hello everyone,
my ovirt-engine and host certification is expired, is it any method no need to
shutdown
all the vm can enroll/update the certificate between engine and the host???
i am using the ovirt 4.0
i tried to set the host into maintenance and then "Enroll Certificates"
from the UI
but
hello everyone,
my ovirt-engine and host certification is expired, is it any method no need to
shutdown
all the vm can enroll/update the certificate between engine and the host???
i am using the ovirt 4.0
i tried to set the host into maintenance and then "Enroll Certificates"
from the UI
but
Hi,
On Mon, January 8, 2018 9:44 am, Yaniv Kaul wrote:
> On Mon, Jan 8, 2018 at 4:27 PM, Marktvk wrote:
>
>> Hello Correct.
>>
>> But i can not do this for a reason. I hope ovirt will bring a kvm
>> upgrade
>> for 4.0 the security issue at this moment with CPU's ( intel)
>>
>
On Mon, Jan 8, 2018 at 4:27 PM, Marktvk wrote:
> Hello Correct.
>
> But i can not do this for a reason. I hope ovirt will bring a kvm upgrade
> for 4.0 the security issue at this moment with CPU's ( intel)
>
You could upgrade your CPU firmware and get up-to-date packages, but
Hello Correct.
But i can not do this for a reason. I hope ovirt will bring a kvm
upgrade for 4.0 the security issue at this moment with CPU's ( intel)
> I believe you most upgrade to 4.1 first, and then to 4.2.
>
>
>
> On Jan 8, 2018 6:00 AM, "Marktvk"
I believe you most upgrade to 4.1 first, and then to 4.2.
On Jan 8, 2018 6:00 AM, "Marktvk" wrote:
Hello,
We have now running ovirt 4.0 for a specif reason we can not upgrade to
the new version.
If possible for 1 time to upgrade qemu-kvm to the new version for the
fix
Hello,
We have now running ovirt 4.0 for a specif reason we can not upgrade to
the new version.
If possible for 1 time to upgrade qemu-kvm to the new version for the
fix with processors today ?
I hope so.
___
Users mailing list
Users@ovirt.org
f93210-e459-4491-a078-a0ee02457f91.png]<http://www.unicef.fr/>
<http://www.unicef.fr>
De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la part de
Jorick Astrego
Envoyé : mardi 10 octobre 2017 19:41
À : users@ovirt.org
Objet : Re: [ovirt-users] Ovirt 4.0 and
gt; # libvirt. Per RFC 6331 this is vulnerable to many serious security
>> > # flaws and should no longer be used. Thus GSSAPI is now the default.
>> > #
>> > # To use GSSAPI requires that a libvirtd service principal is
>> > # added to the Kerb
file listed below
> >
> > Alain
> >
> >
> >
> > Alain VONDRA
> >
> > Chargé d'Exploitation et de Sécurité des Systèmes d'Information
> > Direction Administrative et Financière
> > +33 1 44 39 77 7
ww.unicef.fr
> -Message d'origine-
> De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la part
de Alan Griffiths
> Envoyé : mercredi 4 octobre 2017 15:50
> À : Ovirt Users <users@ovirt.org>
> Objet : [ovirt-users] Ovirt 4.0 and EL 7.4
ICEF France
> 3 rue Duguay Trouin 75006
> PARIS
> www.unicef.fr
> -Message d'origine-
> De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la part de
> Alan Griffiths
> Envoyé : mercredi 4 octobre 2017 15:50
> À : Ovirt Users <users@ovirt.org>
> Obj
-
De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la part de
Alan Griffiths
Envoyé : mercredi 4 octobre 2017 15:50
À : Ovirt Users <users@ovirt.org>
Objet : [ovirt-users] Ovirt 4.0 and EL 7.4
Hi,
Is 4.0 supported/known to work on CentOS 7.4?
I've just tried to upgra
Il 04 Ott 2017 15:51, "Alan Griffiths" ha scritto:
Hi,
Is 4.0 supported/known to work on CentOS 7.4?
I've just tried to upgrade one of the hosts in my lab from 7.3 to 7.4
and now vdsm-network fails to start with
vdsm-tool: libvirt: XML-RPC error : authentication
Hi,
Is 4.0 supported/known to work on CentOS 7.4?
I've just tried to upgrade one of the hosts in my lab from 7.3 to 7.4
and now vdsm-network fails to start with
vdsm-tool: libvirt: XML-RPC error : authentication failed: authentication failed
To even get this far I had to exclude gluster
On Tue, Sep 26, 2017 at 2:21 AM, Edward Clay wrote:
> Hello, I've recently ran into a couple of problems. One that I'm noticing
> right now is that when I do a yum check-update I'm getting a 404 .
>
> yum clean all
> yum check-update
> Loaded plugins: fastestmirror,
Hello, I've recently ran into a couple of problems. One that I'm
noticing right now is that when I do a yum check-update I'm getting a
404 .
yum clean allyum check-updateLoaded plugins: fastestmirror,
versionlockbase
Hi Rohit,
You have 2 ways to handle this case;
1. Use pin to multiple hosts [a]. This will force the VM to run on one of
the hosts you specify (1 or 2).
If the VM is defined as highly available, it'll automatically be restarted
on the other host in case the
current one goes down.
2. Use affinity
I got it.
It is under configure button at top right corner.
I want to do below stuff please help me how can I make it possible using
ovirt.
(let assume 2 host system and 1 vm)
1> I want to pin Host for particular VM let say host is host1.
2> In some circumstances let say host1 goes down in that
Hi,
Can some one help me how to select PinToHost policy in ovirt 4.0 ?
I am lost in GUI.
http://www.ovirt.org/develop/release-management/features/sla/scheduler-policies/
Thanks,
~Rohit
___
Users mailing list
Users@ovirt.org
Hi,
Storage Domains are DC entities and are not related to clusters.
Every hosts in the DC should be able to access the Storage Domain.
Once the SD is first created on one of the hosts, all the other host are
trying to connect also.
Can you mount manually from host2 ?
It maybe a firewall/network
On Wed, Apr 26, 2017 at 8:44 AM, knarra wrote:
> On 04/26/2017 10:39 AM, TranceWorldLogic . wrote:
>
> Hi,
>
> VM have guest agent install but power management is disable.
>
> Just want to confirm my understanding "HA will not work without power
> management", please say yes
On 04/25/2017 08:45 PM, TranceWorldLogic . wrote:
Hi,
This is regarding HA VM fail to restart on other host.
I have setup, which has 2 host in a cluster let say host1 and host2.
And one HA VM (with High priority), say vm1.
And also not storage domain is configure on host3 and it available all
Hi,
This is regarding HA VM fail to restart on other host.
I have setup, which has 2 host in a cluster let say host1 and host2.
And one HA VM (with High priority), say vm1.
And also not storage domain is configure on host3 and it available all time.
1> Initially vm1 was running on host2.
2>
On Fri, Apr 21, 2017 at 4:38 PM, Rafał Wojciechowski <
i...@rafalwojciechowski.pl> wrote:
> hi,
>
> my issue was related to bug in libvirtd.
> it was found in core dump by libvirt team
>
> "
>
> I'll send a patch to upstream libvirt to fix this crash. However it can take
> a while to get it back
hello,
I am not sure.
I have simple openvpn client profile with systemd enabled on boot time,
but I think I was not included it anywhere for libvirt/ovirt purpose.
also strange for me was statement that this interface was without IP -
this interface should be up with IP after connection
hi,
my issue was related to bug in libvirtd.
it was found in core dump by libvirt team
"
I'll send a patch to upstream libvirt to fix this crash. However it can take
a while to get it back to CentOS/RHEL. The source of this crash is that you
have a "tun0" network interface without IP address
hi,
I was unable to just remove glibc and install it again - I have
reinstalled it and rebooted the machine but it was not fixed anything
Thanks anyway.
Regards,
Rafal Wojciechowski
W dniu 18.04.2017 o 10:53, Yanir Quinn pisze:
Hi Rafal
not sure it relates to your issue, but i experienced a
Hi Rafal
not sure it relates to your issue, but i experienced a similar issue with
segfault (running on fedora 25)
to resolve it i had to remove glibc packages and then install them again
(maybe a same workaround for libvirt will do the job here)
Regards
Yanir Quinn
On Tue, Apr 18, 2017 at 9:32
On 04/18/2017 08:09 AM, Rafał Wojciechowski wrote:
>
> hello,
>
> I made comparison(+diff) between xml passing through vdsm which is
> working and another one which cause libvirtd segfault
>
> https://paste.fedoraproject.org/paste/eqpe8Byu2l-3SRdXc6LTLl5M1UNdIGYhyRLivL9gydE=
>
>
> I am not sure
hello,
I made comparison(+diff) between xml passing through vdsm which is
working and another one which cause libvirtd segfault
https://paste.fedoraproject.org/paste/eqpe8Byu2l-3SRdXc6LTLl5M1UNdIGYhyRLivL9gydE=
I am not sure if below setting are fine but I dont know how to change them
hello,
I extracted xml from /var/log/core for some test VM and tried to validy
via virt-xml-validate
maybe it could help in this case
https://paste.fedoraproject.org/paste/F878jO-16OEQZAQX0imQx15M1UNdIGYhyRLivL9gydE=
Regards,
Rafal Wojciechowski
hi,
I will add few informations:
hi,
I will add few informations:
currently I am using:
libvirt-daemon-kvm-2.0.0-10.el7_3.5.x86_64
libvirt-daemon-driver-qemu-2.0.0-10.el7_3.5.x86_64
qemu-kvm-ev-2.6.0-28.el7_3.6.1.x86_64
ovirt-engine-4.1.1.8-1.el7.centos.noarch(I tried update, to see if it
will help but nothing has changed)
Adding Francesco and Michal
On Sun, Apr 9, 2017 at 1:05 PM, Rafał Wojciechowski <
i...@rafalwojciechowski.pl> wrote:
> hi, I am having some problems after upgrade Ovirt from 4.0 to 4.1 version.
> I made full reinstall of Ovirt, but it seems to be not ovirt upgrade
> related problem(libvirt)
>
On 04/07/2017 12:06 PM, TranceWorldLogic . wrote:
> Hi,
>
> I was trying to deactivate host via python SDK but found that host is
> not moving in Maintenance State.
>
> In this scenario, I found that I have one additional network added in
> cluster but not setup on Host.
> Hence it retrying in
Hi,
I was trying to deactivate host via python SDK but found that host is not
moving in Maintenance State.
In this scenario, I found that I have one additional network added in
cluster but not setup on Host.
Hence it retrying in background for network sync.
Because of this I suspect host is fail
Adding Rafael who is maintaining the tool.
On Tue, Jan 10, 2017 at 8:19 AM, TranceWorldLogic . <
tranceworldlo...@gmail.com> wrote:
> Hi,
>
> I am trying to upload ISO image using engine-iso-uploader command as shown
> below.
> I have received error as shown below.
>
> # engine-iso-uploader -i
Hi,
I am trying to upload ISO image using engine-iso-uploader command as shown
below.
I have received error as shown below.
# engine-iso-uploader -i vms_isos_myHost -u admin@internal -r
ovirt.lab.com:443 upload /tmp/ubuntu.iso
Uploading, please wait...
ERROR: mount.nfs: access denied by server
We just found the issue. In the cluster logical networks it has a
display network that was pointing to the management netowrk(private not
accessible network).
system > data center > cluster > logical networks tab
I changed the display network to the public network. Now I'm able to
access the
For the cluster that the VM is in check the logical networks and make sure
that the role display is set on the proper network interface.
On Fri, Dec 16, 2016 at 11:51 AM, Michal Skrivanek
wrote:
> > On 16 Dec 2016, at 19:57, Edward Clay wrote:
>
> On 16 Dec 2016, at 19:57, Edward Clay wrote:
>
> Hello,
>
> I've recently upgraded from ovirt 3.6 to 4.0 and have run into an issue
> that I'm not finding an explanation or solution to. Currently when I
> create a new VM and start it up and attempt to connect to the
Hello,
I've recently upgraded from ovirt 3.6 to 4.0 and have run into an issue
that I'm not finding an explanation or solution to. Currently when I
create a new VM and start it up and attempt to connect to the console I
get the following error.
"Unable to connect to the graphic server Could not
On Sat, Oct 29, 2016 at 12:09 PM, wrote:
> Hello oVirt guru`s!
>
> In the first half of 2016 was the following information:
> http://lists.ovirt.org/pipermail/users/2016-June/040549.html
>
> Are there any news about the built-in oVirt 4.0 reporting mechanism?
It's
Hello oVirt guru`s!
In the first half of 2016 was the following information:
http://lists.ovirt.org/pipermail/users/2016-June/040549.html
Are there any news about the built-in oVirt 4.0 reporting mechanism?
Is there any chance that we will see reports in the oVirt web console?
Hi Simone,
Thanks for the info. I'll look at the solution that you suggested.
Cheers,
Gervais
> On Sep 29, 2016, at 10:01 AM, Simone Tiraboschi wrote:
>
>
>
> On Thu, Sep 29, 2016 at 2:51 PM, Gervais de Montbrun
Hi Simone,
Yes... I guess it was not clear in my original email. I changed the numbers
myself to lower the timeout and retries. With them set as they were set by
ovirt (timeout=3600 retry=5) things were not working for me.
Cheers,
Gervais
> On Sep 29, 2016, at 10:04 AM, Simone Tiraboschi
On Thu, Sep 29, 2016 at 3:04 PM, Simone Tiraboschi
wrote:
>
>
> On Thu, Sep 29, 2016 at 12:47 PM, Martin Perina
> wrote:
>
>> Hi,
>>
>> please take a look at my inline comments:
>>
>> On Tue, Sep 27, 2016 at 7:23 PM, Gervais de Montbrun <
>>
On Thu, Sep 29, 2016 at 3:11 PM, Martin Perina wrote:
>
>
> On Thu, Sep 29, 2016 at 3:04 PM, Simone Tiraboschi
> wrote:
>
>>
>>
>> On Thu, Sep 29, 2016 at 12:47 PM, Martin Perina
>> wrote:
>>
>>> Hi,
>>>
>>> please take a look at my
On Thu, Sep 29, 2016 at 12:47 PM, Martin Perina wrote:
> Hi,
>
> please take a look at my inline comments:
>
> On Tue, Sep 27, 2016 at 7:23 PM, Gervais de Montbrun <
> gerv...@demontbrun.com> wrote:
>
>> Hey All,
>>
>> Since updating to 4.0.x of oVirt, I have had an issue
On Thu, Sep 29, 2016 at 2:51 PM, Gervais de Montbrun wrote:
> Hi Martin,
>
> The entropy was super low. Somewhere around 140. I installed and
> configured haveged.service to start at bootup, reverted my apache
> changes... After a reboot, my systemctl status still says
Hi Martin,
The entropy was super low. Somewhere around 140. I installed and configured
haveged.service to start at bootup, reverted my apache changes... After a
reboot, my systemctl status still says that there are 7 services queued (note
that I erroneously said degraded in my previous email -
We have the same configuration under the file
/etc/httpd/conf.d/z-ovirt-engine-proxy.conf for the regular engine under
3.6 and 4.0, so I do not sure if it relates to the problem.
About entropy level check the bug
https://bugzilla.redhat.com/show_bug.cgi?id=1357246.
Best Regards
On Thu, Sep 29,
Hi,
please take a look at my inline comments:
On Tue, Sep 27, 2016 at 7:23 PM, Gervais de Montbrun wrote:
> Hey All,
>
> Since updating to 4.0.x of oVirt, I have had an issue with my hosted
> engine. After a some poking around, I think I have figured out my issue and
>
Hey All,
Since updating to 4.0.x of oVirt, I have had an issue with my hosted engine.
After a some poking around, I think I have figured out my issue and thought I
would share to see what others think.
The issue has existed with 4.0, 4.0.1, 4.0.2, 4.0.3, and still exists in 4.0.4.
Description:
Adding Tomas.
On Tue, Sep 13, 2016 at 11:36 AM, Ondra Machacek
wrote:
> Hi,
>
> we don't support it. What oVirt does is, that it pass the
> username/password to the VM, not the token.
>
> You can read more here[1]. But I doubt the proposed solution will be
> implemented.
Hi,
we don't support it. What oVirt does is, that it pass the
username/password to the VM, not the token.
You can read more here[1]. But I doubt the proposed solution will be
implemented. So you need to use it as is for now.
[1]
Hi all,
How can I use SSO token for authentication with Ovirt 4 when using virt-viewer?
Any special configuration needed? I can't seem to find much information on the
use of SSO token with Ovirt4. Thanks.
regards,Philip Lo
___
Users mailing list
Hi all,
This is a usability bug. If I let my engine time out, and then I'm
presented with a login form and I correctly submit it, I should immediately
be logged in.
[I think there may be some misunderstanding in the thread that this was
more of a normal or expected "your session timed out"
- Original Message -
> From: "Piotr Kliczewski" <pklic...@redhat.com>
> To: "knarra" <kna...@redhat.com>
> Cc: users@ovirt.org
> Sent: Wednesday, August 17, 2016 5:12:52 PM
> Subject: Re: [ovirt-users] ovirt 4.0 installation
>
>
On Wed, Aug 17, 2016 at 1:35 PM, knarra wrote:
> On 08/17/2016 04:57 PM, Nir Soffer wrote:
>
>> On Wed, Aug 17, 2016 at 10:16 AM, knarra wrote:
>>
>>> Hi,
>>>
>>>I see the below error logged in vdsm.log file . can some one help me
>>> understand what
On 08/17/2016 04:57 PM, Nir Soffer wrote:
On Wed, Aug 17, 2016 at 10:16 AM, knarra wrote:
Hi,
I see the below error logged in vdsm.log file . can some one help me
understand what this error is and do we have any bug for this error?
JsonRpc
On Wed, Aug 17, 2016 at 10:16 AM, knarra wrote:
> Hi,
>
> I see the below error logged in vdsm.log file . can some one help me
> understand what this error is and do we have any bug for this error?
>
> JsonRpc (StompReactor)::ERROR::2016-08-17
>
Hi,
I see the below error logged in vdsm.log file . can some one help me
understand what this error is and do we have any bug for this error?
JsonRpc (StompReactor)::ERROR::2016-08-17
12:32:05,348::betterAsyncore::113::vds.dispatcher::(recv) SSL error
during reading data: unexpected eof
On Sat, Aug 13, 2016 at 4:03 PM, wrote:
> Hello, oVirt guru's !
>
> I installed oVirt 4.0 on several servers HP ProLiant DL360 G5 with
> QLogic/Emulex 4G dual-port HBAs.
> These servers have multipath connection to the storage system HP 3PAR 7200.
>
> Before
Changing multpath conf is not supported, since this file is managed by
VDSM.
It should work well for the oVirt use case. Configuration should be changed
via the manager if needed and not via the conf.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th
I think I've found the problem, a typo in hostname and the certificate
are also created with the wrong FQDN.
Sometime you just don't see the problem on first approach.
Many thanks for your help
Regards,
Arsène
On 08/08/2016 10:58 AM, Simone Tiraboschi wrote:
On Mon, Aug 8, 2016 at 10:54 AM,
On Mon, Aug 8, 2016 at 10:54 AM, Arsène Gschwind
wrote:
> Status up-to-date : False
> Hostname :
> Host ID: 1
The issue is that on both the host you just see the status of host 1,
which is
On 08/08/2016 10:22 AM, Simone Tiraboschi wrote:
On Sun, Aug 7, 2016 at 3:42 PM, Arsène Gschwind
wrote:
Hi,
I have an oVirt setup with 2 server using hosted-engine, both server
resgistered properly the hosted-engine using :
# hosted-engine --deploy
but for some
On Sun, Aug 7, 2016 at 3:42 PM, Arsène Gschwind
wrote:
> Hi,
>
> I have an oVirt setup with 2 server using hosted-engine, both server
> resgistered properly the hosted-engine using :
> # hosted-engine --deploy
>
> but for some reason the second isn't recognized as a
Hi,
Thanks for your help...
The scheduling policy is set to none
I've set the "Enable HA Reservation" property and also install the
macspoof hook and power management is configured correctly and seems to
work but all that didn't help .
Regargs,
Arsène
On 08/07/2016 04:50 PM, Yanir Quinn
Hi,
Under Clusters-> your cluster -> Scheduling policy :
1. What is your selected policy and what properties does it contains ?
2. Under Additional Properties , is "Enable HA Reservation" selected ?
Also check if your host has the necessary hooks (e.g. macspoof) as in the
first host you deployed
Hi,
I have an oVirt setup with 2 server using hosted-engine, both server
resgistered properly the hosted-engine using :
# hosted-engine --deploy
but for some reason the second isn't recognized as a host for
hosted-engine and I'm not able to migrate the hosted-engine.
The error I get when
On Mon, Jul 4, 2016 at 12:36 PM, Roy Golan wrote:
>
>
> On Mon, Jul 4, 2016 at 12:23 PM, qinglong.d...@horebdata.cn <
> qinglong.d...@horebdata.cn> wrote:
>
>> Hi, all
>> I got an error when I excuted "hosted-engine --deploy" on centos
>> 7.0
>>
>
> We don't support
https://bugzilla.redhat.com/show_bug.cgi?id=1354140
On 07/09/2016 08:04 AM, Sandro Bonazzola wrote:
Can you please open a bz attaching the screenshot?
Il 08/Lug/2016 04:25, "SGhosh" > ha scritto:
Hi
Running ovirt 4.0 on CentOS 7 - and
Can you please open a bz attaching the screenshot?
Il 08/Lug/2016 04:25, "SGhosh" ha scritto:
> Hi
>
> Running ovirt 4.0 on CentOS 7 - and the gui color contrast seems to be off.
>
> I am seeing very low readability with the white text on light blue
> selection bar (attached).
Absolutely +1
On 7 July 2016 at 22:25, SGhosh wrote:
> Hi
>
> Running ovirt 4.0 on CentOS 7 - and the gui color contrast seems to be off.
>
> I am seeing very low readability with the white text on light blue
> selection bar (attached).
>
> Any tweaks?
>
> -subhendu
>
>
>
On Fri, Jul 8, 2016 at 12:17 PM, NUNIN Roberto wrote:
> Hello
>
> I’m in trouble deploying hosted-engine on a fresh-installed Centos7.2
> server, chosing fc domain:
>
>
>
> [ ERROR ] Failed to execute stage 'Environment customization': 'devList'
>
>
>
> Installation ends
Hello
I'm in trouble deploying hosted-engine on a fresh-installed Centos7.2 server,
chosing fc domain:
[ ERROR ] Failed to execute stage 'Environment customization': 'devList'
Installation ends with error, following the versions of ovirt installed
software:
On Fri, Jul 8, 2016 at 4:25 AM, SGhosh wrote:
> Hi
>
> Running ovirt 4.0 on CentOS 7 - and the gui color contrast seems to be off.
>
> I am seeing very low readability with the white text on light blue
> selection bar (attached).
>
> Any tweaks?
>
> -subhendu
>
>
>
Hi
Running ovirt 4.0 on CentOS 7 - and the gui color contrast seems to be off.
I am seeing very low readability with the white text on light blue
selection bar (attached).
Any tweaks?
-subhendu
___
Users mailing list
Users@ovirt.org
A, okay. I never had this happen prior to 4.0 obviously so it threw
me off. Thank you!
On Wed, Jul 6, 2016, at 10:23 AM, Ravi Nori wrote:
> This happens when you are on the login screen and the server is
> restarted or the session times out due to inactivity.
> The welcome page maintains a
This happens when you are on the login screen and the server is restarted
or the session times out due to inactivity.
The welcome page maintains a session state which is passed to and back from
SSO module. The error is raised when the state is lost due to session
timeout/engine restart
Ravi
On
Hello,
I've got this, too. But I thought this to be normal since the
session-timeout was reached.
Bye
Am 06.07.2016 um 04:08 schrieb Melissa Mesler:
> I am running 4.0 on CentOS 7.2. Sometimes when I first log in to the
> admin page, it will give me and error that says "Request state does not
Ravi - thoughts on this one?
On Wed, Jul 6, 2016 at 4:34 PM, Melissa Mesler
wrote:
> here is the engine.log: http://pastebin.com/bTPWYi9x
> server.log:http://pastebin.com/2KfjvWF3
> console.log: http://pastebin.com/T4seBaNX
>
>
> On Wed, Jul 6, 2016, at 01:33 AM, Oved
here is the engine.log: http://pastebin.com/bTPWYi9x
server.log:http://pastebin.com/2KfjvWF3
console.log: http://pastebin.com/T4seBaNX
On Wed, Jul 6, 2016, at 01:33 AM, Oved Ourfali wrote:
> Hi Melissa
>
> Can you attach the engine logs?
>
> Thanks,
> Oved
>
> On Wed, Jul 6, 2016 at 5:08 AM,
Thanks! No specific reasons. I use IP in ovirt 3.6 and it seems simple to use
an IP address in some cases.
From: Yedidyah Bar David
Date: 2016-07-06 14:26
To: qinglong.d...@horebdata.cn
CC: users; 胡茂荣; 胡晓宇
Subject: Re: [ovirt-users] ovirt 4.0 engine access
On Wed, Jul 6, 2016 at 9:13 AM
Hi Melissa
Can you attach the engine logs?
Thanks,
Oved
On Wed, Jul 6, 2016 at 5:08 AM, Melissa Mesler
wrote:
> I am running 4.0 on CentOS 7.2. Sometimes when I first log in to the
> admin page, it will give me and error that says "Request state does not
> match session
On Wed, Jul 6, 2016 at 9:13 AM, qinglong.d...@horebdata.cn
wrote:
> Hi, all
> I am using ovirt 4.0. It seems that I could only use FQDN to access
> the website of engine. Is it possible to use IP to access the website?
No.
You can only access the engine using
Hi, all
I am using ovirt 4.0. It seems that I could only use FQDN to access the
website of engine. Is it possible to use IP to access the website?
Anyone can help? Thanks!
___
Users mailing list
Users@ovirt.org
I am running 4.0 on CentOS 7.2. Sometimes when I first log in to the
admin page, it will give me and error that says "Request state does not
match session state." Then if I go through the process of logging in
again, it will go through with no issue. It doesn't do this every time
but it does do it
Thanks, I have solved this problem. It seems that IPv6 has not been disabled
actually.
From: qinglong.d...@horebdata.cn
Date: 2016-07-05 14:57
To: Roy Golan
CC: users
Subject: Re: Re: [ovirt-users] ovirt 4.0 hosted engine deploy
Yes, IPv6 was enabled before. Now I think it has been disabled
vlans = {}
vmTypes = ['kvm']
From: Roy Golan
Date: 2016-07-05 14:30
To: qinglong.d...@horebdata.cn
CC: users
Subject: Re: Re: [ovirt-users] ovirt 4.0 hosted engine deploy
On Tue, Jul 5, 2016 at 5:37 AM, qinglong.d...@horebdata.cn
<qinglong.d...@horebdata.cn> wrote:
Reactor thread::INFO::2
tool.
>>>
>>> Martin Perina
>>>
>>>
>>> On Sunday, July 3, 2016, Yaniv Dary <yd...@redhat.com> wrote:
>>> >
>>> > Yaniv Dary
>>> > Technical Product Manager
>>> > Red Hat Israel Ltd.
>>&
st handler
for ::1:45018 stopped
..
It seems that a few messages come out every 15 seconds. Is vdsmd running at a
healthy status?
From: Roy Golan
Date: 2016-07-04 17:36
To: qinglong.d...@horebdata.cn
CC: users
Subject: Re: [ovirt-users] ovirt 4.0 hosted engine deploy
On Mon, Jul 4,
92306
>> > 8272306
>> > Email: yd...@redhat.com
>> > IRC : ydary
>>
>> >
>> > -- Forwarded message --
>> > From: COUSIN Kevin <ke...@famillecousin.fr>
>> > Date: Thu, Jun 30, 2016 at 5:31 PM
>> >
On Mon, Jul 4, 2016 at 12:23 PM, qinglong.d...@horebdata.cn <
qinglong.d...@horebdata.cn> wrote:
> Hi, all
> I got an error when I excuted "hosted-engine --deploy" on centos
> 7.0
>
We don't support 7.0 you need Centos 7.2
If you are running 7.2 look at /var/log/vdsm/vdsm.log to see why
Hi, all
I got an error when I excuted "hosted-engine --deploy" on centos 7.0.
[root@node ~]# hosted-engine --deploy
[ INFO ] Stage: Initializing
[ INFO ] Generating a temporary VNC password.
[ INFO ] Stage: Environment setup
During customization use CTRL-D to abort.
gt; > 8272306
>> > Email: yd...@redhat.com
>> > IRC : ydary
>>
>> >
>> > -- Forwarded message --
>> > From: COUSIN Kevin <ke...@famillecousin.fr>
>> > Date: Thu, Jun 30, 2016 at 5:31 PM
>> > Subject: [ovirt-
d.
> > 34 Jerusalem Road
> > Building A, 4th floor
> > Ra'anana, Israel 4350109
> >
> > Tel : +972 (9) 7692306
> > 8272306
> > Email: yd...@redhat.com
> > IRC : ydary
>
> >
> > -- Forwarded message ------
> > From
ke...@famillecousin.fr>
> Date: Thu, Jun 30, 2016 at 5:31 PM
> Subject: [ovirt-users] [oVirt 4.0] Is it possible to access oVirt through
a reverse proxy
> To: users@ovirt.org
>
>
> Hi list,
>
> I upgraded to oVirt 4.0 and it works fine. However, I used HAProxy to
> acce
1 - 100 of 133 matches
Mail list logo