And does CARP have to be running?
I think the answer to 6 would be something like a DNS box on the ISP's
network .. or perhaps even something like www.microsoft.com ?
-Original Message-
From: Rajkumar S [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 13, 2005 9:59 AM
To:
Frimmel, Ivan (ISS South Africa) wrote:
And does CARP have to be running?
I am not having CARP in mind, as CARP and link sharing are two different things. If CARP
has to be running then this may not be what I want. Specifically I am looking at
On 10/13/05, Thomas Booms [EMAIL PROTECTED] wrote:
I want to know the packet size in bytes. I've upgraded 2 weeks ago to
version 0.85.6.
Check the MTU setting in the interface tab. It defaults to 1500 AFAIK.
--
Jeroen
-
To
Jeroen Geusebroek wrote:
On 10/13/05, Thomas Booms [EMAIL PROTECTED] wrote:
I want to know the packet size in bytes. I've upgraded 2 weeks ago to
version 0.85.6.
Check the MTU setting in the interface tab. It defaults to 1500 AFAIK.
--
Jeroen
On 10/13/05, Thomas Booms [EMAIL PROTECTED] wrote:
Why do the developers wrote this note in the last version? *Note: In/out
counters will wrap at 32bit (4 Gigabyte) !
*
I have these values currently: In/out packets 75222048/70844380 (282.08
MB/3.65 GB).
If I take a pocket calculator, i
On 10/13/05, Rajkumar S [EMAIL PROTECTED] wrote:
Hi,
I have some clarifications about the Outgoing Load Balancing mini-howto. I
assume this is
about sharing two internet links so that outbound traffic flows to both of
them.
1. visit services - load balancer
2. delete any pools
Is there any non-flash tutorial that explains how to install pfSense
on a PCEngines WRAP?
Thanks,
--
walter pelissero
http://www.pelissero.de
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL
On 10/13/05, Frimmel, Ivan (ISS South Africa) [EMAIL PROTECTED] wrote:
And does CARP have to be running?
Nothing to do with CARP :)
--Bill
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL
On 10/13/05, Rajkumar S [EMAIL PROTECTED] wrote:
Create NAT-Rules for your WAN-POOL
1. visit firewallNATOutbound
2. enable advanced outbound nat
3. check the automatically created rules.
4. create rules for all your internal networks to map to OPT interfaces..
(one rule for
On 10/12/05, Kevin Wolf [EMAIL PROTECTED] wrote:
I'm sorry, your solution actually worked. I forgot to move the new rule
above the default, so it had priority! D'oh!!!
Good to hear...I was actually about to suggest that you double check that ;)
Thank you for the help, it was much
it is possible that pfsense it integrates configurations predefined in
the installation like smoothwall or ipcop
thk
pd:anyone can speak spanish ?
--
.::Cristian Menghi::.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For
that not can importat configurations of ipcop, I want to know if can
pfsense come with configurations by defect like Ipcop
2005/10/13, Marcin Jessa [EMAIL PROTECTED]:
On Thu, 13 Oct 2005 11:23:02 -0300
Cristian Menghi [EMAIL PROTECTED] wrote:
it is possible that pfsense it integrates
Hi,
I just bought pcengine and installed with 0.70.4. I would like to upgrade
to the latest version.
I found pfSense-Wrap-Update-0.84.tgz.
This is the latest version that I can find.
After I uploaded the image file. I
got this error
This image is not digitally signed.
This means
On Thu, 13 Oct 2005 11:48:32 -0300
Cristian Menghi [EMAIL PROTECTED] wrote:
that not can importat configurations of ipcop, I want to know if can
pfsense come with configurations by defect like Ipcop
I am not sure what you mean.
What IPcop functions do you need ?
From what I know IPcop is some
No, not at this time. What's wrong with the flash tutorial?
On 10/13/05, Walter C. Pelissero [EMAIL PROTECTED] wrote:
Is there any non-flash tutorial that explains how to install pfSense
on a PCEngines WRAP?
Thanks,
--
walter pelissero
http://www.pelissero.de
On 10/13/05, Susanto Leman [EMAIL PROTECTED] wrote:
Hi,
So do you mean that 0.70.4 is unable to upgrade to later version.
Yes.
Which image is that ? May I know the url ? I only found one image for WRAP.
Thanks
Hi,
Thanks for your reply. The image is with embedded. Because according to
the tutorial in flash, the image should be with wrap.
Will it work with my wrap box ? just need to confirm.
;-)
-santo-
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Thursday, October
Yes, it works with all embedded devices.
On 10/13/05, Susanto Leman [EMAIL PROTECTED] wrote:
Hi,
Thanks for your reply. The image is with embedded. Because according to
the tutorial in flash, the image should be with wrap.
Will it work with my wrap box ? just need to confirm.
;-)
-santo-
Hi,
Thank you ver much
Regards
Santo
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 13, 2005 11:16 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] RE: Wrap upgrading from 0.70.4 to latest
version
Yes, it works with all embedded
On 10/13/05, Susanto Leman [EMAIL PROTECTED] wrote:
Hi,
Thanks for your reply. The image is with embedded. Because according to
the tutorial in flash, the image should be with wrap.
Will it work with my wrap box ? just need to confirm.
;-)
-santo-
The tutorial is probably a hair out of date
Hi
All
My cable ISP allows
me to obtain up to 5 IP addresses via DHCP (nope, no static addresses here, they
cost a fortune). For the sake of having more control over NAT and port mappings,
I'd like to be able to use more than the single IP address obtained by pfSense
out of the box.
On 10/13/05, Thomas [EMAIL PROTECTED] wrote:
My cable ISP allows me to obtain up to 5 IP addresses via DHCP (nope, no
static addresses here, they cost a fortune). For the sake of having more
control over NAT and port mappings, I'd like to be able to use more than the
single IP address obtained
Just a general question.
Would like to know if people think that this would work.
Internet
real
|
Datacentre
(IPSECEND)
|
|
|-- |
| |
| |
| |
Internet
1
internet2
| |
On 10/13/05, alan walters [EMAIL PROTECTED] wrote:
Just a general question.
Would like to know if people think that this would work.
Internet real
|
Datacentre (IPSECEND)
Cool you guys are great. This solves a long running problem. Time to get
testing I guess. thanks
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: 13 October 2005 22:05
To: support@pfsense.com
Subject: Re: [pfSense Support] failover ipsec
On 10/13/05, alan
Didn't dare try this yet, as I was looking for a way to request multiple
leases using different MAC addresses (coming from the Wintel world, I've yet
so see a DHCP server that issues more than one lease for the same MAC). If
you can point me in the right direction (the archives you looked at
Do this from the shell:
update_file.sh /etc/sysctl.conf
Then reboot.
Scott
On 10/13/05, John Cianfarani [EMAIL PROTECTED] wrote:
Hey all,
Posted this before but it's happened again with the version: 84.6
Will try to upgrade it this week and report if it happens again.
Has been
Hi,
I am having problem for remote user to register my asterisk.
Initially, It was working fine. I read from the support email. Someone
installed siproxd.
And its working. How to install on my wrap ? using shell to
install ? I notice that the feature Install Package is removed
from my
Sorry did an upgrade already to 86.4 since I wanted to try to add some
other packages. Will let you know if it comes back.
John
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 13, 2005 9:14 PM
To: support@pfsense.com
Subject: Re: [pfSense
Is there a way to resize/expand the size of partition used
on the wrap? I have a 512 Meg card and Id like to try to add some other
packages onto it like perl and nagios plugins to monitor but with only 14meg
free its kinda tough.
Ive tried putting in a machine with a few different
Also, in addition to John's great suggestions if this still doesn't
work, try sipproxd in the packages section (if you are not running on
a embedded platform).
Scott
On 10/13/05, John Cianfarani [EMAIL PROTECTED] wrote:
What protocol SIP or IAX?
If it's IAX (recommended for clients
Use the LiveCD with http://wiki.pfsense.com/wikka.php?wakka=FlashHowTo
to resize.
Scott
On 10/13/05, John Cianfarani [EMAIL PROTECTED] wrote:
Is there a way to resize/expand the size of partition used on the wrap? I
have a 512 Meg card and I'd like to try to add some other packages onto it
Should have looked there first. Will try that now.
Thanks
John
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 13, 2005 9:54 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] Resize Wrap image
Use the LiveCD with
33 matches
Mail list logo