It's easier for me to just download the new binary than to try to fix
this, but for development purposes the following messages may be
useful:
sage: An error occurred while installing ntl-5.4.1.p10
Please email sage-devel http://groups.google.com/group/sage-devel
explaining the problem and send
executing code in Maxima
CODE:
log(0);
Maxima ERROR:
log(0) has been generated.
Presumably log(0) should provide a more helpful (and much shorter)
error message. And what does this phrase, log(0) has been
generated, mean?
- kcrisman
free option which supports
mathematics in pedagogically sound ways all the way from arithmetic
and geometry to arithmetic geometry will exist, with huge benefits for
anyone who cares about more than one level of mathematics.
- kcrisman
Here Follows A Perhaps Superfluous Long List Of Limiting
implementing (I realize the grep-ish behavior might be too complicated
to bother with)? I am sure there are mistakes in the pseudo-code
above, for that matter. But if so, I would like to try.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel
I asked a math major who also has difficulty seeing certain colors on
screens and projection, and here is what she said, if it helps make a
decision.
- kcrisman
I like the light pink the best. The red is a little dark and makes it
hard to read the black lettering
Sorry - that was during our spring break and I must have missed it.
Anyway, nice to see it getting play on the MAA website as well, where
I saw it first.
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from
practical. Is there a way to
run the docbuild just on one file/one set of files?
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to
sage-devel-unsubscr...@googlegroups.com
TinyMCE could handle it is appended
in REVERSE order at the bottom of the worksheet - check it out! I
hope this helps Jason or someone else replicate it.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe
with save and
cancel buttons that do nothing; also, all text is now just plain
text. At this point I usually have to just save the worksheet, reopen
it, and hope for the best.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel
-documented underscored functions in
Sage, so that is not the problem per se. Also, it appears you are
using a global Sage install, but I have no idea whether that would
affect anything.
Hope this helps, but it likely won't. Good luck.
- kcrisman
!
By the way, the release notes for 3.0.3 never happened, but they do
exist (somewhere) on sage-devel if you go through them enough (as I
had to once), so if you are looking for something to occupy a half-
hour (!) you could add those... ;)
- kcrisman
Leibniz notation at all?), or is it only in
the case (b) when the argument is an expression?Thanks for the
clarification.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email
://sage.math.washington.edu/home/mvngu/doc/changelog/HISTORY.txt
:) That's all I'm saying. Thanks again for the hard work.
Best,
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send
statement is of the plot3d version. However, I thought I would ask
before opening a ticket to remove the (presumptively) older one - any
comments?
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from
Compiled fine on OSX.4 G4 PPC.
There were a lot of warnings in Sphinx at the very end about duplicate
references within the English tutorial, usually with bibliography.rst.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel
.alpha0 and see why/
if they failed. Tom and I will eventually do this, but it would be
helpful for people involved in the ticket to get things started:
Is there an -upgrade location to go to?
Thanks,
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send
equations.
* Constrained and unconstrained local and global optimization
no clue
would that include cvxopt? other similar tools?
* Continuous and discrete integral transforms
no clue
maybe this means Fourier, Laplace, Mellin (cont.) and discrete Fourier
(disc.)?
HIH,
- kcrisman
A related page to look at would be
http://en.wikipedia.org/wiki/Comparison_of_computer_algebra_systems
Note that Mma is declared there to be ubiquitous while Maple only
notes its libraries' sources are viewable. Our friends at Axiom even
link from there to a video!
- kcrisman
Is there an -upgrade location to go to?
If the answer is no for the foreseeable future, that's
understandable. Just asking!
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send
to building it), e.g. sage-4.1.alpha1/doc/output/html/
en/reference/_sources/sage/rings/laurent_series_ring_element.txt
Hope this helps.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send
Thanks for that explanation, gsw. I feel like I have a better sense
of why that happened so often in class!
- kcrisman
On Jun 25, 4:10 pm, gsw georgswe...@googlemail.com wrote:
Hi,
I suspect you're just running out of RAM.
Not necessarily physically, but the construction Sage -- expect
Built fine on G4 OSX.4.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group at http
running in the
background? But when I quit, there is no message about that, and in
any case presumably GAP doesn't do the codebase search.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group
!
More concretely, one problem is that plot/axes.py is not very well
documented. However, you might want to look at _tasteful_ticks and
_draw_axes_labels. Or you might want to try to finish # 5448. :)
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send
? But when I quit, there is no message about that, and in
any case presumably GAP doesn't do the codebase search.
- kcrisman
--
William Stein
Associate Professor of Mathematics
University of Washingtonhttp://wstein.org
--~--~-~--~~~---~--~~
To post to this group
naturally occurring functions should be.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group at http
something - maybe import_patch relies on
something in Python 2.5 which is now deprecated?
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to
sage-devel-unsubscr
randomize
between 0 and 1 but not plot outside that range, for the very good
reason you mention.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to
sage-devel-unsubscr
or something else, but at any rate to be consistent.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group
expansion of shell patterns and constructs.
but I don't know where find is used here. Does grep call find? (That
is obviously a shell newbie question, apologies.)
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
put in. Even
sage: search_src(p-adics)
find: -exec: no terminating ;
though in 4.0.1 that gets a page of hits.
I'm really sorry this is so weird. This is OSX.4 on a PPC, so perhaps
something got changed in those scripts recently?
- kcrisman
On Jun 26, 10:53 am, kcrisman kcris...@gmail.com wrote:
ipdb print ex
arctan2(real_part(y) + imag_part(x), real_part(x) - imag_part(y))
Both of these fail because Sage doesn't define a symbolic arctan2
function. There is instead a simple wrapper around arctan in
sage/functions
10.4 to 10.5?)
/usr/bin/find
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group at http
. For comparison, try
sage: plot(2^(20*x),(x,10,50))
which seems to be about as much as float can handle (e+300, about); it
can cut off the left-hand part of the numbers.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
On Jun 26, 2:24 pm, John H Palmieri jhpalmier...@gmail.com wrote:
On Jun 26, 10:33 am, kcrisman kcris...@gmail.com wrote:
I'm really sorry this is so weird. This is OSX.4 on a PPC, so perhaps
something got changed in those scripts recently?
Yes, it got changed in #5806. Can you try
(as opposed to in the cloud)? Linux + new
windowing system sounds ok, but figured I'd ask...
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to
sage-devel-unsubscr
That seems less than desirable, but maybe it's okay?
- kcrisman
At long last, the Mozilla team has heard the voice of reason, and
allows the browser to download fonts! This means no more jsmath
warning! Next week, I'm going to take a crack at remedying this
problem in jsmath itself
with it.
This problem would potentially be much larger in the secondary ed
market, but I am not as sure Sage (in its current non-point-and-click
manifestation) has as large of a market there.
- kcrisman
PS This thread should perhaps also be cross-posted on sage-edu
.
Yes, yes, yes! This whole post is full of great comments. Should be
required reading for those using Sage in lectures or more general
venues.
(You mean deleting all output cells, though.)
- kcrisman
Using Evaluate All before the talk is absolutely critical.
It's also a very good idea
- as
well as to have it on the Mac downloads page - if it isn't already.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to
sage-devel-unsubscr...@googlegroups.com
For more options
Mac binaries...
- kcrisman
On Jul 21, 4:52 pm, Marshall Hampton hampto...@gmail.com wrote:
I would think that is what most people would want.
-Marshall
On Jul 21, 3:42 pm, Robert Bradshaw rober...@math.washington.edu
wrote:
On Jul 21, 2009, at 1:34 PM, gsw wrote:
On 21 Jul., 22:13
Dear John,
Unfortunately, this is the support list for the mathematics software
Sage (http://www.sagemath.org), not the accounting software Sage.
There seems to be some support at
http://www.sagenorthamerica.com/support_training/
but that's the best we can direct you. Good luck!
- kcrisman
project is in a
position for something like this to happen.
But in general, long live Sage!
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to
sage-devel-unsubscr
has repeating decimal of length p-1
for infinitely many p, which (if true) would prove the Artin
conjecture with n=10 (i.e., 10 is a primitive root for infinitely many
p). I think I have that right :)
- kcrisman
On Jul 31, 7:06 am, Minh Nguyen nguyenmi...@gmail.com wrote:
Hi David,
On Fri, Jul
(maybe
wrapped in Sage?) but I don't know much about them.
I hope this helps!
- kcrisman
Where do the 5 and 6 suddenly come from? In my understanding the
elements of the quotient group G/H are classes of elements of G, which
operates on {1, 2, 3, 4}.
Also, there is a method of G called
by wrapping) but also
hopefully allow for more new features as people like e.g. me (no
comma!) who don't know much matplotlib to get accustomed to it and
expose useful things for Sage.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage
will be going that way anytime soon, and perhaps
shouldn't have such semantic interpretation skills, but seems
interesting nonetheless.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send
it up!
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group
sage: var('x,y')
(x, y)
sage: f = -x-y
sage: integrate(f)
-1/2*x^2 - x*y
sage: integrate(f+x) # unambiguous?
-1/2*y^2
sage: integrate(f+y) # unambiguous?
-1/2*x^2
sage: integrate(f) + integrate(x)
-x*y
sage: integrate(f) + integrate(y)
-1/2*x^2 - x*y + 1/2*y^2
I meant
/.../blah.patch,options=--no-commit)
it is MUCH easier to remove the patch after you test it. That means
no more needing to make a new clone for each test, and allows people
like me to avoid using queues just a little bit longer.
- kcrisman
6. ctl-D (quit sage)
7. ./sage -b (to rebuild) or ./sage -br
without a commit, and then revert them all at
once. Right? I haven't actually tried doing that... but as I said,
it's all because I need a personal queues tutorial session before I
use them.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email
, or perhaps plotting) I did want to ask if there were any
opinions.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options
have time to finish this relatively soon.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group
people don't really
read the instructions either).
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit
scratch is
monumental. I suppose without good plotting I wouldn't have used Sage
at all - nor would many others coming from the educational side.
Thanks!
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe
, but this is one
place where even I would draw the line.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options
(as opposed to one initiated by the user)? This could be
related to the problem in reviewing #3587.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel
?
But as Robert says, Maxima performs as advertised. I think that it is
once again clear that Maxima (like matplotlib) has a lot of
functionality which remains unexposed.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
Sorry to be replying to my own post, but in case you need more
arguments supporting (a) above, note that upgrading the spkg's solves
the issues listed at tickets #780, #3718, #6165, #6420, and #6423.
And it makes #3587 look much better. Great work getting the new
Maxima in!
- kcrisman
constellations etc.
If there are any other rings of integers of number fields that show up
a lot they could have shortcuts too, maybe Cyclotomic_Integers(n) or
something, in the way Javier points out.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email
a
variable? It seems like both are symbolic.expression.Expression.
What do the other major systems do with this - do they insist on sqrt
(-1) or CC(i) or something like that? If everyone expects this coming
in, it is an argument for it - not decisive, but a significant
argument.
- kcrisman
sage: solve([x==1,y+2==3],x,y)
[[x == 1, y == 1]]
sage: solve([sin(x)=sage: solve([sin(x)==1,y+2==3],x,y)
[]
Actually, this is a bug in Maxima.
(%i8) solve([x=1,y=1]);
(%o8) [[y = 1, x = 1]]
(%i9) solve(sin(x)=1);
solve: using arc-trig functions to get a
will try to fix a few of these things while fixing some
other things in solve I am already working on.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr
509, in solve
sol_dict=[dict([[eq.left(),eq.right()] for eq in solution]) for
solution in sol_list]
TypeError: 'sage.symbolic.expression.Expression' object is not iterable
See if #4786 fixes this. (In the sense that [{sin(x): cos(x)}] would
be better than an error.)
- kcrisman
sum is not slowed down.
I apologize for putting the general call out, but it's really a crime
that this functionality from Maxima hasn't been available. We should
be able to find out ζ(4)=π^4/90 from Sage, not from memory or checking
a book.
Thanks for anyone - I know I'll enjoy using it!
- kcrisman
Also see http://trac.sagemath.org/sage_trac/ticket/6165.
On Sep 15, 9:28 am, kcrisman kcris...@gmail.com wrote:
As for you for now, you'd need to change the eigenvectors() command in
the matrix code. If you wanted to do so and submit a patch, it would be
greatly appreciated!
But all
I've labeled critical. Suggestions for how to approach the
fix?
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more
technical reasons described in
those tickets.
But the work is mostly done! So hopefully all of these issues can be
sorted out soon.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group
. Unfortunately, it
doesn't
look easy to keep an exact-solution-only behavior here. The author
of
to_poly_solve expects to fix some bugs later this fall, but probably
not this aspect, since it's not a bug in Maxima, rather in our use of
Maxima.
- kcrisman
with .DS_Store (must be a Mac issue,
correct?). Is this known? The second time I try to save, it works.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel
software).
It would be great if anyone knew any R developers (or very heavy
users) who could join sage-devel and give relevant feedback, like we
have with Maxima and other upstream packages.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email
miss some solutions that way,
because it's unlikely that Maxima will be able to change its behavior
very soon, even if they wanted to.
- kcrisman
On Sep 16, 9:42 am, kcrisman kcris...@gmail.com wrote:
Sorry, I think you both misunderstood my question :) If I was having
trouble in that sense, I
there).
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/sage
think others did as well).
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group at http
for many of the
applications of Sage.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group
it in!
- kcrisman
I view the request for echelon form as asking for leading ones in each
row (the form of the result) and you won't generally get that without
division, so the call gives permission to adjust the base ring. If
you don't want your ring messed with, call for hermite form
On Sep 19, 11:41 am, Burcin Erocal bur...@erocal.org wrote:
On Fri, 18 Sep 2009 09:34:35 -0700 (PDT)
kcrisman kcris...@gmail.com wrote:
I don't know if there is a way to get at where coefficients of
elements in SR come from; they all just become symbolic expressions.
Even
suggest in your last paragraph.
Thanks!
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group
of other
people, since Sage is so natural for NT and plus William's book is
already out there...
- kcrisman
Rob
On Sep 21, 6:17 am, kcrisman kcris...@gmail.com wrote:
Rob,
Please do this! I am always having to do some hack in my number
theory class for this, and it is very annoying
FYI, for those who have been discussing this:
http://mathdl.maa.org/mathDL/55/?pa=contentsa=viewDocumentnodeId=3340
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email
.
-kcrisman
On Sep 22, 2:10 am, Minh Nguyen nguyenmi...@gmail.com wrote:
Hi John,
On Tue, Sep 22, 2009 at 12:20 PM, John H Palmieri
jhpalmier...@gmail.com wrote:
SNIP
On sage.math, using the prebuilt binary, I'm getting a ton of errors,
mostly of the sort
TypeError: Unable to start
Built fine on OSX.5. However, get odd behavior of tab-completion.
Before, it would leave you in just the right spot to add (), but now
it goes exactly one space further, necessitating an awkward
backspace. Has anyone else noticed this?
- kcrisman
Who will file ticket # 7000?
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group at
There is a trac ticket for that already, fyi.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group
look at this through Google groups, so I know
that what I say here is public for ever, or at least until digital
media succumb (which might be sooner than vinyl...). IRC is a
different, more supple - and hence more flame-susceptible - than this
venue.
- kcrisman
users don't have web access all the time.
+1
It might also be worthwhile to have links to these docs straight from
the HTML pages Sage builds. It turns out there is a lot of
documentation for Maxima right in Sage, for instance.
- kcrisman
willing to read the articles.
These are actually very nice, well formatted and informative. I look
forward to seeing the finished series.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from
When upgrading from 4.1.2.alpha2, I had to commit a change to
something about primes in extcode. I should have written it down -
sorry. Did anyone else see this?
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
in organization this would be! Thanks for
volunteering. Particularly for those sent to the Wiki from
sagemath.org, since there is a lot of information there which is
difficult to find.
One typo so far - sage-marketing has one 't'.
- kcrisman
--~--~-~--~~~---~--~~
To post
if the spam was related to Sage...
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel-unsubscr...@googlegroups.com
For more options, visit this group
Finally! Thank you.
(And now Jason can use this to close the ticket which requests it,
http://trac.sagemath.org/sage_trac/ticket/3951, which he participated
in by creating it.)
- kcrisman
On Sep 29, 3:43 am, William Stein wst...@gmail.com wrote:
On Tue, Sep 29, 2009 at 12:25 AM, Jason Grout
of hidden in the Pynac spkg
rather than being easy to get at. I understand the rationale behind
that, but it's still unfortunate that one would have to make a new
spkg to fix something like this (if indeed it needs fixing).
/mini-rant
- kcrisman
the default .png viewer,
maybe is there a way to use a default .dvi viewer, if such a thing
exists. This would be the case in OSX if one hasn't installed it via
Fink or some other way (and would one have to open X11 to do so even
then?).
- kcrisman
, 'show'
sets things in displaystyle, which doesn't use the smaller font for
fractions, etc.
Sorry, didn't mean to imply that your patch did have anything directly
to do with it - it just caused me to wonder whether things were
exactly what you confirmed them to be - thanks!
- kcrisman
on
that. I barely got the chance to meet many now-familiar names at the
San Diego ones, so I hope to see many of you there!
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to [EMAIL
I'm not sure I understand the problem. Here is an example session in
Sage 3.0.1. Can you change this to illustrate what you mean?
Sorry, Jason, the example was sort of buried in my post. Here is a
concise version.
sage: A=matrix(QQ,3,range(9))
sage: A
[0 1 2]
[3 4 5]
[6 7 8]
sage:
scale a row of a matrix over QQ by I or \sqrt{2}).
Thanks for any feedback.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit
that this idea
carries the day in finishing work on this ticket (which may now take a
bit longer). Thanks very much for the input.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email
that a way to do this actually exists,
or that if it exists it might not be really hard.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options
. If it
seems good I can file a Trac for it, if not or it's too hard to
implement that's okay too.
- kcrisman
--~--~-~--~~~---~--~~
To post to this group, send email to sage-devel@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more
1 - 100 of 2609 matches
Mail list logo