[Bug 304388] Re: Gratuitous file /etc/samba/gdbcommands
I spent a lot of time investigating this, and would have avoided that if it had been documented. I'd still like to request the addition of a small snippet to README.Debian but since I'm an Ubuntu user I didn't want to take this directly upstream. If I submit this upstream, with a small patch, can I change this to confirmed wishlist? -- Gratuitous file /etc/samba/gdbcommands https://bugs.launchpad.net/bugs/304388 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint improved-power-management] Improved Power Management
Blueprint changed by Arnaud Quette: Whiteboard changed to: * Powerman - PDU support (http://powerman.sourceforge.net/): - Debian ITP (done) - Debian package upload (mostly done, upload underway) - Ubuntu sync (https://bugs.edge.launchpad.net/ubuntu/+bug/315637, waiting) * Network UPS Tools - NUT: - DeviceKit-power integration (postponed for 2.4.1) - dummy-ups repeater mode (communication link redundancy and forwarding) (done, trunk) - base PDU support (~6 SNMP units) (done, trunk) - extended PDU support, through libpowerman (~ 20 units) (done, trunk) - configuration improvements: provide some library / backend to develop a config wizard (python and/or debconf). configuration is definitely NUT's weakest point, apart from the HAL/DK-p backends! (postponed for 2.6 ; work started on Augeas lens) - sub devices (present UPS' outlets as devices, to allow per outlet subscription and management) (postponed for 2.4.1 or 2.6) - virtual devices (composite devices, made of several UPSs (parallel, serial or sequential redundancy modes) and/or PDUs) (postponed) * http://www.codon.org.uk/~mjg59/power/good_practices.html -- Improved Power Management https://blueprints.edge.launchpad.net/ubuntu/+spec/improved-power-management -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 303458] Re: segfault in pam_smbpass.so
Should this be merged with #302092? -- segfault in pam_smbpass.so https://bugs.launchpad.net/bugs/303458 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 317734] [NEW] mysql initscript fails
You have been subscribed to a public bug: On a system with many databases and/or large dataset initscript exits with fail! even though the database is still starting up. Sometimes this can be ignored, but it appears it is hosing an upgrade, as it keeps returning to this set of tasks... Errors were encountered while processing: mysql-server-5.0 E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up mysql-server-5.0 (5.0.51a-3ubuntu5.4) ... * Stopping MySQL database server mysqld ...done. * Starting MySQL database server mysqld ...fail! invoke-rc.d: initscript mysql, action start failed. ** Affects: launchpad Importance: Undecided Status: Invalid ** Affects: mysql-dfsg-5.0 (Ubuntu) Importance: Undecided Status: New -- mysql initscript fails https://bugs.launchpad.net/bugs/317734 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-dfsg-5.0 in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 305393] Re: Please upgrade php5 to new upstream version 5.2.8
My apologies if this is not the appropriate place to ask, but how can I upgrade to php 5.2.8 with apt-get if I have 5.2.6 installed? I am new to the deb package system and am being impacted by a bug in 5.2.6. I have added Ari's two URL's to my sources.list, but I have been unsuccessful figuring out the upgrade procedure. Any help would be appreciated. Thanks! -- Please upgrade php5 to new upstream version 5.2.8 https://bugs.launchpad.net/bugs/305393 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to php5 in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 317784] [NEW] network manager loses preferred networks up upgrade from hardy to intrepid
Public bug reported: Binary package hint: network-manager 1.) lsb_release -rd Description:Ubuntu 8.10 Release:8.10 2.) apt-cache policy network-manager network-manager: Installed: 0.7~~svn20081018t105859-0ubuntu1.8.10.1 Candidate: 0.7~~svn20081018t105859-0ubuntu1.8.10.1 Version table: *** 0.7~~svn20081018t105859-0ubuntu1.8.10.1 0 500 http://ftp.ussg.indiana.edu intrepid-updates/main Packages 100 /var/lib/dpkg/status 0.7~~svn20081018t105859-0ubuntu1 0 500 http://ftp.ussg.indiana.edu intrepid/main Packages 3.) While my system was running Hardy, I had a number of preferred networks/ssids that network-manager would automatically connect to if they were detected, and would prompt me for the password to unlock the saved WEP/WPA/etc passwords/keys if necessary. Upon upgrading to Intrepid, network-manager seems to have lost the list of preferred networks. Using gconf editor, I can see that the version of network- manager in Hardy stored its configuration information in /system/networking/wireless/networks/ssid. In the Intrepid version, network-manager appears to store this data in /system/networking/connections/n/ where n appears to increase as the number of networks I connect to increase. My expectation upon upgrading to Intrepid is that network-manager would continue to use the list of preferred networks/ssids that were established in Hardy. 4.) I have to re-associate with the preferred networks, which sometimes requires re-inputting previously saved WEP/WPA/etc passwords/keys. In some cases, this is quite annoying as I've, frankly, forgotten what the passwords are. ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 8.10 Package: network-manager 0.7~~svn20081018t105859-0ubuntu1.8.10.1 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games:/home/username/local/bin:/home/username/bin LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: network-manager Syslog: Error: command ['egrep', ' (NetworkManager|dhclient|kernel):', '/var/log/syslog'] failed with exit code 1: Uname: Linux 2.6.27-9-generic i686 WpaSupplicantLog: CTRL-EVENT-SCAN-RESULTS CTRL-EVENT-SCAN-RESULTS CTRL-EVENT-SCAN-RESULTS CTRL-EVENT-SCAN-RESULTS CTRL-EVENT-SCAN-RESULTS ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- network manager loses preferred networks up upgrade from hardy to intrepid https://bugs.launchpad.net/bugs/317784 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317784] Re: network manager loses preferred networks up upgrade from hardy to intrepid
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/21258823/Dependencies.txt ** Attachment added: Gconf.txt http://launchpadlibrarian.net/21258824/Gconf.txt ** Attachment added: IfupdownConfig.txt http://launchpadlibrarian.net/21258825/IfupdownConfig.txt ** Attachment added: NetDevice.eth0.txt http://launchpadlibrarian.net/21258826/NetDevice.eth0.txt ** Attachment added: NetDevice.eth1.txt http://launchpadlibrarian.net/21258827/NetDevice.eth1.txt ** Attachment added: NetDevice.wmaster0.txt http://launchpadlibrarian.net/21258828/NetDevice.wmaster0.txt ** Attachment removed: Gconf.txt http://launchpadlibrarian.net/21258824/Gconf.txt -- network manager loses preferred networks up upgrade from hardy to intrepid https://bugs.launchpad.net/bugs/317784 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317784] Re: network manager loses preferred networks up upgrade from hardy to intrepid
I deleted Gconf.txt as it contained some mildly sensitive information (and ubuntu-bug nor the web interface mentioned it would be attached, nor gave me the opportunity to remove sensitive information before it was submitted). I will be happy to provide a sanitized version if requested. -- network manager loses preferred networks up upgrade from hardy to intrepid https://bugs.launchpad.net/bugs/317784 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 314600] Re: fglrx versions newer than 8.543 cause system hang and panic
Sure can do. ** Attachment added: 8530w-ati-lspci-nnvv.log http://launchpadlibrarian.net/21258958/8530w-ati-lspci-nnvv.log -- fglrx versions newer than 8.543 cause system hang and panic https://bugs.launchpad.net/bugs/314600 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 310575] Re: A3 pdf file is cropped and printed on A4 paper
A combined printjob does also NOT print properly: lpr -P xerox1 -o PageSize=A4 A4quer.pdf -o PageSize=A3 A3portrait.pdf -o PageSize=A4 quer7232.pdf The last option wins. That is not the expected behavior. -- A3 pdf file is cropped and printed on A4 paper https://bugs.launchpad.net/bugs/310575 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 310575] Re: A3 pdf file is cropped and printed on A4 paper
A document which contains a combination of A4,A3,A4 pages prints completely on A4 paper, the A3 page cropped. This is not good. -- A3 pdf file is cropped and printed on A4 paper https://bugs.launchpad.net/bugs/310575 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 252094] Re: [i965, etc.] Poor graphics performance on Intel
Wow! Luciano: That is backports for Jaunty 9.04or just plain Ibex 8.10? (I guess you need a 2.6.28 kernel anyway) What it your chipset? I wonder if my eee 901 with Intel GME 945 will benefit from this improvement also. Still 700FPS is less than half the 1500FPS this driver achieved in the good old TTM days, so I wonder how it is GEM an improvement or if there are still many performance gains to come. -- [i965, etc.] Poor graphics performance on Intel https://bugs.launchpad.net/bugs/252094 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 220345] Re: kernel 2.6.24-16-generic + radeon driver = system freezes
I have a Travelmate 4002WLMi and after an installation of Intrepid with the alternate installer (because I didn't know about the usb mouse !!!) adding nohz=off solve the freezing issue ... Although I didn't install the ati driver (I think) compiz runs smoothly. (I don't have fglrxinfo ..) My /etc/X11/xorg.conf is empty ... How can I know the driver I am using ? just out of curiosity !!! Hope my experience helps someone ! -- kernel 2.6.24-16-generic + radeon driver = system freezes https://bugs.launchpad.net/bugs/220345 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317787] [NEW] KDE bug report in gnome
Public bug reported: I got this while running the jaunty updater last night. Application: KDE Daemon (kded4), signal SIGABRT Thread 1 (Thread 0xb613b700 (LWP 5779)): [KCrash Handler] #6 0xb7ff6430 in __kernel_vsyscall () #7 0xb66c66a0 in raise () from /lib/tls/i686/cmov/libc.so.6 #8 0xb66c8068 in abort () from /lib/tls/i686/cmov/libc.so.6 #9 0xb67041ed in ?? () from /lib/tls/i686/cmov/libc.so.6 #10 0xb670a5a4 in ?? () from /lib/tls/i686/cmov/libc.so.6 #11 0xb670c556 in free () from /lib/tls/i686/cmov/libc.so.6 #12 0xb68ec111 in operator delete () from /usr/lib/libstdc++.so.6 #13 0xb68ec16d in operator delete[] () from /usr/lib/libstdc++.so.6 #14 0xb6ad6e59 in QHashData::destroyAndFree () from /usr/lib/libQtCore.so.4 #15 0xb6b3a563 in ?? () from /usr/lib/libQtCore.so.4 #16 0xb6b39a97 in ?? () from /usr/lib/libQtCore.so.4 #17 0xb6b24a5d in QAbstractFileEngineIterator::currentFileInfo () from /usr/lib/libQtCore.so.4 #18 0xb6b7b789 in ?? () from /usr/lib/libQtCore.so.4 #19 0xb6b30e8b in ?? () from /usr/lib/libQtCore.so.4 #20 0xb6b318e3 in ?? () from /usr/lib/libQtCore.so.4 #21 0xb6b31d0f in QDirIterator::hasNext () from /usr/lib/libQtCore.so.4 #22 0xb6b246b8 in QAbstractFileEngine::entryList () from /usr/lib/libQtCore.so.4 #23 0xb6b78fef in QFSFileEngine::entryList () from /usr/lib/libQtCore.so.4 #24 0xb6b29978 in QDir::entryInfoList () from /usr/lib/libQtCore.so.4 #25 0xb6b29baf in QDir::entryInfoList () from /usr/lib/libQtCore.so.4 #26 0xb7e4a1e6 in ?? () from /usr/lib/libkio.so.5 #27 0xb7e4a8b3 in KDirWatch::addDir () from /usr/lib/libkio.so.5 #28 0xb7fcee87 in ?? () from /usr/lib/libkdeinit4_kded4.so #29 0xb7fcf007 in ?? () from /usr/lib/libkdeinit4_kded4.so #30 0xb7fd2750 in ?? () from /usr/lib/libkdeinit4_kded4.so #31 0xb7fd27e9 in ?? () from /usr/lib/libkdeinit4_kded4.so #32 0xb7fd4c83 in ?? () from /usr/lib/libkdeinit4_kded4.so #33 0xb6bbac10 in QMetaObject::activate () from /usr/lib/libQtCore.so.4 #34 0xb6bbb992 in QMetaObject::activate () from /usr/lib/libQtCore.so.4 #35 0xb6bf5ab7 in QTimer::timeout () from /usr/lib/libQtCore.so.4 #36 0xb6bc15be in QTimer::timerEvent () from /usr/lib/libQtCore.so.4 #37 0xb6bb56ef in QObject::event () from /usr/lib/libQtCore.so.4 #38 0xb706e87c in QApplicationPrivate::notify_helper () from /usr/lib/libQtGui.so.4 #39 0xb70766fe in QApplication::notify () from /usr/lib/libQtGui.so.4 #40 0xb7b8e00d in KApplication::notify () from /usr/lib/libkdeui.so.5 #41 0xb6ba5ff1 in QCoreApplication::notifyInternal () from /usr/lib/libQtCore.so.4 #42 0xb6bd3f31 in ?? () from /usr/lib/libQtCore.so.4 #43 0xb6bd06d0 in ?? () from /usr/lib/libQtCore.so.4 #44 0xb6471b18 in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0 #45 0xb64751c3 in ?? () from /usr/lib/libglib-2.0.so.0 #46 0xb6475381 in g_main_context_iteration () from /usr/lib/libglib-2.0.so.0 #47 0xb6bd0628 in QEventDispatcherGlib::processEvents () from /usr/lib/libQtCore.so.4 #48 0xb7108ee5 in ?? () from /usr/lib/libQtGui.so.4 #49 0xb6ba46ba in QEventLoop::processEvents () from /usr/lib/libQtCore.so.4 #50 0xb6ba487a in QEventLoop::exec () from /usr/lib/libQtCore.so.4 #51 0xb6ba6f35 in QCoreApplication::exec () from /usr/lib/libQtCore.so.4 #52 0xb706e6f7 in QApplication::exec () from /usr/lib/libQtGui.so.4 #53 0xb7fd5996 in kdemain () from /usr/lib/libkdeinit4_kded4.so #54 0x080486b2 in _start () why wasn't this reported using apport? the notification happened through some kde application. before you ask, I can't provide any additional information. I wiped my system this afternoon (as part of scheduled cyclical maintenance) I'm just reporting the bug how it came up like it asked me to. ** Affects: ubuntu Importance: Undecided Status: New -- KDE bug report in gnome https://bugs.launchpad.net/bugs/317787 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317786] [NEW] ln inode problem in 8.10?
Public bug reported: As a newbie i installed ubuntu 8.10, systemupdate, atidrivers for mobility x700, installed and configured wine for glide and video-memsize and half-life including patch 1.6 well working then, gnome-commander and krusader, too. Then i asked to get a shortcut named C: ohne the gnome- desktop to my .wine folder in ubuntuusers.de and got the answer: ln -s .wine/drive_c Desktop/Wine-C . So i created a working shortcut, nautilus showed files properly but wine did not load half-life as before, worked on hdd for a few seconds but no effort and no report. After shutdown and restart x-server was not loading, many problems to get back with an older kernel. Now i read about problems with programms like trueimage depending on inode-problems. So my hint to check the ln-function (and maybe other) using changed inode-structures in 8.10, too. Best wishes michael ** Affects: ubuntu Importance: Undecided Status: New -- ln inode problem in 8.10? https://bugs.launchpad.net/bugs/317786 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317785] [NEW] E: /var/cache/apt/archives/sun-java6-jre_6-10-0ubuntu2_all.deb: il sottoprocesso pre-installation script ha restituito un codice di errore 1
Public bug reported: E: /var/cache/apt/archives/sun-java6-jre_6-10-0ubuntu2_all.deb: il sottoprocesso pre-installation script ha restituito un codice di errore 1 ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 8.10 ErrorMessage: il sottoprocesso pre-installation script ha restituito un codice di errore 1 NonfreeKernelModules: nvidia Package: sun-java6-jre 6-10-0ubuntu2 PackageArchitecture: all SourcePackage: sun-java6 Title: package sun-java6-jre 6-10-0ubuntu2 failed to install/upgrade: il sottoprocesso pre-installation script ha restituito un codice di errore 1 Uname: Linux 2.6.27-9-generic i686 ** Affects: sun-java6 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- E: /var/cache/apt/archives/sun-java6-jre_6-10-0ubuntu2_all.deb: il sottoprocesso pre-installation script ha restituito un codice di errore 1 https://bugs.launchpad.net/bugs/317785 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317785] Re: E: /var/cache/apt/archives/sun-java6-jre_6-10-0ubuntu2_all.deb: il sottoprocesso pre-installation script ha restituito un codice di errore 1
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/21258959/Dependencies.txt ** Attachment added: DpkgTerminalLog.txt http://launchpadlibrarian.net/21258960/DpkgTerminalLog.txt -- E: /var/cache/apt/archives/sun-java6-jre_6-10-0ubuntu2_all.deb: il sottoprocesso pre-installation script ha restituito un codice di errore 1 https://bugs.launchpad.net/bugs/317785 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 311730] Re: Please build ata_piix into kernel (not as module)
Since pata_acpi and ata_generic were built statically into the kernel my PATA controller stopped working. I need a way to disable pata_acpi and use ata_generic instead. Please look at bug #315006 for detailed info -- Please build ata_piix into kernel (not as module) https://bugs.launchpad.net/bugs/311730 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 295994] Re: -ati crashes after upgrade if fglrx packages are installed
** Description changed: After an hardy-to-intreprid upgrade, startup fails, prompting to continue in low-graphics mode (but the ATI radeon 9200 SE graphic card still displays the correct high resolution...) Backtrace (in Xorg.log): 0: /usr/X11R6/bin/X(xf86SigHandler+0x79) [0x80c3009] 1: [0xb80d0400] 2: /usr/lib/xorg/modules/drivers//radeon_drv.so [0xb7b52b07] 3: /usr/lib/xorg/modules/drivers//radeon_drv.so [0xb7b2055a] 4: /usr/lib/xorg/modules/drivers//radeon_drv.so [0xb7b234fc] 5: /usr/X11R6/bin/X(InitOutput+0x96f) [0x80aac9f] 6: /usr/X11R6/bin/X(main+0x279) [0x8071b19] 7: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7cd4685] 8: /usr/X11R6/bin/X [0x8071101] Saw signal 11. Server aborting. dkms reports that fglrx is installed, although I am not requesting to use it in my new xorg.conf : $ dkms status fglrx, 8.543, 2.6.22-14-generic, i686: installed (original_module exists) fglrx, 8.543, 2.6.27-7-generic, i686: installed Synaptic reports that - linux-restricted-modules-2.6.22-14-generic - linux-restricted-modules-2.6.24-21-generic - fglrx-kernel-source (2:8.543-0ubuntu4) - fglrx-modaliases (2:8.543-0ubuntu4) - xorg-driver-fglrx (2:8.543-0ubuntu4) were installed. I finally resolved this problem by removing all of this 5 packages. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) + Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard [1043:80f2] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 SE] [1002:5964] (rev 01) (prog-if 00 [VGA controller]) + Subsystem: ASUSTeK Computer Inc. ASUS Radeon 9200 SE / TD / 128M [1043:c006] -- -ati crashes after upgrade if fglrx packages are installed https://bugs.launchpad.net/bugs/295994 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 287413] Re: Xorg crashed with SIGSEGV in hwlIconUpload()
** Description changed: Ubuntu release: 8.10 Beta Version of package: xorg 1:7.4~5ubuntu2 Tried to enable FGLRX driver again after an apparent update today (noticed fglrx package being updated by the update manager). However it still failed (X fails to start and finally boots into failsafe X), and this is the crash report as a result. This bug report is therefore related to/a dupliate of #286140. ProblemType: Crash Architecture: i386 CrashCounter: 1 DistroRelease: Ubuntu 8.10 ExecutablePath: /usr/bin/Xorg NonfreeKernelModules: fglrx Package: xserver-xorg-core 2:1.5.2-2ubuntu1 [modified: usr/lib/xorg/modules/extensions/libdri.so usr/lib/xorg/modules/extensions/libglx.so] ProcAttrCurrent: unconfined ProcCmdline: /usr/X11R6/bin/X :0 -br -audit 0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7 ProcEnviron: PATH=/sbin:/bin:/usr/sbin:/usr/bin LANG=en_GB.UTF-8 ProcVersion: Linux version 2.6.27-7-generic (bui...@vernadsky) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Wed Oct 22 00:29:18 UTC 2008 Signal: 11 SourcePackage: xorg-server StacktraceTop: hwlIconUpload () atiddxLoadLogo () atiddxLogoInit () atiddxScreenInit () AddScreen () Title: Xorg crashed with SIGSEGV in hwlIconUpload() Uname: Linux 2.6.27-7-generic i686 UserGroups: xkbcomp: Stacktrace: #0 0x08072648 in dixLookupPrivate () #1 0xb7a53998 in DRILock () from /usr/lib/xorg/modules/extensions//libdri.so #2 0xb770ac91 in atiddxLeaveVT () from /usr/lib/xorg/modules/drivers//fglrx_drv.so #3 0xb7452c8f in ?? () from /usr/lib/xorg/modules//libxaa.so #4 0x080a8af9 in AbortDDX () #5 0x0813c428 in AbortServer () #6 0x080c30c3 in xf86SigHandler () #7 signal handler called #8 0xb774397a in hwlIconUpload () from /usr/lib/xorg/modules/drivers//fglrx_drv.so #9 0xb772d770 in atiddxLoadLogo () from /usr/lib/xorg/modules/drivers//fglrx_drv.so #10 0xb772d8ce in atiddxLogoInit () from /usr/lib/xorg/modules/drivers//fglrx_drv.so #11 0xb770781c in atiddxScreenInit () from /usr/lib/xorg/modules/drivers//fglrx_drv.so #12 0x0807137f in AddScreen () #13 0x080aa526 in InitOutput () #14 0x08071b19 in main () + + + [lspci] + 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge [1106:3188] (rev 01) + Subsystem: ASUSTeK Computer Inc. Device [1043:80a3] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc R360 NJ [Radeon 9800 XT] [1002:4e4a] + Subsystem: ASUSTeK Computer Inc. Device [1043:c000] -- Xorg crashed with SIGSEGV in hwlIconUpload() https://bugs.launchpad.net/bugs/287413 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 284505] Re: 8.543 Crashes in CompositePicture
** Description changed: Xorg.log attached, and xorg.conf attached (just switch radeon with fglrx). Backtrace: 0: /usr/X11R6/bin/X(xf86SigHandler+0x79) [0x80c2fe9] 1: [0xb80ca400] 2: /usr/lib/xorg/modules//glesx.so [0xb57b2936] 3: /usr/lib/xorg/modules//libxaa.so(XAAComposite+0x176) [0xb75be0c6] 4: /usr/lib/xorg/modules//libxaa.so [0xb75db4c1] 5: /usr/X11R6/bin/X [0x817718a] 6: /usr/X11R6/bin/X(CompositePicture+0x19a) [0x815fdea] 7: /usr/X11R6/bin/X [0x8165cb5] 8: /usr/X11R6/bin/X [0x81629d5] 9: /usr/X11R6/bin/X(Dispatch+0x34f) [0x808c87f] 10: /usr/X11R6/bin/X(main+0x47d) [0x8071d1d] 11: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7cbf685] 12: /usr/X11R6/bin/X [0x8071101] + + [lspci] + 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) + Subsystem: Intel Corporation Device 7270 + 01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility X1600] + Subsystem: Apple Computer Inc. Device 0080 -- 8.543 Crashes in CompositePicture https://bugs.launchpad.net/bugs/284505 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 314785] Re: Postinstall script is wrong
** Also affects: usplash (Ubuntu) Importance: Undecided Status: New -- Postinstall script is wrong https://bugs.launchpad.net/bugs/314785 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312764] Re: update-rc.d: Use of uninitialized value
** Bug watch added: Debian Bug tracker #512003 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=512003 ** Also affects: sysvinit (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=512003 Importance: Unknown Status: Unknown ** Changed in: sysvinit (Ubuntu) Status: New = Confirmed -- update-rc.d: Use of uninitialized value https://bugs.launchpad.net/bugs/312764 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 307643] Re: [packaging] atiogl.xml merge issue when upgrading fglrx
** Description changed: This bug happen when I try to install fglrx for ati hd 2400 Setting up xorg-driver-fglrx (2:8.543-0ubuntu4) ... Configuration file `/etc/ati/atiogl.xml' == File on system created by you or by a script. == File also in package provided by package maintainer. What would you like to do about it ? Your options are: Y or I : install the package maintainer's version N or O : keep your currently-installed version D : show the differences between the versions Z : background this process to examine the situation The default action is to keep your current version. *** atiogl.xml (Y/I/N/O/D/Z) [default=N] ? dpkg: error processing xorg-driver-fglrx (--configure): EOF on stdin at conffile prompt dpkg: dependency problems prevent configuration of fglrx-amdcccle: ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 8.10 ErrorMessage: EOF on stdin at conffile prompt NonfreeKernelModules: fglrx Package: xorg-driver-fglrx 2:8.543-0ubuntu4 ProcVersion: Linux version 2.6.27-9-generic (bui...@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1hostname11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 SourcePackage: fglrx-installer Title: package xorg-driver-fglrx 2:8.543-0ubuntu4 failed to install/upgrade: EOF on stdin at conffile prompt Uname: Linux 2.6.27-9-generic i686 xkbcomp: + + [lspci] + 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 671MX [1039:0671] + Subsystem: Elitegroup Computer Systems Device [1019:5053] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon HD 2400 [1002:94c9] + Subsystem: Elitegroup Computer Systems Device [1019:2375] -- [packaging] atiogl.xml merge issue when upgrading fglrx https://bugs.launchpad.net/bugs/307643 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 303697] Re: [fglrx] video tearing / vsync problems
** Description changed: Videos tear when I play them with xv extension. I enabled vsync with Catalyst Control Center and running 'aticonfig --initial --input=/etc/X11/xorg.conf --overlay-type=Xv', but the video still tears. I tried several Xorg.conf settings but without any improvement. Removing Xorg.conf does not change anything. I have this problem since Hardy with a Radeon HD 3650. Even Windows XP with Catalyst driver tears. Some time ago I switched to a Radeon HD 4670 (see lspci-vvnn.log), but even this card tears. The videos tear and do not flicker. This bug also occurs with Compiz disabled. Maybe this problem have something to do with the on-board Intel Graphics Media Accelerator 3100 of the Intel DG33TL [1] mainboard. [1] http://www.intel.com/products/desktop/motherboards/dg33tl/dg33tl- overview.htm + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) + Subsystem: Intel Corporation Device [8086:5044] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV730XT [Radeon HD 4670] [1002:9490] + Subsystem: Hightech Information System Ltd. Device [1787:2268] -- [fglrx] video tearing / vsync problems https://bugs.launchpad.net/bugs/303697 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 308964] Re: Resume fails with fglrx due to ASIC hang with dual-head configuration
** Description changed: Ubuntu Version: 8.10 xorg-driver-fglrx Version: 8.543 GFX Card: ATI Radeon Xpress 1250 Resume fails when using the attached xorg dual-head configuration without an external monitor connected. I have enabled Randr 1.2 support with the following command because otherwise X would not even be able to start without an external monitor connected. aticonfig --set-pcs-str=DDX,EnableRandr12,TRUE No password prompt appears and the following dump is written to /var/log/kern.log. Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713011] [fglrx] ASIC hang happens. Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713023] Pid: 5823, comm: Xorg Tainted: P 2.6.27-7-generic #1 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713047] [f8cb8c2d] KCL_dump_stack+0xd/0x10 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713117] [f8ccd49c] firegl_hardwareHangRecovery+0x1c/0x40 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713180] [f8d4cceb] ? _ZN4Asic9WaitUntil15ResetASICIfHungEv+0xb/0x20 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713256] [f8cb7c18] ? KAS_GetTickCounter+0x8/0x10 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713301] [f8d4cc87] _ZN4Asic9WaitUntil15WaitForCompleteEv+0x97/0xf0 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713375] [f8d51d16] _ZN6AsicR616ASICIdleInternalEN4Asic15idle_WaitMethodE+0x96/0x1f0 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713450] [f8cb7c38] ? KCL_get_pubdev+0x8/0x10 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713504] [f8ce87cd] ? firegl_trace+0x3d/0x1b0 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713570] [f8cb7c38] ? KCL_get_pubdev+0x8/0x10 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713623] [f8ce87cd] ? firegl_trace+0x3d/0x1b0 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713688] [c014f082] ? update_wall_time+0x442/0x890 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713698] [f8d296b6] ? QSSubmitList+0x56/0x170 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713775] [f8d4b42c] _ZN4Asic7PM4idleENS_15idle_WaitMethodE+0x4c/0x80 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713849] [f8d44565] _ZN15QS_PRIVATE_CORE7PM4idleEN4Asic15idle_WaitMethodE+0x35/0x70 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.713930] [f8d31f11] _ZN10QS_PRIVATE11synchronizeEv+0x31/0x40 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714000] [f8d297e7] QSSynchronize+0x17/0x20 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714067] [f8d32bd9] _Z14uQSSynchronizej+0x19/0x20 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714136] [f8d3ab4b] _Z8uCWDDEQCjjjPvjS_+0x3db/0x1260 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714207] [f8d28cd4] CMMQS_uCWDDEQC+0x34/0x40 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714274] [f8ceb202] firegl_cmmqs_CWDDE_32+0x402/0x4b0 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714324] [c02548ca] copy_from_user+0x3a/0x130 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714330] [c01c64a6] d_materialise_unique+0x156/0x370 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714343] [f8ce998d] firegl_cmmqs_CWDDE32+0x8d/0x140 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714409] [c0211bf2] cap_capable+0x12/0x40 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714419] [c013a828] capable+0x18/0x40 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714426] [f8ce9900] firegl_cmmqs_CWDDE32+0x0/0x140 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714481] [f8cc8577] firegl_ioctl+0x227/0x2b0 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714523] [c01c64a6] d_materialise_unique+0x156/0x370 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714543] [c01c64a6] d_materialise_unique+0x156/0x370 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714548] [c037c999] schedule+0x429/0x790 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714558] [f8cbcafe] ip_firegl_ioctl+0x1e/0x20 [fglrx] Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714598] [c01c64a6] d_materialise_unique+0x156/0x370 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714602] [c01beef1] vfs_ioctl+0x81/0x90 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714606] [c01c64a6] d_materialise_unique+0x156/0x370 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714610] [c01bf086] do_vfs_ioctl+0x66/0x1f0 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714614] [c02549fb] copy_to_user+0x3b/0x130 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714618] [c02147d8] cap_file_ioctl+0x8/0x10 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714624] [c01bf27b] sys_ioctl+0x6b/0x70 Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714628] [c0103f7b] sysenter_do_call+0x12/0x2f Nov 6 13:28:04 thomas-samsungr20 kernel: [ 4199.714632] [c01c64a6] d_materialise_unique+0x156/0x370 Nov 6 13:28:04
Re: [Bug 303537] Re: [jaunty] libavcodec-unstripped-52 does not appear to support libx264 codec
Paul Gevers p...@climbing.nl writes: Bug 243451 is said to be fixed (the packages are built for all architectures except ia64). That means that a new version of x264 is available now in Jaunty. Maybe that helps with this bug? the binaries are not available in the archive yet. A new upload of ffmpeg is necessary anyway to build against the new x264. -- Gruesse/greetings, Reinhard Tartler, KeyID 945348A4 -- [jaunty] libavcodec-unstripped-52 does not appear to support libx264 codec https://bugs.launchpad.net/bugs/303537 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 302126] Re: Kernel 2.6.27.10 - Failed to open DRM connection
** Description changed: Today I have upgraded ubuntu to kernel 2.6.27.10. After reboot system hangs with a black screen while trying to load Xorg. I'm returning to previous kernel 2.6.27.8. drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 (WW) fglrx(0): Failed to open DRM connection + + [lspci] + 00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3) + Subsystem: Micro-Star International Co., Ltd. Device [1462:7125] + 05:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV380 [Radeon X600 (PCIE)] [1002:5b62] + Subsystem: PC Partner Limited Device [174b:0490] -- Kernel 2.6.27.10 - Failed to open DRM connection https://bugs.launchpad.net/bugs/302126 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 296497] Re: [fglrx] HD3200 has random lockups due to cpu intensity via xorg/compiz. [AMD Feature#7647] [EPR#260338]
** Description changed: On ATI Radeon HD3200 (Foxconn (Bengal) RS780 Integrated), compiz causes regular lockups (sometimes random) when it drives up cpu intensity. These locks are soon resolved after about 1 second or more or less. But always come back when cpu goes up. top reports xorg drives up to over 80% CPU when firefox merely scrolls. This only happens when compiz is enabled, not when fglrx itself is enabled. Compiz people said that it was a driver problem, so reporting here. This is NOT AN INSTALLER ISSUE, it installs fine. Launchpad says there's no page xorg-driver-fglrx when I try to choose it for bug reporting. + + [lspci] + 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] + Subsystem: Acer Incorporated [ALI] Device [1025:014e] + 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon HD 3200 Graphics [1002:9610] + Subsystem: Acer Incorporated [ALI] Device [1025:014e] -- [fglrx] HD3200 has random lockups due to cpu intensity via xorg/compiz. [AMD Feature#7647] [EPR#260338] https://bugs.launchpad.net/bugs/296497 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 292771] Re: No 3D acceleration after distupgrade to 8.10
** Description changed: Hardware: Notebook HP nx8220, Mobility x600 After upgrading to 8.10, fglrx still loads but 3D acceleration does not work anymore. Although DRI is not disabled in xorg.conf, Xorg.0.log says it is: --- (II) Module xaa: vendor=X.Org Foundation compiled for 1.5.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 4.1 (**) fglrx(0): NoDRI = YES (**) fglrx(0): Capabilities: 0x ... (WW) fglrx(0): *** (WW) fglrx(0): * DRI initialization disabled!* (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available* (WW) fglrx(0): *** ... (EE) fglrx(0): XMM failed to open CMMQS connection. (II) fglrx(0): XMM failed to initialize! -- Running glxinfo gives me -- X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 159 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 10 Current serial number in output stream: 10 - I tried un- and reinstalling anything fglrx-related using envyng without any success. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) + Subsystem: Hewlett-Packard Company Device [103c:0934] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M24 1P [Radeon Mobility X600] [1002:3150] + Subsystem: Hewlett-Packard Company Device [103c:0934] -- No 3D acceleration after distupgrade to 8.10 https://bugs.launchpad.net/bugs/292771 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 288620] Re: fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1) [EPR#257840]
** Description changed: [ 69.478362] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff66 is not supported on this hardware (return code = 1) [ 69.810350] [fglrx] CMM init INV FB MC:0xd000, length:0x3000 [ 69.810359] [fglrx] Reserved FB block: Shared offset:0, size:100 [ 69.810360] [fglrx] Reserved FB block: Unshared offset:ff77000, size:88000 Don't known if this is fatal or not, never seem this before. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) + Subsystem: ASUSTeK Computer Inc. Device [1043:1767] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobilitiy Radeon HD 3650 [1002:9591] (prog-if 00 [VGA controller]) + Subsystem: ASUSTeK Computer Inc. Device [1043:1633] -- fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff66 is not supported on this hardware (return code = 1) [EPR#257840] https://bugs.launchpad.net/bugs/288620 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 287229] Re: fglrx crashes when setting certain video options [EPR#260347]
** Description changed: Binary package hint: xorg-driver-fglrx Intrepid 2.6.27-7-generic #1 SMP Fri Oct 17 22:24:30 UTC 2008 x86_64 GNU/Linux xorg-driver-fglrx: Installiert: 2:8.543-0ubuntu2 Kandidat: 2:8.543-0ubuntu2 Versions-Tabelle: *** 2:8.543-0ubuntu2 0 500 http://ftp-stud.fht-esslingen.de intrepid/multiverse Packages 100 /var/lib/dpkg/status When I installed Intrepid alpha I tried to move my old configuration file /etc/X11/xorg.conf to the new intrepid install. These options which were used to speed up video and reduce tearing and some other video improvments included this option (in the Device Section): Option TexturedXRender 1 I cam around, that as sonn as i added that option, my log in screen would flicker for about 1s and then die (with 1px blue vertical lines and ~30px yellow lines) and then a long blackscreen which will stayuntill you reboot. The only option to reset these things is to set the option to zer0, and update /etc/ati/amd... is to use thsi command: sudo aticonfig --input=/etc/X11/xorg.conf --tls=1 I think it shouldn't be the case that TexturedXRender should prevent any user from graphically logging in, aswell as the option is required to watch movies/TV on your PC (as I do sometimes). + + [lspci] + 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] + Subsystem: ASRock Incorporation Device [1849:9600] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4870] [1002:9440] + Subsystem: ATI Technologies Inc Device [1002:0502] -- fglrx crashes when setting certain video options [EPR#260347] https://bugs.launchpad.net/bugs/287229 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 288415] Re: fglrx unable to display 1440x900 resolution
** Description changed: Using Ubuntu 8.10 / Intrepid (updated using update manager) xorg-driver-fglrx Installed: 2:8.543-0ubuntu3 Candidate: 2:8.543-0ubuntu3 When i change the resolution to 1440x900 (xrandr -s 1440x900) the resolution is not working Even using modeline from: # gtf 1440 900 60 # 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz Modeline 1440x900_60.00 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync It is acting as 1600x900 @ 59Hz . I'm using an ASUS VW193D-B lc . If change to ati or radeon driver, the resolutions works fine, but i can't use compiz. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) + Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80f2] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152] (prog-if 00 [VGA controller]) + Subsystem: Info-Tek Corp. Device [18bc:0418] -- fglrx unable to display 1440x900 resolution https://bugs.launchpad.net/bugs/288415 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 287197] Re: Problem playing films with the latest ATI drivers
** Description changed: Hi I'm having problems when I'm trying to watch videos. I have tried several applications, VLC, Mplayer and and several video, avi, flv divx, formats but the problem is the same. The image is like ...flashing and that makes impossible watching anything. I found this problem since I have updated to the latest ATI drivers. If I need to provide any extra information, I don't know where to start, please let it me know. Thanks I'm using Ubuntu 8.10 beta vlc: Installed: 0.9.4-1ubuntu3 OpenGL renderer string: ATI Radeon HD 3600 Series OpenGL version string: 2.1.8087 Release smplayer: Installed: 0.6.1-1 + + [lspci] + 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2) + Subsystem: ASUSTeK Computer Inc. Device [1043:82f2] + 02:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon HD 3600 Series [1002:9598] + Subsystem: PC Partner Limited Device [174b:be42] -- Problem playing films with the latest ATI drivers https://bugs.launchpad.net/bugs/287197 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 278662] Re: usb mouse not recognised if plugged after bootup
That was a transient bug, and cannot be reproduced AFAIK on the released versions nor the development version of *Ubuntu. Feel free to close it and thanks for triaging :-) -- usb mouse not recognised if plugged after bootup https://bugs.launchpad.net/bugs/278662 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 258823] Re: With fglrx, OpenOffice buttons are invisible and reappear when you hover over them
** Description changed: Binary package hint: openoffice.org Description:Ubuntu 8.04.1 Release:8.04 openoffice.org: Installed: 1:2.4.1-1ubuntu2 Candidate: 1:2.4.1-1ubuntu2 Version table: *** 1:2.4.1-1ubuntu2 0 500 http://us.archive.ubuntu.com hardy-updates/main Packages 100 /var/lib/dpkg/status 1:2.4.0-3ubuntu6 0 500 http://us.archive.ubuntu.com hardy/main Packages When I opened openoffice I expected to see all the buttons and menu drop downs. but they were hidden. When I moused over where they should be they reappeared one at a time while hovering over them. ProblemType: Bug Architecture: i386 Date: Sun Aug 17 07:45:10 2008 DistroRelease: Ubuntu 8.04 NonfreeKernelModules: fglrx Package: openoffice.org-core 1:2.4.1-1ubuntu2 PackageArchitecture: i386 ProcEnviron: PATH=/usr/lib/openoffice/program:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: openoffice.org Uname: Linux 2.6.24-19-386 i686 + + [lspci] + 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] SiS645DX Host Memory AGP Controller [1039:0646] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] [1002:4e48] (prog-if 00 [VGA controller]) + Subsystem: ATI Technologies Inc Unknown device [1002:4f72] -- With fglrx, OpenOffice buttons are invisible and reappear when you hover over them https://bugs.launchpad.net/bugs/258823 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 253988] Re: [fglrx] X crashes when I click on desktop near right side [AMD Feature#7647] [EPR#260224]
** Description changed: I'm using fglrx with compiz on x86_64. When I click near the right (about 2 inches or closer to the right) on the desktop (regular window's don't crash it) X crashes with the following backtrace and log from X.org.log. The problem is completely: Backtrace: 0: /usr/bin/X(xf86SigHandler+0x6a) [0x48402a] 1: /lib/libc.so.6 [0x7fc076152100] 2: /usr/lib/dri/fglrx_dri.so [0x7fc071427253] 3: /usr/lib/dri/fglrx_dri.so [0x7fc071442524] 4: /usr/lib/dri/fglrx_dri.so [0x7fc071444201] 5: /usr/lib/dri/fglrx_dri.so [0x7fc071449871] 6: /usr/lib/dri/fglrx_dri.so [0x7fc071449fbd] 7: /usr/lib/dri/fglrx_dri.so [0x7fc070faa372] 8: /usr/lib/dri/fglrx_dri.so [0x7fc071211ae2] 9: /usr/lib/xorg/modules/extensions//libglx.so [0x7fc07557d75d] 10: /usr/lib/xorg/modules/extensions//libglx.so [0x7fc07554a462] 11: /usr/lib/xorg/modules/extensions//libglx.so [0x7fc075549c12] 12: /usr/lib/xorg/modules/extensions//libglx.so [0x7fc07554dc6c] 13: /usr/bin/X(Dispatch+0x2ef) [0x44eaaf] 14: /usr/bin/X(main+0x47d) [0x436b9d] 15: /lib/libc.so.6(__libc_start_main+0xf4) [0x7fc07613e1c4] 16: /usr/bin/X(FontFileCompleteXLFD+0x279) [0x435ed9] Fatal server error: Caught signal 8. Server aborting (II) AIGLX: Suspending AIGLX clients for VT switch + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub [8086:2990] (rev 02) + Subsystem: Dell Device [1028:01da] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] [1002:7183] + Subsystem: Dell Device [1028:0d02] -- [fglrx] X crashes when I click on desktop near right side [AMD Feature#7647] [EPR#260224] https://bugs.launchpad.net/bugs/253988 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 105545] Re: HUAWEI E220/E620 no longer works in Feisty/Hardy
I'm having if not the same a very similar behavior with a Novatel PCMCIA 3G card with Gutsy, Hardy and Ibex. The card is working 100% in a Acer 4520 Laptop ( AMD Athlon with ATI chipset ) but in a desktop witha ASROCk AM2NF6G-VSTA with a PCI to PCMCIA adator ENE CB1410 Cardbus controller just disconnects randomly but certainly after 2 or 10 minutes . The issue apears with in Gutsy or 8.10 before and after all the upgrades. The constant I can see is the disconnection of course and ... [ 114.078904] type=1503 audit(1232088537.168:5): operation=inode_permission requested_mask=w:: denied_mask=w:: fsuid=0 name=/dev/ttyUSB0 pid=5465 profile=/usr/sbin/cupsd [ 114.082132] type=1503 audit(1232088537.172:6): operation=inode_permission requested_mask=w:: denied_mask=w:: fsuid=0 name=/dev/ttyUSB1 pid=5465 profile=/usr/sbin/cupsd [ 477.568047] usb 1-1: USB disconnect, address 2 [ 477.572837] option 1-1:1.0: device disconnected [ 477.574394] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 477.577876] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 477.579576] option 1-1:1.1: device disconnected [ 477.884031] usb 1-1: new full speed USB device using ohci_hcd and address 3 [ 478.064040] usb 1-1: device descriptor read/64, error -62 [ 478.348028] usb 1-1: device descriptor read/64, error -62 [ 478.628026] usb 1-1: new full speed USB device using ohci_hcd and address 4 [ 478.808045] usb 1-1: device descriptor read/64, error -62 [ 479.092029] usb 1-1: device descriptor read/64, error -62 [ 479.372030] usb 1-1: new full speed USB device using ohci_hcd and address 5 [ 479.780035] usb 1-1: device not accepting address 5, error -62 [ 479.836032] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 483.328030] usb 1-1: new full speed USB device using ohci_hcd and address 7 [ 483.541184] usb 1-1: configuration #1 chosen from 1 choice [ 483.546477] option 1-1:1.0: GSM modem (1-port) converter detected [ 483.557141] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 483.559610] option 1-1:1.1: GSM modem (1-port) converter detected [ 483.560258] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 The Cardbus adaptor seems to be working fine with other PCMCIA devices, but with the Novatel 3G card just keeps disconnecting. I have tryed many other generic workarounds like passing parameters to the kernel at boot time disabling ACPI or irqpol and so on... but the only result is that the computer just freeze. I not sure if this is the right place to report this bug but I couldn find the exact problem with this exact hardware configuration in launchpad, I did found it in general help forums but nobody seems to have an answer for it. Thanks in advance. -- HUAWEI E220/E620 no longer works in Feisty/Hardy https://bugs.launchpad.net/bugs/105545 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 314792] Re: revert to clone after monitor poweroff / screensaver
** Description changed: After installing the ubuntu fglrx driver, I set up my two monitors with dual-screen. It works perfectly, up until I either turn one of the monitors off by pressing the power button, or by leaving it idle until the screen saver pops up. When either of those 2 actions happens, fglrx reverts back to clone mode. If I reboot the machine, it stays in dual- screen mode just fine. When I look at /var/log/Xorg.0.log when I power off the monitor, nothing pops up. If you need anything else (first time reporting a bug) let me know. I'm on Ubuntu 8.10 + + [lspci] + 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a1) + Subsystem: ASUSTeK Computer Inc. Device [1043:8239] + 03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV630 [Radeon HD 2600 Series] [1002:9589] + Subsystem: VISIONTEK Device [1545:3330] -- revert to clone after monitor poweroff / screensaver https://bugs.launchpad.net/bugs/314792 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 314600] Re: fglrx versions newer than 8.543 cause system hang and panic
** Description changed: I am currently using Jaunty with the latest 2.6.28-4-generic #8-Ubuntu x86-64 kernel, and any time I try to use fglrx 8.552 or 8.561 (apt- pinned to Intrepid X server and libdrm2), I get the system hanging at a black screen when I try to start X, followed by a kernel panic after I try pressing a few keys. See attached logfile for a serial-console stacktrace. Interestingly enough, fglrx reports itself as version 8.56.4, which seems a bit mismatched from the package version number 8.561. In addition, using the official ATI installer to buildandinstallpkg Ubuntu/intrepid within the Intrepid LiveCD gives the same result. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) + Subsystem: Hewlett-Packard Company Device [103c:30e7] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon HD 3650 [1002:9591] + Subsystem: Hewlett-Packard Company Device [103c:3604] -- fglrx versions newer than 8.543 cause system hang and panic https://bugs.launchpad.net/bugs/314600 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 313883] Re: error wile instaling ATI drivers
** Description changed: first time user, and frustrated!! nothing work on this linux :) cant play videos nor enable visual effects. ati mobility radeon x1300 1gb ram... something is wrong with it. never had so much problem with windows ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 8.10 ErrorMessage: EOF on stdin at conffile prompt NonfreeKernelModules: fglrx Package: xorg-driver-fglrx 2:8.543-0ubuntu4 ProcVersion: Linux version 2.6.27-9-generic (bui...@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1hostname11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 SourcePackage: fglrx-installer Title: package xorg-driver-fglrx 2:8.543-0ubuntu4 failed to install/upgrade: EOF on stdin at conffile prompt Uname: Linux 2.6.27-9-generic i686 xkbcomp: + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) + Subsystem: Dell Device [1028:01bd] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M52 [Mobility Radeon X1300] [1002:7149] + Subsystem: Dell Device [1028:2003] -- error wile instaling ATI drivers https://bugs.launchpad.net/bugs/313883 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 313294] Re: MPlayer causes X lockup on fglrx
** Description changed: Using the gl2 output, gmplayer sometimes (not always, but annoyingly often) causes an X lockup when its window is restored (de-minimized, or clicked to the foreground from behind another window). The whole screen will freeze, with only a black rectangle showing where the MPlayer window is supposed to be. At first I thought the whole system was hung, but I've discovered that there are Alt+SysRq+.. combinations that still work even when regular Ctrl+Alt+Del doesn't anymore. So, today I was checking some log files after rebooting from such a crash, and hey, what do you know, there is some kind of error/trace in /var/log/messages (attached). + + [lspci] + 00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T890CF Host Bridge [1106:0351] + Subsystem: VIA Technologies, Inc. K8T890CF Host Bridge [1106:0351] + 02:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon X550/X700 Series (RV410) [1002:5657] + Subsystem: PC Partner Limited Device [174b:0500] -- MPlayer causes X lockup on fglrx https://bugs.launchpad.net/bugs/313294 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 313157] Re: networking applet warning icon is not going
I set managed=true then restarted, logged out but nothing changed :'( -- networking applet warning icon is not going https://bugs.launchpad.net/bugs/313157 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 311204] Re: sysfs: duplicate filename 'vcsa1' can not be created
** Description changed: Continuing the reports from https://bugs.launchpad.net/ubuntu/+source/linux/+bug/196409 I reported the bug for 2.6.27-10... then i had removed the fglrx driver that i had installed via envy-ng and it booted correctly again. I switched to the Ubuntu fglrx a week ago. it worked, even though i used the laptop rarely. Today it the bug occured again a few times, but this time it does'nt stop at 32000 any more, but resets to 0 and keeps on with the udevd messages... the system doesn't allow switching consoles but reacts to ctrl-alt-del with a clean reboot. first i tried: booting into 2.6.27-11-generic rescue mode - worked. choosing resume ended in the endless message loop again. second: booted into rescue more, fixed the X server and rebooted: success! so i will not touch the fglrx for a while and stay with the default open source driver. this is a sad situtation, but as an owner of an ATI graphics card i am used to a lot of problems ;-) OK.. i hope this helps in finding the bug. ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 8.10 Package: linux-image-2.6.27-11-generic 2.6.27-11.22 ProcCmdLine: root=UUID=6080f66b-413e-41c2-9aa4-34c04e261080 ro single ProcEnviron: LANGUAGE=de PATH=/home/username/bin/scripts:/home/username/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=de_DE.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.27-11.22-generic SourcePackage: linux + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) + Subsystem: Lenovo Device [17aa:2015] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X1400 [1002:7145] + Subsystem: Lenovo Device [17aa:202a] -- sysfs: duplicate filename 'vcsa1' can not be created https://bugs.launchpad.net/bugs/311204 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 310121] Re: xorg fails to load X11 session on 2.6.27-11 generic flavour
** Description changed: $ ubuntu-bug -p xorg Error:Cannot open display :0 - Exiting but on 2.6.27-8 generic flavour 1) Description: Ubuntu 8.10 Release: 8.10 2) xorg: Instalados: 1:7.4~5ubuntu3 Candidato: 1:7.4~5ubuntu3 Tabla de versión: *** 1:7.4~5ubuntu3 0 500 http://ftp.tecnoera.com intrepid/main Packages 100 /var/lib/dpkg/status 3) X11 working 4) screen goes black, as in 2.6.27-10 generic flavour + + [lspci] + 00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204] + Subsystem: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV630 PRO AGP [Radeon HD 2600 PRO AGP] [1002:9587] + Subsystem: ATI Technologies Inc Device [1002:0028] -- xorg fails to load X11 session on 2.6.27-11 generic flavour https://bugs.launchpad.net/bugs/310121 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 309638] Re: [fglrx] resume from stand by / hibernate fails on Intrepid 64 on 4GB of RAM
** Description changed: Information on the configuration Computer Specs: http://eu.computers.toshiba-europe.com/innovation/product/Satellite-A210-16F/135223/ Computer modifications: 4GB RAM, 320 GB HDD Ubuntu Flavor: Ubuntu Intrepid Ibex (x86-64) Identically affects: Ubuntu Hardy Heron (x86-64) Kernel: 2.6.27-9-generic Information on the problem Installing the fglrx restricted driver causes the computer to hang after a stand by or hibernate, and demands a hard reboot. X won't display anything, consoles are not accessible, even ssh dies. After some research I found out that there was a similar problem were people were completely unable to use their desktop when running Ubuntu 64 with fglrx on 4GB of RAM, so I tested with only 2GB of ram (physically and with boot option mem=2G) and stand by (hibernate) works fine. With boot option mem=3G I get the same problematic behavior. My mtrr table feels wrong (on the fact that it does not display anywhere 256M which I believe is my actual graphics memory), but I don't really know if this has anything to do with the problem or how to properly manipulate it. + + [lspci] + 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] + Subsystem: Toshiba America Info Systems Device [1179:ff00] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] [1002:9581] + Subsystem: Toshiba America Info Systems Device [1179:ff00] -- [fglrx] resume from stand by / hibernate fails on Intrepid 64 on 4GB of RAM https://bugs.launchpad.net/bugs/309638 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 308267] Re: x11 crashes durring screensaver
** Description changed: When my system goes to screensaver x11 crashes, but not every time. Current system: Ubuntu 8.10 (gnome) Dell optiplex 745 Graphics Card: ATI Radeon x1950 pro Dual Screen Monitors Common applications I run are: Eclipse (ganymede) - I build and run an java application using swing, and jogl. Firefox 3.0.4 Evolution Amarok Gnome Terminal gedit Screensaver - Euphoria I've attached a copy of my xorg log. When the crash occurs I can only restart my x server by restarting my computer. Also after the crash occurs my computer ends up on a display that looks like the system is starting up, but it does not make it to the login screen. I am able to switch to a different virtual login, but not able to restart the x server. This problem probably occurs about every 10-15 times it goes to screensaver. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub [8086:2990] (rev 02) + Subsystem: Dell Device [1028:01da] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV570 [Radeon X1950 Pro] [1002:7280] + Subsystem: ATI Technologies Inc Device [1002:0b12] -- x11 crashes durring screensaver https://bugs.launchpad.net/bugs/308267 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 307378] Re: Screen cropped after LCD sleep on 8.10
** Description changed: Binary package hint: xorg This happens when my LCD HDTV connect via HDMI goes into sleep/power saving mode. On resume the screen is zoomed to a smaller area of the screen and i can not access the bottom and the far left of the screen.To get an idea it is like the zoom feature of the compiz package but zoom is not enabled and no mouse tracking occurs. This issue is correctee by resetting the Xserver. This problem renders most of the desktop inaccessible and therefore is very limiting after it had occured. Description: Ubuntu 8.10 Release: 8.10 xorg: Installed: 1:7.4~5ubuntu3 Candidate: 1:7.4~5ubuntu3 Version table: *** 1:7.4~5ubuntu3 0 500 http://gb.archive.ubuntu.com intrepid/main Packages 100 /var/lib/dpkg/status The expected behaviour was to return me to the desktop as i left the machine. As a side note my LCD screen used to detect before (8.04) and now is reported as unknown. ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 8.10 NonfreeKernelModules: fglrx Package: xorg 1:7.4~5ubuntu3 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_GB.UTF-8 SHELL=/bin/bash ProcVersion: Linux version 2.6.27-9-generic (bui...@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 SourcePackage: xorg Uname: Linux 2.6.27-9-generic i686 xkbcomp: + + [lspci] + 00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1) + Subsystem: Elitegroup Computer Systems Device [1019:2602] + 02:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV630 [Radeon HD 2600 Series] [1002:9589] + Subsystem: Info-Tek Corp. Device [18bc:3692] -- Screen cropped after LCD sleep on 8.10 https://bugs.launchpad.net/bugs/307378 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285366] Re: fglrx in mesa mode
** Description changed: hello, I've installed fglrx from repos. It installs and works, but I get awefully low performance. I think I found the problem, which is showed in CCC : http://img220.imageshack.us/my.php?image=cccgc5.png It's in polish, but as you can see it reports that my HD4850 is using fglrx but OpenGL is from mesa. Although, fglrxinfo shows : display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 1.4 (2.1.8087 Release So it seems like it should be ok, but in q3 I get like 70 fps instead of 1k+, and I cant even start etqw cause of segfaults. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) + Subsystem: ABIT Computer Corp. Device [147b:1085] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442] + Subsystem: CardExpert Technology Device [10b0:0401] -- fglrx in mesa mode https://bugs.launchpad.net/bugs/285366 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 304045] Re: Hang when opening driver hardware applet
** Description changed: while try to open driver hardware applet it hangs ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 8.10 ErrorMessage: EOF on stdin at conffile prompt NonfreeKernelModules: fglrx Package: xorg-driver-fglrx 2:8.552-0ubuntu0.1 ProcVersion: Linux version 2.6.27-10-generic (bui...@vernadsky) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Fri Nov 21 12:00:22 UTC 2008 SourcePackage: fglrx-installer Title: package xorg-driver-fglrx 2:8.552-0ubuntu0.1 failed to install/upgrade: EOF on stdin at conffile prompt Uname: Linux 2.6.27-10-generic i686 xkbcomp: + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 21) + Subsystem: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e52] + Subsystem: Fujitsu Siemens Computers Device [1734:1080] -- Hang when opening driver hardware applet https://bugs.launchpad.net/bugs/304045 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 302219] Re: problems with fglrx on kernel 2.6.27-10 generic
** Description changed: I have not been able to get a graphical display since 2.6.27.8-generic. In other words, I can not start a X sessions. The problem is related to the appropriate ATI driver for 2.6.27-10 and *-11 kernels. Something seems not to be working. I am used to see this thing happen, since I suffered a similar problem on 8.04. So, while booting, I choose to continue working on 2.26.7-8 up to the point where the driver is compatible with a new kernel version. It seems that this problem is inherent to ATI cards, more than nvidia ones. + + + [lspci] + 00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204] + Subsystem: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV630 PRO AGP [Radeon HD 2600 PRO AGP] [1002:9587] + Subsystem: ATI Technologies Inc Device [1002:0028] -- problems with fglrx on kernel 2.6.27-10 generic https://bugs.launchpad.net/bugs/302219 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315028] Re: package xorg-driver-fglrx None [modified: /var/lib/dpkg/info/xorg-driver-fglrx.list] failed to install/upgrade: intentando sobreescribir `/usr/share/man/man8/atieventsd.8.gz', que est
** Description changed: Sale el siguiente error: Se encontraron errores al procesar: /var/cache/apt/archives/xorg-driver-fglrx_2%3a8.543-0ubuntu4_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) configura:... Data incomplete in file /etc/X11/xorg.conf Device section Configured Video Device must have a Driver line. aticonfig: Parsing the configuration file failed. The above error messages are reported from XFree86 and may assist you in diagnosing the problem with your configuration input file. Try use -f option to generate a new configuration file. Data incomplete in file /etc/X11/xorg.conf Device section Configured Video Device must have a Driver line. aticonfig: Parsing the configuration file failed. The above error messages are reported from XFree86 and may assist you in diagnosing the problem with your configuration input file. Try use -f option to generate a new configuration file. ProblemType: Package Architecture: i386 Dependencies: DistroRelease: Ubuntu 8.10 ErrorMessage: intentando sobreescribir `/usr/share/man/man8/atieventsd.8.gz', que está también en el paquete fglrx-6-8-0 Package: xorg-driver-fglrx None [modified: /var/lib/dpkg/info/xorg-driver-fglrx.list] ProcVersion: Linux version 2.6.27-9-generic (bui...@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 SourcePackage: fglrx-installer Title: package xorg-driver-fglrx None [modified: /var/lib/dpkg/info/xorg-driver-fglrx.list] failed to install/upgrade: intentando sobreescribir `/usr/share/man/man8/atieventsd.8.gz', que está también en el paquete fglrx-6-8-0 Uname: Linux 2.6.27-9-generic i686 xkbcomp: + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) + Subsystem: ASRock Incorporation Device [1849:2570] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) + Subsystem: C.P. Technology Co. Ltd Device [148c:2093] -- package xorg-driver-fglrx None [modified: /var/lib/dpkg/info/xorg-driver-fglrx.list] failed to install/upgrade: intentando sobreescribir `/usr/share/man/man8/atieventsd.8.gz', que est? tambi?n en el paquete fglrx-6-8-0 https://bugs.launchpad.net/bugs/315028 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 316206] Re: X fglrx driver doesn't do 3D acceleration with v2.4.1-0ubuntu9
** Description changed: After upgrading to libdrm2 v2.4.1-0ubuntu9, the X server's fglrx driver refuses to do 3D acceleration. Things worked fine with v2.4.1-0ubuntu6. Two Xorg.0.logs with v2.4.1-0ubuntu9 and v2.3.1-0build1 attached. (I had to downgrade to that 2.3.1 version because that was the highest available on the Ubuntu ftp server; the 0ubuntu9 one had apparently replaced the 0ubuntu6 I had before) + + [lspci] + 00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T890CF Host Bridge [1106:0351] + Subsystem: VIA Technologies, Inc. K8T890CF Host Bridge [1106:0351] + 02:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon X550/X700 Series (RV410) [1002:5657] + Subsystem: PC Partner Limited Device [174b:0500] -- X fglrx driver doesn't do 3D acceleration with v2.4.1-0ubuntu9 https://bugs.launchpad.net/bugs/316206 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312849] Re: [i915] X crashes after gdm login because of xrandr (Jaunty)
** Description changed: Binary package hint: libxrandr2 X crashes in the Jaunty Alpha 2 Live CD and yesterdays daily after Gdm login. It works at first if I have removed compiz but afterwards it crashes again with this backtrace. It seems to work fine with vesa driver. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) + Subsystem: Sony Corporation Unknown device [104d:81e2] + 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA]) + Subsystem: Sony Corporation Unknown device [104d:81e2] -- [i915] X crashes after gdm login because of xrandr (Jaunty) https://bugs.launchpad.net/bugs/312849 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 291485] Re: package libfontenc1 1:1.0.4-3 failed to install/upgrade:
** Description changed: After upgrading from Ubuntu 8.04 to Ubuntu 8.10, a lot of modules failed to upgrade. Logging in to the failsafe xterm and issuing #apt-get update #apt-get upgrade #apt-get install solved the problem. This report was from before issuing the apt-get commands Computer Dell Latitude D620 ProblemType: Package Architecture: i386 Dependencies: libgcc1 1:4.3.2-1ubuntu11 zlib1g 1:1.2.3.3.dfsg-12ubuntu1 gcc-4.3-base 4.3.2-1ubuntu11 findutils 4.4.0-2ubuntu3 libc6 2.8~20080505-0ubuntu7 DistroRelease: Ubuntu 8.10 ErrorMessage: ErrorMessage: paketet libfontenc1 är redan installerat och konfigurerat NonfreeKernelModules: nvidia Package: libfontenc1 1:1.0.4-3 SourcePackage: libfontenc Title: package libfontenc1 1:1.0.4-3 failed to install/upgrade: Uname: Linux 2.6.27-7-generic i686 + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) + Subsystem: Dell Device [1028:01c2] + 01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1) + Subsystem: Dell Device [1028:01c2] -- package libfontenc1 1:1.0.4-3 failed to install/upgrade: https://bugs.launchpad.net/bugs/291485 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 289762] Re: crashes if I disconnect my drawing tablet while it is open
** Description changed: Binary package hint: gimp Ubuntu 8.10 gimp 2.6.1-1ubuntu3 Steps to reproduce: * Hotplug a wacom tablet using the new hotplugging support in intrepid (i.e. no inputdevice settings in xorg.conf, just relying on the default HAL rules in /usr/share/hal/fdi/policy/20thirdparty/10-wacom.fdi) * Start GIMP and make a new image, draw something with the tablet which should work fine * turn off / unplug the tablet * use your mouse to move the cursor from outside of the GIMP window to inside it expected GIMP acts as it would normally if the tablet was not connected actual result GIMP crashes, no error dialog or anything running GIMP from a terminal gives this message: The program 'gimp' received an X Window System error. This probably reflects a bug in the program. The error was 'BadDevice, invalid or uninitialized input device'. (Details: serial 314305 error_code 168 request_code 148 minor_code 30) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) (script-fu:1988): LibGimpBase-WARNING **: script-fu: gimp_wire_read(): error + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) + Subsystem: Giga-byte Technology Device [1458:5000] + 01:00.0 VGA compatible controller [0300]: nVidia Corporation G80 [GeForce 8800 GTS] [10de:0193] (rev a2) + Subsystem: nVidia Corporation Device [10de:0421] -- crashes if I disconnect my drawing tablet while it is open https://bugs.launchpad.net/bugs/289762 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 282777] Re: xorg xevie extention fails on XevieSendEvent()
** Description changed: The xevie extension fails when XevieSendEvent() is called with the following message X Error of failed request: BadLength (poly request too large or internal Xlib length error) Major opcode of failed request: 156 (XEVIE) Minor opcode of failed request: 3 () Serial number of failed request: 11 Current serial number in output stream: 11 The source code for the test program is located: http://www.freedesktop.org/~ajax/xevie/xevie-test.txt Note this is not the same bug reported in Bug #210905: not push-to-talk - xevie problem and freedesktop-bugs #17394 Ubuntu intrepid (development branch) amd64 (this bug is also present for i386) Relevant packages: libxevie1 1:1.0.2-3 libx11-6 2:1.1.5-2ubuntu1 xorg 1:7.4~2ubuntu7 xserver-xorg 1:7.4~2ubuntu7 xserver-xorg-core 2:1.5.1-1ubuntu3 + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) + Subsystem: Toshiba America Info Systems Device [1179:ff10] + 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) + Subsystem: Toshiba America Info Systems Device [1179:ff10] -- xorg xevie extention fails on XevieSendEvent() https://bugs.launchpad.net/bugs/282777 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 277069] Re: Java slow on remote X
** Description changed: I've submitted this bug as https://bugs.freedesktop.org/show_bug.cgi?id=17868 as well. Though the problem may not be in ia32-libs -package, it contains the /usr/lib32/libX11.so.6.2.0 library that appears to be somehow relevant to the problem at hand. Some Java applications, such as the trial version in http://www.typingmaster.com/, run unusably slow when used over a remote X connection. I'm using Ubuntu Hardy 8.04.1 with LTSP5, Linux kernel 2.6.24-19-server, with 32-bit firefox and 32-bit Java-plugin. The relevant package versions are here: firefox32 2.0.0.17 sun-java32 1.6.0.5 sun-java6-jre 6-06-0ubuntu1 ia32-libs 2.2ubuntu11 The issue does not appear to be Java-version related (it exists in 1.5 and 1.6 versions). I have not tested the very latest Java-versions though. The reason I'm reporting this as a possible XCB-related issue is that one can workaround the problem by using an X11-library that does not link to XCB. In current Ubuntu version (Hardy), /usr/lib32/libX11.so.6.2.0 library links to /usr/lib32/libxcb-xlib.so.0 and /usr/lib32/libxcb.so.1 libraries, XCB version is 1.1. In previous Ubuntu version (Gutsy) the X11-library does not do this. When the new library shared object replaced with the old one, the problem disappears, and Java applications that had problems run fine. There may be some other differences between the X11-libraries, but using XCB as an underlying implementation seems to be a major change, or is it? All other applications do not appear to have these problems, Java applications appear to be the sole source of these problems. I'm adding two attachments that show tshark-dump of network traffic in both cases, perhaps it helps to analyze the issue. What happens there is one keypress on typingmaster Java-version, on Hardy/XCB case it takes half a minute to process one keypress and switch a screen, on Gutsy/no- XCB case it takes maybe a second. Juha + + [lspci] + 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8623 [Apollo CLE266] [1106:3123] + Subsystem: VIA Technologies, Inc. Unknown device [1106:] + 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics [1106:3122] (rev 03) (prog-if 00 [VGA controller]) + Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics [1106:3122] -- Java slow on remote X https://bugs.launchpad.net/bugs/277069 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 155226] Re: [nvidia]tearing artifacts in window effects, videos
** Description changed: I have an Nvidia 7600GT card, with the nvidia-glx-new drivers, using compiz. I've noticed that window effects, the most trivial of which is dragging the window around with by the title bar, causes tearing artifacts like you'd see if you needed to start double-buffering. Tearing also happens in videos, or other apps that update a lot (screen savers etc). Installing compizconfig-settings-manager, going into the General screen, and enabling sync to vblank fixes this. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02) + Subsystem: Giga-byte Technology Device [1458:5000] + 01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GT] [10de:0391] (rev a1) + Subsystem: eVga.com. Corp. Device [3842:c554] -- [nvidia]tearing artifacts in window effects, videos https://bugs.launchpad.net/bugs/155226 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 252767] Re: Ubuntu won't login
The files contain no trace of a crash, and so they aren't much use. The crash should leave a trace at the end of one of the log files. Without it, there is absolutely nothing we can do, which is why I closed the report. Also, we need a full backtrace really so that the bug can be sent upstream. A full backtrace can be obtained by following the steps at https://wiki.ubuntu.com/X/Backtracing -- Ubuntu won't login https://bugs.launchpad.net/bugs/252767 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 153797] Re: Fails to resume when using Nvidia-glx or Nvidia-glx-new
** Description changed: Binary package hint: nvidia-glx Using Gutsy on a Dell D620 with Nvidia Quadro NVS-110M, Compiz NOT enabled: Linux topino 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 i686 GNU/Linux First of all, using the nv driver resume works perfectly. When using either nvidia-glx or nvidia-glx-new, resume fails (blank screen, unresponsive PC) and it requires an hard reboot. By changing the value of POST_VIDEO=true to false in /etc/default/acpi-support, resume works, smoothly. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) + Subsystem: Dell Unknown device [1028:01c2] + 01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1) (prog-if 00 [VGA]) + Subsystem: Dell Unknown device [1028:01c2] -- Fails to resume when using Nvidia-glx or Nvidia-glx-new https://bugs.launchpad.net/bugs/153797 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 151828] Re: [gutsy] brightness keys only pop up a slider on a t61p, they don't affect screen brightness
** Description changed: Binary package hint: hotkey-setup On my T61p, the brightness keys do pop up the brightness scrollbar and scroll it properly. Unfortunately, the brightness of the laptop display is _not_ affected. The T61p has an nvidia Quadro FX 570M, and I have yet to find a way to turn the brightness up or down once booted into Linux (usually, the screen is at full brightness, but if I boot the laptop when it's unplugged, the screen is very dark and there doesn't seem to be a way to brighten it up without shutting the machine off. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) + Subsystem: Lenovo Lenovo Thinkpad T61 [17aa:20b1] + 01:00.0 VGA compatible controller [0300]: nVidia Corporation Quadro FX 570M [10de:040c] (rev a1) (prog-if 00 [VGA]) + Subsystem: Lenovo Unknown device [17aa:20d9] -- [gutsy] brightness keys only pop up a slider on a t61p, they don't affect screen brightness https://bugs.launchpad.net/bugs/151828 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 151771] Re: nvidia tv out black white, while setting pal-g, due to starting with dual-head on lcd+crt
** Description changed: Binary package hint: nvidia-glx When I define in xorg.conf that I start X with dual-head on my LCD+CRT, my TV is black-white (like sending NTSC, while it needs to be PAL-B) when I switch monitors with nvidia-settings. I normally work with dual head on my LCD and old CRT monitor. Sometimes I want to watch a movie and start nvidia-settings to switch my CRT- output to TV-Output, but for some reason, the output get blurry and black and white. Nvidia does not output to PAL-B. However, when I define in xconf.org that I start X with LCD+TV the screen is in color (so PAL-B). So the problem is that I cannot dynamically switch my display-output. I first have to log-out, edit my xorg.conf en then log back in, because you cannot change the TVStandard from nvidia-settings. My xorg.conf looks like this for starting with TV-out # Option metamodes CRT: 1024x768 +1280+0, DFP: nvidia-auto-select +0+0; CRT: 800x600 +0+0, DFP: nvidia-auto-select +800+0; CRT: 640x480 +0+0, DFP: nvidia-auto-select +640+0 Option metamodes TV: nvidia-auto-select +1280+0, DFP: nvidia-auto-select +0+0 Option TVOutFormat COMPOSITE Option TVStandard PAL-B Option TwinViewXineramaInfoOrder DFP + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82975X Memory Controller Hub [8086:277c] (rev c0) + Subsystem: ASUSTeK Computer Inc. P5WDG2 WS Professional motherboard [1043:8178] + 06:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GS] [10de:0392] (rev a1) (prog-if 00 [VGA controller]) + Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8202] -- nvidia tv out black white, while setting pal-g, due to starting with dual-head on lcd+crt https://bugs.launchpad.net/bugs/151771 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 148345] Re: Averatec 2150 ATI x200 fglrx Edgy Feisty Gutsy Screen Flicker
** Description changed: I have a problem with my Averatec 2150 (aka MSI MS-1030 / MSI Megabook S270) and it's ATI x200 video chipset. The screen has a very annoying flicker. I started using Ubuntu 6.10 Edgy back in Nov 2006. In Jan 07 I switched to Kubuntu 6.10 and the problem seemed to get worse. Since May I've been battling Feisty with this problem. I haven't installed Gutsy, but ran the live cd and the problem was still there. The default drivers loaded with all versions of Ubuntu cause the problem. I have tried several different versions of the ATI Proprietary drivers on fresh installs of Ubuntu. I have tried the default Ubuntu fglrx drivers. I have tried different modelines for the 1280x800 lcd screen as suggested by this site (http://wiki.cchtml.com/index.php/Ubuntu_Dapper_Installation_Guide#HP_zt3000_.2F_Compaq_nx7000). I have seen a few posts in the Ubuntu Forums about changing the sideport memory for the video card in the bios to use system ram. The only option I have for the video ram is the size (ie 32-128 mb). There is no mention of sideport. I am at a loss here. Is there anyone with something else that I could try? Here's some info: uname -a: Linux mozz-laptop 2.6.20-16-generic #2 SMP Fri Aug 31 00:55:27 UTC 2007 i686 GNU/Linux I will post my dmesg and lspci shortly + + [lspci] + 00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10) + Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] + 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE) [1002:5955] (prog-if 00 [VGA]) + Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] -- Averatec 2150 ATI x200 fglrx Edgy Feisty Gutsy Screen Flicker https://bugs.launchpad.net/bugs/148345 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 144309] Re: amdcccle crashed with SIGSEV
** Description changed: Binary package hint: xorg-driver-fglrx Here the trace given by gdb : GNU gdb 6.6-debian Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type show copying to see the conditions. There is absolutely no warranty for GDB. Type show warranty for details. This GDB was configured as i486-linux-gnu... (no debugging symbols found) Using host libthread_db library /lib/tls/i686/cmov/libthread_db.so.1. (gdb) r Starting program: /usr/bin/amdcccle (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] [New Thread -1214462288 (LWP 8249)] (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) Program received signal SIGSEGV, Segmentation fault. [Switching to Thread -1214462288 (LWP 8249)] 0x0814f972 in CInfoDriver::UnInitialize () (gdb) quit The program is running. Exit anyway? (y or n) y The laptop is running Ubuntu gutsy Linux bibi2 2.6.22-12-generic #1 SMP Sat Sep 22 18:14:28 GMT 2007 i686 GNU/Linux and xorg-driver-fglrx version is : ii xorg-driver-fglrx 7.1.0-8.37.6+2.6.22.4-12.3 Video driver for ATI graphics accelerators regards + + [lspci] + 00:00.0 Host bridge [0600]: ATI Technologies Inc Device [1002:5a31] (rev 01) + Subsystem: Acer Incorporated [ALI] Device [1025:0109] + 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62] + Subsystem: Acer Incorporated [ALI] Device [1025:0109] -- amdcccle crashed with SIGSEV https://bugs.launchpad.net/bugs/144309 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 144014] Re: [nvidia-glx-new] Power down gives a garbled screen
** Description changed: Binary package hint: compiz WIth desktop effects enabled, when shutting down the machine, I don't get the progress bar as usual, but instead I just get a messed up version of my desktop background, with lots of lines and garbled colors. The machine shuts down properly, but it looks really weird and potentially scary/confusing to users. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04) + Subsystem: Fujitsu Siemens Computers Device [1734:107c] + 03:00.0 VGA compatible controller [0300]: nVidia Corporation NV41.8 [GeForce Go 6800] [10de:00c8] (rev a2) + Subsystem: Fujitsu Siemens Computers Device [1734:107c] -- [nvidia-glx-new] Power down gives a garbled screen https://bugs.launchpad.net/bugs/144014 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 137152] Re: resume after suspend + gnome or X session progressivly irresponsive
** Description changed: Binary package hint: nvidia-glx-new Resuming from suspend seems to goes OK, gnome session is restored and applications loads in the same state they where before shutdown, but when providing user interaction with the gnome destop, X-session or gnome became progressively irresponsive and finaly only mouse movements are possible. Ctrl+alt+backspace effectively kills the session, but once relogged inside gnome, same problems occurs again. Hard reboot fixes the issue. steps of irresponsiveness : - Icon on the destop (no contextual menu) - Programms does not launch - Windows closing inefeectivce - ... It all happends within minutes after a resume from Ram. more details on my system : Dell Precision M70 laptop Up to date Gutsy system (09/03/07) uname -a : 2.6.22-10-generic #1 SMP Wed Aug 22 08:11:52 GMT 2007 i686 GNU/Linux Please tell me if I can help in any way to get a mode precise diagnostic.. + + [lspci] + 01:00.0 VGA compatible controller: nVidia Corporation NV41 [Quadro FX Go1400] (rev a2) (prog-if 00 [VGA]) + Subsystem: Dell Unknown device 019b -- resume after suspend + gnome or X session progressivly irresponsive https://bugs.launchpad.net/bugs/137152 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 121653] Re: [gutsy] fglrx breaks over suspend/resume
** Description changed: SLUB (the new kernel memory allocator delivered with Gutsy Gibbon) exposes a bug in fglrx that manifests itself as a failure over suspend/resume. Note: This bug is sufficiently confirmed, please do not add new statements confirming it to the bug report. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) + Subsystem: Lenovo Unknown device [17aa:2015] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X1400 [1002:7145] (prog-if 00 [VGA]) + Subsystem: Lenovo Unknown device [17aa:202a] -- [gutsy] fglrx breaks over suspend/resume https://bugs.launchpad.net/bugs/121653 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 118808] Re: Unable to reach C3/C4 states while wireless is up.
** Description changed: Binary package hint: linux-source-2.6.22 While using GUTSY daily build 05-JUN-2007, with powertop 1.5 installed, I noticed that my computer was in the C2 power-saving state for an average of 95%+ of the time, and was not able to reach the battery- friendly C3 and C4 states. After some experimentation, I realized that this problem was caused by the wireless interface just being up, **even when not associated to any Access Point**. Just issuing 'ifconfig ath0 down', or disabling wireless in the Network Manager applet, would allow the computer to reach C3/C4 just fine, increasing my battery time significantly. My laptop is an Acer 3624, with a built-in Atheros Wi-fi Card. # uname -a Linux ubuntu 2.6.22-6-generic #1 SMP Fri Jun 1 19:24:12 GMT 2007 i686 GNU/Linux + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) + Subsystem: Acer Incorporated [ALI] Unknown device [1025:006a] + 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA]) + Subsystem: Acer Incorporated [ALI] Unknown device [1025:006a] -- Unable to reach C3/C4 states while wireless is up. https://bugs.launchpad.net/bugs/118808 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317789] [NEW] sudo /etc/init.d/alsa-utils reset cause trouble
Public bug reported: Look what is happen when I reset alsa-utils $ sudo /etc/init.d/alsa-utils reset * Resetting ALSA... Invalid card number. Usage: amixer options [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheckdo not perform range checking -v,--versionprint version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sIDget contents for one mixer simple control controlsshow all controls for given card contentsshow contents of all controls for given card cset cID P set control contents for one control cget cIDget control contents for one control Invalid card number. Usage: amixer options [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheckdo not perform range checking -v,--versionprint version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sIDget contents for one mixer simple control controlsshow all controls for given card contentsshow contents of all controls for given card cset cID P set control contents for one control cget cIDget control contents for one control Invalid card number. Usage: amixer options [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheckdo not perform range checking -v,--versionprint version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sIDget contents for one mixer simple control controlsshow all controls for given card contentsshow contents of all controls for given card cset cID P set control contents for one control cget cIDget control contents for one control Invalid card number. Usage: amixer options [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheckdo not perform range checking -v,--versionprint version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sIDget contents for one mixer simple control controlsshow all controls for given card contentsshow contents of all controls for given card cset cID P set control contents for one control cget cIDget control contents for one control Invalid card number. Usage: amixer options [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheckdo not perform range checking -v,--versionprint version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sIDget contents for one mixer simple control
[Bug 317789] Re: sudo /etc/init.d/alsa-utils reset cause trouble
'm on Intrepid 32 bit up to date. ** Attachment added: alsa-utils http://launchpadlibrarian.net/21259309/alsa-utils -- sudo /etc/init.d/alsa-utils reset cause trouble https://bugs.launchpad.net/bugs/317789 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317788] [NEW] Unrelated results after a search
Public bug reported: Binary package hint: thunderbird If I search by Subject, the results that Thunderbird returns is not related to my search text. It returns emails or newsgroup postings that don't even have the search text in the subject. The same goes for search by Message Body (offline newsgroup postings) or by To field. So for me the search feature in Thunderbird is totally useless and unusable. It doesn't matter how I invoke the search * Edit | Find | Search Message... * Right click on Folder or Newsgroup | Search Message... * Search box in toolbar The results are always unrelated to the search term! I have tried this on my work PC and my Home PC, and both return the same rubbish results. I'm using Thunderbird 2.0.0.18 (under Linux). Ubuntu 7.10 with most updates applied. I'll try and attach a screenshot which shows the problem. In the screenshot you will see I am searching by Subject for text containing what I entered tree build. And if you look at the search results. Not a single resulting message has the term tree build in the Subject line! ProblemType: Bug Architecture: i386 Date: Fri Jan 16 10:17:38 2009 Dependencies: DistroRelease: Ubuntu 7.10 NonfreeKernelModules: vmnet vmmon Package: mozilla-thunderbird None [modified: /var/lib/dpkg/info/mozilla-thunderbird.list] PackageArchitecture: all SourcePackage: thunderbird Uname: Linux graeme 2.6.22-16-generic #1 SMP Mon Nov 24 18:28:27 GMT 2008 i686 GNU/Linux ** Affects: thunderbird (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Unrelated results after a search https://bugs.launchpad.net/bugs/317788 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317788] Re: Unrelated results after a search
** Attachment added: Search results using Subject doesn't match search term used. http://launchpadlibrarian.net/21259293/Search_Messages.png -- Unrelated results after a search https://bugs.launchpad.net/bugs/317788 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 304249] Re: [jaunty] Presets should be updated because the ffmpeg version in Ubuntu is newer than in Debian
** Changed in: winff (Ubuntu) Status: Confirmed = Triaged -- [jaunty] Presets should be updated because the ffmpeg version in Ubuntu is newer than in Debian https://bugs.launchpad.net/bugs/304249 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236661] Re: [nvidia] X.org hangs machine on hardy with mieqEnequeue: out-of-order valuator event error
** Description changed: Binary package hint: xorg When I see the flash in the web, the system sometimes can't response for a long time(2 or 3 minutes). Lots of errors in /var/log/Xorg.0.log (attached) mieqEnequeue: out-of-order valuator event; dropping. tossed event which came in late ProblemType: Bug Architecture: i386 Date: Mon Jun 2 10:18:31 2008 DistroRelease: Ubuntu 8.04 ExecutablePath: /usr/bin/gnome-system-log NonfreeKernelModules: nvidia Package: gnome-utils 2.20.0.1-1ubuntu5 PackageArchitecture: i386 ProcEnviron: PATH=/usr/local/java/jdk1.6.0_05/bin:/usr/local/java/jdk1.6.0_05/jre/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/username/Work/grails-1.0.2/bin LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-utils Uname: Linux 2.6.24-16-generic i686 + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) + Subsystem: Acer Incorporated [ALI] Unknown device [1025:0110] + 01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1) (prog-if 00 [VGA controller]) + Subsystem: Acer Incorporated [ALI] Unknown device [1025:0110] -- [nvidia] X.org hangs machine on hardy with mieqEnequeue: out-of-order valuator event error https://bugs.launchpad.net/bugs/236661 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 232012] Re: restricted nvidia driver fails after upgrade to kubuntu 8.04
** Description changed: Binary package hint: xorg I am using an Nvidia Geforce2 MX400 on Kubuntu with Ubuntu metapackage installed too. Worked fine in Feisty and Gutsy. I upgraded from Gutsy with the restricted driver removed. After, the screen looked slightly shifted to the left (start button), and found the card was was set to vesa. I discovered the Hardware Drivers Manager in the System menu and selected the restricted driver. After a reboot I got dumped at the console. It complained displayconfig-gtk was not installed, so I apt-get to install. After another reboot I got a VGA screen with the displayconfig dialog. The dialog shows only vesa, and driver available open source and greyed out. I can select the geforce2 card, but this seems to be ignored. Monitor is shown correctly, but Resolution allows 800x600 only. After a reboot it logged in with correct maximum resolution 1024x768, card vesa, driver nv, restricted driver has been deselected by the system. I read about installing linux-restricted-modules-2.6.24-xx-386 manually so I did this and got different behavior. Now if I select resticted driver and reboot, I get the displayconfig dialog. It correctly detects the card, but not the monitor. So I select it manually, set the resolution and get dumped in the console. Reboot and its back the displayconfig but the card is vesa again. I know you cant use dpkg reconfigure-xserver xorg any more, so thats me stuck! Please let me know what info is required to track this bug. + + [lspci] + 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) + Subsystem: nVidia Corporation C51 Host Bridge + 03:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) + Subsystem: Dell Unknown device 0405 + [ 43.642895] pci :00:00.0: Enabling HT MSI Mapping -- restricted nvidia driver fails after upgrade to kubuntu 8.04 https://bugs.launchpad.net/bugs/232012 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 179574] Re: No display (blank screen) on log out
** Description changed: On log out or switch user, my screen often goes blank, with my monitor displaying an error message as if it's being fed wrong resolution/refresh info. Boot up is fine, happens only on log out and switch user. Ctrl+Alt+Backspace sometimes works to bring back GDM, however it also often results in a corrupted image (wrong resolution, visual noise). Sometimes the only solution is to hard reboot the computer. This happens with GDM and KDM. It's difficult for me to tell what package is causing the bug. I have had a similar issue in Feisty, but It wasn't nearly as severe. At this point a multi-user setup in a gui environment is impossible with GDM/KDM. I did find that I don't experience these issues when using XDM as the login manager. I can confirm that this happens to me with an Nvidia GeForce 6200 A-LE, with the nv or nvidia driver, regardless of desktop effects. Please let me know whatever config/log files I need to supply to help resolve this issue for future releases! + + [lspci] + 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host [1039:0661] (rev 11) + Subsystem: ABIT Computer Corp. Unknown device [147b:1809] + 01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 6200 A-LE [10de:0222] (rev a1) (prog-if 00 [VGA]) + Subsystem: eVga.com. Corp. Unknown device [3842:a295] -- No display (blank screen) on log out https://bugs.launchpad.net/bugs/179574 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 192407] Re: Thinkpad T61 crashes on resume from suspend
** Description changed: Hello, I would like to report a bug that sometimes (in about 10% of cases) inhibits wakeup from suspend of my Thinkpad T61 8889-2BG. I am using Ubuntu 7.10. This bug occurs with the standard kernel as well as with a self compiled vanilla kernel (2.6.24.2) patched with thinkpad-acpi. There is another bug while waking up from suspend in the standard kernel (notebook needs several key presses and trackpoint as well as trackpad movements to wake up) but this bug seems to be solved in 2.6.24.2. Therefore, I am only reporting the bug that persists in 2.6.24.2: The notebook suspends without any problems at all times. However, sometimes (about 10% of cases) after opening the lid or pressing the power button when the notebook is suspended, the moon stays lit, the battery LED and the power LED are turned on, the harddisk starts to spin, but then nothing else happens. The screen stays dark and there is no harddisk activity. Then, I have to power off the notebook and restart. The recommended DebuggingKernelSuspend method produces the following messages in dmesg: [1.864000] Using IPI No-Shortcut mode [1.864000] Magic number: 0:35:998 [1.864000] hash matches /build/buildd/linux-source-2.6.22-2.6.22/drivers/base/power/resume.c:57 [1.864000] hash matches device ttyae [1.868000] hash matches device 00:00 [1.868000] Freeing unused kernel memory: 364k freed With kernel version 2.6.24.2 the messages are as follows: [ 28.217234] Using IPI No-Shortcut mode [ 28.217367] Magic number: 0:865:403 [ 28.217368] hash matches drivers/base/power/main.c:97 [ 28.217599] Freeing unused kernel memory: 340k freed As the unreliability of suspending renders this feature completely useless I would be very grateful if someone could help me to solve the problem. Please let me know if you need any further information. Many thanks in advance! Karl Martin + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) + Subsystem: Lenovo Lenovo Thinkpad T61 [17aa:20b1] + 01:00.0 VGA compatible controller [0300]: nVidia Corporation Quadro NVS 140M [10de:0429] (rev a1) (prog-if 00 [VGA]) + Subsystem: Lenovo Unknown device [17aa:20d8] -- Thinkpad T61 crashes on resume from suspend https://bugs.launchpad.net/bugs/192407 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 138369] Re: [Gutsy] D-Link Airplus DWL 520+ (TI ACX 100) not recognized
** Description changed: Binary package hint: linux-source-2.6.22 I've got a problem with my wifi card D-Link Airplus DWL-520+. Gutsy doesn't even recognize it's there, so wlan0 intercace isn't available for configuring. It worked in Feisty (althought I had to manually configure it) + + [lspci] + 00:00.0 Host bridge [0600]: nVidia Corporation nForce3 250Gb Host Bridge [10de:00e1] (rev a1) + Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0300] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152] (prog-if 00 [VGA]) + Subsystem: PC Partner Limited Unknown device [174b:7c19] -- [Gutsy] D-Link Airplus DWL 520+ (TI ACX 100) not recognized https://bugs.launchpad.net/bugs/138369 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 158355] Re: Visual artifacts when scrolling up on networked 'nedit' window
** Description changed: Networked 'nedit' sessions display textual artifacts when scrolling up. The best way I can describe the artifacts is that groups of text lines are repeated throughout the window. Steps to reproduce: ssh -Y somecomputer nedit somefile.txt --- do this on the remote computer When nedit opens, scroll down to the middle of some text, then scroll up with either the mouse scroll wheel or using the keyboard up arrow to see the visual artifacts. I have tried this with several remote computers all with different operating systems and different versions of nedit. If I run nedit locally on my machine, these artifacts do not occur. Also, I never had this problem before updating my computer from Feisty to Gutsy last week. I also tried using a different text editor remotely (xemacs), but this did not suffer the same problems. My computer is running Kubuntu (Gutsy), with two monitors and an NVIDIA video card. + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub [8086:2990] (rev 02) + Subsystem: Dell OptiPlex 745 [1028:01da] + 01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GT] [10de:0391] (rev a1) (prog-if 00 [VGA controller]) + Subsystem: eVga.com. Corp. Unknown device [3842:c615] -- Visual artifacts when scrolling up on networked 'nedit' window https://bugs.launchpad.net/bugs/158355 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 118458] Re: Acer Aspire 1510LMi won't go to sleep or hibernate
** Description changed: The symptoms are: -sleep : shows some messages in console mode about going to sleep, then the display shows all sorts of colors and lines, and after a second or two it enters the sleep state. When pressing any key, i again get some sleep messages in console mode (no errors though), and then the screen blanks with the backlight still on, and the hard drive led blinking from time to time. In this state nothing short of a hard shutdown seems to work: mouse, keyboard, closing the lid does nothing. It just sits with the black screen, eating up CPU cycles ( i know this by the sound of my noisy CPU cooler) with hard drive led blinking from time to time. One thing is strange though: if I am to play some media file while putting it to sleep, like an mp3 or something, on waking up, while on that blank screen, the media seems to continue playing, although with pauses, like 4-5 seconds playing, 2-3 seconds pause, and so on. -hibernate : it seems to shutdown and save the data correctly (i can't tell because i don't know where to look) but when resuming i again get a blank screen, and a flashing power led. Linux thor-laptop 2.6.20-16-generic #2 SMP Wed May 23 01:46:23 UTC 2007 i686 GNU/Linux dmesg and lspci -vvnn output attached. + + [lspci] + 00:00.0 Host bridge [0600]: nVidia Corporation nForce3 Host Bridge [10de:00d1] (rev a4) + Subsystem: Acer Incorporated [ALI] Unknown device [1025:0059] + 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV36 [GeForce FX Go5700] [10de:0348] (rev a1) (prog-if 00 [VGA]) + Subsystem: Acer Incorporated [ALI] Unknown device [1025:0059] -- Acer Aspire 1510LMi won't go to sleep or hibernate https://bugs.launchpad.net/bugs/118458 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317790] [NEW] unable to detect type of stream
Public bug reported: Binary package hint: totem whenever i play video file it is showing unable to detect the type of stream ProblemType: Bug Architecture: amd64 Date: Fri Jan 16 08:26:35 2009 DistroRelease: Ubuntu 8.04 ExecutablePath: /usr/bin/totem-gstreamer Package: totem-gstreamer 2.22.1-0ubuntu2 PackageArchitecture: amd64 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: totem Uname: Linux 2.6.24-16-generic x86_64 ** Affects: totem (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- unable to detect type of stream https://bugs.launchpad.net/bugs/317790 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317790] Re: unable to detect type of stream
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/21259328/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/21259329/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/21259330/ProcStatus.txt -- unable to detect type of stream https://bugs.launchpad.net/bugs/317790 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317035] Re: [INTREPID]not shutdown with laptop asus x50 gl
I've unpacked linux-image-2.,6.27.11-generic and I've found a package known like asus-laptop.ko in the route /lib/modules/2.6.27-11/kernel/drivers/misc, I think this file contains the bug with my asus x50gl laptop. This bug is in Jaunty Jackalope too, and I've tested Opensuse11.1 live cd with gnome version and this bug is on, too. This bug not exist in Ubuntu Hardy Heron. Thanks -- [INTREPID]not shutdown with laptop asus x50 gl https://bugs.launchpad.net/bugs/317035 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315467] Re: ipw3945 in 2.6.24-23 not connecting
ok i was wrong bug exist, but only on certain AP (or configurations), in my house it is working, but in my girlfriend is not - both use WPA - PSK one is AES (not working), and another one migth be TKIP (i dont remember, and cant check, because i use crapy netgear, and i dont have any connecting to conf in hime) ** Attachment added: dmesg.tar.gz http://launchpadlibrarian.net/21259349/dmesg.tar.gz -- ipw3945 in 2.6.24-23 not connecting https://bugs.launchpad.net/bugs/315467 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 306286] Re: OpenOffice font Purisa disp lays letters ä,ö and å, but they don't show when printed
Chris, I'll try to reproduce my bug with the newest packages. Like I said, I never had the one with Purisa. You can find the font in the Thai fonts package (ttf-thai-tlwg) -- OpenOffice font Purisa displays letters ä,ö and å, but they don't show when printed https://bugs.launchpad.net/bugs/306286 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 258861] Re: Plasma crashes with some widgets
Gerard, to maintain a respectful atmosphere, please follow the code of conduct - http://www.ubuntu.com/community/conduct/ . Bug reports are handled by humans, the majority of whom are volunteers, so please bear this in mind. It is completely unacceptable to post personal attacks like that and will make you unpopular very quickly. -- Plasma crashes with some widgets https://bugs.launchpad.net/bugs/258861 You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to kdebase-workspace in ubuntu. -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 296710] Re: warning: ehci_hcd loaded AFTER uhci_hcd and ohci_hcd
With last Intrepid kernel (2.6.27-11) this problem is still there !!! (ehci 1.00 driver 10 dec 2004) What about the possibility to use hal to deal with the right hardware: by default, first load usb2 driver (if no usb2, then only use it with new one), or switch to the good driver when necessary ? -- warning: ehci_hcd loaded AFTER uhci_hcd and ohci_hcd https://bugs.launchpad.net/bugs/296710 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 239540] Re: restricted nvidia driver crash after kernel upgrade 2.6.24-18
** Description changed: Binary package hint: linux-restricted-modules-2.6.24-18-generic After the kernel upgrade, the restricted nvidia driver crashes. Not solved by -19 upgrade. GeForce 8600M GS. --- $ lsb_release -rd Description: Ubuntu 8.04.1 Release: 8.04.1 -- (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX Backtrace: 0: /usr/bin/X11/X(xf86SigHandler+0x7e) [0x80c780e] 1: [0xb7fbe420] 2: /usr/bin/X11/X(main+0x2ca) [0x807455a] 3: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb7d51450] 4: /usr/bin/X11/X(FontFileCompleteXLFD+0x201) [0x8073a91] Fatal server error: Caught signal 11. Server aborting - + + [lspci] + bus info: p...@:00:00.0 + description: VGA compatible controller -- restricted nvidia driver crash after kernel upgrade 2.6.24-18 https://bugs.launchpad.net/bugs/239540 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222034] Re: There is a kernel issue with 2.6.24-16-generic. Wireless seems to be broken on a PC with a Linksys WMP54G 2.0 PCI adapter (RaLink RT2500 802.11g ).
** Description changed: There is a kernel issue with 2.6.24-16-generic. Wireless seems to be broken for me. I have a PC with a Linksys WMP54G 2.0 PCI adapter (RaLink RT2500 802.11g ). I'm booting 2.6.22-14-generic and wireless runs smoothly, but when I switch to 2.6.24-16-generic wireless runs but with tons of errors, and as a result wireless speed drops. It's also a problem with 2.6.24-17-generic + + [lspci] + 00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 0e) + Subsystem: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] + 00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 0e) (prog-if 00 [VGA controller]) + Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7036] -- There is a kernel issue with 2.6.24-16-generic. Wireless seems to be broken on a PC with a Linksys WMP54G 2.0 PCI adapter (RaLink RT2500 802.11g ). https://bugs.launchpad.net/bugs/222034 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317792] [NEW] Cannot purge configuration files
Public bug reported: Binary package hint: angband Removed angband using apt-get remove angband Tryed to purge config files using synaptic : Mark for complete removal Occured in 8.04 Upgraded to 8.10 with same issue Tried again to Mark for complete removal with same result ProblemType: Package Architecture: i386 Dependencies: DistroRelease: Ubuntu 8.10 ErrorMessage: subprocess post-removal script returned error exit status 1 NonfreeKernelModules: fglrx Package: angband None SourcePackage: angband Title: package angband None failed to install/upgrade: subprocess post-removal script returned error exit status 1 Uname: Linux 2.6.27-9-generic i686 ** Affects: angband (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- Cannot purge configuration files https://bugs.launchpad.net/bugs/317792 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317792] Re: Cannot purge configuration files
** Attachment added: DpkgTerminalLog.gz http://launchpadlibrarian.net/21259411/DpkgTerminalLog.gz -- Cannot purge configuration files https://bugs.launchpad.net/bugs/317792 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317792] Re: Cannot purge configuration files
angband version: 1:3.0.9b-2 -- Cannot purge configuration files https://bugs.launchpad.net/bugs/317792 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317791] [NEW] oem-config-dm installer fails
Public bug reported: Binary package hint: oem-config OEM config installer failed to work after OEM install and user has entered their details. Bug found during ISO testing. ISO Image: http://cdimage.ubuntu.com/daily-live/20090116.1/jaunty- desktop-amd64.iso Installed OEM desktop as per instructions https://wiki.ubuntu.com/Testing/Cases/OEMInstall, installed gobby and tuxpaint and clicked on the oem-config-prepare icon on the desktop. Then rebooted. Then ran through and completed the new user setup procedure - then waited a long time and nothing happened. Switched to console #1 and saw the attached console messages. Hardware: Dell Inspiron 6400 laptop ** Affects: oem-config (Ubuntu) Importance: Undecided Status: New -- oem-config-dm installer fails https://bugs.launchpad.net/bugs/317791 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317791] Re: oem-config-dm installer fails
** Attachment added: Photo of OEM config-dm console messages http://launchpadlibrarian.net/21259407/DSCF8023.JPG -- oem-config-dm installer fails https://bugs.launchpad.net/bugs/317791 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317768] Re: lsb_release --version doesn't give version number
Thanks, but that is the intended behaviour and not a bug. Ubuntu doesn't ship with any lsb-* modules installed, so this output is correct. Feel free to install the various lsb-* modules yourself though. ** Changed in: lsb (Ubuntu) Status: New = Invalid -- lsb_release --version doesn't give version number https://bugs.launchpad.net/bugs/317768 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 32601] Re: Should display a package date column
I'd like to point out my usecase for this feature :) When an updated deb is released, I'd like to wait a few days before applying it, as an attempt to avoid oops we fixed this but broke that-patches.. So a date column in Synaptic would greatly help. -- Should display a package date column https://bugs.launchpad.net/bugs/32601 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 267089] Re: 2.6.27-2 kernel on intrepid: disk is mounted in RO after several hours
Luis R. Rodriguez wrote: sudo apt-get install linux-backports-modules-intrepid To get the bleeding edge ath9k. I am using backports and hence bleeding edge ath9k. It appears this may well be related to NM or wpa_supplicant. It was my non-developer mind thinking that the original problem was causing it, but I am obviously incorrect in that line of thought. My troub -- 2.6.27-2 kernel on intrepid: disk is mounted in RO after several hours https://bugs.launchpad.net/bugs/267089 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317795] [NEW] KDE-4.2-rc1 plasma instantly crashes
Public bug reported: Since upgading from 4.1.85 to 4.1.96 plasma doesn't start at all. When I try to manually start it it instantly crashes again. Jaunty, x86_64, intel GM45, Xorg 1.5.99.3 # DISPLAY=:1.0 gdb plasma # --nocrashhandler --nofork GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as x86_64-linux-gnu... (gdb) r --nocrashhandler --nofork Starting program: /usr/bin/plasma --nocrashhandler --nofork [Thread debugging using libthread_db enabled] [New Thread 0x7f2a802e1760 (LWP 15211)] unknown program name(15211)/ checkComposite: Plasma lacks an argb visual 0x0 0 unknown program name(15211)/ checkComposite: Plasma is COMPOSITE-less on 0x1b94f10 plasma(15211) KServiceFactory::findServiceByDesktopPath: findServiceByDesktopPath: not found QLayout: Attempting to add QLayout to QWidget , which already has a layout plasma(15211) KServiceFactory::findServiceByDesktopPath: findServiceByDesktopPath: /usr/share/applications/kde4/Kontact.desktop not found plasma(15211) KServiceFactory::findServiceByDesktopPath: findServiceByDesktopPath: /usr/share/applications/kde/amarok.desktop not found plasma(15211) Solid::Control::ManagerBasePrivate::loadBackend: Backend loaded: HAL-Power Object::connect: Attempt to bind non-signal TaskManager::TaskGroup::editRequest() QCoreApplication::postEvent: Unexpected null receiver [New Thread 0x7f2a61ed9950 (LWP 15215)] Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7f2a802e1760 (LWP 15211)] SystemTray::FdoSelectionManager::initSelection (this=0x1fd4740) at /build/buildd/kdebase-workspace-4.1.96/plasma/applets/systemtray/protocols/fdo/fdoselectionmanager.cpp:277 277 /build/buildd/kdebase-workspace-4.1.96/plasma/applets/systemtray/protocols/fdo/fdoselectionmanager.cpp: No such file or directory. in /build/buildd/kdebase-workspace-4.1.96/plasma/applets/systemtray/protocols/fdo/fdoselectionmanager.cpp (gdb) bt #0 SystemTray::FdoSelectionManager::initSelection (this=0x1fd4740) at /build/buildd/kdebase-workspace-4.1.96/plasma/applets/systemtray/protocols/fdo/fdoselectionmanager.cpp:277 #1 0x7f2a64943550 in SystemTray::FdoSelectionManager::qt_metacall (this=0x1fd4740, _c=QMetaObject::InvokeMetaMethod, _id=value optimized out, _a=0x7fff88318dc0) at /build/buildd/kdebase-workspace-4.1.96/obj-x86_64-linux-gnu/plasma/applets/systemtray/moc_fdoselectionmanager.cpp:78 #2 0x7f2a7b86f154 in QMetaObject::activate () from /usr/lib/libQtCore.so.4 #3 0x7f2a7b8753bf in ?? () from /usr/lib/libQtCore.so.4 #4 0x7f2a7b869a63 in QObject::event () from /usr/lib/libQtCore.so.4 #5 0x7f2a7bf7ebfd in QApplicationPrivate::notify_helper () from /usr/lib/libQtGui.so.4 #6 0x7f2a7bf869ba in QApplication::notify () from /usr/lib/libQtGui.so.4 #7 0x7f2a7e56933b in KApplication::notify () from /usr/lib/libkdeui.so.5 #8 0x7f2a7b85ad81 in QCoreApplication::notifyInternal () from /usr/lib/libQtCore.so.4 #9 0x7f2a7b886ac6 in ?? () from /usr/lib/libQtCore.so.4 #10 0x7f2a7b88322d in ?? () from /usr/lib/libQtCore.so.4 #11 0x7f2a76b3d1db in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0 #12 0x7f2a76b4099d in ?? () from /usr/lib/libglib-2.0.so.0 #13 0x7f2a76b40b5b in g_main_context_iteration () from /usr/lib/libglib-2.0.so.0 #14 0x7f2a7b88318f in QEventDispatcherGlib::processEvents () from /usr/lib/libQtCore.so.4 #15 0x7f2a7c010adf in ?? () from /usr/lib/libQtGui.so.4 #16 0x7f2a7b8596a2 in QEventLoop::processEvents () from /usr/lib/libQtCore.so.4 #17 0x7f2a7b85982d in QEventLoop::exec () from /usr/lib/libQtCore.so.4 #18 0x7f2a7b85bcdd in QCoreApplication::exec () from /usr/lib/libQtCore.so.4 #19 0x7f2a7feb86cb in kdemain (argc=3, argv=0x7fff88319a38) at /build/buildd/kdebase-workspace-4.1.96/plasma/shells/desktop/main.cpp:54 #20 0x7f2a7ac08586 in __libc_start_main () from /lib/libc.so.6 #21 0x004007c9 in _start () at ../sysdeps/x86_64/elf/start.S:113 (gdb) ** Affects: kdebase-workspace (Ubuntu) Importance: Undecided Status: New -- KDE-4.2-rc1 plasma instantly crashes https://bugs.launchpad.net/bugs/317795 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 301952] Re: baobab crashes with segmentation fault when trying to performe scan folder on a fat32 partition which is NOT included in folders to scan
** Changed in: gnome-utils Status: Confirmed = Fix Released -- baobab crashes with segmentation fault when trying to performe scan folder on a fat32 partition which is NOT included in folders to scan https://bugs.launchpad.net/bugs/301952 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
