Re: [PEDA] Tasking tools
I just was talking to one of our engineers this morning regarding 8051 compilers and this tasking offer -- NO! Emanuel Rolf Molitor wrote: Did anybody yet received the tasking tools, offered for altium ats members some time ago ? Rolf Molitor Ing.Buero i2e Remscheid/Germany -- MPL AG www.mpl.ch Emanuel Zimmermann [EMAIL PROTECTED] Manager RD Phone: +41 (0)56 483 34 34 Taefernstrasse 20 Fax: +41 (0)56 493 30 20 CH-5405 Daettwil * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Tasking tools
[PEDA] Simulation Setup
Hi, I've used the Protel SPICE Simulator many times in the past, but not for a while. Just come to do an AC analysis of a filter and the Simulation Setup dialogue box ignores my instructions. I know I've had this problem before, just can't remember how to fix it. I seem to remember it writes a file containing the settings in the dialogue for passing to the simulator, just can't remember where. I do: Simulation-Setup-Check AC Analysis Close Dialogue, Open it again The setting is cleared. I recall this can happen if for some reason it can't write the file, just can't remember if this is the truth and if so what and where the file is - any clues? Jason. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Simulation Setup
The settings are stored in a [schematic_name].cfg file, which usually is located in the same folder as the schematic (when using the ddb-system). Rolf Molitor Ing.Buero i2e Remscheid/Germany -Ursprüngliche Nachricht- Von: Jason Morgan [EMAIL PROTECTED] An: Protel EDA Forum (E-mail) [EMAIL PROTECTED] Gesendet: Dienstag, 15. Januar 2002 12:46 Betreff: [PEDA] Simulation Setup Hi, I've used the Protel SPICE Simulator many times in the past, but not for a while. Just come to do an AC analysis of a filter and the Simulation Setup dialogue box ignores my instructions. I know I've had this problem before, just can't remember how to fix it. I seem to remember it writes a file containing the settings in the dialogue for passing to the simulator, just can't remember where. I do: Simulation-Setup-Check AC Analysis Close Dialogue, Open it again The setting is cleared. I recall this can happen if for some reason it can't write the file, just can't remember if this is the truth and if so what and where the file is - any clues? Jason. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] SMT resistor array footprints and usage?
As everybody else has indicated, you are best to create your own. I'll assume you are getting your parts (or at least have seen the parts) in a Digikey catalog. I've used the footprints for the Panasonic EXB-A and EXB-V8V footprints as they are called out in the catalog and they worked fine. As somebody else suggested, unless you are doing reflow soldering you may have some continuity problems with the cupped leads these packages offer. Great for reflow, bad for inspection or hand soldering. Bryn Matt Polak wrote: Hey all, Rather dumb question here, but I'm stumped. Can someone enlighten me as to where the footprints for surface-mount chip resistor arrays are, and how I would set them up against my schematic? I want to use something like an EZA or EXB series resistor array to help cut down on component count/size in a rather demanding layout, but I can't seem to find anything other than the standard discreet SMT footprints (1206, 0805, etc) that I've been using thus far. Any help would be greatly appreciated. I assume that I must be missing something stupid. -- Matt -- Name : Bryn Wolfe Title : Robotics Engineer Dept : Texas Robotics Automation Center (TRACLabs) Company: Metrica, Inc Addr : 1012 Hercules Drive Houston, TX 77058-2722 Voice : 281-461-7886 NASA : n/a FAX: 281-461-9550 Web: http://www.traclabs.com Email : mailto:[EMAIL PROTECTED] or mailto:[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Tasking tools
I got the same support suggestion for a PCBPrint.dll server failure. Application always hangs if I try to print in W2K on one machine. I also have it on my W2K laptop but don't get the problem. I went through the purge process, reinstalled and got the same problem. I am currently in the process of holding my left arm straight out in front of me, lifting my right leg 45 degrees to the side, tilting my head back and holding the mouse upside down. I have just about the same level of confidence that that will fix the problem. Bryn [EMAIL PROTECTED] wrote: In a message dated 1/15/2002 3:57:59 AM Eastern Standard Time, [EMAIL PROTECTED] writes: Did anybody yet received the tasking tools, offered for altium ats members some time ago ? Nothing here. As an aside, I asked for help with the problem of crashes during shutdown on W2K (also reported here), and the answer I got was to uninstall Protel, purge all traces from the system, and reinstall. Since it was a brand-new clean install, that advice seems less than helpful - although I'll give it a try as soon as I get a chance. But it seems that ATS is just the same old user support - none. Steve Hendrix -- Name : Bryn Wolfe Title : Robotics Engineer Dept : Texas Robotics Automation Center (TRACLabs) Company: Metrica, Inc Addr : 1012 Hercules Drive Houston, TX 77058-2722 Voice : 281-461-7886 NASA : n/a FAX: 281-461-9550 Web: http://www.traclabs.com Email : mailto:[EMAIL PROTECTED] or mailto:[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] SV: Tasking tools
This one usually helps: Uninstall P99SE and servicepacks. Reboot Remove all instances of '99SE' from the registry. Remove all directories on the harddrive that relates to P99SE Reboot Purge files *99SE*.* in the rootdirectory of your windows installation (c:\winnt or c:\windows) Now install P99SE and servicepacks again. Peder Hellegaard -Oprindelig meddelelse- Fra: Bryn Wolfe [mailto:[EMAIL PROTECTED]] Sendt: 15. januar 2002 13:30 Til: Protel EDA Forum Emne: Re: [PEDA] Tasking tools I got the same support suggestion for a PCBPrint.dll server failure. Application always hangs if I try to print in W2K on one machine. I also have it on my W2K laptop but don't get the problem. I went through the purge process, reinstalled and got the same problem. I am currently in the process of holding my left arm straight out in front of me, lifting my right leg 45 degrees to the side, tilting my head back and holding the mouse upside down. I have just about the same level of confidence that that will fix the problem. Bryn [EMAIL PROTECTED] wrote: In a message dated 1/15/2002 3:57:59 AM Eastern Standard Time, [EMAIL PROTECTED] writes: Did anybody yet received the tasking tools, offered for altium ats members some time ago ? Nothing here. As an aside, I asked for help with the problem of crashes during shutdown on W2K (also reported here), and the answer I got was to uninstall Protel, purge all traces from the system, and reinstall. Since it was a brand-new clean install, that advice seems less than helpful - although I'll give it a try as soon as I get a chance. But it seems that ATS is just the same old user support - none. Steve Hendrix -- Name : Bryn Wolfe Title : Robotics Engineer Dept : Texas Robotics Automation Center (TRACLabs) Company: Metrica, Inc Addr : 1012 Hercules Drive Houston, TX 77058-2722 Voice : 281-461-7886 NASA : n/a FAX: 281-461-9550 Web: http://www.traclabs.com Email : mailto:[EMAIL PROTECTED] or mailto:[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Printer Issues (Ex: Tasking tools)
Yeah, it's an HP printer, but that's all we've got in the lab. Both are network printers (direct to ethernet). What I don't get is why it works on one machine and not the other. ATS suggested that I make sure I've got the latest drivers. I'm checking on that now. If I get this to work, I'll post a message to the forum indicating what works. Ian Wilson wrote: It seems almost all the printing problems are related to HP drivers both PCL and Postscript - at least there is a lot of stuff on the Protel KB about problems with printing and even loading schematic with HP printer drivers. Check out the last 2 months of KB articles for a summary. I came across this tonight on theor www site - and it has been fairly regularly mentioned in the past on the forum. Question is is it HP's problem or Protel's? (I know... our's... but in an ideal world which company would be busy beavering away fixing it...) Bryn , have you got any HP printer drivers installed? Ian Wilson On 06:30 AM 15/01/2002 -0600, Bryn Wolfe said: I got the same support suggestion for a PCBPrint.dll server failure. Application always hangs if I try to print in W2K on one machine. I also have it on my W2K laptop but don't get the problem. I went through the purge process, reinstalled and got the same problem. I am currently in the process of holding my left arm straight out in front of me, lifting my right leg 45 degrees to the side, tilting my head back and holding the mouse upside down. I have just about the same level of confidence that that will fix the problem. Bryn [EMAIL PROTECTED] wrote: In a message dated 1/15/2002 3:57:59 AM Eastern Standard Time, [EMAIL PROTECTED] writes: Did anybody yet received the tasking tools, offered for altium ats members some time ago ? Nothing here. As an aside, I asked for help with the problem of crashes during shutdown on W2K (also reported here), and the answer I got was to uninstall Protel, purge all traces from the system, and reinstall. Since it was a brand-new clean install, that advice seems less than helpful - although I'll give it a try as soon as I get a chance. But it seems that ATS is just the same old user support - none. Steve Hendrix -- Name : Bryn Wolfe Title : Robotics Engineer Dept : Texas Robotics Automation Center (TRACLabs) Company: Metrica, Inc Addr : 1012 Hercules Drive Houston, TX 77058-2722 Voice : 281-461-7886 NASA : n/a FAX: 281-461-9550 Web: http://www.traclabs.com Email : mailto:[EMAIL PROTECTED] or mailto:[EMAIL PROTECTED] -- Name : Bryn Wolfe Title : Robotics Engineer Dept : Texas Robotics Automation Center (TRACLabs) Company: Metrica, Inc Addr : 1012 Hercules Drive Houston, TX 77058-2722 Voice : 281-461-7886 NASA : n/a FAX: 281-461-9550 Web: http://www.traclabs.com Email : mailto:[EMAIL PROTECTED] or mailto:[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Printer Issues (Ex: Tasking tools)
Hello, all: Printer FYI: I bought a Brother HL-1650 laser printer about a month ago. So far it's been really good. It duplexes (prints on both sides of the paper) and has a bypass tray for envelopes, labels, etc. W2K operation is flawless so far, even with Protel. The printer is networked on a Win95 print server (sorry, I'm not yet brave/smart enough to put printers on the Linux server). I had some initial difficulty with the Win9X drivers on client machines, but this was just because the driver install was done over the network. There was also a more recent driver on the Brother website, which I downloaded. When I deleted the drivers from the clients and loaded the drivers directly from each client instead of over the network, they worked fine. I would recommend this printer to anyone who wants a duplexing laser printer and doesn't want to pay HP's high price ($800). The Brother printer was $500, and I got it on sale for $400. I like the duplexing feature because this printer is also used to print manuals and datasheets. Yes, I print PDF datasheets! I think electronic documents are great, but I still like paper versions too. The paperless office - what a concept! Best regards, Ivan Baggett Bagotronix Inc. website: www.bagotronix.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Multisheet Problems Updates etc.
On Sun, 13 Jan 2002, Abd ul-Rahman Lomax wrote: Perhaps update Schematic from PCB should generate a list of macros just like update in the other direction does. This would be consistent. Then one could choose whether or not to preview changes, or one could edit the change list if desired. That would be extremely handy and consistent - it feels very 'right'. would the keeper of the wishlist. Similarly, if update schematics and update PCB from library could have the same this is what's about to happen to your precious design macro box, that's be somewhere between reassuring and a life-saver... Steve * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Tasking tools
When did you get them ? Rolf Molitor Ing.Buero i2e Remscheid/Germany -Ursprüngliche Nachricht- Von: Ben Uijtenhaak [EMAIL PROTECTED] An: Protel EDA Forum [EMAIL PROTECTED] Gesendet: Dienstag, 15. Januar 2002 11:02 Betreff: Re: [PEDA] Tasking tools Yes! Ben Uijtenhaak [EMAIL PROTECTED] Gatsometer BV P.O. Box 4959 2003EZ Haarlem The Netherlands phone : +31 23 5255050 fax : +31 23 5276961 -Original Message- From: Rolf Molitor [EMAIL PROTECTED] To: Protel EDA Forum [EMAIL PROTECTED] Date: dinsdag 15 januari 2002 09:56 Subject: [PEDA] Tasking tools Did anybody yet received the tasking tools, offered for altium ats members some time ago ? Rolf Molitor Ing.Buero i2e Remscheid/Germany * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] License for sale
Hey all I want to sell my license, full Protel 99SE, 5100$ US Best regards Soren Andersen [EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] License for sale
At 10:28 PM 1/15/2002 +0100, Soren Juel Andersen wrote: Hey all I want to sell my license, full Protel 99SE, 5100$ US I suggest listing this on [EMAIL PROTECTED] You can join that list by mail to [EMAIL PROTECTED] and then respond to the verification mail. The list readership is higher than the subscription list shows because it is web-searchable and accessible That's a good price. [EMAIL PROTECTED] Abdulrahman Lomax Easthampton, Massachusetts USA * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Printer Issues (Ex: Tasking tools)
1 note about Postscript printing. I've tried all the different postscript drivers. The best to work with Protel was 'NEC Silentwriter2 90 v52.2'. To prevent Protel from printing additional blank pages, turn off the 'Send CTRL-D after each job'. This postscript driver should drive most Postscript 2 3 laser printers. Brian Guralnick - Original Message - From: Bagotronix Tech Support [EMAIL PROTECTED] To: Protel EDA Forum [EMAIL PROTECTED] Sent: Tuesday, January 15, 2002 11:57 AM Subject: Re: [PEDA] Printer Issues (Ex: Tasking tools) | Hello, all: | | Printer FYI: I bought a Brother HL-1650 laser printer about a month ago. | So far it's been really good. It duplexes (prints on both sides of the | paper) and has a bypass tray for envelopes, labels, etc. W2K operation is | flawless so far, even with Protel. The printer is networked on a Win95 | print server (sorry, I'm not yet brave/smart enough to put printers on the | Linux server). I had some initial difficulty with the Win9X drivers on | client machines, but this was just because the driver install was done over | the network. There was also a more recent driver on the Brother website, | which I downloaded. When I deleted the drivers from the clients and loaded | the drivers directly from each client instead of over the network, they | worked fine. I would recommend this printer to anyone who wants a duplexing | laser printer and doesn't want to pay HP's high price ($800). The Brother | printer was $500, and I got it on sale for $400. | | I like the duplexing feature because this printer is also used to print | manuals and datasheets. Yes, I print PDF datasheets! I think electronic | documents are great, but I still like paper versions too. The paperless | office - what a concept! | | Best regards, | Ivan Baggett | Bagotronix Inc. | website: www.bagotronix.com | | * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Looking for a resistor supplier.
prob. need a slider type ohmite, they break real easy though and their mounting clips suck newark should have them, they only charge about 25% more than list price great recommendation, eh?, but seriously at that exact value i think it will be tough dale does those ones with a gold color heat sink type body and nice mounting ears, you can prob. get a 1.5 and a 3.0 ohms that kind are real nice if you don't overpower them (a lot) at which point the ceramic ends can blow out with astounding force Dennis Saputelli Brian Guralnick wrote: I need a 4.5 Ohm, 50 Watt resistor. For precision audio, any recommendations? Brian Guralnick -- ___ www.integratedcontrolsinc.comIntegrated Controls, Inc. tel: 415-647-04802851 21st Street fax: 415-647-3003San Francisco, CA 94110 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Looking for a resistor supplier.
Don't know if this will do it but Hosfelt Electronics has a 10 ohm/175 watt resistor with an adjustable slider. My guess is that with the slider at the 4.5 ohm point, it would still provide an adequate rating. www.hosfelt.com part number 81-103 $6.95 on page 93 of catalog 2001-B - Original Message - From: Brian Guralnick [EMAIL PROTECTED] To: Protel EDA Forum [EMAIL PROTECTED] Sent: Tuesday, January 15, 2002 6:52 PM Subject: [PEDA] Looking for a resistor supplier. I need a 4.5 Ohm, 50 Watt resistor. For precision audio, any recommendations? Brian Guralnick * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] SMT resistor array footprints and usage?
Hey, you guys rock! : Thanks so much to all of you for the helpful feedback concerning the resistor question I posted the other evening. Doing a handful of designs layouts in Protel thus far has been a big learning experience, I can defiantly say I agree with creating the custom footprints/landpatterns that multiple folks mentioned. After getting a DB25 connector footprint back on a prototype featuring 30 mil holes for the mechanical locking clips (ouch!) rather than something more like 90's, I have been extremely careful with double-checking all footprints I lay down. It's good to know that most folks simply prefer to create most footprints from scratch rather than hunting them down. Glad to also hear that I wasn't just missing something or doing something wrong - you usually tend to assume it's a problem with the user when commercial software doesn't act as it's supposed/intended to. : Also, thanks for all of the varied responses, suggestions, and comments concerning the resistor arrays, suggestions for footprint layout, laser-printer 1:1 prints for double-checking, manufacturing suggestions, and all of the other amazingly helpful material. I really wish I'd found this list sooner! Very best regards, -- Matt * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Looking for a resistor supplier.
Take a look at: http://www.mouser.com/products/detail.cfm?MPart=71-RH50-4.7CustRef=source=search http://www.mouser.com/products/detail.cfm?MPart=588-D50K-5.0CustRef=source=search http://www.digikey.com/scripts/us/dksus.dll?Filter John Williams Brian Guralnick wrote: I need a 4.5 Ohm, 50 Watt resistor. For precision audio, any recommendations? Brian Guralnick * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Looking for a resistor supplier.
What about Huntington Electric? The big-ass gold ones on page 591 of Digikey? The have 50 watters in all the standard values. 1.5 and 3 as someone suggested. They are $5 each. Tony -Original Message- From: Brian Guralnick [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 15, 2002 3:52 PM To: Protel EDA Forum Subject: [PEDA] Looking for a resistor supplier. I need a 4.5 Ohm, 50 Watt resistor. For precision audio, any recommendations? Brian Guralnick * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *