synching volume now turned off. Zone 2 tested 34507. Whwn turning on all is correct except QZ appears every few seconds on screen of AVR. Also, initially adjusting volume on LMS does not control the amp until I take the LMS volume very high then the amp vol jumps to life. After that no problems with volume control and QZ stops appearing on AVR screen. Regards, David +---+ |Filename: server.log(20).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34507| +---+ *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Aesculus wrote: > I have updated the 4.1 beta source files in GitHub with the zone fix I have installed the new 4.1 beta and have noticed that when using Zone 2 with the setting "enable synching the volume" ticked (as I have had it set previously) LMS adjusts the amp volume correctly but the volume reverts back to the start up volume approx 3 seconds into the following track in the playlist. It appears that quick select is being triggered at the change of track. LOG file attached. If I untick it then LMS does not control the volume of the amp anymore, and of course the vol remains constant track to track. 34500 David +---+ |Filename: server.log(19).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34500| +---+ *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Good to know, although it seems like overkill seeing as each zone has > its own set of Quick Selects. It's an easy code change though. Any other > differences in recent models that might call for code changes? > Additional zones? I think you may find that the upper level models with 9 channels have 3 zones, but not having one am not sure ;-) As an aside to the 4 Quick Selects, both my amps have 4 and one is fairly old but they only have 3 select buttons on the front fascia, QS 1, 2, & 3. *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Good news! I was able to re-create the situation with my fix applied and > it worked like a champ. It will be included in v4.0. No more needless > trips through the house to fiddle with the AVR, David. You will finally > be able to achieve true "couch potato" nirvana. ;-) > > In other good news, I have been talking to the author of the Squeeze > Ctrl app about adding support for muting in the UI. While he informed > me that there is more extensive functionality for muting in the Windows > 10 version of the app (a separate purchase on the Microsoft Store), he > also indicated that a player can be muted and unmuted on the "Manage > Players" screen of the Android app by clicking on the speaker button, > which is directly under the power button. Sure enough, it works great. > Another thing I discovered on my own is that it is also possible to > trigger the "hardware muting" plugin function from the "Now Playing" > screen by pressing the "volume down" and "volume up" buttons in quick > (within 0.25 secs) succession. I'm really loving the Squeeze Ctrl app, > btw. One of my favorite features is the ability to cast the album art > and track info to the Chromecast on my home theater TV. It's a great > feature for laying back and streaming one of the Paradise Radio flac > streams, which I often like to do, without having to constantly check my > phone to see what artist/song is currently playing. All very interesting! Looking forward to 4.0 :-) *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Thanks, David. It's good to know it's not just me, although it sounds as > though it doesn't bother you as much. If my fix works out, I will try to > get it in v4.0. I'm just waiting for it to happen again now which, of > course, it never will. Sort of like your car refusing to make that funny > noise when you take it to the mechanic. It probably does bother me as much as you, needless trips to that part of the house to turn the amp on and off! I have always assumed it was to do with the wifi in the amp needing livening up or something non-technical like that. Look forward to hearing if it does it again in your system ;-) *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Hello all. I have a question for you. I regularly experience a situation > where my AVR won't respond to a "power on" command from the client, no > matter how many times I try. It only happens after the AVR has been > powered off overnight or longer, and the only way to clear it up is to > manually turn the AVR on and off. From then on, everything is > fineuntil the next time. I have isolated the problem to a timeout on > the initial 'PW?' command and, using a TCP client, have discovered that > it is not a matter of increasing the timeout value --- the command is > never responded to. My Denon is an AVR-3311ci and is 11 years old, so it > might be something specific to this model's firmware. I have coded a fix > and am waiting for the situation to occur again so I can test it. In the > meantime, my question is: > > Have you ever experienced this problem? If you have, how often does it > happen and what is your AVR model? If you experience it regularly and > would like to help me test the fix, let me know. Thanks. Yep, my AVR 2113 does it regularly, and solution for me has always to turn the amp on manually, then off again, usually all good after that. It doesn't seem related to how long it has been turned off though, I can go a few weeks without powering on from the client and it will be all good first up. At other times it may not fire up on first power on but turning off from the client and then back on often brings it to life. Regards, David. *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Thanks. This looks interesting but it's late here "up top" and I'm > headed to bed. Thanks. Good morning! I set the Squeeze CTRL vol incs @ 5 for all players. Log file attached is firstly for the Zone 1 AMP which did not respond at all to UP then DN mute control although it faithfully responded to the other two options. Secondly for Zone 2 AMP which did not respond to the UP then DN either, but faithfully responded to the other 2 options. It was a brief test period so will keep an eye on it. ;-) 34068 Regards, David +---+ |Filename: server.log(18).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34068| +---+ *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Thanks for the feedback, David. When you have time, I would appreciate > it if you could generate a debug log and send it, along with a > description of what you observed during the test. OK, first up AMP 1 Zone 2 turned on, music played. when muting the dn then up worked, but up then dn didn't. Simultaneous up&dn worked. Then I played with volume a bit and then up then dn worked. Turned off LMS & system. Next AMP 2 Zone 1 turned on. Mute via dn then up worked as dis simultaneous. Also experienced a period of muting not working. 34066 I hope that helps. David +---+ |Filename: server.log(17).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34066| +---+ *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
DavidBulluss wrote: > I will try the up then down again, but it wasn't working for me > yesterday although I may have been timing out on the 0.25 secs. Pretty > sure my phone is 2 buttons although one piece of plastic! Acts as a > rocker or both together. Will try both together. > > Cheers, David Pressing down then up or down and up works on my Zone 2. Up then down no result. I have just tried it on Zone 1 on a different Denon AVR and at first muting worked down then up, but down and up at same time didn't, nor did up then down. Interesting that it stopped working altogether i.e. dn then up wouldn't work and I must have tried it ten times. Then I used the phone vol buttons to greatly reduce the vol and after that it did (dn then up and also together, but still not up then dn. Then it went flaky again for a while. It is possibly my wifi I am guessing. If it becomes a feature I will turn logging onto debug and send it through. Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Pressing the buttons in either order should work, David. If your phone > has separate buttons for volume up and down, the easiest way is to press > both at once. If it is a rocker switch, a quick up/down or down/up > should do it. I feel that the .25 second time interval is sufficient and > that increasing it could lead to inadvertent muting. > > Have you tried activating the SqueezeCtrl option to mute on making or > receiving a call? It works nicely. I will try the up then down again, but it wasn't working for me yesterday although I may have been timing out on the 0.25 secs. Pretty sure my phone is 2 buttons although one piece of plastic! Acts as a rocker or both together. Will try both together. Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
DavidBulluss wrote: > Installed and ready to go but no time at the minute, heading out for the > day. Will have a good play with it later today. Looking forward to the > Easter egg! :-) > > Regards, David The Easter egg found and works like a treat! :-) The entire app is working beautifully with Zone 2, haven't check a Zone 1 yet but will tomorrow. One thing, because I am as thick as two planks sometimes I forgot the procedure for mute using the phone vol buttons was down/up quickly and I was trying up/down initially. Is it possible to add script for both options?. Also, for me, 0.5 sec would be a better limit from down/up. Great work! David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Happy holidays and happy testing! Installed and ready to go but no time at the minute, heading out for the day. Will have a good play with it later today. Looking forward to the Easter egg! :-) Regards, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > That's exactly what I hoped to hear. If you want to adjust the initial > volume when turning the Squeezebox player on, simply change the Zone 2 > Quick Select volume setting. Zone support is now complete (pending any > future bug fixes) and working as designed (if not better :o). I have > changed the Quick Select timeout value to 5 seconds and uploaded the > current (and hopefully final) version of both changed modules. Thanks > once again to DavidBulluss and MarSOnEarth for your help and cooperation > in testing the code changes. Thank you for persevering and getting it done! It is working beautifully. Thanks again! Regards, David *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Good news, David! First of all, we finally got a reply from the Quick > Select command, and you'll never guess what the response time was > 2.06 seconds! That's right. Your AVR was missing the timeout limit by > .06 seconds. Based on this, I will increase the timeout value for the > Quick Select from 2 seconds, probably to 5 seconds just to be safe. > Prior to version 3.0, it was 1 second. There is really no downside to > increasing it, as it will have no effect on users who get faster > response time. It's just more forgiving for those with slower networks. > > I need a little more information from you to investigate your perception > that the initial volume was louder than before. The zone 2 volume > reported in response to the Quick Select was 65dB, which should > correspond to the volume setting that you specified in your Zone 2 Quick > Select 3 definition. Can you verify that? If it is not 65dB, what is it, > and what, if any, value have you set up for the initial power on volume > of Zone 2? > > Good to see it is coming together well! My Zone 2 vol is set at LAST for power on. Volume that I had Zone 2 QUICK SELECT set for is 65 (guessing decibels as it is set within the DENON setup browser via network) which is reported by SQUEEZE CTRL as 85%. I have Denon AVP Control plugin set to max vol of -10. I hope that helps. Regards, David *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > That's the same log you sent previously, David. Did you remember to turn > debug on before running the test? Also, to make things easier for me, I > would appreciate it if you could start a new log file or just cut and > paste the portion that corresponds to the latest test. Thanks. Whoops! I accidentally picked up the wrong one and sent it to you, correct one from yesterday attached. 33924 Regards, David +---+ |Filename: server.log(16).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33924| +---+ *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > I'm glad it's all working from your point of view, but the Quick Select > continues to time out, which prevents us from syncing the client volume > accurately at power on. In comparing your log files to those of > MarSOnEarth, I noticed that his Power On commands (Z2ON) are > consistently being responded to in under .004 seconds, whereas yours are > more like .02 seconds, slower by a factor of 5. On the other hand, his > Quick Select commands (Z2QUICK3) are taking a little over 1 second to > respond. If we generalize from the Z2ON response times that all commands > on your system take 5 times as long as on his (probably not exactly true > but humor me), then the Z2QUICK3 command should take over 5 seconds to > respond. Since the timeout value for that command is 2 seconds, we're > probably just timing it out too early. So. Attached is a new copy > of DenonAvpComms.pm with that timeout value changed to 10 seconds. If it > times out with that value, then it's probably a bug in your AVR's > firmware and there's nothing we can do about it. If it doesn't time out, > we will see how long it took to respond and think about increasing the > QS timeout value accordingly. So give this it a try and let's see what's > happening. Thanks. Log attached. Again seemed the same at my end except that the start volume seemed higher, even though it read the same on the amp. Interested to see what you get out of the log 33913 Cheers, David +---+ |Filename: server.log(15).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33913| +---+ *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Well, everything looks great except the Zone 2 Quick Select 3 command is > still timing out. Did you notice anything unusual? I guess it completed > successfully? The next time you test, change the Zone 2 input manually > to something other than the Squeezebox player before powering it on to > see if the Quick Select changes to the correct input. Also make sure > that it is setting its initial volume to the value stored in the Quick > Select. Since the client volume is not getting synced to the AVR at > startup, you might notice an unexpected jump in the volume (up or down) > the first time you change the volume with the client. It's puzzling why > it's not responding to only the Quick Select command but I'm glad it's > working otherwise. OK, set Zone 2 input manually to something else, set volume of Zone 2 at 30. My QUICK SELECT volume setting is 65. Using SQUEEZER turn on of LMS worked as expected, with Zone 2 volume being set to 65 and correct input selected. Seems all good from where I sit :-) 33911 Cheers, David +---+ |Filename: server.log(15).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33911| +---+ *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Hey, David. Is it possible you didn't have debug turned on for your last > test? All I see is a Zone 2 power on (successful) followed by a Quick > Select 3 command that times out and then a Zone 2 power off (also > successful). There are no volume changes. I'm hoping maybe that's the > test when you didn't have the Zone 2 Quick Select set up. The problem > with the Quick Select timing out is that we don't get the response > containing the Zone 2 volume setting. The timeout value for that command > is 2 seconds, which should be plenty of time. The AVR may actually be > completing the action but the initial volume won't by synched unless a > response is received. The next time you test, try to do some volume > changing before powering it off. Thanks. >From memory I probably didn't change the volume during the previous log, I was more concerned about Zone 1 having not turned off! New log file attached :-) 33910 Cheers, David +---+ |Filename: server.log(14).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33910| +---+ *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Okay. Almost perfect is not perfect enough. This version will prevent > the plugin from sending volume requests that don't result in a change > from the previous value, preventing unnecessary timeouts. I have tested > it successfully in my system and it is working as designed so far. This > is another minor annoyance that has always been there but, as George > Harrison said, "all things must pass". :cool: Looking forward to seeing > some perfect debug logs... Latest files installed and tested. I thought there was an issue with the main zone of the amp remaining on after turning LMS off so I turned on debug and went through turn on, play track etc. and turn off and the main zone went off. Log attached. At this time I must say it is working perfectly but will have a better play with it after work today. Funny side to it was that initially I could get no sound from zone 2 after the updated files were installed but I tracked it down to not having Zone 2 QUICK SELECT set up! I thought I had, years ago, but the amp went in for repairs after a lightening strike a couple of years ago and they must have wiped some settings; all good now! 33906 Regards, David +---+ |Filename: server.log(13).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33906| +---+ *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Okay, David and Mars. Are you feeling lucky? Here is the latest version > of the beta, with actual support for the Quick Select command in Zones 2 > and 3. I have done all the testing I can without actually having a Zone > 2 or 3, included actually sending Z2QUICKn commands to my receiver > without any apparent damage so far. ;-) Loaded in and ready to test! Cheers, David *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Aesculus wrote: > @SamY and I have completed our updates to version 3.0 and it has now > been posted on GitHub. > > Look for it in the LMS Settings>Plugins tab over the next six hours or > so. Have update to V3.0, will let you know if any issues. Cheers, David *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > David and MarSOnEarth: > > Here is a new version of the beta code for you to try. If the client > reports its volume as 0 during power on, it will set it to 25%. This is > a temporary fix and there is actually a chance that it will work as > originally planned due to a change in how the client volume is > retrieved. I also made a change that I hope might reduce the timeouts on > volume changes by closing the socket after sending the request. Try it > out at your convenience and upload the debug log as usual. Thanks. Log file attached. Started up at 25% volume, increased from there as I gave incremental touches of on screen vol control (Squeeze CTRL). All seemed good. 33873 Cheers, David +---+ |Filename: server.log(12).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33873| +---+ *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
DavidBulluss wrote: > Log file attached. What I have noticed is that when first turned on and > track played that there is no volume. Turning up volume brings it > suddenly to life and volume is probably as it was when last played > before being turned off. No waking of neighbors :-) The other thing of > note is that when increasing/decreasing the volume using volume onscreen > buttons (Squeeze CTRL) it jumps in 10% increments. Apart from that all > good so far. > > 33852 > > Cheers, David Squeezer works quite nicely, but turning on the zone 2 volume sets at 0 still. Then it takes roughly 3 vol up presses on phone vol key to get volume. Log file attached. Possibly something to do with my set-up?Although, it wasn't doing that before I loaded the beta. :-) 33856 Cheers, David +---+ |Filename: server.log(11).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33856| +---+ *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Thanks, David. The debug log is very helpful. Unfortunately, the Squeeze > Ctrl app is letting me down again. For some reason, it is setting the > client volume to 0 during the "power on" sequence so that is the value > that the plugin retrieves and uses to synchronize the AVR volume. Thus, > no volume. Then, the first time you use the onscreen volume buttons, it > suddenly sets the client volume to its actual setting (in your case, > 70), which explains the sudden volume increase. I did, however, see > another possible way to sync the client volume to the AVR volume in the > log which might prove fruitful. The next version I upload will include a > change to test that theory. Your perception of the onscreen volume > buttons changing the volume by 10% is an illusion. Each press of the > buttons sends a +1% or -1% volume change. However, there are so many > being sent that the plugin and the AVR can't keep up and that's why the > volume appears to jump in larger increments. I have a couple of > suggestions: > > #1. Change the Squeeze Ctrl variable that controls the volume increment > of the onscreen buttons from 1 to 5. > #2. Try just tapping the button once every second or two to see if that > makes the volume changes seem smoother. > #3. Although Squeeze Ctrl is a very popular app with thousands of loyal > users, it does not play particularly well with this plugin. Just for an > experiment, I would like you to download the Squeezer app and try it > out. It is free so there's no risk. I think you'll find that it is quite > intuitive, easy to use and, among other things, will report the correct > client volume setting to the plugin during "power on" so that you won't > experience the muting followed by the sudden volume increase. It also > sends all volume up/down commands in increments of +/-5%, which works > well for the plugin. Give it a try if you can, and let me know what you > think. > > I should have a new version of Plugin.pm for you to test in the next day > or two. Thanks again for your help. I will try al of that including Squeezer. I was actually using Squeezer before I mover to Squeeze CTRL (originally Squeeze Control but superseded) because there were aspects of Squeezer that didn't suit me, but it had been years LOL! Cheers, David *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
DavidBulluss wrote: > Loaded in, restarted, and... off for some testing. Then I will do the > log and sent it to you. > > Regards, David Log file attached. What I have noticed is that when first turned on and track played that there is no volume. Turning up volume brings it suddenly to life and volume is probably as it was when last played before being turned off. No waking of neighbors :-) The other thing of note is that when increasing/decreasing the volume using volume onscreen buttons (Squeeze CTRL) it jumps in 10% increments. Apart from that all good so far. 33852 Cheers, David +---+ |Filename: server.log(10).zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33852| +---+ *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Please generate a debug log of a power on followed by playing some > music, adjusting the volume, and a power off. Loaded in, restarted, and... off for some testing. Then I will do the log and sent it to you. Regards, David *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Hey David. I have a question. Now that you know to back up your plugin > files in a safe place when beta testing :), I wonder if you would be > interested in testing some changes I've been working on with regard to > secondary zone support. Before I move on to the next coding stage, > which will be adding support for quick select, I would like to make sure > that I am going in the right direction. Basically, I have cleaned up the > zone processing workflow so that it operates in a manner more in line > with that of the main zone in terms of handling commands and responses > from the AVR. The problem is that I don't currently have the ability to > test my changes. I know you indicated a willingness in the past to help > with testing the quick select function. Would you also be willing to > test the intermediate changes I have made? Other than making zone > processing theoretically more stable, there should be little if any > noticeable difference when running with these changes (at least once > they are tested and debugged). However, the resulting log files will be > a valuable tool going forward with adding quick select support. Let me > know if you have the time and inclination to help out with this effort. > Thanks. It would be a pleasure, bring it on! Very happy to test the beta. Cheers, David *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Oops! Not sure what happened there, David. Maybe the plugin was updated > during that time but, if that were the case, it should have overlaid the > new files too. I guess the safest thing to do is to copy the old files > somewhere else. If you ever need to go back to an older version, you can > download the zip files from Github: > https://github.com/aesculus/denonavpcontrol Yep, the next time I was replacing the files with the beta ones I saved them elsewhere as a backup :-) *Server*rpi3 pCP5.0.1 LMS7.9.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
