Re: How to reserve IPs

as well. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542 tel:+442036030542 | S: +44 20 3603 0540 tel:+442036030540 | M: +447968161581 tel:+447968161581 geoff.higginbot...@shapeblue.com | www.shapeblue.com htp://www.shapeblue.com/ | Twitter:@cloudstackguru https://twitter.com

RE: Problem with SSVM ?

Take a look at this for trouble shooting steps https://cwiki.apache.org/confluence/display/CLOUDSTACK/SSVM,+templates,+Secondary+storage+troubleshooting Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original

Re: Migrating large volumes times out

Hi Ian, I think the global setting you are looking for is copy.volume.wait Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot

Re: Adding Second Zone

snapshots and the cleanest approach would be to add it on day one, or if adding later delete all the snapshots and then remove the exiting secondary storage, before adding the the new one, but that can also be a tricky task. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel

RE: Console Improvements

Have you tried increasing the resources to the CPVM, more RAM and CPU really does improve performance Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Jan-Arve Nygård [mailto:jan.arve.nyg

Re: Xen - Deploying servers from a template

Hi Yuri, Thanks for adding some more detail to the thread. You say that the prepare template api does not work for you, I have not had the same experience so could you share more details and ideally log a jira ticket etc Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603

Re: Xen - Deploying servers from a template

the fix in 4.5.1 Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com | www.shapeblue.comhtp://www.shapeblue.com

Re: Xen - Deploying servers from a template

and will be deleted from Primary Storage. This automatic clean up can be disabled by updating the global setting storage.template.cleanup.enabled Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542 tel:+442036030542 | S: +44 20 3603 0540 tel:+442036030540 | M: +447968161581 tel:+447968161581

RE: XenServer 6.5 - Security Groups

thinking is its related to XenServer 6.5 Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Koushik Das [mailto:koushik@citrix.com] Sent: 21 April 2015 05:26 To: users@cloudstack.apache.org

RE: Netwok offerings

to the Shared Network is mapped to the Guest NIC etc Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Vadim Kimlaychuk [mailto:vadim.kimlayc...@elion.ee] Sent: 21 April 2015 07:07 To: users

RE: XenServer 6.5 - Security Groups

that in my lab and haven't encountered any issues. But note I may not be covering a whole lot of use cases. Any specific issues that you are facing? Somesh CloudPlatform Escalations Citrix Systems, Inc. From: Geoff Higginbottom [mailto:geoff.higginbot...@shapeblue.com] Sent: Monday, April 20, 2015

XenServer 6.5 - Security Groups

Hi, Is anyone using XenServer 6.5 with a Basic Zone with Security Groups, and if so, are you experiencing any problems? Regards Geoff Higginbottom CTO / Cloud Architect [Description: Mail Logo Bottom Align] D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M

RE: XenServer 6.5 - Security Groups

Many thank Somesh Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Somesh Naidu [mailto:somesh.na...@citrix.com] Sent: 20 April 2015 15:55 To: users@cloudstack.apache.org Subject: RE

RE: XenServer 6.5 - Security Groups

FYI we have just re-deployed the environment using ACS 4.4.3 and XenServer 6.2 and now it is all working as expected. We now need to work out if the problem is with ACS 4.5.1 or XenServer 6.5 Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581

Re: How to modify default public traffic vlan id

Is this a test or production system? Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com | www.shapeblue.comhtp

RE: [urgent] not able to start SSVM in new deployment.

You say you used 'pre-setup' but what type of storage is it, NFS, iSCSI, FC etc It looks like the XenServer cannot write to the storage, so have you checked permissions and also confirmed that the XenServer can create files directly on the storage etc Regards Geoff Higginbottom D: +44 20

Re: CS version to work with XenServer 6.5

Hi Vadim, I've brought Rohit in who is better placed to answer these specific questions. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot

Re: unable to find created template

Have you tried setting is as featured so it shows up in the default list. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot

Re: CS version to work with XenServer 6.5

. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com | www.shapeblue.comhtp://www.shapeblue.com/ | Twitter

Re: unable to find created template

Is the template 'featured' or are you logged in as a user from a different account than the account who owns the template so can't see it etc Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel

RE: Virtual Router DHCP

VRs use dnsmasq and dhcpd to provide the DHCP functionality More info here http://www.thekelleys.org.uk/dnsmasq/doc.html Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Vadim Kimlaychuk

Re: Chargeback mechanism for cloudstack

Take a look at Amysta, it's a billing / charge back tool for CloudStack that integrates very nicely into the UI Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot

RE: CloudStack Dev Environment

Take a look at http://shapeblue.com/cloudstack/virtualbox-test-env/ Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: mvs babu [mailto:mvsbabu0...@outlook.com] Sent: 31 March 2015 11:54

Re: CLoudstack 4.5 cannot delete ISO

Hi Ken, I'm sure I've seen this before and I have just updated the DB to mark it as removed/inactive (note newer versions use the status column in the db rather than the removed column) Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603

Re: CS 4.5, remove templates

You need to go to the Zones Tab then delete it from the appropriate zone etc Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot

RE: Short question on basic network zones

Traffic, whilst you do not configure a VLAN for Guest Traffic within CloudStack, you simply either create a Virtual Network or Bond within XenServer and set a VLAN tag, or if using dedicated NIC(s) for Guest traffic, set the VLAN on the Switch Ports. Regards Geoff Higginbottom D: +44 20 3603

Re: Basic networking - Multiple pods for 1 zone

. The Idea is that each POD is a broadcast domain contained within its top of rack switching, and routing of guest traffic between PODs is handled by your core switches. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M

Re: [VOTE] Apache CloudStack CloudMonkey 5.3.1 RC4

Hi Rohit, I like the idea of making settings linked to the profile and not global, but maybe with a set of Global settings that new profiles inherit when they are created etc. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel

Re: [VOTE] Apache CloudStack CloudMonkey 5.3.1 RC4

methodology but I make very heavy use of cloudmonkey scripts and it has not let me down yet. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot

Re: [VOTE] Apache CloudStack CloudMonkey 5.3.1 RC4

Adding in Rohit to answer the CloudMonkey development question Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot

RE: [VOTE] Apache CloudStack CloudMonkey 5.3.1 RC4

+1 Have been using on a daily basis for a number of weeks using both command line and heavily in many different scripts. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Rohit Yadav

RE: Xenserver pool HA in Cloudstack

Hi Yiping, Great suggestion, post had been updated accordingly, thanks for the feedback for helping to improve the article. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Yiping Zhang

RE: Error while Adding xenserver in CS 4.2.1

. The error is making reference to being unable to mount NFS hence my suggestion that it cannot actually mount the NFS Primary or Secondary Storage etc. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message

RE: dedicated-ha-hosts

Hi Ugo, If you configure a Host to be a HA Host, it does not get used for normal VMs and will remain empty until a HA event occurs. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Ugo

RE: Macchinina Template

Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Nux! [mailto:n...@li.nux.ro] Sent: 16 February 2015 18:06 To: Geoff Higginbottom Cc: users@cloudstack.apache.org Subject: Re: Macchinina Template Ok

RE: Cloudstack localization in French/German

Hi Octavian, The CloudStack UI already supports French and German, simply choose the language at the logon screen (it’s the bottom of the 4 boxes) Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message

RE: Macchinina Template

is registered as not requiring HVM so they should still live migrate. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Nux! [mailto:n...@li.nux.ro] Sent: 17 February 2015 17:28 To: Geoff

Re: Cloudstack 4.5 and XS6.5

Are you using Security Groups, if so have you changed xenserver to Linux Bridge rather than OVS. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot

RE: Cloudstack 4.5 and XS6.5

Hi Leandro, I have been testing the latest release candidates of ACS 4.5.0 using XenServer 6.5 and have not been installing any supplemental packages. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original

RE: Macchinina Template

That’s a real shame, would there be any way of installing the Tools manually Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Nux! [mailto:n...@li.nux.ro] Sent: 12 February 2015 10:47

Macchinina Template

http://dl.openvm.eu/cloudstack/macchinina/x86_64/ Regards Geoff Higginbottom CTO / Cloud Architect [Description: Mail Logo Bottom Align] D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot

RE: CS 4.5 Testing on VirtualBox Could not see Public ICON

in Advanced Zones, or Basic Zones with EIP ELB (requires a NetScaler) Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Keerthiraja SJ [mailto:sjkeer...@gmail.com] Sent: 06 February 2015 14:46

RE: Force cleaning primary storage.

@All, Dan has now shared more info on his setup, anyone out there know of any known issues with KVM not cleaning up primary storage. @Dan - can you confirm we are talking about Root volumes and not Data Volumes Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M

RE: Force cleaning primary storage.

If you could also share what these settings are, that would also help Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Dan Dong [mailto:dongda...@gmail.com] Sent: 02 February 2015 16:12

RE: How to external IP for Guest Network

' is required, but it does use DHCP on the VR and not an external DHCP Server. If you still need to run the external DHCP Server, you could use MAC Filtering to prevent conflicts etc. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot

RE: VM status can't be updated after VM is stopped from Hypervisor

Hi Ivan, CloudStack is your Cloud Orchestration engine, its main jobs are to deploy/stop/start VMs etc. The idea is that if you want to stop a VM, you tell CloudStack to stop it, you should not be stopping VMs from the Hypervisor. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20

RE: Removing a host from a cluster and adding it to another

which could cause you problems later on. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Abhinandan Prateek [mailto:abhinandan.prat...@shapeblue.com] Sent: 28 January 2015 05:56 To: users

RE: Removing a host from a cluster and adding it to another

before you put any Client VMs on them as running Clusters with less than three Hosts in production is definitely not recommended. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Kyle Flavin

RE: Removing a host from a cluster and adding it to another

so with very little effort and enjoy a nice hot coffee while it does all the work for you. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Kyle Flavin [mailto:kyle.fla...@citrix.com] Sent

Re: outbound/mask traffic configure

Hi Hollman, You need 4 IPs as there is one for the default Source NAT, then 1 per VM to enable Static NAT. I believe your original request was to enable three VMs to each have a unique IP when they access the Internet. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel

RE: outbound/mask traffic configure

Sorry, wrong terminology You need to use the Static NAT feature and you will need 1 Public IP per VM in addition to the original Source NAT IP, so you will 4 Public IPs in total Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot

RE: outbound/mask traffic configure

Hollman, You can use the source nat feature, this will link each Public IP to a specific VM Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Hollman Enciso R. [mailto:hollman.enc

RE: Hostname and IP address of VMs created from template.

/4.2.0/html/Admin_Guide/append-displayname-vms.html - This setting changes how the MVs are listed on vCenter, and does not influence the VMs Hostname Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message

Re: Hostname and IP address of VMs created from template.

Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com | www.shapeblue.comhtp://www.shapeblue.com/ | Twitter

Re: Using Xen Server and KVM together

. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com | www.shapeblue.comhtp://www.shapeblue.com/ | Twitter

RE: Help! cant perform any operation on VMs

Sonali, Have you tried restarting the VR? Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Sonali Jadhav [mailto:son...@servercentralen.se] Sent: 16 January 2015 08:54 To: users

RE: Help! cant perform any operation on VMs

What state does CloudStack 'think' the VR is in and what state is it actually in? Assuming it is running but CloudStack thinks its stopped, mark it as Running in the DB (table vm_instance), then stop it from CloudStack, and then start it from CloudStack. Regards Geoff Higginbottom D: +44 20

RE: Xenserver pool HA in Cloudstack

Great, and please share your findings on this thread so anyone searching for may benefit later etc Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Yuri Kogun [mailto:yko...@outlook.com

RE: Xenserver pool HA in Cloudstack

Master. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Yuri Kogun [mailto:yko...@outlook.com] Sent: 14 January 2015 11:33 To: users@cloudstack.apache.org Subject: RE: Xenserver pool HA

RE: VM showing half of the provisioned memory.

and then Stop/Start your VMs. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: len.bellem...@alternativenetworks.com [mailto:len.bellem...@alternativenetworks.com] Sent: 14 January 2015 16:43

RE: Xenserver pool HA in Cloudstack

-enabling HA which is a manual process. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Ian Forde [mailto:ifo...@marketo.com] Sent: 06 January 2015 18:38 To: users@cloudstack.apache.org

RE: Xenserver pool HA in Cloudstack

for this configuration. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Yuri Kogun [mailto:yko...@outlook.com] Sent: 07 January 2015 17:06 To: users@cloudstack.apache.org Subject: RE: Xenserver

RE: Xenserver pool HA in Cloudstack

Hi Somesh, I will be addeing appropriate info from this blog into the official CloudStack Install Docs. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Somesh Naidu [mailto:somesh.na

RE: Xenserver pool HA in Cloudstack

Sonali, There have been some changes recently and as luck would have it today I am working on a blog article for www.shapeblue.com covering the correct way to configure HA in XenServer. It's due to go live later today, I'll respond to this thread once it's live. Regards Geoff Higginbottom

Re: How to add new VLAN range for Guest traffic

Amir, Simply add a 2nd VLAN range in the form of a comma separated list. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot

RE: Strange instance boot issue

vCPU @ 200MHz. I believe it's always better to provide a faster single vCPU than multiple Slower vCPUs as there are overheads on the Guest OS and Hypervisor when dealing with multiple vCPUs. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot

RE: Load Balancing Cloudstack Management Servers

network, and NEVER expose to the public internet etc. Regarding NFS, yes, if using multiple Management Servers, they should just be Management Servers and not providing any other services etc Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581

Re: Unable to download CentOS 5.5 nogui (KVM)

Satay, What settings did you use when you exported your NFS for secondary storage? Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot

RE: ACS 4.4.1 network.throttling.rate - Advance Zone- XenServer 6.2

Motty, It’s the vm.network.throttling.rate you need to change OR the Network Rate on the Compute offering your VMs are using. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Motty Cruz

Re: Place Volume Snapshots on a different Secondary Storage

- it's truly random Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com | www.shapeblue.comhtp://www.shapeblue.com

Re: Cloudstack and xenserver 6.2 Pros and cons: openvswitch vs bridge

General rule of thumb is to leave at the default of Open vSwitch if not using Security Groups, and to switch to Linux Bridge if you are using Security Groups (Basic or Advanced) Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel

Re: Stable updated System VM template

There are also updated versions available here http://packages.shapeblue.com/systemvmtemplate/4.3/4.3.1/ Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot

Re: Stable updated System VM template

I consider 4.3.1 as the current stable release and am not currently recommending upgrading to 4.4.x Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot

RE: Place Volume Snapshots on a different Secondary Storage

Suggest that is a question for the Dev List Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Wadia, Yohan [mailto:ywa...@virtela.net] Sent: 28 November 2014 09:30 To: users

RE: Stable updated System VM template

to all our different versions here http://shapeblue.com/packages/ Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Tejas Sheth [mailto:tshet...@gmail.com] Sent: 28 November 2014 09:19

RE: security group and xenserver query

I like to think of Advanced Network with SG as simply multiple Basic Networks, each on its own VLAN. You have the same features (or rather lack of) as you would with a Basic Zone, but you have multiple Guest Networks. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M

RE: security group and xenserver query

If you want NAT and Load Balancing you need to do this on the Physical Device which terminates the VLANs etc (this will be outside of CloudStack) Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message

Re: security group and xenserver query

and if required to front this network with a Load Balancer and Firewall to provide additional services, but you need to manage these devices separately so is not a typical configuration for a Public Cloud, but could be used in a Private Cloud. Kind Regards Geoff Higginbottom CTO / Cloud Architect D

RE: Assign multiple users to a single virtual machine

Tilak, The console proxy feature connects you to the local console session of the VM via the Hypervisor, hence only one connection is allowed. For more than one use to connect to and manage a VM simply use SSH to connect to the VM etc Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44

RE: The Simplest way to Run CloudStack on VirtualBox

An alternative to using DevCloud is to follow this article and deploy CloudStack on VirtualBox using a XenServer Hypervisor http://shapeblue.com/cloudstack/virtualbox-test-env/ It’s a configuration which is very close to a Production setup so perfect for test and demo etc Regards Geoff

Re: Assign multiple users to a single virtual machine

Hi Tilak This is exactly the use case for the Projects feature. As long as the accounts your two users belong to are in the same domain you can create a project and add them both to it. Any VMS created belong to the project and you can add and remove users at will. Regards Geoff

Re: Resize console VM window

Have you installed the Hypervisor tools in your VM Template Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com

RE: Hosts per cluster?

The official line is max 8 XenServer Hosts per cluster, but experience has shown the 'optimum' number to be 6 per Cluster Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: tejas.sh

Re: Feature requests and a feature request: userid field in the vm_instance table

Hi Dave, and welcome to the list. Just looked at your ticket and all looks good to me. I've also voted for it as I've had a couple of other users ask for the same functionality so well done for logging it. Kind Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542 | S: +44 20

Re: Problem of adding XenServer host with only one NIC

You can definitely use a single NIC Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com | www.shapeblue.comhtp

RE: [VOTE] Release Apache CloudStack CloudMonkey 5.3.0 (round #6)

, setup Ingress and Egress Rules Deploy new VPC and VMs, setup ACLs and Egress rules Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Rohit Yadav [mailto:rohit.ya...@shapeblue.com] Sent: 04

RE: [VOTE] Release Apache CloudStack CloudMonkey 5.3.0 (round #4)

of CloudMonkey Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Nux! [mailto:n...@li.nux.ro] Sent: 03 November 2014 11:55 To: users@cloudstack.apache.org Cc: d...@cloudstack.apache.org Subject: Re

RE: [VOTE] Release Apache CloudStack CloudMonkey 5.3.0 (round #4)

Hi Rohit, I've sent you the scripts 'off list' so you can test them for yourself, but also added comments in-line Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Rohit Yadav

Re: CloudStack with XenServer on single host

a better option is to install the free version of ESXi then add a CentOS VM for CloudStack and a XenServer VM as your Hypervisor. If you configure ESXi for nested virtualisation your XenServer will support HVM VMs, unlike on Virtualbox which will only support PV VMs Regards Geoff Higginbottom

Re: CloudStack with XenServer on single host

think we should encourage the use of complex 'hacked' deployments which could give them problems in the event the Host is restarted etc. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581

Re: CloudStack with XenServer on single host

Devcloud uses KVM and I assume they want to test XenServer Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com

Re: CloudStack with XenServer on single host

. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com | www.shapeblue.comhtp://www.shapeblue.com/ | Twitter

RE: Public Network Question

Hi Osay, Your Public Traffic needs to be exactly that, 'Public' - It is supposed to be Public IPs directly connected to the Internet without any Firewalls in the way. The Virtual Router is the Firewall for each Isolated Guest Network. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44

RE: Unable to start a VM due to insufficient capacity

Hi Ugo, What system VM template did you use? (exact download URL please) Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: Ugo Vasi [mailto:ugo.v...@procne.it] Sent: 06 October 2014 10:57

RE: CS 4.4.0 and XenServer 6.2. Stopping VM destroys it.

Change CPU/RAM (via compute offering) Change Affinity Groups The Hypervisor which will run the VM is only chosen when the VM starts, so any Hypervisor with access to the Shared Storage for the Cluster could start the VM. Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M

RE: Advanced networking CloudStack 4.3

://www.slideshare.net/ShapeBlue/introduction-to-cloudstack-43-networking http://shapeblue.com/cloudstack/understanding-cloudstacks-physical-networking-architecture/ http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/latest/ Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540

Re: User Deleted Recover templates and isos

How long ago were they deleted and what are your expunge intervals Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot

Re: User Deleted Recover templates and isos

You should be able to restore the templates to sec storage and revert the deletion in the DB by removing the entries from the 'removed' column in the various tables such as account, domain, template etc. Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S

Re: cloudstack-management switch over fail

either the server cannot connect to the DB server or there is a problem with the DB encryption Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot

Re: cloudstack-management switch over fail

setting to point to server B, then stop and start (not simply restart) each system VM? Regards Geoff Higginbottom CTO / Cloud Architect D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot

  1   2   3   4   >