[RBW] Re: How do you track your mileage?

Garmin Edge 820. Goes from bike to bike easy and I don't have to change any settings. The downside is, it's expensive and has way more features than I will ever use. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from

[RBW] Re: Max Tire Size on 650b Hillborne?

Sam Hillborne owner here, 42 mm tires with fenders but it is very tight. With the fenders off, 42 is still the largest I would go. Caliper brake model. 52cm. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group

[RBW] Re: Things I wish Rivendell still sold..

The Betty Foy. I have a had a few women who have asked where they can buy that exact bike and I inform them they can't. I have had people ask if they can buy my wife's bike because they like it so much. Yes you can buy a close approximate with a custom but that is cost prohibitive. Bring back

[RBW] Re: What do Rivendell Riders use for floor pumps?

I have two Joe Blows, that work well and are in your price range. These are my two go to pumps. I also have two Silca Pistas that are both over 30 years old and still going strong but they are not better than the JB's. I keep them for nostalgic reasons. Plus, I think they fit the Rivendell

[RBW] Re: Ahearne+Map Comfort... Also, WTB

I currently have those bars on my Sam, and while I don't do 50 mile rides, I do 50 km rides (31.07 miles), if that helps at all. I went from Albatross to these bars and added the Ergon grips for comfort. I lowered my bars for that sportier position so that there is a little more weight on my

[RBW] Re: Front vs. rear loads for AHH

Five pages on using or not using a front rack with baskets. https://groups.google.com/forum/?hl=en#!topic/rbw-owners-bunch/m3Y3EdRhxv4%5B1-25%5D On my Riv I started with a porteur rack and basket. Seemed like overkill, so I switched out to a Mark's rack and basket. Then I switched out to the

[RBW] Re: Please tell me about your experience with caliper braked Hillbornes.

I have a Sam with the Tektro brakes and they are not great brakes but adequate and only after a pad change. They look good, nice sculpted lines and the finish of the brake is well done. Super easy to set up which is a bonus. The price is more than affordable so they have that going for them.

[RBW] Re: In Japan! Any recommendations?

I's Bicycle in Kyoto, home to Grand Bois Cycles. It is short walk to Ninnaji Temple which is also a must see. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email

[RBW] Re: FS

Mavic 319 = 622 On Wednesday, June 13, 2018 at 1:00:41 AM UTC-4, Neil Doran wrote: > > Wot size, looks like 559? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an

[RBW] PSA: A. Homer Hilsen 61 cm

https://www.ebay.com/itm/113006271134?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 Saw this and thought some of you tall guys might be interested. I contacted the owner and he says he lives in the DC area. -- You received this message because you are subscribed to the Google Groups

[RBW] Re: Is this an insane idea?

I didn't go through all the replies so forgive me if this has been posted. https://www.fyxation.com/products/six-fyx-conversion-kit This to me is the most elegant solution to your problem. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.

[RBW] Re: U locks and Pitlocks

Inside my condo bike locker which is locked with a padlock and Kryptonite Evolution mini. There are two Rivendells and they both get; - 2 Kryptonite New York Fahgettaboudit Mini - 1 Kryptonite Evolution Mini - 1 Krypto Cable - Pitlocks for both wheels and seat post. - Bicycle

[RBW] Re: How I came to own, and enjoy, a Clem Smith Jr

Congratulations on your new to you bike. Also thanks for the write up. I like reading stories like you have written. As for getting on your bike, it is sometimes easier to angle the bike towards yourself so that it lowers the height that you have to swing your leg over. > -- You received

[RBW] Re: Clicking noise -- About to lose my mind.

I had a click once that took me a while to figure out. The sound only happened on big hill climbs. Two loose spokes where they touched was creating the sound. Some people put a drop of oil between the spokes to minimize any noise. I just had the wheel trued and it did the trick. -- You

[RBW] Re: New cockpit change: Albatross to MAP/Ahearne

Ron, that was my thought also. With the super long top tube, I thought it might be overkill so I have a 100 mm stem just in case. The thing is the MAP/Ahearne bars come back a lot farther than I thought. Today will be my first real ride with them. On Monday, May 7, 2018 at 8:13:07 AM UTC-4,

[RBW] New cockpit change: Albatross to MAP/Ahearne

Since I am not commuting at the moment I decided for a sportier feel to my Sam. The Albatross bars are gone along with the basket and I have replaced them with MAP/Ahearne bars. Kept the 120 stem but lowered it to about saddle height. I only rode it around my parking garage and it felt ok,

[RBW] Re: What do Rivendell Riders use for aerobic base training heart rate monitors?

On Wednesday, May 2, 2018 at 11:59:22 PM UTC-4, Lum Gim Fong wrote: > > What do Rivendell Riders use for aerobic base training heart rate > monitors? I just started using a Garmin 820 with speed sensors and heart rate monitor. I don't care about cadence so I left that out. So far I have only

[RBW] Re: Rounded Tektro R559 allen nut - how long is it (for ordering a replacement)?

I don't know the length but what I have done was gone to LBS and bought a few sizes just to keep on hand. You never know if you need longer for adding fenders or center point rear rack etc. They were really inexpensive, somewhere around a dollar or so. -- You received this message because

[RBW] Re: Are you using your real name on here?

Sorry I should have added I am more worried about Google searches than this group. I don't want my real name popping up unless it is related to my work. Obviously I have posted my photo but it is small enough that I think it would be hard to tell if it is really me. -- You received this

[RBW] Re: Are you using your real name on here?

I don't use my real name because I worked in forensic psychiatry with sex offenders, most of them are harmless but some aren't and I don't want them knowing my life. With a bit of detective work you can figure out who I am but I don't think they will go to that much trouble. It is just a small

[RBW] Re: Care to share experiences converting to SS using White Industries ENO Eccentric?

I had one for years with nary of a problem. It worked as advertised and nothing more. If I wanted single speed and the frame had vertical dropouts I would use it again. I also have used the Surly Singlulator and while it works, the aesthetics of the bike were not to my liking. -- You

[RBW] Re: Riv Suggested Max Rider Weight per Model; Separate question about Sam sizing

I can't answer most of your questions but I did purchase a 52 cm Sam before the size change. If I recall correctly it was 52, then 56. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving

[RBW] Re: Casual Observations on Japanese Metropolitan Area Bike Transportation

I go to Japan for fun at least 2-3 a year and I love the cycling culture there. My wife is Japanese so she still keeps her mama chari in Osaka. I use her sisters bike when I need one. My wife tells me when she went to University, she had two bikes. One to get to the train station and another

[RBW] Re: Sam Hillborne vs A. Homer Hilsen

Paul, I can only talk about my Sam and I have not been disappointed in the ride of the bike at all. Mine has Albatross bars and I like the setup for most of the riding I do. It feels solid when I ride it which instills a sense of confidence. The only downside to this bike is the sloping top

[RBW] Re: How do you guys do it, buying a bike sight unseen

I bought a Betty Foy for my wife because I liked the look. I was already riding Rivendell "inspired" bikes at the time and was content. After I built hers up, I decided that I would like to try one so I bought a Sam Hilborne. I made my decision by reading everything on the Riv website and

[RBW] Re: Advice for selling a Saluki/Hilsen?

Absolutely one of the nicer bikes I have seen. The colour is perfect. I liked your photos and would only change a few things before the sale. First put the bars back in the upright position, and don't tape them all the way, use the cork grips again. The brake levers have to go, they look like a

[RBW] Re: Cable/Housing Cutter Suggestions

For cables I use Hozan or Park, they both work well. For housing I use a Dremel with a cut off wheel. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Finally, I have Riv

Congratulations on your new to you bike. Sounds like you are already enjoying it. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Anybody recognize this handlebar?

Thanks Chris. I didn't make that clear in my original post so I am glad you clarified this. This is the reason I haven't used them on my Riv is because of the size. That is why I purchased the Map/Ahearne for the quill stem that I own. On Saturday, July 15, 2017 at 10:35:14 AM UTC-4, Chris

[RBW] Re: Anybody recognize this handlebar?

[RBW] Re: Anybody recognize this handlebar?

I have three pair of Metropolis bars because they are my ultimate bar. After paring down my bikes to one Brompton and one Rivendell, the FSA's are sitting in a parts bin. I figure some day I will use them again. I did purchase the Map/Ahearne bars for the Riv because they resemble the

[RBW] Re: Anybody recognize this handlebar?

I think it is a Origin 8 Classique Tour. http://www.origin8.bike/product-description/?prod_model_uid=6871 -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Bike computer

I use a Cat Eye Enduro 8. It is nothing fancy but it does what I want it to do which is time and occasionally distance. There are functions I don't use so I wish it was even simpler. Since I have to remove it so it doesn't get stolen, I sometimes forget to put it back on which is a shame

[RBW] Re: Dyno wiring

Having problems with providing an image in the message. I used a Sheldon Nut from Problem Solvers to mount the light. I got the idea from a BLUG posting about this. For now I just

[RBW] Re: Dyno wiring

[IMG]http://i283.photobucket.com/albums/kk319/blakcloud60/Rivendell%20Sam%20Hilborne/P1020754_zpsbgvpwses.jpg[/IMG]

[RBW] Re: Dyno wiring

[URL=http://s283.photobucket.com/user/blakcloud60/media/Rivendell%20Sam%20Hilborne/P1020754_zpsbgvpwses.jpg.html][IMG]http://i283.photobucket.com/albums/kk319/blakcloud60/Rivendell%20Sam%20Hilborne/P1020754_zpsbgvpwses.jpg[/IMG][/URL] This idea was copied from a BLUG article that suggested using

[RBW] Re: Compass tires for Sam

Not Compass but Grand Bois, I use Hetres. I had to remove my fenders as they were to close for comfort. If you are using fenders you might want to add that info as it might change the recommendations. -- You received this message because you are subscribed to the Google Groups "RBW Owners

[RBW] Re: A Homer Hilsen slight color change?

That bike also looks good with the brazed on posts for Paul brakes. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [RBW] Re: New bike day: unpacking

Wally, that was very funny! I had a good chuckle. Jim, congrats on the new bike in your stable. Thomas On Friday, March 17, 2017 at 3:24:07 PM UTC-4, Wally Estrella wrote: > > You are most welcome! > > NICE! Congrats! I can relish that new bike. Now can you ketchup? ;) > > I like big bikes!

Re: [RBW] Re: New bike day: unpacking

Now that was funny. Good way to start my morning, laughing. Thanks for that Wally. On Friday, March 17, 2017 at 3:24:07 PM UTC-4, Wally Estrella wrote: > > You are most welcome! > > NICE! Congrats! I can relish that new bike. Now can you ketchup? ;) > > I like big bikes! I push a 64 Atlantis

[RBW] Re: Is it possible to 'lengthen' cable housing?

I have done this same thing when I was experimenting with different bars. I added a second piece of housing and butted two ferrules together to get the length I needed. It worked like a charm and even indexed with no problems. When I had it dialed in I replaced them but I had used it for months

[RBW] Re: Sam Hillborn

When I am on my Sam, I truly love this bike. It does everything I want a bike to do. I consider this my do everything bike from commuting to fun rides, With Hetres, the ride is sublime. With the Marathons, the ride feels solid. It's when I am off the bike and I have to look at it, that I have

[RBW] Re: Where are the Brompton Owners or A Case of the Novembers

One more Patrick. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an

Re: [RBW] Re: Where are the Brompton Owners or A Case of the Novembers

Sorry about that Patrick. The link wouldn't work so I deleted the message and reposted with the link removed. I did change out my bars and they are now almost as high as the M bar Brompton, within

[RBW] Re: Where are the Brompton Owners or A Case of the Novembers

I missed this thread the first time around. I too am a Brompton owner but the bike never really caught on with me. I just found the bike uncomfortable and not fun to ride. Plus when you have a Riv, ask yourself what bike would you rather ride? So the pair, (his and hers) sat in a closet and we

[RBW] Re: Where are the Brompton Owners or A Case of the Novembers

I missed this thread the first time around. I too am a Brompton owner but the bike never really caught on with me. I just found the bike uncomfortable and not fun to ride. Plus when you have a Riv, ask yourself what bike would you rather ride? So the pair, (his and hers) sat in a closet and we

[RBW] Re: Best way to remove lawyer lips

I just did my Sam and my wife's Betty two weeks ago. I rarely take off the front wheels and when I do it is a bigger pain with Pit Lock skewers. They really get hung up on the lips because of the design. I used a Dremel and was somewhat careful and now taking off the wheel is much easier. --

[RBW] Re: How to sell a Rivendell Bike

Cecily, I have a friend in Vancouver ask to buy my wife's Betty Foy but it's not for sale. By chance what is the size of your frame? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails

[RBW] What size A. Homer Hilsen should I get, 54 or 56?

Yes, I have contacted Riv on this but I am leery of their suggestion as it puts me on a bike that is smaller than I have ridden and this information contradicts their own charts on the website. 81 cm PBH 71 cm Saddle height The chart on this page

Re: [RBW] Bob Brown Cycles Road Frame (as referenced in Cheviot thread)

On Wednesday, August 10, 2016 at 7:09:45 AM UTC-4, Steve Palincsar wrote: > > Come on, folks - this was about *fenders*. Drive side, non-drive side - > cranks are nothing but a distraction in this case. > > > Really I think fenders are the real distraction here because no one mentioned them

Re: [RBW] Bob Brown Cycles Road Frame (as referenced in Cheviot thread)

SeanMac, beautiful bike. Richard Sachs sometimes post on VS and his own website when a customer has a bike to sell, maybe Bob Brown has the something similar. His wait time for a bike is 12-18 months according to the website so maybe he knows someone who wants something close to what you have

[RBW] Re: Albatross bars ???

I started with a 10 cm stem and this didn't work at all with Albatross bars. I then went 120 and could have easily gone to a 130 and still been good. As JB has mentioned you will be surprised on how far back the bars will go. -- You received this message because you are subscribed to the

[RBW] Re: Hubbuhubbuh tandem Pre-order is live

I am thinking of it and I have another 30 hours to decide but what is holding me back is the added cost for living in Canada. With the exchange rate, shipping and sales tax, I get dinged for about $2600 for the basic frame. I have ridden tandems with my wife and we really enjoyed the

[RBW] Re: what bolts?

A little late but be cautious of ordering from Atomic 22. Read this thread on another forum before you do. On Friday, February 12, 2016 at 1:08:31 PM UTC-5, Nathan Spratt wrote: > > I

[RBW] Re: Pass & Stow Porteur Rack Experiences.

Pass and Stow were at NAHBS and while I was there the infamous Gary Helfrich came by and bought a rack. That to me is a ringing endorsement to the quality and build of Pass and Stow. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To

[RBW] Re: Pass & Stow Porteur Rack Experiences.

Pass and Stow were at NAHBS and while I was there the infamous Gary Helrich came by and bought a rack. That to me is a ringing endorsement to the quality and build of Pass and Stow. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To

[RBW] Re: derailleur hanger

I wouldn't hesitate to bend that back as long as you use the right tool. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: SOLD Re: FS: Low Trail Hunqapillar Frame/Fork/SP/HS size 58 - $1,300 OBO + shipping

Congratulations. It's always fun to get a new bike. Happy riding. On Friday, February 12, 2016 at 12:41:47 PM UTC-5, Brian Campbell wrote: > > Bought! :-) > >> >>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this

[RBW] Re: NAHBS in Sacramento Feb. 26 - 28

Thanks Jim, this is perfect. Thanks to everyone who has given me advice. Just hope the show is good this year. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an

[RBW] Re: NAHBS in Sacramento Feb. 26 - 28

Well I think I lied above, I have decided that I am going to NAHBS after all but I need a little help with logistics. I will be flying to San Fransisco on the Friday and making my way to Sacramento and I was thinking the cheapest way would be to take the train system from the airport. Can

[RBW] Re: NAHBS in Sacramento Feb. 26 - 28

I went in 2009, 2010, 2013 and 2014 and there has been a shift in the show every time I go and this shift is not something I like. It started with a show for hand built bikes but now has become a lot more corporate. You see less frame builders and more corporations, like Shimano, Campagnolo,

[RBW] Re: Copenhagen!

I have been to Copenhagen in the summer and it was spectacular. It had a profound impact on my views of cycling. For one thing once I got back I stopped using cycling specific clothing. As John says, if a woman in a fur coat can ride a bike, why do I have to wear lycra tights and a Shower Pass

[RBW] Re: A Soma San Marcos (Amos) Build

That is a really nice bike. Enjoy! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group,

[RBW] Re: WTT 52 Bombadil frame for a smaller size

For us who just love to see the photos, the link doesn't seem to be working. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: My First Date With Clementine

Very nice. I to like the small touches that adorn your bike. Things like the different coloured nipples are just one example. Happy riding. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop

[RBW] Re: 56CM Sam Hillborne - Double Top Tube

There are other choices besides the Albas and Albastaches. You could have a look at the MAP/Ahearne bar or the Jitensha Studio bar. These would give you a sportier position instead of the what I call the gentleman position that Albatross bars give you. -- You received this message because

Re: [RBW] Re: The Mysterious Homer

If I had to do it all again I would have bought the bike that I had my heart set on and that was the AHH. I purchased the Sam because I got a deal on it, demo model and it was the last 52 cm before they switched over to the new sizes. As much as I like the Sam, the sloping top tube is

[RBW] Re: Hillborne seatpost size

27.2 -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to

[RBW] Re: Big in Hong Kong...

Please than your wife for the translation and for your time and effort to post it. Puts on whole new spin on that video when you know what is being said. On Wednesday, October 21, 2015 at 11:35:50 PM UTC-4, Lungimsam wrote: > > OK, my native Cantonese wife who is native to HK and Canton,

[RBW] Re: Estimating My Wife's PBH

Well if it is a Sam then it really makes it easy. Since there essentially only four sizes, you would want the 51 cm. The 55 would be just too large with the 570 mm long top tube. Nice gift by the way. -- You received this message because you are subscribed to the Google Groups "RBW Owners

[RBW] Re: Can a Blue Sam stand up to these kinds of dirt trails?

I did it once on my Sam on trails like you described and my take away conclusion was never again. I wasn't worried about the frame breaking or the wheels not being able to handle it, because they can. I think the combination of the low bottom bracket and the Albatross bars made the bike

[RBW] Re: Babyshoe Pass EL's Tubeless on Pacenti SL23's

Thanks for the write up! Your instructions are great. I will be interested to know if you end up with less flats in the long term test. If it works then I might give it a try. -- You received this message because you are subscribed to the Google Groups RBW Owners Bunch group. To unsubscribe

[RBW] Re: Car Racks Rivs

Toyota does not recommend hitch racks on my car so that leaves a roof rack for me. When I looked at buying a roof rack to accommodate a Betty Foy and Sam Hillborne with Fenders and Wald baskets the price was a real sticker shock for me. At well over a thousand dollars (Canadian), I decided to

[RBW] Re: Local Rivendell Dealer suggestions for DELMARVA area?

As Beth already posted a short while back. http://bikelovejones1.blogspot.ca/2015/05/theres-new-kid-in-town-rivelo.html So if it can be done in Oregon, then it can be done anywhere. -- You received this message because you are subscribed to the Google Groups RBW Owners Bunch group. To

Re: [RBW] Saluki - Dog Trailers?

I have used trailers for the last twenty years in some form or another. My current rig is my Sam pulling a Burley Travoy. This trailer is light and even when loaded isn't a problem. I love trailers and if I had a dog I would do the same thing as you. Have fun. -- You received this message

[RBW] Re: Saluki on it's way back

I am glad to hear you survived the accident. I had something similar with a fully loaded porteur rack with Wald basket break at the springboard. I was lucky and stayed upright as my bike was like a plow. Then I saw a trick on the Riv site of putting a toe strap around the rack and the head

[RBW] Re: RBW Osaka Roadie clip bell loud enough?

I haven't used that bell but I know I wouldn't buy it. I dislike bells that use the striker on a spring. Every time you hit a bump the bell rings because of that spring. If you want a small bell, try this one from Spurcycle

[RBW] Re: What do Rivendell Riders use for wheel security?

I use Pitlock on both wheels and seat post on my Sam and my wife's Betty. They are both keyed the same for convenience. I pair this up with a Kryptonite Fahgettaboudit mini to lock the frame. On rare occasions I might just use a Kryptonite mini, because it is a least half the weight of the

[RBW] Kyoto, Grand Bois and Hetres

Today I went to Kyoto, Japan and visited Grand Bois Cycles and bought some new Hetres for my Sam and picked up spare for my wife's Betty Foy. They were on sale, so I was able to get three tires for less than $100 American! I am going to put these on my spare set of wheels that I have. Marathons

[RBW] Re: Go fast-ish tires on the Hillborne

I had that same kind of moment when I first tried Hetres on my Sam. They transformed the bike that made me change my mind that tires didn't make huge differences. After a hundred kilometers if I was lucky got a slash that cut right across the casing of the tire and the tire was useless. That

[RBW] Re: Repair help needed - Stuck stem expander wedge

Like those pesky stuck seat posts, use ammonia in the head tube to loosen the corrosion. Let is soak for the night and then use your bag of tricks to get it out. If all else fails, I like the drill suggestion the best. Good luck and though it seems frustrating now on this little project, it

[RBW] Re: Clem Smith Photos

From the raw bare frames on the Rivendell website, I never thought that bike had a chance of looking good. Your gf's bike proved me wrong, it look fantastic. The 26 wheels look so proportional to that bike. I am glad she likes it. Happy riding to you both and thanks for posting the photos.

[RBW] Re: WTB

Congratulations Kellie! I am sure you will be very happy with your new bike acquisition. On Sunday, February 15, 2015 at 2:32:15 PM UTC-5, Kellie wrote: So happy to say I found a Saluki, perfect size. Thank you Fullylugged! -- You received this message because you are subscribed to the

Re: [RBW] 56cm 650B Toyo Homer for sale on RBW site...

I did get a call from Jerrod (sp?) saying I did not get the frame. They made a mistake and they said sorry. This is the fifth hiccup that I have experienced from RBW and I really ask myself, how much slack to you have to throw RBW before you just give up? Christopher congratulations on your

[RBW] Re: 56cm 650B Toyo Homer for sale on RBW site...

I thought I just bought it as I just placed the order. Then came to this site to let people know, now I find out after reading this thread it may be already gone. Oh well. . . -- You received this message because you are subscribed to the Google Groups RBW Owners Bunch group. To unsubscribe

[RBW] Re: Bar Ends vs Paul Thumbies? Anyone tried both?

Both my wife and I have Albatross bars and we both started with bar ends. That experiment didn't last long and I switched out both bikes to Dura Ace and Paul Thumbies. Mine has the cork Ergons and hers, some cheap grips that I keep meaning to switch. We are both happy with the Thumbies. I find

[RBW] Re: Towards a new category: high performance upright

Jeremy, this was a timely thread for me. I was thinking this week, outside of this group, there really isn't a place for me to read about bicycles that I like, which are the bikes you are describing. I am looking forward to the Flickr Group and more photos to peruse over. Dropped bar bikes

[RBW] Re: Sams versatility

I agree with the others, the Sam H. will be fine for your needs. The beauty is, if you find you outgrow it and you need something different you can always sell the bike and start again. Riv's have great resale value. -- You received this message because you are subscribed to the Google Groups

[RBW] Re: Wire Routing For Rack-Mounted Tail Light

In Anton's reply he has a link to what he uses. It is Goop Household Adhesive. -- You received this message because you are subscribed to the Google Groups RBW Owners Bunch group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: ISO Bay Area frame builder

Though this won't answer your question directly but in three months the North American Handmade Bicycle Show is being held in Louisville, Kentucky. Yes it is a far way from your state but you can meet more builders, in one day than you can in a month in California. I go every year just to

[RBW] Re: Daring to wrench on my Riv's?

Purchase the right tools and buy yourself a workstand, if you don't already have one. My workstand was the best investment I ever made. Buy the tools over time as you need them, it lightens the load on your finances. My workstand and assorted Campy tools are 30 years old and are still going

[RBW] Re: Always tantalizing to look for frame specials

Three different browsers, all deleted caches and the frames still exist for me. On Tuesday, December 2, 2014 8:41:36 PM UTC-5, Jim M. wrote: Refresh your browser or empty your cache, Patrick. The frames are gone, gone, gone. -- You received this message because you are subscribed to

Re: [RBW] Re: Always tantalizing to look for frame specials

Simple One $805.00 On Tuesday, December 2, 2014 9:00:56 PM UTC-5, cyclot...@gmail.com wrote: They're gone. What was the SO going for? -- You received this message because you are subscribed to the Google Groups RBW Owners Bunch group. To unsubscribe from this group and stop receiving

[RBW] Re: Always tantalizing to look for frame specials

I looked long and hard at the Bombadil as it is my size but I decided I really want a A. Homer Hilsen. It was tempting though. -- You received this message because you are subscribed to the Google Groups RBW Owners Bunch group. To unsubscribe from this group and stop receiving emails from

[RBW] Re: Bombadil final build--for now.

Looks really good Trevor. Enjoy! -- You received this message because you are subscribed to the Google Groups RBW Owners Bunch group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send

[RBW] Re: OT (grant-related, not Riv-related): lo-carb, high fat protein, ketosis, c.

I need to lose weight quickly as a requirement for a hernia operation. The hospital suggested a low carb diet, which I tried. One month later I had lost twenty pounds from 191 to 171. The diet was hard for me as I drink at least one coke a day with a chocolate bar, I love pasta, and all kinds

[RBW] Re: Wheel Stabilizer or no?

My first foray into a stabilizer was the Velo Orange one. It worked reasonably well but you still had to be somewhat careful with heavier loads. What I didn't like was the clamp around the tube, it makes the bike look ugly. When I had my bikes repainted I had them braze on small clip for the

[RBW] Re: New to Me Rivendell Road (Standard)

Great looking bike, congratulations. If it were my bike I would go with the biggest tires that would fit without fenders. I am more into comfy tires than I am about getting wet or dirty. Then I read Tim Gavin's Road being converted to 650 and liked that idea even better. Have fun with it.

[RBW] Re: Clem on the Blug

So far, it is interesting. The colour is great, the flat fork crown, kickstand plate, the 1 x 8 speed are all things I like. I also like no bottle bosses, I think they ruin the aesthetic of the bike. I know I am a minority in this regard. Surprised about the cantilever brakes and they curved

[RBW] Re: Clem on the Blug

of a commuter/errand/fun bike. The 1 x 8 and long chain stays point me in the direction. On Friday, October 10, 2014 6:06:20 PM UTC-4, Brewster Fong wrote: On Friday, October 10, 2014 9:26:24 AM UTC-7, blakcloud wrote: I also like no bottle bosses, I think they ruin the aesthetic of the bike

  1   2   3   >