i'm at work right now--I will get that info tomorrow!!
Rich K
W2RRK
x
To: Repeater-Builder@yahoogroups.com
From: aseyb...@andrewseybold.com
Date: Wed, 8 Sep 2010 16:38:49 -0700
Subject: RE: [Repeater-Builder] Wacom WP-639 Duplexer question
What repeater are you running? Is
Good evening Eric,
Maybe this is why when the trasmit power is dropped to the 20-50 watt range,
the receive opens way up like it should. However, according to the spec sheets
regarding the Wacom SP-639 Duplexer, it is rated for 200 watts. So, again, not
sure what's going on. We will be
From: ah...@ah6le.net
Date: Wed, 8 Sep 2010 18:24:41 -0700
Subject: RE: [Repeater-Builder] Wacom WP-639 Duplexer question
At 06:18 PM 9/8/2010, Richard Kelly wrote:
We will be trying other things such as adding a second ground rod
outside the shack instead of the single one we use now
There is an RSS software solution (bitbang) to get rid of the alarms.
Connect the RIB to the operating MSF.
From the main menu hit ALT-F5. A command line bar will appear telling you to
enter an IPCB command. Enter the following: (WITHOUT the quotes)
/1e1607160800FF
it is CASE
.
--- In Repeater-Builder@yahoogroups.com, MCH m...@... wrote:
How do you set it back to normal?
Joe M.
Richard Arnold wrote:
There is an RSS software solution (bitbang) to get rid of the alarms.
Connect the RIB to the operating MSF.
From the main menu hit ALT-F5. A command
The 5184621K70 cross references to 5184320A13. As a generic, its an LM-741
op-amp.
--- In Repeater-Builder@yahoogroups.com, ac6vj ac...@... wrote:
Hi Gang,
I am looking for a Motorola M2170 8 pin DIP IC or a cross reference for it.
It is used in a Mitrek transmit power control
Use your delete key and don't read them.
Richard, N7TGB
http://www.n7tgb.net/ www.n7tgb.net
A nation of sheep will beget a government of wolves.
Edward R. Murrow
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of N2PDQ
Sent: Thursday
So, why do you keep posting this?
Richard, N7TGB
http://www.n7tgb.net/ www.n7tgb.net
A nation of sheep will beget a government of wolves.
Edward R. Murrow
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of AARON LEWIS DINKIN
Sent
I have a pdf copy of the Moto Diplex Manual. If it s needed
I can upload it somewhere.
73, Dick, W1KSZ
-Original Message-
From: skipp025 skipp...@yahoo.com
Sent: Aug 23, 2010 12:49 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Motorola Diplex Antenna Manual
In my line of work we have a term called Jesus clip, which refers to
E-Clips. The phrase was coined when, in removing one, it would go ping and
fly off to parts unknown. So, the first words said by the Tech, were: Jesus
where did that go?
Richard, N7TGB
http://www.n7tgb.net/ www.n7tgb.net
Well, I think it's funny.
Richard, N7TGB
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Kenneth Cook
Sent: Friday
Sorry to hear of that. I hope you can get your computers cleaned once and
for all.
Richard, N7TGB
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
continuously.
Richard
--- In Repeater-Builder@yahoogroups.com, Brian J. Henry bhe...@... wrote:
I have an MSR 2000 repeater that I want to change the PL frequency on. Does
anyone know if a KLN 6210A vibrasender will work in place of a KLN 6209A
vibrasponder on the MSR 2000 PL board?
Curiously
Who knows? When I see someone spamming a bunch of Yahoo groups, it can't be
good, and I definitely won't click on a link in the message.
Richard, N7TGB
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From
Allow me to show my age ...
To me, the HT-220 is/was a Xtal Controlled Ht !!
The Forward/Reverse switch is the buttons on the
side. The flat knob on the right is the element
locking mechanism.
I have three of these and a box full of elements.
They are quite accurate, equaling a Bird 43. The
Gareth,
There are pre-amps on the input side. I have considered the possibility of rf
getting back into the receive side. I am running a similar configuration now
with a mono-band Antenex vhf antenna and Wacom 641's. It seems to be holding
its own.
Rich
- Original Message -
I'd tell him no, because it is illegal.
Richard, N7TGB
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of KD5SFA
Sent
in a 1/4 tube constructed antenna than
that of the type of a mobile whip. at same frequency.
So Again thats not the exact true to a formula explanation but it gets the
picture in the minds eye of the electrical characteristics of an antenna, I
hope its clearer not muddier :-)
Richard
Expect to see them on e-Pay soon ...
...worked last time we plugged them (in)...
73, Dick, W1KSZ
-Original Message-
From: Joe k1ike_m...@snet.net
Sent: Jun 30, 2010 8:36 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Death of a Service Monitor
Worth watching if a
Harbach sells a set of three that is for the SB-220. You might
look at them.
73, Dick, W1KSZ
-Original Message-
From: kq7dx kq...@yahoo.com
Sent: Jun 7, 2010 8:38 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] MOVs for power supply primary
Hello to group,
Is
Tower location is an important piece of the equation. Big difference
between the East Coast and the Sonoran Desert !!
73, Dick, W1KSZ
-Original Message-
From: dgrapach dgrap...@gmail.com
Sent: Jun 2, 2010 9:27 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Advice
You forgot the most important text:
Microwave Spectroscopy by Townes Shalow.
73, Dick, W1KSZ
-Original Message-
From: allan crites wa9...@arrl.net
Sent: May 31, 2010 8:38 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Help Needed (Guidance and advice)
I've seen lots of groups die like that when the owner abandons it, but you
can go to Yahoogroups and do a search for one of similar interest.
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater
He didn't make it clear, but I think he's referring to the
Motorola_Software_Users group he has in the subject line. Repeater-Builder
moderators do an excellent job of spam control.
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
Do you mean a CW ID ?
73, Dick, W1KSZ
-Original Message-
From: Gordon gma...@bellsouth.net
Sent: May 28, 2010 4:46 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Motorola Maxtrac for cw beacon
Is it possible to mod a maxtrac for cw operation for a ham 6 meter
Great system, can't even find my Amateur Extra Class License. I
wouldn't even try to find my GROL !!
73, Dick, W1KSZ
-Original Message-
From: Eric Lemmon wb6...@verizon.net
Sent: May 11, 2010 10:15 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] if you have a
For kicks, I re-tried it using various combinations of First Name ,
MI and Last Name. It finally hit on LN, FN, MI.
That's not how the licenses read ???
Glad I didn't check the exact match box !!
73, Dick, W1KSZ
-Original Message-
From: Eric Lemmon wb6...@verizon.net
Sent: May 11,
that good info!
Richard
From: Geert Jan de Groot pe1...@xs4all.nl
To: Repeater-Builder@yahoogroups.com
Sent: Sat, May 1, 2010 7:34:56 AM
Subject: [Repeater-Builder] Re: license-free radios
1272619009.275.56317...@yahoogroups.com
While this one is not a huge
this will get things stirred up now won't they?
Richard
From: J C jcar...@k9nzf.com
To: Repeater-Builder@yahoogroups.com
Sent: Sat, May 1, 2010 12:30:08 AM
Subject: [Repeater-Builder] Re: A warning to Land Mobile Radio Dealers
If my life is in danger, I am going
of the opinions
expressed are pretty funny.
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Mike Besemer (WM4B
It looks very professionally done. I use something similar, except that it
is glued to a heat sink fin.
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
The few hams I've talked to, say well, the frequencies aren't ours anyway,
so the FCC can do whatever they want with them. So, given that attitude, I'm
not surprised that few are commenting.
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
Can you send me a copy of the program,please?
Thanks,
a...@n7tgb.net
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com
Thanks!
Sounds like it is time to change the password for the site, hmm?
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com
I have a Low-Split Maratrac (10 Meters) with a blown front end
(and I do mean fried ... looks like someone transmitted into it).
Do you have any Low-Splits with a blown Transmitter I can salvage
the receiver board from ?
Thanks, Dick, W1KSZ
-Original Message-
From: Thomas Oliver
Looking for a spare Low-Band Receiver, 12 or 13 split.
Failing that, I'll take the whole mobile.
Anyone have one they want to part with ?
Thanks, Dick, W1KSZ
The Low-Band MASTR II I am putting on 10 does not have
the Pre-Amp installed on the Receiver.
What are your opinions on adding one ? Is it worthwhile ?
73, Dick, W1KSZ
30 - 42 ???
I thought there was a 30 - 36 AND a 36 - 42 split.
73, Dick, W1KSZ
-Original Message-
From: kd8biw kd8...@hotmail.com
Sent: Apr 2, 2010 8:12 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Maxtrac
John,
I have 2 Micors, both low band. I have 1
The combination number says it is a two channel 150-174 Mhz
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf
Heh Thanks, I just sprayed coffee all over my keyboard!
Richard
www.n7tgb.net
The problem with socialism is that eventually you run out of other people's
money
--Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf
Don't pitch them yet. If all else fails, they are programmable
devices and can be recycled.
I'll take them if no one else needs them. I can read what's in them
and see if I can make sense out of it.
73, Dick, W1KSZ
-Original Message-
From: larryjspamme...@teleport.com
On the subject of PL Encoder/Decoder: I was hoping that they
existed in a form factor that could plug into the MASTR II.
Failing that, I'll hardwire something in.
The reason for the different controllers: The NHRC will plug
into the MASTR II Mobile. The PSE will plug into the Card Cage
AND is
and can talk 50 miles
with your 50 watt radio, would you then expect to talk about 200 miles if you
changed it to a 5/8 antenna? Of cours not right? (Most 5/8 are typicaly 4
to 5db, so you kinda ket the idea right)?
Richard
From: Kevin Custer kug
Have forwarded the questions to AA3ID who has the amp apart. We are third hand
at least on this amp but it did
operate at around 60 watts for ten years at 145.110 feeding 800 feet of 7/8
hardline into a ham cut db224.
when the tower came down it was given to me and i misread the pencil
In my view this opens the door to other encroachments on our frequency
allocations.
Richard
www.n7tgb.net http://www.n7tgb.net/
Government's first duty is to protect the people, not run their lives.
-- Ronald Reagan
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
I believe the ARRL did. I posted the link to it in an earlier message.
Richard
www.n7tgb.net http://www.n7tgb.net/
Government's first duty is to protect the people, not run their lives.
-- Ronald Reagan
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
I feel a little pessimistic about this, in that I expect it to happen more
frequently as time passes. I hope I'm wrong, but I can't help feeling that
we are going to gradually lose our spectrum as companies with deep pockets
buy our frequencies out from under us.
Richard
www.n7tgb.net http
Since they'd be competing with high powered repeaters and government radars,
I thought 2.4 gig would have been a better choice than 70cm, but that's just
me...
Richard
www.n7tgb.net http://www.n7tgb.net/
Government's first duty is to protect the people, not run their lives.
-- Ronald Reagan
Try this: http://www.arrl.org/news/stories/2010/02/25/11361/?nc=1
Richard
www.n7tgb.net http://www.n7tgb.net/
Government's first duty is to protect the people, not run their lives.
-- Ronald Reagan
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
That is my concern, it'll be a foot in the door.
Richard
www.n7tgb.net http://www.n7tgb.net/
Government's first duty is to protect the people, not run their lives.
-- Ronald Reagan
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf
!
-Richard
From: Chuck Kelsey wb2...@roadrunner.com
To: Repeater-Builder@yahoogroups.com
Sent: Sun, February 21, 2010 8:36:35 AM
Subject: Re: [Repeater-Builder] Re: DB-201 Measurements for 6 Meters?
First, the DB-201 was not designed for tower side-mounting
Should you not have a copy of the manual, you can get one from my website;
it is a great help and is how I learned to program those controllers.
http://www.n7tgb.net/Pages/radio/controller_manuals.htm
Richard
www.n7tgb.net http://www.n7tgb.net/
_
From: Repeater-Builder
-
From: Repeater-Builder@ mailto:Repeater-Builder%40yahoogroups.com
yahoogroups.com
[mailto:Repeater-Builder@ mailto:Repeater-Builder%40yahoogroups.com
yahoogroups.com] On Behalf Of Richard MI Ranta
Sent: Wednesday, January 20, 2010 9:41 PM
To: Repeater-Builder@ mailto:Repeater-Builder
Wow, I wasn't aware lightening could do so much damage! Thanks Bob.
I'll pass that on to the technicians or they probably have already read it
here. ( yes, some of the technician's and even engineers read this list!)
We have replaced the repeater, so that much has been done. We may be in the
I thought I'd better update the list on what was found. First off, the
entire repeater was taken in to the shop for exhaustive testing. The can's
were taken apart, inspected and cleaned. All that was visibly found was a
little carbon. The two service monitors showed they were working ok. But,
Sorry if I've been late in posting. First, the antenna and hard line is ok.
We've tested that part out and its working. We think ( I ) that we got zapped
through a unused phone line which is mounted behind the repeater rack.
Yes, we have tested the can's using both a IRL (?sp) and a General
I know its been a long time since I first posed the question on what might be
causing the noise we were experiencing after being hit by lightening. After
many trips to the Technical shop for testing, we replaced the repeater ( was a
vertex 5000, now a Icom ur2000) and are in process of checking
I have two old rotary phones, one is an old fashioned wooden wall mount that
was built in the 60s.
Richard
http://www.n7tgb.net/ www.n7tgb.net
It does not take a majority to prevail ... but
rather an irate, tireless minority, keen on setting
brushfires of freedom in the minds of men
even a picture or the part number of
that PA would help.
Best Regards
Richard.
From: Greg Niles k9...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Tue, January 5, 2010 9:33:59 PM
Subject: Re: [Repeater-Builder] Mastr II mods and parts
I am new
.
-Richard
From: Eric Lemmon wb6...@verizon.net
To: Repeater-Builder@yahoogroups.com
Sent: Sun, January 3, 2010 8:26:41 PM
Subject: RE: [Repeater-Builder] Cold MVP
Randy,
I am surprised that your building inspector allowed your repeater to be
installed
Tom,
Please be advised that boating laws do not specifically require a battery to be
in a box. What they do require is a battery to be securely mounted and the
non-grounded terminal covered. Most folks interpret that as a battery box or
bracket to old the battery in place. Most folks
Thanks, I appreciate it!
Richard
http://www.n7tgb.net/ www.n7tgb.net
It does not take a majority to prevail ... but
rather an irate, tireless minority, keen on setting
brushfires of freedom in the minds of men.
--Samuel Adams
_
From: Repeater-Builder@yahoogroups.com
Well, it certainly is off topic, but you should have more of an open mind.
After all, people are entitled to their opinions, and to be able to speak
their minds.
Richard
http://www.n7tgb.net/ www.n7tgb.net
It does not take a majority to prevail ... but
rather an irate, tireless minority, keen
Sure makes it look easy...
Richard
http://www.n7tgb.net/ www.n7tgb.net
When they call the roll in the Senate,
the Senators do not know whether to
answer 'present' or 'not guilty.'
--President Theodore Roosevelt (1858-1919)
_
From: Repeater-Builder@yahoogroups.com
que você
está procurando.
abraço
-Richard
From: Gustavo (Pu3gbw) pu3...@hotmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Tue, October 27, 2009 1:54:17 PM
Subject: [Repeater-Builder] Repeater Kenwood TKR-720
Greetings to all the group!
Hello
. (But not when you take them apart they are
quite the beast)
Good luck!
-Richard
From: Milt men...@pa.net
To: Repeater-Builder@yahoogroups.com
Sent: Sun, October 18, 2009 9:38:14 AM
Subject: Re: [Repeater-Builder] Re: GE Lookout Repeater related info needed
Thanks John for that Info. Will be headed into Town tomorrow get what you
recomend.
Wesley
- Original Message -
From: John Sehring
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, October 18, 2009 11:53 AM
Subject: [Repeater-Builder] Wavetek gone south
I've been
Thanks Charles. Will try that. Have been thinking all day about buying an
Motorola or IFR. Hope that works. TKS
73 Wesley
- Original Message -
From: Ham-Radio
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, October 17, 2009 10:59 PM
Subject: RE: [Repeater-Builder]
Hi Walt,
Measure the radials of the ground plane, that might get you close. If there
near about 6 inches then its UHF, if they are near around 15 to 18 then it
would be in the VHF rage. But a picture could help some one spot it right away.
Regards
-Richard
Boy, would I love to visit that museum! I do remember some of that stuff,
and I used to own some of it.
Richard
http://www.n7tgb.net/ www.n7tgb.net
When they call the roll in the Senate,
the Senators do not know whether to
answer 'present' or 'not guilty.'
--President Theodore Roosevelt (1858
Hi Bob,
You won't know until you ask the seller for the part number. But for the price
I would not fuss over trivial matters such as what split it is. The rest of it
is worth that just for the spare parts.
-Richard
From: n...@no6b.com n...@no6b.com
to the
needy first..;-)
Best regards
Richard
From: adjiqc adj...@yahoo.ca
To: Repeater-Builder@yahoogroups.com
Sent: Monday, September 14, 2009 10:31:20 AM
Subject: [Repeater-Builder] GE Mastr II parts
Hi All,
I am new to this group and I was wondering
I very my search quarry just to get different results. Never know how folks are
spelling things. I have even had good luck finding stuff by incorporating CB
in my search. Got some pretty good deals that way.
-Richard
From: de W5DK w...@gvtc.com
To: Repeater
Mike, please contact me directly at wb9...@sbcglobal.net thanks Rick/rjb
--- On Sun, 9/13/09, Mike Morris WA6ILQ wa6...@gmail.com wrote:
From: Mike Morris WA6ILQ wa6...@gmail.com
Subject: Re: [Repeater-Builder] msf5000 microphone
To: Repeater-Builder@yahoogroups.com
Date: Sunday, September 13,
Hi Tim,
My first suspect would be the cable from the duplex er feeding the 7/8. I have
problems there more than anything. Although the 2.1 swr is a bit high I would
shoot the easy target first.
BR
_richard
From: tahrens301 tahr...@swtexas.net
To:
Tim,
This might be it. I miss read the previous. Try the Ringo for grins and see
what transpires. Might be a bad connection on the old antenna.
BR
-Richard
From: tahrens301 tahr...@swtexas.net
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, September 1
Navy MARS is also requiring a general license.
Richard
http://www.n7tgb.net/ www.n7tgb.net
When they call the roll in the Senate,
the Senators do not know whether to
answer 'present' or 'not guilty.'
--President Theodore Roosevelt (1858-1919)
_
From: Repeater-Builder
on the input freq.
Be safe when you head to the hill and be sure you don't go alone. Never know
what you can get into in those remote locations right.
Good Luck
Richard
From: tahrens301 tahr...@swtexas.net
To: Repeater-Builder@yahoogroups.com
Sent
Hi All,
Any one looking for a Mastr II key (Mobile or base/repeater) only needs to go
to the local lock smith (Not Home Depot or Lowes, they only copy)
The Smith can cut you a key from the book. It is a BF10a. (I have done it)
Best Regards
Richard Fletcher
(before you start
turning the screws). Believe me, I have had to re-tune many a duplexer that
someone turned the screws on because of desense that was a cabling issue and
not the duplexer.
God luck on the adventure..
BR
-Richard
From: tahrens301 tahr
proud of the fact that his *private* system has only three users. This, to
me, is wrong and selfish in many ways.
Richard
http://www.n7tgb.net/ www.n7tgb.net
The trouble with socialism is that you eventually
run out of other people's money.
-Margaret Thatcher
_
From: Repeater
builder dot com
where you can find lots of info on them.
Remember that Google and Bing are your friend! just type in the make and model
of your antenna and you will find more than enough on your antenna.
Best Regards
Richard
From: Laryn Lohman lar
Top quality crimpers are a must, though.
Richard
http://www.n7tgb.net/ www.n7tgb.net
The trouble with socialism is that you eventually
run out of other people's money.
-Margaret Thatcher
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com
Are you kidding? The politicians don't care about the Constitution, to them
it is some totally irrelevant old document. In other words, they ignore it
and do whatever they want.
Richard
www.n7tgb.net
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
with the Motrac other than when its 10 ton PA
gave out. (Its seems to run fine on just the exciter)
Regards
Richard
From: rabre...@sbcglobal.net rabre...@sbcglobal.net
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, June 27, 2009 9:38:48 PM
Subject: [Repeater
-Richard
From: Barry ate...@hotmail.com
To: repeater-builder@yahoogroups.com
Sent: Saturday, June 27, 2009 8:46:58 PM
Subject: RE: [Repeater-Builder] Where to install my repeater antennas
You are going to need a lot more isolation than you are contemplating
got some here please contact me at wb9...@sbcglobal.net
--- On Fri, 6/12/09, GUIDO slars1...@yahoo.com wrote:
From: GUIDO slars1...@yahoo.com
Subject: [Repeater-Builder] LOOKING FOR Motorola 450 to 470 75 watt Micor
Repeater Amp TLE1713A
To: Repeater-Builder@yahoogroups.com
Date: Friday, June
Good morning group.
Ah. Spring is here and with it, a blown output transistor on a Henry C130 AD
30R linear amplifier. It just blew around 8PM Wednesday evening. I thought
it must be lightening strike, due to scorched area around the part and
board. It almost looks like it tried to burn a hole
Please contct me at wb9...@sbcglobal net
--- On Mon, 5/11/09, w1ik w...@arrl.net wrote:
From: w1ik w...@arrl.net
Subject: [Repeater-Builder] Motorola R-2001A Manual(s) needed!
To: Repeater-Builder@yahoogroups.com
Date: Monday, May 11, 2009, 5:36 PM
I am in need of service and operating
are using. Someone else mentioned using the printer port
and it seems to me that it would be ideal for your application.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Vernon Densler
Sent
Gosh, and it didn't sell!
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chuck Kelsey
Sent: Sunday, April 12, 2009 11:01 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater
Some kind of weird sandwich?
Richard
www.n7tgb.net
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chris Curtis
Sent: Wednesday, April 08, 2009 2:31 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder
YEah, but it is something that would be expected from California. grin
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of David Struebel
Sent: Wednesday, April 08, 2009 5:26 PM
To: Repeater
apology
I fired off this reply without paying attention to the group it was
going to. Had I paid attention, I would have toned down the politics a
little. My apologies, I wasn't trying to anger anyone.
/apology
Yes, it was a surprise.
Richard
http://www.n7tgb.net/ www.n7tgb.net
them with hundreds of millions of dollars
instead. In other words, your typical democratic congress at work.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of wd8chl
Sent: Sunday, February 08
One should be worried about impressions, though.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of
rert...@ix.netcom.com
Sent: Friday, January 23, 2009 5:01 PM
To: Repeater-Builder
The Windows 98 boot disk for installation of windows has those files.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of skipp025
Sent: Sunday, January 18, 2009 5:10 PM
To: Repeater-Builder
That thought had crossed my mind. I think I will.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chuck Kelsey
Sent: Friday, January 09, 2009 6:34 AM
To: Repeater-Builder@yahoogroups.com
I also have two TV converter coupons that I won't be using either, if
anybody wants 'em.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Larry Wagoner
Sent: Thursday, January 08, 2009 5:17 PM
doggone it... I just looked at them and they expire Monday, so there
isn't any way to send them to anybody that they'll get there in time.
I thought they expired in February, but there I go, thinking again.
Sorry...
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater
1 - 100 of 370 matches
Mail list logo
