you need is described in the release notes from 9.x onwards
> > >
> > > Removing the command quit is not the solution
> > >
> > > use this, it is copied from the release notes:
> > >
> > > on closeStack
> > > if the environment
ompleted. REALLY?
> Whatever! Now that I know that "feature", I can live with it.. but I bet
> THAT characteristic *isn't*
> described in the release note(s).
>
> Thanks again for your help!
>
> Doug
>
> > Date: Fri, 1 Nov 2019 19:20:04 +0100
> > Fro
e
completed. REALLY? Whatever! Now that I know that "feature", I can live with
it.. but I bet THAT characteristic *isn't* described in the release note(s).
Thanks again for your help!
Doug
> Date: Fri, 1 Nov 2019 19:20:04 +0100
> From: JJS
> To: Douglas Ruisaard via use-livecode
&g
he stack or card, I put this:
>
>put the environment is "development" and \
> there is a stack "revStandaloneProgress" and \
> the mode of stack "revStandaloneProgress" > 0 into skipLogin
>
> if not skipLogin then
>--
This has happened a few times before... the following message never got posted
to " use-livecode@lists.runrev.com". Can you explain why? It must have
gone somewhere because Giovanni Cannizzaro [johnthejoc...@yahoo.it] responded
but I certainly can see how *he* saw it but no one else
I am having an issue with using "any" business version of 9 (9.04, 9.05,
9.5-32bit, 9.5-64bit) to generate a standalone output of my application. I am
using Windows 7 Enterprise SP1 and have tried building the identical script
(with the same result) on two different installations of said OS on
Opps.. correction to: "... When I look at the graph of this function using a
"k" value of 5 and above, I *thinK* it starts to simulate your desired
mapping"
That should read " ... When I look at the graph of this function using a 'k'
value of 3 down to close to zero I *think* starts to
Ralph:
Although several persons have responded... most far above my "pay-scale" ...
Your mention of the audio taper rang bell for me. In the process of simulating
an analog audio potentiometer using a digital one... I needed to find a formula
for an inverse audio taper... and it DID take a
I *REALLY* appreciate the responses! Beyond where (exactly) LC actually
generates this message (I can see it in the LC executable in a large "look-up"
table), I was hoping I could find it in a "read-able" script so I could trace
the logic.
I'm trying NOT to exceed the scope of a subject
Let me start this off by stating that the information I am seeking IS NOT due
to an *issue* with LC. Hopefully, I can make it clear why I am asking for
assistance from this group in regard to the situation I am trying to deal with
and why I need the LC expertise of this group as a resource.
ate the explanations.
Douglas Ruisaard
Trilogy Software
(250) 573-3935
>
> On 10/27/18 10:26 AM, Douglas Ruisaard via use-livecode wrote:
> > If that's true then there's (sigh!) one more reason to stay away from LC
> > v9... but I really don't
> understand the reason why this
ckground
> preOpenCard
> ...etc
> openStack
> openBackground
> openCard
> ...etc
> closeStack
> closeBackground
> closeCard
> ...etc
>
> I understand why this is necessary now, but it is pretty instrusive, is going
> to bite a lot of people,
> and clutters up scri
://www.hyperactivesw.com
> On October 25, 2018 11:49:36 AM Douglas Ruisaard via use-livecode
>
> wrote:
>
> > thanks for the reply... as I mentioned, the location/sizing thing was
> > the less important issue. I didn't explain the standalone issue well
> > enough
Brilliant!!! ... works perfectly when combined with a "set loc" and "set rect"
call. Doesn't touch the standalone settings!
Thanks so much!
Douglas Ruisaard
Trilogy Software
(250) 573-3935
>
> Hi,
>
> does this help?
>
> revIDETogglePalette "Project Browser"
>
> you can test if the
to my app working!)
So, the issue was not DIRECTLY involved with the "generation" of the
standalone, it was the issue that using this call set the standalone setting
back to a "new-stack" default!
Douglas Ruisaard
Trilogy Software
(250) 573-3935
>
> On 10/24/2018 02:10 P
I'll drink to THAT!! .. but then again, I'll drink to almost anything! ...
coffee... what were you thinking?
but seriously, it's a fine idea... particularly as I got blind-sided by finding
an irrelevant inclusion (JSON Library) when I needed the mergJSON one and
the inclusions are NOT even
... Back to using the LC tools option.
thanks!
Douglas Ruisaard
Trilogy Software
(250) 573-3935
> Hi Douglas,
>
> > Am 23.10.2018 um 20:31 schrieb Douglas Ruisaard via use-livecode
> > :
> >
> > Is there a way to start/open the "Project Browser" (from the
Is there a way to start/open the "Project Browser" (from the main LC Tools
menu) using a script command for LC v8 and above?
It used to be (possibly v7 or before) that the stack retained the "state" of
the Project Browser and would automatically display it when a stack was opened
if the stack
k i remember there was a problem with
> > including that library when ?searching for inclusions? was selected in the
> > SB settings.
> >
> > Regards,
> > Matthias
> >
> >
> > Matthias Rebbe
> >
> > free tools for Livecoders:
> > https://i
bbe
>
> free tools for Livecoders:
> https://instamaker.dermattes.de <https://instamaker.dermattes.de/>
> https://winsignhelper.dermattes.de <https://winsignhelper.dermattes.de/>
> > Am 22.10.2018 um 00:45 schrieb Douglas Ruisaard via use-livecode
> > <mailto:us
Has anyone recently tried to create a standalone app which includes either a
jsonImport or JSONToArray call?
While my code works perfectly when run within the LC API, once a standalone is
produced, it chokes on either one of these calls. I've reduced the code to
its bare essentials. A
.json;, "DELETE",
> > tHeaders, "transferComplete",
> > tFormData) intotResult
> >
> > *end*mouseup
> >
> > *on*transferComplete pID, pResult, pBytes, pCurlCode
> >
> > *local*tData, tHeaders, tResult, rError
> >
> > *if* pCurlCode
t;
> > *end*mouseup
> >
> > *on*transferComplete pID, pResult, pBytes, pCurlCode
> >
> > *local*tData, tHeaders, tResult, rError
> >
> > *if* pCurlCode isnot0*then*
> >
> > *put*tsNetRetrError(pID) & crafterfld"output"
> >
"& tData & crafterfld"output"
>
> *put*"Headers"&& tsNetRetrSentHeaders("1", rError) & crafterfld"output"
>
> *put*tResult & cr& tHeaders & cr& pResult & cr& tData afterfld"output"
>
I'll start by apologizing for my abysmal familiarity with HTTP, JSON, and URL's
... I'm hoping someone will have pity and give me a hand!
I am trying to send a "command" to a ThingSpeak channel, which is very
successfully receiving data from a simple little ESP8266 module. Periodically,
I
?Dave or Doug? ... anyway. It sounds like a "known" problem then I tried
searching the QC listing at Livecode's (http://quality.livecode.com/) but can't
find any reference to that specific function and too much when looking for
"socket" and "domain". Do you know if a bug submission has
18, 2018 at 10:30 AM Douglas Ruisaard via use-livecode
wrote:
Geoff...
Excellent tool but I can't seem to get it to display one of the "cards" of a
Data Grid template. In a "standard" DataGrid Form object, Card Id's 1002 and
1005 are created.
According to the LC Proj
and use
send" a dummy request to test the connection.
Cheers!
Douglas Ruisaard
Trilogy Software
(250) 573-3935
> From: Mark Wieder
> To: Douglas Ruisaard via use-livecode
> Subject: Re: Socket questions
> Message-ID:
> Content-Type: text/plain; charset=utf-8; format=flowed
Experimenting with sockets in LC .. Windows 7 Pro, LC v8.1.9. I have tsnet
working fine in another project but tsnet appears to be primarily for "sending"
stuff (sorry for the technical jargon). Of course, tsnet can read after it
sends a request. However, sockets let me simply open and
I'm always happy to see the Bluetooth topic "revived" for another exposure on
this forum... since I also am quite interested in it.
I have been VERY successful in using the mergBLE library in LC for IOS (but it
takes some getting used to) ...
Unfortunately, it is exclusive to IOS which leaves
Geoff...
Excellent tool but I can't seem to get it to display one of the "cards" of a
Data Grid template. In a "standard" DataGrid Form object, Card Id's 1002 and
1005 are created.
According to the LC Project Browser, which identifies iconically and
positionally the "Data Grid Template
Not exactly an LC question... but relevant to this group...
When I try to use the link:
http://www.google.com/advanced_search?q=site:lists.runrev.com
with ANY choice of "last update"... the search NEVER finds anything... no
matter what word(s) I use in the "all these words" or "this exact word
using LC Business v8.1.9 on Windows 7 Pro and/or LC Business v9.0 on Mac 10.12.6
in the Message Box, put:
put " put x into y" into x; put
matchText(x,"^\s(put)?((?!into).)*$")
produces "false"
in the Message Box, put:
put "put x" into x; put
OK.. the light bulb FINALLY went on .. I'm slow but, like the tortoise, I
eventually "get there" (usually). For some reason Brian's reply made me
re-think how I could fetch the WiFi info query from *each* row, submit it to
tsnet and then update each row in realtime. I know, I know... that's
Ah ... I think I can answer this. Basically, you don't *have* to code the
"Layout Control" beyond the recommended:
set the rect of graphic "Background" of me to pControlRect
and even that may be, technically, optional.
The handler is there (I believe) as a method by which you can
Many thanks to one and all for the interesting responses ... particularly to
Zryip for the extensive reply!
I may be coming at LC from a somewhat unusual direction. The vast majority of
my programming background was in very large, distributed servers running
dedicated medical applications and
Thanks very much for the reply.
Good question .. made me think about why that won't work very well for me (but
it would, of course, work).
The button on each row not only queries the associated wi-fi module, but the
"mouseUp" handler in the Behavior Script acquires a response back from each
The more you understand a task, the more versatile and appropriate any given
tool becomes.
I think the biggest struggle for me is finding examples which are "close" to my
own goal. I have no problem reverse engineering code... I've done it for a
very long time. But unless the outcome
I sent a badly constructed message with this content (more or less) a few days
ago. I am re-posting it in the hope that anyone who tried to decipher those
two messages will give this another consideration.
So pardon the repeat, but I'm quite sure someone from this group can lend me a
hand on
I concur with Brahmanathaswami that, in particular, datagrid forms (I haven't
worked with tables (yet)) are very finicky with regard to scrolling. I still
would greatly appreciate some help with a recently submitted message to this
group, Subject:
datagrid form question
Once you play around
I realized belatedly that I didn't do a very good job (at all) of describing
what one of the row's in my grid looks like... it may be relevant to a solution.
Each row has 1 checkbox, 3 fields and 2 buttons.
One of the buttons (the one I need assistance with), named "Query" calls a
"tsnet"
Using LC v8.1.9 on Windows 7 pro
"Where" do I send a "mouseup" message on a datagrid form which has scrolled
lines... i.e.:
send "mouseUp 1" to
I know it sounds like a ridiculously simple question (and likely is) but a
datagrid form seems to create a "Row Template" group for each
Bob...
Wondering if you would post the windows-version of this technique again... or
copy it to this forum, ideally?
The dropbox entry I can find is expired.
> Subject: Re: Checking if internet is connected using tsNet?
>
> And don't forget my telnet technique. Telnet will tell you if there
10.7.5
>
> 2. I have no money to buy a newer machine.
>
> Richmond.
>
> On 10/7/2018 10:06 pm, Douglas Ruisaard via use-livecode wrote:
> > Sorry if I missed something.. but, Richmond (or anyone, for that matter),
> > could you elucidate on the
> specific
Sorry if I missed something.. but, Richmond (or anyone, for that matter), could
you elucidate on the specifics of which systems confine you to LC v8? Or at
least which systems YOU employ which are not compatible with LC v9...
If there are such systems or a list of known incompatibilities
To help determine if Brian's suggestion is occurring, you could put the
following line in your "self perpetuating" code (assuming you're not running
the code on a Mobile device which have no "messsage box") just before the
"send... in x time ":
put the pendingmessages
If you see ANY output,
Sorry, I sent the previous message with the WRONG subject line please
replace it with this one...
Cam ... would you please provide the specifics on the serial to Bluetooth
device you're referring to?
Make / model/ etc. for my needs, it has to be a serial to BLE device ...
which there
Cam ... would you please provide the specifics on the serial to Bluetooth
device you're referring to? Make / model/ etc. for my needs, it has to be a
serial to BLE device ... which there is at least one from:
http://www.usconverters.com/bluetooth-smart-low-energy-rs232-serial
I'm designing a
Cam .. you mention that you have Windows working with LC "over USB and
*Bluetooth*" ...??? Really? Can you describe more details about using
Bluetooth / Windows / LC? As far as I know, the ONLY implementation for
Bluetooth from LC is Monte Goulding's "mergBLE" which exclusively runs on iOS.
While I agree that the Java "install" is not necessarily a true bug in LC, is
there a reason why LC could not "host" the "current" working set of install
files? ... and (can you imagine???) even semi-automate the installation
process when the user chooses to employ EITHER iOS or Android?
I
ct of LC development.. but willing to learn.
Douglas Ruisaard
Trilogy Software
(250) 573-3935
> On 6/10/18 10:44 AM, Douglas Ruisaard via use-livecode wrote:
> > Apple, if it isn't known, requires you to sell your first-born, sign a
> > contract in blood and then
> embed a
Thanks, Tom ... got a chuckle out of your reply! To be fair, Erik Beugelaar
*did* reply back on April 24 (I must have missed it) and suggested looking into
Jave FFI (supported by LC v9) for possible methodologies. I have NO CLUE
regarding Java... and, cynical as it may be, I don't expect to
Sorry if this is a repeat but I have not seen any replies to my previous query
from April 19 ("Android assistance / information?")
This query is likely to need someone in this community as versed in Android as
Monte Goulding is in iOS. One of the beauties of LC is its cross-platform
ability.
Since I do not create the stack as a "modal stack" (a command I didn't even
know existed... again, thanks for THAT), then does that make my card (only one
in the app) a "system" window? After read the doc's on "modal stack", I doubt
that I want my stack to become "modal"... even temporarily.
no apologies necessary... you got it completely right!... Unfortunately your
idea doesn't work in Windows 7 and/or in LC v 8.1.9 (I've removed v9 for the
time being, so it isn't available to try your idea).
The LC window remains "behind" any other window which I have made the top-most.
browser of whatever happens to be in front, so no clue why it won't work
> for you. (unless the
> window that it is behind is a system window itself)
>
> On Wed, May 9, 2018 at 3:34 PM, Douglas Ruisaard via use-livecode <
> use-livecode@lists.runrev.com>
> wrote:
>
Thanks, Mike... but this doesn't make my LC screen active... it does flicker it
but leaves it in buried under the top window.
I'll check out those links, Lagi... thanks for the research
Thanks to Bob und Klaus for the "Launch" suggestion ... however, I don't want
to open, launch or startup
Thanks, as always, for the responses. Getting old means you forget about the
differences between Commands and Functions... but anyway
My MAIN question was whether there was a way to get LC to make a desktop window
THE active, top-most window... next necessarily the LC's window (in my case)
but
In Windows 7, LC v8.1.9
Is there a way to make an LC "window" the active / top window on the desktop
after making another window on the desktop active? I have an app which allows
me to copy a portion of text from, say, a Notepad window, into the clipboard.
A timed loop within my LC script
I'd be VERY interested... please, where I can find the demo?
Douglas Ruisaard
Trilogy Software
(250) 573-3935
> Hi all.
>
> I've pieced together a very simple demo stack of my FindBar group if anyone
> is interested. It comes
> with a 100 record sqlite database with a sites table to query
I was intrigued by Roger's reference to "tmAlign and "tmEffects" ... always on
the lookout for tools to make my programming life easier. In the process I
also ran across references to "Omegabudle 2011 for Livecode" ... which sounded
like a GREAT deal. HOWEVER, I cannot find anywhere that I
las Ruisaard
Trilogy Software
(250) 573-3935
>
> Because LiveCode 9 now supports Java FFI, maybe you can find the source code
> in Java how to do this
> and then implement it?
> Just an idea.
>
> Goodluck,
> Erik
>
> On 19/04/18 18:00, "use-livecode o
Anyone is this community as versed in Android as Monte Goulding is in iOS? One
of the beauties of LC is its cross-platform ability. The app I've written in
iOS ports just fine to Android .. at least the user-interactive and data
processing parts do. .. without changing one line of code (and
Actually... I didn't make that association... so thanks for your help in my
previous exploits in mergBLE ... *AND*, of course (as you probably guessed),
your offering this time was spot on!.. I'm still getting a handle on how LC
handles things like background processing. I'm used to having
Monte... or anyone else brave enough to contribute :-) (no colored emoji,
sorry) ...
Is there a way to time out the attempted connection to a BLE device using the
mergBLE functions. I can't seem to find a command which doesn't need a
peripheral UUID ... like "mergBLEConnectPeripheral
, Keith Martin via use-livecode <
use-livecode@lists.runrev.com> wrote:
> On 19 Apr 2018, at 17:00, Douglas Ruisaard via use-livecode wrote:
>
> Next is the significant decrease in the "Ink" choices... I've found
> (by
>> process of elimination) the &qu
I am pursuing another course of action for my iOS USB investigation... in the
meantime, in case I need it, I'd appreciate some assistance with mergeAccessory.
first, the associated doc (api.lcdoc) to mergAccessory is a tad out of date...
referencing LC v 5.5 ... but adjusting for version
I use the Project Browser heavily ... one change in 9.0.0 I definitely DO NOT
like is the "new" way of indicating a "behavior" assignment on an object.
What's with the little oval with a "1" in it??? I used the (previous) line
counts to visually match to the "source" button line counts..
Anyone is this community as versed in Android as Monte Goulding is in iOS? One
of the beauties of LC is its cross-platform ability. The app I've written in
iOS ports just fine to Android .. at least the user-interactive and data
processing parts do. .. without changing one line of code (and
to use
the USB cable. It could be that there is a third party accessory that you can
plug in to do this though. If so you could use mergAccessory to read and write
to it.
Cheers
Monte
> On 16 Apr 2018, at 1:42 am, Douglas Ruisaard via use-livecode
> <use-livecode@lists.runrev.com> wrot
f so you could use mergAccessory to read and write
to it.
Cheers
Monte
> On 16 Apr 2018, at 1:42 am, Douglas Ruisaard via use-livecode
> <use-livecode@lists.runrev.com> wrote:
>
> Now, for the next "component", I'd like to be able to communicate to and from
> the
I've managed, with a lot of help from the community, to get the mergBLE
commands and messages working very well between my LC iOS app and an arduino.
Now, for the next "component", I'd like to be able to communicate to and from
the arduino to and from an iOS device (iPhone or iPad) via a
72 matches
Mail list logo
