ryangodammit wrote:
> Im trying to edit my maptoaction.lua. I understand I cant directly
> edit it but have to copy it to a different folder.
> That folder doesnt exist so I assume I have to create it as well as the
> new maptoaction.lua but it is write protected. Can I change this?
ryangodammit wrote:
> Im trying to edit my maptoaction.lua. I understand I cant directly
> edit it but have to copy it to a different folder.
> That folder doesnt exist so I assume I have to create it as well as the
> new maptoaction.lua but it is write protected. Can I change this?
Sorry I
Im trying to edit my maptoaction.lua. I understand I cant directly
edit it but have to copy it to a different folder.
That folder doesnt exist so I assume I have to create it as well as the
new maptoaction.lua but it is write protected. Can I change this?
paul- wrote:
> Install the powersave plugin into LMS
I already tried, but now that I checked the settings, I had not checked
off the "Enable Powersave" ... :-/ Thanks for the response. I'm sure it
will work from now on.
/Claus
Install the powersave plugin into LMS
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
if you
Hi - when I play the last song, I often go into Settings - Sleep - End
of Song.
Is there a way I can setup JiveLite to always go into sleep when the
album or playlist is finished?
I've tried various settings (and saving to SD card) as well as some
plugins in LMS, without luck. Am I just
Hi there
Is there a way, e..g in the Jivelite GUI, that I could read out the
sample rate and possibly also the bit depth that piCorePlayer is
currently feeding to the I2S DAC (i.e. = the device that I have
configured in Squeezelite as my player) ?
P.S. I also have Squeezelite-X installed, and
The "announce" thread for Jivelite is here - you might check if your
problem has already been discussed there.
https://forums.slimdevices.com/showthread.php?98156-Announce-JiveLite-cut-down-squeezebox-control-application
If you do start your own thread for a specific problem - give lots of
lordvader wrote:
> Excuse the spam, but is this a suitable place to ask Jivelite questions
> on platforms other than picoreplayer?
Its easy enough to start a new thread. You obviously knew it didnt
make sense to post here, didnt you? [emoji846]
Michael
http://www.herger.net/slim-plugins
Excuse the spam, but is this a suitable place to ask Jivelite questions
on platforms other than picoreplayer?
Sent from my Redmi Note 4X using Tapatalk
lordvader's Profile:
Jeff07971 wrote:
> Yes steps are correct ! Should work.
>
> You're using latest pCP ? (V4.1 Standard)
>
> I'll give it a try just to make sure v4.1 is OK
>
> Give me 20 minutes or so.
>
> Jeff
You are right Jeff,
I use standart version, everyting is Okay.
Thanks for all. [emoji4]
Jeff07971 wrote:
> OK So burnt a clean SDcard with Balena Etcher of pCP V4.1 Standard
>
> Inserted USB keyboard into Pi and fired it up, when finished booting I
> typed "ooo" as you can see in the screenshot
>
> So its not a problem with V4.1 !
>
> Try this first and see whether
onkal wrote:
> I use 4.1 realtime kernel. When keyboard worked on my first try, then it
> doesnt work.
>
> There is only usb dac (it does not receive power from pi)
>
>
> Tapatalk Pro kullanarak iPhone araclyla
> gönderildi
Try the standard kernel first and disconnect the DAC
*Players:*
Paul Webster wrote:
> Have you rebooted while the USB connection is already made?
>
> Anything useful in dmesg output?
Yes I rebooted.
Tapatalk Pro kullanarak iPhone araclyla
gönderildi
onkal's Profile:
Jeff07971 wrote:
> Yes steps are correct ! Should work.
>
> You're using latest pCP ? (V4.1 Standard)
>
> I'll give it a try just to make sure v4.1 is OK
>
> Give me 20 minutes or so.
>
> Jeff
OK So burnt a clean SDcard with Balena Etcher of pCP V4.1 Standard
Inserted USB keyboard into Pi
Have you rebooted while the USB connection is already made?
Anything useful in dmesg output?
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile:
onkal wrote:
> I clean install of pCP more than one. :(
>
> I write pCP (kernel version) on sd.
> I setup output etc.
> I install jivelite.
> I plug usb keyboard with cable.
> And test.
> But it doesnt work.
>
> Are steps correct?
>
>
Yes steps are correct ! Should work.
You're
Jeff07971 wrote:
> Hi, If picoreplayer is running fine (you can get to the web gui) then
> the most likely is a dead USB keyboard or USB port.
>
> Picore runs out of the box with a (wired) USB keyboard or a Flirc no
> setup is needed on pCP at all for these
>
> I'd try another clean install of
onkal wrote:
> I did these but it doesn't work.
> I connected usb keyboard, it doesn't work too.
> I am doing something is wrong. :(
Hi, If picoreplayer is running fine (you can get to the web gui) then
the most likely is a dead USB keyboard or USB port.
Picore runs out of the box with a
Jeff07971 wrote:
> You understand that Flirc emulates a keyboard right ?
> https://support.flirc.tv/hc/en-us/articles/203689115-What-is-Flirc-
>
> You then program the Flirc with the flirc programmer software
> https://flirc.tv/downloads
>
> Edit: I use windoze for this
>
> You then need to
onkal wrote:
> Hello, I want to use flirc on picoreplayer (pi 3b) but I don't setup it.
> How must I do? I know very little linux info. :(
>
> Usb keyboard plugged into the picore when I tried. The keyboard worked
> when I first plugged it but it didn't work after 5 minutes. I couldn't
> run
Hello, I want to use flirc on picoreplayer (pi 3b) but I don't setup
it.
How must I do? I know very little linux info. :(
Usb keyboard plugged into the picore when I tried. The keyboard worked
when I first plugged it but it didn't work after 5 minutes. I couldn't
run it after him. I
Paul Webster wrote:
> Maybe you could set-up your phone as an access point ... and then
> configure that into your RPi as an alternate network ... and then use
> SSH client on the phone to connect into RPi and edit the config file to
> add in the new connection details ... save to SD ... reboot
Maybe you could set-up your phone as an access point ... and then
configure that into your RPi as an alternate network ... and then use
SSH client on the phone to connect into RPi and edit the config file to
add in the new connection details ... save to SD ... reboot RPi.
Messy but could work
yeah thanks, Paul! I didn't know that and it seems very helpful for
known wifi networks.
I am running picoreplayer on a portable system and quite often I do not
know the wifi credentials before I leave my home.
The problem is that I normally do not have a keyboard with me to
configure the
paul- wrote:
> You can create both networks in your custom wpa_supplicant.conf...it
> will then automatically select.
That is very cool. Nice 1.
rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 +
HiFiBerry DAC+ | Squeeze Box Touch | LMS + XPenology on HP Gen 8 |
You can create both networks in your custom wpa_supplicant.conf...it
will then automatically select.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
You could personalise the SD card.
See
https://www.picoreplayer.org/how_to_setup_wifi_on_pcp_without_ethernet.shtml
I've not tried this on one that has already been set-up - i.e. to change
the WiFi details but if the file remains on the boot partition and is
actioned from there (even if copied
I am using picoreplayer and Jivelite a lot and I think its great work!
Many thanks to Paul, Steen, Ralphy and Greg!!
For me it does not seem possible to enter the wifi credentials through
Jivelite directly. Please correct me, if I am not right.
I am using the official pi 7" Display for the
@Jeff07971 and @mherger
Many thanks and a bit of a rookie mistake on my part. It works perfectly
now.
poing's Profile: http://forums.slimdevices.com/member.php?userid=63617
View this thread:
On my Pi Zero, only skins up to 720p work, the Full HD skins (both
regular and grid) don't. Is that because the Zero is underpowered?
Basically, I am thinking of hooking up a Pi 3 to my AV setup instead,
hoping it would be powerful enough for 1080p.
You'll have to modify the framebuffer
poing wrote:
> Just a quick question...
>
> On my Pi Zero, only skins up to 720p work, the Full HD skins (both
> regular and grid) don't. Is that because the Zero is underpowered?
> Basically, I am thinking of hooking up a Pi 3 to my AV setup instead,
> hoping it would be powerful enough for
Jeff07971 wrote:
> As others have said Jivelite IS the controller that sends control
> signals via IP to the server.
>
> To do control of the central player at each TV location you could just
> have a Pi + Screen running Jivelite set to monitor the central player.
>
> I'm relatively sure you
trans_lux wrote:
> Yes, I was asking if I could do this via IP but this appears to not be
> possible. I have everything in place for IR I just need to learn the
> codes into the control system.
As others have said Jivelite IS the controller that sends control
signals via IP to the server.
To
Jeff07971 wrote:
> So Jivelite runs on the centralised player and you distribute the OSD to
> all the TVs in the house ?
>
> And you want to be able to control the central player from any TV
> location ?
Yes, I was asking if I could do this via IP but this appears to not be
possible. I have
Greg Erskine wrote:
> hi trans_lux,
>
> Are you using the right termology? Jivelite is the screen display
> software, usually working on RPF 7" touch screen. Jivelite is controlled
> via the touch screen, a keyboard or IR, but you would expect to be in
> front of the screen to see what's
hi trans_lux,
Are you using the right termology? Jivelite is the screen display
software, usually working on RPF 7" touch screen. Jivelite is controlled
via the touch screen, a keyboard or IR, but you would expect to be in
front of the screen to see what's happening.
regards
Greg
mherger wrote:
> > I currently have limited IP control and feedback of any squeezebox
> > player, hardware or software based. I want simple dnav and transport
> > control of Jivelite for use with a handheld remote. Iâm just going
> to
> > use IR.
>
> I think you're not getting my point: do
Greg Erskine wrote:
> hi fredall,
>
> How deep into this do you want to go?
>
> First you need to understand the basics of Tiny Core Linux, then learn
> about (re)creating extensions.
>
> Personally, I don't think it is worth the effort.
>
> http://distro.ibiblio.org/tinycorelinux/book.html
I currently have limited IP control and feedback of any squeezebox
player, hardware or software based. I want simple dnav and transport
control of Jivelite for use with a handheld remote. I’m just going to
use IR.
I think you're not getting my point: do you really want to be able to
navigate
mherger wrote:
> > Sorry if this has been asked but is it possible to control Jivelite
> via
> > IP or a browser?
>
> Do you really want to control Jivelite, or the music playing? Jivelite
> is a controller to control playback. The latter could be done using IP
> (CLI or JSON/RPC calls). But
hi fredall,
How deep into this do you want to go?
First you need to understand the basics of Tiny Core Linux, then learn
about (re)creating extensions.
Personally, I don't think it is worth the effort.
http://distro.ibiblio.org/tinycorelinux/book.html
Alternatively, it might be easier to
Hello and first thank you for the great work in PiCorePlayer.
I have installes version 4.0 and added Jivelite. I could load a custom
wallpaper to .Jivelite/userpath/wallpapers
But to get the configuration simpler I would like to remove the original
Wallpapers from Jivelite
I could delete the
Rnee wrote:
> @Jeff07971: Thanks that did the trick! Did not notice that option and
> was wondering how settings would be saved.
> Of course I meant that Jivelite asked for the language settings every
> time and lost it's settings.
> It's pcp4.1 indeed, saw that version n° somewhere in the
@Jeff07971: Thanks that did the trick! Did not notice that option and
was wondering how settings would be saved.
It's pcp4.1 indeed, saw that version n° somewhere in the diagnostics
screen and thought it would indicate more specifically what I'm
running.
Is there some sort of detailed user
hi Rnee,
Sounds like you need to do a backup to save your settings.
Jivelite has a backup option.
The pCP web interface has a backup [Button] in [Advanced] mode.
If you are familiar with ssh, you can do a $pcp bu.
Also, pretty much "most" of the [Save] buttons on the pCP web interface
will
Hi guys.
I just got a 7" touchscreen and started using Jivelite.
It took some time to get LMS working because I kept getting the wizard
over and over again.
So now LMS runs fine but the Jivelite wizard keeps popping up at every
reboot.
Can anyone please help me with this?
System: RPi 3B -
Sorry if this has been asked but is it possible to control Jivelite via
IP or a browser?
Do you really want to control Jivelite, or the music playing? Jivelite
is a controller to control playback. The latter could be done using IP
(CLI or JSON/RPC calls). But controlling the controller is
Sorry if this has been asked but is it possible to control Jivelite via
IP or a browser?
My use case is I have a picoreplayer connected to a video distribution
system located in a rack in the basement.
I currently have LMS integrated with Crestron IP control using an old
Controlworks module but
I just want to share how I managed to let jivelite show (all?) special
characters as I experienced some issues with it.
I hope it might be helpful for others as well
I have a specific album of 'Sieg über die Sonne' which is called '1
'. While all my squeezeboxes and the server website show the
I just want to share how I managed to let jivelite show (all?) special
characters as I experienced some issues with it.
I hope it might be helpful for others as well
I have a specific album of 'Sieg über die Sonne' which is called '1
'. While all my squeezeboxes and the server website show the
Thanks again, the procedure worked fine and re-familiarised me with some
basic terminal commands from years ago.
Very happy, sorry for being unspecific earlier.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS 7.9.2 on Pi 3B piCorePlayer v4.0 Server/IQAudio
Digi+
Thanks for all your help.
Looks like I can take it from here.
I have to break for a while but I think I'll be able to do it from here.
Thanks again.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS 7.9.2 on Pi 3B piCorePlayer v4.0 Server/IQAudio
Digi+
*Homeplug &
I'm not in front of my pCP right now - but I think it still should be
possible using the method described by Ralphy here:
https://forums.slimdevices.com/showthread.php?104608-Preparing-for-my-players-demise=835855=1#post835855
So in short:
First choose a VU-meter from pCP web-page.
Backup
Copy your VU meter file to
/home/tc/.jivelite/userpath/applets/JogglerSkin/images/UNOFFICIAL/VUMeter/vu_analog_25seq_w.png
Backup your configuration
Reboot
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio
'Squeezebox client builds'
That didn't work either Michael.
You'll have to be more explicit if you want us to help you. "that didn't
work" just is not enough information to make any sense. What did you
try? How did it fail? Error messages you got?
--
Michael
___
unix
That didn't work either Michael.
I've PM'd Ralphy. Hate to bother him when he does so much for the
community but I have tried.
And of course the same to you too.
Ian
A very happy 13 year user of Slimdevices, Logitech Devices and pi and
UPNP devices.
Keep up the good work.
*Music Store &
I don't seem to be able to ssh in there as root using "sudo /bin/sh".
do "sudo su" instead.
--
Michael
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
I don't seem to be able to ssh in there as root using "sudo /bin/sh".
Still permission denied.
My terminal command usage is very rusty.
Ralphy, if I PM you the png would you mind including it in the list of
VU meters?
Uploading it to this forum seems to change it to a jpg so maybe email
Using either Filezilla or Putty with tc user and piCore password
And where do you try to put it? That file likely is just a link to write
protected area in pCP. You'd have to ssh in there, remove the link, and
replace it with your file as root. The tc user won't have permissions to
do this.
Using either Filezilla or Putty with tc user and piCore password
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS 7.9.2 on Pi 3B piCorePlayer v4.0 Server/IQAudio
Digi+
*Homeplug & LAN Players: *Squeezelite on Windows 10 PC
*UPNP Wifi Players:* Samsung Soundbar,
I've created a replacement VU meter animation frieze for the Kolossos VU
meter for my Stereo Console re-purposeing project but keep getting
"permission denied" when trying to upload it to piCore to replace the
How do you try to upload?
--
Michael
I've created a replacement VU meter animation frieze for the Kolossos VU
meter for my Stereo Console re-purposeing project but keep getting
"permission denied" when trying to upload it to piCore to replace the
Kolossos frieze (suitably renamed). Is it possible to simply replace it
in this way
The main unit's away having the top "French Polished" (don't know how
that translates, particularly into French). It had suffered some usage
marks in it's 56 year history.
The top of the unit is made from two solid walnut panels each about 18mm
thick 1800mm long and 230mm wide. If you had to
That looks really good ian :thumbsup:
Imagine if you had to do left and right channels !!
hehehe.
It would be nice to see a build log of the entire unit too
rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 +
HiFiBerry DAC+ | Squeeze Box Touch | LMS + XPenology on HP Gen 8
Learn't how to do one. The learning took a couple of hours.
25892
Could still stand slight back-lighting improvements but not bad for a
septuagenarian.
Now for the other 24!
+---+
|Filename: base2.png
Not sure if kellossus is still active on the forums ...
But you could always try messaging them and see if they have some
overlays and raw background elements
It must be time consuming but doable.
Good Luck
rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 +
huxmut wrote:
> Lets us know what you find :)
Thanks for the hint huxmut, I should be able to take it from there.
I found the image file: vu_analog_25seq_w.png at
/opt/jivelite/share/jive/applets/JogglerSkin/images/UNOFFICIAL/VUMeter
which is series collage view of the base image 350 x 400
I think back in the pCP 1.22 thread (?) there was much discussion on the
meters, but the real answer lies in the jivelite thread
https://github.com/ralph-irving/jivelite/tree/master/share/jive/applets/WQVGAsmallSkin/images/UNOFFICIAL/VUMeter
Have a look at the analogue sequences for an idea
Thanks Michael,
I'm familiar with the Open Source version of photoshop (GIMP) but I
don't have a starting point or any idea where to put a modified image.
Hope someone familiar with the process might join the thread.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS
Is there any way I can change the text in the Kolossos VU meters to Read
"RCA SHC888 Console 1962"?
You'd likely have to modify an image file (png). Can certainly be done
somehow.
--
Michael
___
unix mailing list
unix@lists.slimdevices.com
Hi
I'm re-purposing/refinishing an enormous RCA solid walnut stereo console
with modern amps, piCore Player/Server and a 13 inch Jivelite Display
Panel with remote.
Is there any way I can change the text in the Kolossos VU meters to Read
"RCA SHC888 Console 1962"?
Did you ever see the film
paul- wrote:
>
> Screenblank will only work with the Official RPI display.
Thanks Paul, some disappointment with hardware here :/
And still a question remains :)
I can see there is screensaver for Playing state and for Paused state.
My simple remote switches between *Off* and Playing states
Anytime you make changes, you need to backup settings from any of the
following methods
1) Jivelite piCorePlayer applet
2) pCP web interface
3) SSH session by running "pcp bu"
Screenblank will only work with the Official RPI display.
piCorePlayer a small player for the Raspberry Pi in RAM.
Hello
Another issue:
After adding jivelite.sh in tce, jivelite seems to not persist settings
- after each reboot I have select language etc anew.
Also, settings for Sleep mode or screenblanker do not work.
I suspect jivelite has now issues wit saving settings (???).
Any advice?
Hello,
How do I pass environmental variables to jivelite? I've found
suggestions to update jivelite.sh, but no working tutorial for this.
My problem:
https://forums.slimdevices.com/showthread.php?109619-Touch-off-with-Jivelite-Waveshare-5-quot-on-piCorePlayer
mherger wrote:
> Would you have another Pi to set pCP/Jivelite up with? You then could
> copy all of ~/.jivelite to the Pi Zero. That's where all of the settings
>
> are stored.
>
Michael, many thanks!
This is the solution I was looking for. I couldn't image otherwise. It's
a *nix box,
Would you have another Pi to set pCP/Jivelite up with? You then could
copy all of ~/.jivelite to the Pi Zero. That's where all of the settings
are stored.
--
Michael
___
unix mailing list
unix@lists.slimdevices.com
See if you can borrow a USB hub from a friend, relative, next door
neighbour or co-worker.
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread:
Sorry if the question is redundant (I searched this thread trying
various keywords and also did some google searches).
I have a Pi Zero (non-W). As is standard, it's set up using a wifi
dongle hooked up via a USB OTG adapter. I installed Jivelite in pcp
4.0.0 but can't get through the initial
paul- wrote:
> what is your goal? What action are you triggering?
>
> You can do whatever you want with a script, and load it in the user
> commands section of the tweaks page.
I am revisiting the idea of a script to toggle a GPIO pin when the
player goes into a quiescent state. The reason
Jeff07971 wrote:
> I have used "PowerSave" and the GPIO to control my poweramp(s) since
> before it was an integral part of pCP (a good few years).
> This would be thousands of on/offs (at least 3 per day) and not once
> have I had the GPIO not turn of the amps.
>
> Jeff
PowerSave has
user wrote:
> Where is do_rebootstuff.sh in version 4.0? Can't find it in
> /home/tc/www/cgi-bin/
> thanks!
Hi user,
It was renamed to pcp_startup.sh in pCP4.0.0
regards
Greg
Greg Erskine's Profile:
Where is do_rebootstuff.sh in version 4.0? Can't find it in
/home/tc/www/cgi-bin/
thanks!
user's Profile: http://forums.slimdevices.com/member.php?userid=68513
View this thread:
wtnh wrote:
> Well, this may be a big "nevermind" on my part. I am using a GPIO pin to
> toggle a relay which switches out a battery for my DAC when piCorePlayer
> is quiescent or shut off by LMS using the PowerSave plugin.
>
> When the player is active, the battery is switched in and powers
paul- wrote:
> what is your goal? What action are you triggering?
>
> You can do whatever you want with a script, and load it in the user
> commands section of the tweaks page.
Well, this may be a big "nevermind" on my part. I am using a GPIO pin to
toggle a relay which switches out a
what is your goal? What action are you triggering?
You can do whatever you want with a script, and load it in the user
commands section of the tweaks page.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
I would like to create a custom script (loaded by piCorePlayer) to
detect when Jivelite activates DisplayOff, or (better yet) simply check
periodically check to see what state the display is in.
Are there any hooks in the code which would enable this?
Thanks
Whit
Jeff07971 wrote:
> Some one has indeed had a simillar issue though reversed here
> https://forums.slimdevices.com/showthread.php?108852-Announce-piCorePlayer-3-5-0=918449=1#post918449
Yes, that would be me, but I didn't upgrade to version 4.0. Doing some
research it may be due to overscan,
Jivelite will not use the files in /home/tc/Clock/
You can delete that folder.
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio
'Squeezebox client builds'
(https://sourceforge.net/projects/lmsclients/files/) 'donations'
Greg Erskine wrote:
> hi Jeff07971,
>
> https://www.picoreplayer.org/pcp_cli.shtml
> https://www.picoreplayer.org/pcp_aliases.shtml
>
> I should mention we can add more commands on request. :)
>
> regards
> Greg
Thanks Greg,
Jeff
*Players:* SliMP3,Squeezebox3
hi Jeff07971,
https://www.picoreplayer.org/pcp_cli.shtml
https://www.picoreplayer.org/pcp_aliases.shtml
I should mention we can add more commands on request. :)
regards
Greg
Greg Erskine's Profile:
paul- wrote:
> Jeff,
>
> I guess I should read our own codelol. I always do a pcp bu, then a
> pcp rb...just so I can follow along.Anyway, yes, you want to
> patch the file in /home/tc/.jivelite..
>
> Paul
@Paul
Lol, yes, I always used to do a "pcp bu" then "pcp rb"
Jeff,
I guess I should read our own codelol. I always do a pcp bu, then a
pcp rb...just so I can follow along.Anyway, yes, you want to
patch the file in /home/tc/.jivelite..
Paul
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
It's working for me on 4.0.0-b5
Would you check if the modified files are saved in the backup file?
Code:
ceo
tar -tf mydata.tgz | grep Clock
home/tc/.jivelite/userpath/applets/Clock/
home/tc/.jivelite/userpath/applets/Clock/ClockApplet.lua
paul- wrote:
> Nothing changed that should affect what you are doing.I think you
> are patching the wrong file.
>
> Should you not be patching
> /home/tc/.jivelite/userpath/applets/Clock/ClockApplet.lua
This is a possibility but I was just following Ralphys method in this
post ' #709'
Nothing changed that should affect what you are doing.I think you
are patching the wrong file.
Should you not be patching
/home/tc/.jivelite/userpath/applets/Clock/ClockApplet.lua
And the backup command is pcp bu, not pcp br. Is that just a typo
here on the forums?
piCorePlayer a
Some time ago on this thread
https://forums.slimdevices.com/showthread.php?103330-Jivelite-for-piCorePlayer=886490=1#post886490
I asked about unblanking the leading zero in 24hr Clock screensaver.
This all worked fine but now I have a clean install of Pcp 4.0.0B and
the method does not seem to
Dreddguy wrote:
> > d6jg wrote:
> > [image:
> > http://uploads.tapatalk-cdn.com/20160707/9fe5bf04cb817a244382dde5985c29b1.jpg]
> >
> > O2 Joggler flashed with SQ OS and a mod to VU meters
> >
> > This looks fab. Exactly the setup that I would like on my Joggler. I'm
> > running Max2Play on
d6jg wrote:
> [image:
> http://uploads.tapatalk-cdn.com/20160707/9fe5bf04cb817a244382dde5985c29b1.jpg]
>
> O2 Joggler flashed with SQ OS and a mod to VU meters
>
> This looks fab. Exactly the setup that I would like on my Joggler. I'm
> running Max2Play on my RPI's. Are These vintage looking
601 - 700 of 1510 matches
Mail list logo