Hi Dirk:
Using the latest master (compiled on my Arch box), I get:
On 19-09-2016 18:20, Dirk Hohndel wrote:
Here's a specific request for testing:
Go through the preferences. Check whether "Apply" does the right
It does.
thing. Check whether "Cancel" does the right thing.
It does.
Chec
On 23-09-2016 06:21, Dirk Hohndel wrote:
I'd appreciate if you could verify all this (and more testing would be
extremely welcome, too) :-)
Still true. And please - not just John - we really need more people to test.
Hi Dirk:
I've tested the changes on the preferences and it seems to be wor
Thread 0x7fff6b7fe700 (LWP 10187) exited]
[Thread 0x7fff7a1e8700 (LWP 10133) exited]
Thread 1 "subsurface" received signal SIGSEGV, Segmentation fault.
0x7fffef53c446 in strlen () from /usr/lib/libc.so.6
(gdb) exit
I'm running Subsurface on Arch. Any hints?
Cheers:
Pedro Ne
On 01-11-2016 17:47, Tomaz Canabrava wrote:
Can you compile in debug mode?
Can I use: ./subsurface/scripts/build.sh -DCMAKE_BUILD_TYPE=Debug
Or do I have to do it some other way?
Cheers:
Pedro
___
subsurface mailing list
subsurface@subsurface-dive
On 01-11-2016 18:13, Tomaz Canabrava wrote:
You have a build directory inside subsurface ser folder, Just go there
and use cmake .. -dcmake_build_type=debug and then run make.
Doesn't see to change much, does it?
Starting program: /home//Diveapps/subsurface/build/subsurface subsurface
[T
Hi Anton:
On 01-11-2016 20:03, Anton Lundin wrote:
Can you type "bt full" in the gdb prompt and post the stacktrace?
Here it goes:
(gdb) bt full
#0 0x7fffef53c446 in strlen () at /usr/lib/libc.so.6
#1 0x0058a0dd in ()
#2 0x1770 in ()
#3 0x7fffcb00 in (
On 11-11-2016 09:57, Yannick Jarno wrote:
Hi,
Does anybody succeeded in install subsurface under ubuntu 16.10
(yakkety) ?
I added the repositoryppa:subsurface/subsurface but it
seems incompatible with the OS release
Yannick:
It might be better if you download and run Subs
On 13-12-2016 02:25, Steve wrote:
I'd love it if people could spend some time testing this. Assuming the builds
aren't completely hosed I'd love to announce this tomorrow.
I'm running latest appimage on my Arch machine. A few things I've noticed:
- I had to install libselinux in order to run
Dirk:
Despite having translated all new strings to Pt, Transifex still says
that there are 2 untranslated strings (which don't show up when I select
"Untranslated"). Ignore?
Cheers:
Pedro
___
subsurface mailing list
subsurface@subsurface-divelog.
On 05-01-2017 09:17, Willem Ferguson wrote:
Does anyone have any information about this? It is listed as a new
feature of Subsurface V4.6 Beta V1.
Hi Willem:
I know Salvador contributed with some code for an external application
that imports .slg files and converts them to Subsurface logbooo
Hi Willem:
On 05-01-2017 13:10, Willem Ferguson wrote:
Pedro, that would be really great because I have not used that
facility at all. The user manual has a section dealing with imports
from protrietary divelogs, e.g. Mares, Suunto. I would suspect we
would put the Scubapro information there a
Hi:
I've tried building the Smartrak-import tool by enabling the
SMARTTRAK_IMPORT=ON option on cmake.
However, the build process reaches 100% without any errors and without
building the import tool (at least I cannot find it anywhere).
I remember that Salva sent me 2 patches on June 15th, 201
On 21-02-2017 21:28, Dirk Hohndel wrote:
The question becomes: should I leave Transifex source strings unchanged,
create a 4.6 branch, cherry pick the hand full of bug fixes in master that
came in since 4.6.2 (three commits from Linus, a couple from Robert, one
from Jan) and create a 4.6.3 based
On 07-03-2017 04:47, Miika Turkia wrote:
I am quite sure it depends on the language. I.e. divelog and divespot
I would translate, but MOD, END and setpoint I would not, unless
someone who is familiar with Finnish diving vocabulary tells me what
they actually should be.
My experience leads me t
On 13-03-2017 10:52, Willem Ferguson wrote:
From phone. Alessandro, you need to know whether the Smartek does
only serial infrared (SIR) or fast infrared (FIR). Then you need to
understand whether your Linux driver does any or both of these speeds.
Maybe it is a speed issue? If I remember corr
On 20-04-2017 22:43, Liam Clarke wrote:
Is there anybody that can help?
Hi Liam:
I've tried to convert your logs using smtk2ssrf but I could only convert
Christelle's. Yours just caused the app to crash.
When I tried to open you slg files with Start Trak (on my Windows
virtual machine) th
On 21-04-2017 16:53, Salvador Cuñat wrote:
Dirk has just pushed into master the PR I sent yesterday, which fixes
that crash. It was a segfault due to memory corruption while bookmark
merging.
Hi Salva:
That did it. I've rebuilt smtk import tool from the latest master and
managed to convert
On 26-04-2017 16:55, Dirk Hohndel wrote
I have all the latest translations as of two minutes ago,
Dirk:
I've just completed the translation of a couple of strings that remained
untranslated for PT. Can you pull them before releasing?
Thanks in advance.
Cheers:
Pedro
___
On 07-06-2017 09:07, Robert Helling wrote:
Hi,
I have hooked up the current smtk2ssrf to a cgi script on my server.
But I did not have an example file. Maybe somebody wants to try it:
https://thetheoreticaldiver.org/rch-cgi-bin/smtk2ssrf.pl
Hi Robert:
I've tried with 4 slg files. two fail
On 07-06-2017 10:07, Robert Helling wrote:
could you please try again those that failed? I toyed around with the
script which might have resulted in not operating properly.
Robert:
One worked, the other still failed...
Cheers:
Pedro
___
subsurf
On 07-06-2017 10:14, Robert Helling wrote:
Pedro,
On 7. Jun 2017, at 11:10, Pedro Neves <mailto:nevesdi...@gmail.com>> wrote:
One worked, the other still failed...
could it be that the failed one has the largest file size? I have set
a limit on the file size so I do not get dd
Hi all:
I've been facing a segfault with Subsurface each time I try to insert
cylinder information of my dives. After I download my new dives, I'm
able to fill the Start press., End press, the Work press. and the O2%.
But when I click the Type or Size, I get a segfault. This happens both
with
On 13-06-2017 19:14, Thiago Macieira wrote:
type 'bt" when you get above.
Thiago, my bad ;-)
(gdb) bt
#0 0x7fffef3b51a6 in strlen () at /usr/lib/libc.so.6
#1 0x005a5c33 in QString::QString(char const*)
(this=0x7fffcbd0, ch=0x1770 0x1770>) at /usr/include/qt/QtCore/qstring.h
Lubomir:
On 13-06-2017 21:16, Lubomir I. Ivanov wrote:
random questions:
- are you running from an app-image or is this your build?
It happens both with my build and with the appimage
- which OS / subsurface version?
Arch Linux / Latest from master or with 4.6.4 appimage
- does it happen
On 13-06-2017 22:43, Lubomir I. Ivanov wrote:
replace it with the following:
const int test_row = index.row();
fprintf(stderr, "TEST_ROW: %d\n", test_row); // include if needed
struct tank_info_t *info = &tank_info[test_row];
Lubomir:
This is what I get now:
TEST_ROW: 0
TEST_ROW: 0
TEST_ROW
On 13-06-2017 23:19, Lubomir I. Ivanov wrote:
git apply test_tank_info_model_fix.patch
Lubomir:
After applying your patch it all works as supposed. I can edit cylinder
info without any problems.
Thanks a lot!
Cheers:
Pedro
___
subsurface mailin
On 13-06-2017 23:48, Lubomir I. Ivanov wrote:
but it's probably best for you
to still upload the whole divelog @ dropbox, so that we can test with
it and find the*real* cause.
Lubomir:
I'll try to narrow down the problem in order to create a smaller file
that contains the problem...
I'll k
the example file shipped with Uwatek's app.
I don't know if this parser will do into master (because of its
dependencies) but, at least, your friend may have his dives imported
to Subsurface.
Hi Salva:
I can get you some *.slg files if you need them.
Cheer
Hi all:
Using Subsurface version 4.4.1-225-g0d77b921eb11 I have a segfault when
adding images to my dive.
I select a dive, then load images:
- I get an error message on the load image dialog saying that "not all
images have timestamps between 30 minutes before the start and 30
minutes after
Hi Dirk:
On 03/16/2015 05:15 PM, Dirk Hohndel wrote:
That sucks. Any chance you can run this under a debugger and get us a
back trace?
Here it goes:
(gdb) run
Starting program: /usr/bin/subsurface /usr/bin/subsurface
[Thread debugging using libthread_db enabled]
Using host libthread_db libr
Hi Miika:
On 03/16/2015 05:37 PM, Miika Turkia wrote:
run "bt" after the crash. Debug symbols would also really help us.
qmake -config debug
Done.
Here it goes:
Program received signal SIGSEGV, Segmentation fault.
0x0044a5e4 in dive_set_geodata_from_picture ()
(gdb) bt
#0 0x000
Hi:
I've upgraded the qt on my system to version 5.4.1. When trying to build
subsurface, I get the following error:
linking subsurface
.obj/qthelper.o: In function `getUserAgent()':
-/subsurface/qthelper.cpp:458: undefined
reference to `SubsurfaceSysInfo::buildCpuArchi
On 05-04-2015 00:37, Dirk Hohndel wrote:
I'd really appreciate if everyone could try building in their environment
using cmake...
These are always out of tree builds, so from your subsurface directory do
mkdir ../subsurface-build
cd ../subsurface-build
cmake ../subsurface
You likely need a few
On 10-04-2015 19:49, Dirk Hohndel wrote:
make 2>&1 | tee /tmp/linkfailure.log
Hi Dirk:
Here it goes...
Cheers:
Pedro
[ 0%] Automatic moc and uic for target subsurface_corelib
[ 0%] Built target subsurface_corelib_automoc
[ 0%] Built target version
[ 23%] Built target subsurface_corelib
[ 2
On 10-04-2015 21:04, Dirk Hohndel wrote:
Yeah, so this shows that you need -lpthread after libgit2.a on your link
line. I don't quite understand why this works for me and fails for you,
though.
Which distro is this?
/D
Hi:
I'm using Kubuntu 15.04 (beta)...
Pedro
On 15-04-2015 23:29, Dirk Hohndel wrote:
Those of you building from source... if you haven't switched to cmake,
yet, now would be a very good time. I'm planning to drop support for qmake
fairly soon, so please give it a try and let me know if there are any
issues.
/D
On 10-04-2015 21:04, Dirk Hohndel wrote:
Yeah, so this shows that you need -lpthread after libgit2.a on your
link line. I don't quite understand why this works for me and fails
for you, though. Which distro is this?
On 11-04-2015 00:51, Tomaz Canabrava wrote:
On 10-04-2015 21:04, Dirk Ho
On 07-05-2015 15:48, Miika Turkia wrote:
I know we have also plenty of
people who are able to compile the master, but I wonder how many of
them would actually go ahead and compile another remote branch.
Hi:
I would prefer having it on master, if it's all the same to you guys.
Cheers:
Pedro
Hi all:
When trying to build Subsurface from the latest master, I get the
following error:
Konsole output
/home/paneves/Diveapps/subsurface/git-access.c: In function
‘update_local_repo’:
/home/paneves/Diveapps/subsurface/git-access.c:111:2: error: unknown
type name ‘git_fetch_options’
git
On 29-05-2015 00:10, Dirk Hohndel wrote:
Try again. Now the new code only builds if you set USE_LIBGIT23_API
and have a very recent git master of libgit2 installed. /D
I get the same error:
Konsole output
[ 47%] Building C object CMakeFiles/subsurface_corelib.dir/git-access.c.o
/home/paneves/
On 29-05-2015 05:44, Dirk Hohndel wrote:
My apologies. Fixed now (and tested) /D
Dirk:
Even with a clean build tree, I still get the same error.
Cheers:
Pedro
___
subsurface mailing list
subsurface@subsurface-divelog.org
http://lists.subsurface-di
On 29-05-2015 14:10, Dirk Hohndel wrote:
Oh, I can see how this could happen. Because I didn't push last night.
That did it...
Thanks:
Pedro
___
subsurface mailing list
subsurface@subsurface-divelog.org
http://lists.subsurface-divelog.org/cgi-bin/m
On 28-06-2015 21:48, Thomas 'Mike' Michlmayr wrote:
hi!
On Sun, Jun 28, 2015 at 12:49:13 -0700,
Dirk Hohndel wrote:
[...]
I need to find my Vivid VM and figure this out but right now I'm mostly puzzled.
i've got your PPA running on my vivid box, and there are no problems with
installing or ru
On 03-07-2015 05:19, Steve Butler wrote:
I suspect this morning's attempt was foiled by work's rogue external
WiFi dropping in the middle of downloading one of the modules. The
attempt here at home went further/faster. Apparently libcurl isn't
part of 15.04.
Hi Steve:
I got away with it by
On 04-07-2015 14:05, Dirk Hohndel wrote:
Are there any changes we need to make to the INSTALL file or build.sh
based on your experience?
Dirk:
The only things I normally need to do in order to run subsurface on my
Kubuntu, that aren't on the INSTALL file are:
- add myself to dialout group
On 04-07-2015 16:51, Dirk Hohndel wrote:
Can you send a patch? :-)
Here it goes:
Please let me know if it's ok.
Cheers:
Pedro
>From e9eeb06f2537205fd20d50adf8232700444579f9 Mon Sep 17 00:00:00 2001
From: Pedro Neves
Date: Sat, 4 Jul 2015 17:00:30 +0100
Subject: [PATCH] Install n
On 04-07-2015 15:30, Dirk Hohndel wrote:
Could someone with access to different dive planning software please
run a few test plans for me?
Let's do the profile that Rick quoted from the VPM documentation:
three gases: 15/45, 36%, 100%
descent rate to bottom of 75ft/min down to 260ft (weird...
On 05-07-2015 22:48, Linus Torvalds wrote:
Are they, though? At shallow depths, sure. But do metric divers really
prefer "21m/24m" to "20m/25m"? That sounds odd.
I sure do...
.. but maybe that's just me...
Pedro
___
subsurface mailing list
subsurfac
On 16-07-2015 10:18, Davide DB wrote:
+1
But actually they are uncommon cases so I strongly prefer having the
software helping me with the most common use case.
Moreover in the above cases I can easily solve the problem naming them
slightly different. i.e. "Blue Corner - South Wall" & "Blue Co
On 18-07-2015 15:32, Dirk Hohndel wrote:
I noticed this too, but only after reading Salvador's email. Until reading
his email I hadn't bothered completing words, and just selected the site I
wanted before I had finished typing the first word. Hopefully it isn't too
hard to fix.
Curious. I neve
On 17-08-2015 14:16, Dirk Hohndel wrote:
I've been saying this for a while now. But I'd like to actually try and
make this happen sooner rather than later...
So here's what I can remember of the top of my head...
User manual
===
That needs massive work for all the amazing features th
Dirk:
I've added our PPA to my system (ppa:subsurface/subsurface-beta) and
I've installed it on my Kubuntu 15.04 machine.
The packaged installed fine and it identifies it self as 4.5 Beta 1.
I've noticed however that there are many untranslated strings in PT (I
always use Subsurface in EN, but
Hi all:
I've successfully build subsurface from master on Kubuntu 15.10 (beta),
on Debian SID and on KaOS.
However, when I try to execute the subsurface.desktop file, I get the
following message:
KDEInit could not launch 'subsurface':
Could not open library '/usr/lib/libkdeinit5_subsurface'
On 10/01/2015 08:54 PM, Lubomir I. Ivanov wrote:
what if you havigate to the executable location and just do a:
./subsurface
Then it runs, but the map stays black:
./subsurface
can't find Qt localization for locale "C" searching in
"/usr/share/qt5/translations"
can't find Subsurface localiz
On 10/01/2015 09:45 PM, Dirk Hohndel wrote:
So it can't find the marbledata.
Are you starting it from your build directory? Subsurface should have all
its paths right when started from there...
I believe so. On my system I build on the Diveapps directory. Inside
that I have:
grantlee/ instal
On 02-10-2015 09:02, Lubomir I. Ivanov wrote:
On 1 October 2015 at 23:52, Pedro Neves wrote:
On 10/01/2015 09:45 PM, Dirk Hohndel wrote:
So it can't find the marbledata.
Are you starting it from your build directory? Subsurface should have all
its paths right when started from there...
On 14-08-2017 12:20, Eric Schlicker wrote:
Dear Subsurface Team,
in the past I dived a lot and made nearly 330 dives. But then my wife
get 3 kids and I quit diving for a long time. Now my oldest son made
his dive license and so we will dive together. In the past I had a
dive log software on
Hi all:
I'm trying to connect with my new G2 using subsurface
4.6.4-720-ge04ef1df1e2b but the download fails with:
Insufficient privileges to open the device LE:00:13:43:54:88:8D Scubapro
(G2)
I've added myself to lp and uucp groups but still no luck. Does anybody
knows which groups do I n
On 12-10-2017 19:11, Linus Torvalds wrote:
Do you get any debug messages when you run subsurface from the command
line? Can you cut-and-paste those into the email?
Linus:
This is what I get on the terminal:
Starting download from BT
Starting the thread 0
INFO: FTDI disabled
qt.bluetooth.blu
On 12-10-2017 21:42, Linus Torvalds wrote:
On Thu, Oct 12, 2017 at 1:35 PM, Pedro Neves wrote:
This is what I get on the terminal:
Starting download from BT
Starting the thread 0
INFO: FTDI disabled
qt.bluetooth.bluez: Bluez 5 detected.
qt.bluetooth.bluez: Enabling GATT request timeout
Linus:
Only today I had a chance to dive with my new G2 and thus get some
diving data on it.
The download to Subsurface went without any issues, after I paired my G2
using bluetoothctl instead of the KDE/Plasma applet. I'm using the
latest master and even the heart rate data (I was using Scuba
Hi:
After a short test with the latest master, I've found a few
oddities/issues. Some are related to translations (I was checking PT-pt)
and others related to the software itself.
On the translations side, I've noticed that while Subsurface is using
the PT-pt strings, there are a few situati
On 26-10-2017 07:01, Stefan Fuchs wrote:
What value is displayed for the compass bearing? If it's '-1' all the
time then I'm working on a fix for this.
But imho it's not the case that your G2 is transmitting the the
current compass "direction" but it would report if you set a fixed
bearing. Did
On 26-10-2017 18:16, Stefan Fuchs wrote:
Regarding the info box string there is an obvious mistake in the PT
translation:
https://github.com/Subsurface-divelog/subsurface/blob/master/translations/subsurface_pt_PT.ts#L9441
Last char has to be a 's' not a 'f'.
Stefan:
Thanks for catching it.
Dirk:
Is there any chance you could pull the translations (pt-PT) from
Transifex into master so I could test it again?
Thanks in advance...
Cheers:
Pedro
___
subsurface mailing list
subsurface@subsurface-divelog.org
http://lists.subsurface-divelo
On 28-10-2017 16:00, Dirk Hohndel wrote:
On Oct 28, 2017, at 7:51 AM, Pedro Neves <mailto:nevesdi...@gmail.com>> wrote:
Dirk:
Is there any chance you could pull the translations (pt-PT) from
Transifex into master so I could test it again?
Thanks in advance...
Of course. I wan
Hi all:
I've been having troubles building Subsurface with user manual. No
matter how many times I set the build options "NO_DOCS" and
"NO_USERMANUAL" to OFF (with ccmake . or ccmake build), subsurface is
always built without user manual (The option "USE_WEBENGINE" is set to ON).
After the b
On 29-10-2017 11:27, Willem Ferguson wrote:
Pedro,
There is a command-line option -BUILD_WITH_WEBKIT. specify that at
build time. That is what worked for me.
Willem:
I'm using:
./subsurface/scripts/build.sh -BUILD_WITH_WEBKIT=1
But still no luck. Was this what you meant?
The ccmake optio
On 29-10-2017 14:50, Dirk Hohndel wrote:
Is qt webkit installed? I'm on my phone, I don't quite remember the package
name, but without that it will always revert to no user manual
I have qt5-webkit installed...
Pedro
___
subsurface mailing list
sub
On 29-10-2017 19:08, Dirk Hohndel wrote:
Great catch, there were a few translation markings missing. Of course
this code hasn't changed in a LONG time, so we've had this problem for
a while :-)
/D
Yes. Although I'm translating Subsurface to pt_PT, I always use it with
EN...
I've transla
On 30-10-2017 11:18, Tomaz Canabrava wrote:
on the build folder that the build script creates
run ccmake and check if the BUILD_WITH_WEBKIT is turned on
this can be a cmake cache issue.
Tomaz:
I did as you asked and the option USE_WEBENGINE (I believe that's the
one you were referring to) i
Hi Salva:
I'd like to update the user manual section on how to build smtk-import
tool, because I believe it's outdated. However, I have no clue what the
steps are to build it now. Any pointers?
Thanks in advance...
Pedro
___
subsurface mailing list
On 30-10-2017 23:19, Dirk Hohndel wrote:
You want USE_WEBENGINE=OFF
Dirk:
I've changed this option on ccmake. Still no luck. Each time a build
finishes, NO_PRINTING and NO_USERMANUAL revert back to ON...
I'll try later on with a fresh src...
Cheers:
Pedro
_
On 31-10-2017 09:52, Salvador Cuñat wrote:
I'm actually building with USE_WEBENGINE=ON, the need thing is the
recently added tag in command line e.g. build.sh -build-with-webkit.
This tag sets/unsets some cmake variables.
Salva:
That did the trick. Thank you very much for your help.
Ch
Dirk:
A small patch to update the user manual to reflect the changes necessary
to build smtk2ssfr import tool. Mostly based on the instructions
provided by Salva...
Cheers:
Pedro
>From 2ab7e644db5af6ead0461464b35ac2105002465c Mon Sep 17 00:00:00 2001
From: Pedro Neves
Date: Sat, 18
On 25-11-2017 13:10, Willem Ferguson wrote:
Any comments are highly appreciated. If these layout are perceived as
useful, I will circulate the templates so that you can test them on
your own dive log. After that we can decide in which way they will be
added to the current set of templates.
On 28-11-2017 19:23, Dirk Hohndel wrote:
I'd love to hear from more people here.
Hi all:
Although I'm not a (native) english speaker, I use the term "tank" more
often than "cylinder".
So tank +1 it is...
Cheers:
Pedro
___
subsurface mailing lis
On 30-11-2017 12:02, Martin Měřinský wrote:
Hello,
I'm working towards icons code cleanup and the possibility to create
other, nicer, scalable icons. Possibility to change icons in Subsurface
at will. And finaly usage of your current GUI icons in Subsurface,
where meaningfull.
Hi Martin:
It s
On 30-11-2017 12:21, Martin Měřinský wrote:
SVG icons are usualy "source". They can be used directly for several
icon sizes. Or, if needed, PNG icons are generated from SVG and fine-
tuned for particular size. For future changes, we want to keep the
source, so we keep both SVG and PNG (but in bet
On 13-03-2018 13:05, Dirk Hohndel wrote:
On Mar 12, 2018, at 11:49 PM, Willem Ferguson
wrote:
Subsurface-mobile 4.7.7.110 on Android 7.0 on a Galaxy S6
It is almost impossible to scroll the dive list. See screen cast at:
https://www.dropbox.com/s/adxkoxgcmtu3wyk/Scroll_issue.mp4?dl=0
I noti
Hi all:
I've just tested downloading from my Scubapro G2 using the latest master
built with libdivecomputer v0.7.0-devel-Subsurface-NG. It failed the
first time, but worked fine at the second attempt.
Now I'd like to test downloading from G2 using USB.
@ Linus: my sytem (Arch Linux) detects
On 26-04-2018 17:08, Linus Torvalds wrote:
Oh. Or just do some googling. This looks like the proper docs:
https://wiki.archlinux.org/index.php/udev
and obviously you can do better than MODE="0666" that just gives
everybody access. Some distros have a "plugdev" group that console
users get
Dirk:
I've completed the translation for pt_PT. I had to adjust a few strings,
but it was no big deal.
Hope this helps...
Cheers:
Pedro
___
subsurface mailing list
subsurface@subsurface-divelog.org
http://lists.subsurface-divelog.org/cgi-bin/mailma
On 17-07-2018 11:35, Peter Zaal wrote:
Yesterday at some point that seemed to work, because there was
actually a resource under de website project(also
announcing-subsurface-4-8-1).
I already started translating some strings in that resource, but
noticed that the resource was gone this morni
Does anyone know how we can translate the headers that are shown
together with the images on the main page (e.g.: "Multiplatform", "Log
all your dives", etc.)? The captions are on the strings on the "About"
page, mas the header are missing...
Thanks in advance:
Pedro
_
On 17-07-2018 16:19, Dirk Hohndel wrote:
I realize this is annoying, but if you just send me the five strings I
can manually fix this up.
Hi Dirk:
It's not annoying. It's just for the sake of completion ;-) Here they
go, for pt_PT:
Multiplatform: Multi-plataforma
Log all your dives: Re
On 17-07-2018 17:04, A2 wrote:
your comment is the only nazi-like thing in the whole thread... but
probably you don't realize this.
Alvaro:
How was Dick's comment "Nazi-like"? He just asked you to refrain from
using an abbreviation and explained why... You may not agree with it but
you mus
On 23-07-2018 17:32, Dirk Hohndel wrote:
This is a request for really quick and easy help from people who speak one of
our website languages (Dutch,
Finnish, French, German, Italian, Polish, Portuguese, Russian, and Spanish)...
I re-ran things against the three files currently on Transifex and
On 14/09/2018 18:40, Dirk Hohndel wrote:
I’ll pull translations today - I think I’ve seen a lot of progress
there, but I need to check if there are obvious gaps.
I started looking through the issues something like four times in the
last few days and always immediately got side-tracked.
Any
On 9/14/18 7:20 PM, Dirk Hohndel wrote:
Thanks for the reminder… I’ll push out one more time.
/D
Dirk:
2 more strings missing for translation. When right clicking on a dive:
1 - Load media from file(s)
2 - Load media from web
The first string shows up on Transifex, but I get a warning: "T
Dirk:
Yet another couple of untranslated string on the UI. The attached
screenshot is shown when editing a dive - both buttons are not translated.
Cheers:
Pedro
___
subsurface mailing list
subsurface@subsurface-divelog.org
http://lists.subsurface-d
Hi Dirk:
On 9/16/18 4:21 PM, Dirk Hohndel wrote:
Those are outside of our control, those come from Qt. I wonder,
however, why the Qt translations aren't being loaded...
The locale on my system is en_US.UTF8... Maybe that's why...
Do you have the wrong text in all dialog boxes?
Not in all
On 21/10/18 16:04, Tomaz Canabrava wrote:
Please give me your tougths on this.
Hi Tomaz:
Very nice work! I like it very much. Can't wait to test it...
Cheers:
Pedro
___
subsurface mailing list
subsurface@subsurface-divelog.org
http://lists.subsu
On 25/02/19 21:53, Linus Torvalds wrote:
On Mon, Feb 25, 2019 at 12:49 PM Berthold Stoeger
wrote:
A path is interesting - does that mean that GPS works under water?
No. GPS signals are blocked by a couple of cm of water.
There _have_ been noises about people doing gps buoys, but honestly,
th
On 14/05/19 15:47, Dirk Hohndel wrote:
So how does one trigger a switch to the "advanced" version? What if
the first time you use Subsurface, you download from a dive computer?
I'm trying to understand the logic when we show which UI...
In general, having two different UIs for different users m
Hi all:
First of, thank you Willem for the time you took to think about these
changes
On 29/07/19 07:35, Willem Ferguson wrote:
*1) Physical arrangement of data items on the tab.*
Currently the presentation of the Information tab is highly
inefficient, utilising large areas of screen spac
Hi Linux:
After 2 months without diving I've started again this week. Now my Linux
machine (Arch linux with kernel 5.3.7) does not recognize my Uwatec USB
interface (dmesg shows nothing when I plug the thing) . I've tried it on
a Windows machine and on another linux box with an older kernel (d
On 02/11/19 18:47, Linus Torvalds wrote:
So if you don't see that, something is much more broken than a missing
driver. Possibly the USB port is dead - is it perhaps using an
external hub? Does anything else work in that port?
Linus
Hi Linus:
I've managed to get it working again
On 15-10-2015 16:31, Dirk Hohndel wrote:
Side node... getting gps tracks under water is not as simple as it
sounds... but let's stay on topic...
Not that hard either (specially for shallow depths), if one is willing
to accept the associated error.
I have a few tracks myself and it would be
On 16-10-2015 13:04, Dirk Hohndel wrote:
Rathole alert.
- I want to attach a video (ok, get a screen shot)
- I want to attach a GPX track (ummm, ok, map it and store a picture of that?)
I agree with this approach. Keeps things simple.
Cheers:
Pedro
1 - 100 of 160 matches
Mail list logo