[ovirt-users] Re: Separate NFS Domain Storage for each Domain Storage

[matthew.st...@fujitsu.com]

Upload the iso to one of the data domains you use for your VMs.



-Original Message-
From: Mikhail Po  
Sent: Tuesday, August 29, 2023 12:22 AM
To: users@ovirt.org
Subject: [ovirt-users] Re: Separate NFS Domain Storage for each Domain Storage

For the initial installation of the operating system in a virtual machine, you 
need to mount an ISO image that is located in the storage domain of the NFS 
type (ISO function). If the NFS server is located within a high-speed LAN (one 
data center), then there are no problems, if you need to connect an image to a 
remote site (second data center) with slow channels, then difficulties arise.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5LWTDGZEALHVST5JKQR7KITI2CMC44LK/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6OAV4G3TDUTMNAKDKOSOMGNAXNAD7XKM/

[ovirt-users] Re: Separate NFS Domain Storage for each Domain Storage

[matthew.st...@fujitsu.com]

I'm not sure what you mean by your "example", nor why you would need a 
dedicated ISO Storage Domain, when that practice was ended a while ago.

I have several "datacenters", all using iSCSI and FC SAN storage, but I keep an 
NFS storage domain available to copy ISO's and templates, and to move VMs 
(actually their disks) between datacenters, as needed.


-Original Message-
From: Mikhail Po  
Sent: Monday, August 28, 2023 12:39 AM
To: users@ovirt.org
Subject: [ovirt-users] Separate NFS Domain Storage for each Domain Storage

Is it possible in oVirt 4.3 for each Data Center to create a separate ISO 
Domain Storage, with NFS type, on one of the hosts belonging to this Data 
Center? For example, in the case of connecting a remote site in a separate Data 
Center to an existing Engine through slow network links.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WVGFZYUT6SSUFETOK54CBDTZS3KIZDR3/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OESPIPYDVPARJYCN3SCQ4TQGPAKXFV7S/

[ovirt-users] Re: Expand the disk space of the hosting engine

[matthew.st...@fujitsu.com]

You allocated a 100G storage domain.

Within that storage domain, you allocated a 50G disk to hold the disk image.

Just like any other storage domain, you can create additional disks.  I have 
seen warnings, for going over 80% allocated within this storage domain.

When building the Self-Hosted-Engine, I specify 75GB when asked about the size 
of the disk to create, and then use LVM to add the unused storage of the disk 
to the root and swap logical volumes.

You should be able to add a second disk of about 25G to the SHE, and use LVM to 
add it to the existing volume groups and expand the existing logical volumes.

Of course, I have not tested this.



-Original Message-
From: ziyi Liu  
Sent: Thursday, December 29, 2022 9:21 PM
To: users@ovirt.org
Subject: [ovirt-users] Re: Expand the disk space of the hosting engine

Thank you very much, I know the operation steps, but there is still one point 
that I don’t quite understand, fdisk -l only shows 50G, the actual disk 
allocation has 100G, how can I display the remaining 50G.
The second question is that if the allocated 100G is also full, how should I 
expand it? I can’t expand it using wei ui 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/QRKI2S4WLJ2JD7X63ECYUFSJ7Z765R5W/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/SZHVTIYS6YT4REAC7VTRMP2M5ZE6XKI4/

[ovirt-users] Re: Expand the disk space of the hosting engine

[matthew.st...@fujitsu.com]

I'm not talking about extending the initial disk.

When I build a self-hosted-engine, I also use a 100GiB storage domain, but when 
the install process requests the image, I use the provided image, and when it 
ask for the disk size, I state it as 75GiB.  (The SHE install has an issue when 
exceeding 80%)

The install procedure creates a 28GiB disk image, and the remaining space 
between 28GiB and 75GiB is unallocated.  It is this space I am creating another 
physical volume on, and using this physical volume to expand the volume group, 
and logical volume, to expand the root filesystem.

I personally have an issue with expanding root filesystems across multiple 
disks.I haven't done it, and won't make a recommendation until I do.

From: Nathanaël Blanchet 
Sent: Friday, December 30, 2022 9:09 AM
To: Jorge Visentini 
Cc: Stier, Matthew ; ziyi Liu 
; users@ovirt.org
Subject: Re: [ovirt-users] Re: Expand the disk space of the hosting engine

Why not simply adding a new ovirt disk/direct lun and adding it to the existing 
LVM group instead of  extending the initial disk? This is a very common way to 
achieve your goal.

Le 30 déc. 2022 14:53, Jorge Visentini 
mailto:jorgevisent...@gmail.com>> a écrit :
Hi guys.

So... the problem is that we can't extend the virtual disk on oVirt... "Cannot 
edit Virtual Disk. The operation is not supported for HOSTED_ENGINE disks."
In my case I also created a 100GB Domain Storage, but the disk is only 58GB and 
I can't increase it...



Em qui., 29 de dez. de 2022 às 18:53, 
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> 
mailto:matthew.st...@fujitsu.com>> escreveu:
If you used the default image for your self-hosted-engine, it will create the 
disk of the size you specified, (50GB) but only allocate the space it actually 
requires.

This means the remaining space on the allocated disk, is there, unused.

Since it setup with LVM, you can use 'fdisk' to create a partition of that 
unused space.

Use pvcreate to add that partition to LVM,

Use vgextend to extend the appropriate volume group

Use lvextend to extend the appropriate logical volume, and file-system.



-Original Message-
From: ziyi Liu mailto:lzy19930...@gmail.com>>
Sent: Thursday, December 29, 2022 10:13 AM
To: users@ovirt.org<mailto:users@ovirt.org>
Subject: [ovirt-users] Expand the disk space of the hosting engine

Now my hosting engine /var directory is full, and the 15G free space is fully 
occupied. When creating the hosting engine, I use 100G, but actually only use 
50G. What can I do to make /var bigger?
disk expansion
___
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to 
users-le...@ovirt.org<mailto:users-le...@ovirt.org> Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/V7UKBE5SJPH3GOZXEWEK4FL3B2PQVHWZ/
___
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to 
users-le...@ovirt.org<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XKZDIQR77TFROLMXYUF7JQBKJH3YTRIQ/


--
Att,
Jorge Visentini
+55 55 98432-9868
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/4AUOBAUPSOPA4FIT3VGN6PCXSWPRA54L/

[ovirt-users] Re: Expand the disk space of the hosting engine

[matthew.st...@fujitsu.com]

You are limited to both the size of the storage domain you created for the 
hosted-engine, and the disk you specified during installation.

The only option is unused free space between the installation image and the 
disk you created.

Outside of that, your next option would to do a dump and then restore onto a 
larger storage domain, with a larger disk specified.

Not a fun thing, since I’ve recently had to move ten datacenters to new 
storage, using this method.


From: Jorge Visentini 
Sent: Friday, December 30, 2022 7:53 AM
To: Stier, Matthew 
Cc: ziyi Liu ; users@ovirt.org
Subject: Re: [ovirt-users] Re: Expand the disk space of the hosting engine

Hi guys.

So... the problem is that we can't extend the virtual disk on oVirt... "Cannot 
edit Virtual Disk. The operation is not supported for HOSTED_ENGINE disks."
In my case I also created a 100GB Domain Storage, but the disk is only 58GB and 
I can't increase it...



Em qui., 29 de dez. de 2022 às 18:53, 
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> 
mailto:matthew.st...@fujitsu.com>> escreveu:
If you used the default image for your self-hosted-engine, it will create the 
disk of the size you specified, (50GB) but only allocate the space it actually 
requires.

This means the remaining space on the allocated disk, is there, unused.

Since it setup with LVM, you can use 'fdisk' to create a partition of that 
unused space.

Use pvcreate to add that partition to LVM,

Use vgextend to extend the appropriate volume group

Use lvextend to extend the appropriate logical volume, and file-system.



-Original Message-
From: ziyi Liu mailto:lzy19930...@gmail.com>>
Sent: Thursday, December 29, 2022 10:13 AM
To: users@ovirt.org<mailto:users@ovirt.org>
Subject: [ovirt-users] Expand the disk space of the hosting engine

Now my hosting engine /var directory is full, and the 15G free space is fully 
occupied. When creating the hosting engine, I use 100G, but actually only use 
50G. What can I do to make /var bigger?
disk expansion
___
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to 
users-le...@ovirt.org<mailto:users-le...@ovirt.org> Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/V7UKBE5SJPH3GOZXEWEK4FL3B2PQVHWZ/
___
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to 
users-le...@ovirt.org<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XKZDIQR77TFROLMXYUF7JQBKJH3YTRIQ/


--
Att,
Jorge Visentini
+55 55 98432-9868
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KQVFHVVUJDW7G2LYUZULP7ISX6WYSMUS/

[ovirt-users] Re: Expand the disk space of the hosting engine

[matthew.st...@fujitsu.com]

If you used the default image for your self-hosted-engine, it will create the 
disk of the size you specified, (50GB) but only allocate the space it actually 
requires.

This means the remaining space on the allocated disk, is there, unused.   

Since it setup with LVM, you can use 'fdisk' to create a partition of that 
unused space. 

Use pvcreate to add that partition to LVM, 

Use vgextend to extend the appropriate volume group

Use lvextend to extend the appropriate logical volume, and file-system.



-Original Message-
From: ziyi Liu  
Sent: Thursday, December 29, 2022 10:13 AM
To: users@ovirt.org
Subject: [ovirt-users] Expand the disk space of the hosting engine

Now my hosting engine /var directory is full, and the 15G free space is fully 
occupied. When creating the hosting engine, I use 100G, but actually only use 
50G. What can I do to make /var bigger?
disk expansion
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/V7UKBE5SJPH3GOZXEWEK4FL3B2PQVHWZ/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XKZDIQR77TFROLMXYUF7JQBKJH3YTRIQ/

[ovirt-users] Re: ovirt node Emulex network

[matthew.st...@fujitsu.com]

Elrepo also has packages for the drivers that RedHat decided to remove.

Of course, you could just purchase some supported Network Interface Cards.

-Original Message-
From: Darrell Budic  
Sent: Monday, December 19, 2022 5:41 PM
To: parallax 
Cc: users 
Subject: [ovirt-users] Re: ovirt node Emulex network

RedHat has dropped support for this, so I don’t know if there’s anyway to fix 
it for the node images short of respinning your own that includes the driver. I 
use almalinux 8 hosts with elrepo kernel-lt installed, which includes those 
drivers, myself.

   -Darrell

> On Dec 19, 2022, at 5:49 AM, parallax  wrote:
> 
> ovirt-node-ng-installer-4.4.10-2022030308.el8
> 
> ovirt-node-ng-installer-4.4.10-2022030308
> 
> can't recognize network intefaces:
> 
> 06:00.0 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb 
> NIC (be3) [19a2:0710] (rev 01)
> 06:00.1 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb 
> NIC (be3) [19a2:0710] (rev 01)
> 06:00.4 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb 
> NIC (be3) [19a2:0710] (rev 01)
> 06:00.5 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb 
> NIC (be3) [19a2:0710] (rev 01)
> 
> anyone know howto fix it ?
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org Privacy 
> Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/X2QWLS5Z
> XGDUYYWXMZREQG7PLP4MGTZP/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IAVVMYGRO5UPKXWEHCBU5UAVOKAXXJYA/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZMLPCKNO25F4WQ666DWNXTA6JMHLYSUR/

[ovirt-users] Re: Recombining disks under a single VM

[matthew.st...@fujitsu.com]

Scratch this query.  It appears we had two identical images.  It wouldn't 
permit importing due to matching disk id's.

From: matthew.st...@fujitsu.com 
Sent: Saturday, December 10, 2022 10:24 PM
To: users@ovirt.org
Subject: [ovirt-users] Recombining disks under a single VM

Up until now, we've been using iSCSI as the storage on all of our datacenters, 
and when we need to bulk move VMs, we moved iSCSI storage domains.

We've just setup our first datacenter with Fiber Channel storage, and no 
connectivity to our iSCSI storage.   For this move we have fallen back to using 
NFS storage domains, to move the necessary VMs from datacenter ONE to 
datacenter TWO.

The bulk of the transfer went fine, but for about one dozen two disk VMs both 
disks did not get moved at the same time.  So now I have one dozen VMs with 
only one drive on datacenter TWO and the other drive as an un-importable VM on 
the NFS storage partition, mounted on datacenter TWO.

Any hints on how I "merge" these two, back into one function VM?

==  matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EEY2GCQYBPQPKIUYZNTCQX77KFVPOLIT/

[ovirt-users] Recombining disks under a single VM

[matthew.st...@fujitsu.com]

Up until now, we've been using iSCSI as the storage on all of our datacenters, 
and when we need to bulk move VMs, we moved iSCSI storage domains.

We've just setup our first datacenter with Fiber Channel storage, and no 
connectivity to our iSCSI storage.   For this move we have fallen back to using 
NFS storage domains, to move the necessary VMs from datacenter ONE to 
datacenter TWO.

The bulk of the transfer went fine, but for about one dozen two disk VMs both 
disks did not get moved at the same time.  So now I have one dozen VMs with 
only one drive on datacenter TWO and the other drive as an un-importable VM on 
the NFS storage partition, mounted on datacenter TWO.

Any hints on how I "merge" these two, back into one function VM?

==  matthew.st...@fujitsu.com
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NATOQ4VBV4D3NKMNV67FB2HRJDBGCUNF/

[ovirt-users] Re: Moving SelfHosted Engine

[matthew.st...@fujitsu.com]

Assuming your are using SAN or NAS storage, have you considered just collapsing 
everything into the Default cluster?

-Original Message-
From: murat.cel...@dbpro.com.tr  
Sent: Wednesday, August 31, 2022 9:41 AM
To: users@ovirt.org
Subject: [ovirt-users] Moving SelfHosted Engine

Hello
We have got an Production ovirt installation with 1 datacenter and 2 clusters.

Default Cluster has got 2 hosts in it. kvm01 and kvm02.
PrimarySite cluster has got 2 hosts in it. kvm03 and kvm04

Our Self hosted engine is running on kvm01. We need to migrate the 
Selfhosted-engine to kvm03 or kvm04 since the hosts kvm01 and kvm02 hosts are 
going to be retired.

Anyone has any idea how this can be accomplished?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KW5YYL37FLURI67I2FQHRJD6BYYOTWTD/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZNYY3RYMNTRGNM52AYW4O4QMBGOTXPA6/

[ovirt-users] Re: Lost space in /var/log

[matthew.st...@fujitsu.com]

Deleted some files to "clean up" /var/log, but the space was not recovered?

Space for deleted files are only recovered when all references to that space 
are removed.   This includes the directory reference, and any open file-handles 
to the file.

The is a popular trick for a self-deleting scratch file.  Create a file, open 
file-handle to it, and then remove the file.   The open file-handle can then be 
written to, and read from, as long as you like, but when the file-handle is 
closed, explicitly or implicitly, the space is automatically recovered.


-Original Message-
From: Andrei Verovski  
Sent: Wednesday, June 22, 2022 3:27 PM
To: users@ovirt.org
Subject: [ovirt-users] Lost space in /var/log

Hi !

I have strange situation with low disk space on /var/log/, yet I can't figure 
out what have consumed so much space.
Look at the du output.

Thanks in advance for any suggestion(s).


# df -h

Filesystem   Size  Used Avail Use% Mounted on
/dev/mapper/centos-var   15G  1.3G   13G   9% /var
/dev/mapper/centos-var_log   7.8G  7.1G  293M  97% /var/log
/dev/mapper/centos-var_log_audit 2.0G   41M  1.8G   3% /var/log/audit

#
# du -ah /var/log | sort -n -r | head -n 20

664K/var/log/vdsm
660K/var/log/vdsm/vdsm.log
624K/var/log/gdm
580K/var/log/anaconda/storage.log
480K/var/log/anaconda/packaging.log
380K/var/log/gdm/:0.log.4
316K/var/log/anaconda/syslog
276K/var/log/tuned
252K/var/log/libvirt/qemu/NextCloud-Collabora-LVM.log-20210806
220K/var/log/Xorg.0.log
168K/var/log/gdm/:0.log
156K/var/log/yum.log-20191117
156K/var/log/secure-20180726
132K/var/log/libvirt/qemu/NextCloud-Collabora-Active.log
128K/var/log/anaconda/anaconda.log
120K/var/log/hp-snmp-agents
116K/var/log/hp-snmp-agents/cma.log
112K/var/log/vinchin
104K/var/log/vinchin/kvm_backup_service
104K/var/log/tuned/tuned.log.2

#
# find . -printf '%s %p\n'| sort -nr | head -10

16311686 ./rhsm/rhsm.log
4070423 ./cron-20180726
3667146 ./anaconda/journal.log
3409071 ./secure
300 ./rhsm/rhsm.log-20180726
2912670 ./audit/audit.log
1418007 ./sanlock.log
1189580 ./vdsm/vdsm.log
592718 ./anaconda/storage.log
487567 ./anaconda/packaging.log
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/N566CST3DAXILL77BBB2EYGTFX7ZQ2WY/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JCAQU32UZSEWKYRICOTC6QJMSC5BUZIW/

[ovirt-users] Re: Migrate Hosted-Engine from one NFS mount to another NFS mount

[matthew.st...@fujitsu.com]

I’ve always been told that migrating self-hosted-engine storage was a backup, 
shutdown, and rebuild from backup procedure.

In my iscsi environment it has never worked.  (More due to the history of my 
environment, than the procedure itself.)

Since we have too many hosts in a datacenter, we’ve choose to go another 
method, attrition.

I’m splitting of clusters into their own datacenters.  Once I’m down to the 
last host, running the original  SHE, I will simply power it down, reload it, 
and re-add it to one of my new datacenters.


From: Brian Ismay 
Sent: Wednesday, February 23, 2022 4:52 PM
To: users@ovirt.org
Subject: [ovirt-users] Migrate Hosted-Engine from one NFS mount to another NFS 
mount

Hello,

I am currently running Ovirt 4.2.5.3-1.el7 with an Hosted-Engine running on 
nfs-based storage.

I am needing to migrate the backend NFS store for the Hosted-Engine to a new 
share.

Is there specific documentation for this procedure? I see multiple references 
to a general procedure involving backing-up the existing install and then 
re-installing and restoring the backup. Is there any way to make a more clean 
change of the configuration?

Thanks,
Brian Ismay

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/U64NCDIXONK3R2F2UL4YISGAEQRDBK5W/

[ovirt-users] Re: ovirtmgmt VLAN and IP Change

[matthew.st...@fujitsu.com]

iSCSI environment.

-Original Message-
From: Abe E  
Sent: Saturday, February 19, 2022 2:09 PM
To: users@ovirt.org
Subject: [ovirt-users] Re: ovirtmgmt VLAN and IP Change

How did you do this if the host had a gluster volume on it though? Mine does 
not let me remove due to that.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/45VOUTITSAE2NKUREWKZKEUJ43Q7KBL7/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HOEHKAKV5R6HNOKFPVHGGUPW43UVXAXI/

[ovirt-users] Re: ovirtmgmt VLAN and IP Change

[matthew.st...@fujitsu.com]

I had to do this for a number of hosts last year.

I put the host into maintenance, and then removed it.

I used 'nmtui' to change the hostname. (Changing hostname suffix from two 
digits to three digits)  (Probably could have used hostnamectl) 

I change directory to  /var/lib/vdsm/persistence/netconf/nets/ and edited the 
appropriate files.

I rebooted the host.

I logged back in, and checked the results.

I re-added the host to the datacenter.

-Original Message-
From: Abe E  
Sent: Friday, February 18, 2022 7:09 PM
To: users@ovirt.org
Subject: [ovirt-users] ovirtmgmt VLAN and IP Change

Hello All,

So due to some issues with provisioning new networks in our lab, I have to use 
a different VLAN in for my ovirt cluster.

Cluster -> 3 Hosts (Hyperconverged)
What I want to do is essentially change the Ovirtmgmt interface to another vlan 
but also change the IP Schemes, I wont be needing to change the storage network 
vlans.

I am just wondering how this is done safely. 
Can I through the engine, put the host 1 by 1 into maint mode and manually 
adjust the IPs and apply and reconfigure the switch port? What about the IP 
that the engine has set or would I change that manually through console once I 
change the ovirtmgmt vlan on all the nodes?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5JTGYJ6K5CDYFQ22QFOFF4LP5XCHMSK7/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZFLGLN7G5TP7OOJFPLN2F6FS55H7YFMY/

[ovirt-users] Need help in dumping a table

[matthew.st...@fujitsu.com]

I'm planning a re-organization of my oVirt environment.

I need a Postgres command-line to dump a listing of VMs/disks/storage_domains.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TZPK5JLWDOXWLGH3MIB3RT2C5OJKAK5S/

[ovirt-users] Re: about the password of the engine host and worker KVM hosts

[matthew.st...@fujitsu.com]

My understanding, is that OLVM/oVirt use the root password to push it's SSH 
credentials at first login.  Once that is done, all other SSH access is though 
those credentials.

You should be able to change the root password without issue.

From: Tommy Sway 
Sent: Friday, September 17, 2021 4:12 AM
To: users@ovirt.org
Subject: [ovirt-users] about the password of the engine host and worker KVM 
hosts

I have successfully installed and deployed OLVM, where the Engine uses a 
separate physical server and the virtual machines work on other worker servers.
Due to the company's internal security policy, I now need to change the root 
user password for all servers. Is that ok?
Will cluster running be affected?

Thanks!


___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LHOICAEOUX37PAIG445O7ALDYQLIR5FB/

[ovirt-users] Re: oVirt 4.3 DWH with Grafana

[matthew.st...@fujitsu.com]

Saw those also.  Haven’t gotten around to investigating those.

From: Tommy Sway 
Sent: Wednesday, September 15, 2021 11:14 PM
To: Stier, Matthew ; 'Michal Gutowski' 
; 'Vrgotic, Marko' 
Cc: users@ovirt.org
Subject: RE: [ovirt-users] Re: oVirt 4.3 DWH with Grafana

Thank you!

I tried it, and I can import the json after replace the 4.4 with 4.3, but still 
have some errors like this:

pq: column "count_threads_as_cores" does not exist
Object
status:400
statusText:"Bad Request"
data:Object
results:Object
message:"pq: column "count_threads_as_cores" does not exist"
message:"pq: column "count_threads_as_cores" does not exist"

Many of the other reports worked fine, with only a few similar errors.
Is this caused by version incompatibility?
After all, 4.4 in the original document was replaced with 4.3 before the import.




From: matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> 
mailto:matthew.st...@fujitsu.com>>
Sent: Wednesday, September 15, 2021 3:28 AM
To: Tommy Sway mailto:sz_cui...@163.com>>; 'Michal Gutowski' 
mailto:michal.gutow...@oracle.com>>; 'Vrgotic, 
Marko' mailto:m.vrgo...@activevideo.com>>
Cc: users@ovirt.org<mailto:users@ovirt.org>
Subject: RE: [ovirt-users] Re: oVirt 4.3 DWH with Grafana

The instructions to modify the json files are missing. (Using find and sed to 
change all instances of v4_4_ to v4_3_ before importing them into Grafana)

This is from an Oracle Blog on the doing this with OLVM 4.3 (which is basically 
a repackaged oVirt 4.3)

Build Grafana Dashboard for Oracle Linux Virtualization Manager 
4.3<https://blogs.oracle.com/scoter/post/build-grafana-dashboard-for-oracle-linux-virtualization-manager-43>

From: Tommy Sway mailto:sz_cui...@163.com>>
Sent: Tuesday, September 14, 2021 3:01 AM
To: 'Michal Gutowski' 
mailto:michal.gutow...@oracle.com>>; 'Vrgotic, 
Marko' mailto:m.vrgo...@activevideo.com>>
Cc: users@ovirt.org<mailto:users@ovirt.org>
Subject: [ovirt-users] Re: oVirt 4.3 DWH with Grafana

The oVirt version I'm using is 4.3, and I get an error when I import JSON.
pq: relation"v4_4_latest_configuration_datacenters" does not exist.



From: users-boun...@ovirt.org<mailto:users-boun...@ovirt.org> 
mailto:users-boun...@ovirt.org>> On Behalf Of Michal 
Gutowski
Sent: Wednesday, November 25, 2020 12:26 AM
To: Vrgotic, Marko mailto:m.vrgo...@activevideo.com>>
Cc: users@ovirt.org<mailto:users@ovirt.org>
Subject: [ovirt-users] Re: oVirt 4.3 DWH with Grafana

Hi Marko,

I've tested this myself as I like playing with various Grafana use-cases and 
following steps allow you to set up Grafana Monitoring for your oVirt 4.3 
environment and re-use all Grafana Dashboards from latest oVirt 4.4 on a 
previous release.

1. Allowing Grafana to connect to oVirt DWH database (Data Warehouse)

Login to the oVirt engine 4.3 and create a user "grafana" with password 
"grafana" that will get a read-only access to the ovirt_engine_history database 
and will be able to use public schema

# su - postgres -c 'scl enable rh-postgresql10 bash'
# psql -U postgres -c "CREATE ROLE grafana WITH LOGIN ENCRYPTED PASSWORD 
'grafana';" -d ovirt_engine_history
# psql -U postgres -c "GRANT CONNECT ON DATABASE ovirt_engine_history TO 
grafana;"
# psql -U postgres -c "GRANT USAGE ON SCHEMA public TO grafana;" 
ovirt_engine_history

Generate the rest of the permissions that will be granted to the newly created 
user and save them to a file:

# psql -U postgres -c "SELECT 'GRANT SELECT ON ' || relname || ' TO grafana;' 
FROM pg_class JOIN pg_namespace ON pg_namespace.oid = pg_class.relnamespace 
WHERE nspname = 'public' AND relkind IN ('r', 'v');" --pset=tuples_only=on  
ovirt_engine_history > grant.sql

Use the file you created in the previous step to grant permissions to the newly 
created user:
# psql -U postgres -f grant.sql ovirt_engine_history

Remove the file you used to grant permissions:
# rm grant.sql

Exit the postgres user shell by pressing Ctrl+d

Add the following lines for the newly created user to 
/var/opt/rh/rh-postgresql10/lib/pgsql/data/pg_hba.conf preceding the line 
beginning local all all

hostovirt_engine_history grafana 0.0.0.0/0   md5
hostovirt_engine_history grafana ::0/0   md5

Reload postgres service
# systemctl reload rh-postgresql10-postgresql

2. Installing Grafana

You can install Grafana directly on the oVirt Engine machine (this is how it's 
done in oVirt 4.4) or on a separate machine. Following steps shows how you can 
install Grafana on a Oracle Linux 7 server. Note: Oracle provides Grafana in 
the OLCNE yum repository - you only need to install the repository definition 
package to pickup Grafana and it's dependencies.

# yum install oraclelinux-release-el7
# yum install oracle-olcne-release-el7
# yum-c

[ovirt-users] Re: 2-node with FC Storage

[matthew.st...@fujitsu.com]

One path per controller though its own switch is usually enough.

I install multiple links between storage and switches, to increase the 
bandwidth of that link.  But I've never done that between switches and hosts.

Link A from host to Switch A to Storage Controller A

Link B from host to Switch B to Storage Controller B
 

-Original Message-
From: jorgevisent...@gmail.com  
Sent: Wednesday, September 15, 2021 1:37 PM
To: users@ovirt.org
Subject: [ovirt-users] Re: 2-node with FC Storage

Hey man, what's up?

So... I use 4 FC cables (2 per controller) connected from Storage to FC Switch. 
From this FC Switch I connect my hosts with 4 FC cables.
The more cables from Storage to Switch, the more throughout you will get.

That way I can use multipath. So when I drop an FC cable or a Storage 
controller, I wouldn't lose connection.
In this way it is also possible to use all virtualization technologies, such as 
LUN migration between Storage and/or Live Migration.


An example of multipath:

3600d0231000465cf19190aad44bfbbca dm-14 IFT,DS 4000 Series size=5.0T 
features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
|-+- policy='service-time 0' prio=50 status=active
| |- 1:0:2:14 sddv 71:208  active ready running
| |- 2:0:2:14 sddm 71:64   active ready running
| |- 4:0:2:14 sdek 128:192 active ready running
| |- 5:0:2:14 sddw 71:224  active ready running
| |- 6:0:2:14 sdes 129:64  active ready running
| |- 7:0:3:14 sdgz 132:240 active ready running
| |- 8:0:1:14 sdje 8:384   active ready running
| `- 9:0:1:14 sdnj 71:336  active ready running
`-+- policy='service-time 0' prio=10 status=enabled
  |- 1:0:3:14 sdhw 134:96  active ready running
  |- 2:0:3:14 sdgb 131:112 active ready running
  |- 4:0:3:14 sdko 66:448  active ready running
  |- 5:0:3:14 sdjm 65:256  active ready running
  |- 6:0:3:14 sdla 67:384  active ready running
  |- 7:0:2:14 sdcp 69:208  active ready running
  |- 8:0:2:14 sdlz 69:272  active ready running
  `- 9:0:0:14 sdmg 69:384  active ready running 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GCXM54OUGKHUNBDSII2PZQ6L2E3IMBCH/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WJBQUEKQZC755F5DCZUOW2WYDDP6WDMR/

[ovirt-users] Re: oVirt 4.3 DWH with Grafana

[matthew.st...@fujitsu.com]

The instructions to modify the json files are missing. (Using find and sed to 
change all instances of v4_4_ to v4_3_ before importing them into Grafana)

This is from an Oracle Blog on the doing this with OLVM 4.3 (which is basically 
a repackaged oVirt 4.3)

Build Grafana Dashboard for Oracle Linux Virtualization Manager 
4.3

From: Tommy Sway 
Sent: Tuesday, September 14, 2021 3:01 AM
To: 'Michal Gutowski' ; 'Vrgotic, Marko' 

Cc: users@ovirt.org
Subject: [ovirt-users] Re: oVirt 4.3 DWH with Grafana

The oVirt version I'm using is 4.3, and I get an error when I import JSON.
pq: relation"v4_4_latest_configuration_datacenters" does not exist.



From: users-boun...@ovirt.org 
mailto:users-boun...@ovirt.org>> On Behalf Of Michal 
Gutowski
Sent: Wednesday, November 25, 2020 12:26 AM
To: Vrgotic, Marko mailto:m.vrgo...@activevideo.com>>
Cc: users@ovirt.org
Subject: [ovirt-users] Re: oVirt 4.3 DWH with Grafana

Hi Marko,

I've tested this myself as I like playing with various Grafana use-cases and 
following steps allow you to set up Grafana Monitoring for your oVirt 4.3 
environment and re-use all Grafana Dashboards from latest oVirt 4.4 on a 
previous release.

1. Allowing Grafana to connect to oVirt DWH database (Data Warehouse)

Login to the oVirt engine 4.3 and create a user "grafana" with password 
"grafana" that will get a read-only access to the ovirt_engine_history database 
and will be able to use public schema

# su - postgres -c 'scl enable rh-postgresql10 bash'
# psql -U postgres -c "CREATE ROLE grafana WITH LOGIN ENCRYPTED PASSWORD 
'grafana';" -d ovirt_engine_history
# psql -U postgres -c "GRANT CONNECT ON DATABASE ovirt_engine_history TO 
grafana;"
# psql -U postgres -c "GRANT USAGE ON SCHEMA public TO grafana;" 
ovirt_engine_history

Generate the rest of the permissions that will be granted to the newly created 
user and save them to a file:

# psql -U postgres -c "SELECT 'GRANT SELECT ON ' || relname || ' TO grafana;' 
FROM pg_class JOIN pg_namespace ON pg_namespace.oid = pg_class.relnamespace 
WHERE nspname = 'public' AND relkind IN ('r', 'v');" --pset=tuples_only=on  
ovirt_engine_history > grant.sql

Use the file you created in the previous step to grant permissions to the newly 
created user:
# psql -U postgres -f grant.sql ovirt_engine_history

Remove the file you used to grant permissions:
# rm grant.sql

Exit the postgres user shell by pressing Ctrl+d

Add the following lines for the newly created user to 
/var/opt/rh/rh-postgresql10/lib/pgsql/data/pg_hba.conf preceding the line 
beginning local all all

hostovirt_engine_history grafana 0.0.0.0/0   md5
hostovirt_engine_history grafana ::0/0   md5

Reload postgres service
# systemctl reload rh-postgresql10-postgresql

2. Installing Grafana

You can install Grafana directly on the oVirt Engine machine (this is how it's 
done in oVirt 4.4) or on a separate machine. Following steps shows how you can 
install Grafana on a Oracle Linux 7 server. Note: Oracle provides Grafana in 
the OLCNE yum repository - you only need to install the repository definition 
package to pickup Grafana and it's dependencies.

# yum install oraclelinux-release-el7
# yum install oracle-olcne-release-el7
# yum-config-manager --enable ol7_optional_latest ol7_olcne11
# yum install grafana
# systemctl enable --now grafana-server

3. Adding oVirt DWH database as Data Source in Grafana

Login to Grafana (default port 3000) and navigate to Configuration -> 
DataSources and click on Add Data Source button.

Select PostgreSQL source and use the following settings (adjust the Host IP 
address to match your oVirt Engine IP but do not change the Name):
Name: oVirt DWH
Host: your-engine-ip-address:5432
user: grafana
pass: grafana
SSL mode: disable

4. Importing Dashboards from oVirt 4.4

Download Grafana Dashboards from oVirt 4.4 repository: 
https://github.com/oVirt/ovirt-dwh/tree/master/packaging/conf/grafana-dashboards

You can now import them in Grafana by navigating to Create -> Import and 
clicking on Upload .json file or by simply pasting JSON content.

I've tested this on my OLVM/oVirt 4.3 and works perfectly well.

Have fun!
Michal

Michał Gutowski
Principal Solutions Engineer, EMEA
+48 665 222 979

Oracle Open Cloud Infrastructure Software - Linux & Virtualization

On 24 Nov 2020, at 11:53, Vrgotic, Marko 
mailto:m.vrgo...@activevideo.com>> wrote:

Dear oVirt folks,

Thank you all for suggestions.

I will give it a go and see how far I get.

-
kind regards/met vriendelijke groeten

Marko Vrgotic
Sr. System Engineer @ System Administration

ActiveVideo
o: +31 (35) 6774131
m: +31 (65) 5734174
e: m.vrgo...@activevideo.com
w: 

[ovirt-users] Re: Q: Node Upgrade Path

[matthew.st...@fujitsu.com]

You need to go in steps.

https://www.ovirt.org/documentation/upgrade_guide/

-Original Message-
From: Andrei Verovski  
Sent: Thursday, July 8, 2021 2:52 PM
To: users@ovirt.org
Cc: Stier, Matthew 
Subject: Re: [ovirt-users] Q: Node Upgrade Path

Hi,

OK, thanks for the tip.
I always upgraded nodes via oVirt web interface, which is now 4.4.7, and I 
assume it can't update node 4.2 -> 4.3, because 4.3 is too old. Please correct 
if I'm wrong here.

May I use these commands to safely upgrade nodes manually?

yum check-update
yum clean all
yum update
yum remove ovirt-release42
yum install
https://resources.ovirt.org/pub/ovirt-4.3/rpm/el7/noarch/ovirt-node-ng-image-update-4.3.0-1.el7.noarch.rpm

On 7/8/21 8:41 PM, matthew.st...@fujitsu.com wrote:
> If the hardware is old, and won't support EL8, the best option is to update 
> to oVirt 4.3.10 and update CentOS to 7u9.
>
> Some of my systems have megaraid sas2 raid controllers, which Red Hat have 
> stopped supporting, and all the variant have followed suit.
>
> I have tried the Elrepo DUD's to work around the problem, but my results (in 
> the 4.4.1/4.4.2 timeframe) were not satisfactory.
>
> -Original Message-
> From: Andrei Verovski 
> Sent: Thursday, July 8, 2021 6:42 AM
> To: users@ovirt.org
> Subject: [ovirt-users] Q: Node Upgrade Path
>
> Hi,
>
>
> I have 2 oVirt nodes still running on CentOS 7.6.
> rpm -qa | grep ovirt - results in version 4.2.
>
> Does it makes sense to upgrade CentOS 7.6 to Stream, and then upgrade oVirt 
> Node sw, or just leave for a couple of years till hardware will be trashed?
> I’m always keep oVirt Engine up to date, so my only concern if at any point 
> it will stop support old Node sw.
>
> Thanks in advance for any suggestion.
> Andrei
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org Privacy 
> Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/6SCBZF3N
> ASM5UIABKRANHI6UUHXCWG4Y/

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/L4FIM6TJDOHC3FWHGMM7AKNLCIOHG4J3/

[ovirt-users] Re: Q: Node Upgrade Path

[matthew.st...@fujitsu.com]

Some of my systems have megaraid sas2 raid controllers, which Red Hat have 
stopped supporting "under EL8", and all the variants have followed suit.

-Original Message-----
From: matthew.st...@fujitsu.com  
Sent: Thursday, July 8, 2021 12:42 PM
To: Andrei Verovski ; users@ovirt.org
Subject: [ovirt-users] Re: Q: Node Upgrade Path

If the hardware is old, and won't support EL8, the best option is to update to 
oVirt 4.3.10 and update CentOS to 7u9.

Some of my systems have megaraid sas2 raid controllers, which Red Hat have 
stopped supporting, and all the variant have followed suit.

I have tried the Elrepo DUD's to work around the problem, but my results (in 
the 4.4.1/4.4.2 timeframe) were not satisfactory.

-Original Message-
From: Andrei Verovski  
Sent: Thursday, July 8, 2021 6:42 AM
To: users@ovirt.org
Subject: [ovirt-users] Q: Node Upgrade Path

Hi, 


I have 2 oVirt nodes still running on CentOS 7.6.
rpm -qa | grep ovirt - results in version 4.2.

Does it makes sense to upgrade CentOS 7.6 to Stream, and then upgrade oVirt 
Node sw, or just leave for a couple of years till hardware will be trashed?
I’m always keep oVirt Engine up to date, so my only concern if at any point it 
will stop support old Node sw.

Thanks in advance for any suggestion.
Andrei
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6SCBZF3NASM5UIABKRANHI6UUHXCWG4Y/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/MJQW32RA6OOCF2VGRRU4CQ6HLEWJMD27/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/CIC37BGT4A44GVCEX2XJ4JJPTICKBVYG/

[ovirt-users] Re: Q: Node Upgrade Path

[matthew.st...@fujitsu.com]

If the hardware is old, and won't support EL8, the best option is to update to 
oVirt 4.3.10 and update CentOS to 7u9.

Some of my systems have megaraid sas2 raid controllers, which Red Hat have 
stopped supporting, and all the variant have followed suit.

I have tried the Elrepo DUD's to work around the problem, but my results (in 
the 4.4.1/4.4.2 timeframe) were not satisfactory.

-Original Message-
From: Andrei Verovski  
Sent: Thursday, July 8, 2021 6:42 AM
To: users@ovirt.org
Subject: [ovirt-users] Q: Node Upgrade Path

Hi, 


I have 2 oVirt nodes still running on CentOS 7.6.
rpm -qa | grep ovirt - results in version 4.2.

Does it makes sense to upgrade CentOS 7.6 to Stream, and then upgrade oVirt 
Node sw, or just leave for a couple of years till hardware will be trashed?
I’m always keep oVirt Engine up to date, so my only concern if at any point it 
will stop support old Node sw.

Thanks in advance for any suggestion.
Andrei
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6SCBZF3NASM5UIABKRANHI6UUHXCWG4Y/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/MJQW32RA6OOCF2VGRRU4CQ6HLEWJMD27/

[ovirt-users] Re: Changing the ovirtmgmt IP address

[matthew.st...@fujitsu.com]

Found the answer:

Update /var/lib/vdsm/persistence/netconf/nets/ovritmgmt and reboot.

From: matthew.st...@fujitsu.com 
Sent: Monday, May 10, 2021 3:18 PM
To: users@ovirt.org
Subject: [ovirt-users] Changing the ovirtmgmt IP address

Version: 4.3.10

I'm attempting to change the IP address, netmask and gateway of the ovirtmgmt 
NIC of a host, but everytime I reboot the host, the old address/netmask/gateway 
re-assert themselves.

Where do I need to make the changes, so they will be permanent?

I've modified /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt and 
route-ovirtmgmt, but they don't stick through a reboot.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZQMPAP2D4YQFOHHNDY7DL5QRL5554QOT/

[ovirt-users] Changing the ovirtmgmt IP address

[matthew.st...@fujitsu.com]

Version: 4.3.10

I'm attempting to change the IP address, netmask and gateway of the ovirtmgmt 
NIC of a host, but everytime I reboot the host, the old address/netmask/gateway 
re-assert themselves.

Where do I need to make the changes, so they will be permanent?

I've modified /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt and 
route-ovirtmgmt, but they don't stick through a reboot.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZOATLTQSZNDJ34Q2ICGH6TQZCIRQDNEB/

[ovirt-users] Re: hosted-engine /var full

[matthew.st...@fujitsu.com]

Appliance hosted-engine on block storage (fc,iscsi).  Have you checked that you 
are not wasting space on the disk itself?

When I setup my hosted-engine, I created a 100GB lun, and told the setup 
routine to make a 85GB disk, which it did, however the appliance only used 30GB 
of that, leaving 55GB unused.

Using basic disk tools, you can add that space to the root file-system.  

Use 'fdisk' to create another partition from the unused space, and tag it for 
Linux LVM.

Use 'pvcreate' to mark it for LVM.

Use 'vgextend' to add it to the volume group that hold the root file-system.

Use 'lvextend' to extend the root file-system to the gained volume-group space.

-Original Message-
From: Pascal D  
Sent: Friday, May 7, 2021 6:52 AM
To: users@ovirt.org
Subject: [ovirt-users] hosted-engine /var full

I have an issue with my 4.3 hosted-engine. The /var is full. The directory 
taking 20G is /var/opt/rh/rh-postgresql10/lib/pgsql/data/base/data/16398

some of those files have size over 1GB.  Can they be safely removed?

TIA
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/7JRYG3L5BYXWFMPQHVRAXCGLYOYOHYLE/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/B3L27PYGZ5KOBZ7YSQK2UBX7PANY56HI/

[ovirt-users] Re: Unable to provide network acces to second cluster in DC

[matthew.st...@fujitsu.com]

If you assigned the network to the cluster, they should be available in the new 
VM dialog, once you selected the cluster.

-Original Message-
From: Miguel Garcia  
Sent: Thursday, April 29, 2021 1:28 PM
To: users@ovirt.org
Subject: [ovirt-users] Re: Unable to provide network acces to second cluster in 
DC

Browsing at the path above I see prodvlan and havlan listed and manage network 
settings is the same as Public1.
Compute > Clusters > Public2 > Logical Network > Manage Networks

The problem is that when I try to create a vm for cluster Public2 on the nic 
sections no nic profile are listed, it remains  option only.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/43UWWVOCLEFZPNQOADDCHBGVIJDVM2NL/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VTDRI4JIM55PZRATWRUQUTXJ2GPUWF6P/

[ovirt-users] Re: Unable to provide network acces to second cluster in DC

[matthew.st...@fujitsu.com]

Compute > Clusters > "Name" > Logical Network > Manage Networks

-Original Message-
From: Miguel Garcia  
Sent: Wednesday, April 28, 2021 12:20 PM
To: users@ovirt.org
Subject: [ovirt-users] Unable to provide network acces to second cluster in DC

I have created the following DC and cluster structure in my ovirt server

- Data Center Public
- - cluster-public1
- - cluster-public2

Also created a couple Logical Network for DC-Public
- - prodvlan
- - havlan

And added 4 host (two for each cluster because processor type) and each host 
has ports added to both logical networks (besides ovirtmgmt)

When I create a new vm in cluster public1 and add nics  I'm able to list 
prodvlan and havlan but when I try to create the vm for cluster public2 no 
logical networks are listed.

Any idea how to get logical networks listed for cluster public2?

Thanks in advance
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Y5IYRN3CJX4Y4I5DLTYWVIB4423FLJDR/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3WVR4JQEK4FUDV4COGJECPK2I4W35EAK/

[ovirt-users] Re: Ansible ovirt.ovirt_vm nics

[matthew.st...@fujitsu.com]

I believe I have identified the issue, variable inheritance.

The inventory I include to define the hosts, includes several classes.  
‘virtualmachines’ which the script uses to get the list of VMs it is going to 
process.  All VM defaults are defined within its ‘:vars’ section.

I also have groups of VMs where I want to override variables.   Unfortunately, 
what is being defined in ‘virtualmachines’ is not being override in the class 
level, because they are considered sibling classes.

I have found the ‘ansible_group_priority’ variable, which can be assigned at 
each class.  I assigned the entry in [virtualmachines:vars] with the value of 2 
(default is 1) and then in the other classes, I assigned a value of 3.

Now the variable in [class:vars] will override the variables in 
[virtualmachines:vars].   Of course the host level can still override all.

From: matthew.st...@fujitsu.com 
Sent: Thursday, April 22, 2021 2:01 PM
To: Martin Perina 
Cc: users@ovirt.org; Martin Necas 
Subject: [ovirt-users] Re: Ansible ovirt.ovirt_vm nics

It’s basically the one listed in the URL.   The changes I’ve made is to add 
some addition ‘defaults’, and the code I mentioned below, to select different 
nic profiles for vms that are on different networks.

I’m running an Oracle Linux 7u9 system, and the version of Ansible is 2.9.18

In my environment, I have created different networks, and labeled them based 
upon their vlan tag number (vlan20, vlan21, vlan22, …)

A VM can be created on any of these vlans, so I need to be able to select the 
nic profile within ‘ini’ file holding all the configuration information. 
(hostname, fqdn, IP address, etc…)


From: Martin Perina mailto:mper...@redhat.com>>
Sent: Thursday, April 22, 2021 2:51 AM
To: Stier, Matthew mailto:matthew.st...@fujitsu.com>>
Cc: users@ovirt.org<mailto:users@ovirt.org>; Martin Necas 
mailto:mne...@redhat.com>>
Subject: Re: [ovirt-users] Ansible ovirt.ovirt_vm nics

Hi Matthew,

Could you please share with us your playbook? Which ansible version are you 
using? Are you using ovirt_vm module from oVirt Ansible Collection which 
contains newer versions than the ovirt_vm module included in Ansible 2.9?

https://docs.ansible.com/ansible/latest/collections/ovirt/ovirt/ovirt_vm_module.html

Thanks,
Martin


On Thu, Apr 22, 2021 at 9:28 AM 
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> 
mailto:matthew.st...@fujitsu.com>> wrote:
The ‘nics’ section of ovirt_vm is vague and with nearly no examples.

My playbook is based upon 
https://blogs.oracle.com/scoter/ansible-with-oracle-linux-virtualization-manager-olvm

I’ve made several modifications, (more default) and added a few lines, which I 
believe is supposed to assign vnic profiles to the primary vnic (nic1), based 
upon the definition of ‘vm_nic1_profile’ defined in an included ‘ini’ file. 
(the profile defaulting to blank if it is not defined in the ini file.)

It isn’t doing its job.

  nics:

-   name: “nic1”

profile_name: "{{ hostvars[item]['vm_nic1_profile'] | default('') }}”


The playbook runs without complaint.  If I run it with option ‘-vvv’ part of 
the output lists the variables, but the ‘nics’ variable is an empty list 
(nics[])

Any hints on what I’m doing wrong?   I’ve checked the forum, but it tends to 
strip leading spaces, which is bad for indent sensitive code.
___
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to 
users-le...@ovirt.org<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/MEZLXGSSRCRJRSMME7J3Y5XQ2AGYUWI4/


--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/QTE4FA7CY4UOOZIZMJAROZBL7T6DEWUA/

[ovirt-users] Re: Attempting to detach a storage domain

[matthew.st...@fujitsu.com]

Problem solved.

I used Ansible and ran 'grep Duplicate /var/log/vdsm/vdsm.log' on all 121 of my 
hosts.  Only the log of the host currently running the hosted-engine had 
entries.

I migrated the hosted-engine, and all other VMs to other hosts, and then put 
the affected host into maintenance. I then undeployed it; then patched it; and 
finally deployed it.  

Its back up and running and taking VMs, and no more 'Duplicate keys' errors.

-Original Message-
From: matthew.st...@fujitsu.com  
Sent: Monday, April 26, 2021 7:18 PM
To: Nir Soffer 
Cc: users@ovirt.org
Subject: [ovirt-users] Re: Attempting to detach a storage domain

There is no /var/log/vdsm directory on the hosted-engine.

This is from the current host, hosting the engine:  aaa.bbb.ccc.100 is the 
hosted-engine

2021-04-26 19:12:42,760-0500 INFO  (jsonrpc/2) [api.host] START 
getCapabilities() from=:::aaa.bbb.ccc.100,37812 (api:48)
2021-04-26 19:12:42,763-0500 INFO  (jsonrpc/2) [api.host] FINISH 
getCapabilities error=internal error: Duplicate key 
from=:::168.127.151.100,37812 (api:52)
2021-04-26 19:12:42,763-0500 ERROR (jsonrpc/2) [jsonrpc.JsonRpcServer] Internal 
server error (__init__:350) Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 345, in 
_handle_request
res = method(**params)
  File "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 198, in 
_dynamicMethod
result = fn(*methodArgs)
  File "", line 2, in getCapabilities
  File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in method
ret = func(*args, **kwargs)
  File "/usr/lib/python2.7/site-packages/vdsm/API.py", line 1371, in 
getCapabilities
c = caps.get()
  File "/usr/lib/python2.7/site-packages/vdsm/host/caps.py", line 95, in get
machinetype.compatible_cpu_models())
  File "/usr/lib/python2.7/site-packages/vdsm/common/cache.py", line 43, in 
__call__
value = self.func(*args)
  File "/usr/lib/python2.7/site-packages/vdsm/machinetype.py", line 142, in 
compatible_cpu_models
all_models = domain_cpu_models(c, arch, cpu_mode)
  File "/usr/lib/python2.7/site-packages/vdsm/machinetype.py", line 97, in 
domain_cpu_models
domcaps = conn.getDomainCapabilities(None, arch, None, virt_type, 0)
  File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", 
line 131, in wrapper
ret = f(*args, **kwargs)
  File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 94, in 
wrapper
return func(inst, *args, **kwargs)
  File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3844, in 
getDomainCapabilities
if ret is None: raise libvirtError ('virConnectGetDomainCapabilities() 
failed', conn=self)
libvirtError: internal error: Duplicate key
2021-04-26 19:12:42,764-0500 INFO  (jsonrpc/2) [jsonrpc.JsonRpcServer] RPC call 
Host.getCapabilities failed (error -32603) in 0.00 seconds (__init__:312)


-Original Message-
From: Nir Soffer 
Sent: Monday, April 26, 2021 5:12 PM
To: Stier, Matthew 
Cc: Benny Zlotnik ; users@ovirt.org
Subject: Re: [ovirt-users] Re: Attempting to detach a storage domain

On Tue, Apr 27, 2021 at 12:48 AM matthew.st...@fujitsu.com 
 wrote:
>
> I'm getting tons of these in the
> hosted-engine:/var/log/ovirt-engine/engine.log
>
> 2021-04-26 16:40:40,260-05 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (EE-ManagedThreadFactory-engineScheduled-Thread-8) [] EVENT_ID: 
> VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ..zzz command Get 
> Host Capabilities failed: Internal JSON-RPC error: {'reason':
> 'internal error: Duplicate key'}

This looks like bad response from vdsm. Can you share the vdsm log from the 
host ..zzz?

/var/log/vdsm/vdsm.log

Nir

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Z2GOGEZ2DZX34ADZ5L2BATIINYGVWYJD/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/SR23RTBYNLDO4BFYICPADGZLCM325JMN/

[ovirt-users] Re: Attempting to detach a storage domain

[matthew.st...@fujitsu.com]

There is no /var/log/vdsm directory on the hosted-engine.

This is from the current host, hosting the engine:  aaa.bbb.ccc.100 is the 
hosted-engine

2021-04-26 19:12:42,760-0500 INFO  (jsonrpc/2) [api.host] START 
getCapabilities() from=:::aaa.bbb.ccc.100,37812 (api:48)
2021-04-26 19:12:42,763-0500 INFO  (jsonrpc/2) [api.host] FINISH 
getCapabilities error=internal error: Duplicate key 
from=:::168.127.151.100,37812 (api:52)
2021-04-26 19:12:42,763-0500 ERROR (jsonrpc/2) [jsonrpc.JsonRpcServer] Internal 
server error (__init__:350)
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 345, in 
_handle_request
res = method(**params)
  File "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 198, in 
_dynamicMethod
result = fn(*methodArgs)
  File "", line 2, in getCapabilities
  File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in method
ret = func(*args, **kwargs)
  File "/usr/lib/python2.7/site-packages/vdsm/API.py", line 1371, in 
getCapabilities
c = caps.get()
  File "/usr/lib/python2.7/site-packages/vdsm/host/caps.py", line 95, in get
machinetype.compatible_cpu_models())
  File "/usr/lib/python2.7/site-packages/vdsm/common/cache.py", line 43, in 
__call__
value = self.func(*args)
  File "/usr/lib/python2.7/site-packages/vdsm/machinetype.py", line 142, in 
compatible_cpu_models
all_models = domain_cpu_models(c, arch, cpu_mode)
  File "/usr/lib/python2.7/site-packages/vdsm/machinetype.py", line 97, in 
domain_cpu_models
domcaps = conn.getDomainCapabilities(None, arch, None, virt_type, 0)
  File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", 
line 131, in wrapper
ret = f(*args, **kwargs)
  File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 94, in 
wrapper
return func(inst, *args, **kwargs)
  File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3844, in 
getDomainCapabilities
if ret is None: raise libvirtError ('virConnectGetDomainCapabilities() 
failed', conn=self)
libvirtError: internal error: Duplicate key
2021-04-26 19:12:42,764-0500 INFO  (jsonrpc/2) [jsonrpc.JsonRpcServer] RPC call 
Host.getCapabilities failed (error -32603) in 0.00 seconds (__init__:312)


-Original Message-
From: Nir Soffer  
Sent: Monday, April 26, 2021 5:12 PM
To: Stier, Matthew 
Cc: Benny Zlotnik ; users@ovirt.org
Subject: Re: [ovirt-users] Re: Attempting to detach a storage domain

On Tue, Apr 27, 2021 at 12:48 AM matthew.st...@fujitsu.com 
 wrote:
>
> I'm getting tons of these in the 
> hosted-engine:/var/log/ovirt-engine/engine.log
>
> 2021-04-26 16:40:40,260-05 ERROR 
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
> (EE-ManagedThreadFactory-engineScheduled-Thread-8) [] EVENT_ID: 
> VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ..zzz command Get 
> Host Capabilities failed: Internal JSON-RPC error: {'reason': 
> 'internal error: Duplicate key'}

This looks like bad response from vdsm. Can you share the vdsm log from the 
host ..zzz?

/var/log/vdsm/vdsm.log

Nir

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Z2GOGEZ2DZX34ADZ5L2BATIINYGVWYJD/

[ovirt-users] Re: Attempting to detach a storage domain

[matthew.st...@fujitsu.com]

I'm getting tons of these in the hosted-engine:/var/log/ovirt-engine/engine.log

2021-04-26 16:40:40,260-05 ERROR 
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
(EE-ManagedThreadFactory-engineScheduled-Thread-8) [] EVENT_ID: 
VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ..zzz command Get Host 
Capabilities failed: Internal JSON-RPC error: {'reason': 'internal error: 
Duplicate key'}

No idea who has the 'Duplicate key'.



-Original Message-
From: Benny Zlotnik  
Sent: Sunday, April 25, 2021 2:50 AM
To: Stier, Matthew 
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Attempting to detach a storage domain

I think engine.log would be a good place to start, it would likely tell us on 
which host there's a problem (if there is one)


On Sun, Apr 25, 2021 at 10:22 AM matthew.st...@fujitsu.com 
 wrote:
>
> Which logs, on which hosts should I be looking through?
>
> I have a hint of that from my research, but all 121 hosts are up and running.
>
> -Original Message-
> From: Benny Zlotnik 
> Sent: Sunday, April 25, 2021 1:53 AM
> To: Stier, Matthew 
> Cc: users@ovirt.org
> Subject: Re: [ovirt-users] Attempting to detach a storage domain
>
> What do the logs say?
> This usually means that not all hosts were able to disconnect from it
>
> On Sun, Apr 25, 2021 at 9:45 AM matthew.st...@fujitsu.com 
>  wrote:
> >
> > Ovirt: 4.3.10
> >
> > Storage: iSCSI
> >
> >
> >
> > Problem: Attempting to place storage domain into ‘maintenance’ in 
> > preparation for detachment and destruction, has left it hung in a 
> > ‘Preparation for maintenance’ state.
> >
> >
> >
> > I have three storage domain I need to put into maintenance, detach and 
> > delete.  When I placed place the first, and smallest (100GB) into 
> > maintenance mode, it switched to ‘Preparing for Maintenance’, and has stuck 
> > there for hours.
> >
> >
> >
> > Early on, I was able to re-activate it, but I do want to remove for use 
> > somewhere else, and I want make sure I can remove it, before I try to do 
> > the same with two 11TB storage domains.
> >
> > ___
> > Users mailing list -- users@ovirt.org To unsubscribe send an email 
> > to users-le...@ovirt.org Privacy
> > Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> > https://lists.ovirt.org/archives/list/users@ovirt.org/message/HY3LWX
> > 7H
> > MN56SDHNQWB3MDXLLU7GNLGX/
>

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NR3HF7AGULKVGN2YKZECXCKDESYI2BC2/

[ovirt-users] Re: Attempting to detach a storage domain

[matthew.st...@fujitsu.com]

Which logs, on which hosts should I be looking through?

I have a hint of that from my research, but all 121 hosts are up and running.

-Original Message-
From: Benny Zlotnik  
Sent: Sunday, April 25, 2021 1:53 AM
To: Stier, Matthew 
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Attempting to detach a storage domain

What do the logs say?
This usually means that not all hosts were able to disconnect from it

On Sun, Apr 25, 2021 at 9:45 AM matthew.st...@fujitsu.com 
 wrote:
>
> Ovirt: 4.3.10
>
> Storage: iSCSI
>
>
>
> Problem: Attempting to place storage domain into ‘maintenance’ in preparation 
> for detachment and destruction, has left it hung in a ‘Preparation for 
> maintenance’ state.
>
>
>
> I have three storage domain I need to put into maintenance, detach and 
> delete.  When I placed place the first, and smallest (100GB) into maintenance 
> mode, it switched to ‘Preparing for Maintenance’, and has stuck there for 
> hours.
>
>
>
> Early on, I was able to re-activate it, but I do want to remove for use 
> somewhere else, and I want make sure I can remove it, before I try to do the 
> same with two 11TB storage domains.
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org Privacy 
> Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/HY3LWX7H
> MN56SDHNQWB3MDXLLU7GNLGX/

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/YECIDBJCU4ADLLDWVVUPKACFXHIGLZLY/

[ovirt-users] Attempting to detach a storage domain

[matthew.st...@fujitsu.com]

Ovirt: 4.3.10
Storage: iSCSI

Problem: Attempting to place storage domain into 'maintenance' in preparation 
for detachment and destruction, has left it hung in a 'Preparation for 
maintenance' state.

I have three storage domain I need to put into maintenance, detach and delete.  
When I placed place the first, and smallest (100GB) into maintenance mode, it 
switched to 'Preparing for Maintenance', and has stuck there for hours.

Early on, I was able to re-activate it, but I do want to remove for use 
somewhere else, and I want make sure I can remove it, before I try to do the 
same with two 11TB storage domains.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HY3LWX7HMN56SDHNQWB3MDXLLU7GNLGX/

[ovirt-users] Re: Ansible ovirt.ovirt_vm nics

[matthew.st...@fujitsu.com]

It’s basically the one listed in the URL.   The changes I’ve made is to add 
some addition ‘defaults’, and the code I mentioned below, to select different 
nic profiles for vms that are on different networks.

I’m running an Oracle Linux 7u9 system, and the version of Ansible is 2.9.18

In my environment, I have created different networks, and labeled them based 
upon their vlan tag number (vlan20, vlan21, vlan22, …)

A VM can be created on any of these vlans, so I need to be able to select the 
nic profile within ‘ini’ file holding all the configuration information. 
(hostname, fqdn, IP address, etc…)


From: Martin Perina 
Sent: Thursday, April 22, 2021 2:51 AM
To: Stier, Matthew 
Cc: users@ovirt.org; Martin Necas 
Subject: Re: [ovirt-users] Ansible ovirt.ovirt_vm nics

Hi Matthew,

Could you please share with us your playbook? Which ansible version are you 
using? Are you using ovirt_vm module from oVirt Ansible Collection which 
contains newer versions than the ovirt_vm module included in Ansible 2.9?

https://docs.ansible.com/ansible/latest/collections/ovirt/ovirt/ovirt_vm_module.html

Thanks,
Martin


On Thu, Apr 22, 2021 at 9:28 AM 
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> 
mailto:matthew.st...@fujitsu.com>> wrote:
The ‘nics’ section of ovirt_vm is vague and with nearly no examples.

My playbook is based upon 
https://blogs.oracle.com/scoter/ansible-with-oracle-linux-virtualization-manager-olvm

I’ve made several modifications, (more default) and added a few lines, which I 
believe is supposed to assign vnic profiles to the primary vnic (nic1), based 
upon the definition of ‘vm_nic1_profile’ defined in an included ‘ini’ file. 
(the profile defaulting to blank if it is not defined in the ini file.)

It isn’t doing its job.

  nics:

-   name: “nic1”

profile_name: "{{ hostvars[item]['vm_nic1_profile'] | default('') }}”


The playbook runs without complaint.  If I run it with option ‘-vvv’ part of 
the output lists the variables, but the ‘nics’ variable is an empty list 
(nics[])

Any hints on what I’m doing wrong?   I’ve checked the forum, but it tends to 
strip leading spaces, which is bad for indent sensitive code.
___
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to 
users-le...@ovirt.org<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/MEZLXGSSRCRJRSMME7J3Y5XQ2AGYUWI4/


--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Z7CIE5MDZTJ3QFPJENCPH5KRZP7U42LI/

[ovirt-users] Ansible ovirt.ovirt_vm nics

[matthew.st...@fujitsu.com]

The 'nics' section of ovirt_vm is vague and with nearly no examples.

My playbook is based upon 
https://blogs.oracle.com/scoter/ansible-with-oracle-linux-virtualization-manager-olvm

I've made several modifications, (more default) and added a few lines, which I 
believe is supposed to assign vnic profiles to the primary vnic (nic1), based 
upon the definition of 'vm_nic1_profile' defined in an included 'ini' file. 
(the profile defaulting to blank if it is not defined in the ini file.)

It isn't doing its job.

  nics:

-   name: "nic1"

profile_name: "{{ hostvars[item]['vm_nic1_profile'] | default('') }}"


The playbook runs without complaint.  If I run it with option '-vvv' part of 
the output lists the variables, but the 'nics' variable is an empty list 
(nics[])

Any hints on what I'm doing wrong?   I've checked the forum, but it tends to 
strip leading spaces, which is bad for indent sensitive code.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/MEZLXGSSRCRJRSMME7J3Y5XQ2AGYUWI4/

[ovirt-users] Re: How to detach FC Storage Domain

[matthew.st...@fujitsu.com]

If you destroyed, no.

To migrate the storage, intact, you need to shutdown the VMs, place the storage 
domain into maintenance, then detach, and remove the storage domain.  And then 
do an attach on the new DC.

I've been doing this iSCSI to migrate VMs from an existing DC to a new DC to 
alleviate load on the first.  (I had to spin up a new DC.  I was going to 
exceed the limit of hosts on the original one.)

-Original Message-
From: Miguel Garcia  
Sent: Thursday, April 8, 2021 12:04 PM
To: users@ovirt.org
Subject: [ovirt-users] Re: How to detach FC Storage Domain

Another quetion, I had done this before with NFS storage domain types and can 
list vms, templates and disk in reattached storage domain but for this FC I do 
not see any.
Do I need to perform an additioal action?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/7KAK6MGWDVTECGDSC77OUYZLIACRFRGS/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/METD6W44L6B3765M6QLT5SMQIHPCTTCG/

[ovirt-users] Re: Small SAN suggestions?

[matthew.st...@fujitsu.com]

Disks + Linux + iSCSI target   (Need I say more)

-Original Message-
From: Chris Adams  
Sent: Wednesday, February 17, 2021 12:26 PM
To: users@ovirt.org
Subject: [ovirt-users] Small SAN suggestions?

I have an oVirt cluster with a significantly oversized SAN for storage (iSCSI, 
have 30TB storage but am only using about 2.5TB).  I'm looking for a more 
appropriately-sized setup.  Any suggestions?

This is currently a Dell EqualLogic array - it doesn't look like they really 
even have a smallish VM-storage (at least that isn't VMware) product these 
days.  Looking at our stats, we're doing more write than read ops (outside of 
when backups run), typically under 150 write ops per second.

I'm not looking at replacing servers right now, so not looking at 
hyperconverged.

Just interested in what hardware people are using these days for a setup this 
size.  Thanks.
--
Chris Adams 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/RYDDMSBYKLNNZ5NUTXMC2UDD4CBMWJ3X/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GU2XRZNEKSUBZ3MNTN4LSVVZS6WWJZ3R/

[ovirt-users] Using VNC console on new cluster

[matthew.st...@fujitsu.com]

I'm running OLVM 4.3.6 (Consider it oVIrt 4.3.6).

When I created my second cluster, I could not access the hosts on the second 
cluster using VNC (haven't tried to get html5 working).

Since I was forced to power off everything, (power outage), I've had no issue 
with accessing the console on any host in the second cluster.

I have just created a third cluster.  Same problem.  No issues with hosts on 
the first two clusters, but any host I've migrated to the third cluster, I 
cannot access the console.

When I select a host, click on the button for 'Console' I get a download on my 
browser, I tell the browser to open the download, and I get, what I think is 
the Spice application starting and quitting in a second or two.

I'm not looking forward to telling my management that we need another power 
outage.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/FDGGE2MKNE24CVLBM6WQ6UIJGD7CRRB2/

[ovirt-users] Re: Newer kernel for oVirt Node NG

[matthew.st...@fujitsu.com]

‘Node’ images are just minimal CentOS plus all the packages for this release, 
in a sub-DVD sized ISO.  Once it is installed, the operating system is still 
CentOS, and can be patched/modified, including installing alternative kernels.

If it fails, boot back to the original kernel, and remove the package from 
Elrepo, or at worse, re-install.

From: Shantur Rathore 
Sent: Tuesday, February 9, 2021 11:11 AM
To: Stier, Matthew ; users 
Subject: Re: [ovirt-users] Newer kernel for oVirt Node NG

Thanks Matthew,

Are you sure about this?
I thought oVirt Node NG images are immutable

On Tue, Feb 9, 2021 at 3:42 PM 
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> 
mailto:matthew.st...@fujitsu.com>> wrote:
Elrepo.org

From: Shantur Rathore mailto:rathor...@gmail.com>>
Sent: Tuesday, February 9, 2021 9:28 AM
To: users mailto:users@ovirt.org>>
Subject: [ovirt-users] Newer kernel for oVirt Node NG

Hi oVirt Users,

I am trying to test some vfio related stuff on oVirt Node NG 4.4.4 based host.
What would be the easiest way to have a 5.x kernel on this node?
I don't mind compiling if it needs to.

Cheers,
Shantur
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/7LOXOR6QZJDM5U32SC3DAKIFVGVD3O3F/

[ovirt-users] Using Ansible ovirt_vm

[matthew.st...@fujitsu.com]

Over this weekend, I need to shutdown and restart 1500 VMs while I do work.  
Modifying an Ansible playbook I have, to accomplish that, seems easy enough.

Last weekend I used the web gui and edited each Virtual Machine and changed the 
'cluster' to the one I wanted to assign it too.  Now I would like to automate 
this with Ansible.

In between shutting them down and starting them up, I need to change the 
cluster registration of quite a few of the hosts, and I have concerns on how to 
do that.

The Ansible ovirt_vm documentation on this is a bit fuzzy.  I'm assuming it for 
assigning the cluster, but in some examples it appears to be used as a filter. 
Which changes the meaning.  Is it "start the VM in this cluster" or "start this 
VM if it is in this cluster".

The playbook I'm working from is straight forward and has three tasks.

First, an ovirt_auth task to log into the SHE.

Second, an ovirt_vm task which loops though the group of virtualmachines, 
defined in an 'ini' file.

Third, an ovirt_auth task to logout from the SHE.


For stopping, I assume I specify a name, and state to 'stopped' and that should 
initiate the shutdown.

For starting, I assume I should set the state to 'running'.

For changing the cluster a vm is assigned to, do I simply need to use the 
'cluster' parameter with a value of new cluster?  Are there other actions that 
need to be taken?  The VM need to be un and re-registered for the change to 
take effect?  I'd like to make the cluster change individual playbook, but 
could it be added to the start or stop playbook.  (ie: stop and change cluster, 
start on new cluster)

Waiting for the wisdom of the community.

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/54DMM5ZJVAND2J55VLJZ7KJKK3GYOEPV/

[ovirt-users] Re: VM console does not work with new cluster.

[matthew.st...@fujitsu.com]

gt; QQKDAh0bHRkLmNvbTEdMBsGA1UE\nAwwUb29lbmcudGx0ZC5jb20uMTc3MzAwggEiMA0G
> CSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCg\nYT9S7hWiXQUzAqFQKbg2nMjwyHDmb/J
> mKeJAUVZqNKRg1q80IpWyoM12Zw0nX1eTwMnVY/JtJON4\n13PoEC3So8nniGt+wtHr44
> ysvCWfU0SBk/ZPnKmQ58o5MlSkidHwySChXfVPYLPWeUJ1JUrujna/\nCbi5bmmjx2pqw
> LrZXX8Q5NO2MRKOTs0Dtg16Q6z+a3cXLIffVJfhPGS3AkIh6nznNaDeH5gFZZbd\nr3DK
> E4xrpdw/7y6CgjmHe4vwGxOIyE+gElZ/lVtqznLMwohz7wgtgsDA36277mujNyMjMbrSF
> heu\n5WfbIa9VVSZWEkISVq6eswLOQ1IRaFyJsFN9AgMBAAGjga0wgaowHQYDVR0OBBYE
> FDYEqJOMqN8+\nQhCP7DAkqF3RZMFdMGgGA1UdIwRhMF+AFDYEqJOMqN8+QhCP7DAkqF3
> RZMFdoUOkQTA/MQswCQYD\nVQQGEwJVUzERMA8GA1UECgwIdGx0ZC5jb20xHTAbBgNVBA
> MMFG9vZW5nLnRsdGQuY29tLjE3NzMw\nggIQADAPBgNVHRMBAf8EBTADAQH/MA4GA1UdD
> wEB/wQEAwIBBjANBgkqhkiG9w0BAQsFAAOCAQEA\nAKs0/yQWkoOkGcL0PjF9ijekdMmj
> rLZGyh5uLot7h9s/Y2+5l9n9IzEjjx9chi8xwt6MBsR6/nBT\n/skcciv2veM22HwNGjd
> rHvhfbZFnZsGe2TU60kGzKjlv1En/8Pgd2aWBcwTlr+SErBXkehNEJRj9\n1saycPgwS4
> pHS04c2+4JMhpe+hxgsO2+N/SYkP95Lf7ZQynVsN/SKx7X3cWybErCqoB7G7McqaHN\nV
> Ww+QNXo5islWUXqeDc3RcnW3kq0XUEzEtp6hoeRcLKO99QrAW31zqU/QY+EeZ6Fax1O/j
> rDafZn\npTs0KJFNgeVnUhKanB29ONy+tmnUmTAgPMaKKw==\n-END
> CERTIFICATE-\n
> 
> 
> the firewall list of the host ohost1.tltd.com(192.168.10.160) is:
> 
> [root@ohost1 ~]# firewall-cmd --list-all public (active)
>   target: default
>   icmp-block-inversion: no
>   interfaces: bond0 ovirtmgmt
>   sources:
>   services: cockpit dhcpv6-client libvirt-tls ovirt-imageio ovirt- 
> vmconsole snmp ssh vdsm
>   ports: 22/tcp 6081/udp
>   protocols:
>   masquerade: no
>   forward-ports:
>   source-ports:
>   icmp-blocks:
>   rich rules:
> 
> 
> Please give me some advice,thanks.
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -Original Message-
> From: users-boun...@ovirt.org  On Behalf Of 
> Strahil Nikolov via Users
> Sent: Wednesday, January 13, 2021 3:15 AM
> To: matthew.st...@fujitsu.com; eev...@digitaldatatechs.com; 
> users@ovirt.org
> Subject: [ovirt-users] Re: VM console does not work with new cluster.
> 
> 
> > It’s just that once the VM has been moved to the new cluster, 
> > selecting console results in the same behavior, but that virt- 
> > viewer starts and stops within a second.
> 
> In order to debug, you will need to compare the files provided when 
> you press the "console" button from both clusters and identify the 
> problem.
> 
> Have you compared the firewalld ports on 2 nodes (old and new
> cluster) ?
> 
> Best Regards,
> Strahil Nikolov
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org Privacy
> Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/3U5ZIELT
> USPKT6KZ7UZWWFCDRNCF5YLN/
> 
> 

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/N7JRNNAJDZHA4KC6SJP4FNFN5V3HLK6X/

[ovirt-users] Re: VM console does not work with new cluster.

[matthew.st...@fujitsu.com]

Stop/Edit/Start is the only mechanism available.   You cannot change the 
cluster value for a VM, until it is stopped.

The VMs have static addresses.  The VM is fully function on the new cluster.  

It’s just that once the VM has been moved to the new cluster, selecting console 
results in the same behavior, but that virt-viewer starts and stops within a 
second.
 

-Original Message-
From: eev...@digitaldatatechs.com  
Sent: Tuesday, January 12, 2021 11:40 AM
To: Stier, Matthew ; 'Strahil Nikolov' 
; users@ovirt.org
Subject: RE: [ovirt-users] Re: VM console does not work with new cluster.

Did you shut down the vm's and start them up on the new cluster? It sounds like 
they are associated with the default still and that's where virt viewer is 
looking for them..

Eric Evans
Digital Data Services LLC.
304.660.9080


-Original Message-
From: matthew.st...@fujitsu.com  
Sent: Tuesday, January 12, 2021 12:29 PM
To: Strahil Nikolov ; users@ovirt.org
Subject: [ovirt-users] Re: VM console does not work with new cluster.

Sounds like it, but VMs are running on the same network, with the same IP 
address.  The only firewall involved are on the hosts, and they are both 
firewalld, and have the same ports and service permitted.

-Original Message-
From: Strahil Nikolov 
Sent: Sunday, January 10, 2021 10:57 PM
To: users@ovirt.org; Stier, Matthew 
Subject: Re: [ovirt-users] VM console does not work with new cluster.

This sounds like firewall issue.

Best Regards,
Strahil Nikolov






В понеделник, 11 януари 2021 г., 01:05:47 Гринуич+2, Matthew Stier 
 написа: 





I've added several new hosts to my data center, and instead of adding them to 
my 'default' cluster, I created a new cluster ('two').

I can access the VM console (virt-viewer) when the VM is on the 'default' 
cluster, but once moved to the the new cluster, virt-viewer pops up and 
disappears in sub-second fashion.  Moving the VM back to 'default', restores 
access.

I'm running virt-viewer 9.0-256 on my Windows 10 Pro laptop. (for months)

I'm running Oracle Linux Virtualization Manager on Oracle Linux 7u9 hosts.

The new ('two') cluster hosts are connected to the same networks as the 
original systems ('default'). (They have the same assigned IP address.)

Firewalld is reporting the same ports and services enabled on 'default' and 
'two' hosts.  The VM's are not running firewalls.

Apparently I'm missing something.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/AAKYLXLBV2FCL5TLYT32IY6IT4G43WLH/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/CPQPPOYSQGANLSC2ZP36UYQPFHAUC647/

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/RFYNLB53ALNITFTSEL5GF7IZANUGEDQZ/

[ovirt-users] Re: VM console does not work with new cluster.

[matthew.st...@fujitsu.com]

Sounds like it, but VMs are running on the same network, with the same IP 
address.  The only firewall involved are on the hosts, and they are both 
firewalld, and have the same ports and service permitted.

-Original Message-
From: Strahil Nikolov  
Sent: Sunday, January 10, 2021 10:57 PM
To: users@ovirt.org; Stier, Matthew 
Subject: Re: [ovirt-users] VM console does not work with new cluster.

This sounds like firewall issue.

Best Regards,
Strahil Nikolov






В понеделник, 11 януари 2021 г., 01:05:47 Гринуич+2, Matthew Stier 
 написа: 





I've added several new hosts to my data center, and instead of adding them to 
my 'default' cluster, I created a new cluster ('two').

I can access the VM console (virt-viewer) when the VM is on the 'default' 
cluster, but once moved to the the new cluster, virt-viewer pops up and 
disappears in sub-second fashion.  Moving the VM back to 'default', restores 
access.

I'm running virt-viewer 9.0-256 on my Windows 10 Pro laptop. (for months)

I'm running Oracle Linux Virtualization Manager on Oracle Linux 7u9 hosts.

The new ('two') cluster hosts are connected to the same networks as the 
original systems ('default'). (They have the same assigned IP address.)

Firewalld is reporting the same ports and services enabled on 'default' and 
'two' hosts.  The VM's are not running firewalls.

Apparently I'm missing something.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/AAKYLXLBV2FCL5TLYT32IY6IT4G43WLH/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/CPQPPOYSQGANLSC2ZP36UYQPFHAUC647/

[ovirt-users] Breaking up a oVirt cluster on storage domain boundary.

[matthew.st...@fujitsu.com]

Is it possible to break up an oVirt cluster into multiple clusters?

I have an Oracle Linux Virtualization Manager 4.3.6 cluster (think oVirt 4.3.6) 
that is hosting four different classes of VM's.

I have acquired some additional hosts, and instead of adding them to my 
"default" cluster, I want to create three new clusters, and migrate each class 
of VM to its own cluster.

Each class has its own network, and storage domains.

Can I migrate storage domains, and thus all the VMs within that storage domain?

Or will I need to build new cluster, with new storage domains, and migrate the 
VMs?

Most of my VMs are built from templates.  I assume that those cloned from 
templates will not be an issue.  But some of my classes are thin provisioned, 
and I suspect I will have an issue with migrating those at the VM level, which 
is why I want to migrate them at the storage domain level.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/72GMI2ULIQTYQQ3FD6YFFN6T75CHIEAT/

[ovirt-users] Re: what difference between enterprise Linux hosts and oVirt Nodes ?

[matthew.st...@fujitsu.com]

Nothing much really.  It is two ways to get to the same result.

Use a CentOS minimal OS install, plus the oVirt packages from the repository.

Or an oVirt Node ISO with all of the necessary package included.  Patchable and 
upgradable from the respective repositories.

From: tommy 
Sent: Monday, December 7, 2020 8:53 PM
To: 'users' 
Subject: [ovirt-users] what difference between enterprise Linux hosts and oVirt 
Nodes ?

Enterprise Linux hosts (Enterprise Linux hosts) and oVirt Nodes (image-based 
hypervisors) are the two supported types of host. Hosts use Kernel-based 
Virtual Machine (KVM) technology and provide resources used to run virtual 
machines.

But what difference between the Enterprise Linux Hosts and oVirt Nodes ? Please 
give me some explain in details,thanks!


___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DG5CZRENDWZX7QA6DYKIFIXGZWXQHUB/

[ovirt-users] Re: Deploy oVirt Engine fail behind proxy

[matthew.st...@fujitsu.com]

Define ‘proxy’ with /etc/yum.conf.

From: Simon Coter 
Sent: Tuesday, November 10, 2020 9:59 AM
To: Matteo Bonardi 
Cc: Strahil Nikolov ; users 
Subject: [ovirt-users] Re: Deploy oVirt Engine fail behind proxy

Hi Matteo,

this one is the solution we’ve applied on OLVM that should also work for oVirt:

Before Deploying Self Hosted Engine(SHE) update the below lines in 
/usr/share/ansible/roles/ovirt.hosted-engine-setup/hooks/enginevm_before_engine_setup/install_pre_setup_packages.yml

From
- name:Install oVirt Engine packages for restoring backup
package:
name: "ovirt-engine"
state: present
when: ovirt_engine_setup_product_type | lower == 'ovirt'
 To
-name: Install oVirt Engine packages for restoring backup
package:
 name: "ovirt-engine"
 state: present
environment:
 https_proxy: 
 http_proxy: 
when: ovirt_engine_setup_product_type | lower == 'ovirt'

In place of  add your own proxy; example: http://myproxy:3128

Hope this helps.

Simon


On Nov 10, 2020, at 4:45 PM, Matteo Bonardi 
mailto:mbon...@gmail.com>> wrote:

Hi Strahil,

How can I define that task and pass it to the deploy?

Thanks,
Matteo
Il mar 10 nov 2020, 16:33 Strahil Nikolov 
mailto:hunter86...@yahoo.com>> ha scritto:
Did anyone try to define a task to deploy the variables in the HostedEngine 
before the task?

For example (take only the task):
---
- name: Deploy proxy
 hosts: localhost
 tasks:
 - name: Deploy_proxy
   blockinfile:
 block:
   
http_proxy=http://myproxy.localdomain:3399
   
https_proxy=https://myproxy.localdomain:3340
   no_proxy=localhost
 create: True
 mode: "0444"
 owner: "root"
 selevel: "s0"
 serole: "object_r"
 setype: "bin_t"
 seuser: "system_u"
 state: "present"
 path: "/etc/profile.d/proxy.sh"
   delegate_to: localhost

And the result is:
[root@engine ~]# echo $http_proxy
http://myproxy.localdomain:3399
[root@engine ~]# echo $https_proxy
https://myproxy.localdomain:3340
[root@engine ~]# echo $no_proxy
localhost


Best Regards,
Strahil Nikolov







В вторник, 10 ноември 2020 г., 12:17:52 Гринуич+2, Gianluca Cecchi 
mailto:gianluca.cec...@gmail.com>> написа:





On Tue, Nov 10, 2020 at 8:55 AM Matteo Bonardi 
mailto:mbon...@gmail.com>> wrote:
>> On Tue, Nov 10, 2020 at 9:14 AM Matteo Bonardi 
>> https://urldefense.com/v3/__http:/gmail.com__;!!GqivPVa7Brio!JHkvRkiLdGTkZ9bIiVhZDaA8jR8Qfb_WIHV3oQYAfjyTMX_L4QpqMnmlhA4tE7wC$>
>>  wrote:
>>
>> Someone recently reported on this list that setting both environment
>> variables http_proxy and https_proxy worked for them.
>
>

yes it was me here:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/D5WQSM7OZNKJQK3L5CN367W2TRVZZVHZ/

But in my case it was simpler because the engine was external.
With hosted engine it is indeed a problem that should be addressed I think

Gianluca


___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to 
users-le...@ovirt.org
Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/RJ4MQDQDJUNE67FHXI5C5SP62FO6RTLY/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to 
users-le...@ovirt.org
Privacy Statement: 

[ovirt-users] Re: setting routing rules for guests?

[matthew.st...@fujitsu.com]

I had a need for this on one of my clusters.  Spun up a VM to host, installed 
and configured the software.

-Original Message-
From: yam yam  
Sent: Tuesday, November 10, 2020 12:08 AM
To: users@ovirt.org
Subject: [ovirt-users] Re: setting routing rules for guests?

Thanks for the reply!

Do you know why oVirt doesn't support such basic(at least to me) features like 
NAT, dhcp server, ...?
it seems somewhat harsh to the users. just curious

Sincerely,
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BM63KMSRQWGNMYQUEZOQF676COQNEPDJ/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3Y7HCGNRKPOIDBLIW7I2DMXYHUDQTEDA/

[ovirt-users] Migrate hosted-engine to new storage domain

[matthew.st...@fujitsu.com]

I've migrated my iSCSI storage to a new array, and the only thing remaining is 
to migrate the hosted-engine.

Any directions on how I should proceed.   I understand that I will need to 
back-up the existing, create a new hosted-engine on the new storage, specifying 
the backup a reference.

I just would like to see a step-by-step, so I know I am doing everything, and 
in the right order.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/DODUPYRCWGZTTDKSFE4GIZ6IYJSJOEW2/

[ovirt-users] Re: oVirt 4.3.10 RHEL 7.9 support

[matthew.st...@fujitsu.com]

I'm running Oracle Linux Virtualization Manager 4.3.6 (ie oVirt 4.3.6) on 
Oracle Linux 7u9 with their UEK6 kernel. 

Only issue was with V2V migration (VMware to OLVM) and that was due to a 
missing package (qemu-block-curl).   [Pulling the missing package from Oracle's 
developer repository, as instructed, solved the problem.]

-Original Message-
From: KSNull Zero  
Sent: Wednesday, October 28, 2020 7:09 AM
To: users@ovirt.org
Subject: [ovirt-users] oVirt 4.3.10 RHEL 7.9 support

Hello!
Does oVirt 4.3.10 supports RHEL 7.9 hosts ?
Is it safe to update ovirt 4.3.10 hosts to the latest RHEL 7.9 ?
Thank you.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PIIY2ZW6UNELSFJSAYVV7U5F56RJ473A/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/DKOB7TIAMERP3ZWUAY5RV252IB5U6YS5/

[ovirt-users] Remove VM that failed being built from template

[matthew.st...@fujitsu.com]

oVirt 4.3.6

Attempted to build 10 VMs from a template, concurrently, and apparently 
overloaded the 1GB link to the iSCSI storage.  I now have four VMs hung in the 
Locked connection on the display, and no means to cancel, remove them.

The all have 'Failed to complete VM  creation.' log entries, under Events.

Any suggestions on how to address?




___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TUUDKLPROGNL4MTFNG5VOP7UJM5NPWN6/

[ovirt-users] Need assistance in migrating between iSCSI arrays.

[matthew.st...@fujitsu.com]

To get a project going, I used an iSCSI SAN array of limited storage, while 
waiting to obtain, and make operational another iSCSI SAN of considerably more 
storage.

I've attached the new iSCSI array to my cluster of hosts, attached a number of 
LUNs as additional storage domains, and move my collection of ISO and disk 
images to the new storage. I also detached and removed the old iSCSI storage 
domains I no longer need.  I'm now down to the last two Storage Domains.  The 
hosted_engine, and the last DATA domain, holding templates.

Now the hard part reared its head.

I need to completely detach the old iSCSI SAN array, which means I need to 
migrate the hosted-engine, and my small collection of templates, which I 
created on the old iSCSI array, to storage domains on the new iSCSI array.

I'm looking for recommendations on how to do both.

As to the details, I am running Oracle Linux Virtualization Manager 4.3.6, in 
hosted-engine mode, which means I am running oVirt 4.3.6, in hosted-engine mode.

Note: I have configured the first three hosts in the cluster to support 
hosted-engine, so the hosted-engine can be moved around, for system maintenance.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KSOS5YGYZKMZHG3CUY7KD3URA4FSC7EC/

[ovirt-users] Re: CEPH - Opinions and ROI

[matthew.st...@fujitsu.com]

If you can’t go direct, how about round about, with an iSCSI gateway.

From: Jeremey Wise 
Sent: Wednesday, September 30, 2020 11:33 PM
To: users 
Subject: [ovirt-users] CEPH - Opinions and ROI


I have for many years used gluster because..well.  3 nodes.. and so long as I 
can pull a drive out.. I can get my data.. and with three copies.. I have much 
higher chance of getting it.

Downsides to gluster: Slower (its my home..meh... and I have SSD to avoid MTBF 
issues ) and with VDO.. and thin provisioning.. not had issue.

BUT  gluster seems to be falling out of favor.  Especially as I move 
towards OCP.

So..  CEPH.  I have one SSD in each of the three servers.  so I have some space 
to play.

I googled around.. and find no clean deployment notes and guides on CEPH + 
oVirt.

Comments or ideas..

--
penguinpages.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4V6NKC62LW42S7UU27KEYRBVB6NFSIS/

[ovirt-users] oVirt networking.

[matthew.st...@fujitsu.com]

oVirt newbie starting with 4.4.2.

Any good documentation on setting up networking?

I want to bond my two network interfaces.  The native interface will be uses 
for management.   All other traffic will be over tagged vlans.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/AVIVAWV6CJHOKMY46NLE2HA2P76S66X2/

[ovirt-users] Re: Populating ISO storage domain

[matthew.st...@fujitsu.com]

It is being mounted under /rhev/data-center/mnt/  on the hosts, but is not 
being self-hosted engine.

From: matthew.st...@fujitsu.com 
Sent: Saturday, September 26, 2020 4:17 PM
To: Edward Berger 
Cc: users@ovirt.org
Subject: [ovirt-users] Re: Populating ISO storage domain

I setup the folder and the files with 36:36 with a mode of 775 on the directory 
and 644 on the files.

Hours later, still not being read.

From: Edward Berger mailto:edwber...@gmail.com>>
Sent: Saturday, September 26, 2020 2:01 PM
To: Stier, Matthew mailto:matthew.st...@fujitsu.com>>
Cc: users@ovirt.org<mailto:users@ovirt.org>
Subject: Re: [ovirt-users] Populating ISO storage domain

If its in an NFS folder, make sure the ownership is vdsm:kvm (36:36)


On Sat, Sep 26, 2020 at 2:57 PM 
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> 
mailto:matthew.st...@fujitsu.com>> wrote:
I’ve created and ISO storage domain, and placed ISO’s in the export path do not 
show up under Storage > Storage Domains > iso > images; nor as available images 
which creating a new VM.

Haven’t located method get them noticed.   There is a greyed out ‘scan disk’ 
option.

What is the proper method to install ISO images.
___
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to 
users-le...@ovirt.org<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/M6QYBMNT43MTWXGKDNHDY3BOPSVMLXTP/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IXARC4TG2OY7ANJ5HGBQS3CAQ6S4PTQ6/

[ovirt-users] Re: Populating ISO storage domain

[matthew.st...@fujitsu.com]

I setup the folder and the files with 36:36 with a mode of 775 on the directory 
and 644 on the files.

Hours later, still not being read.

From: Edward Berger 
Sent: Saturday, September 26, 2020 2:01 PM
To: Stier, Matthew 
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Populating ISO storage domain

If its in an NFS folder, make sure the ownership is vdsm:kvm (36:36)


On Sat, Sep 26, 2020 at 2:57 PM 
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com> 
mailto:matthew.st...@fujitsu.com>> wrote:
I’ve created and ISO storage domain, and placed ISO’s in the export path do not 
show up under Storage > Storage Domains > iso > images; nor as available images 
which creating a new VM.

Haven’t located method get them noticed.   There is a greyed out ‘scan disk’ 
option.

What is the proper method to install ISO images.
___
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to 
users-le...@ovirt.org<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/M6QYBMNT43MTWXGKDNHDY3BOPSVMLXTP/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KVHRFQTLFT2VT2YIFSRU2CPVOVZCCSDW/

[ovirt-users] Populating ISO storage domain

[matthew.st...@fujitsu.com]

I've created and ISO storage domain, and placed ISO's in the export path do not 
show up under Storage > Storage Domains > iso > images; nor as available images 
which creating a new VM.

Haven't located method get them noticed.   There is a greyed out 'scan disk' 
option.

What is the proper method to install ISO images.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/M6QYBMNT43MTWXGKDNHDY3BOPSVMLXTP/

[ovirt-users] Re: Recreating ISO storage domain

[matthew.st...@fujitsu.com]

Got this fixed.  Ignore.

From: matthew.st...@fujitsu.com 
Sent: Saturday, September 26, 2020 1:39 PM
To: users@ovirt.org
Subject: [ovirt-users] Recreating ISO storage domain

I have created a three host oVirt cluster using 4.4.2.

I created an ISO storage domain to hold my collection of ISO images, and then 
decided to migrate it to a better location.

I placed the storage domain in maintenance mode, end then removed it.

When I when to recreate it add the new location, I found that the 'ISO' storage 
domain was no longer an options.

What do I need to do to re-enable it, so I can re-create the storage domain.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/K2ISXQS6EWUELWXTWNWK22SON6PHKYTG/