sswindon wrote:
> I seem to be able to connect fine using LMS and iPeng without going
> through Spotify Connect. Thanks for the clarification, I hadn't
> realised that there were issues with Spotty and Spotify Connect, in fact
> I assumed Spotty was designed to work with SC. I eventually got
garym wrote:
> Do you have issues if you don't use SpotifyConnect? I use Spotty, but
> not Connect and have no issues. @mherger, the developer of this plugin
> has said many times on this forum that the "SpotifyConnect" function
> doesn't work very well.
I seem to be able to connect fine
Do you have issues if you don't use SpotifyConnect? I use Spotty, but
not Connect and have no issues. Michael, the developer of this plugin
has said many times on this forum that the "SpotifyConnect" function
doesn't work very well.
*Home:* Pi4B-8GB/pCP8.3.x/4TB>LMS 8.2.x>Transporter,
I have been running Spotty for a few days without an issue. Just
returned from a few days away and connected my MacBook and started LMS.
All was working find and then the music stopped and I can't use Spotify
Connect from within the Spotify app. I can use Spotify from LMS on my
phone and
Thanks. Please see my edited response above. I tried to do this but it
didn't work until I rebooted my MacBook.
But did you add the new version to the firewall after the re-install?
FYI the latest version I have
is dated June 2022, is this the correct latest version?
Yes, that's the
mherger wrote:
> > I tried deleting the Spotty entry in the firewall settings but can't
> see
> > where the latest Spotty executable is located. I tried restarting
> LMS
> > but am having the same issue. Can you please help? Thanks
>
> You can find the path in the Spotty settings, or its
I tried deleting the Spotty entry in the firewall settings but can't see
where the latest Spotty executable is located. I tried restarting LMS
but am having the same issue. Can you please help? Thanks
You can find the path in the Spotty settings, or its folder on
Settings/Information.
mherger wrote:
> > Do you mean I need to remove the existing Spotty entry in the
> firewall
> > settings and reinstall it? Can you please clarify.
>
> You can select a binary for which you want to define a rule (there's the
>
> little "+" button at the bottom). Use it to pick the latest
Do you mean I need to remove the existing Spotty entry in the firewall
settings and reinstall it? Can you please clarify.
You can select a binary for which you want to define a rule (there's the
little "+" button at the bottom). Use it to pick the latest spotty
executable.
mherger wrote:
> > the Spotify app on Macbook or iPhpne. While LMS is running I get
> > requests popping up every minute or so to allow Spotty to receive
> > incoming connections. I have checked my Firewall settings and Spotty
> is
> > enabled. iPeng can access Spotify on SBT whilst this is
the Spotify app on Macbook or iPhpne. While LMS is running I get
requests popping up every minute or so to allow Spotty to receive
incoming connections. I have checked my Firewall settings and Spotty is
enabled. iPeng can access Spotify on SBT whilst this is happening. The
You might need to
I seem to have another issue that I can't resolve. When I haven't used
the SBT for a while I can no longer see SBT in Spotify Connect within
the Spotify app on Macbook or iPhpne. While LMS is running I get
requests popping up every minute or so to allow Spotty to receive
incoming connections.
sswindon wrote:
> I can't promise this will be the last of my stupid questions but I am
> now very much enjoying listening to my SBT.
This community is friendly and is willing to help the newbie as well as
the squeezebox pro. Sometimes the jargon of terms on the forum can take
a while to
After a factory reset and reinstalling Spotty things seems to be working
well. I think the issue was MSB not recognising iPeng when I switched
to it which caused iPeng to have fit. I now realise from responses
above that I don't need to use MSB and have removed it from iPeng
options. Also
Can you please let me know what you mean by uninstall, what should I
uninstall?
I'm sorry for being vague... uninstall Spotty, as it was causing
additional issues.
___
Touch mailing list
Touch@lists.slimdevices.com
sswindon wrote:
> Thanks, very useful. Can you please let me know how I install Material
> Skin.
It's a plugin - LMS > Settings > plugins > 3rd party plugins.
*Server - LMS 8.3.0 *RPi4B 4GB/NanoSound ONE case/pCP 8.1.0 - 75K
library, playlists & LMS cache on Sata SSD (ntfs)
*Lounge* -
P Nelson wrote:
> To expand on Gary's comments.
>
> The squeezebox device needs a server, which can be MySB.com OR LMS
> running on a local computer. (Sorry if you already know this, but you
> made a comment that mySB was running on your mac.) After a factory
> reset, the Touch will likely
mherger wrote:
> > the direction of the iPeng app being the issue. When I switch from
> > MySqueezeBox to MacBook Pro as the music source in iPeng, MSB no
> longer
> > recognises the SBT but LMS does. I then get persistent requests to
> > allow Spotty to accept incoming connections which don't
garym wrote:
> it is correct that a touch can only be connected to mySqueezebox.com OR
> LMS. not both at same time. mysb.com is essentially LMS in the cloud.
> On the touch menu select my music and it should ask to connect to any
> LMS on your network.
To expand on Gary's comments.
The
sswindon wrote:
> Thanks for the responses. My set up is very simple, one network, LMS and
> MSB running on Apple Macbook Pro M1 (Monterey). All configurations seem
> to be correct as far as I can see and I have managed to update the SBT
> to the latest firmware 7.8.0. Further tinkering would
the direction of the iPeng app being the issue. When I switch from
MySqueezeBox to MacBook Pro as the music source in iPeng, MSB no longer
recognises the SBT but LMS does. I then get persistent requests to
allow Spotty to accept incoming connections which don't stop until I
stop LMS. I don't
mherger wrote:
> > Apologies of this has been covered elsewhere but my Squeezebox Touch
> is
> > connected to MSB but will not connect to LMS. I have restarted both
> but
> > still not connecting. LMS version is 8.3.1.
> Where is LMS running? Same network? Docker?
LMS is running on MacBook
I didn't think a factory reset would downgrade the firmware either. That
must have come from mysqueezebox.com.
Sent from my Pixel 3a using Tapatalk
slartibartfast's Profile:
Thanks for the responses. My set up is very simple, one network, LMS and
MSB running on Apple Macbook Pro M1 (Monterey). All configurations seem
to be correct as far as I can see and I have managed to update the SBT
to the latest firmware 7.8.0. Further tinkering would seem to point in
the
No, not flakey at all. Rock solid and usually just works. But something
is causing you problems. Are you sure the touch and LMS are on same
network and subnet, etc.
*Home:* Pi4B-8GB/pCP8.3.x/4TB>LMS 8.2.x>Transporter, Touch, Boom, Radio
(all ethernet)
*Cottage:* rPi4B-4GB/pCP8.x/4TB>LMS
It's not clear to me if the OP is just expecting the Touch to switch
automatically to the LMS server of if they used the Touch menu to select
the LMS server. It should connect straightaway if you've selected an LMS
server (check it's running properly, e.g. by looking at it via a web
browser). If
Apologies of this has been covered elsewhere but my Squeezebox Touch is
connected to MSB but will not connect to LMS. I have restarted both but
still not connecting. LMS version is 8.3.1.
Where is LMS running? Same network? Docker?
___
Touch mailing
Apologies of this has been covered elsewhere but my Squeezebox Touch is
connected to MSB but will not connect to LMS. I have restarted both but
still not connecting. LMS version is 8.3.1. Firmware on SBT is 7.7.3,
it was previously 7.8.0 but I did a factory reset and now it won't
prompt me to
paul webster wrote:
> which country are you in?
> (just in case you are outside usa and pandora just realised)
usa
dd564's Profile: http://forums.slimdevices.com/member.php?userid=73175
View this thread:
Which country are you in?
(just in case you are outside USA and Pandora just realised)
Paul Webster
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, abc
australia and cbc/radio-canada
and, via the extra \"radio
Hello,
I'm a newbie to this forum, but down to my last ditch effort to save my
Squeezebox. My wife uses it to play Pandora and it quit working a few
weeks back.
I have LMS running on a home PC that it connects to.
I've tried trouble shooting from reading other posts and I'm able to lay
https
My new set up has a wifi router (6/Mesh), a TV box wirelessly connected
to the router with both HDMI and Ethernet out, and a wifi extender with
Ethernet out too.
I can only get my Touches and Radios to work if they are connected
directly by LAN to the core router.. I'm still
GRC wrote:
> Just posted in "General Discussion" because I have a possibly similar
> problem after installing a mesh system. Difficulty for me to hard-wire
> a Touch to a secondary mesh outer without moving them all around. Any
> other ideas?
Another possibility is to buy WiFi extender and
Just posted in "General Discussion" because I have a possibly similar
problem after installing a mesh system. Difficulty for me to hard-wire
a Touch to a secondary mesh outer without moving them all around. Any
other ideas?
-Seen it all, done it all, can't remember most of it ...-
Server =
Hi
(also posted on unifi networking forums)
Long term Squeezebox and unifi networking user. No issues with
squeezebox touch connecting to my normal unifi access points (ac-pro).
Recently added an additional unifi nanoHD access point. All other
clients 'close' clients connect to it. However my
bpa wrote:
> If another Touch (with same f/w) works OK in exact same place, then
> issue is h/w or PSU. Have you tried swapping PSU of "bad" Touch with
> "good" Touch. With both Touch's in same place does problem follow the
> PSU ?See first post. Swapping PSU made no difference [emoji17]
Nomen Nescio wrote:
> Compal modem; TP-Link AP Archer C1200; TP-Link EAP225-Outdoor
>
> Other Touch has no problem at same place on WiFi.
If another Touch (with same f/w) works OK in exact same place, then
issue is h/w or PSU. Have you tried swapping PSU of "bad" Touch with
"good" Touch.
bpa wrote:
> This sounds like incompatibility with Wifi or else wifi module is
> failing.
> What is you wifi setup - make model or wifi router/APs/extenders/mesh
>
Compal modem; TP-Link AP Archer C1200; TP-Link EAP225-Outdoor
Other Touch has no problem at same place on WiFi.
LMS 8.2
Nomen Nescio wrote:
> reset by little button done: no result.
> It plays (for the last hour) on ethernet. The Touch freezes and reboots
> on WiFi
>
> Cleaned PSU contact before reset with 'contact cleaner'.
This sounds like incompatibility with Wifi or else wifi module is
failing.
What is
Heuer wrote:
> Try a full Factory reset: Hold reset button down, connect to power and
> continue to hold until you get a confirmation message on the screen.
>
> Does it work on Ethernet?
reset by little button done: no result.
It plays (for the last hour) on ethernet. The Touch freezes and
Try a full Factory reset: Hold reset button down, connect to power and
continue to hold until you get a confirmation message on the screen.
Does it work on Ethernet?
Lounge: Transporter>Audio Synthesis DAX Decade>Audio Research LS22>Krell
FPB300>Wilson Benesch Act 1's + 2 x Velodyne SPL1000
I just got a second hand Touch when connected or trying to connect to a
wireless network the Touch can not finish the bootsequence and reboots.
If connected and playing a spotify song the Touch reboots on skipping to
the next song or just during playback. Most of the time it won't boot
that far.
Zombie wrote:
> Did you level match them, too? That's important.Of course!
my wife also heard a difference
thekiller's Profile: http://forums.slimdevices.com/member.php?userid=67754
View this thread:
thekiller wrote:
> yes i have compared the touch to the dac32. i think the dac sound
> better. I have synchronized both devices, allowing me to continue to use
> the touch controls and display
Did you level match them, too? That's important.
thekiller wrote:
> yes i have compared the touch to the dac32. i think the dac sound
> better. I have synchronized both devices, allowing me to continue to use
> the touch controls and display
Do you prefer a streamer with screen to one controlled only by
phone/tablet? At least you have a few
Patricia P wrote:
> The dac32 does hi res without any modding necessary and only one box not
> two. But aa long as the Touch works I will hold on. Have you compared
> the two?yes i have compared the touch to the dac32. i think the dac sound
better. I have synchronized both devices, allowing me
thekiller wrote:
> Yes, thank you. I never heard of your dac, but this looks good
The dac32 does hi res without any modding necessary and only one box not
two. But aa long as the Touch works I will hold on. Have you compared
the two?
SB Touch (Community firmware v8.01) UE Radio, CA
Patricia P wrote:
> Yes that's the one. What a name for a very simple box dac! The DAC is
> powered by the Touch. You need a microusb to USB A cable.
>
> I connect the microusb port labelled "in 1/power" to the USB A port of
> the Touch.
> The Advanced Settings menu has Digital options.
Yes that's the one. What a name for a very simple box dac! The DAC is
powered by the Touch. You need a microusb to USB A cable.
I connect the microusb port labelled "in 1/power" to the USB A port of
the Touch.
The Advanced Settings menu has Digital options. Choose SMSL Dac.
It will reboot
Patricia P wrote:
> I am really enjoying the dac with Squeezebox Touch with edo. I am
> getting 192khz from my aged streaming device. Every CD rip sounds good,
> and now I am able to play my few hi res downloads.
>
> I first tried to get the squeezebox to recognise the dac when I used
>
I am really enjoying the dac with Squeezebox Touch with edo. I am
getting 192khz from my aged streaming device. Every CD rip sounds good,
and now I am able to play my few hi res downloads.
I first tried to get the squeezebox to recognise the dac when I used
separate data and power cables but
hulm1 wrote:
> Hi
>
> I have been having a persistent problem for which I could really use
> some help. I have the following setup: A Raspberry Pi 2, Max2Play with
> LMS installed and Spotty plug in, Synology 218+ NAS and Squeezebox Touch
> (as the player). When working, all is wonderful. I
Hi
I have been having a persistent problem for which I could really use
some help. I have the following setup: A Raspberry Pi 2, Max2Play with
LMS installed and Spotty plug in, Synology 218+ NAS and Squeezebox Touch
(as the player). When working, all is wonderful. I run it one of two
ways:
Man in a van wrote:
> I just did a search for
>
> Logitech Squeezebox touch M/N C-RH62
>
> and I think it's a "Classic"
>
> ronnie
You are right. Hopefully the seller will take it back once it arrives.
Not what I wanted.
Cheers
I just did a search for
Logitech Squeezebox touch M/N C-RH62
and I think it's a "Classic"
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
Looks like the model numbers are different. The 3 amp model is M/N:
X-RC4 and the 2 amp version is M/N C-RH62. Does anyone know the
difference?
robingl's Profile: http://forums.slimdevices.com/member.php?userid=71454
View
I have purchased a second Touch, used of course, and I notice that it is
billed as 5VDC - 2A whereas my existing Touch is billed as 5VDC - 3A.
Does anyone know the difference, early model, late model? Differences in
performance.
Cheers
Wow! The firmware update did the trick! Thank you so much!
Really weird why it happened though that I had to update the firmware.
We didn't have any power interruption that may have caused this issue.
Thanks again for the help!
chiz wrote:
> I can no longer see that option. After hitting "Continue" after
> selecting English as the language, I'm immediately shown the error
> message about not able to detect a wired connection.
I don't know why your wi-fi option is not showing, but I think I know
why you are in an
I can no longer see that option. After hitting "Continue" after
selecting English as the language, I'm immediately shown the error
message about not able to detect a wired connection.
chiz's Profile:
Do you still have the option to manually enter your SSID and password?
Apesbrain's Profile: http://forums.slimdevices.com/member.php?userid=738
View this thread: http://forums.slimdevices.com/showthread.php?t=113576
Happy New Year everyone!
Been a while not posting in this forum until today :(
I have an SB Touch connected via wifi to a LMS running on a NAS. I
noticed today that it's not showing the clock screensaver but instead
just a black screen. So I turned it on and noticed immediately that it's
not
Glad I found this thread after running my SBT into the same
Verify Ethernet Connection loop, so thanks for the
solution provided here.
My Wifi is dead, too (hardly ever used it). There seem to be other side
effects, my SBT refused to connect to a new server or mysb, thats
where my troubles
I've been using my Squeezebox Touch for 10 years now and I'm still blown
away with what it can handle and the quality of the sound it delivers.
For some months now though I've been experiencing lots of problems
keeping it connected to other servers and players around the house. I'm
adding fuller
Thanks mrw! I've just ordered one on eBay. Fingers crossed!
GB_Joe's Profile: http://forums.slimdevices.com/member.php?userid=21466
View this thread: http://forums.slimdevices.com/showthread.php?t=112287
GB_Joe wrote:
> Are there any simple ethernet-to-wifi gizmos which might give it a new
> lease of life
Search the forum for "Vonets". There have been a number of posts
describing one or more such gizmos under this brand that have apparently
been successfully used.
SqueezedUser wrote:
>
> On the problematic SBT we have:
> > >
- all Wlan signal information fields are blank in the menu
> "Settings/Advanced/Diagnostic/Wireless"
- trying to manually firing up Wlan on the terminal gives an error
> (i.e., # ifconfig wlan0 up => ifconfig:
d6jg wrote:
> If you are sending FLAC to an SBT via BubbleuPnP then presumably you are
> actually sending PCM to the SBT.
>
> Have you tried setting LMS to send PCM instead of FLAC ?
Hi d6jg
My apologies for taking so long to reply. It has been a challenge being
unfurloughed after four
If you are sending FLAC to an SBT via BubbleuPnP then presumably you are
actually sending PCM to the SBT.
Have you tried setting LMS to send PCM instead of FLAC ?
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s
*Office* - Pi3+Sreen ->
Hi All,
I wanted to write an update which is as follows -
I tried SPDIF from the SBT to the Chord Mojo and Bryston pre DACs , this
improved the SQ marginally but the HF's were still mostly as before
tizzy and the whole sound lacking weight.
Reading other forums I came across a post in diyAudio
With Installation of LMS Version 8.0.0-1594451286 and Restarting of
Squeezebox Touch the problem is solved. Just for information who had the
same issue.
Tapaballou's Profile:
slartibartfast wrote:
> The Touch wasn't introduced until 2010.Your old posts talk about an
> SB3.
>
> Sent from my Pixel 3a using Tapatalk
My error, thank you for pointing this out. I have both SB3 and SBT but I
am only using the SBT as no USB EDO available on SB3.
I will try SPDIF coax.
Barry.B wrote:
> Hi all,
>
> Hope everyone is safe and well!!
>
> I bought my SBT in 2007 and I spent some time trying to make it work for
> me. I was using Mediamonkey to rip CD's and LMS to stream to the SBT
> from my Asus gaming laptop via wifi.
> My system is a Meridian G08 CD player
Barry.B wrote:
> SBT USB Any suggestions, thoughts to how I can improve the SBT
> sound quality
Coax SPDIF instead of USB.
Touch --> Benchmark DAC3 HGC --> Counterpoint NPS200 MkII + NPS400 -->
Meadowlark Heron
Touch --> Schiit Bifrost 2 --> Eddie Current Aficionado --> HD800 SDR,
ZMF
Hi all,
Hope everyone is safe and well!!
I bought my SBT in 2007 and I spent some time trying to make it work for
me. I was using Mediamonkey to rip CD's and LMS to stream to the SBT
from my Asus gaming laptop via wifi.
My system is a Meridian G08 CD player connected by XLR cables to Bryston
I have updated LMS to Version: 8.0.0 - 1593258969 @ Sat Jun 27 14:24:42
CEST 2020 and since that there are some icons for apps like Deezer,
TuneIN Radioo, Podcasts in the app menue missing.
Restarting the Squeezebox does not help. In my apps like Material Skin,
ipeng everything is fine. Where
mrw wrote:
> There were seven changes that impacted networking set up. I have not
> been following the thread, so I don't know which might be a likely
> candidate. Here's a list of the changes, should someone wish to review.
> The last one looks intriguing, it seems that it might disable
mherger wrote:
> https://github.com/Logitech/squeezeplay/tree/public/7.8/src
>
> ^ that's where you'd find the code. But... where in there?
>
There were seven changes that impacted networking set up. I have not
been following the thread, so I don't know which might be a likely
candidate.
- Where in the code? The last observation shows the problem appearing
after the Ethernet checking (which is fine but this is not advertised
as such and not exited on) immediately followed by a Wlan check (which
seems to be defective here and this hangs that SBT).
That's a good question
Hello Michael
Great, isn't it. I finally had to upgrade to FW version 7.8.0 r16754
after connecting it to my LMS-Server (the latter left no choice). So
now, it is running again and both SBTs have the very same release.
Furthermore, I did some comparative tests between the 2 SBTs in the
Meaning that the SBT is back, running (although with an quite older
release).
Wow... that's quite a finding. Which means that the latest firmware
would not be able to set up a device from scratch?
What would be interesting now is what happens if you update to the
latest firmware. Would it
Hello,
Just *SOLVED* the SBT *endless "Verify Ethernet connection" looping
screen* appearing after having reset a wired SBT (*FW 7.8.0 r16754*) the
following way:
- copy the file
http://update.slimdevices.com/update/firmware/7.7.3/fab4_7.7.3_r16676.bin
to a FAT-formatted (old) SD-Card
Hello Paul
Perhaps. Please find both dmesg files in attachment. Is there any other
means of getting further HW-status information - there is only one and
the same module loaded in both SBTs: "sd8686", nothing about
wlan-specific HW?
Kind regards
Pierre
Paul Webster wrote:
> Sounds like a
Sounds like a broken or unseated WiFi card ... I did not spot anything
in your earlier dmesg dump referring to it - although it would be good
to see a dmesg log from a Touch that has one working.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france
Hello Michael,
Following http://wiki.slimdevices.com/index.php/SqueezeOSNetworking, I
tried the following:
- Remove Ethernet cable
- Perform Factory Reset (via fab4 button)
- Upon Language Screen appearing, choose English => beep => nothing
else happens (Language Screen remains)
-
On this SBT, trying to start the connection on the command line (no home
screen!) just gives:
Can't you do another factory reset with the ethernet cable unplugged,
then try to configure it as WLAN?
=> Is there really no way to restore an older firmware via the
ssh-connection? The problem
On this SBT, trying to start the connection on the command line (no home
screen!) just gives:
# ifconfig wlan0 up
ifconfig: SIOCGIFFLAGS: No such device
On my other SBT, this command works perfectly well however...
=> Is there really no way to restore an older firmware via the
ssh-connection?
Jan 1 01:07:17 squeezeplay: ERROR squeezeplay.task - Task.lua:75 task
error halfDuplexBugVerification:
...ve/applets/SetupNetworking/SetupNetworkingApplet.lua:378: attempt to index
local 'iface' (a nil value)
This part sounds like a bug in Squeezeplay. Or at least unwanted
behaviour
Some bits from the files
dmesg (looks OK to me - but would need comparison with another ethernet
connected Touch to see if more usually comes out)
Code:
eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
eth0: status: link down.
eth0: status: link
Hello Michael
I have enclosed 2 versions of the /var/log/messages with the SD-Card
removed,
- the first: after power on and before choosing the language
- the second: after having chosen the language and after some time it
remains endlessly saying "Verify Ethernet Connection"
You
Many thanks for your instructions. Formerly, I just transferred the
messages logfile with the SD-card (did a clean shutdown before removal).
Now I could set up the SSH connection with your instructions below (BTW.
you have to add the parameters "-o
KexAlgorithms=+diffie-hellman-group1-sha1 -c
Hello Mike
One more comment: following addresses do get resolved without any
problem:
# nslookup fab4.squeezenetwork.com
Server:192.168.1.1
Address 1: 192.168.1.1 internetbox.home
Name: fab4.squeezenetwork.com
Address 1: 52.51.150.149
ec2-52-51-150-149.eu-west-1.compute.amazonaws.com
Hello Michael
Many thanks for your instructions. Formerly, I just transferred the
messages logfile with the SD-card (did a clean shutdown before removal).
Now I could set up the SSH connection with your instructions below (BTW.
you have to add the parameters "-o
Not directly IP related. But anything interesting in /var/log/messages,
in particular towards the end of the file?
Yes there is maybe something wrong there, after loading the plugins and
starting the network polling (see extract at the end).
I have no idea how you copied that log snippet, but
Hi Michael
Again, many thanks for your support. Please find my answers below.
Kind regards
mherger wrote:
> > I updated my post in the meantime. Here is the delta-information.
>
>
> I'm known not to see edits, as I follow the forum via mailing list...
>
> > I did a DNS-check with
I updated my post in the meantime. Here is the delta-information.
I'm known not to see edits, as I follow the forum via mailing list...
I did a DNS-check with "nslookup www.tsr.ch" which perfectly works.
As would "ping www.google.com", I guess?
Finally doing an "nslookup mysqueezebox.com"
mherger wrote:
> > Many thanks. In the SBT, I never made changes to the IP settings
> > (IP-address, DNS, default GW all over DHCP). In the router , I tried
> the
> > following (Default GW is always the address of the router itself):
>
> Would you even get a prompt to manually configure the IP
Many thanks. In the SBT, I never made changes to the IP settings
(IP-address, DNS, default GW all over DHCP). In the router , I tried the
following (Default GW is always the address of the router itself):
Would you even get a prompt to manually configure the IP settings on the
touch?
- DHCP
mherger wrote:
> > => Is there any way to get over this endless Ethernet Connection
>
> I'm pretty sure there is. But don't know yet how.
>
> Could you please double-check that the IP configuration sent to your
> DHCP clients would be correct? In particular DNS and gateway settings
> are
=> Is there any way to get over this endless Ethernet Connection
I'm pretty sure there is. But don't know yet how.
Could you please double-check that the IP configuration sent to your
DHCP clients would be correct? In particular DNS and gateway settings
are obviously crucial.
Did you try
1 - 100 of 901 matches
Mail list logo
